Florian Westphal [Thu, 18 Aug 2022 22:42:31 +0000 (00:42 +0200)]
netfilter: conntrack: work around exceeded receive window
When a TCP sends more bytes than allowed by the receive window, all future
packets can be marked as invalid.
This can clog up the conntrack table because of 5-day default timeout.
... all trigger 'ACK is over bound' test and we end up with
non-early-evictable 5-day default timeout.
NB: This patch triggers a bunch of checkpatch warnings because of silly
indent. I will resend the cleanup series linked below to reduce the
indent level once this change has propagated to net-next.
I could route the cleanup via nf but that causes extra backport work for
stable maintainers.
Florian Westphal [Sat, 20 Aug 2022 15:38:37 +0000 (17:38 +0200)]
netfilter: ebtables: reject blobs that don't provide all entry points
Harshit Mogalapalli says:
In ebt_do_table() function dereferencing 'private->hook_entry[hook]'
can lead to NULL pointer dereference. [..] Kernel panic:
For some reason ebtables rejects blobs that provide entry points that are
not supported by the table, but what it should instead reject is the
opposite: blobs that DO NOT provide an entry point supported by the table.
t->valid_hooks is the bitmask of hooks (input, forward ...) that will see
packets. Providing an entry point that is not support is harmless
(never called/used), but the inverse isn't: it results in a crash
because the ebtables traverser doesn't expect a NULL blob for a location
its receiving packets for.
Instead of fixing all the individual checks, do what iptables is doing and
reject all blobs that differ from the expected hooks.
Vladimir Oltean [Fri, 19 Aug 2022 17:39:25 +0000 (20:39 +0300)]
net: dsa: don't dereference NULL extack in dsa_slave_changeupper()
When a driver returns -EOPNOTSUPP in dsa_port_bridge_join() but failed
to provide a reason for it, DSA attempts to set the extack to say that
software fallback will kick in.
The problem is, when we use brctl and the legacy bridge ioctls, the
extack will be NULL, and DSA dereferences it in the process of setting
it.
Sergei Antonov proves this using the following stack trace:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at dsa_slave_changeupper+0x5c/0x158
dsa_slave_changeupper from raw_notifier_call_chain+0x38/0x6c
raw_notifier_call_chain from __netdev_upper_dev_link+0x198/0x3b4
__netdev_upper_dev_link from netdev_master_upper_dev_link+0x50/0x78
netdev_master_upper_dev_link from br_add_if+0x430/0x7f4
br_add_if from br_ioctl_stub+0x170/0x530
br_ioctl_stub from br_ioctl_call+0x54/0x7c
br_ioctl_call from dev_ifsioc+0x4e0/0x6bc
dev_ifsioc from dev_ioctl+0x2f8/0x758
dev_ioctl from sock_ioctl+0x5f0/0x674
sock_ioctl from sys_ioctl+0x518/0xe40
sys_ioctl from ret_fast_syscall+0x0/0x1c
Fix the problem by only overriding the extack if non-NULL.
====================
bonding: 802.3ad: fix no transmission of LACPDUs
Configuring a bond in a specific order can leave the bond in a state
where it never transmits LACPDUs.
The first patch adds some kselftest infrastructure and the reproducer
that demonstrates the problem. The second patch fixes the issue. The
new third patch makes ad_ticks_per_sec a static const and removes the
passing of this variable via the stack.
====================
Jonathan Toppins [Fri, 19 Aug 2022 15:15:14 +0000 (11:15 -0400)]
bonding: 3ad: make ad_ticks_per_sec a const
The value is only ever set once in bond_3ad_initialize and only ever
read otherwise. There seems to be no reason to set the variable via
bond_3ad_initialize when setting the global variable will do. Change
ad_ticks_per_sec to a const to enforce its read-only usage.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Toppins [Fri, 19 Aug 2022 15:15:13 +0000 (11:15 -0400)]
bonding: 802.3ad: fix no transmission of LACPDUs
This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.
To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.
line 44: ip link add fbond type bond mode 4 miimon 200 \
xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
params.ad_actor_system = 0
call stack:
bond_option_ad_actor_sys_prio()
-> bond_3ad_update_ad_actor_settings()
-> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
-> ad.system.sys_mac_addr = bond->dev->dev_addr; because
params.ad_actor_system == 0
results:
ad.system.sys_mac_addr = bond->dev->dev_addr
line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
bond->dev->dev_addr = new_mac
line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
params.ad_actor_system = 0
call stack:
bond_option_ad_actor_sys_prio()
-> bond_3ad_update_ad_actor_settings()
-> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
-> ad.system.sys_mac_addr = bond->dev->dev_addr; because
params.ad_actor_system == 0
results:
ad.system.sys_mac_addr = bond->dev->dev_addr
line 60: ip link set veth1-bond down master fbond
given:
params.ad_actor_system = 0
params.mode = BOND_MODE_8023AD
ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
bond_enslave
-> bond_3ad_initialize(); because first slave
-> if ad.system.sys_mac_addr != bond->dev->dev_addr
return
results:
Nothing is run in bond_3ad_initialize() because dev_addr equals
sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
never initialized anywhere else.
The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 665d31030100 ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.
Fixes: 665d31030100 ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jonathan Toppins [Fri, 19 Aug 2022 15:15:12 +0000 (11:15 -0400)]
selftests: include bonding tests into the kselftest infra
This creates a test collection in drivers/net/bonding for bonding
specific kernel selftests.
