Paolo Bonzini [Tue, 23 Nov 2021 00:43:10 +0000 (19:43 -0500)]
KVM: x86: check PIR even for vCPUs with disabled APICv
The IRTE for an assigned device can trigger a POSTED_INTR_VECTOR even
if APICv is disabled on the vCPU that receives it. In that case, the
interrupt will just cause a vmexit and leave the ON bit set together
with the PIR bit corresponding to the interrupt.
Right now, the interrupt would not be delivered until APICv is re-enabled.
However, fixing this is just a matter of always doing the PIR->IRR
synchronization, even if the vCPU has temporarily disabled APICv.
This is not a problem for performance, or if anything it is an
improvement. First, in the common case where vcpu->arch.apicv_active is
true, one fewer check has to be performed. Second, static_call_cond will
elide the function call if APICv is not present or disabled. Finally,
in the case for AMD hardware we can remove the sync_pir_to_irr callback:
it is only needed for apic_has_interrupt_for_ppr, and that function
already has a fallback for !APICv.
Cc: stable@vger.kernel.org Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-4-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 Nov 2021 00:43:09 +0000 (19:43 -0500)]
KVM: VMX: prepare sync_pir_to_irr for running with APICv disabled
If APICv is disabled for this vCPU, assigned devices may still attempt to
post interrupts. In that case, we need to cancel the vmentry and deliver
the interrupt with KVM_REQ_EVENT. Extend the existing code that handles
injection of L1 interrupts into L2 to cover this case as well.
vmx_hwapic_irr_update is only called when APICv is active so it would be
confusing to add a check for vcpu->arch.apicv_active in there. Instead,
just use vmx_set_rvi directly in vmx_sync_pir_to_irr.
Cc: stable@vger.kernel.org Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: David Matlack <dmatlack@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123004311.2954158-3-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: page_table_test: fix calculation of guest_test_phys_mem
A kvm_page_table_test run with its default settings fails on VMX due to
memory region add failure:
> ==== Test Assertion Failure ====
> lib/kvm_util.c:952: ret == 0
> pid=10538 tid=10538 errno=17 - File exists
> 1 0x00000000004057d1: vm_userspace_mem_region_add at kvm_util.c:947
> 2 0x0000000000401ee9: pre_init_before_test at kvm_page_table_test.c:302
> 3 (inlined by) run_test at kvm_page_table_test.c:374
> 4 0x0000000000409754: for_each_guest_mode at guest_modes.c:53
> 5 0x0000000000401860: main at kvm_page_table_test.c:500
> 6 0x00007f82ae2d8554: ?? ??:0
> 7 0x0000000000401894: _start at ??:?
> KVM_SET_USER_MEMORY_REGION IOCTL failed,
> rc: -1 errno: 17
> slot: 1 flags: 0x0
> guest_phys_addr: 0xc0000000 size: 0x40000000
This is because the memory range that this test is trying to add
(0x0c0000000 - 0x100000000) conflicts with LAPIC mapping at 0x0fee00000.
Looking at the code it seems that guest_test_*phys*_mem variable gets
mistakenly overwritten with guest_test_*virt*_mem while trying to adjust
the former for alignment.
With the correct variable adjusted this test runs successfully.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <52e487458c3172923549bbcf9dfccfbe6faea60b.1637940473.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Handle "default" period when selectively waking kthread
Account for the '0' being a default, "let KVM choose" period, when
determining whether or not the recovery worker needs to be awakened in
response to userspace reducing the period. Failure to do so results in
the worker not being awakened properly, e.g. when changing the period
from '0' to any small-ish value.
Fixes: b7854c3871a2 ("kvm: x86: mmu: Make NX huge page recovery period configurable") Cc: stable@vger.kernel.org Cc: Junaid Shahid <junaids@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120015706.3830341-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the "flush" param and return values to/from the TDP MMU's helper for
zapping collapsible SPTEs. Because the helper runs with mmu_lock held
for read, not write, it uses tdp_mmu_zap_spte_atomic(), and the atomic
zap handles the necessary remote TLB flush.
Similarly, because mmu_lock is dropped and re-acquired between zapping
legacy MMUs and zapping TDP MMUs, kvm_mmu_zap_collapsible_sptes() must
handle remote TLB flushes from the legacy MMU before calling into the TDP
MMU.
