net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode
In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL
register to enable support for 100Mbit link speed.
Fixes: e7364a21077b ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When multiple adapters are present in the system, pci hot-removing second
adapter leads to the following warning as both the adapters registered
thermal zone device with same thermal zone name/type.
Therefore, use unique thermal zone name during thermal zone device
initialization. Also mark thermal zone dev NULL once unregistered.
Fixes: d772b288a83c ("cxgb4: Add thermal zone support") Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Fri, 28 Aug 2020 07:07:52 +0000 (00:07 -0700)]
drivers/net/wan/hdlc_cisco: Add hard_header_len
This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.
This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).
Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 27 Aug 2020 23:44:22 +0000 (16:44 -0700)]
ionic: fix txrx work accounting
Take the tx accounting out of the work_done calculation to
prevent a possible duplicate napi_schedule call when under
high Tx stress but low Rx traffic.
Fixes: d62108868428 ("ionic: tx separate servicing") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien [Sat, 29 Aug 2020 19:37:55 +0000 (02:37 +0700)]
tipc: fix using smp_processor_id() in preemptible
The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current
CPU for encryption, however the execution can be preemptible since it's
actually user-space context, so the 'using smp_processor_id() in
preemptible' has been observed.
We fix the issue by using the 'get/put_cpu_ptr()' API which consists of
a 'preempt_disable()' instead.
Fixes: 09a2b8a4df52 ("tipc: introduce TIPC encryption & authentication") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Tue, 25 Aug 2020 22:07:18 +0000 (00:07 +0200)]
netfilter: conntrack: do not auto-delete clash entries on reply
Its possible that we have more than one packet with the same ct tuple
simultaneously, e.g. when an application emits n packets on same UDP
socket from multiple threads.
NAT rules might be applied to those packets. With the right set of rules,
n packets will be mapped to m destinations, where at least two packets end
up with the same destination.
When this happens, the existing clash resolution may merge the skb that
is processed after the first has been received with the identical tuple
already in hash table.
However, its possible that this identical tuple is a NAT_CLASH tuple.
In that case the second skb will be sent, but no reply can be received
since the reply that is processed first removes the NAT_CLASH tuple.
Do not auto-delete, this gives a 1 second window for replies to be passed
back to originator.
Packets that are coming later (udp stream case) will not be affected:
they match the original ct entry, not a NAT_CLASH one.
Also prevent NAT_CLASH entries from getting offloaded.
Fixes: f0d8cf480908 ("netfilter: conntrack: allow insertion of clashing entries") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fabian Frederick [Sun, 23 Aug 2020 18:15:59 +0000 (20:15 +0200)]
selftests: netfilter: exit on invalid parameters
exit script with comments when parameters are wrong during address
addition. No need for a message when trying to change MTU with lower
values: output is self-explanatory.
Use short testing sequence to avoid shellcheck warnings
(suggested by Stefano Brivio).
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
netfilter: nfnetlink: nfnetlink_unicast() reports EAGAIN instead of ENOBUFS
Frontend callback reports EAGAIN to nfnetlink to retry a command, this
is used to signal that module autoloading is required. Unfortunately,
nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets
full, so it enters a busy-loop.
This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and
to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast()
since this is always MSG_DONTWAIT in the existing code which is exactly
what nlmsg_unicast() passes to netlink_unicast() as parameter.
Fixes: 4a4835e91e03 ("netfilter: add nftables") Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cong Wang [Thu, 27 Aug 2020 17:40:41 +0000 (10:40 -0700)]
net_sched: fix error path in red_init()
When ->init() fails, ->destroy() is called to clean up.
So it is unnecessary to clean up in red_init(), and it
would cause some refcount underflow.
Fixes: af061e4a7c09 ("net: sched: sch_red: Add qevents "early_drop" and "mark"") Reported-and-tested-by: syzbot+b33c1cb0a30ebdc8a5f9@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+e5ea5f8a3ecfd4427a1c@syzkaller.appspotmail.com Cc: Petr Machata <petrm@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Remove 1000baseT_Half to advertise correct hardware capability in
phylink_validate() callback function.