The first test is a reproducer that provisions a bond and given the
specific order in how the ip-link(8) commands are issued the bond never
transmits an LACPDU frame on any of its slaves.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sergei Antonov [Fri, 19 Aug 2022 11:05:19 +0000 (14:05 +0300)]
net: moxa: get rid of asymmetry in DMA mapping/unmapping
Since priv->rx_mapping[i] is maped in moxart_mac_open(), we
should unmap it from moxart_mac_stop(). Fixes 2 warnings.
1. During error unwinding in moxart_mac_probe(): "goto init_fail;",
then moxart_mac_free_memory() calls dma_unmap_single() with
priv->rx_mapping[i] pointers zeroed.
WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980
DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes]
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0xbc/0x1f0
__warn from warn_slowpath_fmt+0x94/0xc8
warn_slowpath_fmt from check_unmap+0x704/0x980
check_unmap from debug_dma_unmap_page+0x8c/0x9c
debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8
moxart_mac_free_memory from moxart_mac_probe+0x190/0x218
moxart_mac_probe from platform_probe+0x48/0x88
platform_probe from really_probe+0xc0/0x2e4
2. After commands:
ip link set dev eth0 down
ip link set dev eth0 up
WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec
DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported
CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0xbc/0x1f0
__warn from warn_slowpath_fmt+0x94/0xc8
warn_slowpath_fmt from add_dma_entry+0x204/0x2ec
add_dma_entry from dma_map_page_attrs+0x110/0x328
dma_map_page_attrs from moxart_mac_open+0x134/0x320
moxart_mac_open from __dev_open+0x11c/0x1ec
__dev_open from __dev_change_flags+0x194/0x22c
__dev_change_flags from dev_change_flags+0x14/0x44
dev_change_flags from devinet_ioctl+0x6d4/0x93c
devinet_ioctl from inet_ioctl+0x1ac/0x25c
v1 -> v2:
Extraneous change removed.
Fixes: 6a3c6da34e8d ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiaolei Wang [Fri, 19 Aug 2022 08:24:51 +0000 (16:24 +0800)]
net: phy: Don't WARN for PHY_READY state in mdio_bus_phy_resume()
For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.
Fixes: 9c06e0bd91d7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Thu, 18 Aug 2022 13:42:05 +0000 (08:42 -0500)]
net: ipa: don't assume SMEM is page-aligned
In ipa_smem_init(), a Qualcomm SMEM region is allocated (if needed)
and then its virtual address is fetched using qcom_smem_get(). The
physical address associated with that region is also fetched.
The physical address is adjusted so that it is page-aligned, and an
attempt is made to update the size of the region to compensate for
any non-zero adjustment.
But that adjustment isn't done properly. The physical address is
aligned twice, and as a result the size is never actually adjusted.
Fix this by *not* aligning the "addr" local variable, and instead
making the "phys" local variable be the adjusted "addr" value.
(which is IMO the recommended approach, as it is the clearest
description)
but it is also possible to leave the specification as just:
port@0 {
reg = <0>;
}
and if the driver implements ds->ops->phy_read and ds->ops->phy_write,
the DSA framework "knows" it should create a ds->slave_mii_bus, and it
should connect to a non-OF-based internal PHY on this MDIO bus, at an
MDIO address equal to the port address.
There is also an intermediary way of describing things:
In case 2, DSA calls phylink_connect_phy() and in case 3, it calls
phylink_of_phy_connect(). In both cases, phylink_create() has been
called with a phy_interface_t of PHY_INTERFACE_MODE_NA, and in both
cases, PHY_INTERFACE_MODE_NA is translated into phy->interface.
It is important to note that phy_device_create() initializes
dev->interface = PHY_INTERFACE_MODE_GMII, and so, when we use
phylink_create(PHY_INTERFACE_MODE_NA), no one will override this, and we
will end up with a PHY_INTERFACE_MODE_GMII interface inherited from the
PHY.
All this means that in order to maintain compatibility with device tree
blobs where the phy-mode property is missing, we need to allow the
"gmii" phy-mode and treat it as "internal".
Duoming Zhou [Thu, 18 Aug 2022 09:06:21 +0000 (17:06 +0800)]
nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout
When the pn532 uart device is detaching, the pn532_uart_remove()
is called. But there are no functions in pn532_uart_remove() that
could delete the cmd_timeout timer, which will cause use-after-free
bugs. The process is shown below:
This patch adds del_timer_sync() in pn532_uart_remove() in order to
prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc()
is well synchronized, it sets nfc_dev->shutting_down to true and there
are no syscalls could restart the cmd_timeout timer.
Fixes: 28f683dec7aa ("nfc: pn533: add UART phy driver") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Thu, 18 Aug 2022 08:06:20 +0000 (16:06 +0800)]
r8152: fix the RX FIFO settings when suspending
The RX FIFO would be changed when suspending, so the related settings
have to be modified, too. Otherwise, the flow control would work
abnormally.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216333 Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net> Fixes: 2053ece3ffe2 ("r8152: fix a WOL issue") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Thu, 18 Aug 2022 08:06:19 +0000 (16:06 +0800)]
r8152: fix the units of some registers for RTL8156A
The units of PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY are 16 bytes.
Fixes: 20d6936ad320 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bernard Pidoux [Thu, 18 Aug 2022 00:02:13 +0000 (02:02 +0200)]
rose: check NULL rose_loopback_neigh->loopback
Commit 89efbf0a3c77cded83ce474ab7b91d9370e4758c added NULL check for
`rose_loopback_neigh->dev` in rose_loopback_timer() but omitted to
check rose_loopback_neigh->loopback.
It thus prevents *all* rose connect.
The reason is that a special rose_neigh loopback has a NULL device.