Fixes: 86c57da6d9cef ("KVM: x86/mmu: Skip rmap operations if rmaps not allocated") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120045046.3940942-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Use yield-safe TDP MMU root iter in MMU notifier unmapping
Use the yield-safe variant of the TDP MMU iterator when handling an
unmapping event from the MMU notifier, as most occurences of the event
allow yielding.
Fixes: 31000f45aaa8 ("KVM: x86/mmu: Allow yielding during MMU notifier unmap/zap, if possible") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211120015008.3780032-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Wed, 24 Nov 2021 12:20:46 +0000 (20:20 +0800)]
KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()
INVLPG operates on guest virtual address, which are represented by
vcpu->arch.walk_mmu. In nested virtualization scenarios,
kvm_mmu_invlpg() was using the wrong MMU structure; if L2's invlpg were
emulated by L0 (in practice, it hardly happen) when nested two-dimensional
paging is enabled, the call to ->tlb_flush_gva() would be skipped and
the hardware TLB entry would not be invalidated.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-5-jiangshanlai@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Wed, 24 Nov 2021 12:20:43 +0000 (20:20 +0800)]
KVM: X86: Fix when shadow_root_level=5 && guest root_level<4
If the is an L1 with nNPT in 32bit, the shadow walk starts with
pae_root.
Fixes: 55b25285d7b0 ("KVM: x86/mmu: Support shadowing NPT when 5-level paging is enabled in host) Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-2-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 23 Nov 2021 13:59:53 +0000 (14:59 +0100)]
KVM: selftests: Make sure kvm_create_max_vcpus test won't hit RLIMIT_NOFILE
With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:
# ./kvm_create_max_vcpus
KVM_CAP_MAX_VCPU_ID: 4096
KVM_CAP_MAX_VCPUS: 1024
Testing creating 1024 vCPUs, with IDs 0...1023.
/dev/kvm not available (errno: 24), skipping test
Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo] Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Mon, 22 Nov 2021 17:58:18 +0000 (18:58 +0100)]
KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN
Commit 5ee46e657560 ("KVM: x86: Alert userspace that KVM_SET_CPUID{,2}
after KVM_RUN is broken") officially deprecated KVM_SET_CPUID{,2} ioctls
after first successful KVM_RUN and promissed to make this sequence forbiden
in 5.16. It's time to fulfil the promise.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211122175818.608220-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Mon, 22 Nov 2021 17:58:17 +0000 (18:58 +0100)]
KVM: selftests: Avoid KVM_SET_CPUID2 after KVM_RUN in hyperv_features test
hyperv_features's sole purpose is to test access to various Hyper-V MSRs
and hypercalls with different CPUID data. As KVM_SET_CPUID2 after KVM_RUN
is deprecated and soon-to-be forbidden, avoid it by re-creating test VM
for each sub-test.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211122175818.608220-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: Emulate guest TLB flush on nested VM-Enter with new vpid12
Fully emulate a guest TLB flush on nested VM-Enter which changes vpid12,
i.e. L2's VPID, instead of simply doing INVVPID to flush real hardware's
TLB entries for vpid02. From L1's perspective, changing L2's VPID is
effectively a TLB flush unless "hardware" has previously cached entries
for the new vpid12. Because KVM tracks only a single vpid12, KVM doesn't
know if the new vpid12 has been used in the past and so must treat it as
a brand new, never been used VPID, i.e. must assume that the new vpid12
represents a TLB flush from L1's perspective.
For example, if L1 and L2 share a CR3, the first VM-Enter to L2 (with a
VPID) is effectively a TLB flush as hardware/KVM has never seen vpid12
and thus can't have cached entries in the TLB for vpid12.
Reported-by: Lai Jiangshan <jiangshanlai+lkml@gmail.com> Fixes: f68557d26e2f ("KVM: nVMX: nested VPID emulation") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: Abide to KVM_REQ_TLB_FLUSH_GUEST request on nested vmentry/vmexit
Like KVM_REQ_TLB_FLUSH_CURRENT, the GUEST variant needs to be serviced at
nested transitions, as KVM doesn't track requests for L1 vs L2. E.g. if
there's a pending flush when a nested VM-Exit occurs, then the flush was
requested in the context of L2 and needs to be handled before switching
to L1, otherwise the flush for L2 would effectiely be lost.
