Matthew Wilcox [Tue, 13 Oct 2020 23:53:22 +0000 (16:53 -0700)]
mm: account PMD tables like PTE tables
We account the PTE level of the page tables to the process in order to
make smarter OOM decisions and help diagnose why memory is fragmented.
For these same reasons, we should account pages allocated for PMDs. With
larger process address spaces and ASLR, the number of PMDs in use is
higher than it used to be so the inaccuracy is starting to matter.
[rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor] Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Tue, 13 Oct 2020 23:53:19 +0000 (16:53 -0700)]
selftests/vm: fix incorrect gcc invocation in some cases
Avoid accidental wrong builds, due to built-in rules working just a little
bit too well--but not quite as well as required for our situation here.
In other words, "make userfaultfd" (for example) is supposed to fail to
build at all, because this Makefile only supports either "make" (all), or
"make /full/path". However, the built-in rules, if not suppressed, will
pick up CFLAGS and the initial LDLIBS (but not the target-specific LDLIBS,
because those are only set for the full path target!). This causes it to
get pretty far into building things despite using incorrect values such as
an *occasionally* incomplete LDLIBS value.
Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Link: https://lkml.kernel.org/r/20200915012901.1655280-3-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Tue, 13 Oct 2020 23:53:16 +0000 (16:53 -0700)]
selftests/vm: fix false build success on the second and later attempts
Patch series "selftests/vm: fix some minor aggravating factors in the Makefile".
This fixes a couple of minor aggravating factors that I ran across while
trying to do some changes in selftests/vm. These are simple things, but
like most things with GNU Make, it's rarely obvious what's wrong until you
understand *the entire Makefile and all of its includes*.
So while there is, of course, joy in learning those details, I thought I'd
fix these little things, so as to allow others to skip out on the Joy if
they so choose. :)
First of all, if you have an item (let's choose userfaultfd for an
example) that fails to build, you might do this:
$ make -j32
# ...you observe a failed item in the threaded output
# OK, let's get a closer look
$ make
# ...but now the build quietly "succeeds".
That's what Patch 0001 fixes.
Second, if you instead attempt this approach for your closer look (a casual
mistake, as it's not supported):
$ make userfaultfd
# ...userfaultfd fails to link, due to incomplete LDLIBS
That's what Patch 0002 fixes.
This patch (of 2):
If one or more of these selftest fail to build, then after the first
failure, subsequent invocations of "make" will make it appear that there
are no build failures, after all.
That's because the failed build products remain, with up-to-date
timestamps, thus tricking Make (and you!) into believing that there's
nothing else to build.
Fix this by telling Make to delete targets that didn't completely
succeed.
Ralph Campbell [Tue, 13 Oct 2020 23:53:13 +0000 (16:53 -0700)]
mm/memcg: fix device private memcg accounting
The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled. Fix this by checking for non_swap_entry() after handling
device private swap PTEs.
I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup. Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com
xFixes: 172dd35c9e64 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bharata B Rao [Tue, 13 Oct 2020 23:53:09 +0000 (16:53 -0700)]
mm: memcg/slab: uncharge during kmem_cache_free_bulk()
Object cgroup charging is done for all the objects during allocation, but
during freeing, uncharging ends up happening for only one object in the
case of bulk allocation/freeing.
Fix this by having a separate call to uncharge all the objects from
kmem_cache_free_bulk() and by modifying memcg_slab_free_hook() to take
care of bulk uncharging.
Fixes: 3891035db7b6 ("mm: memcg/slab: save obj_cgroup for non-root slab objects" Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Roman Gushchin <guro@fb.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201009060423.390479-1-bharata@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miaohe Lin [Tue, 13 Oct 2020 23:53:05 +0000 (16:53 -0700)]
mm: memcontrol: reword obsolete comment of mem_cgroup_unmark_under_oom()
Since commit 54b35c586383 ("memcg: make oom_lock 0 and 1 based rather than
counter"), the mem_cgroup_unmark_under_oom() is added and the comment of
the mem_cgroup_oom_unlock() is moved here. But this comment make no sense
here because mem_cgroup_oom_lock() does not operate on under_oom field.
So we reword the comment as this would be helpful. [Thanks Michal Hocko
for rewording this comment.]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Link: https://lkml.kernel.org/r/20200930095336.21323-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miaohe Lin [Tue, 13 Oct 2020 23:53:02 +0000 (16:53 -0700)]
mm/page_counter: correct the obsolete func name in the comment of page_counter_try_charge()
Since commit fbb5c2610e4e ("mm: rename page_counter's count/limit into
usage/max"), page_counter_limit() is renamed to page_counter_set_max().
So replace page_counter_limit with page_counter_set_max in comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Link: https://lkml.kernel.org/r/20200917113629.14382-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Muchun Song [Tue, 13 Oct 2020 23:52:59 +0000 (16:52 -0700)]
mm: memcontrol: add the missing numa_stat interface for cgroup v2
In the cgroup v1, we have a numa_stat interface. This is useful for
providing visibility into the numa locality information within an memcg
since the pages are allowed to be allocated from any physical node. One
of the use cases is evaluating application performance by combining this
information with the application's CPU allocation. But the cgroup v2 does
not. So this patch adds the missing information.
Suggested-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Zefan Li <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20200916100030.71698-2-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Tue, 13 Oct 2020 23:52:56 +0000 (16:52 -0700)]
mm/memcg: unify swap and memsw page counters
The swap page counter is v2 only while memsw is v1 only. As v1 and v2
controllers cannot be active at the same time, there is no point to keep
both swap and memsw page counters in mem_cgroup. The previous patch has
made sure that memsw page counter is updated and accessed only when in v1
code paths. So it is now safe to alias the v1 memsw page counter to v2
swap page counter. This saves 14 long's in the size of mem_cgroup. This
is a saving of 112 bytes for 64-bit archs.
While at it, also document which page counters are used in v1 and/or v2.
Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200914024452.19167-4-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Tue, 13 Oct 2020 23:52:52 +0000 (16:52 -0700)]
mm/memcg: simplify mem_cgroup_get_max()
mem_cgroup_get_max() used to get memory+swap max from both the v1 memsw
and v2 memory+swap page counters & return the maximum of these 2 values.
This is redundant and it is more efficient to just get either the v1 or
the v2 values depending on which one is currently in use.
[longman@redhat.com: v4] Link: https://lkml.kernel.org/r/20200914150928.7841-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200914024452.19167-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Tue, 13 Oct 2020 23:52:49 +0000 (16:52 -0700)]
mm/memcg: clean up obsolete enum charge_type
Patch series "mm/memcg: Miscellaneous cleanups and streamlining", v2.
This patch (of 3):
Since commit 5d073237219a ("mm: memcontrol: rewrite uncharge API") and
commit 7b5e9dd291f7 ("mm: memcontrol: rewrite charge API") in v3.17, the
enum charge_type was no longer used anywhere. However, the enum itself
was not removed at that time. Remove the obsolete enum charge_type now.
Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Chris Down <chris@chrisdown.name> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Yafang Shao <laoar.shao@gmail.com> Link: https://lkml.kernel.org/r/20200914024452.19167-1-longman@redhat.com Link: https://lkml.kernel.org/r/20200914024452.19167-2-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Tue, 13 Oct 2020 23:52:42 +0000 (16:52 -0700)]
mm: memcg/slab: fix racy access to page->mem_cgroup in mem_cgroup_from_obj()
mem_cgroup_from_obj() checks the lowest bit of the page->mem_cgroup
pointer to determine if the page has an attached obj_cgroup vector instead
of a regular memcg pointer. If it's not set, it simple returns the
page->mem_cgroup value as a struct mem_cgroup pointer.
The commit faa69fb579fc ("mm: memcg/slab: use a single set of kmem_caches
for all allocations") changed the moment when this bit is set: if
previously it was set on the allocation of the slab page, now it can be
set well after, when the first accounted object is allocated on this page.
It opened a race: if page->mem_cgroup is set concurrently after the first
page_has_obj_cgroups(page) check, a pointer to the obj_cgroups array can
be returned as a memory cgroup pointer.
A simple check for page->mem_cgroup pointer for NULL before the
page_has_obj_cgroups() check fixes the race. Indeed, if the pointer is
not NULL, it's either a simple mem_cgroup pointer or a pointer to
obj_cgroup vector. The pointer can be asynchronously changed from NULL to
(obj_cgroup_vec | 0x1UL), but can't be changed from a valid memcg pointer
to objcg vector or back.
If the object passed to mem_cgroup_from_obj() is a slab object and
page->mem_cgroup is NULL, it means that the object is not accounted, so
the function must return NULL.
I've discovered the race looking at the code, so far I haven't seen it in
the wild.
Fixes: faa69fb579fc ("mm: memcg/slab: use a single set of kmem_caches for all allocations") Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lkml.kernel.org/r/20200910022435.2773735-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: memcontrol: use the preferred form for passing the size of a structure type
Use the preferred form for passing the size of a structure type. The
alternative form where the structure type is spelled out hurts readability
and introduces an opportunity for a bug when the object type is changed
but the corresponding object identifier to which the sizeof operator is
applied is not.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Link: https://lkml.kernel.org/r/773e013ff2f07fe2a0b47153f14dea054c0c04f1.1596214831.git.gustavoars@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: memcontrol: use flex_array_size() helper in memcpy()
Make use of the flex_array_size() helper to calculate the size of a
flexible array member within an enclosing structure.
This helper offers defense-in-depth against potential integer overflows,
while at the same time makes it explicitly clear that we are dealing with
a flexible array member.
Also, remove unnecessary braces.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Link: https://lkml.kernel.org/r/ddd60dae2d9aea1ccdd2be66634815c93696125e.1596214831.git.gustavoars@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ira Weiny [Tue, 13 Oct 2020 23:52:33 +0000 (16:52 -0700)]
mm/memremap.c: convert devmap static branch to {inc,dec}
While reviewing Protection Key Supervisor support it was pointed out that
using a counter to track static branch enable was an anti-pattern which
was better solved using the provided static_branch_{inc,dec} functions.[1]
Fix up devmap_managed_key to work the same way. Also this should be safer
because there is a very small (very unlikely) race when multiple callers
try to enable at the same time.
Miaohe Lin [Tue, 13 Oct 2020 23:52:21 +0000 (16:52 -0700)]
mm/page_io.c: remove useless out label in __swap_writepage()
The out label is only used in one place and return ret directly without
something like resource cleanup or lock release and so on. So we should
remove this jump label and do some cleanup.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200927124032.22521-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miaohe Lin [Tue, 13 Oct 2020 23:52:15 +0000 (16:52 -0700)]
mm/swap.c: fix confusing comment in release_pages()
Since commit 01e0430798d6 ("mm: devmap: refactor 1-based refcounting for
ZONE_DEVICE pages"), we have renamed the func put_devmap_managed_page() to
page_is_devmap_managed().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Link: https://lkml.kernel.org/r/20200905084453.19353-1-linmiaohe@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yu Zhao [Tue, 13 Oct 2020 23:52:11 +0000 (16:52 -0700)]
mm: remove superfluous __ClearPageActive()
To activate a page, mark_page_accessed() always holds a reference on it.
It either gets a new reference when adding a page to
lru_pvecs.activate_page or reuses an existing one it previously got when
it added a page to lru_pvecs.lru_add. So it doesn't call SetPageActive()
on a page that doesn't have any reference left. Therefore, the race is
impossible these days (I didn't brother to dig into its history).
For other paths, namely reclaim and migration, a reference count is always
held while calling SetPageActive() on a page.
SetPageSlabPfmemalloc() also uses SetPageActive(), but it's irrelevant to
LRU pages.
Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/20200818184704.3625199-2-yuzhao@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yu Zhao [Tue, 13 Oct 2020 23:52:08 +0000 (16:52 -0700)]
mm: remove activate_page() from unuse_pte()
We don't initially add anon pages to active lruvec after commit b6df587f15fc ("mm/vmscan: protect the workingset on anonymous LRU").
