kernel.git
4 years agodrm/i915: Remove requirement for holding i915_request.lock for breadcrumbs
Chris Wilson [Fri, 31 Jul 2020 15:48:31 +0000 (16:48 +0100)]
drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs

Since the breadcrumb enabling/cancelling itself is serialised by the
breadcrumbs.irq_lock, with a bit of care we can remove the outer
serialisation with i915_request.lock for concurrent
dma_fence_enable_signaling(). This has the important side-effect of
eliminating the nested i915_request.lock within request submission.

The challenge in serialisation is around the unsubmission where we take
an active request that wants a breadcrumb on the signaling engine and
put it to sleep. We do not want a concurrent
dma_fence_enable_signaling() to attach a breadcrumb as we unsubmit, so
we must mark the request as no longer active before serialising with the
concurrent enable-signaling.

On retire, we serialise with the concurrent enable-signaling, but
instead of clearing ACTIVE, we mark it as SIGNALED.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731154834.8378-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Rebased and reordered into drm-intel-gt-next branch]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Provide a fastpath for waiting on vma bindings
Chris Wilson [Fri, 31 Jul 2020 08:50:15 +0000 (09:50 +0100)]
drm/i915: Provide a fastpath for waiting on vma bindings

Before we can execute a request, we must wait for all of its vma to be
bound. This is a frequent operation for which we can optimise away a
few atomic operations (notably a cmpxchg) in lieu of the RCU protection.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-7-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Reduce locking around i915_active_acquire_preallocate_barrier()
Chris Wilson [Fri, 31 Jul 2020 08:50:14 +0000 (09:50 +0100)]
drm/i915: Reduce locking around i915_active_acquire_preallocate_barrier()

As the conversion between idle-barrier and full i915_active_fence is
already serialised by explicit memory barriers, we can reduce the
spinlock in i915_active_acquire_preallocate_barrier() for finding an
idle-barrier to reuse to an RCU read lock to ensure the fence remains
valid, only taking the spinlock for the update of the rbtree itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-6-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Make the stale cached active node available for any timeline
Chris Wilson [Fri, 31 Jul 2020 08:50:13 +0000 (09:50 +0100)]
drm/i915: Make the stale cached active node available for any timeline

Rather than require the next timeline after idling to match the MRU
before idling, reset the index on the node and allow it to match the
first request. However, this requires cmpxchg(u64) and so is not trivial
on 32b, so for compatibility we just fallback to keeping the cached node
pointing to the MRU timeline.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-5-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Keep the most recently used active-fence upon discard
Chris Wilson [Fri, 31 Jul 2020 08:50:12 +0000 (09:50 +0100)]
drm/i915: Keep the most recently used active-fence upon discard

Whenever an i915_active idles, we prune its tree of old fence slots to
prevent a gradual leak should it be used to track many, many timelines.
The downside is that we then have to frequently reallocate the rbtree.
A compromise is that we keep the most recently used fence slot, and
reuse that for the next active reference as that is the most likely
timeline to be reused.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-4-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Export a preallocate variant of i915_active_acquire()
Chris Wilson [Fri, 31 Jul 2020 08:50:11 +0000 (09:50 +0100)]
drm/i915: Export a preallocate variant of i915_active_acquire()

Sometimes we have to be very careful not to allocate underneath a mutex
(or spinlock) and yet still want to track activity. Enter
i915_active_acquire_for_context(). This raises the activity counter on
i915_active prior to use and ensures that the fence-tree contains a slot
for the context.

v2: Refactor active_lookup() so it can be called again before/after
locking to resolve contention. Since we protect the rbtree until we
idle, we can do a lockfree lookup, with the caveat that if another
thread performs a concurrent insertion, the rotations from the insert
may cause us to not find our target. A second pass holding the treelock
will find the target if it exists, or the place to perform our
insertion.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-3-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Skip taking acquire mutex for no ref->active callback
Chris Wilson [Fri, 31 Jul 2020 08:50:10 +0000 (09:50 +0100)]
drm/i915: Skip taking acquire mutex for no ref->active callback

If no active callback is defined for i915_active, we do not need to
serialise its enabling with the mutex. We still do only want to call the
debug activate once, and must still serialise with a concurrent retire.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731085015.32368-2-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/selftests: Drop stale timeline constructor assert
Chris Wilson [Fri, 31 Jul 2020 10:22:06 +0000 (11:22 +0100)]
drm/i915/selftests: Drop stale timeline constructor assert

Since we pass around encoded parameters to the kernel context
constructor using the ce->timeline pointer, we can no longer assert that
it should be zero for mock timeline construction.

Fixes: d1bf5dd8f6d5 ("drm/i915/gt: Support multiple pinned timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200731102206.6793-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Updated Fixes: link after rebasing and reordering into drm-intel-gt-next branch]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gt: Pull release of node->age under the spinlock
Chris Wilson [Thu, 30 Jul 2020 13:40:49 +0000 (14:40 +0100)]
drm/i915/gt: Pull release of node->age under the spinlock

We need to ensure that the list is valid prior to marking the node as
retrievable, otherwise we may see two threads compete over the same node
in intel_gt_get_buffer_pool(). If the first thread acquires and releases
the node in the same jiffie, the second thread may then acquire it (as
the jiffie now again matches the expected value) and claim the node
before it is put back into the list.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730134049.8822-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gt: Support multiple pinned timelines
Chris Wilson [Thu, 30 Jul 2020 18:39:06 +0000 (19:39 +0100)]
drm/i915/gt: Support multiple pinned timelines

We may need to allocate more than one pinned context/timeline for each
engine which can utilise the per-engine HWSP, so we need to give each
a different offset within it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730183906.25422-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gem: Delay tracking the GEM context until it is registered
Chris Wilson [Thu, 30 Jul 2020 09:28:56 +0000 (10:28 +0100)]
drm/i915/gem: Delay tracking the GEM context until it is registered

Avoid exposing a partially constructed context by deferring the
list_add() from the initial construction to the end of registration.
Otherwise, if we peek into the list of contexts from inside debugfs, we
may see the partially constructed context and chase down some dangling
incomplete pointers.

Reported-by: CQ Tang <cq.tang@intel.com>
Fixes: 3aa9945a528e ("drm/i915: Separate GEM context construction and registration to userspace")
References: f6e8aa387171 ("drm/i915: Report the number of closed vma held by each context in debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730092856.23615-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gt: Fix termination condition for freeing all buffer objects
Chris Wilson [Wed, 29 Jul 2020 11:07:56 +0000 (12:07 +0100)]
drm/i915/gt: Fix termination condition for freeing all buffer objects

A last minute change, that unfortunately broke CI so badly it declared
SUCCESS, was to refactor the debug free all buffer pool code to reuse
the normal worker, inverted the termination condition so that it instead
of discarding the nodes, they were all declared young enough and
eligible for reuse.

Fixes: 06b73c2d0b65 ("drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729110756.2344-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Joonas: Updating Fixes: link after rebasing and reordering into drm-intel-gt-next]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/selftests: Flush the active barriers before asserting
Chris Wilson [Tue, 28 Jul 2020 15:33:25 +0000 (16:33 +0100)]
drm/i915/selftests: Flush the active barriers before asserting

Before we peek at the barrier status for an assert, first serialise with
its callbacks so that we see a stable value.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728153325.28351-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool
Chris Wilson [Wed, 29 Jul 2020 08:02:45 +0000 (09:02 +0100)]
drm/i915/gt: Delay taking the spinlock for grabbing from the buffer pool

Some very low hanging fruit, but contention on the pool->lock is
noticeable between intel_gt_get_buffer_pool() and pool_retire(), with
the majority of the hold time due to the locked list iteration. If we
make the node itself RCU protected, we can perform the search for an
suitable node just under RCU, reserving taking the lock itself for
claiming the node and manipulating the list.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729080245.8070-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gt: Disable preparser around xcs invalidations on tgl
Chris Wilson [Tue, 28 Jul 2020 15:21:09 +0000 (16:21 +0100)]
drm/i915/gt: Disable preparser around xcs invalidations on tgl

Unlike rcs where we have conclusive evidence from our selftesting that
disabling the preparser before performing the TLB invalidate and
relocations does impact upon the GPU execution, the evidence for the
same requirement on xcs is much more circumstantial. Let's apply the
preparser disable between batches as we invalidate the TLB as a dose of
healthy paranoia, just in case.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/2169
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152110.830-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/gem: Remove disordered per-file request list for throttling
Chris Wilson [Tue, 28 Jul 2020 15:20:10 +0000 (16:20 +0100)]
drm/i915/gem: Remove disordered per-file request list for throttling

I915_GEM_THROTTLE dates back to the time before contexts where there was
just a single engine, and therefore a single timeline and request list
globally. That request list was in execution/retirement order, and so
walking it to find a particular aged request made sense and could be
split per file.