Opportunistically add a helper to handle CURRENT and GUEST as a pair, the
logic for when they need to be serviced is identical as both requests are
tied to L1 vs. L2, the only difference is the scope of the flush.
Reported-by: Lai Jiangshan <jiangshanlai+lkml@gmail.com> Fixes: 5cb556ac5073 ("KVM: nVMX: Sync all PGDs on nested transition with shadow paging") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST
Flush the current VPID when handling KVM_REQ_TLB_FLUSH_GUEST instead of
always flushing vpid01. Any TLB flush that is triggered when L2 is
active is scoped to L2's VPID (if it has one), e.g. if L2 toggles CR4.PGE
and L1 doesn't intercept PGE writes, then KVM's emulation of the TLB
flush needs to be applied to L2's VPID.
Reported-by: Lai Jiangshan <jiangshanlai+lkml@gmail.com> Fixes: 5cb556ac5073 ("KVM: nVMX: Sync all PGDs on nested transition with shadow paging") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The capability, albeit present, was never exposed via KVM_CHECK_EXTENSION.
Fixes: 0f9a534d193e ("KVM: SEV: Add support for SEV intra host migration") Cc: Peter Gonda <pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 17 Nov 2021 12:35:44 +0000 (07:35 -0500)]
KVM: x86: ignore APICv if LAPIC is not enabled
Synchronize the two calls to kvm_x86_sync_pir_to_irr. The one
in the reenter-guest fast path invoked the callback unconditionally
even if LAPIC is present but disabled. In this case, there are
no interrupts to deliver, and therefore posted interrupts can
be ignored.
Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 22 Nov 2021 23:24:01 +0000 (18:24 -0500)]
KVM: downgrade two BUG_ONs to WARN_ON_ONCE
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached
and kvm_write_guest_offset_cached must expect the read/write to fail, and
therefore it is possible to just return early with an error value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 22 Nov 2021 23:20:16 +0000 (18:20 -0500)]
KVM: VMX: do not use uninitialized gfn_to_hva_cache
An uninitialized gfn_to_hva_cache has ghc->len == 0, which causes
the accessors to croak very loudly. While a BUG_ON is definitely
_too_ loud and a bug on its own, there is indeed an issue of using
the caches in such a way that they could not have been initialized,
because ghc->gpa == 0 might match and thus kvm_gfn_to_hva_cache_init
would not be called.
For the vmcs12_cache, the solution is simply to invoke
kvm_gfn_to_hva_cache_init unconditionally: we already know
that the cache does not match the current VMCS pointer.
For the shadow_vmcs12_cache, there is no similar condition
that checks the VMCS link pointer, so invalidate the cache
on VMXON.
Fixes: 7f3c7d987df7 ("KVM: nVMX: Use a gfn_to_hva_cache for vmptrld") Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reported-by: syzbot+7b7db8bb4db6fd5e157b@syzkaller.appspotmail.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Catalin Marinas [Thu, 25 Nov 2021 15:20:14 +0000 (15:20 +0000)]
KVM: arm64: Avoid setting the upper 32 bits of TCR_EL2 and CPTR_EL2 to 1
Having a signed (1 << 31) constant for TCR_EL2_RES1 and CPTR_EL2_TCPAC
causes the upper 32-bit to be set to 1 when assigning them to a 64-bit
variable. Bit 32 in TCR_EL2 is no longer RES0 in ARMv8.7: with FEAT_LPA2
it changes the meaning of bits 49:48 and 9:8 in the stage 1 EL2 page
table entries. As a result of the sign-extension, a non-VHE kernel can
no longer boot on a model with ARMv8.7 enabled.
CPTR_EL2 still has the top 32 bits RES0 but we should preempt any future
problems
Make these top bit constants unsigned as per commit 715714431812
("arm64: KVM: Avoid setting the upper 32 bits of VTCR_EL2 to 1").
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Chris January <Chris.January@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20211125152014.2806582-1-catalin.marinas@arm.com
Marc Zyngier [Tue, 16 Nov 2021 12:39:35 +0000 (12:39 +0000)]
KVM: arm64: Move pkvm's special 32bit handling into a generic infrastructure
Protected KVM is trying to turn AArch32 exceptions into an illegal
exception entry. Unfortunately, it does that in a way that is a bit
abrupt, and too early for PSTATE to be available.
