Thomas Gleixner [Sun, 21 Jun 2015 14:21:50 +0000 (16:21 +0200)]
x86/hpet: Use proper hpet device number for MSI allocation
hpet_assign_irq() is called with hpet_device->num as "hardware
interrupt number", but hpet_device->num is initialized after the
interrupt has been assigned, so it's always 0. As a consequence only
the first MSI allocation succeeds, the following ones fail because the
"hardware interrupt number" already exists.
Move the initialization of dev->num and other fields before the call
to hpet_assign_irq(), which is the ordering before the offending
commit which introduced that regression.
Fixes: "32b410438a63 x86/hpet: Enhance HPET IRQ to support hierarchical irqdomains" Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1506211635010.4107@nanos Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de>
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
We are burrying direct access to MTRR code support on
x86 in order to take advantage of PAT. In the future, we
also want to make the default behaviour of ioremap_nocache()
to use strong UC, use of mtrr_add() on those systems
would make write-combining void.
In order to help both enable us to later make strong
UC default and in order to phase out direct MTRR access
code port the driver over to arch_phys_wc_add() and
annotate that the device driver requires systems to
boot with PAT disabled, with the 'nopat' kernel parameter.
This is a workable compromise given that the ipath device
driver powers the old HTX bus cards that only work in
AMD systems, while the newer IB/qib device driver
powers all PCI-e cards. The ipath device driver is
obsolete, hardware is hard to find and because of this
its a reasonable compromise to require users of ipath
to boot with 'nopat'.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Doug Ledford <dledford@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Ville Syrjälä <syrjala@sci.fi> Cc: infinipath@intel.com Cc: jbeulich@suse.com Cc: konrad.wilk@oracle.com Cc: linux-rdma@vger.kernel.org Cc: mchehab@osg.samsung.com Cc: toshi.kani@hp.com Link: http://lkml.kernel.org/r/1434053994-2196-4-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1434356898-25135-5-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
We are burrying direct access to MTRR code support on
x86 in order to take advantage of PAT. In the future, we
also want to make the default behavior of ioremap_nocache()
to use strong UC, at which point the use of mtrr_add() on
those systems would make write-combining void.
In order to help both enable us to later make strong
UC default and in order to phase out direct MTRR access
code, port the driver over to the arch_phys_wc_add() API
and annotate that the device driver requires systems to
boot with PAT disabled, with the 'nopat' kernel parameter.
This is a workable compromise given that the hardware is
really rare these days, and perhaps only some lost souls
stuck with obsolete hardware are expected to be using this
feature of the device driver.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ville Syrjälä <syrjala@sci.fi> Cc: bhelgaas@google.com Cc: konrad.wilk@oracle.com Cc: linux-media@vger.kernel.org Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Link: http://lkml.kernel.org/r/1434053994-2196-2-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Feng Tang [Mon, 15 Jun 2015 09:40:01 +0000 (17:40 +0800)]
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
This question has been asked many times, and finally I found the
official document which explains the problem of HPET on Baytrail,
that it will halt in deep idle states.
Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john.stultz@linaro.org Cc: len.brown@intel.com Cc: matthew.lee@intel.com Link: http://lkml.kernel.org/r/1434361201-31743-1-git-send-email-feng.tang@intel.com
[ Prettified things a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiang Liu [Mon, 1 Jun 2015 08:05:11 +0000 (16:05 +0800)]
genirq: Prevent crash in irq_move_irq()
The functions irq_move_irq() and irq_move_masked_irq() expect that the
caller passes the top-level irq_data to them when hierarchical
irqdomains are enabled. But that's not true when called from
apic_ack_edge(), which results in a null pointer dereference by
idata->chip->irq_mask(idata).
Instead of fixing callers to passing top-level irq_data, we rather
change irq_move_irq()/irq_move_masked_irq() to accept any irq_data.
Fixes: 4bfdc0ed8f4 'x86/MSI: Use hierarchical irqdomains to manage MSI interrupts' Reported-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1433145945-789-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jiang Liu [Mon, 1 Jun 2015 08:05:10 +0000 (16:05 +0800)]
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
For irq associated with hierarchy irqdomains, there will be multiple
irq_datas for one irq_desc. So enhance irq_data_to_desc() to support
hierarchy irqdomain. Also export irq_data_to_desc() as an inline
function for later reuse.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-2-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the interrupt is configured in posted mode, the destination of
the interrupt is set in the Posted-Interrupts Descriptor and the
migration of these interrupts happens during vCPU scheduling.