That is no more. We now have many timelines with a file, as many as the
user wants to construct (essentially per-engine, per-context). Each of
those run independently and so make the single list futile. Remove the
disordered list, and iterate over all the timelines to find a request to
wait on in each to satisfy the criteria that the CPU is no more than 20ms
ahead of its oldest request.

It should go without saying that the I915_GEM_THROTTLE ioctl is no
longer used as the primary means of throttling, so it makes sense to push
the complication into the ioctl where it only impacts upon its few
irregular users, rather than the execbuf/retire where everybody has to
pay the cost. Fortunately, the few users do not create vast amount of
contexts, so the loops over contexts/engines should be concise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728152010.30701-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Soften the tasklet flush frequency before waits
Chris Wilson [Wed, 15 Jul 2020 11:50:51 +0000 (12:50 +0100)]
drm/i915: Soften the tasklet flush frequency before waits

We include a tasklet flush before waiting on a request as a precaution
against the HW being lax in event signaling. We now have a precautionary
flush in the engine's heartbeat and so do not need to be quite so
zealous on every request wait. If we focus on the request, the only
tasklet flush that matters is if there is a delay in submitting this
request to HW, so if the request is not ready to be executed, no
advantage in reducing this wait can be gained by running the tasklet.
And there is little point in doing busy work for no result.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715115147.11866-10-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915/selftests: Mock the status_page.vma for the kernel_context
Chris Wilson [Wed, 15 Jul 2020 15:58:58 +0000 (16:58 +0100)]
drm/i915/selftests: Mock the status_page.vma for the kernel_context

Since we assert that the kernel_context is using the perma-pinned HWSP,
make it so.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2179
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715155858.16410-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agodrm/i915: Reduce i915_request.lock contention for i915_request_wait
Chris Wilson [Thu, 16 Jul 2020 10:07:54 +0000 (11:07 +0100)]
drm/i915: Reduce i915_request.lock contention for i915_request_wait

Currently, we use i915_request_completed() directly in
i915_request_wait() and follow up with a manual invocation of
dma_fence_signal(). This appears to cause a large number of contentions
on i915_request.lock as when the process is woken up after the fence is
signaled by an interrupt, we will then try and call dma_fence_signal()
ourselves while the signaler is still holding the lock.
dma_fence_is_signaled() has the benefit of checking the
DMA_FENCE_FLAG_SIGNALED_BIT prior to calling dma_fence_signal() and so
avoids most of that contention.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716100754.5670-1-chris@chris-wilson.co.uk
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
4 years agoMerge tag 'drm-intel-next-2020-08-24-1' of git://anongit.freedesktop.org/drm/drm...
Dave Airlie [Fri, 28 Aug 2020 03:51:30 +0000 (13:51 +1000)]
Merge tag 'drm-intel-next-2020-08-24-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- Introduce a mechanism to extend execbuf2 (Lionel)
- Add syncobj timeline support (Lionel)

Driver Changes:

- Limit stolen mem usage on the compressed frame buffer (Ville)
- Some clean-up around display's cdclk (Ville)
- Some DDI changes for better DP link training according
  to spec (Imre)
- Provide the perf pmu.module (Chris)
- Remove dobious Valleyview PCI IDs (Alexei)
- Add new display power saving feature for gen12+ called
  HOBL (Jose)
- Move SKL's clock gating w/a to skl_init_clock_gating() (Ville)
- Rocket Lake display additions (Matt)
- Selftest: temporarily downgrade on severity of frequency
            scaling tests (Chris)
- Introduce a new display workaround for fixing FLR related
  issues on new PCH. (Jose)
- Temporarily disable FBC on TGL. It was the culprit of random
  underruns. (Uma).
- Copy default modparams to mock i915_device (Chris)
- Add compiler paranoia for checking HWSP values (Chris)
- Remove useless gen check before calling intel_rps_boost (Chris)
- Fix a null pointer dereference (Chris)
- Add a couple of missing i915_active_fini() (Chris)
- Update TGL display power's bw_buddy table according to
  update spec (Matt)
- Fix couple wrong return values (Tianjia)
- Selftest: Avoid passing random 0 into ilog2 (George)
- Many Tiger Lake display fixes and improvements for Type-C and
  DP compliance (Imre, Jose)
- Start the addition of PSR2 selective fetch (Jose)
- Update a few DMC and HuC firmware versions (Jose)
- Add gen11+ w/a to fix underuns (Matt)
- Fix cmd parser desc matching with mask (Mika)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826232733.GA129053@intel.com
4 years agoMerge tag 'drm-misc-next-2020-08-27' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Fri, 28 Aug 2020 02:37:46 +0000 (12:37 +1000)]
Merge tag 'drm-misc-next-2020-08-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.10:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - ttm: various cleanups and reworks of the API

Driver Changes:
  - ast: various cleanups
  - gma500: A few fixes, conversion to GPIOd API
  - hisilicon: Change of maintainer, various reworks
  - ingenic: Clock handling and formats support improvements
  - mcde: improvements to the DSI support
  - mgag200: Support G200 desktop cards
  - mxsfb: Support the i.MX7 and i.MX8M and the alpha plane
  - panfrost: support devfreq
  - ps8640: Retrieve the EDID from eDP control, misc improvements
  - tidss: Add a workaround for AM65xx YUV formats handling
  - virtio: a few cleanups, support for virtio-gpu exported resources
  - bridges: Support the chained bridges on more drivers,
    new bridges: Toshiba TC358762, Toshiba TC358775, Lontium LT9611
  - panels: Convert to dev_ based logging, read orientation from the DT,
    various fixes, new panels: Mantix MLAF057WE51-X, Chefree CH101OLHLWH-002,
    Powertip PH800480T013, KingDisplay KD116N21-30NV-A010

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827155517.do6emeacetpturli@gilmour.lan
4 years agodrm/mgag200: fix spelling mistake "expeced" -> "expected"
Colin Ian King [Wed, 26 Aug 2020 08:47:27 +0000 (09:47 +0100)]
drm/mgag200: fix spelling mistake "expeced" -> "expected"

There is a spelling mistake in a drm_warn message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826084727.42703-1-colin.king@canonical.com
4 years agodrm/bridge: ps8640: Print an error if VDO control fails
Enric Balletbo i Serra [Wed, 26 Aug 2020 08:15:25 +0000 (10:15 +0200)]
drm/bridge: ps8640: Print an error if VDO control fails

Print an error message inside ps8640_bridge_vdo_control() function when
it fails so we can simplify a bit the callers, they will only need to
check the error code.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com
4 years agodrm/bridge: ps8640: Return an error for incorrect attach flags
Enric Balletbo i Serra [Wed, 26 Aug 2020 08:15:24 +0000 (10:15 +0200)]
drm/bridge: ps8640: Return an error for incorrect attach flags

Bridge drivers that implement the new model only shall return an error
from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
is not set. So make sure we return an error because only the new
drm_bridge model is supported.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com
4 years agodrm/bridge: ps8640: Get the EDID from eDP control
Enric Balletbo i Serra [Wed, 26 Aug 2020 08:15:23 +0000 (10:15 +0200)]
drm/bridge: ps8640: Get the EDID from eDP control

The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
.get_edid callback and set the flag to indicate the core to use it.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com
4 years agodrm/bridge_connector: Set default status connected for eDP connectors
Enric Balletbo i Serra [Wed, 26 Aug 2020 08:15:22 +0000 (10:15 +0200)]
drm/bridge_connector: Set default status connected for eDP connectors

In an eDP application, HPD is not required and on most bridge chips
useless. If HPD is not used, we need to set initial status as connected,
otherwise the connector created by the drm_bridge_connector API remains
in an unknown state.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Bilal Wasim <bwasim.lkml@gmail.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com
4 years agodrm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_drv
Tian Tao [Wed, 19 Aug 2020 09:23:34 +0000 (17:23 +0800)]
drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_drv