Remove activate_page() from unuse_pte(), which seems to be missed by the
commit. And make the function static while we are at it.
Before the commit, we called lru_cache_add_active_or_unevictable() to add
new ksm pages to active lruvec. Therefore, activate_page() wasn't
necessary for them in the first place.
Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: http://lkml.kernel.org/r/20200818184704.3625199-1-yuzhao@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gao Xiang [Tue, 13 Oct 2020 23:52:04 +0000 (16:52 -0700)]
swap: rename SWP_FS to SWAP_FS_OPS to avoid ambiguity
SWP_FS is used to make swap_{read,write}page() go through the filesystem,
and it's only used for swap files over NFS for now. Otherwise it will
directly submit IO to blockdev according to swapfile extents reported by
filesystems in advance.
As Matthew pointed out [1], SWP_FS naming is somewhat confusing, so let's
rename to SWP_FS_OPS.
John Hubbard [Tue, 13 Oct 2020 23:52:01 +0000 (16:52 -0700)]
mm/gup: protect unpin_user_pages() against npages==-ERRNO
As suggested by Dan Carpenter, fortify unpin_user_pages() just a bit,
against a typical caller mistake: check if the npages arg is really a
-ERRNO value, which would blow up the unpinning loop: WARN and return.
If this new WARN_ON() fires, then the system *might* be leaking pages (by
leaving them pinned), but probably not. More likely, gup/pup returned a
hard -ERRNO error to the caller, who erroneously passed it here.
Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lkml.kernel.org/r/20200917065706.409079-1-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Barry Song [Tue, 13 Oct 2020 23:51:58 +0000 (16:51 -0700)]
mm/gup: don't permit users to call get_user_pages with FOLL_LONGTERM
gup prohibits users from calling get_user_pages() with FOLL_PIN. But it
allows users to call get_user_pages() with FOLL_LONGTERM only. It seems
insensible.
Since FOLL_LONGTERM is a stricter case of FOLL_PIN, we should prohibit
users from calling get_user_pages() with FOLL_LONGTERM while not with
FOLL_PIN.
mm/gup_benchmark.c used to be the only user who did this improperly.
But it has been fixed by moving to use pin_user_pages().
Barry Song [Tue, 13 Oct 2020 23:51:54 +0000 (16:51 -0700)]
mm/gup_benchmark: use pin_user_pages for FOLL_LONGTERM flag
According to Documentation/core-api/pin_user_pages.rst, FOLL_PIN is a
prerequisite to FOLL_LONGTERM. Another way of saying that is,
FOLL_LONGTERM is a specific case, more restrictive case of FOLL_PIN.
Almost all kernel modules are using pin_user_pages() with FOLL_LONGTERM,
mm/gup_benchmark.c seems to the only exception in which FOLL_PIN is not a
prerequisite to FOLL_LONGTERM.
Barry Song [Tue, 13 Oct 2020 23:51:51 +0000 (16:51 -0700)]
mm/gup_benchmark: update the documentation in Kconfig
In the beginning, mm/gup_benchmark.c supported get_user_pages_fast() only,
but right now, it supports the benchmarking of a couple of
get_user_pages() related calls like:
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lkml.kernel.org/r/20200821032546.19992-1-song.bao.hua@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yafang Shao [Tue, 13 Oct 2020 23:51:47 +0000 (16:51 -0700)]
mm, fadvise: improve the expensive remote LRU cache draining after FADV_DONTNEED
Our users reported that there're some random latency spikes when their RT
process is running. Finally we found that latency spike is caused by
FADV_DONTNEED. Which may call lru_add_drain_all() to drain LRU cache on
remote CPUs, and then waits the per-cpu work to complete. The wait time
is uncertain, which may be tens millisecond.
That behavior is unreasonable, because this process is bound to a specific
CPU and the file is only accessed by itself, IOW, there should be no
pagecache pages on a per-cpu pagevec of a remote CPU. That unreasonable
behavior is partially caused by the wrong comparation of the number of
invalidated pages and the number of the target. For example,
if (count < (end_index - start_index + 1))
The count above is how many pages were invalidated in the local CPU, and
(end_index - start_index + 1) is how many pages should be invalidated.
The usage of (end_index - start_index + 1) is incorrect, because they are
virtual addresses, which may not mapped to pages. Besides that, there may
be holes between start and end. So we'd better check whether there are
still pages on per-cpu pagevec after drain the local cpu, and then decide
whether or not to call lru_add_drain_all().
After I applied it with a hotfix to our production environment, most of
the lru_add_drain_all() can be avoided.
We dereference page->mapping and page->index directly after calling
find_subpage() and these fields are not valid for tail pages. While
commit 22ccff1f7493 ("mm: page cache: store only head pages in i_pages")
introduced the call to find_subpage(), the problem existed prior to this;
I'm going to suggest all the way back to when THPs first existed.
The user-visible effects of this are almost negligible. To hit it, you
have to mmap a tmpfs file at an unaligned address and then it's only a
disabled optimisation causing page faults to happen more frequently than
they otherwise would.
Fix this by keeping both head and page pointers and checking the
appropriate one. We could use page_mapping() and page_to_index(), but
that's higher overhead.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Link: https://lkml.kernel.org/r/20200911012532.24761-1-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert shmem_getpage_gfp() (the only remaining caller of
find_lock_entry()) to cope with a head page being returned instead of
the subpage for the index.
[willy@infradead.org: fix BUG()s]
Link https://lore.kernel.org/linux-mm/20200912032042.GA6583@casper.infradead.org/
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Link: https://lkml.kernel.org/r/20200910183318.20139-8-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: convert find_get_entry to return the head page
There are only four callers remaining of find_get_entry().
get_shadow_from_swap_cache() only wants to see shadow entries and doesn't
care about which page is returned. Push the find_subpage() call into
find_lock_entry(), find_get_incore_page() and pagecache_get_page().
