tools build: Filter out options and warnings not supported by clang
These make the feature check fail when using clang, so remove them just
like is done in tools/perf/Makefile.config to build perf itself.
Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config
when building with clang is also necessary to avoid these warnings
turned into errors (-Werror):
CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o
In file included from util/scripting-engines/trace-event-perl.c:35:
In file included from /usr/lib64/perl5/CORE/perl.h:4085:
In file included from /usr/lib64/perl5/CORE/hv.h:659:
In file included from /usr/lib64/perl5/CORE/hv_func.h:34:
In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4:
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^~~~~~~~~~
/usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START'
# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
v ^= (v>>23); \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
} STMT_END
^~~~~~~~
/usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END'
# define STMT_END )
^
Please refer to the discussion on the Link: tag below, where Nathan
clarifies the situation:
<quote>
acme> And then get to the problems at the end of this message, which seem
acme> similar to the problem described here:
acme>
acme> From Nathan Chancellor <>
acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
acme>
acme> https://lkml.org/lkml/2020/9/1/135
acme>
acme> So perhaps in this case its better to disable that
acme> -Werror,-Wcompound-token-split-by-macro when building with clang?
Yes, I think that is probably the best solution. As far as I can tell,
at least in this file and context, the warning appears harmless, as the
"create a GNU C statement expression from two different macros" is very
much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS.
The warning is fixed in upstream Perl by just avoiding creating GNU C
statement expressions using STMT_START and STMT_END:
If I am reading the source code correctly, an alternative to disabling
the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it
seems like that might end up impacting more than just this site,
according to the issue discussion above.
</quote>
Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools include UAPI: Sync linux/vhost.h with the kernel sources
To get the changes in:
6555b38122fe3d0a ("vdpa: support exposing the count of vqs to userspace") 1163db6bffe2c8cf ("vdpa: support exposing the config size to userspace")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
$ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
--- tools/include/uapi/linux/vhost.h 2021-07-15 16:17:01.840818309 -0300
+++ include/uapi/linux/vhost.h 2022-04-02 18:55:05.702522387 -0300
@@ -150,4 +150,11 @@
/* Get the valid iova range */
#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
struct vhost_vdpa_iova_range)
+
+/* Get the config size */
+#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32)
+
+/* Get the count of all virtqueues */
+#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32)
+
#endif
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2022-04-04 14:52:25.036375145 -0300
+++ after 2022-04-04 14:52:31.906549976 -0300
@@ -38,4 +38,6 @@
[0x73] = "VDPA_GET_CONFIG",
[0x76] = "VDPA_GET_VRING_NUM",
[0x78] = "VDPA_GET_IOVA_RANGE",
+ [0x79] = "VDPA_GET_CONFIG_SIZE",
+ [0x80] = "VDPA_GET_VQS_COUNT",
};
$
Merge tag 'block-5.18-2022-04-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Nothing major in here, just a few small fixes:
- Small series of neglected drbd patches (Christoph, Lv, Xiaomeng)
- Remove dead variable in cdrom (Enze)"
* tag 'block-5.18-2022-04-08' of git://git.kernel.dk/linux-block:
drbd: set QUEUE_FLAG_STABLE_WRITES
drbd: fix an invalid memory access caused by incorrect use of list iterator
drbd: Fix five use after free bugs in get_initial_state
cdrom: remove unused variable
Merge tag 'io_uring-5.18-2022-04-08' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit bigger than usual post merge window, largely due to a revert and
a fix of at what point files are assigned for requests.
The latter fixing a linked request use case where a dependent link can
rely on what file is assigned consistently.
Summary:
- 32-bit compat fix for IORING_REGISTER_IOWQ_AFF (Eugene)
- File assignment fixes (me)
- Revert of the NAPI poll addition from this merge window. The author
isn't available right now to engage on this, so let's revert it and
we can retry for the 5.19 release (me, Jakub)
- Fix a timeout removal race (me)
- File update and SCM fixes (Pavel)"
* tag 'io_uring-5.18-2022-04-08' of git://git.kernel.dk/linux-block:
io_uring: fix race between timeout flush and removal
io_uring: use nospec annotation for more indexes
io_uring: zero tag on rsrc removal
io_uring: don't touch scm_fp_list after queueing skb
io_uring: nospec index for tags on files update
io_uring: implement compat handling for IORING_REGISTER_IOWQ_AFF
Revert "io_uring: Add support for napi_busy_poll"
io_uring: drop the old style inflight file tracking
io_uring: defer file assignment
io_uring: propagate issue_flags state down to file assignment
io_uring: move read/write file prep state into actual opcode handler
io_uring: defer splice/tee file validity check until command issue
io_uring: don't check req->file in io_fsync_prep()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several bug fixes for old bugs:
- Welcome Leon as co-maintainer for RDMA so we are back to having two
people
- Some corner cases are fixed in mlx5's MR code
- Long standing CM bug where a DREQ at the wrong time can result in a
long timeout
- Missing locking and refcounting in hf1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hfi1: Fix use-after-free bug for mm struct
IB/rdmavt: add lock to call to rvt_error_qp to prevent a race condition
IB/cm: Cancel mad on the DREQ event when the state is MRA_REP_RCVD
RDMA/mlx5: Add a missing update of cache->last_add
RDMA/mlx5: Don't remove cache MRs when a delay is needed
MAINTAINERS: Update qib and hfi1 related drivers
MAINTAINERS: Add Leon Romanovsky to RDMA maintainers
Merge tag 'acpi-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These revert a problematic commit from the 5.17 development cycle and
finalize the elimination of acpi_bus_get_device() that mostly took
place during the recent merge window.