Fixes: 2692d57b4cc6 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Landen Chao <landen.chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
zhudi [Wed, 26 Aug 2020 12:01:13 +0000 (20:01 +0800)]
netlink: fix a data race in netlink_rcv_wake()
The data races were reported by KCSAN:
BUG: KCSAN: data-race in netlink_recvmsg / skb_queue_tail
write (marked) to 0xffff8c0986e5a8c8 of 8 bytes by interrupt on cpu 3:
skb_queue_tail+0xcc/0x120
__netlink_sendskb+0x55/0x80
netlink_broadcast_filtered+0x465/0x7e0
nlmsg_notify+0x8f/0x120
rtnl_notify+0x8e/0xb0
__neigh_notify+0xf2/0x120
neigh_update+0x927/0xde0
arp_process+0x8a3/0xf50
arp_rcv+0x27c/0x3b0
__netif_receive_skb_core+0x181c/0x1840
__netif_receive_skb+0x38/0xf0
netif_receive_skb_internal+0x77/0x1c0
napi_gro_receive+0x1bd/0x1f0
e1000_clean_rx_irq+0x538/0xb20 [e1000]
e1000_clean+0x5e4/0x1340 [e1000]
net_rx_action+0x310/0x9d0
__do_softirq+0xe8/0x308
irq_exit+0x109/0x110
do_IRQ+0x7f/0xe0
ret_from_intr+0x0/0x1d
0xffffffffffffffff
read to 0xffff8c0986e5a8c8 of 8 bytes by task 1463 on cpu 0:
netlink_recvmsg+0x40b/0x820
sock_recvmsg+0xc9/0xd0
___sys_recvmsg+0x1a4/0x3b0
__sys_recvmsg+0x86/0x120
__x64_sys_recvmsg+0x52/0x70
do_syscall_64+0xb5/0x360
entry_SYSCALL_64_after_hwframe+0x65/0xca
0xffffffffffffffff
Since the write is under sk_receive_queue->lock but the read
is done as lockless. so fix it by using skb_queue_empty_lockless()
instead of skb_queue_empty() for the read in netlink_rcv_wake()
Signed-off-by: zhudi <zhudi21@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Aug 2020 13:16:48 +0000 (06:16 -0700)]
Merge tag 'mac80211-for-davem-2020-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have:
* fixes for AQL (airtime queue limits)
* reduce packet loss detection false positives
* a small channel number fix for the 6 GHz band
* a fix for 80+80/160 MHz negotiation
* an nl80211 attribute (NL80211_ATTR_HE_6GHZ_CAPABILITY) fix
* add a missing sanity check for the regulatory code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When stdout output from the selftests tool 'test_maps' gets redirected
into e.g file or pipe, then the output lines increase a lot (from 21
to 33949 lines). This is caused by the printf that happens before the
fork() call, and there are user-space buffered printf data that seems
to be duplicated into the forked process.
To fix this fflush() stdout before the fork loop in __run_parallel().
Dinghao Liu [Thu, 27 Aug 2020 15:55:46 +0000 (16:55 +0100)]
rxrpc: Fix memory leak in rxkad_verify_response()
Fix a memory leak in rxkad_verify_response() whereby the response buffer
doesn't get freed if we fail to allocate a ticket buffer.
Fixes: fc35ed8b9a6a ("rxrpc: Handle temporary errors better in rxkad security") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some fixes for rxrpc and afs to fix issues in the RTT measuring in
rxrpc and thence the Volume Location server probing in afs:
(1) Move the serial number of a received ACK into a local variable to
simplify the next patch.
(2) Fix the loss of RTT samples due to extra interposed ACKs causing
baseline information to be discarded too early. This is a particular
problem for afs when it sends a single very short call to probe a
server it hasn't talked to recently.
(3) Fix rxrpc_kernel_get_srtt() to indicate whether it actually has seen
any valid samples or not.
(4) Remove a field that's set/woken, but never read/waited on.
(5) Expose the RTT and other probe information through procfs to make
debugging of this stuff easier.
(6) Fix VL rotation in afs to only use summary information from VL probing
and not the probe running state (which gets clobbered when next a
probe is issued).
(7) Fix VL rotation to actually return the error aggregated from the probe
errors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Murali Karicheri [Thu, 27 Aug 2020 14:38:39 +0000 (10:38 -0400)]
net: ethernet: ti: cpsw_new: fix error handling in cpsw_ndo_vlan_rx_kill_vid()
This patch fixes a bunch of issues in cpsw_ndo_vlan_rx_kill_vid()
- pm_runtime_get_sync() returns non zero value. This results in
non zero value return to caller which will be interpreted as error.
So overwrite ret with zero.
- If VID matches with port VLAN VID, then set error code.
- Currently when VLAN interface is deleted, all of the VLAN mc addresses
are removed from ALE table, however the return values from ale function
calls are not checked. These functions can return error code -ENOENT.
But that shouldn't happen in a normal case. So add error print to
catch the situations so that these can be investigated and addressed.
return zero in these cases as these are not real error case, but only
serve to catch ALE table update related issues and help address the
same in the driver.
Fixes: f5a1d52100ec ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Himadri Pandya [Thu, 27 Aug 2020 06:53:55 +0000 (12:23 +0530)]
net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()
The buffer size is 2 Bytes and we expect to receive the same amount of
data. But sometimes we receive less data and run into uninit-was-stored
issue upon read. Hence modify the error check on the return value to match
with the buffer size as a prevention.
Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya <himadrispandya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Sat, 8 Aug 2020 17:25:42 +0000 (19:25 +0200)]
mac80211: reduce packet loss event false positives
When running a large number of packets per second with a high data rate
and long A-MPDUs, the packet loss threshold can be reached very quickly
when the link conditions change. This frequently shows up as spurious
disconnects.
Mitigate false positives by using a similar logic for regular stations
as the one being used for TDLS, though with a more aggressive timeout.
