Christian König [Thu, 11 Nov 2021 14:18:34 +0000 (15:18 +0100)]
dma-buf: drop the DAG approach for the dma_resv object v3
So far we had the approach of using a directed acyclic
graph with the dma_resv obj.
This turned out to have many downsides, especially it means
that every single driver and user of this interface needs
to be aware of this restriction when adding fences. If the
rules for the DAG are not followed then we end up with
potential hard to debug memory corruption, information
leaks or even elephant big security holes because we allow
userspace to access freed up memory.
Since we already took a step back from that by always
looking at all fences we now go a step further and stop
dropping the shared fences when a new exclusive one is
added.
v2: Drop some now superflous documentation
v3: Add some more documentation for the new handling.
In order to avoid any probe ordering issues, the I2C based downstream
bridge drivers now register and attach the DSI devices at the probe
instead of doing it on drm_bridge_function.attach().
Examples of those commits are:
commit <6525745ec8da> ("drm/bridge: sn65dsi83: Register and attach our
DSI device at probe")
commit <3a2fe0157512> ("drm/bridge: lt8912b: Register and attach our DSI
device at probe")
commit <13082a0d3b50> ("drm/bridge: adv7511: Register and attach our DSI
device at probe")
dw-mipi-dsi has panel or bridge finding code based on previous downstream
bridges, so revert the same and make the panel or bridge funding in host
attach as before.
Marek Vasut [Thu, 31 Mar 2022 15:39:23 +0000 (17:39 +0200)]
drm/bridge: lt9611: Add atomic_get_input_bus_fmts
Implement .atomic_get_input_bus_fmts callback, which sets up
the input (scanout-engine-end) formats, so that those formats
can then be used in pipeline format negotiation between this
bridge and the scanout engine.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dave Airlie <airlied@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331153923.14314-2-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:39:22 +0000 (17:39 +0200)]
drm/bridge: lt9611: Switch to atomic operations
Use the atomic version of the enable/disable operations to continue the
transition to the atomic API. This will be needed to access the mode
from the atomic state.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dave Airlie <airlied@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331153923.14314-1-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:09 +0000 (17:05 +0200)]
drm: bridge: icn6211: Read and validate chip IDs before configuration
Read out the Vendor/Chip/Version ID registers from the chip before
performing any configuration, and validate that the registers have
correct values. This is mostly a simple test whether DSI register
access does work, since that tends to be broken on various bridges.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-12-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:08 +0000 (17:05 +0200)]
drm: bridge: icn6211: Rework ICN6211_DSI to chipone_writeb()
Rename and inline macro ICN6211_DSI() into function chipone_writeb()
to keep all function names lower-case. No functional change.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-11-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:07 +0000 (17:05 +0200)]
drm: bridge: icn6211: Add I2C configuration support
The ICN6211 chip starts in I2C configuration mode after cold boot.
Implement support for configuring the chip via I2C in addition to
the current DSI LP command mode configuration support. The later
seems to be available only on chips which have additional MCU on
the panel/bridge board which preconfigures the ICN6211, while the
I2C configuration mode added by this patch does not require any
such MCU.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-10-marex@denx.de
Implement .atomic_get_input_bus_fmts callback, which sets up the
input (DSI-end) format, and that format can then be used in pipeline
format negotiation between the DSI-end of this bridge and the other
component closer to the scanout engine.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-9-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:05 +0000 (17:05 +0200)]
drm: bridge: icn6211: Set SYS_CTRL_1 to value used in examples
Both example code [1], [2] as well as one provided by custom panel vendor
set register SYS_CTRL_1 to 0x88. What exactly does the value mean is unknown
due to unavailable datasheet. Align this register value with example code.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-8-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:04 +0000 (17:05 +0200)]
drm: bridge: icn6211: Disable DPI color swap
The chip is capable of swapping DPI RGB channels. The driver currently
does not implement support for this functionality. Write the MIPI_PN_SWAP
register to 0 to assure the color swap is disabled.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-7-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:03 +0000 (17:05 +0200)]
drm: bridge: icn6211: Use DSI burst mode without EoT and with LP command mode
The DSI burst mode is more energy efficient than the DSI sync pulse mode,
make use of the burst mode since the chip supports it as well. Disable the
generation of EoT packet, the chip ignores it, so no point in emitting it.