[willy@infradead.org: fix oops] Link: https://lkml.kernel.org/r/20200914112738.GM6583@casper.infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Link: https://lkml.kernel.org/r/20200910183318.20139-7-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
i915: use find_lock_page instead of find_lock_entry
i915 does not want to see value entries. Switch it to use
find_lock_page() instead, and remove the export of find_lock_entry().
Move find_lock_entry() and find_get_entry() to mm/internal.h to discourage
any future use.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Link: https://lkml.kernel.org/r/20200910183318.20139-6-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of calling find_get_entry() for every page index, use an XArray
iterator to skip over NULL entries, and avoid calling get_page(),
because we only want the swap entries.
[willy@infradead.org: fix LTP soft lockups] Link: https://lkml.kernel.org/r/20200914165032.GS6583@casper.infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Qian Cai <cai@redhat.com> Link: https://lkml.kernel.org/r/20200910183318.20139-4-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current code does not protect against swapoff of the underlying
swap device, so this is a bug fix as well as a worthwhile reduction in
code complexity.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Auld <matthew.auld@intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Link: https://lkml.kernel.org/r/20200910183318.20139-3-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: factor find_get_incore_page out of mincore_page
Patch series "Return head pages from find_*_entry", v2.
This patch series started out as part of the THP patch set, but it has
some nice effects along the way and it seems worth splitting it out and
submitting separately.
Currently find_get_entry() and find_lock_entry() return the page
corresponding to the requested index, but the first thing most callers do
is find the head page, which we just threw away. As part of auditing all
the callers, I found some misuses of the APIs and some plain
inefficiencies that I've fixed.
The diffstat is unflattering, but I added more kernel-doc and a new wrapper.
This patch (of 8);
Provide this functionality from the swap cache. It's useful for
more than just mincore().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Huang Ying <ying.huang@intel.com> Link: https://lkml.kernel.org/r/20200910183318.20139-1-willy@infradead.org Link: https://lkml.kernel.org/r/20200910183318.20139-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__dump_page() checks i_dentry is fetchable and i_ino is earlier in the
struct than i_ino, so it ought to work fine, but it's possible that struct
randomisation has reordered i_ino after i_dentry and the pointer is just
wild enough that i_dentry is fetchable and i_ino isn't.
Also print the inode number if the dentry is invalid.
Reported-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lkml.kernel.org/r/20200819185710.28180-1-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joao Martins [Tue, 13 Oct 2020 23:51:06 +0000 (16:51 -0700)]
device-dax: add a range mapping allocation attribute
Add a sysfs attribute which denotes a range from the dax region to be
allocated. It's an write only @mapping sysfs attribute in the format of
'<start>-<end>' to allocate a range. @start and @end use hexadecimal
values and the @pgoff is implicitly ordered wrt to previous writes to
@mapping sysfs e.g. a write of a range of length 1G the pgoff is
0..1G(-4K), a second write will use @pgoff for 1G+4K..<size>.
This range mapping interface is useful for:
1) Application which want to implement its own allocation logic, and
thus pick the desired ranges from dax_region.
2) For use cases like VMM fast restart[0] where after kexec we want
to the same gpa<->phys mappings (as originally created before kexec).
Introduce a new module parameter for dax_hmem which initializes all region
devices as free, rather than allocating a pagemap for the region by
default.
All hmem devices created with dax_hmem.region_idle=1 will have full
available size for creating dynamic dax devices.
Dan Williams [Tue, 13 Oct 2020 23:50:55 +0000 (16:50 -0700)]
device-dax: add an 'align' attribute
Introduce a device align attribute. While doing so, rename the region
align attribute to be more explicitly named as so, but keep it named as
@align to retain the API for tools like daxctl.
Changes on align may not always be valid, when say certain mappings were
created with 2M and then we switch to 1G. So, we validate all ranges
against the new value being attempted, post resizing.
Joao Martins [Tue, 13 Oct 2020 23:50:50 +0000 (16:50 -0700)]
device-dax: make align a per-device property
Introduce @align to struct dev_dax.
When creating a new device, we still initialize to the default dax_region
@align. Child devices belonging to a region may wish to keep a different
alignment property instead of a global region-defined one.
Dan Williams [Tue, 13 Oct 2020 23:50:45 +0000 (16:50 -0700)]
device-dax: introduce 'mapping' devices
In support of interrogating the physical address layout of a device with
dis-contiguous ranges, introduce a sysfs directory with 'start', 'end',
and 'page_offset' attributes. The alternative is trying to parse
/proc/iomem, and that file will not reflect the extent layout until the
device is enabled.
Dan Williams [Tue, 13 Oct 2020 23:50:39 +0000 (16:50 -0700)]
device-dax: add dis-contiguous resource support
Break the requirement that device-dax instances are physically contiguous.
With this constraint removed it allows fragmented available capacity to
be fully allocated.
This capability is useful to mitigate the "noisy neighbor" problem with
memory-side-cache management for virtual machines, or any other scenario
where a platform address boundary also designates a performance boundary.
For example a direct mapped memory side cache might rotate cache colors at
1GB boundaries. With dis-contiguous allocations a device-dax instance
could be configured to contain only 1 cache color.
It also satisfies Joao's use case (see link) for partitioning memory for
exclusive guest access. It allows for a future potential mode where the
host kernel need not allocate 'struct page' capacity up-front.
Dan Williams [Tue, 13 Oct 2020 23:50:34 +0000 (16:50 -0700)]
mm/memremap_pages: support multiple ranges per invocation
In support of device-dax growing the ability to front physically
dis-contiguous ranges of memory, update devm_memremap_pages() to track
multiple ranges with a single reference counter and devm instance.
Convert all [devm_]memremap_pages() users to specify the number of ranges
they are mapping in their 'struct dev_pagemap' instance.
Dan Williams [Tue, 13 Oct 2020 23:50:29 +0000 (16:50 -0700)]
mm/memremap_pages: convert to 'struct range'
The 'struct resource' in 'struct dev_pagemap' is only used for holding
resource span information. The other fields, 'name', 'flags', 'desc',
'parent', 'sibling', and 'child' are all unused wasted space.