Packet loss events are only reported if no ACK was received for a second.
Shay Bar [Wed, 26 Aug 2020 14:31:39 +0000 (17:31 +0300)]
wireless: fix wrong 160/80+80 MHz setting
Fix cfg80211_chandef_usable():
consider IEEE80211_VHT_CAP_EXT_NSS_BW when verifying 160/80+80 MHz.
Based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"
Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200826143139.25976-1-shay.bar@celeno.com
[reformat the code a bit and use u32_get_bits()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Fri, 21 Aug 2020 16:30:45 +0000 (18:30 +0200)]
mac80211: improve AQL aggregation estimation for low data rates
Links with low data rates use much smaller aggregates and are much more
sensitive to latency added by bufferbloat.
Tune the assumed aggregation length based on the tx rate duration.
Felix Fietkau [Fri, 21 Aug 2020 16:30:43 +0000 (18:30 +0200)]
mac80211: use rate provided via status->rate on ieee80211_tx_status_ext for AQL
Since ieee80211_tx_info does not have enough room to encode HE rates, HE
drivers use status->rate to provide rate info.
Store it in struct sta_info and use it for AQL.
David S. Miller [Wed, 26 Aug 2020 23:16:39 +0000 (16:16 -0700)]
Merge branch 'net-fix-netpoll-crash-with-bnxt'
Jakub Kicinski says:
====================
net: fix netpoll crash with bnxt
Rob run into crashes when using XDP on bnxt. Upon investigation
it turns out that during driver reconfig irq core produces
a warning message when IRQs are requested. This triggers netpoll,
which in turn accesses uninitialized driver state. Same crash can
also be triggered on this platform by changing the number of rings.
Looks like we have two missing pieces here, netif_napi_add() has
to make sure we start out with netpoll blocked. The driver also
has to be more careful about when napi gets enabled.
Tested XDP and channel count changes, the warning message no longer
causes a crash. Not sure if the memory barriers added in patch 1
are necessary, but it seems we should have them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Rob Sherwood <rsher@fb.com> Fixes: 93658deae41f ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 26 Aug 2020 19:40:06 +0000 (12:40 -0700)]
net: disable netpoll on fresh napis
napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent
netpoll from accessing rings before init is complete. However, the
same is not done for fresh napi instances in netif_napi_add(),
even though we expect NAPI instances to be added as disabled.
This causes crashes during driver reconfiguration (enabling XDP,
changing the channel count) - if there is any printk() after
netif_napi_add() but before napi_enable().
To ensure memory ordering is correct we need to use RCU accessors.
Reported-by: Rob Sherwood <rsher@fb.com> Fixes: 8df8097a7ef9 ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 26 Aug 2020 16:48:10 +0000 (19:48 +0300)]
ipv4: Silence suspicious RCU usage warning
fib_info_notify_update() is always called with RTNL held, but not from
an RCU read-side critical section. This leads to the following warning
[1] when the FIB table list is traversed with
hlist_for_each_entry_rcu(), but without a proper lockdep expression.
Since modification of the list is protected by RTNL, silence the warning
by adding a lockdep expression which verifies RTNL is held.
[1]
=============================
WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted
-----------------------------
net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/834:
#0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0
Fixes: 89b5a161243e ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Wed, 26 Aug 2020 03:03:53 +0000 (20:03 -0700)]
drivers/net/wan/lapbether: Set network_header before transmitting
Set the skb's network_header before it is passed to the underlying
Ethernet device for transmission.
This patch fixes the following issue:
When we use this driver with AF_PACKET sockets, there would be error
messages of:
protocol 0805 is buggy, dev (Ethernet interface name)
printed in the system "dmesg" log.
This is because skbs passed down to the Ethernet device for transmission
don't have their network_header properly set, and the dev_queue_xmit_nit
function in net/core/dev.c complains about this.
Reason of setting the network_header to this place (at the end of the
Ethernet header, and at the beginning of the Ethernet payload):
Because when this driver receives an skb from the Ethernet device, the
network_header is also set at this place.
Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Tue, 25 Aug 2020 23:31:05 +0000 (01:31 +0200)]
mptcp: free acked data before waiting for more memory
After subflow lock is dropped, more wmem might have been made available.
This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted.
But as the mptcp socket holds on to already-acked data (for retransmit)
no wakeup will occur.
Using 'goto restart' calls mptcp_clean_una(sk) which will free pages
that have been acked completely in the mean time.
Fixes: c11a9ddfd287 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 6f3f73366f14 ("taprio: Add support for hardware
offloading") there's a bit of inconsistency when offloading schedules
to the hardware:
In software mode, the gate masks are specified in terms of traffic
classes, so if say "sched-entry S 03 20000", it means that the traffic
classes 0 and 1 are open for 20us; when taprio is offloaded to
hardware, the gate masks are specified in terms of hardware queues.
The idea here is to fix hardware offloading, so schedules in hardware
and software mode have the same behavior. What's needed to do is to
map traffic classes to queues when applying the offload to the driver.