Specifics:
- Revert an ACPI processor driver change related to cache
invalidation in acpi_idle_play_dead() that clearly was a mistake
and introduced user-visible regressions (Akihiko Odaki).
- Replace the last instance of acpi_bus_get_device() added during the
recent merge window and drop the function to prevent more users of
it from being added (Rafael Wysocki)"
* tag 'acpi-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Eliminate acpi_bus_get_device()
Revert "ACPI: processor: idle: Only flush cache on entering C3"
Merge tag 'linux-kselftest-kunit-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"A single documentation fix to incorrect and outdated usage
information"
* tag 'linux-kselftest-kunit-fixes-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: fix path to .kunitconfig in start.rst
Subsystems affected by this patch series: mm (migration, highmem,
sparsemem, mremap, mempolicy, and memcg), lz4, mailmap, and
MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add Tom as clang reviewer
mm/list_lru.c: revert "mm/list_lru: optimize memcg_reparent_list_lru_node()"
mailmap: update Vasily Averin's email address
mm/mempolicy: fix mpol_new leak in shared_policy_replace
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
lz4: fix LZ4_decompress_safe_partial read out of bound
highmem: fix checks in __kmap_local_sched_{in,out}
mm: migrate: use thp_order instead of HPAGE_PMD_ORDER for new page allocation.
Commit 14eca45c4e5a ("mm/list_lru: optimize memcg_reparent_list_lru_node()")
has subtle races which are proving ugly to fix. Revert the original
optimization. If quantitative testing indicates that we have a
significant problem here then other implementations can be looked at.
Fixes: 14eca45c4e5a ("mm/list_lru: optimize memcg_reparent_list_lru_node()") Acked-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Waiman Long <longman@redhat.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miaohe Lin [Fri, 8 Apr 2022 20:09:07 +0000 (13:09 -0700)]
mm/mempolicy: fix mpol_new leak in shared_policy_replace
If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller. But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new. This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.
This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:
Paolo Bonzini [Fri, 8 Apr 2022 20:09:04 +0000 (13:09 -0700)]
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
If an mremap() syscall with old_size=0 ends up in move_page_tables(), it
will call invalidate_range_start()/invalidate_range_end() unnecessarily,
i.e. with an empty range.
This causes a WARN in KVM's mmu_notifier. In the past, empty ranges
have been diagnosed to be off-by-one bugs, hence the WARNing. Given the
low (so far) number of unique reports, the benefits of detecting more
buggy callers seem to outweigh the cost of having to fix cases such as
this one, where userspace is doing something silly. In this particular
case, an early return from move_page_tables() is enough to fix the
issue.
Link: https://lkml.kernel.org/r/20220329173155.172439-1-pbonzini@redhat.com Reported-by: syzbot+6bde52d89cfdf9f61425@syzkaller.appspotmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the !CONFIG_SPARSEMEM_EXTREME case, mem_section is a static
2-dimensional array and so the check "!mem_section[SECTION_NR_TO_ROOT(nr)]"
doesn't make sense.
Fix this warning by moving the "!mem_section[SECTION_NR_TO_ROOT(nr)]"
check up inside the CONFIG_SPARSEMEM_EXTREME block and adding an
explicit NR_SECTION_ROOTS check to make sure that there is no
out-of-bound array access.
Link: https://lkml.kernel.org/r/20220331180246.2746210-1-longman@redhat.com Fixes: 090ad1374374 ("sparsemem extreme implementation") Signed-off-by: Waiman Long <longman@redhat.com> Reported-by: Justin Forbes <jforbes@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lz4: fix LZ4_decompress_safe_partial read out of bound
When partialDecoding, it is EOF if we've either filled the output buffer
or can't proceed with reading an offset for following match.
In some extreme corner cases when compressed data is suitably corrupted,
UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial
may lead to read out of bound problem during decoding. lz4 upstream has
fixed it [2] and this issue has been disscussed here [3] before.
current decompression routine was ported from lz4 v1.8.3, bumping
lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd
better fix it first.
Max Filippov [Fri, 8 Apr 2022 20:08:55 +0000 (13:08 -0700)]
highmem: fix checks in __kmap_local_sched_{in,out}
When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are
initialized with 0 value, but the check is done with pte_none. 0 pte
however does not necessarily mean that pte_none will return true. e.g.
on xtensa it returns false, resulting in the following runtime warnings:
Zi Yan [Fri, 8 Apr 2022 20:08:52 +0000 (13:08 -0700)]
mm: migrate: use thp_order instead of HPAGE_PMD_ORDER for new page allocation.
Fix a VM_BUG_ON_FOLIO(folio_nr_pages(old) != nr_pages) crash.