Enable transmission of data in LP mode, otherwise register read via DSI
does not work with this chip.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-6-marex@denx.de
The chip contains fractional PLL, however the driver currently hard-codes
one specific PLL setting. Implement generic PLL parameter calculation code,
so any DPI panel with arbitrary pixel clock can be attached to this bridge.
The datasheet for this bridge is not available, the PLL behavior has been
inferred from [1] and [2] and by analyzing the DPI pixel clock with scope.
The PLL limits might be wrong, but at least the calculated values match all
the example code available. This is better than one hard-coded pixel clock
value anyway.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-5-marex@denx.de
The driver currently hard-codes HS/VS polarity to active-low and DE to
active-high, which is not correct for a lot of supported DPI panels.
Add the missing mode flag handling for HS/VS/DE polarity.
Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-4-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:05:00 +0000 (17:05 +0200)]
drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling
The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.
The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.
Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.
Acked-by: Maxime Ripard <maxime@cerno.tech> Fixes: 67fcaad720f44 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-3-marex@denx.de
Marek Vasut [Thu, 31 Mar 2022 15:04:59 +0000 (17:04 +0200)]
drm: bridge: icn6211: Fix register layout
The chip register layout has nothing to do with MIPI DCS, the registers
incorrectly marked as MIPI DCS in the driver are regular chip registers
often with completely different function.
Fill in the actual register names and bits from [1] and [2] and add the
entire register layout, since the documentation for this chip is hard to
come by.
Acked-by: Maxime Ripard <maxime@cerno.tech> Fixes: 67fcaad720f44 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-2-marex@denx.de
Jagan Teki [Thu, 3 Mar 2022 16:36:53 +0000 (22:06 +0530)]
drm: exynos: dsi: Convert to bridge driver
Convert the encoders to bridge drivers in order to standardize on
a single API with built-in dumb encoder support for compatibility
with existing component drivers.
Driver bridge conversion will help to reuse the same bridge on
different platforms as exynos dsi driver can be used as a Samsung
DSIM and use it for i.MX8MM platform.
Bridge conversion,
- Drops drm_encoder_helper_funcs.
- Adds drm_bridge_funcs and register a drm bridge.
Jagan Teki [Thu, 3 Mar 2022 16:36:51 +0000 (22:06 +0530)]
exynos: drm: dsi: Attach in_bridge in MIC driver
MIC drivers in the Exynos5433 display pipeline are already registered
as bridge drivers and it is more advisable to attach the downstream
bridge on the bridge attach call instead of doing the same in the
DSI driver.
This makes bridge attachment more meaningful and avoids the races
during bridge function calls.
So, move the bridge finding and drm_bridge_attach from DSI to MIC.
Jagan Teki [Thu, 3 Mar 2022 16:36:50 +0000 (22:06 +0530)]
drm: bridge: panel: Reset the connector state pointer
Trigger hotplug event with drm_kms_helper_hotplug_event might fail if the
connector state pointer is NULL.
BUG observed in exynos dsi driver where drm_bridge_attach is trying to
register a connector in panel_bridge before the hotplug event is triggered.
WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_atomic_state_helper.c:494 drm_atomic_helper_connector_duplicate_state+0x94/0x9c
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.16.0-rc1-00009-g704b1dbfa4c2 #11058
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0110b30>] (unwind_backtrace) from [<c010c618>] (show_stack+0x10/0x14)
[<c010c618>] (show_stack) from [<c0b657d4>] (dump_stack_lvl+0x58/0x70)
[<c0b657d4>] (dump_stack_lvl) from [<c01261dc>] (__warn+0xd0/0x134)
[<c01261dc>] (__warn) from [<c0b5f628>] (warn_slowpath_fmt+0x5c/0xb4)
[<c0b5f628>] (warn_slowpath_fmt) from [<c064bce4>] (drm_atomic_helper_connector_duplicate_state+0x94/0x9c)
[<c064bce4>] (drm_atomic_helper_connector_duplicate_state) from [<c0666b64>] (drm_atomic_get_connector_state+0xd4/0x190)
[<c0666b64>] (drm_atomic_get_connector_state) from [<c0667928>] (__drm_atomic_helper_set_config+0x314/0x368)
[<c0667928>] (__drm_atomic_helper_set_config) from [<c067e628>] (drm_client_modeset_commit_atomic+0x170/0x278)
[<c067e628>] (drm_client_modeset_commit_atomic) from [<c067e800>] (drm_client_modeset_commit_locked+0x60/0x1c8)
[<c067e800>] (drm_client_modeset_commit_locked) from [<c067e98c>] (drm_client_modeset_commit+0x24/0x40)
[<c067e98c>] (drm_client_modeset_commit) from [<c06509c0>] (drm_fb_helper_set_par+0xb8/0xf8)
[<c06509c0>] (drm_fb_helper_set_par) from [<c05b86d0>] (fbcon_init+0x2c0/0x518)
[<c05b86d0>] (fbcon_init) from [<c060636c>] (visual_init+0xc0/0x108)
[<c060636c>] (visual_init) from [<c06085e4>] (do_bind_con_driver+0x1b8/0x3a4)
[<c06085e4>] (do_bind_con_driver) from [<c0608b40>] (do_take_over_console+0x13c/0x1e8)
[<c0608b40>] (do_take_over_console) from [<c05b6854>] (do_fbcon_takeover+0x78/0xd8)
[<c05b6854>] (do_fbcon_takeover) from [<c05b1154>] (register_framebuffer+0x208/0x2e0)
[<c05b1154>] (register_framebuffer) from [<c064ead0>] (__drm_fb_helper_initial_config_and_unlock+0x400/0x63c)
[<c064ead0>] (__drm_fb_helper_initial_config_and_unlock) from [<c063a718>] (drm_kms_helper_hotplug_event+0x24/0x30)
[<c063a718>] (drm_kms_helper_hotplug_event) from [<c068f668>] (exynos_dsi_host_attach+0x174/0x1fc)
[<c068f668>] (exynos_dsi_host_attach) from [<c0699354>] (s6e8aa0_probe+0x1b4/0x218)
So reset the atomic state for a given connector by freeing the state pointer
and allocate a new empty state object. This can be done using connector
funcs->reset helper and has to be done before the hotplug even calls.
This patch calls the connector->funcs->reset in panel_bridge_attach.
Marek Vasut [Tue, 29 Mar 2022 08:50:15 +0000 (10:50 +0200)]
drm/bridge: tc358767: Add DSI-to-DPI mode support
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Add support for the
DSI-to-DPI mode.
This requires skipping most of the (e)DP initialization code, which is
currently a large part of this driver, hence it is better to have far
simpler separate tc_dpi_bridge_funcs and their implementation.
The configuration of DPI output is also much simpler. The configuration
of the DSI input is rather similar to the other TC bridge chips.
The Pixel PLL in DPI output mode does not have the 65..150 MHz limitation
imposed on the (e)DP output mode, so this limitation is skipped to permit
operating panels with far slower pixel clock, even below 9 MHz. This mode
of operation of the PLL is valid and tested.
The detection of bridge mode is now added into tc_probe_bridge_mode(),
where in case a DPI panel is found on port@1 endpoint@1, the mode is
assumed to be DSI-to-DPI. If (e)DP is detected on port@2, the mode is
assumed to be DPI-to-(e)DP.
The DSI-to-(e)DP mode is not supported due to lack of proper hardware,
but this would be some sort of mix between the two aforementioned modes.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-12-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:14 +0000 (10:50 +0200)]
drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP part
The tc_set_video_mode() sets up both common and (e)DP video mode settings of
the bridge chip. Split the function into tc_set_common_video_mode() to set
the common settings and tc_set_edp_video_mode() to set the (e)DP specific
settings. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-11-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:13 +0000 (10:50 +0200)]
drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. It is possible to find out the mode in which the
bridge should be operated by testing connected endpoints in DT.
Possible connections:
DPI -> port@1 -> port@2 -> eDP :: [port@0 is not connected]
DSI -> port@0 -> port@2 -> eDP :: [port@1 is not connected]
DSI -> port@0 -> port@1 -> DPI :: [port@2 is not connected]
Add function to determine the bridge mode based on connected endpoints.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-10-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:12 +0000 (10:50 +0200)]
drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()
The bridge ops are specific to the bridge configuration, move them
into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
DSI-to-DPI mode. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-9-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:11 +0000 (10:50 +0200)]
drm/bridge: tc358767: Wrap (e)DP aux I2C registration into tc_aux_link_setup()
This bit of code is (e)DP and aux I2C link specific, move it into
tc_aux_link_setup() to permit cleaner addition of DSI-to-DPI mode.