This is in preparation for introducing a multi-range extension of
devm_memremap_pages().
The bulk of this change is unwinding all the places internal to libnvdimm
that used 'struct resource' unnecessarily, and replacing instances of
'struct dev_pagemap'.res with 'struct dev_pagemap'.range.
P2PDMA had a minor usage of the resource flags field, but only to report
failures with "%pR". That is replaced with an open coded print of the
range.
Dan Williams [Tue, 13 Oct 2020 23:50:24 +0000 (16:50 -0700)]
device-dax: add resize support
Make the device-dax 'size' attribute writable to allow capacity to be
split between multiple instances in a region. The intended consumers of
this capability are users that want to split a scarce memory resource
between device-dax and System-RAM access, or users that want to have
multiple security domains for a large region.
By default the hmem instance provider allocates an entire region to the
first instance. The process of creating a new instance (assuming a
region-id of 0) is find the region and trigger the 'create' attribute
which yields an empty instance to configure. For example:
Dan Williams [Tue, 13 Oct 2020 23:50:13 +0000 (16:50 -0700)]
device-dax: introduce 'seed' devices
Add a seed device concept for dynamic dax regions to be able to split the
region amongst multiple sub-instances. The seed device, similar to
libnvdimm seed devices, is a device that starts with zero capacity
allocated and unbound to a driver. In contrast to libnvdimm seed devices
explicit 'create' and 'delete' interfaces are added to the region to
trigger seeds to be created and unused devices to be reclaimed. The
explicit create and delete replaces implicit create as a side effect of
probe and implicit delete when writing 0 to the size that libnvdimm
implements.
Delete can be performed on any 0-sized and idle device. This avoids the
gymnastics of needing to move device_unregister() to its own async
context. Specifically, it avoids the deadlock of deleting a device via
one of its own attributes. It is also less surprising to userspace which
never sees an extra device it did not request.
For now just add the device creation, teardown, and ->probe() prevention.
A later patch will arrange for the 'dax/size' attribute to be writable to
allocate capacity from the region.
In preparation for introducing seed devices the dax-bus core needs to be
able to intercept ->probe() and ->remove() operations. Towards that end
arrange for the bus and drivers to switch from raw 'struct device' driver
operations to 'struct dev_dax' typed operations.
Dan Williams [Tue, 13 Oct 2020 23:50:03 +0000 (16:50 -0700)]
device-dax: add an allocation interface for device-dax instances
In preparation for a facility that enables dax regions to be sub-divided,
introduce infrastructure to track and allocate region capacity.
The new dax_region/available_size attribute is only enabled for volatile
hmem devices, not pmem devices that are defined by nvdimm namespace
boundaries. This is per Jeff's feedback the last time dynamic device-dax
capacity allocation support was discussed.
Dan Williams [Tue, 13 Oct 2020 23:49:58 +0000 (16:49 -0700)]
device-dax/kmem: replace release_resource() with release_mem_region()
Towards removing the mode specific @dax_kmem_res attribute from the
generic 'struct dev_dax', and preparing for multi-range support, change
the kmem driver to use the idiomatic release_mem_region() to pair with the
initial request_mem_region(). This also eliminates the need to open code
the release of the resource allocated by request_mem_region().
As there are no more dax_kmem_res users, delete this struct member.
Dan Williams [Tue, 13 Oct 2020 23:49:53 +0000 (16:49 -0700)]
device-dax/kmem: move resource name tracking to drvdata
Towards removing the mode specific @dax_kmem_res attribute from the
generic 'struct dev_dax', and preparing for multi-range support, move
resource name tracking to driver data. The memory for the resource name
needs to have its own lifetime separate from the device bind lifetime for
cases where the driver is unbound, but the kmem range could not be
unplugged from the page allocator.
Dan Williams [Tue, 13 Oct 2020 23:49:48 +0000 (16:49 -0700)]
device-dax/kmem: introduce dax_kmem_range()
Towards removing the mode specific @dax_kmem_res attribute from the
generic 'struct dev_dax', and preparing for multi-range support, teach the
driver to calculate the hotplug range from the device range. The hotplug
range is the trivially calculated memory-block-size aligned version of the
device range.
Dan Williams [Tue, 13 Oct 2020 23:49:43 +0000 (16:49 -0700)]
device-dax: make pgmap optional for instance creation
The passed in dev_pagemap is only required in the pmem case as the
libnvdimm core may have reserved a vmem_altmap for dev_memremap_pages() to
place the memmap in pmem directly. In the hmem case there is no agent
reserving an altmap so it can all be handled by a core internal default.
Pass the resource range via a new @range property of 'struct
dev_dax_data'.
Dan Williams [Tue, 13 Oct 2020 23:49:33 +0000 (16:49 -0700)]
device-dax: drop the dax_region.pfn_flags attribute
All callers specify the same flags to alloc_dax_region(), so there is no
need to allow for anything other than PFN_DEV|PFN_MAP, or carry a
->pfn_flags around on the region. Device-dax instances are always page
backed.
Dan Williams [Tue, 13 Oct 2020 23:49:28 +0000 (16:49 -0700)]
ACPI: HMAT: attach a device for each soft-reserved range
The hmem enabling in commit b7f0a1ddc45b ("ACPI: NUMA: HMAT: Register
"soft reserved" memory as an "hmem" device") only registered ranges to the
hmem driver for each soft-reservation that also appeared in the HMAT.
While this is meant to encourage platform firmware to "do the right thing"
and publish an HMAT, the corollary is that platforms that fail to publish
an accurate HMAT will strand memory from Linux usage. Additionally, the
"efi_fake_mem" kernel command line option enabling will strand memory by
default without an HMAT.
Arrange for "soft reserved" memory that goes unclaimed by HMAT entries to
be published as raw resource ranges for the hmem driver to consume.
