dt-bindings: iio: adc: Add compatible for MT8188

Add dt-binding documentation of auxadc for MediaTek MT8188 SoC platform.

Signed-off-by: Hui.Liu <hui.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220719014657.28714-2-hui.liu@mediatek.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: isl29028: Fix the warning in isl29028_remove()

The driver use the non-managed form of the register function in
isl29028_remove(). To keep the release order as mirroring the ordering
in probe, the driver should use non-managed form in probe, too.

The following log reveals it:

[   32.374955] isl29028 0-0010: remove
[   32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[   32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[   32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[   32.385461] Call Trace:
[   32.385807]  sysfs_unmerge_group+0x59/0x110
[   32.386110]  dpm_sysfs_remove+0x58/0xc0
[   32.386391]  device_del+0x296/0xe50
[   32.386959]  cdev_device_del+0x1d/0xd0
[   32.387231]  devm_iio_device_unreg+0x27/0xb0
[   32.387542]  devres_release_group+0x319/0x3d0
[   32.388162]  i2c_device_remove+0x93/0x1f0

Fixes: c087fd00746c ("staging: iio: isl29028: add runtime power management support")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220717004241.2281028-1-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes

After added inclination angle channels, the trigger buffer size is
insufficient. Extend the buffer size from 16 to 32 bytes, and change
the trigger buffer from the struct to a u8 array to adapt the sensor
with/without inclination angles output.
New trigger buffer data:
  - SCA3300: 3 accel channels, temp, and timestamp.
  - SCL3300: 3 accel channels, temp, 3 incli channels, and timestamp.
Readjustment the scan index to make it consistent with the buffer data.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20220701023030.2527019-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: fix iio_format_avail_range() printing for none IIO_VAL_INT

iio_format_avail_range() should print range as follow [min, step, max], so
the function was previously calling iio_format_list() with length = 3,
length variable refers to the array size of values not the number of
elements. In case of non IIO_VAL_INT values each element has integer part
and decimal part. With length = 3 this would cause premature end of loop
and result in printing only one element.

Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Fixes: 58884cd94635 ("iio: core: Consolidate iio_format_avail_{list,range}()")
Link: https://lore.kernel.org/r/20220718130706.32571-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: max1027: unlock on error path in max1027_read_single_value()

If max1027_wait_eoc() fails then call iio_device_release_direct_mode()
before returning.

Fixes: bbdb86306b29 ("iio: adc: max1027: Introduce an end of conversion helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YsbztVuAXnau2cIZ@kili
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: sx9324: add empty line in front of bullet list

"make htmldocs" emits a warning of:

    Documentation/ABI/testing/sysfs-bus-iio-sx9324:2: WARNING: Unexpected indentation.

This is due to a missing empty line in front of the bullet list.
Fix it.

Note: The line count of 2 in the warning is not exact in this case.

Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Fixes: ce8631d0c6fc ("iio:proximity:sx9324: Add SX9324 support")
Link: https://lore.kernel.org/r/202207021703.lEW6FLT1-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/abcaa4f5-7a9b-56b5-c11a-a88fef9d1e0a@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: magnetometer: hmc5843: Remove duplicate 'the'

Fix an obvious typing error, found by spellcheck(1).

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622035925.5008-1-jiangjian@cdjrlc.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros

Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-37-jic23@kernel.org

iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros

Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-36-jic23@kernel.org

iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros

Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Rishi Gupta <gupt21@gmail.com>
Reviewed-by: Rishi Gupta <gupt21@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-35-jic23@kernel.org

iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros

Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Parthiban Nallathambi <pn@denx.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-34-jic23@kernel.org

iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros

Using these new macros allows the compiler to remove the unused dev_pm_ops
structure and related functions if !CONFIG_PM without the need to mark
the functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Mathieu Othacehe <m.othacehe@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-33-jic23@kernel.org

iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()

Using these new macros allows removal of unused pm_ops structure and
functions if !CONFIG_PM without the need to mark the functions
__maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joe Sandom <joe.g.sandom@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-32-jic23@kernel.org

iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()

Using these new macros allows removal of unused pm_ops structure
and functions if !CONFIG_PM without the need to mark the function
__maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Brian Masney <masneyb@onstation.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-31-jic23@kernel.org

iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()