Use drm_err instead of DRM_ERROR in hibmc_drm_drv

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-5-git-send-email-tiantao6@hisilicon.com
4 years agodrm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_de
Tian Tao [Wed, 19 Aug 2020 09:23:33 +0000 (17:23 +0800)]
drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_de

Use drm_err instead of DRM_ERROR in hibmc_drm_de

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-4-git-send-email-tiantao6@hisilicon.com
4 years agodrm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_vdac
Tian Tao [Wed, 19 Aug 2020 09:23:32 +0000 (17:23 +0800)]
drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_drm_vdac

Use drm_err instead of DRM_ERROR in hibmc_drm_vdac

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-3-git-send-email-tiantao6@hisilicon.com
4 years agodrm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_ttm
Tian Tao [Wed, 19 Aug 2020 09:23:31 +0000 (17:23 +0800)]
drm/hisilicon: Use drm_err instead of DRM_ERROR in hibmc_ttm

Use drm_err instead of DRM_ERROR in hibmc_ttm.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-2-git-send-email-tiantao6@hisilicon.com
4 years agodrm/i915: Update DRIVER_DATE to 20200824
Rodrigo Vivi [Mon, 24 Aug 2020 18:26:38 +0000 (14:26 -0400)]
drm/i915: Update DRIVER_DATE to 20200824

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
4 years agodrm/ttm: drop bus.size from bus placement.
Dave Airlie [Tue, 11 Aug 2020 07:46:58 +0000 (17:46 +1000)]
drm/ttm: drop bus.size from bus placement.

This is always calculated the same, and only used in a couple of places.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-2-airlied@gmail.com
4 years agodrm/ttm: init mem->bus in common code.
Dave Airlie [Tue, 11 Aug 2020 07:46:57 +0000 (17:46 +1000)]
drm/ttm: init mem->bus in common code.

The drivers all do the same thing here.

Reviewed-by: Christian König <christian.koenig@amd.com> for both.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-1-airlied@gmail.com
4 years agoLinux 5.9-rc2
Linus Torvalds [Sun, 23 Aug 2020 21:08:43 +0000 (14:08 -0700)]
Linux 5.9-rc2

4 years agoMerge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sun, 23 Aug 2020 18:37:23 +0000 (11:37 -0700)]
Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Add perf support for emitting extended registers for power10.

 - A fix for CPU hotplug on pseries, where on large/loaded systems we
   may not wait long enough for the CPU to be offlined, leading to
   crashes.

 - Addition of a raw cputable entry for Power10, which is not required
   to boot, but is required to make our PMU setup work correctly in
   guests.

 - Three fixes for the recent changes on 32-bit Book3S to move modules
   into their own segment for strict RWX.

 - A fix for a recent change in our powernv PCI code that could lead to
   crashes.

 - A change to our perf interrupt accounting to avoid soft lockups when
   using some events, found by syzkaller.

 - A change in the way we handle power loss events from the hypervisor
   on pseries. We no longer immediately shut down if we're told we're
   running on a UPS.

 - A few other minor fixes.

Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.

* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
  powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
  powerpc/pseries: Do not initiate shutdown when system is running on UPS
  powerpc/perf: Fix soft lockups due to missed interrupt accounting
  powerpc/powernv/pci: Fix possible crash when releasing DMA resources
  powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
  powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
  powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
  powerpc/fixmap: Fix the size of the early debug area
  powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
  powerpc/kernel: Cleanup machine check function declarations
  powerpc: Add POWER10 raw mode cputable entry
  powerpc/perf: Add extended regs support for power10 platform
  powerpc/perf: Add support for outputting extended regs in perf intr_regs
  powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores

4 years agoMerge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 23 Aug 2020 18:21:16 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
 "A single fix for x86 which removes the RDPID usage from the paranoid
  entry path and unconditionally uses LSL to retrieve the CPU number.

  RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
  expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
  and restores them either when leaving the run loop, on preemption or
  when going out to user space. MSR_TSX_AUX is part of that lazy MSR
  set, so after writing the guest value and before the lazy restore any
  exception using the paranoid entry will read the guest value and use
  it as CPU number to retrieve the GSBASE value for the current CPU when
  FSGSBASE is enabled. As RDPID is only used in that particular entry
  path, there is no reason to burden VMENTER/EXIT with two extra MSR
  writes. Remove the RDPID optimization, which is not even backed by
  numbers from the paranoid entry path instead"

* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM

4 years agoMerge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 23 Aug 2020 18:15:14 +0000 (11:15 -0700)]
Merge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 perf fix from Thomas Gleixner:
 "A single update for perf on x86 which has support for the broken down
  bandwith counters"

* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown

4 years agoMerge tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 23 Aug 2020 18:08:32 +0000 (11:08 -0700)]
Merge tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull EFI fixes from Thomas Gleixner:

 - Enforce NX on RO data in mixed EFI mode

 - Destroy workqueue in an error handling path to prevent UAF

 - Stop argument parser at '--' which is the delimiter for init

 - Treat a NULL command line pointer as empty instead of dereferncing it
   unconditionally.

 - Handle an unterminated command line correctly

 - Cleanup the 32bit code leftovers and remove obsolete documentation

* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: efi: remove description of efi=old_map
  efi/x86: Move 32-bit code into efi_32.c
  efi/libstub: Handle unterminated cmdline
  efi/libstub: Handle NULL cmdline
  efi/libstub: Stop parsing arguments at "--"
  efi: add missed destroy_workqueue when efisubsys_init fails
  efi/x86: Mark kernel rodata non-executable for mixed mode

4 years agoMerge tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 23 Aug 2020 18:05:47 +0000 (11:05 -0700)]
Merge tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull entry fix from Thomas Gleixner:
 "A single bug fix for the common entry code.

  The transcription of the x86 version messed up the reload of the
  syscall number from pt_regs after ptrace and seccomp which breaks
  syscall number rewriting"

* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  core/entry: Respect syscall number rewrites

4 years agoMerge tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 23 Aug 2020 17:57:19 +0000 (10:57 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

Pull EDAC fix from Borislav Petkov:
 "A single fix correcting a reversed error severity determination check
  which lead to a recoverable error getting marked as fatal, by Tony
  Luck"

* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/{i7core,sb,pnd2,skx}: Fix error event severity

4 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Sun, 23 Aug 2020 17:52:33 +0000 (10:52 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
 "Nothing earth shattering here, lots of small fixes (f.e. missing RCU
  protection, bad ref counting, missing memset(), etc.) all over the
  place:

   1) Use get_file_rcu() in task_file iterator, from Yonghong Song.

   2) There are two ways to set remote source MAC addresses in macvlan
      driver, but only one of which validates things properly. Fix this.
      From Alvin Šipraga.

   3) Missing of_node_put() in gianfar probing, from Sumera
      Priyadarsini.

   4) Preserve device wanted feature bits across multiple netlink
      ethtool requests, from Maxim Mikityanskiy.

   5) Fix rcu_sched stall in task and task_file bpf iterators, from
      Yonghong Song.

   6) Avoid reset after device destroy in ena driver, from Shay
      Agroskin.

   7) Missing memset() in netlink policy export reallocation path, from
      Johannes Berg.

   8) Fix info leak in __smc_diag_dump(), from Peilin Ye.

   9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
      Tomlinson.

  10) Fix number of data stream negotiation in SCTP, from David Laight.

  11) Fix double free in connection tracker action module, from Alaa
      Hleihel.

  12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
  net: nexthop: don't allow empty NHA_GROUP
  bpf: Fix two typos in uapi/linux/bpf.h
  net: dsa: b53: check for timeout
  tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
  net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
  net: sctp: Fix negotiation of the number of data streams.
  dt-bindings: net: renesas, ether: Improve schema validation
  gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
  hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
  hv_netvsc: Remove "unlikely" from netvsc_select_queue
  bpf: selftests: global_funcs: Check err_str before strstr
  bpf: xdp: Fix XDP mode when no mode flags specified
  selftests/bpf: Remove test_align leftovers
  tools/resolve_btfids: Fix sections with wrong alignment
  net/smc: Prevent kernel-infoleak in __smc_diag_dump()
  sfc: fix build warnings on 32-bit
  net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
  libbpf: Fix map index used in error message
  net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
  net: atlantic: Use readx_poll_timeout() for large timeout
  ...

4 years agodrm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctly
Nadezda Lutovinova [Wed, 19 Aug 2020 14:37:56 +0000 (17:37 +0300)]
drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctly

If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr,
then a null pointer dereference is accessed.