We still update the cached irte, which will be used when changing back
to remapping mode, but we avoid writing the table entry as this would
overwrite the posted mode entry.
Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-7-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Feng Wu [Tue, 9 Jun 2015 05:20:32 +0000 (13:20 +0800)]
iommu, x86: Save the mode (posted or remapped) of an IRTE
Add a new field to struct irq_2_iommu, which captures whether the
associated IRTE is in posted mode or remapped mode. We update this
field when the IRTE is written into the table.
Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-6-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Tue, 9 Jun 2015 05:20:29 +0000 (13:20 +0800)]
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
The IRTE (Interrupt Remapping Table Entry) is either an entry for
remapped or for posted interrupts. The hardware distiguishes between
remapped and posted entries by bit 15 in the low 64 bit of the
IRTE. If cleared the entry is remapped, if set it's posted.
The entries have common fields and dependent on the posted bit fields
with different meanings.
Extend struct irte to handle the differences between remap and posted
mode by having three structs in the unions:
The error_entry/error_exit code to handle gsbase and whether we
return to user mdoe was a mess:
- error_sti was misnamed. In particular, it did not enable interrupts.
- Error handling for gs_change was hopelessly tangled the normal
usermode path. Separate it out. This saves a branch in normal
entries from kernel mode.
- The comments were bad.
Fix it up. As a nice side effect, there's now a code path that
happens on error entries from user mode. We'll use it soon.
Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/f1be898ab93360169fb845ab85185948832209ee.1433878454.git.luto@kernel.org
[ Prettified it, clarified comments some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
Denys Vlasenko [Tue, 9 Jun 2015 18:54:08 +0000 (20:54 +0200)]
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
Here it is not obvious why we load pt_regs->cx to %esi etc.
Lets improve comments.
Explain that here we combine two things: first, we reload
registers since some of them are clobbered by the C function we
just called; and we also convert 32-bit syscall params to 64-bit
C ABI, because we are going to jump back to syscall dispatch
code.
Move reloading of 6th argument into the macro instead of having
it after each of two macro invocations.
No actual code changes here.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433876051-26604-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 8 Jun 2015 19:20:26 +0000 (21:20 +0200)]
x86/asm/entry: (Re-)rename __NR_entry_INT80_compat_max to __NR_syscall_compat_max
Brian Gerst noticed that I did a weird rename in the following commit:
6da034e4fb42 ("x86/asm/entry: Untangle 'system_call' into two entry points: entry_SYSCALL_64 and entry_INT80_32")
which renamed __NR_ia32_syscall_max to __NR_entry_INT80_compat_max.
Now the original name was a misnomer, but the new one is a misnomer as well,
as all the 32-bit compat syscall entry points (sysenter, syscall) share the
system call table, not just the INT80 based one.
Rename it to __NR_syscall_compat_max.
Reported-by: Brian Gerst <brgerst@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Denys Vlasenko [Sun, 7 Jun 2015 18:24:30 +0000 (20:24 +0200)]
x86/asm/entry/32: Reinstate clearing of pt_regs->r8..r11 on EFAULT path
I broke this recently when I changed pt_regs->r8..r11 clearing
logic in INT 80 code path.
There is a branch from SYSENTER/SYSCALL code to INT 80 code:
if we fail to retrieve arg6, we return EFAULT. Before this
patch, in this case we don't clear pt_regs->r8..r11.
This patch fixes this. The resulting code is smaller and
simpler.
While at it, remove incorrect comment about syscall dispatching
CALL insn: it does not use RIP-relative addressing form (the
comment was meant to be "TODO: make this rip-relative", and
morphed since then, dropping "TODO").
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433701470-28800-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 8 Jun 2015 06:42:03 +0000 (08:42 +0200)]
x86/asm/entry: Untangle 'system_call' into two entry points: entry_SYSCALL_64 and entry_INT80_32
The 'system_call' entry points differ starkly between native 32-bit and 64-bit
kernels: on 32-bit kernels it defines the INT 0x80 entry point, while on
64-bit it's the SYSCALL entry point.
This is pretty confusing when looking at generic code, and it also obscures
the nature of the entry point at the assembly level.
So unangle this by splitting the name into its two uses:
Borislav Petkov [Thu, 4 Jun 2015 16:55:26 +0000 (18:55 +0200)]
x86/uapi: Do not export <asm/msr-index.h> as part of the user API headers
This header containing all MSRs and respective bit definitions
got exported to userspace in conjunction with the big UAPI
shuffle.