Using these new macros allows removal of unused pm_ops structure
and functions if !CONFIG_PM without the need to mark the functions
__maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Brian Masney <masneyb@onstation.org>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-30-jic23@kernel.org

iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()

Switching to these newer macros allows use of pm_ptr() to remove
the unused functions and structure if !CONFIG_PM without the need to
mark anything __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-29-jic23@kernel.org

iio: adc: imx8qxp: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()

Switching to these newer macros allows the compiler to remove
the unused functions and struct dev_pm_ops if !CONFIG_PM without
the need to mark anything __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-28-jic23@kernel.org

iio: light: us5182: Switch from CONFIG_PM guards to pm_ptr() etc

Letting the compiler remove these functions when the kernel is built
without CONFIG_PM support is simpler and less error prone than the
use of #ifdef based config guards.

Removing instances of this approach from IIO also stops them being
copied into new drivers.

Very likely it would be safe to use DEFINE_RUNTIME_DEV_PM_OPS() here,
but that would be a functional change.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-27-jic23@kernel.org

iio: temperature: ltc2983: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-26-jic23@kernel.org

iio: proximity: cros_ec_mkbp: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Gwendal Grignou <gwendal@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-25-jic23@kernel.org

iio: light: cm3605: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-24-jic23@kernel.org

iio: light: bh1750: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-23-jic23@kernel.org

iio: light: as73211: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Christian Eggers <ceggers@arri.de>
Reviewed-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-22-jic23@kernel.org

iio: light: al3320a: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: David Heidelberg <david@ixit.cz>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-21-jic23@kernel.org

iio: light: al3010: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: David Heidelberg <david@ixit.cz>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-20-jic23@kernel.org

iio: health: afe4404: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-19-jic23@kernel.org

iio: health: afe4403: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-18-jic23@kernel.org

iio: gyro: itg3200: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-17-jic23@kernel.org

iio: dac: mcp4725: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-16-jic23@kernel.org

iio: dac: max5821: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-15-jic23@kernel.org

iio: dac: max517: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-14-jic23@kernel.org

iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-13-jic23@kernel.org

iio: dac: ds4424: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ismail H. Kose <ihkose@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-12-jic23@kernel.org

iio: chemical: scd4x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Roan van Dijk <roan@protonic.nl>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-11-jic23@kernel.org

iio: adc: xilinx-ams: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-10-jic23@kernel.org

iio: adc: ti-am335x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-9-jic23@kernel.org

iio: adc: stmpe-adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.  This one is a little unusual as
no suspend callback, but the cleanup is still worthwhile (and eventual
aim is to get rid of old macro).

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-8-jic23@kernel.org

iio: adc: mt6577_auxadc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Cc: Hui Liu <hui.liu@mediatek.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-7-jic23@kernel.org

iio: adc: meson_saradc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-6-jic23@kernel.org

iio: adc: imx7d_adc: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

In this case we only gain the ability to have the compiler drop the
struct dev_pm_ops because the callbacks are called from paths other
than suspend and resume.  In general the purpose of this new macro
is to allow automated removal of the callbacks as well, but that doesn't
apply here.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-5-jic23@kernel.org

iio: adc: at91-sam5d2: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-4-jic23@kernel.org

iio: adc: ad799x: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-3-jic23@kernel.org

iio: accel: bma220: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Using these newer macros allows the compiler to remove the unused
structure and functions when !CONFIG_PM_SLEEP + removes the need to
mark pm functions __maybe_unused.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220621202719.13644-2-jic23@kernel.org

iio: adc: ti-ads124s08: Drop unused parameter to ads124s_read()

The channel number is never used in this call, so don't pass it in.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220626153828.589664-1-jic23@kernel.org

iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc.

We can't duplicate the description of sampling_frequency. This device
has some unusual requirements which we solved by giving a
sampling_frequency of 0 special meaning. As such add a note
about this unusual usage to the main documentation.

Whilst I don't particularly like this resolution, it is the best
I could come up with given earlier discussion on this topic.

Link: https://lore.kernel.org/linux-iio/20210315101217.00002c50@Huawei.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220626165511.602202-4-jic23@kernel.org

iio: ABI: max31865: Drop in_filter_notch_centre_frequency as in main docs.