No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-8-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:10 +0000 (10:50 +0200)]
drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. In order to support the rest of the modes without
making the tc_probe() overly long, split the bridge endpoint parsing
into dedicated function, where the necessary logic to detect the bridge
mode based on which endpoints are connected, can be implemented.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-7-marex@denx.de
Implement .atomic_check callback which prevents user space from setting
unsupported mode. The tc_edp_common_atomic_check() variant is already
prepared for DSI-to-DPI mode addition, which has different frequency
limits.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-6-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:08 +0000 (10:50 +0200)]
drm/bridge: tc358767: Convert to atomic ops
Use the atomic version of the enable/disable operations to continue the
transition to the atomic API. This will be needed to access the mode
from the atomic state.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-5-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:07 +0000 (10:50 +0200)]
drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific functions
These functions are specific to (e)DP output initialization and
operation, add specific tc_edp_ prefix to those functions to
discern them from DPI output functions that will be added later
in this series. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-4-marex@denx.de
It is necessary to specify the number of connected/used DSI data lanes when
using the DSI input port of this bridge. Document the 'data-lanes' property
of the DSI input port.
Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-3-marex@denx.de
Marek Vasut [Tue, 29 Mar 2022 08:50:05 +0000 (10:50 +0200)]
dt-bindings: display: bridge: tc358867: Document DPI output support
The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Document support for the
DPI output port, which can now be connected both as input and output.
Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-2-marex@denx.de
The invalid EDID block filtering uses the number of valid EDID
extensions instead of all EDID extensions for looping the extensions in
the copy. This is fine, by coincidence, if all the invalid blocks are at
the end of the EDID. However, it's completely broken if there are
invalid extensions in the middle; the invalid blocks are included and
valid blocks are excluded.
Fix it by modifying the base block after, not before, the copy.
Maxime Ripard [Mon, 28 Mar 2022 12:43:02 +0000 (14:43 +0200)]
drm/atomic: Add atomic_print_state to private objects
A number of drivers (amdgpu, komeda, vc4, etc.) leverage the
drm_private_state structure, but we don't have any infrastructure to
provide debugging like we do for the other components state. Let's add
an atomic_print_state hook to be consistent.
Maxime Ripard [Mon, 28 Mar 2022 12:43:01 +0000 (14:43 +0200)]
drm/atomic: Print the state every non-blocking commit
The DRM_UT_STATE controls whether we're calling
drm_atomic_print_new_state() whenever a new state is committed. However,
that call is made in the drm_mode_atomic_ioctl(), whereas we have
multiple users of the drm_atomic_commit() function in the kernel
(framebuffer emulation, drm_atomic_helper_dirtyfb, etc.).
This leads to multiple states being committed but never actually
displayed even though we asked to have verbose atomic state debugging.
Let's move the call to drm_atomic_print_new_state() to
drm_atomic_commit() to make sure we don't miss any. Non-blocking commits
were never logged though, and it would create too much churn in the logs
to do so, so leave them out for now.
Two digits are swapped in the AUO B133UAN01 panel id (0x8495 instead
of 0x8594). This went initially unnoticed because the panel is still
detected, though it is set up with a conservative default timing. Fix
the digit swap.
Jani Nikula [Mon, 28 Mar 2022 14:34:22 +0000 (17:34 +0300)]
drm/edid: don't modify EDID while parsing
We'll want to keep the EDID immutable while parsing. Stop modifying the
EDID because of the quirks.
In theory, this does have userspace implications, but the userspace is
supposed to use the modes exposed via KMS API, not by parsing the EDID
directly.
Xiaomeng Tong [Sun, 27 Mar 2022 06:15:16 +0000 (14:15 +0800)]
tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator
The bug is here:
if (!encoder) {
The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.