/proc/net/rose_neigh displays special rose_loopback_neigh->loopback as
callsign RSLOOP-0:
addr callsign dev count use mode restart t0 tf digipeaters
00001 RSLOOP-0 ??? 1 2 DCE yes 0 0
By checking rose_loopback_neigh->loopback, rose_rx_call_request() is called
even in case rose_loopback_neigh->dev is NULL. This repairs rose connections.
Verification with rose client application FPAC:
FPAC-Node v 4.1.3 (built Aug 5 2022) for LINUX (help = h)
F6BVP-4 (Commands = ?) : u
Users - AX.25 Level 2 sessions :
Port Callsign Callsign AX.25 state ROSE state NetRom status
axudp F6BVP-5 -> F6BVP-9 Connected Connected ---------
Fixes: 89efbf0a3c77 ("rose: Fix Null pointer dereference in rose_send_frame()") Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Suggested-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Thomas DL9SAU Osterried <thomas@osterried.de> Signed-off-by: David S. Miller <davem@davemloft.net>
SCI should be updated, because it contains MAC in its first 6
octets.
That's not entirely correct. The SCI can be based on the MAC address,
but doesn't have to be. We can also use any 64-bit number as the
SCI. When the SCI based on the MAC address, it uses a 16-bit "port
number" provided by userspace, which commit ed3cb35c7ab1 overwrites
with 1.
In addition, changing the SCI after macsec has been setup can just
confuse the receiver. If we configure the RXSC on the peer based on
the original SCI, we should keep the same SCI on TX.
When the macsec device is being managed by a userspace key negotiation
daemon such as wpa_supplicant, commit ed3cb35c7ab1 would also
overwrite the SCI defined by userspace.
Sean Anderson [Thu, 18 Aug 2022 16:40:29 +0000 (12:40 -0400)]
net: dpaa: Fix <1G ethernet on LS1046ARDB
As discussed in commit 74337d8e8de6 ("dpaa_eth: support all modes with
rate adapting PHYs"), we must add a workaround for Aquantia phys with
in-tree support in order to keep 1G support working. Update this
workaround for the AQR113C phy found on revision C LS1046ARDB boards.
Fixes: 72bda41f5a00 ("net: phy: Add support for AQR113C EPHY") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220818164029.2063293-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- net: fix suspicious RCU usage in bpf_sk_reuseport_detach()
Current release - new code bugs:
- mlxsw: ptp: fix a couple of races, static checker warnings and
error handling
Previous releases - regressions:
- netfilter:
- nf_tables: fix possible module reference underflow in error path
- make conntrack helpers deal with BIG TCP (skbs > 64kB)
- nfnetlink: re-enable conntrack expectation events
- net: fix potential refcount leak in ndisc_router_discovery()
Previous releases - always broken:
- sched: cls_route: disallow handle of 0
- neigh: fix possible local DoS due to net iface start/stop loop
- rtnetlink: fix module refcount leak in rtnetlink_rcv_msg
- sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu
- virtio_net: fix endian-ness for RSS
- dsa: mv88e6060: prevent crash on an unused port
- fec: fix timer capture timing in `fec_ptp_enable_pps()`
- ocelot: stats: fix races, integer wrapping and reading incorrect
registers (the change of register definitions here accounts for
bulk of the changed LoC in this PR)"
* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: moxa: MAC address reading, generating, validity checking
tcp: handle pure FIN case correctly
tcp: refactor tcp_read_skb() a bit
tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
tcp: fix sock skb accounting in tcp_read_skb()
igb: Add lock to avoid data race
dt-bindings: Fix incorrect "the the" corrections
net: genl: fix error path memory leak in policy dumping
stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
net/mlx5e: Allocate flow steering storage during uplink initialization
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
net: mscc: ocelot: turn stats_lock into a spinlock
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
...
Linus Torvalds [Fri, 19 Aug 2022 02:24:57 +0000 (19:24 -0700)]
Merge tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
- fix landlock test build regression
* tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/landlock: fix broken include of linux/landlock.h
Linus Torvalds [Fri, 19 Aug 2022 02:18:28 +0000 (19:18 -0700)]
Merge tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull rtla tool fixes from Steven Rostedt:
"Fixes for the Real-Time Linux Analysis tooling:
- Fix tracer name in comments and prints
- Fix setting up symlinks
- Allow extra flags to be set in build
- Consolidate and show all necessary libraries not found in build
error"
* tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla: Consolidate and show all necessary libraries that failed for building
tools/rtla: Build with EXTRA_{C,LD}FLAGS
tools/rtla: Fix command symlinks
rtla: Fix tracer name
Sergei Antonov [Thu, 18 Aug 2022 09:23:17 +0000 (12:23 +0300)]
net: moxa: MAC address reading, generating, validity checking
This device does not remember its MAC address, so add a possibility
to get it from the platform. If it fails, generate a random address.
This will provide a MAC address early during boot without user space
being involved.
Also remove extra calls to is_valid_ether_addr().
Made after suggestions by Andrew Lunn:
1) Use eth_hw_addr_random() to assign a random MAC address during probe.
2) Remove is_valid_ether_addr() from moxart_mac_open()
3) Add a call to platform_get_ethdev_address() during probe
4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this
v1 -> v2:
Handle EPROBE_DEFER returned from platform_get_ethdev_address().
Move MAC reading code to the beginning of the probe function.