As this is the last element in the file, also delete the file.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Navin Sankar Velliangiri <navin@linumiz.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220626165511.602202-3-jic23@kernel.org

iio: ABI: temperature: Unify documentation for thermocouple fault detection.

Kernel documentation for a given ABI element should not be duplicated
in multiple files, so pull them into one higher level documentation file.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Navin Sankar Velliangiri <navin@linumiz.com>
Cc: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20220626165511.602202-2-jic23@kernel.org

iio: Be consistent with allocation result tests.

Make both allocation result tests use the same format

    if (!ptr)

Signed-off-by: Joe Simmons-Talbott <joetalbott@gmail.com>
Link: https://lore.kernel.org/r/20220718020348.32047-1-joetalbott@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Use parens with sizeof

Prefer 'sizeof(var)' over 'sizeof var' as reported by checkpatch.pl.

Signed-off-by: Joe Simmons-Talbott <joetalbott@gmail.com>
Link: https://lore.kernel.org/r/20220717153438.10800-1-joetalbott@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: npcm: Add NPCM8XX support

Adding ADC NPCM8XX support to NPCM ADC driver.
ADC NPCM8XX uses a different resolution and voltage reference.

As part of adding NPCM8XX support:
- Add NPCM8XX specific compatible string.
- Add data to handle architecture-specific ADC parameters.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20220713132640.215916-3-tmaimon77@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: npcm: Add npcm845 compatible string

Add a compatible string for Nuvoton BMC NPCM845 ADC.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220713132640.215916-2-tmaimon77@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: cros: Register FIFO callback after sensor is registered

Instead of registering callback to process sensor events right at
initialization time, wait for the sensor to be register in the iio
subsystem.

Events can come at probe time (in case the kernel rebooted abruptly
without switching the sensor off for  instance), and be sent to IIO core
before the sensor is fully registered.

Fixes: c17c81e4fdd4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220711144716.642617-1-gwendal@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: test: rework Kconfig to support modules

Rework the IIO test Kconfig to support building KUnit tests as modules.
This lets users execute tests at runtime in addition to the usual
tools/testing/kunit/kunit.py script.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-6-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: afe: rescale: export symbols used during testing

In preparation for module support, export symbols use during testing.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-5-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: test: format: follow CONFIG_ naming convention

The KUnit documentation indicates that all KUnit Kconfig entries must
match CONFIG_<name>_KUNIT_TEST: where <name> is the name of the test
suite. Rename the IIO_TEST_FORMAT configuration accordingly.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-4-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: test: format: add MODULE_* information

In preparation for module support, add missing MODULE_* information.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-3-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: test: rescale: add MODULE_* information

In preparation for module support, add missing MODULE_* information.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220710013109.3349104-2-liambeguin@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7949: Fix error message

Signed-off-by: Thorsten Scherer <t.scherer@eckelmann.de>
Reviewed-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20220708201720.16523-1-t.scherer@eckelmann.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: cio-dac: Cleanup indexing for DAC writes

Simplify DAC write code by defining base member as u16 __iomem *; DAC
registers are 16-bit so this allows us to index each DAC channel
directly in a loop rather than calculating the offsets by multipling by
2 each time.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/d9dab6696af7eabb2d46f5cbc7871329f499c1c9.1657213745.git.william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stx104: Implement and utilize register structures

Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.

Tested-by: Fred Eckert <Frede@cmslaser.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/8cb91d5b53e57b066120e42ea07000d6c7ef5543.1657213745.git.william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: magnetometer: rm3100: do not explicity set INDIO_BUFFER_TRIGGERED mode

The core sets INDIO_BUFFER_TRIGGERED as part of
devm_iio_triggered_buffer_setup().

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20220702085005.31666-1-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: sx_common: Allow IIO core to take care of firmware node

IIO core correctly will take care of firmware node if it's not set in
the driver. Drop ACPI and OF specifics from the driver and allow IIO
core to handle this.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220615114746.2767-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: sx_common: Don't use IIO device for properties

It's not correct to use artificial device created by IIO core to
retrieve device properties. Even ->get_default_reg() callback
takes a simple struct device pointer which suggests it wants to
operate on the real device.