Include a module parameter to disable either this fallback behavior, or
the hmat enabling from creating hmem devices. The module parameter
requires the hmem device enabling to have unique name in the module
namespace: "device_hmem".
The driver depends on the architecture providing phys_to_target_node()
which is only x86 via numa_meminfo() and arm64 via a generic memblock
implementation.
In preparation to set a fallback value for dev_dax->target_node, introduce
generic fallback helpers for phys_to_target_node()
A generic implementation based on node-data or memblock was proposed, but
as noted by Mike:
"Here again, I would prefer to add a weak default for
phys_to_target_node() because the "generic" implementation is not really
generic.
The fallback to reserved ranges is x86 specfic because on x86 most of
the reserved areas is not in memblock.memory. AFAIK, no other
architecture does this."
The info message in the generic memory_add_physaddr_to_nid()
implementation is fixed up to properly reflect that
memory_add_physaddr_to_nid() communicates "online" node info and
phys_to_target_node() indicates "target / to-be-onlined" node info.
Dan Williams [Tue, 13 Oct 2020 23:49:18 +0000 (16:49 -0700)]
resource: report parent to walk_iomem_res_desc() callback
In support of detecting whether a resource might have been been claimed,
report the parent to the walk_iomem_res_desc() callback. For example, the
ACPI HMAT parser publishes "hmem" platform devices per target range.
However, if the HMAT is disabled / missing a fallback driver can attach
devices to the raw memory ranges as a fallback if it sees unclaimed /
orphan "Soft Reserved" resources in the resource tree.
Otherwise, find_next_iomem_res() returns a resource with garbage data from
the stack allocation in __walk_iomem_res_desc() for the res->parent field.
There are currently no users that expect ->child and ->sibling to be
valid, and the resource_lock would be needed to traverse them. Use a
compound literal to implicitly zero initialize the fields that are not
being returned in addition to setting ->parent.
Dan Williams [Tue, 13 Oct 2020 23:49:13 +0000 (16:49 -0700)]
ACPI: HMAT: refactor hmat_register_target_device to hmem_register_device
In preparation for exposing "Soft Reserved" memory ranges without an HMAT,
move the hmem device registration to its own compilation unit and make the
implementation generic.
The generic implementation drops usage acpi_map_pxm_to_online_node() that
was translating ACPI proximity domain values and instead relies on
numa_map_to_online_node() to determine the numa node for the device.
Dan Williams [Tue, 13 Oct 2020 23:49:08 +0000 (16:49 -0700)]
efi/fake_mem: arrange for a resource entry per efi_fake_mem instance
In preparation for attaching a platform device per iomem resource teach
the efi_fake_mem code to create an e820 entry per instance. Similar to
E820_TYPE_PRAM, bypass merging resource when the e820 map is sanitized.
Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5.
The device-dax facility allows an address range to be directly mapped
through a chardev, or optionally hotplugged to the core kernel page
allocator as System-RAM. It is the mechanism for converting persistent
memory (pmem) to be used as another volatile memory pool i.e. the current
Memory Tiering hot topic on linux-mm.
In the case of pmem the nvdimm-namespace-label mechanism can sub-divide
it, but that labeling mechanism is not available / applicable to
soft-reserved ("EFI specific purpose") memory [3]. This series provides a
sysfs-mechanism for the daxctl utility to enable provisioning of
volatile-soft-reserved memory ranges.
The motivations for this facility are:
1/ Allow performance differentiated memory ranges to be split between
kernel-managed and directly-accessed use cases.
2/ Allow physical memory to be provisioned along performance relevant
address boundaries. For example, divide a memory-side cache [4] along
cache-color boundaries.
3/ Parcel out soft-reserved memory to VMs using device-dax as a security
/ permissions boundary [5]. Specifically I have seen people (ab)using
memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the
device-dax interface on custom address ranges. A follow-on for the VM
use case is to teach device-dax to dynamically allocate 'struct page' at
runtime to reduce the duplication of 'struct page' space in both the
guest and the host kernel for the same physical pages.
In preparation for adding a new numa= option clean up the existing ones to
avoid ifdefs in numa_setup(), and provide feedback when the option is
numa=fake= option is invalid due to kernel config. The same does not need
to be done for numa=noacpi, since the capability is already hard disabled
at compile-time.
Hui Su [Tue, 13 Oct 2020 23:48:53 +0000 (16:48 -0700)]
mm,kmemleak-test.c: move kmemleak-test.c to samples dir
kmemleak-test.c is just a kmemleak test module, which also can not be used
as a built-in kernel module. Thus, i think it may should not be in mm
dir, and move the kmemleak-test.c to samples/kmemleak/kmemleak-test.c.
Fix the spelling of built-in by the way.
Signed-off-by: Hui Su <sh_def@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Rob Herring <robh@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Divya Indi <divya.indi@oracle.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: David Howells <dhowells@redhat.com> Link: https://lkml.kernel.org/r/20200925183729.GA172837@rlk Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Tue, 13 Oct 2020 23:48:50 +0000 (16:48 -0700)]
mm/kmemleak: rely on rcu for task stack scanning
kmemleak_scan() currently relies on the big tasklist_lock hammer to
stabilize iterating through the tasklist. Instead, this patch proposes
simply using rcu along with the rcu-safe for_each_process_thread flavor
(without changing scan semantics), which doesn't make use of
next_thread/p->thread_group and thus cannot race with exit. Furthermore,
any races with fork() and not seeing the new child should be benign as
it's not running yet and can also be detected by the next scan.
Avoiding the tasklist_lock could prove beneficial for performance
considering the scan operation is done periodically. I have seen
improvements of 30%-ish when doing similar replacements on very
pathological microbenchmarks (ie stressing get/setpriority(2)).
However my main motivation is that it's one less user of the global
lock, something that Linus has long time wanted to see gone eventually
(if ever) even if the traditional fairness issues has been dealt with
now with qrwlocks. Of course this is a very long ways ahead. This
patch also kills another user of the deprecated tsk->thread_group.