But, it doesn't belong in the UAPI headers because userspace can
do its own MSR defines and exporting them from the kernel blocks
us from doing cleanups/renames in that header. Which is
ridiculous - it is not kernel's job to export such a header and
keep MSRs list and their names stable.
Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1433436928-31903-19-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Thu, 4 Jun 2015 16:55:25 +0000 (18:55 +0200)]
x86: Kill CONFIG_X86_HT
In talking to Aravind recently about making certain AMD topology
attributes available to the MCE injection module, it seemed like
that CONFIG_X86_HT thing is more or less superfluous. It is
def_bool y, depends on SMP and gets enabled in the majority of
.configs - distro and otherwise - out there.
So let's kill it and make code behind it depend directly on SMP.
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Daniel Walter <dwalter@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jacob Shin <jacob.w.shin@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1433436928-31903-18-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ashok Raj [Thu, 4 Jun 2015 16:55:24 +0000 (18:55 +0200)]
x86/mce: Handle Local MCE events
Add the necessary changes to do_machine_check() to be able to
process MCEs signaled as local MCEs. Typically, only recoverable
errors (SRAR type) will be Signaled as LMCE. The architecture
does not restrict to only those errors, however.
When errors are signaled as LMCE, there is no need for the MCE
handler to perform rendezvous with other logical processors
unlike earlier processors that would broadcast machine check
errors.
Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1433436928-31903-17-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ashok Raj [Thu, 4 Jun 2015 16:55:22 +0000 (18:55 +0200)]
x86/mce: Add Local MCE definitions
Add required definitions to support Local Machine Check
Exceptions.
Historically, machine check exceptions on Intel x86 processors
have been broadcast to all logical processors in the system.
Upcoming CPUs will support an opt-in mechanism to request some
machine check exceptions be delivered to a single logical
processor experiencing the fault.
See http://www.intel.com/sdm Volume 3, System Programming Guide,
chapter 15 for more information on MSRs and documentation on
Local MCE.
Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1433436928-31903-15-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:21 +0000 (18:55 +0200)]
drivers/block/pmem: Map NVDIMM in Write-Through mode
The pmem driver maps NVDIMM uncacheable so that we don't lose
data which hasn't reached non-volatile storage in the case of a
crash. Change this to Write-Through mode which provides uncached
writes but cached reads, thus improving read performance.
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-14-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:20 +0000 (18:55 +0200)]
x86/mm/pat: Add set_memory_wt() for Write-Through type
Now that reserve_ram_pages_type() accepts the WT type, add
set_memory_wt(), set_memory_array_wt() and set_pages_array_wt()
in order to be able to set memory to Write-Through page cache
mode.
Also, extend ioremap_change_attr() to accept the WT type.
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:19 +0000 (18:55 +0200)]
x86/mm/pat: Extend set_page_memtype() to support Write-Through type
As set_memory_wb() calls free_ram_pages_type(), which then calls
set_page_memtype() with -1, _PGMT_DEFAULT is used for tracking
the WB type. _PGMT_WB is defined but unused. Thus, rename
_PGMT_DEFAULT to _PGMT_WB to clarify the usage, and release the
slot used by _PGMT_WB.
Furthermore, change free_ram_pages_type() to call
set_page_memtype() with _PGMT_WB, and get_page_memtype() to
return _PAGE_CACHE_MODE_WB for _PGMT_WB.
Then, define _PGMT_WT in the freed slot. This allows
set_page_memtype() to track the WT type.
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-12-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:16 +0000 (18:55 +0200)]
arch/*/io.h: Add ioremap_wt() to all architectures
Add ioremap_wt() to all arch-specific asm/io.h headers which
define ioremap_wc() locally. These headers do not include
<asm-generic/iomap.h>. Some of them include <asm-generic/io.h>,
but ioremap_wt() is defined for consistency since they define
all ioremap_xxx locally.
In all architectures without Write-Through support, ioremap_wt()
is defined indentical to ioremap_nocache().
frv and m68k already have ioremap_writethrough(). On those we
add ioremap_wt() indetical to ioremap_writethrough() and defines
ARCH_HAS_IOREMAP_WT in both architectures.
The ioremap_wt() interface is exported to drivers.
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-9-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:15 +0000 (18:55 +0200)]
x86/mm, asm-generic: Add ioremap_wt() for creating Write-Through mappings
Add ioremap_wt() for creating Write-Through mappings on x86. It
follows the same model as ioremap_wc() for multi-arch support.