Correct this by replacing pointer to IIO device by a real device
pointer in the caller of ->get_default_reg().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20220615114746.2767-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: trigger: move trig->owner init to trigger allocate() stage

To provide a new IIO trigger to the IIO core, usually driver executes the
following pipeline: allocate()/register()/get(). Before, IIO core assigned
trig->owner as a pointer to the module which registered this trigger at
the register() stage. But actually the trigger object is owned by the
module earlier, on the allocate() stage, when trigger object is
successfully allocated for the driver.

This patch moves trig->owner initialization from register()
stage of trigger initialization pipeline to allocate() stage to
eliminate all misunderstandings and time gaps between trigger object
creation and owner acquiring.

Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20220601174837.20292-1-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: Add imx6ul & imx6sx compatibles

Both are already using the vf610 compatible.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220613123529.466528-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Merge tag 'extcon-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v5.20

Detailed description for this pull request:
1. Add new connector type of both EXTCON_DISP_CVBS and EXTCON_DISP_EDP
- Add both EXTCON_DISP_CVBS for Composite Video Broadcast Signal[1] and
  EXTCON_DISP_EDP for Embedded Display Port[2].
  [1] https://en.wikipedia.org/wiki/Composite_video
  [2] https://en.wikipedia.org/wiki/DisplayPort#eDP

2. Fix the minor issues of extcon provider driver
- Drop unused remove function on extcon-fsa9480.c
- Remove extraneous space before a debug message on extcon-palmas.c
- Remove duplicate word in the comment
- Drop useless mask_invert flag on irqchip on extcon-sm5502.c
- Drop useless mask_invert flag on irqchip on extcon-rt8973a.c

* tag 'extcon-next-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: Add EXTCON_DISP_CVBS and EXTCON_DISP_EDP
  extcon: rt8973a: Drop useless mask_invert flag on irqchip
  extcon: sm5502: Drop useless mask_invert flag on irqchip
  extcon: Drop unexpected word "the" in the comments
  extcon: Remove extraneous space before a debug message
  extcon: fsa9480: Drop no-op remove function

Merge tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next

Georgi writes:

interconnect changes for 5.20

Here are the interconnect changes for the 5.20-rc1 merge window consisting
of two new drivers, misc driver improvements and new device managed API.

 Core change:
- Add device managed bulk API

 Driver changes:
- New driver for NXP i.MX8MP platforms
- New driver for Qualcomm SM6350 platforms
- Multiple bucket support for Qualcomm RPM-based drivers.

Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
  PM / devfreq: imx: Register i.MX8MP interconnect device
  interconnect: imx: Add platform driver for imx8mp
  interconnect: imx: configure NoC mode/prioriry/ext_control
  interconnect: imx: introduce imx_icc_provider
  interconnect: imx: set src node
  interconnect: imx: fix max_node_id
  interconnect: qcom: icc-rpm: Set bandwidth and clock for bucket values
  interconnect: qcom: icc-rpm: Support multiple buckets
  interconnect: qcom: icc-rpm: Change to use qcom_icc_xlate_extended()
  interconnect: qcom: Move qcom_icc_xlate_extended() to a common file
  dt-bindings: interconnect: Update property for icc-rpm path tag
  interconnect: icc-rpm: Set destination bandwidth as well as source bandwidth
  interconnect: qcom: msm8939: Use icc_sync_state
  interconnect: add device managed bulk API
  dt-bindings: interconnect: add fsl,imx8mp.h
  dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
  interconnect: qcom: Add SM6350 driver support
  dt-bindings: interconnect: Add Qualcomm SM6350 NoC support
  dt-bindings: interconnect: qcom: Split out rpmh-common bindings
  interconnect: qcom: icc-rpmh: Support child NoC device probe

firmware: stratix10-svc: fix kernel-doc warning

include/linux/firmware/intel/stratix10-svc-client.h:55: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
 * Flag bit for COMMAND_RECONFIG

Fixes: 8ad453be8650 ("firmware: stratix10-svc: add new FCS commands")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220715150349.2413994-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'icc-rpm' into icc-next

This patch set is to support bucket in icc-rpm driver, so it implements
the similar mechanism in the icc-rpmh driver.