The patch adds checking of the return value of ge_b850v3_lvds_init().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru
4 years agodrm/bridge/tc358775: Fix for PTR_ERR
Vinay Simha BN [Sun, 16 Aug 2020 05:50:41 +0000 (11:20 +0530)]
drm/bridge/tc358775: Fix for PTR_ERR

passing zero to 'PTR_ERR'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1597557042-5154-1-git-send-email-simhavcs@gmail.com
4 years agoMerge branch 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Sun, 23 Aug 2020 00:11:38 +0000 (17:11 -0700)]
Merge branch 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull epoll fixes from Al Viro:
 "Fix reference counting and clean up exit paths"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  do_epoll_ctl(): clean the failure exits up a bit
  epoll: Keep a reference on files added to the check list

4 years agodo_epoll_ctl(): clean the failure exits up a bit
Al Viro [Sat, 22 Aug 2020 22:25:52 +0000 (18:25 -0400)]
do_epoll_ctl(): clean the failure exits up a bit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
4 years agoepoll: Keep a reference on files added to the check list
Marc Zyngier [Wed, 19 Aug 2020 16:12:17 +0000 (17:12 +0100)]
epoll: Keep a reference on files added to the check list

When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.

However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
4 years agonet: nexthop: don't allow empty NHA_GROUP
Nikolay Aleksandrov [Sat, 22 Aug 2020 12:06:36 +0000 (15:06 +0300)]
net: nexthop: don't allow empty NHA_GROUP

Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().

 BUG: kernel NULL pointer dereference, address: 0000000000000080
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] SMP
 CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
 RIP: 0010:fib_check_nexthop+0x4a/0xaa
 Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85
 RSP: 0018:ffff88807983ba00 EFLAGS: 00010213
 RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000
 RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80
 RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a
 R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000
 R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001
 FS:  00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0
 Call Trace:
  fib_create_info+0x64d/0xaf7
  fib_table_insert+0xf6/0x581
  ? __vma_adjust+0x3b6/0x4d4
  inet_rtm_newroute+0x56/0x70
  rtnetlink_rcv_msg+0x1e3/0x20d
  ? rtnl_calcit.isra.0+0xb8/0xb8
  netlink_rcv_skb+0x5b/0xac
  netlink_unicast+0xfa/0x17b
  netlink_sendmsg+0x334/0x353
  sock_sendmsg_nosec+0xf/0x3f
  ____sys_sendmsg+0x1a0/0x1fc
  ? copy_msghdr_from_user+0x4c/0x61
  ___sys_sendmsg+0x63/0x84
  ? handle_mm_fault+0xa39/0x11b5
  ? sockfd_lookup_light+0x72/0x9a
  __sys_sendmsg+0x50/0x6e
  do_syscall_64+0x54/0xbe
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f10dacc0bb7
 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48
 RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7
 RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003
 RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008
 R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000
 R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440
 Modules linked in:
 CR2: 0000000000000080

CC: David Ahern <dsahern@gmail.com>
Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahi...
Linus Torvalds [Sat, 22 Aug 2020 17:22:44 +0000 (10:22 -0700)]
Merge tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - move -Wsign-compare warning from W=2 to W=3

 - fix the keyword _restrict to __restrict in genksyms

 - fix more bugs in qconf

* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
  kconfig: qconf: remove redundant help in the info view
  kconfig: qconf: remove qInfo() to get back Qt4 support
  kconfig: qconf: remove unused colNr
  kconfig: qconf: fix the popup menu in the ConfigInfoView window
  kconfig: qconf: fix signal connection to invalid slots
  genksyms: keywords: Use __restrict not _restrict
  kbuild: remove redundant patterns in filter/filter-out
  extract-cert: add static to local data
  Makefile.extrawarn: Move sign-compare from W=2 to W=3

4 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Sat, 22 Aug 2020 17:17:36 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Allow booting of late secondary CPUs affected by erratum 1418040
   (currently they are parked if none of the early CPUs are affected by
   this erratum).

 - Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
   vdso_install' installs the 32-bit compat vdso when it is compiled.

 - Print a warning that untrusted guests without a CPU erratum
   workaround (Cortex-A57 832075) may deadlock the affected system.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ARM64: vdso32: Install vdso32 from vdso_install
  KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
  arm64: Allow booting of late CPUs affected by erratum 1418040
  arm64: Move handling of erratum 1418040 into C code

4 years agoMerge tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Sat, 22 Aug 2020 17:12:49 +0000 (10:12 -0700)]
Merge tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - a couple of fixes for storage key handling relevant for debugging

 - add cond_resched into potentially slow subchannels scanning loop

 - fixes for PF/VF linking and to ignore stale PCI configuration request
   events

* tag 's390-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix PF/VF linking on hot plug
  s390/pci: re-introduce zpci_remove_device()
  s390/pci: fix zpci_bus_link_virtfn()
  s390/ptrace: fix storage key handling
  s390/runtime_instrumentation: fix storage key handling
  s390/pci: ignore stale configuration request event
  s390/cio: add cond_resched() in the slow_eval_known_fn() loop

4 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 22 Aug 2020 17:03:05 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

 - PAE and PKU bugfixes for x86

 - selftests fix for new binutils

 - MMU notifier fix for arm64

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
  KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
  kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
  kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
  KVM: x86: fix access code passed to gva_to_gpa
  selftests: kvm: Use a shorter encoding to clear RAX

4 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 22 Aug 2020 16:56:42 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
  of the changes are in qla2xxx and ufs and all are mostly small and
  definitely don't impact the core"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
  Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
  scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
  scsi: qla2xxx: Check if FW supports MQ before enabling
  scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
  scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
  scsi: qla2xxx: Reduce noisy debug message
  scsi: qla2xxx: Fix login timeout
  scsi: qla2xxx: Indicate correct supported speeds for Mezz card
  scsi: qla2xxx: Flush I/O on zone disable
  scsi: qla2xxx: Flush all sessions on zone disable
  scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
  scsi: scsi_debug: Fix scp is NULL errors
  scsi: zfcp: Fix use-after-free in request timeout handlers
  scsi: ufs: No need to send Abort Task if the task in DB was cleared
  scsi: ufs: Clean up completed request without interrupt notification
  scsi: ufs: Improve interrupt handling for shared interrupts
  scsi: ufs: Fix interrupt error message for shared interrupts
  scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
  scsi: ufs-mediatek: Fix incorrect time to wait link status
  ...

4 years agoMerge tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 22 Aug 2020 16:31:11 +0000 (09:31 -0700)]
Merge tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:
 "Another set of DT fixes:

   - restore range parsing error check

   - workaround PCI range parsing with missing 'device_type' now
     required

   - correct description of 'phy-connection-type'

   - fix erroneous matching on 'snps,dw-pcie' by 'intel,lgm-pcie' schema

   - a couple of grammar and whitespace fixes

   - update Shawn Guo's email"

* tag 'devicetree-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: vendor-prefixes: Remove trailing whitespace
  dt-bindings: net: correct description of phy-connection-type
  dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
  of: address: Work around missing device_type property in pcie nodes
  dt: writing-schema: Miscellaneous grammar fixes
  dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindings
  of/address: check for invalid range.cpu_addr

4 years agodt-bindings: vendor-prefixes: Remove trailing whitespace
Geert Uytterhoeven [Wed, 19 Aug 2020 09:20:58 +0000 (11:20 +0200)]
dt-bindings: vendor-prefixes: Remove trailing whitespace

Fixes: f516fb704d02fff2 ("dt-bindings: Whitespace clean-ups in schema files")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819092058.1526-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
4 years agoKVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
Will Deacon [Tue, 11 Aug 2020 10:27:25 +0000 (11:27 +0100)]
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set

When an MMU notifier call results in unmapping a range that spans multiple
PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary,
since this avoids running into RCU stalls during VM teardown. Unfortunately,
if the VM is destroyed as a result of OOM, then blocking is not permitted
and the call to the scheduler triggers the following BUG():

 | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394
 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper
 | INFO: lockdep is turned off.
 | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1
 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
 | Call trace:
 |  dump_backtrace+0x0/0x284
 |  show_stack+0x1c/0x28
 |  dump_stack+0xf0/0x1a4
 |  ___might_sleep+0x2bc/0x2cc
 |  unmap_stage2_range+0x160/0x1ac
 |  kvm_unmap_hva_range+0x1a0/0x1c8
 |  kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8
 |  __mmu_notifier_invalidate_range_start+0x218/0x31c
 |  mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0
 |  __oom_reap_task_mm+0x128/0x268
 |  oom_reap_task+0xac/0x298
 |  oom_reaper+0x178/0x17c
 |  kthread+0x1e4/0x1fc
 |  ret_from_fork+0x10/0x30

Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we
only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier
flags.