Signed-off-by: Sergei Antonov <saproj@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> CC: Yang Yingliang <yangyingliang@huawei.com> CC: Pavel Skripkin <paskripkin@gmail.com> CC: Guobin Huang <huangguobin4@huawei.com> CC: Yang Wei <yang.wei9@zte.com.cn> CC: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
tcp: some bug fixes for tcp_read_skb()
This patchset contains 3 bug fixes and 1 minor refactor patch for
tcp_read_skb(). V1 only had the first patch, as Eric prefers to fix all
of them together, I have to group them together.
====================
Cong Wang [Wed, 17 Aug 2022 19:54:45 +0000 (12:54 -0700)]
tcp: handle pure FIN case correctly
When skb->len==0, the recv_actor() returns 0 too, but we also use 0
for error conditions. This patch amends this by propagating the errors
to tcp_read_skb() so that we can distinguish skb->len==0 case from
error cases.
Fixes: 4977de2e4917 ("tcp: Introduce tcp_read_skb()") Reported-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang [Wed, 17 Aug 2022 19:54:44 +0000 (12:54 -0700)]
tcp: refactor tcp_read_skb() a bit
As tcp_read_skb() only reads one skb at a time, the while loop is
unnecessary, we can turn it into an if. This also simplifies the
code logic.
Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang [Wed, 17 Aug 2022 19:54:43 +0000 (12:54 -0700)]
tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it
assumes the skb is not yet dequeued. This is no longer true for
tcp_read_skb() case where we dequeue the skb first.
Fix this by introducing a helper __tcp_cleanup_rbuf() which does
not require any skb and calling it in tcp_read_skb().
Fixes: 4977de2e4917 ("tcp: Introduce tcp_read_skb()") Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang [Wed, 17 Aug 2022 19:54:42 +0000 (12:54 -0700)]
tcp: fix sock skb accounting in tcp_read_skb()
Before commit dd3111be4a6a ("net: Introduce a new proto_ops
->read_skb()"), skb was not dequeued from receive queue hence
when we close TCP socket skb can be just flushed synchronously.
After this commit, we have to uncharge skb immediately after being
dequeued, otherwise it is still charged in the original sock. And we
still need to retain skb->sk, as eBPF programs may extract sock
information from skb->sk. Therefore, we have to call
skb_set_owner_sk_safe() here.
Fixes: dd3111be4a6a ("net: Introduce a new proto_ops ->read_skb()") Reported-and-tested-by: syzbot+a0e6f8738b58f7654417@syzkaller.appspotmail.com Tested-by: Stanislav Fomichev <sdf@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lin Ma [Wed, 17 Aug 2022 18:49:21 +0000 (11:49 -0700)]
igb: Add lock to avoid data race
The commit 757c8e9a3e21 ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.
However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.
To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 7579803768fc ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit fb361bc911ba
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")
Fixes: 757c8e9a3e21 ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 18 Aug 2022 18:02:11 +0000 (11:02 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-17 (ice)
This series contains updates to ice driver only.
Grzegorz prevents modifications to VLAN 0 when setting VLAN promiscuous
as it will already be set. He also ignores -EEXIST error when attempting
to set promiscuous and ensures promiscuous mode is properly cleared from
the hardware when being removed.
Benjamin ignores additional -EEXIST errors when setting promiscuous mode
since the existing mode is the desired mode.
Sylwester fixes VFs to allow sending of tagged traffic when no VLAN filters
exist.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix VF not able to send tagged traffic with no VLAN filters
ice: Ignore error message when setting same promiscuous mode
ice: Fix clearing of promisc mode with bridge over bond
ice: Ignore EEXIST when setting promisc mode
ice: Fix double VLAN error when entering promisc mode
====================
Jakub Kicinski [Tue, 16 Aug 2022 16:19:39 +0000 (09:19 -0700)]
net: genl: fix error path memory leak in policy dumping
If construction of the array of policies fails when recording
non-first policy we need to unwind.
netlink_policy_dump_add_policy() itself also needs fixing as
it currently gives up on error without recording the allocated
pointer in the pstate pointer.
Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com Fixes: 64a54c9a8e3a ("genetlink: properly support per-op policy dumping") Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
Commit 49a4d81c0927 ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()
This was partly revert by commit b2f339faba69 ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
While unloading the dwmac-intel driver, clk_disable_unprepare() is
being called twice in stmmac_dvr_remove() and
intel_eth_pci_remove(). This causes kernel panic on the second call.
"
However later on, commit 65c2abbd92584 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.
So this call should now be called from intel_eth_pci_remove().
Jens Wiklander [Thu, 18 Aug 2022 11:08:59 +0000 (13:08 +0200)]
tee: add overflow check in register_shm_helper()
With special lengths supplied by user space, register_shm_helper() has
an integer overflow when calculating the number of pages covered by a
supplied user space memory region.
This causes internal_get_user_pages_fast() a helper function of
pin_user_pages_fast() to do a NULL pointer dereference:
Leon Romanovsky [Tue, 16 Aug 2022 08:47:23 +0000 (11:47 +0300)]
net/mlx5e: Allocate flow steering storage during uplink initialization
IPsec code relies on valid priv->fs pointer that is the case in NIC
flow, but not correct in uplink. Before commit that mentioned in the
Fixes line, that pointer was valid in all flows as it was allocated
together with priv struct.
In addition, the cleanup representors routine called to that
not-initialized priv->fs pointer and its internals which caused NULL
deference.
So, move FS allocation to be as early as possible.
Jakub Kicinski [Thu, 18 Aug 2022 04:58:48 +0000 (21:58 -0700)]
Merge branch 'fixes-for-ocelot-driver-statistics'
Vladimir Oltean says:
====================
Fixes for Ocelot driver statistics
This series contains bug fixes for the ocelot drivers (both switchdev
and DSA). Some concern the counters exposed to ethtool -S, and others to
the counters exposed to ifconfig. I'm aware that the changes are fairly
large, but I wanted to prioritize on a proper approach to addressing the
issues rather than a quick hack.