Define ARCH_HAS_IOREMAP_WT in the x86 version of io.h to
indicate that ioremap_wt() is implemented on x86.
Also update the PAT documentation file to cover ioremap_wt().
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:14 +0000 (18:55 +0200)]
x86/mm: Teach is_new_memtype_allowed() about Write-Through type
__ioremap_caller() calls reserve_memtype() and the passed down
@new_pcm contains the actual page cache type it reserved in the
success case.
is_new_memtype_allowed() verifies if converting to the new page
cache type is allowed when @pcm (the requested type) is
different from @new_pcm.
When WT is requested, the caller expects that writes are ordered
and uncached. Therefore, enhance is_new_memtype_allowed() to
disallow the following cases:
- If the request is WT, mapping type cannot be WB
- If the request is WT, mapping type cannot be WC
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-7-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:13 +0000 (18:55 +0200)]
x86/mm/pat: Change reserve_memtype() for Write-Through type
When a target range is in RAM, reserve_ram_pages_type() verifies
the requested type. Change it to fail WT and WP requests with
-EINVAL since set_page_memtype() is limited to handle three
types: WB, WC and UC-.
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: http://lkml.kernel.org/r/1433436928-31903-6-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Toshi Kani [Thu, 4 Jun 2015 16:55:12 +0000 (18:55 +0200)]
x86/mm/pat: Use 7th PAT MSR slot for Write-Through PAT type
Assign Write-Through type to the PA7 slot in the PAT MSR when
the processor is not affected by PAT errata. The PA7 slot is
chosen to improve robustness in the presence of errata that
might cause the high PAT bit to be ignored. This way a buggy PA7
slot access will hit the PA3 slot, which is UC, so at worst we
lose performance without causing a correctness issue.
The following Intel processors are affected by the PAT errata.
Errata CPUID
----------------------------------------------------
Pentium 2, A52 family 0x6, model 0x5
Pentium 3, E27 family 0x6, model 0x7, 0x8
Pentium 3 Xenon, G26 family 0x6, model 0x7, 0x8, 0xa
Pentium M, Y26 family 0x6, model 0x9
Pentium M 90nm, X9 family 0x6, model 0xd
Pentium 4, N46 family 0xf, model 0x0
Instead of making sharp boundary checks, we remain conservative
and exclude all Pentium 2, 3, M and 4 family processors. For
those, _PAGE_CACHE_MODE_WT is redirected to UC- per the default
setup in __cachemode2pte_tbl[].
Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: konrad.wilk@oracle.com Cc: linux-mm <linux-mm@kvack.org> Cc: linux-nvdimm@lists.01.org Cc: stefan.bader@canonical.com Cc: yigal@plexistor.com Link: https://lkml.kernel.org/r/1433187393-22688-2-git-send-email-toshi.kani@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Denys Vlasenko [Wed, 3 Jun 2015 13:58:50 +0000 (15:58 +0200)]
x86/asm/entry/32: Remove unnecessary optimization in stub32_clone
Really swap arguments #4 and #5 in stub32_clone instead of
"optimizing" it into a move.
Yes, tls_val is currently unused. Yes, on some CPUs XCHG is a
little bit more expensive than MOV. But a cycle or two on an
expensive syscall like clone() is way below noise floor, and
this optimization is simply not worth the obfuscation of logic.
[ There's also ongoing work on the clone() ABI by Josh Triplett
that will depend on this change later on. ]
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433339930-20880-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sysenter code loads 0(%ebp) to %ebp right away.
(This destroys %ebp. It means we do not preserve it on return.
It's not causing problems since userspace VDSO code does not
depend on it, and SYSENTER insn can't be sanely used outside of
VDSO).
Syscall code loads 0(%ebp) to %r9. This allows to eliminate one
MOV insn (r9 is a register where arg6 should be for 64-bit ABI),
but on audit/ptrace code paths this requires juggling of r9 and
ebp: (1) ptrace expects arg6 to be in pt_regs->bp;
(2) r9 is callee-clobbered register and needs to be
saved/restored around calls to C functions.
This patch changes syscall code to load 0(%ebp) to %ebp, making
it more similar to sysenter code. It's a bit smaller:
text data bss dec hex filename
1407 0 0 1407 57f ia32entry.o.before
1391 0 0 1391 56f ia32entry.o
To preserve ABI compat, we restore ebp on exit.