Cc: <stable@vger.kernel.org>
Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd")
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-3-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoKVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
Will Deacon [Tue, 11 Aug 2020 10:27:24 +0000 (11:27 +0100)]
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

The 'flags' field of 'struct mmu_notifier_range' is used to indicate
whether invalidate_range_{start,end}() are permitted to block. In the
case of kvm_mmu_notifier_invalidate_range_start(), this field is not
forwarded on to the architecture-specific implementation of
kvm_unmap_hva_range() and therefore the backend cannot sensibly decide
whether or not to block.

Add an extra 'flags' parameter to kvm_unmap_hva_range() so that
architectures are aware as to whether or not they are permitted to block.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20200811102725.7121-2-will@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agodt-bindings: net: correct description of phy-connection-type
Madalin Bucur [Thu, 20 Aug 2020 10:02:04 +0000 (13:02 +0300)]
dt-bindings: net: correct description of phy-connection-type

The phy-connection-type parameter is described in ePAPR 1.1:

Specifies interface type between the Ethernet device and a physical
layer (PHY) device. The value of this property is specific to the
implementation.

Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://lore.kernel.org/r/1597917724-11127-1-git-send-email-madalin.bucur@oss.nxp.com
Signed-off-by: Rob Herring <robh@kernel.org>
4 years agoMerge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 21 Aug 2020 21:59:16 +0000 (14:59 -0700)]
Merge tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Make sure the head link cancelation includes async work

 - Get rid of kiocb_wait_page_queue_init(), makes no sense to have it as
   a separate function since you moved it into io_uring itself

 - io_import_iovec cleanups (Pavel, me)

 - Use system_unbound_wq for ring exit work, to avoid spawning tons of
   these if we have tons of rings exiting at the same time

 - Fix req->flags overflow flag manipulation (Pavel)

* tag 'io_uring-5.9-2020-08-21' of git://git.kernel.dk/linux-block:
  io_uring: kill extra iovec=NULL in import_iovec()
  io_uring: comment on kfree(iovec) checks
  io_uring: fix racy req->flags modification
  io_uring: use system_unbound_wq for ring exit work
  io_uring: cleanup io_import_iovec() of pre-mapped request
  io_uring: get rid of kiocb_wait_page_queue_init()
  io_uring: find and cancel head link async work on files exit

4 years agodt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances
Rob Herring [Wed, 19 Aug 2020 17:58:16 +0000 (11:58 -0600)]
dt-bindings: PCI: intel,lgm-pcie: Fix matching on all snps,dw-pcie instances

The intel,lgm-pcie binding is matching on all snps,dw-pcie instances
which is wrong. Add a custom 'select' entry to fix this.

Fixes: e54ea45a4955 ("dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Rob Herring <robh@kernel.org>
4 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 21 Aug 2020 21:44:48 +0000 (14:44 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "11 patches.

  Subsystems affected by this: misc, mm/hugetlb, mm/vmalloc, mm/misc,
  romfs, relay, uprobes, squashfs, mm/cma, mm/pagealloc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, page_alloc: fix core hung in free_pcppages_bulk()
  mm: include CMA pages in lowmem_reserve at boot
  squashfs: avoid bio_alloc() failure with 1Mbyte blocks
  uprobes: __replace_page() avoid BUG in munlock_vma_page()
  kernel/relay.c: fix memleak on destroy relay channel
  romfs: fix uninitialized memory leak in romfs_dev_read()
  mm/rodata_test.c: fix missing function declaration
  mm/vunmap: add cond_resched() in vunmap_pmd_range
  khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
  hugetlb_cgroup: convert comma to semicolon
  mailmap: add Andi Kleen

4 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
David S. Miller [Fri, 21 Aug 2020 19:54:50 +0000 (12:54 -0700)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2020-08-21

The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 5 day(s) which contain
a total of 12 files changed, 78 insertions(+), 24 deletions(-).

The main changes are:

1) three fixes in BPF task iterator logic, from Yonghong.

2) fix for compressed dwarf sections in vmlinux, from Jiri.

3) fix xdp attach regression, from Andrii.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 21 Aug 2020 19:32:42 +0000 (12:32 -0700)]
Merge tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - The CLINT driver has been split in two: one to handle the M-mode
   CLINT (memory mapped and used on NOMMU systems) and one to handle the
   S-mode CLINT (via SBI).

 - The addition of SiFive's drivers to rv32_defconfig

* tag 'riscv-for-linus-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Add SiFive drivers to rv32_defconfig
  dt-bindings: timer: Add CLINT bindings
  RISC-V: Remove CLINT related code from timer and arch
  clocksource/drivers: Add CLINT timer driver
  RISC-V: Add mechanism to provide custom IPI operations

4 years agoMerge tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 21 Aug 2020 19:28:33 +0000 (12:28 -0700)]
Merge tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "One build fix and a minor fix for suppressing a useless warning when
  booting a Xen dom0 via UEFI"

* tag 'for-linus-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Fix build error when CONFIG_ACPI is not set/enabled:
  efi: avoid error message when booting under Xen

4 years agoMerge tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Fri, 21 Aug 2020 19:26:58 +0000 (12:26 -0700)]
Merge tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a few issues in the operating performance points (OPP)
  framework.

  Specifics:

   - Fix re-enabling of resources in dev_pm_opp_set_rate() (Rajendra
     Nayak)

   - Fix OPP table reference counting in error paths (Stephen Boyd)"

* tag 'pm-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Enable resources again if they were disabled earlier
  opp: Put opp table in dev_pm_opp_set_rate() if _set_opp_bw() fails
  opp: Put opp table in dev_pm_opp_set_rate() for empty tables

4 years agobpf: Fix two typos in uapi/linux/bpf.h
Tobias Klauser [Fri, 21 Aug 2020 13:36:42 +0000 (15:36 +0200)]
bpf: Fix two typos in uapi/linux/bpf.h

Also remove trailing whitespaces in bpf_skb_get_tunnel_key example code.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821133642.18870-1-tklauser@distanz.ch
4 years agonet: dsa: b53: check for timeout
Tom Rix [Fri, 21 Aug 2020 13:56:00 +0000 (06:56 -0700)]
net: dsa: b53: check for timeout

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
  assignment is an uninitialized value. The computed value will
  also be garbage
        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read().  Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement.  Because
b53_arl_op_wait() already prints out a message, do not add another
one.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoARM64: vdso32: Install vdso32 from vdso_install
Stephen Boyd [Tue, 18 Aug 2020 01:49:50 +0000 (18:49 -0700)]
ARM64: vdso32: Install vdso32 from vdso_install

Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.

Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20200818014950.42492-1-swboyd@chromium.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoMerge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso...
Linus Torvalds [Fri, 21 Aug 2020 18:03:38 +0000 (11:03 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Improvements to ext4's block allocator performance for very large file
  systems, especially when the file system or files which are highly
  fragmented. There is a new mount option, prefetch_block_bitmaps which
  will pull in the block bitmaps and set up the in-memory buddy bitmaps
  when the file system is initially mounted.

  Beyond that, a lot of bug fixes and cleanups. In particular, a number
  of changes to make ext4 more robust in the face of write errors or
  file system corruptions"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
  ext4: limit the length of per-inode prealloc list
  ext4: reorganize if statement of ext4_mb_release_context()
  ext4: add mb_debug logging when there are lost chunks
  ext4: Fix comment typo "the the".
  jbd2: clean up checksum verification in do_one_pass()
  ext4: change to use fallthrough macro
  ext4: remove unused parameter of ext4_generic_delete_entry function
  mballoc: replace seq_printf with seq_puts
  ext4: optimize the implementation of ext4_mb_good_group()
  ext4: delete invalid comments near ext4_mb_check_limits()
  ext4: fix typos in ext4_mb_regular_allocator() comment
  ext4: fix checking of directory entry validity for inline directories
  fs: prevent BUG_ON in submit_bh_wbc()
  ext4: correctly restore system zone info when remount fails
  ext4: handle add_system_zone() failure in ext4_setup_system_zone()
  ext4: fold ext4_data_block_valid_rcu() into the caller
  ext4: check journal inode extents more carefully
  ext4: don't allow overlapping system zones
  ext4: handle error of ext4_setup_system_zone() on remount
  ext4: delete the invalid BUGON in ext4_mb_load_buddy_gfp()
  ...