Abel Wu [Tue, 13 Oct 2020 23:48:47 +0000 (16:48 -0700)]
mm/slub: make add_full() condition more explicit
The commit below is incomplete, as it didn't handle the add_full() part.
commit 539114cbc0ba ("slub: remove useless kmem_cache_debug() before
remove_full()")
This patch checks for SLAB_STORE_USER instead of kmem_cache_debug(), since
that should be the only context in which we need the list_lock for
add_full().
Signed-off-by: Abel Wu <wuyun.wu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Liu Xiang <liu.xiang6@zte.com.cn> Link: https://lkml.kernel.org/r/20200811020240.1231-1-wuyun.wu@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Abel Wu [Tue, 13 Oct 2020 23:48:40 +0000 (16:48 -0700)]
mm/slub.c: branch optimization in free slowpath
The two conditions are mutually exclusive and gcc compiler will optimise
this into if-else-like pattern. Given that the majority of free_slowpath
is free_frozen, let's provide some hint to the compilers.
Tests (perf bench sched messaging -g 20 -l 400000, executed 10x
after reboot) are done and the summarized result:
Mateusz Nosek [Tue, 13 Oct 2020 23:48:34 +0000 (16:48 -0700)]
mm/slab.c: clean code by removing redundant if condition
The removed code was unnecessary and changed nothing in the flow, since in
case of returning NULL by 'kmem_cache_alloc_node' returning 'freelist'
from the function in question is the same as returning NULL.
Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: https://lkml.kernel.org/r/20200915230329.13002-1-mateusznosek0@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luo Jiaxing [Tue, 13 Oct 2020 23:48:30 +0000 (16:48 -0700)]
fs_parse: mark fs_param_bad_value() as static
We found the following warning when build kernel with W=1:
fs/fs_parser.c:192:5: warning: no previous prototype for `fs_param_bad_value' [-Wmissing-prototypes]
int fs_param_bad_value(struct p_log *log, struct fs_parameter *param)
^
CC drivers/usb/gadget/udc/snps_udc_core.o
And no header file define a prototype for this function, so we should mark
it as static.
Randy Dunlap [Tue, 13 Oct 2020 23:48:27 +0000 (16:48 -0700)]
fs/xattr.c: fix kernel-doc warnings for setxattr & removexattr
Fix kernel-doc warnings in fs/xattr.c:
../fs/xattr.c:251: warning: Function parameter or member 'dentry' not described in '__vfs_setxattr_locked'
../fs/xattr.c:251: warning: Function parameter or member 'name' not described in '__vfs_setxattr_locked'
../fs/xattr.c:251: warning: Function parameter or member 'value' not described in '__vfs_setxattr_locked'
../fs/xattr.c:251: warning: Function parameter or member 'size' not described in '__vfs_setxattr_locked'
../fs/xattr.c:251: warning: Function parameter or member 'flags' not described in '__vfs_setxattr_locked'
../fs/xattr.c:251: warning: Function parameter or member 'delegated_inode' not described in '__vfs_setxattr_locked'
../fs/xattr.c:458: warning: Function parameter or member 'dentry' not described in '__vfs_removexattr_locked'
../fs/xattr.c:458: warning: Function parameter or member 'name' not described in '__vfs_removexattr_locked'
../fs/xattr.c:458: warning: Function parameter or member 'delegated_inode' not described in '__vfs_removexattr_locked'
Fixes: f53d4529b8db ("xattr: break delegations in {set,remove}xattr") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Frank van der Linden <fllinden@amazon.com> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/7a3dd5a2-5787-adf3-d525-c203f9910ec4@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gang He [Tue, 13 Oct 2020 23:48:24 +0000 (16:48 -0700)]
ocfs2: fix potential soft lockup during fstrim
When we discard unused blocks on a mounted ocfs2 filesystem, fstrim
handles each block goup with locking/unlocking global bitmap meta-file
repeatedly. we should let fstrim thread take a break(if need) between
unlock and lock, this will avoid the potential soft lockup problem,
and also gives the upper applications more IO opportunities, these
applications are not blocked for too long at writing files.
Signed-off-by: Gang He <ghe@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Link: https://lkml.kernel.org/r/20200927015815.14904-1-ghe@suse.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rustam Kovhaev [Tue, 13 Oct 2020 23:48:17 +0000 (16:48 -0700)]
ntfs: add check for mft record size in superblock
Number of bytes allocated for mft record should be equal to the mft record
size stored in ntfs superblock as reported by syzbot, userspace might
trigger out-of-bounds read by dereferencing ctx->attr in ntfs_attr_find()
Borislav Petkov [Tue, 13 Oct 2020 23:48:14 +0000 (16:48 -0700)]
scripts/decodecode: add the capability to supply the program counter
So that comparing with objdump output from vmlinux can ease pinpointing
where the trapping instruction actually is. An example is better than a
thousand words:
Naoki Hayama [Tue, 13 Oct 2020 23:48:11 +0000 (16:48 -0700)]
scripts/spelling.txt: add "arbitrary" typo
Add "abitrary||arbitrary".
Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/6bf6520d-787d-5749-09b5-ff92185f501f@lineo.co.jp Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Wang Qing <wangqing@vivo.com> Cc: Xiong <xndchn@gmail.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Jonathan Neuschfer <j.neuschaefer@gmx.net> Cc: Luca Ceresoli <luca@lucaceresoli.net> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/1601085397-27586-1-git-send-email-wangqing@vivo.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lukas Bulwahn [Tue, 13 Oct 2020 23:48:05 +0000 (16:48 -0700)]
kbuild: doc: describe proper script invocation
During an investigation to fix up the execute bits of scripts in the
kernel repository, Andrew Morton and Kees Cook pointed out that the
execute bit should not matter, and that build scripts cannot rely on that.
Kees could not point to any documentation, though.
Masahiro Yamada explained the convention of setting execute bits to make
it easier for manual script invocation.
Provide some basic documentation how the build shall invoke scripts, such
that the execute bits do not matter, and acknowledge that execute bits are
useful nonetheless.