Fixes: 6f3f73366f14 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 26 Aug 2020 06:52:31 +0000 (14:52 +0800)]
net: cdc_ncm: Fix build error
If USB_NET_CDC_NCM is y and USB_NET_CDCETHER is m, build fails:
drivers/net/usb/cdc_ncm.o:(.rodata+0x1d8): undefined reference to `usbnet_cdc_update_filter'
Select USB_NET_CDCETHER for USB_NET_CDC_NCM to fix this.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a5e7b76e6361 ("net: cdc_ncm: hook into set_rx_mode to admit multicast traffic") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yi Li [Wed, 26 Aug 2020 05:11:50 +0000 (13:11 +0800)]
net: hns3: Fix for geneve tx checksum bug
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL
and it is udp packet, which has a dest port as the IANA assigned.
the hardware is expected to do the checksum offload, but the
hardware will not do the checksum offload when udp dest port is
6081.
This patch fixes it by doing the checksum in software.
Reported-by: Li Bing <libing@winhong.com> Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 26 Aug 2020 14:19:03 +0000 (07:19 -0700)]
Merge branch 'bnxt_en-Bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes.
This set of driver patches include bug fixes for ethtool get channels,
ethtool statistics, ethtool NVRAM, AER recovery, a firmware reset issue
that could potentially crash, hwmon temperature reporting issue on VF,
and 2 fixes for regressions introduced by the recent user-defined RSS
map feature.
Please queue patches 1 to 6 for -stable. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 26 Aug 2020 05:08:39 +0000 (01:08 -0400)]
bnxt_en: Setup default RSS map in all scenarios.
The recent changes to support user-defined RSS map assume that RX
rings are always reserved and the default RSS map is set after the
RX rings are successfully reserved. If the firmware spec is older
than 1.6.1, no ring reservations are required and the default RSS
map is not setup at all. In another scenario where the fw Resource
Manager is older, RX rings are not reserved and we also end up with
no valid RSS map.
Fix both issues in bnxt_need_reserve_rings(). In both scenarios
described above, we don't need to reserve RX rings so we need to
call this new function bnxt_check_rss_map_no_rmgr() to setup the
default RSS map when needed.
Without valid RSS map, the NIC won't receive packets properly.
Fixes: 27fb2e721c0b ("bnxt_en: Add logical RSS indirection table structure.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Wed, 26 Aug 2020 05:08:38 +0000 (01:08 -0400)]
bnxt_en: init RSS table for Minimal-Static VF reservation
There are no VF rings available during probe when the device is configured
using the Minimal-Static reservation strategy. In this case, the RSS
indirection table can only be initialized later, during bnxt_open_nic().
However, this was not happening because the rings will already have been
reserved via bnxt_init_dflt_ring_mode(), causing bnxt_need_reserve_rings()
to return false in bnxt_reserve_rings() and bypass the RSS table init.
Solve this by pushing the call to bnxt_set_dflt_rss_indir_tbl() into
__bnxt_reserve_rings(), which is common to both paths and is called
whenever ring configuration is changed. After doing this, the RSS table
init that must be called from bnxt_init_one() happens implicitly via
bnxt_set_default_rings(), necessitating doing the allocation earlier in
order to avoid a null pointer dereference.
Fixes: d61b49c64761 ("bnxt_en: Implement ethtool -X to set indirection table.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Wed, 26 Aug 2020 05:08:37 +0000 (01:08 -0400)]
bnxt_en: fix HWRM error when querying VF temperature
Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for
VFs. This produces unpleasing error messages in the log when temp1_input
is queried via the hwmon sysfs interface from a VF.
The error is harmless and expected, so silence it and return unknown as
the value. Since the device temperature is not particularly sensitive
information, provide flexibility to change this policy in future by
silencing the error rather than avoiding the HWRM call entirely for VFs.
Fixes: d3dc53f43093 ("bnxt_en: Add hwmon sysfs support to read temperature") Cc: Marc Smith <msmith626@gmail.com> Reported-by: Marc Smith <msmith626@gmail.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 26 Aug 2020 05:08:36 +0000 (01:08 -0400)]
bnxt_en: Fix possible crash in bnxt_fw_reset_task().
bnxt_fw_reset_task() is run from a delayed workqueue. The current
code is not cancelling the workqueue in the driver's .remove()
method and it can potentially crash if the device is removed with
the workqueue still pending.
The fix is to clear the BNXT_STATE_IN_FW_RESET flag and then cancel
the delayed workqueue in bnxt_remove_one(). bnxt_queue_fw_reset_work()
also needs to check that this flag is set before scheduling. This
will guarantee that no rescheduling will be done after it is cancelled.
Fixes: 9e2d4614b3e9 ("bnxt_en: Handle firmware reset.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Wed, 26 Aug 2020 05:08:35 +0000 (01:08 -0400)]
bnxt_en: Fix PCI AER error recovery flow
When a PCI error is detected the PCI state could be corrupt, save
the PCI state after initialization and restore it after the slot
reset.