Some of the noticed problems:
- bad register offsets for some counters
- unhandled concurrency leading to corrupted counters
- unhandled 32-bit wraparound of ifconfig counters
The issues on the ocelot switchdev driver were noticed through code
inspection, I do not have the hardware to test.
This patch set necessarily converts ocelot->stats_lock from a mutex to a
spinlock. I know this affects Colin Foster's development with the SPI
controlled VSC7512. I have other changes prepared for net-next that
convert this back into a mutex (along with other changes in this area).
====================
Vladimir Oltean [Tue, 16 Aug 2022 13:53:52 +0000 (16:53 +0300)]
net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().
It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.
There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.
Fixes: 99c1e05296dd ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:51 +0000 (16:53 +0300)]
net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).
The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:50 +0000 (16:53 +0300)]
net: mscc: ocelot: make struct ocelot_stat_layout array indexable
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.
Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.
The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.
To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.
This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:49 +0000 (16:53 +0300)]
net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit da9c30d74b40 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.
Fixes: 99c1e05296dd ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:48 +0000 (16:53 +0300)]
net: mscc: ocelot: turn stats_lock into a spinlock
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 13:53:47 +0000 (16:53 +0300)]
net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
This register, used as part of stats->tx_dropped in
ocelot_get_stats64(), has a wrong address. At the address currently
given, there is actually the c_tx_green_prio_6 counter.
Fixes: 99c1e05296dd ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.
Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets
=> nobody tracks the packets from the real 1527-max bucket
Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.
Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.
Fixes: 8937dbf2efff ("net: dsa: felix: introduce support for Seville VSC9953 switch") Fixes: 620a56f56947 ("net: dsa: ocelot: add driver for Felix switch family") Fixes: 99c1e05296dd ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.
Fixes: 620a56f56947 ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Tue, 16 Aug 2022 20:14:45 +0000 (23:14 +0300)]
net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.
The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.
Fixes: 731ad5ceba59 ("net: dsa: change scope of STP state setter") Reported-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Sergei Antonov <saproj@gmail.com> Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
netfilter: conntrack and nf_tables bug fixes
The following patchset contains netfilter fixes for net.
Broken since 5.19:
A few ancient connection tracking helpers assume TCP packets cannot
exceed 64kb in size, but this isn't the case anymore with 5.19 when
BIG TCP got merged, from myself.
Regressions since 5.19:
1. 'conntrack -E expect' won't display anything because nfnetlink failed
to enable events for expectations, only for normal conntrack events.
2. partially revert change that added resched calls to a function that can
be in atomic context. Both broken and fixed up by myself.
Broken for several releases (up to original merge of nf_tables):
Several fixes for nf_tables control plane, from Pablo.
This fixes up resource leaks in error paths and adds more sanity
checks for mutually exclusive attributes/flags.
Kconfig:
NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided
via ctnetlink, so it should not default to y. From Geert Uytterhoeven.
Selftests:
rework nft_flowtable.sh: it frequently indicated failure; the way it
tried to detect an offload failure did not work reliably.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
testing: selftests: nft_flowtable.sh: use random netns names
netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END
netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: really skip inactive sets when allocating name
netfilter: nfnetlink: re-enable conntrack expectation events
netfilter: nf_tables: fix scheduling-while-atomic splat
netfilter: nf_ct_irc: cap packet search space to 4k
netfilter: nf_ct_ftp: prefer skb_linearize
netfilter: nf_ct_h323: cap packet size at 64k
netfilter: nf_ct_sane: remove pseudo skb linearization
netfilter: nf_tables: possible module reference underflow in error path
netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag
netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access
====================
David Howells [Tue, 16 Aug 2022 09:34:40 +0000 (10:34 +0100)]
net: Fix suspicious RCU usage in bpf_sk_reuseport_detach()
bpf_sk_reuseport_detach() calls __rcu_dereference_sk_user_data_with_flags()
to obtain the value of sk->sk_user_data, but that function is only usable
if the RCU read lock is held, and neither that function nor any of its
callers hold it.
Fix this by adding a new helper, __locked_read_sk_user_data_with_flags()
that checks to see if sk->sk_callback_lock() is held and use that here
instead.
Alternatively, making __rcu_dereference_sk_user_data_with_flags() use
rcu_dereference_checked() might suffice.
Without this, the following warning can be occasionally observed:
* tag 'ntfs3_for_6.0' of https://github.com/Paragon-Software-Group/linux-ntfs3: (39 commits)
fs/ntfs3: uninitialized variable in ntfs_set_acl_ex()
fs/ntfs3: Remove unused function wnd_bits
fs/ntfs3: Make ni_ins_new_attr return error
fs/ntfs3: Create MFT zone only if length is large enough
fs/ntfs3: Refactoring attr_insert_range to restore after errors
fs/ntfs3: Refactoring attr_punch_hole to restore after errors
fs/ntfs3: Refactoring attr_set_size to restore after errors
fs/ntfs3: New function ntfs_bad_inode
fs/ntfs3: Make MFT zone less fragmented
fs/ntfs3: Check possible errors in run_pack in advance
fs/ntfs3: Added comments to frecord functions
fs/ntfs3: Fill duplicate info in ni_add_name
fs/ntfs3: Make static function attr_load_runs
fs/ntfs3: Add new argument is_mft to ntfs_mark_rec_free
fs/ntfs3: Remove unused mi_mark_free
fs/ntfs3: Fix very fragmented case in attr_punch_hole
fs/ntfs3: Fix work with fragmented xattr
fs/ntfs3: Make ntfs_fallocate return -ENOSPC instead of -EFBIG
fs/ntfs3: extend ni_insert_nonresident to return inserted ATTR_LIST_ENTRY
fs/ntfs3: Check reserved size for maximum allowed
...