Instead, move it to the fixup code, which is a more reasonable place
for it. This will also be useful for the NV code.
Reviewed-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
Marc Zyngier [Tue, 16 Nov 2021 10:20:06 +0000 (10:20 +0000)]
KVM: arm64: Save PSTATE early on exit
In order to be able to use primitives such as vcpu_mode_is_32bit(),
we need to synchronize the guest PSTATE. However, this is currently
done deep into the bowels of the world-switch code, and we do have
helpers evaluating this much earlier (__vgic_v3_perform_cpuif_access
and handle_aarch32_guest, for example).
Move the saving of the guest pstate into the early fixups, which
cures the first issue. The second one will be addressed separately.
Anup Patel [Wed, 17 Nov 2021 05:00:29 +0000 (10:30 +0530)]
RISC-V: KVM: Fix incorrect KVM_MAX_VCPUS value
The KVM_MAX_VCPUS value is supposed to be aligned with number of
VMID bits in the hgatp CSR but the current KVM_MAX_VCPUS value
is aligned with number of ASID bits in the satp CSR.
KVM: RISC-V: Unmap stage2 mapping when deleting/moving a memslot
Unmap stage2 page tables when a memslot is being deleted or moved. It's
the architectures' responsibility to ensure existing mappings are removed
when kvm_arch_flush_shadow_memslot() returns.
Linus Torvalds [Sun, 21 Nov 2021 19:25:19 +0000 (11:25 -0800)]
Merge tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Move the command line preparation and the early command line parsing
earlier so that the command line parameters which affect
early_reserve_memory(), e.g. efi=nosftreserve, are taken into
account. This was broken when the invocation of
early_reserve_memory() was moved recently.
- Use an atomic type for the SGX page accounting, which is read and
written locklessly, to plug various race conditions related to it.
* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Fix free page accounting
x86/boot: Pull up cmdline preparation and early param parsing
Linus Torvalds [Sun, 21 Nov 2021 19:17:50 +0000 (11:17 -0800)]
Merge tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Remove unneded PEBS disabling when taking LBR snapshots to prevent an
unchecked MSR access error.
- Fix IIO event constraints for Snowridge and Skylake server chips.
* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Fix snapshot_branch_stack warning in VM
perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
Linus Torvalds [Sun, 21 Nov 2021 18:26:35 +0000 (10:26 -0800)]
Merge tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
- Fix a bug in copying of sigset_t for 32-bit systems, which caused X
to not start.
- Fix handling of shared LSIs (rare) with the xive interrupt controller
(Power9/10).
- Fix missing TOC setup in some KVM code, which could result in oopses
depending on kernel data layout.
- Fix DMA mapping when we have persistent memory and only one DMA
window available.
- Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
recent fix.
- A couple of other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.
* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Change IRQ domain to a tree domain
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
powerpc/signal32: Fix sigset_t copy
powerpc/book3e: Fix TLBCAM preset at boot
powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
powerpc/pseries/ddw: simplify enable_ddw()
powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
powerpc/pseries: Fix numa FORM2 parsing fallback code
powerpc/pseries: rename numa_dist_table to form2_distances
powerpc: clean vdso32 and vdso64 directories
powerpc/83xx/mpc8349emitx: Drop unused variable
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
Linus Torvalds [Sat, 20 Nov 2021 21:17:24 +0000 (13:17 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: ipc, hexagon, mm (swap,
slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
proc/vmcore: fix clearing user buffer by properly using clear_user()
kmap_local: don't assume kmap PTEs are linear arrays in memory
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
kasan: test: silence intentional read overflow warnings
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
hugetlb: fix hugetlb cgroup refcounting during mremap
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: ignore vmlinux.lds
hexagon: clean up timer-regs.h
hexagon: export raw I/O routines for modules
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
shm: extend forced shm destroy to support objects from several IPC nses
ipc: WARN if trying to remove ipc object which is absent
mm/swap.c:put_pages_list(): reinitialise the page list
Linus Torvalds [Sat, 20 Nov 2021 19:05:10 +0000 (11:05 -0800)]
Merge tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Flip a cap check to avoid a selinux error (Alistair)
- Fix for a regression this merge window where we can miss a queue ref
put (me)
- Un-mark pstore-blk as broken, as the condition that triggered that
change has been rectified (Kees)
- Queue quiesce and sync fixes (Ming)
- FUA insertion fix (Ming)
- blk-cgroup error path put fix (Yu)
* tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block:
blk-mq: don't insert FUA request with data into scheduler queue
blk-cgroup: fix missing put device in error path from blkg_conf_pref()
block: avoid to quiesce queue in elevator_init_mq
Revert "mark pstore-blk as broken"
blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
block: fix missing queue put in error path
block: Check ADMIN before NICE for IOPRIO_CLASS_RT
Linus Torvalds [Sat, 20 Nov 2021 18:59:03 +0000 (10:59 -0800)]
Merge tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
merging through my tree.