Fixes: a9ff322f7b57 ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 26 Aug 2020 05:08:34 +0000 (01:08 -0400)]
bnxt_en: Fix ethtool -S statitics with XDP or TCs enabled.
We are returning the wrong count for ETH_SS_STATS in get_sset_count()
when XDP or TCs are enabled. In a recent commit, we got rid of
irrelevant counters when the ring is RX only or TX only, but we
did not make the proper adjustments for the count. As a result,
when we have XDP or TCs enabled, we are returning an excess count
because some of the rings are TX only. This causes ethtool -S to
display extra counters with no counter names.
Fix bnxt_get_num_ring_stats() by not assuming that all rings will
always have RX and TX counters in combined mode.
Fixes: bc62b9444e58 ("bnxt_en: show only relevant ethtool stats for a TX or RX ring") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Wed, 26 Aug 2020 05:08:33 +0000 (01:08 -0400)]
bnxt_en: Check for zero dir entries in NVRAM.
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware
command may return zero dir entries. Return error in such case to
avoid zero length dma buffer request.
Fixes: 93658deae41f ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavan Chebbi [Wed, 26 Aug 2020 05:08:32 +0000 (01:08 -0400)]
bnxt_en: Don't query FW when netif_running() is false.
In rare conditions like two stage OS installation, the
ethtool's get_channels function may be called when the
device is in D3 state, leading to uncorrectable PCI error.
Check netif_running() first before making any query to FW
which involves writing to BAR.
Fixes: 44903db9d864 ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The RGMII control register at 0x32 indicates the states for the bits
RGMII_TX_CLK_DELAY and RGMII_RX_CLK_DELAY as follows:
RGMII Transmit/Receive Clock Delay
0x0 = RGMII transmit clock is shifted with respect to transmit/receive data.
0x1 = RGMII transmit clock is aligned with respect to transmit/receive data.
This commit fixes the inversed behavior of these bits
Fixes: a2c34acb4192 ("net: dp83869: Add RGMII internal delay configuration") Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mingming Cao [Tue, 25 Aug 2020 17:26:41 +0000 (13:26 -0400)]
ibmvnic fix NULL tx_pools and rx_tools issue at do_reset
At the time of do_rest, ibmvnic tries to re-initalize the tx_pools
and rx_pools to avoid re-allocating the long term buffer. However
there is a window inside do_reset that the tx_pools and
rx_pools were freed before re-initialized making it possible to deference
null pointers.
This patch fix this issue by always check the tx_pool
and rx_pool are not NULL after ibmvnic_login. If so, re-allocating
the pools. This will avoid getting into calling reset_tx/rx_pools with
NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in
reset_tx_pools and reset_rx_pools to safe handle NULL pointer case.
Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Murali Karicheri [Mon, 24 Aug 2020 15:10:53 +0000 (11:10 -0400)]
net: ethernet: ti: cpsw_new: fix clean up of vlan mc entries for host port
To flush the vid + mc entries from ALE, which is required when a VLAN
interface is removed, driver needs to call cpsw_ale_flush_multicast()
with ALE_PORT_HOST for port mask as these entries are added only for
host port. Without this, these entries remain in the ALE table even
after removing the VLAN interface. cpsw_ale_flush_multicast() calls
cpsw_ale_flush_mcast which expects a port mask to do the job.
Fixes: f5a1d52100ec ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Murali Karicheri [Mon, 24 Aug 2020 15:10:52 +0000 (11:10 -0400)]
net: ethernet: ti: cpsw: fix clean up of vlan mc entries for host port
To flush the vid + mc entries from ALE, which is required when a VLAN
interface is removed, driver needs to call cpsw_ale_flush_multicast()
with ALE_PORT_HOST for port mask as these entries are added only for
host port. Without this, these entries remain in the ALE table even
after removing the VLAN interface. cpsw_ale_flush_multicast() calls
cpsw_ale_flush_mcast which expects a port mask to do the job.
Fixes: 8f4c602e15ce ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mt7530: Add of_node_put() before break and return statements
Every iteration of for_each_child_of_node() decrements
the reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.
Fix a potential memory leak in mt7530.c by inserting of_node_put()
before the break and return statements.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Tue, 25 Aug 2020 12:59:40 +0000 (14:59 +0200)]
gtp: add GTPA_LINK info to msg sent to userspace
During a dump, this attribute is essential, it enables the userspace to
know on which interface the context is linked to.
Fixes: 1b1001cc4e44 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Gabriel Ganne <gabriel.ganne@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Mon, 24 Aug 2020 14:20:47 +0000 (16:20 +0200)]
bpf, sysctl: Let bpf_stats_handler take a kernel pointer buffer
Commit 601626d6a421 ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of bpf_stats_handler to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/sysctl.c:226:49: warning: incorrect type in argument 3 (different address spaces)
kernel/sysctl.c:226:49: expected void *
kernel/sysctl.c:226:49: got void [noderef] __user *buffer
kernel/sysctl.c:2640:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces))
kernel/sysctl.c:2640:35: expected int ( [usertype] *proc_handler )( ... )
kernel/sysctl.c:2640:35: got int ( * )( ... )
selftests/bpf: Fix test_progs-flavor run getting number of tests
Commit af3b3fb790d2 ("selftests/bpf: Test_progs option for getting number of
tests") introduced ability to getting number of tests, which is targeted
towards scripting. As demonstrate in the commit the number can be use as a
shell variable for further scripting.