It uses interconnect path tag to indicate the bandwidth voting is for
which buckets, and there have three kinds of buckets: AWC, WAKE and
SLEEP, finally the wake and sleep bucket values are used to set the
corresponding clock (active and sleep clocks).  So far, we keep the AWC
bucket but doesn't really use it.

Link: https://lore.kernel.org/r/20220712015929.2789881-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>

Merge branch 'icc-imx8mp' into icc-next

This patchset is to support i.MX8MP NoC settings, i.MX8MP NoC initial
value after power up is invalid, need set a valid value after related
power domain up.

This patchset also includes two patch[1,2] during my development to enable
the ICC feature for i.MX8MP.

I not include ddrc DVFS in this patchset, ths patchset is only to
support NoC value mode/priority/ext_control being set to a valid value
that suggested by i.MX Chip Design Team. The value is same as NXP
downstream one inside Arm Trusted Firmware:
https://source.codeaurora.org/external/imx/imx-atf/tree/plat/imx/imx8m/i/gpc.c?h=lf_v2.4#n97

Link: https://lore.kernel.org/r/20220703091132.1412063-1-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

PM / devfreq: imx: Register i.MX8MP interconnect device

Same to i.MX8MM/N/Q, register i.MX8MP interconnect device to make
i.MX8MP Interconnect driver work.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-10-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

interconnect: imx: Add platform driver for imx8mp

Add a platform driver for the i.MX8MP SoC describing bus topology, based
on internal documentation.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-9-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

interconnect: imx: configure NoC mode/prioriry/ext_control

Introduce imx_icc_noc_setting structure to describe a master port setting
Pass imx_icc_noc_setting as a parameter from specific driver
Set priority level, mode, ext control in imx_icc_node_set

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-8-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

interconnect: imx: introduce imx_icc_provider

Introduce imx_icc_provider as a wrapper of icc_provider to
add i.MX specific information.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-7-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

interconnect: imx: set src node

When set QoS for a icc path, only set dst icc node is not enough,
also need to set src icc node.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-6-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

interconnect: imx: fix max_node_id

max_node_id not equal to the ARRAY_SIZE of node array, need increase 1,
otherwise xlate will fail for the last entry. And rename max_node_id
to num_nodes to reflect the reality.

Fixes: b6d08f3226570 ("interconnect: Add imx core driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-5-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>

Merge tag 'soundwire-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

Vinod writes:
 "soundwire updates for 5.20-rc1

   - Core: solve the driver bind/unbind problem and remove ops pointer
   - intel: runtime pm updates
   - qcom: audio clock gating updates and device status checks"

* tag 'soundwire-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: Enable software clock gating requirement flag
  soundwire: qcom: Check device status before reading devid
  soundwire: qcom: Add flag for software clock gating check
  soundwire: qcom: Add support for controlling audio CGCR from HLOS
  soundwire: intel: use pm_runtime_resume() on component probe
  soundwire: peripheral: remove useless ops pointer
  soundwire: revisit driver bind/unbind and callbacks
  soundwire: bus_type: fix remove and shutdown support

extcon: Add EXTCON_DISP_CVBS and EXTCON_DISP_EDP

Add EXTCON_DISP_CVBS for Composite Video Broadcast Signal.
Add EXTCON_DISP_EDP for Embedded Display Port

[1] https://en.wikipedia.org/wiki/Composite_video
[2] https://en.wikipedia.org/wiki/DisplayPort#eDP

Signed-off-by: Michael Wu <michael@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

extcon: rt8973a: Drop useless mask_invert flag on irqchip

There's no need to set the flag explicitly to false, since that
is the default value from zero initialization.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

extcon: sm5502: Drop useless mask_invert flag on irqchip

There's no need to set the flag explicitly to false, since that
is the default value from zero initialization.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

extcon: Drop unexpected word "the" in the comments

there is an unexpected word "the" in the comments that need to be dropped

file: ./drivers/extcon/extcon.c
line: 250

/* Find the the index of extcon cable in edev->supported_cable */
changed to
/* Find the index of extcon cable in edev->supported_cable */

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

extcon: Remove extraneous space before a debug message

There is an extreneous space before a dev_dbg message, remove it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

extcon: fsa9480: Drop no-op remove function

A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

MAINTAINERS: Update 104-QUAD-8 driver maintainers list

Syed Nayyar Waris is no longer available for 104-QUAD-8 driver
maintenance. William Breathitt Gray will continue as the 104-QUAD-8
driver maintainer.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/53ecbe49e48dd142fc19f6436fdbe5b8573c5f9c.1657813472.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: 104-quad-8: Implement and utilize register structures

Reduce magic numbers and improve code readability by implementing and
utilizing named register data structures.