One item stand out and that is that I delete the <linux/sdb.h> header
that is used by nothing. I deleted this subsystem (through the GPIO
tree) a while back so I feel responsible for tidying up the floor.
Other than that it is the usual mistakes, a bit noisy around build
issue and Kconfig then driver fixes.
Specifics:
- Fix some stubs causing compile issues for ACPI.
- Fix some wakeups on AMD IRQs shared between GPIO and SCI.
- Fix a build warning in the Tegra driver.
- Fix a Kconfig issue in the Qualcomm driver.
- Add a missing include the RALink driver.
- Return a valid type for the Apple pinctrl IRQs.
- Implement some Qualcomm SDM845 dual-edge errata.
- Remove the unused <linux/sdb.h> header. (The subsystem was once
deleted by the pinctrl maintainer...)
- Fix a duplicate initialized in the Tegra driver.
- Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"
* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sm8350: Correct UFS and SDC offsets
pinctrl: tegra194: remove duplicate initializer again
Remove unused header <linux/sdb.h>
pinctrl: qcom: sdm845: Enable dual edge errata
pinctrl: apple: Always return valid type in apple_gpio_irq_type
pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
pinctrl: amd: Fix wakeups when IRQ is shared with SCI
ACPI: Add stubs for wakeup handler functions
Linus Torvalds [Sat, 20 Nov 2021 18:55:50 +0000 (10:55 -0800)]
Merge tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
Linus Torvalds [Sat, 20 Nov 2021 18:47:16 +0000 (10:47 -0800)]
Merge tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes: two to address minor coverity issues and
one cleanup"
* tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: introduce cifs_ses_mark_for_reconnect() helper
cifs: protect srv_count with cifs_tcp_ses_lock
cifs: move debug print out of spinlock
proc/vmcore: fix clearing user buffer by properly using clear_user()
To clear a user buffer we cannot simply use memset, we have to use
clear_user(). With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":
Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access. In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().
To fix, properly use clear_user() when we're dealing with a user buffer.
Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com Fixes: 82d4a6064479 ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Philipp Rudo <prudo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Sat, 20 Nov 2021 00:43:55 +0000 (16:43 -0800)]
kmap_local: don't assume kmap PTEs are linear arrays in memory
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/ Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org Fixes: da6106dc7516 ("ARM: highmem: Switch to generic kmap atomic") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reported-by: Quanyang Wang <quanyang.wang@windriver.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Sat, 20 Nov 2021 00:43:52 +0000 (16:43 -0800)]
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and
dbgfs_dirs using damon_dbgfs_lock. However, some of the code is
accessing the variables without the protection. This fixes it by
protecting all such accesses.
Link: https://lkml.kernel.org/r/20211110145758.16558-3-sj@kernel.org Fixes: fff6736ab5ad ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Sat, 20 Nov 2021 00:43:49 +0000 (16:43 -0800)]
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
Patch series "DAMON fixes".
This patch (of 2):
DAMON users can trigger below warning in '__alloc_pages()' by invoking
write() to some DAMON debugfs files with arbitrarily high count
argument, because DAMON debugfs interface allocates some buffers based
on the user-specified 'count'.