Xiaomeng Tong [Sun, 27 Mar 2022 05:20:28 +0000 (13:20 +0800)]
gma500: fix an incorrect NULL check on list iterator
The bug is here:
return crtc;
The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.
To fix the bug, return 'crtc' when found, otherwise return NULL.
Christian König [Mon, 24 Jan 2022 10:07:15 +0000 (11:07 +0100)]
drm/ttm: rework bulk move handling v5
Instead of providing the bulk move structure for each LRU update set
this as property of the BO. This should avoid costly bulk move rebuilds
with some games under RADV.
v2: some name polishing, add a few more kerneldoc words.
v3: add some lockdep
v4: fix bugs, handle pin/unpin as well
v5: improve kerneldoc
Xiaomeng Tong [Sun, 27 Mar 2022 07:39:25 +0000 (15:39 +0800)]
drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iterator
The bug is here:
return encoder;
The list iterator value 'encoder' will *always* be set and non-NULL
by drm_for_each_encoder_mask(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element found.
Otherwise it will bypass some NULL checks and lead to invalid memory
access passing the check.
To fix this bug, just return 'encoder' when found, otherwise return
NULL.
Christian König [Fri, 16 Jul 2021 12:00:10 +0000 (14:00 +0200)]
drm/ttm: move the LRU into resource handling v4
This way we finally fix the problem that new resource are
not immediately evict-able after allocation.
That has caused numerous problems including OOM on GDS handling
and not being able to use TTM as general resource manager.
v2: stop assuming in ttm_resource_fini that res->bo is still valid.
v3: cleanup kerneldoc, add more lockdep annotation
v4: consistently use res->num_pages
Xin Ji [Tue, 22 Mar 2022 08:02:12 +0000 (16:02 +0800)]
drm/bridge: anx7625: Set downstream sink into normal status
As downstream sink was set into standby mode while bridge disabled,
this patch used for setting downstream sink into normal status
while enable bridge.
Ivaylo Dimitrov [Wed, 19 Jan 2022 10:23:11 +0000 (12:23 +0200)]
drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILER
On devices with DMM, all allocations are done through either DMM or TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is that
with time DMM/TILER space gets fragmented to the point that even if we have
enough free DMM/TILER space and free memory, allocation fails because there
is no big enough free block in DMM/TILER space.
Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.
Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.
Ivaylo Dimitrov [Wed, 19 Jan 2022 10:23:10 +0000 (12:23 +0200)]
drm: omapdrm: Support exporting of non-contiguous GEM BOs
Currently code allocates non-scanout BOs from SHMEM and those objects are
accessible to userspace by mmap(). However, on devices with no DMM (like
OMAP3), the same objects are not accessible by kernel drivers that want to
render to them as code refuses to export them. In turn this means that on
devices with no DMM, all buffers must be allocated as scanout, otherwise
only CPU can access them. On those devices, scanout buffers are allocated
from CMA, making those allocations highly unreliable.
Fix that by implementing functionality to export SHMEM backed buffers on
devices with no DMM. This makes CMA memory only being used when needed,
instead for every buffer that has to be off-CPU rendered.
Cong Liu [Thu, 24 Mar 2022 10:49:28 +0000 (18:49 +0800)]
drm/qxl: fix qxl can't use in arm64
qxl use ioremap to map ram_header and rom, in the arm64 implementation,
the device is mapped as DEVICE_nGnRE, it can not support unaligned
access. and qxl is a virtual device, it can be treated more like RAM
than actual MMIO registers. use ioremap_wc() replace it.
Rob Clark [Sat, 19 Feb 2022 17:03:01 +0000 (09:03 -0800)]
drm/virtio: Remove restriction of non-zero blob_flags
With native userspace drivers in guest, a lot of GEM objects need to be
neither shared nor mappable. And in fact making everything mappable
and/or sharable results in unreasonably high fd usage in host VMM.
Maxime Ripard [Tue, 22 Feb 2022 16:40:41 +0000 (17:40 +0100)]
drm/vc4: hdmi: Always try to have the highest bpc
Currently we take the max_bpc property as the bpc value and do not try
anything else.
However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.
Maxime Ripard [Tue, 22 Feb 2022 16:40:40 +0000 (17:40 +0100)]
drm/vc4: hdmi: Take bpp into account for the scrambler
The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.