4 years agoafs: Fix NULL deref in afs_dynroot_depopulate()
David Howells [Fri, 21 Aug 2020 09:15:12 +0000 (10:15 +0100)]
afs: Fix NULL deref in afs_dynroot_depopulate()

If an error occurs during the construction of an afs superblock, it's
possible that an error occurs after a superblock is created, but before
we've created the root dentry.  If the superblock has a dynamic root
(ie.  what's normally mounted on /afs), the afs_kill_super() will call
afs_dynroot_depopulate() to unpin any created dentries - but this will
oops if the root hasn't been created yet.

Fix this by skipping that bit of code if there is no root dentry.

This leads to an oops looking like:

general protection fault, ...
KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f]
...
RIP: 0010:afs_dynroot_depopulate+0x25f/0x529 fs/afs/dynroot.c:385
...
Call Trace:
 afs_kill_super+0x13b/0x180 fs/afs/super.c:535
 deactivate_locked_super+0x94/0x160 fs/super.c:335
 afs_get_tree+0x1124/0x1460 fs/afs/super.c:598
 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
 do_new_mount fs/namespace.c:2875 [inline]
 path_mount+0x1387/0x2070 fs/namespace.c:3192
 do_mount fs/namespace.c:3205 [inline]
 __do_sys_mount fs/namespace.c:3413 [inline]
 __se_sys_mount fs/namespace.c:3390 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

which is oopsing on this line:

inode_lock(root->d_inode);

presumably because sb->s_root was NULL.

Fixes: 0da0b7fd73e4 ("afs: Display manually added cells in dynamic root mount")
Reported-by: syzbot+c1eff8205244ae7e11a6@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodrm: panel: simple: Add KD116N21-30NV-A010
Douglas Anderson [Fri, 21 Aug 2020 15:35:15 +0000 (08:35 -0700)]
drm: panel: simple: Add KD116N21-30NV-A010

Values come from the vendor and have been tested on hardware.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid
4 years agodt-bindings: display: simple: Add KD116N21-30NV-A010 compatible
Douglas Anderson [Fri, 21 Aug 2020 15:35:14 +0000 (08:35 -0700)]
dt-bindings: display: simple: Add KD116N21-30NV-A010 compatible

The KD116N21-30NV-A010 is a pretty standard eDP panel.  Add it to the
list of compatible strings.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.1.I61e6248813d797c9eeebfbb7019c713aa71c4419@changeid
4 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Linus Torvalds [Fri, 21 Aug 2020 17:14:16 +0000 (10:14 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "One regression from 5.8 and a few bugs from earlier kernels:

   - Various spelling corrections in kernel prints

   - Bug fixes in hfi1 and bntx_re

   - Revert a 5.8 patch in hns

   - Batch update for Mellanox and Cumulus maintainers emails"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
  Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
  RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
  RDMA/bnxt_re: Do not add user qps to flushlist
  RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
  RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
  RDMA/hns: Fix spelling mistake "epmty" -> "empty"

4 years agoMerge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 21 Aug 2020 17:07:54 +0000 (10:07 -0700)]
Merge tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes over several drivers, but all are driver-
  specific and nothing looks scary.

  Slightly large changes are seen in ASoC qcom driver for the bugs that
  were revealed by the recent ASoC core change to report the invalid
  register access errors. Also ASoC fsl got a slight intensive change
  for the distortion fix.

  Others are only trivial fixes or device-specific quirks"

* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: hda: avoid reset of sdo_limit
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
  ALSA: usb-audio: ignore broken processing/extension unit
  ASoC: intel: Fix memleak in sst_media_open
  ASoC: wm8994: Avoid attempts to read unreadable registers
  ASoC: msm8916-wcd-analog: fix register Interrupt offset
  ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
  ALSA: hda/realtek: Add model alc298-samsung-headphone
  ALSA: usb-audio: Update documentation comment for MS2109 quirk
  ALSA: isa: fix spelling mistakes in the comments
  ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
  ASoC: q6routing: add dummy register read/write function
  ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
  ASoC: Make soc_component_read() returning an error code again
  ASoC: amd: Replacing component->name with codec_dai->name.
  ASoC: fsl: Fix unused variable warning
  ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
  ...

4 years agoMerge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 21 Aug 2020 17:02:44 +0000 (10:02 -0700)]
Merge tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
  i915 and amdgpu. I'd expect the usual uptick for rc3.

  amdgpu:
   - Fix allocation size
   - SR-IOV fixes
   - Vega20 SMU feature state caching fix
   - Fix custom pptable handling
   - Arcturus golden settings update
   - Several display fixes
   - Fixes for Navy Flounder
   - Misc display fixes
   - RAS fix

  amdkfd:
   - SDMA fix for renoir

  i915:
   - Fix device parameter usage for selftest mock i915 device
   - Fix LPSP capability debugfs NULL dereference
   - Fix buddy register pagemask table
   - Fix intel_atomic_check() non-negative return value
   - Fix selftests passing a random 0 into ilog2()
   - Fix TGL power well enable/disable ordering
   - Switch to PMU module refcounting
   - GVT fixes

  virtio:
   - Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
   - Fix memory leak in virtio_gpu_cleanup_object()"

* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  Revert "drm/amdgpu: disable gfxoff for navy_flounder"
  drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
  drm/i915/selftests: Avoid passing a random 0 into ilog2
  drm/i915: Fix wrong return value in intel_atomic_check()
  drm/i915: Update bw_buddy pagemask table
  drm/i915/display: Check for an LPSP encoder before dereferencing
  drm/i915: Copy default modparams to mock i915_device
  drm/i915: Provide the perf pmu.module
  drm/amd/display: fix pow() crashing when given base 0
  drm/amd/display: Reset scrambling on Test Pattern
  drm/amd/display: fix dcn3 wide timing dsc validation
  drm/amd/display: Fix DFPstate hang due to view port changed
  drm/amd/display: Assign correct left shift
  drm/amd/display: Call DMUB for eDP power control
  drm/amdkfd: fix the wrong sdma instance query for renoir
  drm/amdgpu: parse ta firmware for navy_flounder
  drm/amdgpu: fix NULL pointer access issue when unloading driver
  drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
  drm/amdgpu: disable gfxoff for navy_flounder
  drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
  ...

4 years agomm, page_alloc: fix core hung in free_pcppages_bulk()
Charan Teja Reddy [Fri, 21 Aug 2020 00:42:27 +0000 (17:42 -0700)]
mm, page_alloc: fix core hung in free_pcppages_bulk()

The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.

P1 P2

Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.

Allocate the pages from the
movable zone.

Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.

Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.

Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.

The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.

With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.

This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).

[1]: https://patchwork.kernel.org/patch/11696389/

Fixes: 5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: include CMA pages in lowmem_reserve at boot
Doug Berger [Fri, 21 Aug 2020 00:42:24 +0000 (17:42 -0700)]
mm: include CMA pages in lowmem_reserve at boot

The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones.  Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.

The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.

The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.

The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall.  This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order.  With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.

This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.

In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout

  cma: Reserved 256 MiB at 0x0000000030000000
  Zone ranges:
    DMA      [mem 0x0000000000000000-0x000000002fffffff]
    Normal   empty
    HighMem  [mem 0x0000000030000000-0x000000003fffffff]

would result in 0 lowmem_reserve for the DMA zone.  This would allow
userspace to deplete the DMA zone easily.

Funnily enough

  $ cat /proc/sys/vm/lowmem_reserve_ratio

would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.

This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.

Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agosquashfs: avoid bio_alloc() failure with 1Mbyte blocks
Phillip Lougher [Fri, 21 Aug 2020 00:42:21 +0000 (17:42 -0700)]
squashfs: avoid bio_alloc() failure with 1Mbyte blocks

This is a regression introduced by the patch "migrate from ll_rw_block
usage to BIO".

Bio_alloc() is limited to 256 pages (1 Mbyte).  This can cause a failure
when reading 1 Mbyte block filesystems.  The problem is a datablock can be
fully (or almost uncompressed), requiring 256 pages, but, because blocks
are not aligned to page boundaries, it may require 257 pages to read.