With folios support, it is possible to have other than HPAGE_PMD_ORDER
THPs, in the form of folios, in the system. Use thp_order() to correctly
determine the source page order during migration.
Link: https://lkml.kernel.org/r/20220404165325.1883267-1-zi.yan@sent.com Link: https://lore.kernel.org/linux-mm/20220404132908.GA785673@u2004/ Fixes: 246a553bfc0d ("mm/filemap: Allow large folios to be added to the page cache") Reported-by: Naoya Horiguchi <naoya.horiguchi@linux.dev> Signed-off-by: Zi Yan <ziy@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
io_uring: fix race between timeout flush and removal
io_flush_timeouts() assumes the timeout isn't in progress of triggering
or being removed/canceled, so it unconditionally removes it from the
timeout list and attempts to cancel it.
Leave it on the list and let the normal timeout cancelation take care
of it.
Douglas Miller [Fri, 8 Apr 2022 13:35:23 +0000 (09:35 -0400)]
RDMA/hfi1: Fix use-after-free bug for mm struct
Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may
represent the last reference held on the task mm.
hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed
before the final use in hfi1_release_user_pages(). A new task may
allocate the mm structure while it is still being used, resulting in
problems. One manifestation is corruption of the mmap_sem counter leading
to a hang in down_write(). Another is corruption of an mm struct that is
in use by another task.
Fixes: 6a58255abb5e ("IB/hfi1: Ensure correct mm is used at all times") Link: https://lore.kernel.org/r/20220408133523.122165.72975.stgit@awfm-01.cornelisnetworks.com Cc: <stable@vger.kernel.org> Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge tag 'nfs-for-5.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Stable fixes:
- SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
Bugfixes:
- Fix an Oopsable condition due to SLAB_ACCOUNT setting in the
NFSv4.2 xattr code.
- Fix for open() using an file open mode of '3' in NFSv4
- Replace readdir's use of xxhash() with hash_64()
- Several patches to handle malloc() failure in SUNRPC"
* tag 'nfs-for-5.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Move the call to xprt_send_pagedata() out of xprt_sock_sendmsg()
SUNRPC: svc_tcp_sendmsg() should handle errors from xdr_alloc_bvec()
SUNRPC: Handle allocation failure in rpc_new_task()
NFS: Ensure rpc_run_task() cannot fail in nfs_async_rename()
NFSv4/pnfs: Handle RPC allocation errors in nfs4_proc_layoutget
SUNRPC: Handle low memory situations in call_status()
SUNRPC: Handle ENOMEM in call_transmit_status()
NFSv4.2: Fix missing removal of SLAB_ACCOUNT on kmem_cache allocation
SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
NFS: Replace readdir's use of xxhash() with hash_64()
SUNRPC: handle malloc failure in ->request_prepare
NFSv4: fix open failure with O_ACCMODE flag
Revert "NFSv4: Handle the special Linux file open access mode"
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The two main things to note are:
(1) The bulk of the diffstat is us reverting a horrible bodge we had
in place to ease the merging of maple tree during the merge
window (which turned out not to be needed, but anyway)
(2) The TLB invalidation fix is done in core code, as suggested by
(and Acked-by) Peter.
Summary:
- Revert temporary bodge in MTE coredumping to ease maple tree integration
- Fix stack frame size warning reported with 64k pages
- Fix stop_machine() race with instruction text patching
- Ensure alternatives patching routines are not instrumented
- Enable Spectre-BHB mitigation for Cortex-A78AE
- Fix hugetlb TLB invalidation when contiguous hint is used
- Minor perf driver fixes
- Fix some typos"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
arm64: Add part number for Arm Cortex-A78AE
arm64: patch_text: Fixup last cpu should be master
tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entry
arm64: alternatives: mark patch_alternative() as `noinstr`
perf: MARVELL_CN10K_DDR_PMU should depend on ARCH_THUNDER
perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
arm64: Fix comments in macro __init_el2_gicv3
arm64: fix typos in comments
arch/arm64: Fix topology initialization for core scheduling
arm64: mte: Fix the stack frame size warning in mte_dump_tag_range()
Revert "arm64: Change elfcore for_each_mte_vma() to use VMA iterator"
Merge tag 'folio-5.18e' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"Fewer bug reports than I was expecting from enabling large folios.
One that doesn't show up on x86 but does on arm64, one that shows up
with hugetlbfs memory failure testing and one that shows up with page
migration, which it turns out I wasn't testing because my last NUMA
machine died. Need to set up a qemu fake NUMA machine so I don't skip
testing that in future.