Run-tested.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433336169-18964-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Denys Vlasenko [Tue, 2 Jun 2015 17:35:10 +0000 (19:35 +0200)]
x86/asm/entry/32: Simplify the zeroing of pt_regs->r8..r11 in the int80 code path
32-bit syscall entry points do not save the complete pt_regs struct,
they leave some fields uninitialized. However, they must be
careful to not leak uninitialized data in pt_regs->r8..r11 to
ptrace users.
CLEAR_RREGS macro is used to zero these fields out when needed.
However, in the int80 code path this zeroing is unconditional.
This patch simplifies it by storing zeroes there right away,
when pt_regs is constructed on stack.
This uses shorter instructions:
text data bss dec hex filename
1423 0 0 1423 58f ia32entry.o.before
1407 0 0 1407 57f ia32entry.o
Compile-tested.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Link: http://lkml.kernel.org/r/1433266510-2938-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Fri, 5 Jun 2015 00:13:44 +0000 (17:13 -0700)]
x86/asm/msr: Make wrmsrl_safe() a function
The wrmsrl_safe macro performs invalid shifts if the value
argument is 32 bits. This makes it unnecessarily awkward to
write code that puts an unsigned long into an MSR.
Ingo Molnar [Wed, 3 Jun 2015 16:10:43 +0000 (18:10 +0200)]
x86/asm/entry: Move the 'thunk' functions to arch/x86/entry/
These are all calling x86 entry code functions, so move them close
to other entry code.
Change lib-y to obj-y: there's no real difference between the two
as we don't really drop any of them during the linking stage, and
obj-y is the more common approach for core kernel object code.
Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so
remove it from there and fix up the resulting build problems
triggered on x86 {64|32}-bit {def|allmod|allno}configs.
The breakages were triggering in places where x86 builds relied
on vmalloc() facilities but did not include <linux/vmalloc.h>
explicitly and relied on the implicit inclusion via <asm/io.h>.
Also add:
- <linux/init.h> to <linux/io.h>
- <asm/pgtable_types> to <asm/io.h>
... which were two other implicit header file dependencies.
Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[ Tidied up the changelog. ] Acked-by: David Miller <davem@davemloft.net> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Colin Cross <ccross@android.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: James E.J. Bottomley <JBottomley@odin.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Kristen Carlson Accardi <kristen@linux.intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Suma Ramars <sramars@cisco.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijstra noticed that in arch/x86/Kconfig there are a lot
of X86_{32,64} clauses in the X86 symbol, plus there are a number
of similar selects in the X86_32 and X86_64 config definitions
as well - which all overlap in an inconsistent mess.
So:
- move all select's from X86_32 and X86_64 to the X64 config
option
- sort their names, so that duplications are easier to spot
- align their if clauses, so that they are easier to identify
at a glance - and so that weirdnesses stand out more
No change in functionality:
105 insertions(+)
105 deletions(-)
Originally-from: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150602153027.GU3644@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Tue, 2 Jun 2015 13:38:27 +0000 (15:38 +0200)]
lockdep: Do not break user-visible string
Remove the line-break in the user-visible string and add the
missing space in this error message:
WARNING: lockdep init error! lock-(console_sem).lock was acquiredbefore lockdep_init
Also:
- don't yell, it's just a debug warning
- denote references to function calls with '()'
- standardize the lock name quoting
- and finish the sentence.
The result:
WARNING: lockdep init error: lock '(console_sem).lock' was acquired before lockdep_init().
Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150602133827.GD19887@pd.tnic
[ Added a few more stylistic tweaks to the error message. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jan Beulich [Mon, 1 Jun 2015 12:03:59 +0000 (13:03 +0100)]
x86/asm/entry/64: Fold identical code paths
retint_kernel doesn't require %rcx to be pointing to thread info
(anymore?), and the code on the two alternative paths is - not
really surprisingly - identical.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/556C664F020000780007FB64@mail.emea.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the dwarf2 annotations in low level assembly code have
become an increasing hindrance: unreadable, messy macros
mixed into some of the most security sensitive code paths
of the Linux kernel.
These debug info annotations don't even buy the upstream
kernel anything: dwarf driven stack unwinding has caused
problems in the past so it's out of tree, and the upstream
kernel only uses the much more robust framepointers based
stack unwinding method.
In addition to that there's a steady, slow bitrot going
on with these annotations, requiring frequent fixups.
There's no tooling and no functionality upstream that
keeps it correct.
So burn down the sick forest, allowing new, healthier growth:
Someone who has the willingness and time to do this
properly can attempt to reintroduce dwarf debuginfo in x86
assembly code plus dwarf unwinding from first principles,
with the following conditions:
- it should be maximally readable, and maximally low-key to
'ordinary' code reading and maintenance.