Bio_kmalloc() can handle 1024 pages, and so use this for the edge
condition.

Fixes: 93e72b3c612a ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: Nicolas Prochazka <nicolas.prochazka@gmail.com>
Reported-by: Tomoatsu Shimada <shimada@walbrix.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: Philippe Liard <pliard@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Daniel Rosenberg <drosen@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200815035637.15319-1-phillip@squashfs.org.uk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agouprobes: __replace_page() avoid BUG in munlock_vma_page()
Hugh Dickins [Fri, 21 Aug 2020 00:42:17 +0000 (17:42 -0700)]
uprobes: __replace_page() avoid BUG in munlock_vma_page()

syzbot crashed on the VM_BUG_ON_PAGE(PageTail) in munlock_vma_page(), when
called from uprobes __replace_page().  Which of many ways to fix it?
Settled on not calling when PageCompound (since Head and Tail are equals
in this context, PageCompound the usual check in uprobes.c, and the prior
use of FOLL_SPLIT_PMD will have cleared PageMlocked already).

Fixes: 5a52c9df62b4 ("uprobe: use FOLL_SPLIT_PMD instead of FOLL_SPLIT")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [5.4+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008161338360.20413@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agokernel/relay.c: fix memleak on destroy relay channel
Wei Yongjun [Fri, 21 Aug 2020 00:42:14 +0000 (17:42 -0700)]
kernel/relay.c: fix memleak on destroy relay channel

kmemleak report memory leak as follows:

  unreferenced object 0x607ee4e5f948 (size 8):
  comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s)
  hex dump (first 8 bytes):
  00 00 00 00 00 00 00 00 ........
  backtrace:
     relay_open kernel/relay.c:583 [inline]
     relay_open+0xb6/0x970 kernel/relay.c:563
     do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
     __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
     blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
     blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
     block_ioctl+0xe5/0x120 fs/block_dev.c:1871
     vfs_ioctl fs/ioctl.c:48 [inline]
     __do_sys_ioctl fs/ioctl.c:753 [inline]
     __se_sys_ioctl fs/ioctl.c:739 [inline]
     __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
     do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel.  Fix it by adding free_percpu() before
return from relay_destroy_channel().

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David Rientjes <rientjes@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Akash Goel <akash.goel@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoromfs: fix uninitialized memory leak in romfs_dev_read()
Jann Horn [Fri, 21 Aug 2020 00:42:11 +0000 (17:42 -0700)]
romfs: fix uninitialized memory leak in romfs_dev_read()

romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.

romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device.  It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.

However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes.  This e.g.  means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.

Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.

Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/rodata_test.c: fix missing function declaration
Leon Romanovsky [Fri, 21 Aug 2020 00:42:08 +0000 (17:42 -0700)]
mm/rodata_test.c: fix missing function declaration

The compilation with CONFIG_DEBUG_RODATA_TEST set produces the following
warning due to the missing include.

 mm/rodata_test.c:15:6: warning: no previous prototype for 'rodata_test' [-Wmissing-prototypes]
    15 | void rodata_test(void)
       |      ^~~~~~~~~~~

Fixes: 2959a5f726f6 ("mm: add arch-independent testcases for RODATA")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200819080026.918134-1-leon@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/vunmap: add cond_resched() in vunmap_pmd_range
Aneesh Kumar K.V [Fri, 21 Aug 2020 00:42:05 +0000 (17:42 -0700)]
mm/vunmap: add cond_resched() in vunmap_pmd_range

Like zap_pte_range add cond_resched so that we can avoid softlockups as
reported below.  On non-preemptible kernel with large I/O map region (like
the one we get when using persistent memory with sector mode), an unmap of
the namespace can report below softlockups.

22724.027334] watchdog: BUG: soft lockup - CPU#49 stuck for 23s! [ndctl:50777]
 NIP [c0000000000dc224] plpar_hcall+0x38/0x58
 LR [c0000000000d8898] pSeries_lpar_hpte_invalidate+0x68/0xb0
 Call Trace:
    flush_hash_page+0x114/0x200
    hpte_need_flush+0x2dc/0x540
    vunmap_page_range+0x538/0x6f0
    free_unmap_vmap_area+0x30/0x70
    remove_vm_area+0xfc/0x140
    __vunmap+0x68/0x270
    __iounmap.part.0+0x34/0x60
    memunmap+0x54/0x70
    release_nodes+0x28c/0x300
    device_release_driver_internal+0x16c/0x280
    unbind_store+0x124/0x170
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xd8/0x260
    ksys_write+0xdc/0x130
    system_call+0x5c/0x70

Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200807075933.310240-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agokhugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()
Hugh Dickins [Fri, 21 Aug 2020 00:42:02 +0000 (17:42 -0700)]
khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit().  I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().

Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agohugetlb_cgroup: convert comma to semicolon
Xu Wang [Fri, 21 Aug 2020 00:41:59 +0000 (17:41 -0700)]
hugetlb_cgroup: convert comma to semicolon

Replace a comma between expression statements by a semicolon.

Fixes: faced7e0806cf4 ("mm: hugetlb controller for cgroups v2")
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Link: http://lkml.kernel.org/r/20200818064333.21759-1-vulab@iscas.ac.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomailmap: add Andi Kleen
Nick Desaulniers [Fri, 21 Aug 2020 00:41:56 +0000 (17:41 -0700)]
mailmap: add Andi Kleen

I keep getting bounce back from the suse.de address.

Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Quentin Perret <qperret@qperret.net>
Link: http://lkml.kernel.org/r/20200818203214.659955-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agocore/entry: Respect syscall number rewrites
Thomas Gleixner [Wed, 19 Aug 2020 19:44:39 +0000 (21:44 +0200)]
core/entry: Respect syscall number rewrites

The transcript of the x86 entry code to the generic version failed to
reload the syscall number from ptregs after ptrace and seccomp have run,
which both can modify the syscall number in ptregs. It returns the original
syscall number instead which is obviously not the right thing to do.

Reload the syscall number to fix that.

Fixes: 142781e108b1 ("entry: Provide generic syscall entry functionality")
Reported-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kyle Huey <me@kylehuey.com>
Tested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/87blj6ifo8.fsf@nanos.tec.linutronix.de
4 years agox86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Sean Christopherson [Fri, 21 Aug 2020 10:52:29 +0000 (06:52 -0400)]
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM

KVM has an optmization to avoid expensive MRS read/writes on
VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user space.

The affected MSRs are not required for kernel context operations. This
changed with the recently introduced mechanism to handle FSGSBASE in the
paranoid entry code which has to retrieve the kernel GSBASE value by
accessing per CPU memory. The mechanism needs to retrieve the CPU number
and uses either LSL or RDPID if the processor supports it.

Unfortunately RDPID uses MSR_TSC_AUX which is in the list of cached and
lazily restored MSRs, which means between the point where the guest value
is written and the point of restore, MSR_TSC_AUX contains a random number.

If an NMI or any other exception which uses the paranoid entry path happens
in such a context, then RDPID returns the random guest MSR_TSC_AUX value.

As a consequence this reads from the wrong memory location to retrieve the
kernel GSBASE value. Kernel GS is used to for all regular this_cpu_*()
operations. If the GSBASE in the exception handler points to the per CPU
memory of a different CPU then this has the obvious consequences of data
corruption and crashes.

As the paranoid entry path is the only place which accesses MSR_TSX_AUX
(via RDPID) and the fallback via LSL is not significantly slower, remove
the RDPID alternative from the entry path and always use LSL.

The alternative would be to write MSR_TSC_AUX on every VMENTER and VMEXIT
which would be inflicting massive overhead on that code path.

[ tglx: Rewrote changelog ]

Fixes: eaad981291ee3 ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Debugged-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200821105229.18938-1-pbonzini@redhat.com
4 years agoMAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
Leon Romanovsky [Mon, 10 Aug 2020 09:10:59 +0000 (12:10 +0300)]
MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain

Mellanox and Cumulus Network were acquired by Nvidia, so change the
maintainers emails to new domain name.

Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
4 years agopowerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
Kajol Jain [Fri, 21 Aug 2020 08:06:10 +0000 (13:36 +0530)]
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver

Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.

This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.

  command:# cat /sys/devices/hv_24x7/cpumask
  0

Fixes: 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
4 years agopowerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
Christophe Leroy [Fri, 21 Aug 2020 07:15:25 +0000 (07:15 +0000)]
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000

In is_module_segment(), when VMALLOC_END is over 0xf0000000,
ALIGN(VMALLOC_END, SZ_256M) has value 0.