Linus Torvalds [Thu, 11 Aug 2022 22:29:46 +0000 (15:29 -0700)]
dcache: move the DCACHE_OP_COMPARE case out of the __d_lookup_rcu loop
__d_lookup_rcu() is one of the hottest functions in the kernel on
certain loads, and it is complicated by filesystems that might want to
have their own name compare function.
We can improve code generation by moving the test of DCACHE_OP_COMPARE
outside the loop, which makes the loop itself much simpler, at the cost
of some code duplication. But both cases end up being simpler, and the
"native" direct case-sensitive compare particularly so.
Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arun Ramadoss [Tue, 16 Aug 2022 10:55:16 +0000 (16:25 +0530)]
net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.
Fixes: 93279a8384af ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice: Fix VF not able to send tagged traffic with no VLAN filters
VF was not able to send tagged traffic when it didn't
have any VLAN interfaces and VLAN anti-spoofing was enabled.
Fix this by allowing VFs with no VLAN filters to send tagged
traffic. After VF adds a VLAN interface it will be able to
send tagged traffic matching VLAN filters only.
Testing hints:
1. Spawn VF
2. Send tagged packet from a VF
3. The packet should be sent out and not dropped
4. Add a VLAN interface on VF
5. Send tagged packet on that VLAN interface
6. Packet should be sent out and not dropped
7. Send tagged packet with id different than VLAN interface
8. Packet should be dropped
ice: Ignore error message when setting same promiscuous mode
Commit cf88a325fd92 ("ice: Fix broken IFF_ALLMULTI handling")
introduced new checks when setting/clearing promiscuous mode. But if the
requested promiscuous mode setting already exists, an -EEXIST error
message would be printed. This is incorrect because promiscuous mode is
either on/off and shouldn't print an error when the requested
configuration is already set.
This can happen when removing a bridge with two bonded interfaces and
promiscuous most isn't fully cleared from VLAN VSI in hardware.
Fix this by ignoring cases where requested promiscuous mode exists.
Fixes: cf88a325fd92 ("ice: Fix broken IFF_ALLMULTI handling") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:49 +0000 (15:25 +0200)]
ice: Fix clearing of promisc mode with bridge over bond
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.
[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!
Fixes: 303b2fd2620f ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:48 +0000 (15:25 +0200)]
ice: Ignore EEXIST when setting promisc mode
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes: 6a1be313400b ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:47 +0000 (15:25 +0200)]
ice: Fix double VLAN error when entering promisc mode
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.
This issue was missed in the initial implementation of double VLAN
mode.
Fixes: 6a1be313400b ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 17 Aug 2022 15:58:54 +0000 (08:58 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Most notably this drops the commits that trip up google cloud (turns
out, any legacy device).
Plus a kerneldoc patch"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: kerneldocs fixes and enhancements
virtio: Revert "virtio: find_vqs() add arg sizes"
virtio_vdpa: Revert "virtio_vdpa: support the arg sizes of find_vqs()"
virtio_pci: Revert "virtio_pci: support the arg sizes of find_vqs()"
virtio-mmio: Revert "virtio_mmio: support the arg sizes of find_vqs()"
virtio: Revert "virtio: add helper virtio_find_vqs_ctx_size()"
virtio_net: Revert "virtio_net: set the default max ring size by find_vqs()"
Florian Westphal [Tue, 16 Aug 2022 12:15:22 +0000 (14:15 +0200)]
testing: selftests: nft_flowtable.sh: rework test to detect offload failure
This test fails on current kernel releases because the flotwable path
now calls dst_check from packet path and will then remove the offload.
Test script has two purposes:
1. check that file (random content) can be sent to other netns (and vv)
2. check that the flow is offloaded (rather than handled by classic
forwarding path).
Since dst_check is in place, 2) fails because the nftables ruleset in
router namespace 1 intentionally blocks traffic under the assumption
that packets are not passed via classic path at all.
Rework this: Instead of blocking traffic, create two named counters, one
for original and one for reverse direction.
The first three test cases are handled by classic forwarding path
(path mtu discovery is disabled and packets exceed MTU).
But all other tests enable PMTUD, so the originator and responder are
expected to lower packet size and flowtable is expected to do the packet
forwarding.
For those tests, check that the packet counters (which are only
incremented for packets that are passed up to classic forward path)
are significantly lower than the file size transferred.
I've tested that the counter-checks fail as expected when the 'flow add'
statement is removed from the ruleset.
Jakub Kicinski [Tue, 16 Aug 2022 00:23:58 +0000 (17:23 -0700)]
tls: rx: react to strparser initialization errors
Even though the normal strparser's init function has a return
value we got away with ignoring errors until now, as it only
validates the parameters and we were passing correct parameters.
tls_strp can fail to init on memory allocation errors, which
syzbot duly induced and reported.
Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com Fixes: 37c2526e223d ("tls: rx: do not use the standard strparser") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Tue, 16 Aug 2022 12:15:21 +0000 (14:15 +0200)]
testing: selftests: nft_flowtable.sh: use random netns names
"ns1" is a too generic name, use a random suffix to avoid
errors when such a netns exists. Also allows to run multiple
instances of the script in parallel.