Summary:
- Remove the migration code's assumptions about large pages being PMD
sized
- Don't call pmd_page() on a non-leaf PMD
- Fix handling of hugetlbfs pages in page_vma_mapped_walk"
* tag 'folio-5.18e' of git://git.infradead.org/users/willy/pagecache:
mm/rmap: Fix handling of hugetlbfs pages in page_vma_mapped_walk
mm/mempolicy: Use vma_alloc_folio() in new_page()
mm: Add vma_alloc_folio()
mm/migrate: Use a folio in migrate_misplaced_transhuge_page()
mm/migrate: Use a folio in alloc_migration_target()
mm/huge_memory: Avoid calling pmd_page() on a non-leaf PMD
Merge tag 'spi-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that have arrived since the merge window,
the most noticable one is a fix for unmapping messages when the
mapping was done with the struct device supplied to do the mapping
overridden"
* tag 'spi-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()
spi: cadence-quadspi: fix protocol setup for non-1-1-X operations
spi: core: add dma_map_dev for __spi_unmap_msg()
spi: mxic: Fix an error handling path in mxic_spi_probe()
spi: rpc-if: Fix RPM imbalance in probe error path
Merge tag 'regulator-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few small driver specific fixes for v5.18, plus an update to the
MAINTAINERS file"
* tag 'regulator-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
MAINTAINERS: Fix reviewer info for a few ROHM ICs
regulator: atc260x: Fix missing active_discharge_on setting
regulator: rtq2134: Fix missing active_discharge_on setting
regulator: wm8994: Add an off-on delay for WM8994 variant
Merge tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve API to make it clear that mmc_hw_reset() is for cards
- Fixup support for writeback-cache for eMMC and SD
- Check for errors after writes on SPI
MMC host:
- renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
- mmci_stm32: Fixup check of all elements in sg list
- sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning"
* tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: improve API to make clear mmc_hw_reset is for cards
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
mmc: renesas_sdhi: special 4tap settings only apply to HS400
mmc: core: Fixup support for writeback-cache for eMMC and SD
mmc: block: Check for errors after write on SPI
mmc: mmci: stm32: correctly check all elements of sg list
Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
Merge tag 'iommu-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
- Fix boot regression due to a NULL-ptr dereference on OMAP machines
* tag 'iommu-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/omap: Fix regression in probe for NULL pointer dereference
perf/imx_ddr: Fix undefined behavior due to shift overflowing the constant
Fix:
In file included from <command-line>:0:0:
In function ‘ddr_perf_counter_enable’,
inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
...
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Frank Li <Frank.li@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de Signed-off-by: Will Deacon <will@kernel.org>
Matti Vaittinen [Fri, 8 Apr 2022 08:32:00 +0000 (11:32 +0300)]
MAINTAINERS: Fix reviewer info for a few ROHM ICs
The email backend used by ROHM keeps labeling patches as spam.
Additionally, there have been reports of some emails been completely
dropped. Finally also the email list (or shared inbox)
linux-power@fi.rohmeurope.com inadvertly stopped working and has not
been reviwed during the past few weeks.
Remove no longer working list 'linux-power' list-entry and switch my
email to use the personal gmail account instead of the company account.
arm64: patch_text: Fixup last cpu should be master
These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.
Tony Lindgren [Thu, 31 Mar 2022 06:23:01 +0000 (09:23 +0300)]
iommu/omap: Fix regression in probe for NULL pointer dereference
Commit 8bec16b5b7cf ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:
__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24
This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.
Looks like the regression already happened with an earlier commit 05ed123df0c9 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.
Cc: Drew Fustini <dfustini@baylibre.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Suman Anna <s-anna@ti.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Fixes: 05ed123df0c9 ("iommu/omap: Convert to probe/release_device() call-backs") Fixes: 8bec16b5b7cf ("iommu: Use right way to retrieve iommu_ops") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Drew Fustini <dfustini@baylibre.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Wolfram Sang [Fri, 8 Apr 2022 08:00:42 +0000 (10:00 +0200)]
mmc: core: improve API to make clear mmc_hw_reset is for cards
To make it unambiguous that mmc_hw_reset() is for cards and not for
controllers, we make the function argument mmc_card instead of mmc_host.
Also, all users are converted.
imx:
- Catch an EDID allocation failure in imx-ldb
- fix a leaked drm display mode on DT parsing error in parallel-display
- properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx
- fix the IPU clock frequency debug printout in ipu-di"
* tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm: (61 commits)
dt-bindings: display: panel: mipi-dbi-spi: Make width-mm/height-mm mandatory
fbdev: Fix unregistering of framebuffers without device
drm/amdgpu/smu10: fix SoC/fclk units in auto mode
drm/amd/display: update dcn315 clock table read
drm/amdgpu/display: change pipe policy for DCN 2.1
drm/amd/display: Add configuration options for AUX wake work around.
drm/amd/display: remove assert for odm transition case
drm/amdgpu: don't use BACO for reset in S3
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
drm/amdkfd: Create file descriptor after client is added to smi_clients list
drm/amdgpu: Sync up header and implementation to use the same parameter names
drm/amdgpu: fix incorrect GCR_GENERAL_CNTL address
amd/display: set backlight only if required
drm/amd/display: Fix allocate_mst_payload assert on resume
drm/amd/display: Revert FEC check in validation
drm/amd/display: Add work around for AUX failure on wake.
drm/amd/display: Clear optc false state when disable otg
drm/amd/display: Enable power gating before init_pipes
drm/amd/display: Remove redundant dsc power gating from init_hw
drm/amd/display: Correct Slice reset calculation
...