- find a build time method to insert dwarf annotations
automatically in the most common cases, for pop/push
instructions that manipulate the stack pointer. This could
be done for example via a preprocessing step that just
looks for common patterns - plus special annotations for
the few cases where we want to depart from the default.
We have hundreds of CFI annotations, so automating most of
that makes sense.
- it should come with build tooling checks that ensure that
CFI annotations are sensible. We've seen such efforts from
the framepointer side, and there's no reason it couldn't be
done on the dwarf side.
Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander
Duyck and Steffen Klassert.
2) Revert ethtool PHY query change, it wasn't correct. The PHY address
selected by the driver running the PHY to MAC connection decides
what PHY address GET ethtool operations return information from.
3) Fix handling of sequence number bits for encryption IV generation in
ESP driver, from Herbert Xu.
4) UDP can return -EAGAIN when we hit a bad checksum on receive, even
when there are other packets in the receive queue which is wrong.
Just respect the error returned from the generic socket recv
datagram helper. From Eric Dumazet.
5) Fix BNA driver firmware loading on big-endian systems, from Ivan
Vecera.
6) Fix regression in that we were inheriting the congestion control of
the listening socket for new connections, the intended behavior
always was to use the default in this case. From Neal Cardwell.
7) Fix NULL deref in brcmfmac driver, from Arend van Spriel.
8) OTP parsing fix in iwlwifi from Liad Kaufman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
vti6: Add pmtu handling to vti6_xmit.
Revert "net: core: 'ethtool' issue with querying phy settings"
bnx2x: Move statistics implementation into semaphores
xen: netback: read hotplug script once at start of day.
xen: netback: fix printf format string warning
Revert "netfilter: ensure number of counters is >0 in do_replace()"
net: dsa: Properly propagate errors from dsa_switch_setup_one
tcp: fix child sockets to use system default congestion control if not set
udp: fix behavior of wrong checksums
sfc: free multiple Rx buffers when required
bna: fix soft lock-up during firmware initialization failure
bna: remove unreasonable iocpf timer start
bna: fix firmware loading on big-endian machines
bridge: fix br_multicast_query_expired() bug
via-rhine: Resigning as maintainer
brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails
mac80211: Fix mac80211.h docbook comments
iwlwifi: nvm: fix otp parsing in 8000 hw family
iwlwifi: pcie: fix tracking of cmd_in_flight
ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call
...
1) Setup the core/threads/sockets bitmaps correctly so that 'lscpus'
and friends operate properly. Frtom Chris Hyser.
2) The bit that normally means "Cached Virtually" on sun4v systems,
actually changes meaning in M7 and later chips. Fix from Khalid
Aziz.
3) One some PCI-E systems we need to probe different OF properties to
fill in the PCI slot information properly, from Eric Snowberg.
4) Kill an extraneous memset after kzalloc(), from Christophe Jaillet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE
sparc64: pci slots information is not populated in sysfs
sparc: kernel: GRPCI2: Remove a useless memset
sparc64: Setup sysfs to mark LDOM sockets, cores and threads correctly
The following patch reverts the ebtables chunk that enforces counters that was
introduced in the recently applied d4778816a23f ('Revert "netfilter: ensure
number of counters is >0 in do_replace()"') since this breaks ebtables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Fri, 29 May 2015 18:28:26 +0000 (11:28 -0700)]
vti6: Add pmtu handling to vti6_xmit.
We currently rely on the PMTU discovery of xfrm.
However if a packet is localy sent, the PMTU mechanism
of xfrm tries to to local socket notification what
might not work for applications like ping that don't
check for this. So add pmtu handling to vti6_xmit to
report MTU changes immediately.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It isn't right, ethtool is meant to manage one PHY instance
per netdevice at a time, and this is selected by the SET
command. Therefore by definition the GET command must only
return the settings for the configured and selected PHY.
Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Mon, 1 Jun 2015 12:08:18 +0000 (15:08 +0300)]
bnx2x: Move statistics implementation into semaphores
Commit 30f44f372dba2 ("bnx2x: Fix statistics locking scheme") changed the
bnx2x locking around statistics state into using a mutex - but the lock
is being accessed via a timer which is forbidden.
[If compiled with CONFIG_DEBUG_MUTEXES, logs show a warning about
accessing the mutex in interrupt context]
This moves the implementation into using a semaphore [with size '1']
instead.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Mon, 1 Jun 2015 10:30:24 +0000 (11:30 +0100)]
xen: netback: read hotplug script once at start of day.