Let's leverage the new function to compute the clock rate in the
scrambler setup code.
Maxime Ripard [Tue, 22 Feb 2022 16:40:38 +0000 (17:40 +0100)]
drm/vc4: hdmi: Move clock calculation into its own function
The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.
YueHaibing [Thu, 17 Mar 2022 09:47:24 +0000 (17:47 +0800)]
drm/bridge: it6505: Fix build error
If DRM_ITE_IT6505 is y but DRM_DP_HELPER is m, building failed:
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_i2c_remove':
ite-it6505.c:(.text+0x35c): undefined reference to `drm_dp_aux_unregister'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_read':
ite-it6505.c:(.text+0x420): undefined reference to `drm_dp_dpcd_read'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_get_dpcd':
ite-it6505.c:(.text+0x4a4): undefined reference to `drm_dp_dpcd_read'
drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_write':
ite-it6505.c:(.text+0x52c): undefined reference to `drm_dp_dpcd_write'
Select DRM_DP_HELPER for DRM_ITE_IT6505 to fix this.
Christian König [Fri, 24 Sep 2021 08:55:45 +0000 (10:55 +0200)]
dma-buf: add dma_resv_replace_fences v2
This function allows to replace fences from the shared fence list when
we can gurantee that the operation represented by the original fence has
finished or no accesses to the resources protected by the dma_resv
object any more when the new fence finishes.
Then use this function in the amdkfd code when BOs are unmapped from the
process.
Christian König [Wed, 22 Sep 2021 11:01:04 +0000 (13:01 +0200)]
RDMA: use dma_resv_wait() instead of extracting the fence
Use dma_resv_wait() instead of extracting the exclusive fence and
waiting on it manually.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Maor Gottlieb <maorg@nvidia.com> Cc: Gal Pressman <galpress@amazon.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-4-christian.koenig@amd.com
Christian König [Wed, 3 Nov 2021 08:34:29 +0000 (09:34 +0100)]
drm/etnaviv: stop using dma_resv_excl_fence v2
We can get the excl fence together with the shared ones as well.
v2: rename the member to fences as well
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-5-christian.koenig@amd.com
Ville Syrjälä [Fri, 18 Feb 2022 10:03:57 +0000 (12:03 +0200)]
drm/tilcdc: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
Ville Syrjälä [Fri, 18 Feb 2022 10:03:48 +0000 (12:03 +0200)]
drm/gma500: Use drm_mode_copy()
struct drm_display_mode embeds a list head, so overwriting
the full struct with another one will corrupt the list
(if the destination mode is on a list). Use drm_mode_copy()
instead which explicitly preserves the list head of
the destination mode.
Even if we know the destination mode is not on any list
using drm_mode_copy() seems decent as it sets a good
example. Bad examples of not using it might eventually
get copied into code where preserving the list head
actually matters.
Obviously one case not covered here is when the mode
itself is embedded in a larger structure and the whole
structure is copied. But if we are careful when copying
into modes embedded in structures I think we can be a
little more reassured that bogus list heads haven't been
propagated in.
@is_mode_copy@
@@
drm_mode_copy(...)
{
...
}
@depends on !is_mode_copy@
struct drm_display_mode *mode;
expression E, S;
@@
(
- *mode = E
+ drm_mode_copy(mode, &E)
|
- memcpy(mode, E, S)
+ drm_mode_copy(mode, E)
)
@depends on !is_mode_copy@
struct drm_display_mode mode;
expression E;
@@
(
- mode = E
+ drm_mode_copy(&mode, &E)
|
- memcpy(&mode, E, S)
+ drm_mode_copy(&mode, E)
)
Zack Rusin [Fri, 18 Mar 2022 17:43:31 +0000 (13:43 -0400)]
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
With very limited vram on svga3 it's difficult to handle all the surface
migrations. Without gbobjects, i.e. the ability to store surfaces in
guest mobs, there's no reason to support intermediate svga2 features,
especially because we can fall back to fb traces and svga3 will never
support those in-between features.
On svga3 we wither want to use fb traces or screen targets
(i.e. gbobjects), nothing in between. This fixes presentation on a lot
of fusion/esxi tech previews where the exposed svga3 caps haven't been
finalized yet.
projects / kernel.git / log