Merge tag '5.18-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
- reconnect fixes: one for DFS and one to avoid a reconnect race
- small change to deal with upcoming behavior change of list iterators
* tag '5.18-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: force new session setup and tcon for dfs
cifs: remove check of list iterator against head past the loop body
cifs: fix potential race with cifsd thread
- eth: ice:
- clear default forwarding VSI during VSI release
- fix broken IFF_ALLMULTI handling
- synchronize_rcu() when terminating rings
- eth: qede: confirm skb is allocated before using
- eth: aqc111: fix out-of-bounds accesses in RX fixup
- eth: slip: fix NPD bug in sl_tx_timeout()"
* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
drivers: net: slip: fix NPD bug in sl_tx_timeout()
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
qede: confirm skb is allocated before using
net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
net: phy: mscc-miim: reject clause 45 register accesses
net: axiemac: use a phandle to reference pcs_phy
dt-bindings: net: add pcs-handle attribute
net: axienet: factor out phy_node in struct axienet_local
net: axienet: setup mdio unconditionally
net: sfc: fix using uninitialized xdp tx_queue
rxrpc: fix a race in rxrpc_exit_net()
net: openvswitch: fix leak of nested actions
net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
net: openvswitch: don't send internal clone attribute to the userspace.
net: micrel: Fix KS8851 Kconfig
ice: clear cmd_type_offset_bsz for TX rings
ice: xsk: fix VSI state check in ice_xsk_wakeup()
...
Dave Airlie [Thu, 7 Apr 2022 23:22:07 +0000 (09:22 +1000)]
Merge tag 'drm-misc-fixes-2022-04-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.18-rc2:
- Fix a crash when booting with nouveau on tegra.
- Don't require input port for MIPI-DSI, and make width/height mandatory.
- Fix unregistering of framebuffers without device.
Dave Airlie [Thu, 7 Apr 2022 23:13:33 +0000 (09:13 +1000)]
Merge tag 'drm-misc-next-fixes-2022-04-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-next-fixes for v5.18-rc2:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
- Try all possible cases for bridge/panel detection.
SUNRPC: Move the call to xprt_send_pagedata() out of xprt_sock_sendmsg()
The client and server have different requirements for their memory
allocation, so move the allocation of the send buffer out of the socket
send code that is common to both.
Reported-by: NeilBrown <neilb@suse.de> Fixes: 44f8a86b5aa1 ("SUNRPC: Make the rpciod and xprtiod slab allocation modes consistent") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Muchun Song [Fri, 1 Apr 2022 02:59:05 +0000 (10:59 +0800)]
NFSv4.2: Fix missing removal of SLAB_ACCOUNT on kmem_cache allocation
The commit 173d3bcf42d6 ("NFSv4.2: Fix up an invalid combination of memory
allocation flags") has stripped GFP_KERNEL_ACCOUNT down to GFP_KERNEL,
however, it forgot to remove SLAB_ACCOUNT from kmem_cache allocation.
It means that memory is still limited by kmemcg. This patch also fix a
NULL pointer reference issue [1] reported by NeilBrown.
Link: https://lore.kernel.org/all/164870069595.25542.17292003658915487357@noble.neil.brown.name/ Fixes: 173d3bcf42d6 ("NFSv4.2: Fix up an invalid combination of memory allocation flags") Fixes: ee50c20a0c65 ("mm: list_lru: allocate list_lru_one only when needed") Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()
We must ensure that all sockets are closed before we call xprt_free()
and release the reference to the net namespace. The problem is that
calling fput() will defer closing the socket until delayed_fput() gets
called.
Let's fix the situation by allowing rpciod and the transport teardown
code (which runs on the system wq) to call __fput_sync(), and directly
close the socket.
Reported-by: Felix Fu <foyjog@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: 172771584d70 ("SUNRPC: Fix an Oops in udp_poll()") Cc: stable@vger.kernel.org # 5.1.x: eaed0dc920f0: SUNRPC: Prevent immediate close+reconnect Cc: stable@vger.kernel.org # 5.1.x: 7bb619385760: SUNRPC: Don't call connect() more than once on a TCP socket Cc: stable@vger.kernel.org # 5.1.x Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Trond Myklebust [Thu, 31 Mar 2022 00:00:07 +0000 (20:00 -0400)]
NFS: Replace readdir's use of xxhash() with hash_64()
Both xxhash() and hash_64() appear to give similarly low collision
rates with a standard linearly increasing readdir offset. They both give
similarly higher collision rates when applied to ext4's offsets.
Pavel Begunkov [Thu, 7 Apr 2022 13:05:04 +0000 (14:05 +0100)]
io_uring: zero tag on rsrc removal
Automatically default rsrc tag in io_queue_rsrc_removal(), it's safer
than leaving it there and relying on the rest of the code to behave and
not use it.
Pavel Begunkov [Wed, 6 Apr 2022 11:43:58 +0000 (12:43 +0100)]
io_uring: don't touch scm_fp_list after queueing skb
It's safer to not touch scm_fp_list after we queued an skb to which it
was assigned, there might be races lurking if we screw subtle sync
guarantees on the io_uring side.