When we come to tear things down in netback_remove() and generate the
uevent it is possible that the xenstore directory has already been
removed (details below).
In such cases netback_uevent() won't be able to read the hotplug
script and will write a xenstore error node.
A recent change to the hypervisor exposed this race such that we now
sometimes lose it (where apparently we didn't ever before).
Instead read the hotplug script configuration during setup and use it
for the lifetime of the backend device.
The apparently more obvious fix of moving the transition to
state=Closed in netback_remove() to after the uevent does not work
because it is possible that we are already in state=Closed (in
reaction to the guest having disconnected as it shutdown). Being
already in Closed means the toolstack is at liberty to start tearing
down the xenstore directories. In principal it might be possible to
arrange to unregister the device sooner (e.g on transition to Closing)
such that xenstore would still be there but this state machine is
fragile and prone to anger...
A modern Xen system only relies on the hotplug uevent for driver
domains, when the backend is in the same domain as the toolstack it
will run the necessary setup/teardown directly in the correct sequence
wrt xenstore changes.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Mon, 1 Jun 2015 10:30:04 +0000 (11:30 +0100)]
xen: netback: fix printf format string warning
drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_build_gops’:
drivers/net/xen-netback/netback.c:1253:8: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
(txreq.offset&~PAGE_MASK) + txreq.size);
^
PAGE_MASK's type can vary by arch, so a cast is needed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
----
v2: Cast to unsigned long, since PAGE_MASK can vary by arch. Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bernhard Thaler [Thu, 28 May 2015 08:26:18 +0000 (10:26 +0200)]
Revert "netfilter: ensure number of counters is >0 in do_replace()"
This partially reverts commit d242dca07aea ("netfilter: ensure number of
counters is >0 in do_replace()") in net/bridge/netfilter/ebtables.c.
Setting rules with ebtables does not work any more with d242dca07aea place.
There is an error message and no rules set in the end.
e.g.
~# ebtables -t nat -A POSTROUTING --src 12:34:56:78:9a:bc -j DROP
Unable to update the kernel. Two possible causes:
1. Multiple ebtables programs were executing simultaneously. The ebtables
userspace tool doesn't by default support multiple ebtables programs
running
Reverting the ebtables part of d242dca07aea makes this work again.
Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Khalid Aziz [Wed, 27 May 2015 16:00:46 +0000 (10:00 -0600)]
sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE
sparc: Resolve conflict between sparc v9 and M7 on usage of bit 9 of TTE
Bit 9 of TTE is CV (Cacheable in V-cache) on sparc v9 processor while
the same bit 9 is MCDE (Memory Corruption Detection Enable) on M7
processor. This creates a conflicting usage of the same bit. Kernel
sets TTE.cv bit on all pages for sun4v architecture which works well
for sparc v9 but enables memory corruption detection on M7 processor
which is not the intent. This patch adds code to determine if kernel
is running on M7 processor and takes steps to not enable memory
corruption detection in TTE erroneously.
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Snowberg [Wed, 27 May 2015 15:59:19 +0000 (11:59 -0400)]
sparc64: pci slots information is not populated in sysfs
Add PCI slot numbers within sysfs for PCIe hardware. Larger
PCIe systems with nested PCI bridges and slots further
down on these bridges were not being populated within sysfs.
This will add ACPI style PCI slot numbers for these systems
since the OF 'slot-names' information is not available on
all PCIe platforms.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 29 May 2015 17:29:46 +0000 (10:29 -0700)]
net: dsa: Properly propagate errors from dsa_switch_setup_one
While shuffling some code around, dsa_switch_setup_one() was introduced,
and it was modified to return either an error code using ERR_PTR() or a
NULL pointer when running out of memory or failing to setup a switch.
This is a problem for its caler: dsa_switch_setup() which uses IS_ERR()
and expects to find an error code, not a NULL pointer, so we still try
to proceed with dsa_switch_setup() and operate on invalid memory
addresses. This can be easily reproduced by having e.g: the bcm_sf2
driver built-in, but having no such switch, such that drv->setup will
fail.
Fix this by using PTR_ERR() consistently which is both more informative
and avoids for the caller to use IS_ERR_OR_NULL().