As done in commit 6b9de5843a08 ("kasan: test: bypass __alloc_size
checks") for __write_overflow warnings, also silence some more cases
that trip the __read_overflow warnings seen in 5.16-rc1[1]:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:10,
from include/linux/cpumask.h:12,
from include/linux/mm_types_task.h:14,
from include/linux/mm_types.h:5,
from include/linux/page-flags.h:13,
from arch/arm64/include/asm/mte.h:14,
from arch/arm64/include/asm/pgtable.h:12,
from include/linux/pgtable.h:6,
from include/linux/kasan.h:29,
from lib/test_kasan.c:10:
In function 'memcmp',
inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2:
include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
263 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
In function 'memchr',
inlined from 'kasan_memchr' at lib/test_kasan.c:872:2:
include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
277 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
Mina Almasry [Sat, 20 Nov 2021 00:43:43 +0000 (16:43 -0800)]
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.
We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.
Link: https://lkml.kernel.org/r/20211117193825.378528-1-almasrymina@google.com Fixes: 95f09137f9bd ("hugetlb: don't pass page cache pages to restore_reserve_on_error") Signed-off-by: Mina Almasry <almasrymina@google.com> Reported-by: James Houghton <jthoughton@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Wei Xu <weixugc@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlb: fix hugetlb cgroup refcounting during mremap
When hugetlb_vm_op_open() is called during copy_vma(), we may take the
reference to resv_map->css. Later, when clearing the reservation
pointer of old_vma after transferring it to new_vma, we forget to drop
the reference to resv_map->css. This leads to a reference leak of css.
Fixes this by adding a check to drop reservation css reference in
clear_vma_resv_huge_pages()
Link: https://lkml.kernel.org/r/20211113154412.91134-1-minhquangbui99@gmail.com Fixes: b5baa59aa48dc9 ("mm, hugepages: add mremap() support for hugepage backed vma") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rustam Kovhaev [Sat, 20 Nov 2021 00:43:37 +0000 (16:43 -0800)]
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.
kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.
Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB
Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com Fixes: 1d0a799d5e60 ("slab: Ignore internal flags in cache creation") Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Glauber Costa <glommer@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The values in this header are only used in one file each, if they are
used at all. Remove the header and sink all of the constants into their
respective files.
TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h
TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.
SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit ced8b2ca1359 ("Hexagon: Add time and timer
functions").
TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.
Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.org Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Brian Cain <bcain@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yunfeng Ye [Sat, 20 Nov 2021 00:43:25 +0000 (16:43 -0800)]
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
After the memory is freed, it can be immediately allocated by other
CPUs, before the "free" trace report has been emitted. This causes
inaccurate traces.
For example, if the following sequence of events occurs:
shm: extend forced shm destroy to support objects from several IPC nses
Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.
This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).
This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.
To achieve that we do several things:
1. add a namespace (non-refcounted) pointer to the struct shmid_kernel
2. during new shm object creation (newseg()/shmget syscall) we
initialize this pointer by current task IPC ns
3. exit_shm() fully reworked such that it traverses over all shp's in
task->sysvshm.shm_clist and gets IPC namespace not from current task
as it was before but from shp's object itself, then call
shm_destroy(shp, ns).
Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".
Q/A
Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
lifetime, so, if we get shp object from the task->sysvshm.shm_clist
while holding task_lock(task) nobody can steal our namespace.
Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
namespace without getting task->sysvshm.shm_clist list cleaned up.
Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com Fixes: 63780930696 ("shm: make exit_shm work proportional to task activity") Co-developed-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Andrei Vagin <avagin@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc: WARN if trying to remove ipc object which is absent
Patch series "shm: shm_rmid_forced feature fixes".
Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily. After some
investigation I've constructed the minimal reproducer. It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.
The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces. In most cases this list will contain only
items from one IPC namespace.
How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace. But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.
The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change. So, I gave up on this idea.
The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace. It
means that list corruption may occur.
Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2]. This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.
Thanks to the efforts of Manfred Spraul working an elegant solution was
designed. Thanks a lot, Manfred!
Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists. But there is some extra memory consumption-related
concerns.
An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy"). The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.
This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.
Matthew Wilcox [Sat, 20 Nov 2021 00:43:15 +0000 (16:43 -0800)]
mm/swap.c:put_pages_list(): reinitialise the page list
While free_unref_page_list() puts pages onto the CPU local LRU list, it
does not remove them from the list they were passed in on. That makes
the list_head appear to be non-empty, and would lead to various
corruption problems if we didn't have an assertion that the list was
empty.
Reinitialise the list after calling free_unref_page_list() to avoid this
problem.
Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org Fixes: b742f4e2305c ("mm: optimise put_pages_list()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Steve French <stfrench@microsoft.com> Reported-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Steve French <stfrench@microsoft.com> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Hyeoncheol Lee <hyc.lee@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 19 Nov 2021 22:15:14 +0000 (14:15 -0800)]
Merge tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
- Prevent accesses to unsupported log pages as that causes device scan
failures with LLDDs using libsas (from me).
- A couple of fixes for AMD AHCI adapters handling of low power modes
and resume (from Mario).
- Fix a compilation warning (from me).
* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Declare ata_ncq_sdev_attrs static
ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
ata: libata: add missing ata_identify_page_supported() calls
ata: libata: improve ata_read_log_page() error message
Linus Torvalds [Fri, 19 Nov 2021 21:50:48 +0000 (13:50 -0800)]
Merge tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix double free in destroy_hist_field
- Harden memset() of trace_iterator structure
- Do not warn in trace printk check when test buffer fills up
* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Don't use out-of-sync va_list in event printing
tracing: Use memset_startat() to zero struct trace_iterator
tracing/histogram: Fix UAF in destroy_hist_field()
Linus Torvalds [Fri, 19 Nov 2021 19:40:14 +0000 (11:40 -0800)]
Merge tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have two patches for 5.16:
- allow external modules to be built against read-only source trees
- turn KVM on in the defconfigs
The second one isn't technically a fix, but it got tied up pending
some defconfig cleanups that ended up finding some larger issues. I
figured it'd be better to get the config changes some more testing,
but didn't want to hold up turning KVM on for that"
* tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix building external modules
RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
Linus Torvalds [Fri, 19 Nov 2021 19:33:31 +0000 (11:33 -0800)]
Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
Linus Torvalds [Fri, 19 Nov 2021 19:19:58 +0000 (11:19 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change
to fix a regression in user space device state setting, which is used
by the iscsi daemons to effect device recovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
scsi: ufs: core: Fix another task management completion race
scsi: ufs: core: Fix task management completion timeout race
scsi: core: sysfs: Fix hang when device state is set via sysfs
scsi: iscsi: Unblock session then wake up error handler
scsi: ufs: core: Improve SCSI abort handling
Linus Torvalds [Fri, 19 Nov 2021 19:07:13 +0000 (11:07 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"There are a few big regression items from the merge window suggesting
that people are testing rc1's but not testing the for-next branches:
- Warnings fixes
- Crash in hf1 when creating QPs and setting counters
- Some old mlx4 cards fail to probe due to missing counters
- Syzkaller crash in the new counters code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update for VMware PVRDMA driver
RDMA/nldev: Check stat attribute before accessing it
RDMA/mlx4: Do not fail the registration on port stats
IB/hfi1: Properly allocate rdma counter desc memory
RDMA/core: Set send and receive CQ before forwarding to the driver
RDMA/netlink: Add __maybe_unused to static inline in C file
Linus Torvalds [Fri, 19 Nov 2021 18:50:11 +0000 (10:50 -0800)]
Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This week's fixes, pretty quiet, about right for rc2. amdgpu is the
bulk of them but the scheduler ones have been reported in a few places
I think.
Otherwise just some minor i915 fixes and a few other scattered around:
scheduler:
- two refcounting fixes
cma-helper:
- use correct free path for noncoherent
efifb:
- probing fix
amdgpu:
- Better debugging info for SMU msgs
- Better error reporting when adding IP blocks
- Fix UVD powergating regression on CZ
- Clock reporting fix for navi1x
- OLED panel backlight fix
- Fix scaling on VGA/DVI for non-DC display code
- Fix GLFCLK handling for RGP on some APUs
- fix potential memory leak
* tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/amdgpu: fix potential memleak
drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
drm/amd/display: Fix OLED brightness control on eDP
drm/amd/pm: Remove artificial freq level on Navi1x
drm/amd/pm: avoid duplicate powergate/ungate setting
drm/amdgpu: add error print when failing to add IP block(v2)
drm/amd/pm: Enhanced reporting also for a stuck command
drm/i915/guc: fix NULL vs IS_ERR() checking
drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB
Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
fbdev: Prevent probing generic drivers if a FB is already registered
drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder
drm/scheduler: fix drm_sched_job_add_implicit_dependencies
drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY
drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
Peter Zijlstra [Fri, 19 Nov 2021 09:29:47 +0000 (10:29 +0100)]
x86: Pin task-stack in __get_wchan()
When commit 66afdad75432 ("x86: Fix __get_wchan() for !STACKTRACE")
moved from stacktrace to native unwind_*() usage, the
try_get_task_stack() got lost, leading to use-after-free issues for
dying tasks.