This serves as reference for further clean-up patches in the future.
Nick Desaulniers [Tue, 13 Oct 2020 23:48:01 +0000 (16:48 -0700)]
export.h: fix section name for CONFIG_TRIM_UNUSED_KSYMS for Clang
When enabling CONFIG_TRIM_UNUSED_KSYMS, the linker will warn about the
orphan sections:
(".discard.ksym") is being placed in '".discard.ksym"'
repeatedly when linking vmlinux. This is because the stringification
operator, `#`, in the preprocessor escapes strings. GCC and Clang differ
in how they treat section names that contain \".
The portable solution is to not use a string literal with the preprocessor
stringification operator.
Nick Desaulniers [Tue, 13 Oct 2020 23:47:58 +0000 (16:47 -0700)]
compiler.h: avoid escaped section names
The stringification operator, `#`, in the preprocessor escapes strings.
For example, `# "foo"` becomes `"\"foo\""`. GCC and Clang differ in how
they treat section names that contain \".
The portable solution is to not use a string literal with the preprocessor
stringification operator.
In this case, since __section unconditionally uses the stringification
operator, we actually want the more verbose
__attribute__((__section__())).
Fixes: commit 01447f1880b2 ("Compiler Attributes: remove uses of __attribute__ from compiler.h") Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Link: https://bugs.llvm.org/show_bug.cgi?id=42950 Link: https://lkml.kernel.org/r/20200929194318.548707-1-ndesaulniers@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Tue, 13 Oct 2020 23:47:55 +0000 (16:47 -0700)]
compiler-gcc: improve version error
As Kees suggests, doing so provides developers with two useful pieces of
information:
- The kernel build was attempting to use GCC.
(Maybe they accidentally poked the wrong configs in a CI.)
- They need 4.9 or better.
("Upgrade to what version?" doesn't need to be dug out of documentation,
headers, etc.)
Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Fangrui Song <maskray@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200902225911.209899-8-ndesaulniers@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Desaulniers [Tue, 13 Oct 2020 23:47:33 +0000 (16:47 -0700)]
compiler-clang: add build check for clang 10.0.1
Patch series "set clang minimum version to 10.0.1", v3.
Adds a compile time #error to compiler-clang.h setting the effective
minimum supported version to clang 10.0.1. A separate patch has already
been picked up into the Documentation/ tree also confirming the version.
Next are a series of reverts. One for 32b arm is a partial revert.
Then Marco suggested fixes to KASAN docs.
Finally, improve the warning for GCC too as per Kees.
This patch (of 7):
During Plumbers 2020, we voted to just support the latest release of Clang
for now. Add a compile time check for this.
We plan to remove workarounds for older versions now, which will break in
subtle and not so subtle ways.
Linus Torvalds [Tue, 13 Oct 2020 20:36:07 +0000 (13:36 -0700)]
Merge tag 'x86_asm_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Borislav Petkov:
"Two asm wrapper fixes:
- Use XORL instead of XORQ to avoid a REX prefix and save some bytes
in the .fixup section, by Uros Bizjak.
- Replace __force_order dummy variable with a memory clobber to fix
LLVM requiring a definition for former and to prevent memory
accesses from still being cached/reordered, by Arvind Sankar"
* tag 'x86_asm_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Replace __force_order with a memory clobber
x86/uaccess: Use XORL %0,%0 in __get_user_asm()
Linus Torvalds [Tue, 13 Oct 2020 20:04:41 +0000 (13:04 -0700)]
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
Linus Torvalds [Tue, 13 Oct 2020 19:50:48 +0000 (12:50 -0700)]
Merge tag 'libata-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull libata updates from Jens Axboe:
"Nothing major in here, just fixes or improvements collected over the
last few months"
* tag 'libata-5.10-2020-10-12' of git://git.kernel.dk/linux-block:
ata: ahci: mvebu: Make SATA PHY optional for Armada 3720
MAINTAINERS: remove LIBATA PATA DRIVERS entry
pata_cmd64x: Use fallthrough pseudo-keyword
ahci: qoriq: enable acpi support in qoriq ahci driver
sata, highbank: simplify the return expression of ahci_highbank_suspend
ahci: Add Intel Rocket Lake PCH-H RAID PCI IDs
Linus Torvalds [Tue, 13 Oct 2020 19:36:21 +0000 (12:36 -0700)]
Merge tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Add blkcg accounting for io-wq offload (Dennis)
- A use-after-free fix for io-wq (Hillf)
- Cancelation fixes and improvements
- Use proper files_struct references for offload
- Cleanup of io_uring_get_socket() since that can now go into our own
header
- SQPOLL fixes and cleanups, and support for sharing the thread
- Improvement to how page accounting is done for registered buffers and
huge pages, accounting the real pinned state
- Series cleaning up the xarray code (Willy)
- Various cleanups, refactoring, and improvements (Pavel)
- Use raw spinlock for io-wq (Sebastian)
- Add support for ring restrictions (Stefano)
* tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits)
io_uring: keep a pointer ref_node in file_data
io_uring: refactor *files_register()'s error paths
io_uring: clean file_data access in files_register
io_uring: don't delay io_init_req() error check
io_uring: clean leftovers after splitting issue
io_uring: remove timeout.list after hrtimer cancel
io_uring: use a separate struct for timeout_remove
io_uring: improve submit_state.ios_left accounting
io_uring: simplify io_file_get()
io_uring: kill extra check in fixed io_file_get()
io_uring: clean up ->files grabbing
io_uring: don't io_prep_async_work() linked reqs
io_uring: Convert advanced XArray uses to the normal API
io_uring: Fix XArray usage in io_uring_add_task_file
io_uring: Fix use of XArray in __io_uring_files_cancel
io_uring: fix break condition for __io_uring_register() waiting
io_uring: no need to call xa_destroy() on empty xarray
io_uring: batch account ->req_issue and task struct references
io_uring: kill callback_head argument for io_req_task_work_add()
io_uring: move req preps out of io_issue_sqe()
...
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
projects / kernel.git / log