Fixes: 0e7ec4deae003 ("io_uring: add file set registration") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 6 Apr 2022 11:43:57 +0000 (12:43 +0100)]
io_uring: nospec index for tags on files update
Don't forget to array_index_nospec() for indexes before updating rsrc
tags in __io_sqe_files_update(), just use already safe and precalculated
index @i.
Fixes: 3472b362d1257 ("io_uring: add generic rsrc update with tags") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's some discussion on the API not being as good as it can be.
Rather than ship something and be stuck with it forever, let's revert
the NAPI support for now and work on getting something sorted out
for the next kernel release instead.
Jens Axboe [Thu, 31 Mar 2022 18:38:46 +0000 (12:38 -0600)]
io_uring: drop the old style inflight file tracking
io_uring tracks requests that are referencing an io_uring descriptor to
be able to cancel without worrying about loops in the references. Since
we now assign the file at execution time, the easier approach is to drop
a potentially problematic reference before we punt the request. This
eliminates the need to special case these types of files beyond just
marking them as such, and simplifies cancelation quite a bit.
This also fixes a recent issue where an async punted tee operation would
with the io_uring descriptor as the output file would crash when
attempting to get a reference to the file from the io-wq worker. We
could have worked around that, but this is the much cleaner fix.
Jens Axboe [Tue, 29 Mar 2022 16:10:08 +0000 (10:10 -0600)]
io_uring: defer file assignment
If an application uses direct open or accept, it knows in advance what
direct descriptor value it will get as it picks it itself. This allows
combined requests such as:
where we prepare both a file open and read, and only get a completion
event for the read when both have completed successfully.
Currently links are fully prepared before the head is issued, but that
fails if the dependent link needs a file assigned that isn't valid until
the head has completed.
Conversely, if the same chain is performed but the fixed file slot is
already valid, then we would be unexpectedly returning data from the
old file slot rather than the newly opened one. Make sure we're
consistent here.
Allow deferral of file setup, which makes this documented case work.
io_uring: propagate issue_flags state down to file assignment
We'll need this in a future patch, when we could be assigning the file
after the prep stage. While at it, get rid of the io_file_get() helper,
it just makes the code harder to read.
- Deactivate sysctl_record_panic_msg on isolated guest (Andrea Parri)
- Fix a crash when unloading VMbus module (Guilherme G. Piccoli)
* tag 'hyperv-fixes-signed-20220407' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()
Drivers: hv: balloon: Disable balloon and hot-add accordingly
Drivers: hv: balloon: Support status report for larger page sizes
Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
PCI: hv: Propagate coherence from VMbus device to PCI device
Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus device
Drivers: hv: vmbus: Fix potential crash on module unload
Drivers: hv: vmbus: Fix initialization of device object in vmbus_device_register()
Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests
Merge tag 'random-5.18-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- Another fixup to the fast_init/crng_init split, this time in how much
entropy is being credited, from Jan Varho.
- As discussed, we now opportunistically call try_to_generate_entropy()
in /dev/urandom reads, as a replacement for the reverted commit. I
opted to not do the more invasive wait_for_random_bytes() change at
least for now, preferring to do something smaller and more obvious
for the time being, but maybe that can be revisited as things evolve
later.
- Userspace can use FUSE or userfaultfd or simply move a process to
idle priority in order to make a read from the random device never
complete, which breaks forward secrecy, fixed by overwriting
sensitive bytes early on in the function.
- Jann Horn noticed that /dev/urandom reads were only checking for
pending signals if need_resched() was true, a bug going back to the
genesis commit, now fixed by always checking for signal_pending() and
calling cond_resched(). This explains various noticeable signal
delivery delays I've seen in programs over the years that do long
reads from /dev/urandom.
- In order to be more like other devices (e.g. /dev/zero) and to
mitigate the impact of fixing the above bug, which has been around
forever (users have never really needed to check the return value of
read() for medium-sized reads and so perhaps many didn't), we now
move signal checking to the bottom part of the loop, and do so every
PAGE_SIZE-bytes.
* tag 'random-5.18-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: check for signals every PAGE_SIZE chunk of /dev/[u]random
random: check for signal_pending() outside of need_resched() check
random: do not allow user to keep crng key around on stack
random: opportunistically initialize on /dev/urandom reads
random: do not split fast init input in add_hwgenerator_randomness()
Merge tag 'ata-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix a compilation warning due to an uninitialized variable in
ata_sff_lost_interrupt(), from me.
- Fix invalid internal command tag handling in the sata_dwc_460ex
driver, from Christian.
- Disable READ LOG DMA EXT with Samsung 840 EVO SSDs as this command
causes the drives to hang, from Christian.
- Change the config option CONFIG_SATA_LPM_POLICY back to its original
name CONFIG_SATA_LPM_MOBILE_POLICY to avoid potential problems with
users losing their configuration (as discussed during the merge
window), from Mario.