Linus Torvalds [Tue, 16 Aug 2022 18:42:11 +0000 (11:42 -0700)]
Merge tag 'nios2_fixes_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull NIOS2 fixes from Dinh Nguyen:
- Security fixes from Al Viro
* tag 'nios2_fixes_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: add force_successful_syscall_return()
nios2: restarts apply only to the first sigframe we build...
nios2: fix syscall restart checks
nios2: traced syscall does need to check the syscall number
nios2: don't leave NULLs in sys_call_table[]
nios2: page fault et.al. are *not* restartable syscalls...
Linus Torvalds [Tue, 16 Aug 2022 18:40:15 +0000 (11:40 -0700)]
Merge tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes that came in since my pull request, the Meson fix is a
little large since it's fixing all possible cases of the problem that
was observed with the driver and clock API trying to share
configuration by integrating the device clocking fully with the clock
API rather than spot fixing the one instance that was observed"
* tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: Drop Pratyush Yadav
spi: meson-spicc: add local pow2 clock ops to preserve rate between messages
MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE
spi: spi.c: Add missing __percpu annotations in users of spi_statistics
Linus Torvalds [Tue, 16 Aug 2022 18:36:38 +0000 (11:36 -0700)]
Merge tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of small fixes that came in since my pull request, nothing
major here"
* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Fix missing error return from regulator_bulk_get()
regulator: pca9450: Remove restrictions for regulator-name
The exception for the "unaligned access at the end of the page, next
page not mapped" never happens, but the fixup code ends up causing
trouble for compilers to optimize well.
clang in particular ends up seeing it being in the middle of a loop, and
tries desperately to optimize the exception fixup code that is never
really reached.
The simple solution is to just move all the fixups into the exception
handler itself, which moves it all out of the hot case code, and means
that the compiler never sees it or needs to worry about it.
Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hector Martin [Tue, 16 Aug 2022 07:03:11 +0000 (16:03 +0900)]
locking/atomic: Make test_and_*_bit() ordered on failure
These operations are documented as always ordered in
include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
type use cases where one side needs to ensure a flag is left pending
after some shared data was updated rely on this ordering, even in the
failure case.
This is the case with the workqueue code, which currently suffers from a
reproducible ordering violation on Apple M1 platforms (which are
notoriously out-of-order) that ends up causing the TTY layer to fail to
deliver data to userspace properly under the right conditions. This
change fixes that bug.
Change the documentation to restrict the "no order on failure" story to
the _lock() variant (for which it makes sense), and remove the
early-exit from the generic implementation, which is what causes the
missing barrier semantics in that case. Without this, the remaining
atomic op is fully ordered (including on ARM64 LSE, as of recent
versions of the architecture spec).
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 381521bdfc48 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs") Fixes: ac7c8d70ae71 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()") Signed-off-by: Hector Martin <marcan@marcan.st> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alan Brady [Tue, 2 Aug 2022 08:19:17 +0000 (10:19 +0200)]
i40e: Fix to stop tx_timeout recovery if GLOBR fails
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 79a154c5e3e8 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Fix tunnel checksum offload with fragmented traffic
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: 5c808411f3bd ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It might not be hard to fix if we want to: maybe just rename size to
size_hint and make sure legacy transports ignore the hint.
But it's not sure what the benefit is in any case, so let's drop it.
Fixes: ecdab48b5444 ("virtio_vdpa: support the arg sizes of find_vqs()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-6-mst@redhat.com>
virtio_pci: Revert "virtio_pci: support the arg sizes of find_vqs()"
This reverts commit 934a3baaf96e0bbbccb7fffebeb777f538eed388: the legacy
path is wrong and in fact can not support the proposed API since for a
legacy device we never communicate the vq size to the hypervisor.
Reported-by: Andres Freund <andres@anarazel.de> Fixes: 934a3baaf96e ("virtio_pci: support the arg sizes of find_vqs()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-5-mst@redhat.com>
Fixes: e8eea2a9a7f3 ("virtio_mmio: support the arg sizes of find_vqs()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-4-mst@redhat.com>
This has been reported to trip up guests on GCP (Google Cloud).
The reason is that virtio_find_vqs_ctx_size is broken on legacy
devices. We can in theory fix virtio_find_vqs_ctx_size but
in fact the patch itself has several other issues:
- It treats unknown speed as < 10G
- It leaves userspace no way to find out the ring size set by hypervisor
- It tests speed when link is down
- It ignores the virtio spec advice:
Both \field{speed} and \field{duplex} can change, thus the driver
is expected to re-read these values after receiving a
configuration change notification.
- It is not clear the performance impact has been tested properly
Jakub Kicinski [Tue, 16 Aug 2022 03:14:39 +0000 (20:14 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-12 (iavf)
This series contains updates to iavf driver only.
Przemyslaw frees memory for admin queues in initialization error paths,
prevents freeing of vf_res which is causing null pointer dereference,
and adjusts calls in error path of reset to avoid iavf_close() which
could cause deadlock.
Ivan Vecera avoids deadlock that can occur when driver if part of
failover.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix deadlock in initialization
iavf: Fix reset error handling
iavf: Fix NULL pointer dereference in iavf_get_link_ksettings
iavf: Fix adminq error handling
====================
Zhengchao Shao [Mon, 15 Aug 2022 02:46:29 +0000 (10:46 +0800)]
net: rtnetlink: fix module reference count leak issue in rtnetlink_rcv_msg
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: b295e9674745 ("net: rtnetlink: add bulk delete support flag") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
selftests/landlock: fix broken include of linux/landlock.h
Revert part of the earlier changes to fix the kselftest build when
using a sub-directory from the top of the tree as this broke the
landlock test build as a side-effect when building with "make -C
tools/testing/selftests/landlock".
netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
Since c1894f2477ec ("netfilter: nf_tables: Support for sets with
multiple ranged fields"), it possible to combine intervals and
concatenations. Later on, 6d8a544a31c0 ("netfilter: nf_tables:
reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag
for userspace to report that the set stores a concatenation.