Link: https://lore.kernel.org/r/20220707171709.36010-1-william.gray@linaro.org/
Cc: Syed Nayyar Waris <syednwaris@gmail.com>
Tested-by: Fred Eckert <Frede@cmslaser.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/285fdc7c03892251f50bdbf2c28c19998243a6a3.1657813472.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

counter: 104-quad-8: Utilize iomap interface

This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.

Link: https://lore.kernel.org/r/861c003318dce3d2bef4061711643bb04f5ec14f.1652201921.git.william.gray@linaro.org
Cc: Syed Nayyar Waris <syednwaris@gmail.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/e971b897cacfac4cb2eca478f5533d2875f5cadd.1657813472.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: Update info for William Breathitt Gray

A new job position bestowed a new email address and Counter subsystem
git tree for me.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/694c2da1a01d1a3065239bf2c060018cb3308c34.1657813472.git.william.gray@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: stratix10-svc: To support a command ATF Get Version

We are to support a new SMC Command of hexadecimal 0x200 that returns
the ATF Firmware major and minor version.

Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220711223140.2307945-6-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: stratix10-svc: extend svc to support RSU feature

Extend Intel Stratix10 service layer driver to support new RSU
DCMF status reporting.

The status of each DCMF is reported. The currently used DCMF is used as
reference, while the other three are compared against it to determine if
they are corrupted.

DCMF = Decision Configuration Management Firmware
RSU = Remote System Update

Signed-off-by: Radu Bacrau <radu.bacrau@intel.com>
Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220711223140.2307945-5-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: stratix10-rsu: extend RSU driver to get DCMF status

Extend RSU driver to get DCMF status.

The status of each DCMF is reported. The currently used DCMF is used as
reference, while the other three are compared against it to determine if
they are corrupted.

DCMF = Decision Configuration Management Firmware.
RSU = Remote System Update

Signed-off-by: Radu Bacrau <radu.bacrau@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220711223140.2307945-4-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: stratix10-svc: add new FCS commands

Extending the fpga svc driver to support 6 new FPGA Crypto
Service(FCS) commands.
We are adding FCS SDOS data encryption and decryption,
random number generator, image validation request,
reading the data provision and certificate validation.

Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220711223140.2307945-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: stratix10-svc: add FCS polling command

Introduce a new SMC command INTEL_SIP_SMC_FUNCID_SERVICE_COMPLETED
that polls if a previous asynchronous command was completed. This
SMC command is used by the new FPGA Crypto Service (FCS).
A basic example is that the FCS sends an AES data encryption
call to the secure device manager(SDM) and waits for the completion
of the operation by continuously polling the results with the new
command.

Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220711223140.2307945-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: stratix10-svc: Add support for FCS

Extend Intel service layer driver to support FPGA Crypto service(FCS)
features on Intel Soc platforms. Adding an additional channel and FCS
platform driver ("intel_fcs") as part of the probe method.
FCS driver uses the driver to send crypto operations' commands to
the secure device manager(SDM) on Intel Soc platforms Stratix10 and
Agilex.

Signed-off-by: Ang Tien Sung <tien.sung.ang@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20220711223140.2307945-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: Add a mechanism to detect stalls on guest vCPUs

This driver creates per-cpu hrtimers which are required to do the
periodic 'pet' operation. On a conventional watchdog-core driver, the
userspace is responsible for delivering the 'pet' events by writing to
the particular /dev/watchdogN node. In this case we require a strong
thread affinity to be able to account for lost time on a per vCPU.

This part of the driver is the 'frontend' which is reponsible for
delivering the periodic 'pet' events, configuring the virtual peripheral
and listening for cpu hotplug events. The other part of the driver is
an emulated MMIO device which is part of the KVM virtual machine
monitor and this part accounts for lost time by looking at the
/proc/{}/task/{}/stat entries.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Will Deacon <will@kernel.org>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20220711081720.2870509-3-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: vcpu_stall_detector: Add qemu,vcpu-stall-detector compatible

The VCPU stall detection mechanism allows to configure the expiration
duration and the internal counter clock frequency measured in Hz.
Add these properties in the schema.