* tag 'ata-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back
ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
ata: sata_dwc_460ex: Fix crash due to OOB write
ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()
zhenwei pi [Thu, 7 Apr 2022 06:40:08 +0000 (14:40 +0800)]
mm/rmap: Fix handling of hugetlbfs pages in page_vma_mapped_walk
page_mapped_in_vma() sets nr_pages to 1, which is usually correct as we
only want to know about the precise page and not about other pages in
the folio. However, hugetlbfs does want to know about the entire hpage,
and using nr_pages to get the size of the hpage is wrong. We could
change page_mapped_in_vma() to special-case hugetlbfs pages, but it's
better to ignore nr_pages in page_vma_mapped_walk() and get the size
from the VMA instead.
Fixes: 54f1b5f5fe74c ("mm: Convert page_vma_mapped_walk to work on PFNs") Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[edit commit message, use hstate directly]
Simplify new_page() by unifying the THP and base page cases, and
handle orders other than 0 and HPAGE_PMD_ORDER correctly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
This wrapper around alloc_pages_vma() calls prep_transhuge_page(),
removing the obligation from the caller. This is in the same spirit
as __folio_alloc().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
mm/migrate: Use a folio in migrate_misplaced_transhuge_page()
Unify alloc_misplaced_dst_page() and alloc_misplaced_dst_page_thp().
Removes an assumption that compound pages are HPAGE_PMD_ORDER.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
mm/migrate: Use a folio in alloc_migration_target()
This removes an assumption that a large folio is HPAGE_PMD_ORDER
as well as letting us remove the call to prep_transhuge_page()
and a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com>
mm/huge_memory: Avoid calling pmd_page() on a non-leaf PMD
Calling try_to_unmap() with TTU_SPLIT_HUGE_PMD and a folio that's not
mapped by a PMD causes oopses on arm64 because we now call page_folio()
on an invalid page. pmd_page() returns a valid page for non-leaf PMDs on
some architectures, so this bug escaped testing before now. Fix this bug
by delaying the call to pmd_page() until after we know the PMD is a leaf.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215804 Fixes: 814b1b1da664 ("mm/huge_memory: Convert __split_huge_pmd() to take a folio") Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Zorro Lang <zlang@redhat.com>
Wolfram Sang [Mon, 4 Apr 2022 11:49:02 +0000 (13:49 +0200)]
mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.
drivers: net: slip: fix NPD bug in sl_tx_timeout()
When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.
We've added 8 non-merge commits during the last 8 day(s) which contain
a total of 9 files changed, 139 insertions(+), 36 deletions(-).
The main changes are:
1) rethook related fixes, from Jiri and Masami.
2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin.
3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
bpf: selftests: Test fentry tracing a struct_ops program
bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
rethook: Fix to use WRITE_ONCE() for rethook:: Handler
selftests/bpf: Fix warning comparing pointer to 0
bpf: Fix sparse warnings in kprobe_multi_resolve_syms
bpftool: Explicit errno handling in skeletons
====================
Dave Airlie [Thu, 7 Apr 2022 00:23:03 +0000 (10:23 +1000)]
Merge tag 'imx-drm-fixes-2022-04-06' of git://git.pengutronix.de/pza/linux into drm-fixes
drm/imx: error handling and debug output fixes
Catch an EDID allocation failure in imx-ldb, fix a leaked drm display
mode on DT parsing error in parallel-display, properly remove the
dw_hdmi bridge in case the component_add fails in dw_hdmi-imx, and
fix the IPU clock frequency debug printout in ipu-di.
random: check for signals every PAGE_SIZE chunk of /dev/[u]random
In d5e6e5d31c6a ("random: check for signal_pending() outside of
need_resched() check"), Jann pointed out that we previously were only
checking the TIF_NOTIFY_SIGNAL and TIF_SIGPENDING flags if the process
had TIF_NEED_RESCHED set, which meant in practice, super long reads to
/dev/[u]random would delay signal handling by a long time. I tried this
using the below program, and indeed I wasn't able to interrupt a
/dev/urandom read until after several megabytes had been read. The bug
he fixed has always been there, and so code that reads from /dev/urandom
without checking the return value of read() has mostly worked for a long
time, for most sizes, not just for <= 256.
Maybe it makes sense to keep that code working. The reason it was so
small prior, ignoring the fact that it didn't work anyway, was likely
because /dev/random used to block, and that could happen for pretty
large lengths of time while entropy was gathered. But now, it's just a
chacha20 call, which is extremely fast and is just operating on pure
data, without having to wait for some external event. In that sense,
/dev/[u]random is a lot more like /dev/zero.
Taking a page out of /dev/zero's read_zero() function, it always returns
at least one chunk, and then checks for signals after each chunk. Chunk
sizes there are of length PAGE_SIZE. Let's just copy the same thing for
/dev/[u]random, and check for signals and cond_resched() for every
PAGE_SIZE amount of data. This makes the behavior more consistent with
expectations, and should mitigate the impact of Jann's fix for the
age-old signal check bug.
fbdev: Fix unregistering of framebuffers without device
OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.
The bug [1] was introduced by commit 889ae79e9a8c ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.