Fixes: 5f4c7a3bb5bea ("net: dsa: split dsa_switch_setup into two functions") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Neal Cardwell [Fri, 29 May 2015 17:47:07 +0000 (13:47 -0400)]
tcp: fix child sockets to use system default congestion control if not set
Linux 3.17 and earlier are explicitly engineered so that if the app
doesn't specifically request a CC module on a listener before the SYN
arrives, then the child gets the system default CC when the connection
is established. See tcp_init_congestion_control() in 3.17 or earlier,
which says "if no choice made yet assign the current value set as
default". The change ("net: tcp: assign tcp cong_ops when tcp sk is
created") altered these semantics, so that children got their parent
listener's congestion control even if the system default had changed
after the listener was created.
This commit returns to those original semantics from 3.17 and earlier,
since they are the original semantics from 2007 in 7c104dc55 ("[TCP]:
Congestion control initialization."), and some Linux congestion
control workflows depend on that.
In summary, if a listener socket specifically sets TCP_CONGESTION to
"x", or the route locks the CC module to "x", then the child gets
"x". Otherwise the child gets current system default from
net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and
earlier, and this commit restores that.
Fixes: 1246f9f09380 ("net: tcp: assign tcp cong_ops when tcp sk is created") Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 30 May 2015 16:16:53 +0000 (09:16 -0700)]
udp: fix behavior of wrong checksums
We have two problems in UDP stack related to bogus checksums :
1) We return -EAGAIN to application even if receive queue is not empty.
This breaks applications using edge trigger epoll()
2) Under UDP flood, we can loop forever without yielding to other
processes, potentially hanging the host, especially on non SMP.
This patch is an attempt to make things better.
We might in the future add extra support for rt applications
wanting to better control time spent doing a recv() in a hostile
environment. For example we could validate checksums before queuing
packets in socket receive queue.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Pieczko [Fri, 29 May 2015 11:25:54 +0000 (12:25 +0100)]
sfc: free multiple Rx buffers when required
When Rx packet data must be dropped, all the buffers
associated with that Rx packet must be freed. Extend
and rename efx_free_rx_buffer() to efx_free_rx_buffers()
and loop through all the fragments.
By doing so this patch fixes a possible memory leak.
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 31 May 2015 23:00:34 +0000 (16:00 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
"Off-by-one in d_walk()/__dentry_kill() race fix.
It's very hard to hit; possible in the same conditions as the original
bug, except that you need the skipped branch to contain all the
remaining evictables, so that the d_walk()-calling loop in
d_invalidate() decides there's nothing more to do and doesn't go for
another pass - otherwise that next pass will sweep the sucker.
So it's not too urgent, but seeing that the fix is obvious and the
original commit has spread into all -stable branches..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
d_walk() might skip too much
Linus Torvalds [Sun, 31 May 2015 19:03:42 +0000 (12:03 -0700)]
Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux
Pull MIPS fixes from Ralf Baechle:
"MIPS fixes for 4.1 all across the tree"
* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux:
MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression
MIPS: BMIPS: Fix bmips_wr_vec()
MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set
MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
MIPS: irq: Use DECLARE_BITMAP
ttyFDC: Fix to use native endian MMIO reads
MIPS: Fix CDMM to use native endian MMIO reads
Linus Torvalds [Sun, 31 May 2015 18:39:25 +0000 (11:39 -0700)]
Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat tool fixes from Len Brown:
"Just one minor kernel dependency in this batch -- added a #define to
msr-index.h"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number to 4.7
tools/power turbostat: allow running without cpu0
tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
tools/power turbostat: enable turbostat to support Knights Landing (KNL)
tools/power turbostat: correctly display more than 2 threads/core
Pull SCSI target fixes from Nicholas Bellinger:
"These are mostly minor fixes, with the exception of the following that
address fall-out from recent v4.1-rc1 changes:
- regression fix related to the big fabric API registration changes
and configfs_depend_item() usage, that required cherry-picking one
of HCH's patches from for-next to address the issue for v4.1 code.
- remaining TCM-USER -v2 related changes to enforce full CDB
passthrough from Andy + Ilias.
Also included is a target_core_pscsi driver fix from Andy that
addresses a long standing issue with a Scsi_Host reference being
leaked on PSCSI device shutdown"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iser-target: Fix error path in isert_create_pi_ctx()
target: Use a PASSTHROUGH flag instead of transport_types
target: Move passthrough CDB parsing into a common function
target/user: Only support full command pass-through
target/user: Update example code for new ABI requirements
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem
target: Drop signal_pending checks after interruptible lock acquire
target: Add missing parentheses
target: Fix bidi command handling
target/user: Disallow full passthrough (pass_level=0)
ISCSI: fix minor memory leak