The test_progs program support "flavor", which is detected by the binary
have a "-flavor" in the executable name. One example is test_progs-no_alu32,
which load bpf-progs compiled with disabled alu32, located in dir 'no_alu32/'.
The problem is that invoking a "flavor" binary prints to stdout e.g.:
"Switching to flavor 'no_alu32' subdirectory..."
Thus, intermixing with the number of tests, making it unusable for scripting.
Fix the issue by only printing "flavor" info when verbose -v option is used.
Yonghong Song [Fri, 21 Aug 2020 19:10:54 +0000 (12:10 -0700)]
bpf: Fix a buffer out-of-bound access when filling raw_tp link_info
Commit 7b9e52cbecc8 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link")
added link query for raw_tp. One of fields in link_info is to
fill a user buffer with tp_name. The Scurrent checking only
declares "ulen && !ubuf" as invalid. So "!ulen && ubuf" will be
valid. Later on, we do "copy_to_user(ubuf, tp_name, ulen - 1)" which
may overwrite user memory incorrectly.
This patch fixed the problem by disallowing "!ulen && ubuf" case as well.
Fixes: 7b9e52cbecc8 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200821191054.714731-1-yhs@fb.com
Edward Cree [Mon, 24 Aug 2020 15:18:51 +0000 (16:18 +0100)]
sfc: fix boolreturn.cocci warning and rename function
check_fcs() was returning bool as 0/1, which was a sign that the sense
of the function was unclear: false was good, which doesn't really match
a name like 'check_$thing'. So rename it to ef100_has_fcs_error(), and
use proper booleans in the return statements.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ocelot: Add of_node_put() before return statement
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.
Fix a potential memory leak in felix.c by inserting of_node_put()
before the return statement.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: ee04f7ece920 ("dt-bindings: net: dsa: Let dsa.txt refer to dsa.yaml") Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Dinghao Liu [Sun, 23 Aug 2020 08:56:47 +0000 (16:56 +0800)]
net: arc_emac: Fix memleak in arc_mdio_probe
When devm_gpiod_get_optional() fails, bus should be
freed just like when of_mdiobus_register() fails.
Fixes: eff7efa704ee6 ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
MAINTAINERS: Remove self from PHY LIBRARY
This patch series aims at allowing myself to keep track of the Ethernet
PHY and MDIO bus drivers that I authored or contributed to without
being listed as a maintainer in the PHY library anymore.
Thank you for the fish, I will still be around.
This builds on top of Andrew's series:
https://lore.kernel.org/netdev/20200822180611.2576807-1-andrew@lunn.ch/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 22 Aug 2020 20:11:26 +0000 (13:11 -0700)]
MAINTAINERS: Remove self from PHY LIBRARY
My last significant achievements to the PHY library was ensuring we
would have small bus factor by having Andrew and Heiner added. The world
has moved on past 1G, but I have not, so let more competent maintainers
take over.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 22 Aug 2020 20:11:25 +0000 (13:11 -0700)]
MAINTAINERS: Add entry for Broadcom Ethernet PHY drivers
Add an entry for the Broadcom Ethernet PHY drivers covering the BCM63xx,
BCM7xxx, BCM87xx, BCM54140, BCM84881, the venerable broadcom.c driver
and the companion library files.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for removing myself from the PHYLIB entry, add the UniMAC
MDIO controller files (DT binding, driver and platform_data header) to
the GENET entry. The UniMAC MDIO controller is essential to the GENET
operation, therefore it makes sense to group them together.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 22 Aug 2020 20:11:23 +0000 (13:11 -0700)]
MAINTAINERS: GENET: Add DT binding file
When the DT binding was added in b87933801e5b ("Documentation: add
Device tree bindings for Broadcom GENET"), the file was not explicitly
listed under the GENET MAINTAINERS section, do that now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 22 Aug 2020 20:11:22 +0000 (13:11 -0700)]
MAINTAINERS: B53: Add DT binding file
When the binding was added with 89fb23a74505 ("net: dsa: b53: Add
support for Broadcom RoboSwitch"), it was not explicitly added to the
B53 MAINTAINERS file section, add it now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Sat, 22 Aug 2020 20:11:21 +0000 (13:11 -0700)]
MAINTAINERS: GENET: Add missing platform data file
When commit 303161a951d0 ("net: bcmgenet: enable driver to work without
a device tree") added include/linux/platform_data/bcmgenet.h, the file
was not added to the GENET MAINTAINERS file section, add it now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: sja1105: Do not use address of compatible member in sja1105_check_device_id
Clang warns:
drivers/net/dsa/sja1105/sja1105_main.c:3418:38: warning: address of
array 'match->compatible' will always evaluate to 'true'
[-Wpointer-bool-conversion]
for (match = sja1105_dt_ids; match->compatible; match++) {
~~~ ~~~~~~~^~~~~~~~~~
1 warning generated.