Make sure NFT_SET_CONCAT is set on if field_count is specified for
consistency. Otherwise, if NFT_SET_CONCAT is specified with no
field_count, bail out with EINVAL.
Fixes: 6d8a544a31c0 ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Al Viro [Mon, 8 Aug 2022 15:09:45 +0000 (16:09 +0100)]
nios2: add force_successful_syscall_return()
If we use the ancient SysV syscall ABI, we'd better have tell the
kernel how to claim that a negative return value is a success.
Use ->orig_r2 for that - it's inaccessible via ptrace, so it's
a fair game for changes and it's normally[*] non-negative on return
from syscall. Set to -1; syscall is not going to be restart-worthy
by definition, so we won't interfere with that use either.
[*] the only exception is rt_sigreturn(), where we skip the entire
messing with r1/r2 anyway.
netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the
netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise,
NFTA_SET_ELEM_KEY_END should not be present.
For catch-all element, NFTA_SET_ELEM_KEY_END should not be present.
The NFT_SET_ELEM_INTERVAL_END is never used with this set flags
combination.
David S. Miller [Mon, 15 Aug 2022 10:49:58 +0000 (11:49 +0100)]
Merge branch 'mlxsw-fixes'
Petr Machata says:
====================
mlxsw: Fixes for PTP support
This set fixes several issues in mlxsw PTP code.
- Patch #1 fixes compilation warnings.
- Patch #2 adjusts the order of operation during cleanup, thereby
closing the window after PTP state was already cleaned in the ASIC
for the given port, but before the port is removed, when the user
could still in theory make changes to the configuration.
- Patch #3 protects the PTP configuration with a custom mutex, instead
of relying on RTNL, which is not held in all access paths.
- Patch #4 forbids enablement of PTP only in RX or only in TX. The
driver implicitly assumed this would be the case, but neglected to
sanitize the configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:03 +0000 (17:32 +0200)]
mlxsw: spectrum_ptp: Forbid PTP enablement only in RX or in TX
Currently mlxsw driver configures one global PTP configuration for all
ports. The reason is that the switch behaves like a transparent clock
between CPU port and front-panel ports. When time stamp is enabled in
any port, the hardware is configured to update the correction field. The
fact that the configuration of CPU port affects all the ports, makes the
correction field update to be global for all ports. Otherwise, user will
see odd values in the correction field, as the switch will update the
correction field in the CPU port, but not in all the front-panel ports.
The CPU port is relevant in both RX and TX, so to avoid problematic
configuration, forbid PTP enablement only in one direction, i.e., only in
RX or TX.
Without the change:
$ hwstamp_ctl -i swp1 -r 12 -t 0
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 0
rx_filter 2
$ echo $?
0
With the change:
$ hwstamp_ctl -i swp1 -r 12 -t 0
current settings:
tx_type 1
rx_filter 2
SIOCSHWTSTAMP failed: Invalid argument
Fixes: b7979f48c9b8a ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:02 +0000 (17:32 +0200)]
mlxsw: spectrum_ptp: Protect PTP configuration with a mutex
Currently the functions mlxsw_sp2_ptp_{configure, deconfigure}_port()
assume that they are called when RTNL is locked and they warn otherwise.
The deconfigure function can be called when port is removed, for example
as part of device reload, then there is no locked RTNL and the function
warns [1].
To avoid such case, do not assume that RTNL protects this code, add a
dedicated mutex instead. The mutex protects 'ptp_state->config' which
stores the existing global configuration in hardware. Use this mutex also
to protect the code which configures the hardware. Then, there will be
only one configuration in any time, which will be updated in 'ptp_state'
and a race will be avoided.
Fixes: b7979f48c9b8a ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:01 +0000 (17:32 +0200)]
mlxsw: spectrum: Clear PTP configuration after unregistering the netdevice
Currently as part of removing port, PTP API is called to clear the
existing configuration and set the 'rx_filter' and 'tx_type' to zero.
The clearing is done before unregistering the netdevice, which means that
there is a window of time in which the user can reconfigure PTP in the
port, and this configuration will not be cleared.
Reorder the operations, clear PTP configuration after unregistering the
netdevice.
Fixes: 68ce8dcc48830 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:00 +0000 (17:32 +0200)]
mlxsw: spectrum_ptp: Fix compilation warnings
In case that 'CONFIG_PTP_1588_CLOCK' is not enabled in the config file,
there are implementations for the functions
mlxsw_{sp,sp2}_ptp_txhdr_construct() as part of 'spectrum_ptp.h'. In this
case, they should be defined as 'static' as they are not supposed to be
used out of this file. Make the functions 'static', otherwise the following
warnings are returned:
"warning: no previous prototype for 'mlxsw_sp_ptp_txhdr_construct'"
"warning: no previous prototype for 'mlxsw_sp2_ptp_txhdr_construct'"
In addition, make the functions 'inline' for case that 'spectrum_ptp.h'
will be included anywhere else and the functions would probably not be
used, so compilation warnings about unused static will be returned.
Fixes: 9478f836ad53 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / kernel.git / log