Tested with 5.17 on qemu ppc64le emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 889ae79e9a8c ("fbdev: Hot-unplug firmware fb devices on forced removal") Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Zack Rusin <zackr@vmware.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org # v5.11+ Cc: Helge Deller <deller@gmx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Zheyu Ma <zheyuma97@gmail.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/ Link: https://patchwork.freedesktop.org/patch/msgid/20220404194402.29974-1-tzimmermann@suse.de
drbd: fix an invalid memory access caused by incorrect use of list iterator
The bug is here:
idr_remove(&connection->peer_devices, vnr);
If the previous for_each_connection() don't exit early (no goto hit
inside the loop), the iterator 'connection' after the loop will be a
bogus pointer to an invalid structure object containing the HEAD
(&resource->connections). As a result, the use of 'connection' above
will lead to a invalid memory access (including a possible invalid free
as idr_remove could call free_layer).
The original intention should have been to remove all peer_devices,
but the following lines have already done the work. So just remove
this line and the unneeded label, to fix this bug.
Cc: stable@vger.kernel.org Fixes: 61c4103b3b7d8 ("drbd: Turn connection->volumes into connection->peer_devices") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
drbd: Fix five use after free bugs in get_initial_state
In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.
What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.
My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.
v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/
Fixes: 3160bb81f6bc4 ("drbd: Backport the "events2" command") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
The previous commit fixed support for dual-stack sockets in
bpf_tcp_check_syncookie. This commit adjusts the selftest to verify the
fixed functionality.
bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
bpf_tcp_gen_syncookie looks at the IP version in the IP header and
validates the address family of the socket. It supports IPv4 packets in
AF_INET6 dual-stack sockets.
On the other hand, bpf_tcp_check_syncookie looks only at the address
family of the socket, ignoring the real IP version in headers, and
validates only the packet size. This implementation has some drawbacks:
1. Packets are not validated properly, allowing a BPF program to trick
bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4
socket.
2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end
up receiving a SYNACK with the cookie, but the following ACK gets
dropped.
This patch fixes these issues by changing the checks in
bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP
version from the header is taken into account, and it is validated
properly with address family.
Fixes: a02ecae654cb ("bpf: add helper to check for a valid SYN cookie") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Arthur Fabre <afabre@cloudflare.com> Link: https://lore.kernel.org/bpf/20220406124113.2795730-1-maximmi@nvidia.com
Alex Deucher [Fri, 1 Apr 2022 15:08:48 +0000 (11:08 -0400)]
drm/amdgpu/smu10: fix SoC/fclk units in auto mode
SMU takes clock limits in Mhz units. socclk and fclk were
using 10 khz units in some cases. Switch to Mhz units.
Fixes higher than required SoC clocks.
Fixes: f93986928e6dd5 ("drm/amd/pm: Removed fixed clock in auto mode DPM") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Jimmy Kizito [Tue, 22 Mar 2022 23:12:47 +0000 (19:12 -0400)]
drm/amd/display: Add configuration options for AUX wake work around.
[Why]
Work around to try to wake unresponsive DP sinks may need to be adjusted
for certain sinks.
[How]
Add options to disable work around or adjust time spent trying to wake
unresponsive DPRX.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Mon, 21 Mar 2022 14:42:34 +0000 (10:42 -0400)]
drm/amd/display: remove assert for odm transition case
Remove assert that will hit during odm transition case,
since this is a valid case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.
[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.
Ma Jun [Wed, 23 Mar 2022 13:16:19 +0000 (21:16 +0800)]
drm/amdgpu: Sync up header and implementation to use the same parameter names
Sync up header and implementation to use the same parameter names
in function amdgpu_ring_init.
ring_size -> max_dw, prio -> hw_prio
Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Fri, 11 Mar 2022 15:00:17 +0000 (20:30 +0530)]
amd/display: set backlight only if required
[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:
"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"
[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Roman Li [Thu, 17 Mar 2022 23:55:05 +0000 (19:55 -0400)]
drm/amd/display: Fix allocate_mst_payload assert on resume
[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()
[How]
Use link type as indicator for mst link.
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 18 Mar 2022 15:12:36 +0000 (11:12 -0400)]
drm/amd/display: Revert FEC check in validation
why and how:
causes failure on install on certain machines
Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jimmy Kizito [Wed, 9 Mar 2022 23:26:47 +0000 (18:26 -0500)]
drm/amd/display: Add work around for AUX failure on wake.
[Why]
When waking from low-power states, a DP sink may remain unresponsive to
AUX transactions.
[How]
Try to toggle DPCD SET_POWER register repeatedly (up to a maximum
timeout value) until DP sink becomes responsive.
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 15 Mar 2022 20:42:33 +0000 (16:42 -0400)]
drm/amd/display: Clear optc false state when disable otg
[why]
when disable optc, need to clear the underflow status as well.
Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 15 Mar 2022 20:31:14 +0000 (16:31 -0400)]
drm/amd/display: Enable power gating before init_pipes
[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"
[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 15 Mar 2022 18:57:34 +0000 (14:57 -0400)]
drm/amd/display: Remove redundant dsc power gating from init_hw
[Why]
DSC Power down code has been moved from dcn31_init_hw into init_pipes()
Need to remove it from dcn10_init_hw() as well to avoid duplicated action
on dcn1.x/2.x
[How]
Remove DSC power down code from dcn10_init_hw()
Fixes: ffb02faec09b ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / kernel.git / log