We should check the value of the first character in compatible to see if
it is empty or not. This matches how the rest of the tree iterates over
IDs.
Fixes: faa485bee94f ("net: dsa: sja1105: use detected device id instead of DT one on mismatch") Link: https://github.com/ClangBuiltLinux/linux/issues/1139 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xie He [Fri, 21 Aug 2020 21:26:59 +0000 (14:26 -0700)]
drivers/net/wan/lapbether: Added needed_tailroom
The underlying Ethernet device may request necessary tailroom to be
allocated by setting needed_tailroom. This driver should also set
needed_tailroom to request the tailroom needed by the underlying
Ethernet device to be allocated.
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Moore [Fri, 21 Aug 2020 20:34:52 +0000 (16:34 -0400)]
netlabel: fix problems with mapping removal
This patch fixes two main problems seen when removing NetLabel
mappings: memory leaks and potentially extra audit noise.
The memory leaks are caused by not properly free'ing the mapping's
address selector struct when free'ing the entire entry as well as
not properly cleaning up a temporary mapping entry when adding new
address selectors to an existing entry. This patch fixes both these
problems such that kmemleak reports no NetLabel associated leaks
after running the SELinux test suite.
The potentially extra audit noise was caused by the auditing code in
netlbl_domhsh_remove_entry() being called regardless of the entry's
validity. If another thread had already marked the entry as invalid,
but not removed/free'd it from the list of mappings, then it was
possible that an additional mapping removal audit record would be
generated. This patch fixes this by returning early from the removal
function when the entry was previously marked invalid. This change
also had the side benefit of improving the code by decreasing the
indentation level of large chunk of code by one (accounting for most
of the diffstat).
Fixes: b23e3bb1b1f3 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Fri, 21 Aug 2020 06:59:38 +0000 (14:59 +0800)]
sctp: not disable bh in the whole sctp_get_port_local()
With disabling bh in the whole sctp_get_port_local(), when
snum == 0 and too many ports have been used, the do-while
loop will take the cpu for a long time and cause cpu stuck:
There's no need to disable bh in the whole function of
sctp_get_port_local. So fix this cpu stuck by removing
local_bh_disable() called at the beginning, and using
spin_lock_bh() instead.
The same thing was actually done for inet_csk_get_port() in
Commit a20abb750f3f ("tcp/dccp: better use of ephemeral
ports in bind()").
Thanks to Marcelo for pointing the buggy code out.
v1->v2:
- use cond_resched() to yield cpu to other tasks if needed,
as Eric noticed.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuusuke Ashizuka [Thu, 20 Aug 2020 09:43:07 +0000 (18:43 +0900)]
ravb: Fixed to be able to unload modules
When this driver is built as a module, I cannot rmmod it after insmoding
it.
This is because that this driver calls ravb_mdio_init() at the time of
probe, and module->refcnt is incremented by alloc_mdio_bitbang() called
after that.
Therefore, even if ifup is not performed, the driver is in use and rmmod
cannot be performed.
$ lsmod
Module Size Used by
ravb 40960 1
$ rmmod ravb
rmmod: ERROR: Module ravb is in use
Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby
rmmod is possible in the ifdown state.
Fixes: a6c893cbad16 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yuusuke Ashizuka <ashiduka@fujitsu.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 601626d6a421 ("sysctl: pass kernel pointers to ->proc_handler")
changed ndisc_ifinfo_sysctl_change to take a kernel pointer. Adjust its
prototype in net/ndisc.h as well to fix the following sparse warning:
net/ipv6/ndisc.c:1838:5: error: symbol 'ndisc_ifinfo_sysctl_change' redeclared with different type (incompatible argument 3 (different address spaces)):
net/ipv6/ndisc.c:1838:5: int extern [addressable] [signed] [toplevel] ndisc_ifinfo_sysctl_change( ... )
net/ipv6/ndisc.c: note: in included file (through include/net/ipv6.h):
./include/net/ndisc.h:496:5: note: previously declared as:
./include/net/ndisc.h:496:5: int extern [addressable] [signed] [toplevel] ndisc_ifinfo_sysctl_change( ... )
net/ipv6/ndisc.c: note: in included file (through include/net/ip6_route.h):
Fixes: 601626d6a421 ("sysctl: pass kernel pointers to ->proc_handler") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Dinghao Liu [Mon, 24 Aug 2020 05:58:31 +0000 (13:58 +0800)]
net: systemport: Fix memleak in bcm_sysport_probe
When devm_kcalloc() fails, dev should be freed just
like what we've done in the subsequent error paths.