While this is a memory mapped virtual device, it is expected to be loaded
when the DT contains the compatible: "qemu,vcpu-stall-detector" node.
In a protected VM we trust the generated DT nodes and we don't rely on
the host to present the hardware peripherals.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20220711081720.2870509-2-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Fix a memory leak in an error handling path

A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the
error handling path of afu_allocate_irqs().

Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ce5869418f5838187946eb6b11a52715a93ece3d.1657566849.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Use the bitmap API to allocate bitmaps

Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.

It is less verbose and it improves the semantic.

Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/59010cc7c62443030c69cb1ce0b2b62c5d47e064.1657566849.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: fix clang -Wformat warning

When building with Clang we encounter the following warning:
| drivers/misc/mei/hw-me.c:564:44: error: format specifies type 'unsigned
| short' but the argument has type 'int' [-Werror,-Wformat]
| dev_dbg(dev->dev, "empty slots = %hu.\n", empty_slots);

The format specifier used is `%hu` which specifies an unsigned short,
however, empty_slots is an int -- hence the warning.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20220708203549.3834790-1-justinstitt@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: idt_89hpesx: uninitialized data in idt_dbgfs_csr_write()

The simple_write_to_buffer() function will return positive/success if it
is able to write a single byte anywhere within the buffer.  However that
potentially leaves a lot of the buffer uninitialized.

In this code it's better to return 0 if the offset is non-zero.  This
code is not written to support partial writes.  And then return -EFAULT
if the buffer is not completely initialized.

Fixes: 5ebcf84aacc1 ("eeprom: Add IDT 89HPESx EEPROM/CSR driver")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ysg1Pu/nzSMe3r1q@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO new device support, features and minor fixes for 5.20

Several on-running cleanup efforts dominate this time, plus the DMA
safety alignment issue identified due to improved understanding of
the restrictions as a result of Catalin Marinas' efforts in that area.

One immutable branch in here due to MFD and SPMI elements needed for
the qcom-rradc driver.

Device support
* bmi088
  - Add support for bmi085 (accelerometer part of IMU)
  - Add support for bmi090l (accelerometer part of IMU)
* mcp4922
  - Add support for single channel device MCP4921
* rzg2l-adc
  - Add compatible and minor tweaks to support RZ/G2UL ADC
* sca3300
  - Add support for scl3300 including refactoring driver to support
    multiple device types and cleanup noticed whilst working on driver.
* spmi-rradc
  - New driver for Qualcomm SPMI Round Robin ADC including necessary
    additional utility functions in SPMI core and related MFD driver.
* ti-dac55781
  - Add compatible for DAC121C081 which is very similar to existing parts.

Features
* core
  - Warn on iio_trigger_get() on an unregistered IIO trigger.
* bma400
  - Triggered buffer support
  - Activity and step counting
  - Misc driver improvements such as devm and header ordering
* cm32181
  - Add PM support.
* cros_ec
  - Sensor location support
* sx9324
  - Add precharge resistor setting
  - Add internal compensation resistor setting
  - Add CS idle/sleep mode.
* sx9360
  - Add precharge resistor setting
* vl53l0x
  - Handle reset GPIO, regulator and relax handling of irq type.

Cleanup and minor fixes:

Treewide changes
- Cleanup of error handling in remove functions in many drivers.
- Update dt-binding maintainers for a number of ADI bindings.
- Several sets of conversion of drivers from device tree specific to
  generic device properties. Includes fixing up various related
  header and Kconfig issues.
- Drop include of of.h from iio.h and fix up drivers that need to include
  it directly.
- More moves of clusters of drivers into appropriate IIO_XXX namespaces.
- Tree wide fix of a long running bug around DMA safety requirements.
  IIO was using __cacheline_aligned to pad iio_priv() structures. This
  worked for a long time by coincidence, but correct alignment is
  ARCH_KMALLOC_MINALIGN.  As there is activity around this area, introduce
  an IIO local IIO_DMA_MINALIGN to allow for changing it in one place rather
  than every driver in future. Note, there have been no reports of this
  bug in the wild, and it may not happen on any platforms supported by
  upstream, so no rush to backport these fixes.