In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always
true then is_module_segment() always returns false.

Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have
value 0xffffffff and will be suitable for the comparison.

Fixes: c49643319715 ("powerpc/32s: Only leave NX unset on segments used for modules")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
4 years agodrm/tidss: implement WA for AM65xx erratum i2000
Tomi Valkeinen [Wed, 12 Aug 2020 11:26:25 +0000 (14:26 +0300)]
drm/tidss: implement WA for AM65xx erratum i2000

This patch implements WA for AM65xx erratum i2000, which causes YUV
formats to show wrong colors.

An earlier patch removed a partial WA:

a8d9d7da1546349f18eb2d6b6b3a04bdeb38719d ("drm/tidss: remove AM65x PG1 YUV erratum code")

The patch explains the reasoning for removal. The change in plans has
been that it has become clear that there are and will be users for PG1
SoCs and as such it's good to implement the WA for PG1s.

This patch adds the WA back so that it is only used on SR1.0 (which is
the new name for PG1). The previous WA code didn't check the SoC
revision, which this patch does.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
4 years agodrm/omap: fix spelling mistake "propert" -> "property"
Colin Ian King [Wed, 5 Aug 2020 10:20:15 +0000 (11:20 +0100)]
drm/omap: fix spelling mistake "propert" -> "property"

There is a spelling mistake in a pr_err message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805102015.14891-1-colin.king@canonical.com
4 years agodrm: omapdrm: Delete surplus GPIO includes
Linus Walleij [Fri, 26 Jun 2020 22:06:06 +0000 (00:06 +0200)]
drm: omapdrm: Delete surplus GPIO includes

The OMAP DRM driver includes <linux/gpio.h> into the two
hdmi4.c and hdmi5.c files but does not use any symbols from
these files. Drop the includes.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org
4 years agoKVM: arm64: Print warning when cpu erratum can cause guests to deadlock
Rob Herring [Mon, 3 Aug 2020 19:31:25 +0000 (13:31 -0600)]
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock

If guests don't have certain CPU erratum workarounds implemented, then
there is a possibility a guest can deadlock the system. IOW, only trusted
guests should be used on systems with the erratum.

This is the case for Cortex-A57 erratum 832075.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: kvmarm@lists.cs.columbia.edu
Link: https://lore.kernel.org/r/20200803193127.3012242-2-robh@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoarm64: Allow booting of late CPUs affected by erratum 1418040
Marc Zyngier [Fri, 31 Jul 2020 17:38:24 +0000 (18:38 +0100)]
arm64: Allow booting of late CPUs affected by erratum 1418040

As we can now switch from a system that isn't affected by 1418040
to a system that globally is affected, let's allow affected CPUs
to come in at a later time.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agoarm64: Move handling of erratum 1418040 into C code
Marc Zyngier [Fri, 31 Jul 2020 17:38:23 +0000 (18:38 +0100)]
arm64: Move handling of erratum 1418040 into C code

Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:

- It can be applied when it matters (switching between 32 and 64
  bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives

Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
4 years agodrm/i915: Fix cmd parser desc matching with masks
Mika Kuoppala [Mon, 17 Aug 2020 19:59:26 +0000 (22:59 +0300)]
drm/i915: Fix cmd parser desc matching with masks

Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.

We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.

Fix comparisons in order to properly deny access with
associated commands.

v2: fix lri with correct mask (Chris)

References: 926abff21a8f ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
4 years agokconfig: qconf: replace deprecated QString::sprintf() with QTextStream
Masahiro Yamada [Thu, 20 Aug 2020 17:43:28 +0000 (02:43 +0900)]
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream

QString::sprintf() is deprecated in the latest Qt version, and spawns
a lot of warnings:

  HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::menuInfo()’:
scripts/kconfig/qconf.cc:1090:61: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
 1090 |      head += QString().sprintf("<a href=\"s%s\">", sym->name);
      |                                                             ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
                 from /usr/include/qt5/QtWidgets/qaction.h:44,
                 from /usr/include/qt5/QtWidgets/QAction:1,
                 from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
  382 |     QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
      |              ^~~~~~~
scripts/kconfig/qconf.cc:1099:60: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
 1099 |     head += QString().sprintf("<a href=\"s%s\">", sym->name);
      |                                                            ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
                 from /usr/include/qt5/QtWidgets/qaction.h:44,
                 from /usr/include/qt5/QtWidgets/QAction:1,
                 from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
  382 |     QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
      |              ^~~~~~~
scripts/kconfig/qconf.cc:1127:90: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
 1127 |   debug += QString().sprintf("defined at %s:%d<br><br>", _menu->file->name, _menu->lineno);
      |                                                                                          ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
                 from /usr/include/qt5/QtWidgets/qaction.h:44,
                 from /usr/include/qt5/QtWidgets/QAction:1,
                 from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
  382 |     QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
      |              ^~~~~~~
scripts/kconfig/qconf.cc: In member function ‘QString ConfigInfoView::debug_info(symbol*)’:
scripts/kconfig/qconf.cc:1150:68: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
 1150 |    debug += QString().sprintf("prompt: <a href=\"m%s\">", sym->name);
      |                                                                    ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
                 from /usr/include/qt5/QtWidgets/qaction.h:44,
                 from /usr/include/qt5/QtWidgets/QAction:1,
                 from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
  382 |     QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
      |              ^~~~~~~
scripts/kconfig/qconf.cc: In static member function ‘static void ConfigInfoView::expr_print_help(void*, symbol*, const char*)’:
scripts/kconfig/qconf.cc:1225:59: warning: ‘QString& QString::sprintf(const char*, ...)’ is deprecated: Use asprintf(), arg() or QTextStream instead [-Wdeprecated-declarations]
 1225 |   *text += QString().sprintf("<a href=\"s%s\">", sym->name);
      |                                                           ^
In file included from /usr/include/qt5/QtGui/qkeysequence.h:44,
                 from /usr/include/qt5/QtWidgets/qaction.h:44,
                 from /usr/include/qt5/QtWidgets/QAction:1,
                 from scripts/kconfig/qconf.cc:7:
/usr/include/qt5/QtCore/qstring.h:382:14: note: declared here
  382 |     QString &sprintf(const char *format, ...) Q_ATTRIBUTE_FORMAT_PRINTF(2, 3);
      |              ^~~~~~~

The documentation also says:
"Warning: We do not recommend using QString::asprintf() in new Qt code.
Instead, consider using QTextStream or arg(), both of which support
Unicode strings seamlessly and are type-safe."

Use QTextStream as suggested.

Reported-by: Robert Crawford <flacycads@cox.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
4 years agokconfig: qconf: remove redundant help in the info view
Masahiro Yamada [Thu, 20 Aug 2020 17:43:27 +0000 (02:43 +0900)]
kconfig: qconf: remove redundant help in the info view

The same information is repeated in the info view.

Remove the second one.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
4 years agokconfig: qconf: remove qInfo() to get back Qt4 support
Masahiro Yamada [Thu, 20 Aug 2020 15:16:46 +0000 (00:16 +0900)]
kconfig: qconf: remove qInfo() to get back Qt4 support

qconf is supposed to work with Qt4 and Qt5, but since commit
c4f7398bee9c ("kconfig: qconf: make debug links work again"),
building with Qt4 fails as follows:

  HOSTCXX scripts/kconfig/qconf.o
scripts/kconfig/qconf.cc: In member function ‘void ConfigInfoView::clicked(const QUrl&)’:
scripts/kconfig/qconf.cc:1241:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
 1241 |   qInfo() << "Clicked link is empty";
      |   ^~~~~
      |   setInfo
scripts/kconfig/qconf.cc:1254:3: error: ‘qInfo’ was not declared in this scope; did you mean ‘setInfo’?
 1254 |   qInfo() << "Clicked symbol is invalid:" << data;
      |   ^~~~~
      |   setInfo
make[1]: *** [scripts/Makefile.host:129: scripts/kconfig/qconf.o] Error 1
make: *** [Makefile:606: xconfig] Error 2

qInfo() does not exist in Qt4. In my understanding, these call-sites
should be unreachable. Perhaps, qWarning(), assertion, or something
is better, but qInfo() is not the right one to use here, I think.

Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Reported-by: Ronald Warsow <rwarsow@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>