Fixes: 1b639763c12d8 ("net: systemport: Dynamically allocate number of TX rings") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Dinghao Liu [Mon, 24 Aug 2020 05:44:42 +0000 (13:44 +0800)]
net: hns: Fix memleak in hns_nic_dev_probe
hns_nic_dev_probe allocates ndev, but not free it on
two error handling paths, which may lead to memleak.
Fixes: ec09c2da77158 ("net: hns: net: hns: enet adds support of acpi") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 23 Aug 2020 18:37:23 +0000 (11:37 -0700)]
Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
Linus Torvalds [Sun, 23 Aug 2020 18:21:16 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
Linus Torvalds [Sun, 23 Aug 2020 18:15:14 +0000 (11:15 -0700)]
Merge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
Linus Torvalds [Sun, 23 Aug 2020 18:05:47 +0000 (11:05 -0700)]
Merge tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
Linus Torvalds [Sun, 23 Aug 2020 17:57:19 +0000 (10:57 -0700)]
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Linus Torvalds [Sun, 23 Aug 2020 00:11:38 +0000 (17:11 -0700)]
Merge branch 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull epoll fixes from Al Viro:
"Fix reference counting and clean up exit paths"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_epoll_ctl(): clean the failure exits up a bit
epoll: Keep a reference on files added to the check list
Marc Zyngier [Wed, 19 Aug 2020 16:12:17 +0000 (17:12 +0100)]
epoll: Keep a reference on files added to the check list
When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.
However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.
Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the nexthop code will use an empty NHA_GROUP attribute, but it
requires at least 1 entry in order to function properly. Otherwise we
end up derefencing null or random pointers all over the place due to not
having any nh_grp_entry members allocated, nexthop code relies on having at
least the first member present. Empty NHA_GROUP doesn't make any sense so
just disallow it.
Also add a WARN_ON for any future users of nexthop_create_group().
CC: David Ahern <dsahern@gmail.com> Fixes: 6e9d1ef54f91 ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 22 Aug 2020 17:22:44 +0000 (10:22 -0700)]
Merge tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- move -Wsign-compare warning from W=2 to W=3
- fix the keyword _restrict to __restrict in genksyms
- fix more bugs in qconf
* tag 'kbuild-fixes-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: qconf: replace deprecated QString::sprintf() with QTextStream
kconfig: qconf: remove redundant help in the info view
kconfig: qconf: remove qInfo() to get back Qt4 support
kconfig: qconf: remove unused colNr
kconfig: qconf: fix the popup menu in the ConfigInfoView window
kconfig: qconf: fix signal connection to invalid slots
genksyms: keywords: Use __restrict not _restrict
kbuild: remove redundant patterns in filter/filter-out
extract-cert: add static to local data
Makefile.extrawarn: Move sign-compare from W=2 to W=3
Linus Torvalds [Sat, 22 Aug 2020 17:17:36 +0000 (10:17 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow booting of late secondary CPUs affected by erratum 1418040
(currently they are parked if none of the early CPUs are affected by
this erratum).
- Add the 32-bit vdso Makefile to the vdso_install rule so that 'make
vdso_install' installs the 32-bit compat vdso when it is compiled.
- Print a warning that untrusted guests without a CPU erratum
workaround (Cortex-A57 832075) may deadlock the affected system.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ARM64: vdso32: Install vdso32 from vdso_install
KVM: arm64: Print warning when cpu erratum can cause guests to deadlock
arm64: Allow booting of late CPUs affected by erratum 1418040
arm64: Move handling of erratum 1418040 into C code
Linus Torvalds [Sat, 22 Aug 2020 17:03:05 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- PAE and PKU bugfixes for x86
- selftests fix for new binutils
- MMU notifier fix for arm64
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set
KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()
kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode
kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode
KVM: x86: fix access code passed to gva_to_gpa
selftests: kvm: Use a shorter encoding to clear RAX
Linus Torvalds [Sat, 22 Aug 2020 16:56:42 +0000 (09:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"23 fixes in 5 drivers (qla2xxx, ufs, scsi_debug, fcoe, zfcp). The bulk
of the changes are in qla2xxx and ufs and all are mostly small and
definitely don't impact the core"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"
Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"
scsi: qla2xxx: Fix null pointer access during disconnect from subsystem
scsi: qla2xxx: Check if FW supports MQ before enabling
scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hba
scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set anytime
scsi: qla2xxx: Reduce noisy debug message
scsi: qla2xxx: Fix login timeout
scsi: qla2xxx: Indicate correct supported speeds for Mezz card
scsi: qla2xxx: Flush I/O on zone disable
scsi: qla2xxx: Flush all sessions on zone disable
scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout values
scsi: scsi_debug: Fix scp is NULL errors
scsi: zfcp: Fix use-after-free in request timeout handlers
scsi: ufs: No need to send Abort Task if the task in DB was cleared
scsi: ufs: Clean up completed request without interrupt notification
scsi: ufs: Improve interrupt handling for shared interrupts
scsi: ufs: Fix interrupt error message for shared interrupts
scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHL
scsi: ufs-mediatek: Fix incorrect time to wait link status
...
projects / kernel.git / log