Other cleanup
* core
  - Switch to ida_alloc()/free()
  - Drop unused iio_get_time_res()
  - Octal permissions and DEVICE_ATTR_* macros.
  - Cleanup bared unsigned usage.
* MAINTAINERS
  - Add include/dt-bindings/iio/ to the main IIO entry.
* ad5380
  - Comment syntax fix.
* ad74413r
  - Call to for_each_set_bit_from(), with from value as 0 replaced.
* ad7768-1
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* adxl345
  - Fix wrong address in dt-binding example.
* adxl367
  - Drop extra update of FIFO watermark.
* at91-sama5d2
  - Limit requested watermark to the hwfifo size.
* bmg160, bme680
  - Typos
* cio-dac
  - Switch to iomap rather than direct use of ioports
* kxsd9
  - Replace CONFIG_PM guards with new PM macros that let the compiler
    cleanly remove the unused code and structures when !CONFIG_PM
* lsm6dsx
  - Use new pm_sleep_ptr() and EXPORT_SIMPLE_DEV_PM_OPS(). Then move
    to Namespace.
* meson_saradc - general cleanup.
  - Avoid attaching resources to iio_dev->dev
  - Use same struct device for all error messages
  - Convert to dev_err_probe() and use local struct device *dev to
    reduce code complexity.
  - Use devm_clk_get_optional() instead of hand rolling.
  - Use regmap_read_poll_timeout() instead of hand rolling.
* mma7660
  - Drop ACPI_PTR() use that is unhelpful.
* mpu3050
  - Stop exporting symbols not used outside of module
  - Switch to new DEFINE_RUNTIME_DEV_PM_OPS() macro and move to Namespace.
* ping
  - Typo fix
* qcom-spmi-rradc
  - Typo fix
* sc27xx
  - Convert to generic struct u32_fract
* srf08
  - Drop a redundant check on !val
* st_lsm6dsx
  - Limit the requested watermark to the hwfifo size.
* stm32-adc
  - Use generic_handle_domain_irq() instead of opencoding.
  - Fix handling of ADC disable.
* stm32-dac
  - Use str_enabled_disable() instead of open coding.
* stx104
  - Switch to iomap rather than direct use of ioports
* tsc2046
  - Drop explicit setting of INDIO_BUFFER_TRIGGERED as now done by the core.
* tsl2563
  - Replace flush_scheduled_work() with cancel_delayed_work_sync()
  - Replace cancel_delayed_work() with cancel_delayed_work_sync()
* vl53l0x
  - Make the VDD regulator optional by allowing a dummy regulator.

* tag 'iio-for-5.20a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (244 commits)
  iio: adc: xilinx-xadc: Drop duplicate NULL check in xadc_parse_dt()
  iio: adc: xilinx-xadc: Make use of device properties
  iio: light: cm32181: Add PM support
  iio: adc: ad778-1: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: ti-tsc2046: do not explicity set INDIO_BUFFER_TRIGGERED mode
  iio: adc: stm32-adc: disable adc before calibration
  iio: adc: stm32-adc: make safe adc disable
  iio: dac: ad5380: align '*' each line and drop unneeded blank line
  iio: adc: qcom-spmi-rradc: Fix spelling mistake "coherrency" -> "coherency"
  iio: Don't use bare "unsigned"
  dt-bindings: iio: dac: mcp4922: expand for mcp4921 support
  iio: dac: mcp4922: add support to mcp4921
  iio: chemical: sps30: Move symbol exports into IIO_SPS30 namespace
  iio: pressure: bmp280: Move symbol exports to IIO_BMP280 namespace
  iio: imu: bmi160: Move exported symbols to IIO_BMI160 namespace
  iio: adc: stm32-adc: Use generic_handle_domain_irq()
  proximity: vl53l0x: Make VDD regulator actually optional
  MAINTAINERS: add include/dt-bindings/iio to IIO SUBSYSTEM AND DRIVERS
  dt-bindings: iio/accel: Fix adi,adxl345/6 example I2C address
  iio: gyro: bmg160: Fix typo in comment
  ...