signal: Replace force_fatal_sig with force_exit_sig when in doubt
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: da10aef6fedf ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: ed22ec8b605e ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: da0805d9e4d6 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: d3949f940c71 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: edc3102fdf54 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: 0a5b6342b41e ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 5b7571181958 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: b401927d181b ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 5f32f6142eb6 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
signal: Don't always set SA_IMMUTABLE for forced signals
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.
Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: stable@vger.kernel.org
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: da10aef6fedf ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Ming Lei [Thu, 18 Nov 2021 15:30:41 +0000 (23:30 +0800)]
blk-mq: don't insert FUA request with data into scheduler queue
We never insert flush request into scheduler queue before.
Recently commit fd09e9979ce5 ("blk-mq: don't handle non-flush requests in
blk_insert_flush") tries to handle FUA data request as normal request.
This way has caused warning[1] in mq-deadline dd_exit_sched() or io hang in
case of kyber since RQF_ELVPRIV isn't set for flush request, then
->finish_request won't be called.
Fix the issue by inserting FUA data request with blk_mq_request_bypass_insert()
when the device supports FUA, just like what we did before.
Dave Airlie [Fri, 19 Nov 2021 03:28:54 +0000 (13:28 +1000)]
Merge tag 'drm-misc-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A infoframe corruption fix for nouveau, a wrong free function usage fix
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.
tracing: Don't use out-of-sync va_list in event printing
If trace_seq becomes full, trace_seq_vprintf() no longer consumes
arguments from va_list, making va_list out of sync with format
processing by trace_check_vprintf().
This causes va_arg() in trace_check_vprintf() to return wrong
positional argument, which results into a WARN_ON_ONCE() hit.
ftrace_stress_test from LTP triggers this situation.
Fix it by explicitly avoiding further use if va_list at the point
when it's consistency can no longer be guaranteed.
Kees Cook [Thu, 18 Nov 2021 20:22:17 +0000 (12:22 -0800)]
tracing: Use memset_startat() to zero struct trace_iterator
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() to avoid confusing memset() about writing beyond
the target struct member.
Linus Torvalds [Fri, 19 Nov 2021 01:09:05 +0000 (17:09 -0800)]
Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux
Pull zstd fixes from Nick Terrell:
"Fix stack usage on parisc & improve code size bloat
This contains three commits:
1. Fixes a minor unused variable warning reported by Kernel test
robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance
sensitive workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing
-O3 from zstd's compilation flags. -O3 triggered bugs in the
hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
neutral compression, about -1% decompression speed. We also reduce
code bloat (-105KB / 374KB).
After this our code bloat is cut from 374KB to 105KB with gcc-11. If
we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't
suitable for a quick fix. I've opened an upstream issue [3] to track
the code size, and try to avoid future regressions, and improve it in
the long term"
Linus Torvalds [Thu, 18 Nov 2021 22:52:24 +0000 (14:52 -0800)]
Merge tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the handling of thermal zones during system resume and
disable building of the int340x thermal driver on 32-bit.
Specifics:
- Prevent the previous high and low thermal zone trip values from
being retained over a system suspend-resume cycle (Manaf
Meethalavalappu Pallikunhi)
- Prevent the int340x thermal driver from being built in 32-bit
kernel configurations, because running it on 32-bit is questionable
(Arnd Bergmann)"
* tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Reset previous low and high trip during thermal zone init
thermal: int340x: Limit Kconfig to 64-bit
Linus Torvalds [Thu, 18 Nov 2021 22:46:28 +0000 (14:46 -0800)]
Merge tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a system-wide suspend issue in the DTPM framework and
improve the Energy Model documentation.
Specifics:
- Fix system suspend handling in DTPM when it is enabled, but not
actually used (Daniel Lezcano)
- Describe the new cpufreq callback for Energy Model registration and
explain the "advanced" and "simple" EM variants in the EM
documentation (Lukasz Luba)"
* tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: power: Describe 'advanced' and 'simple' EM models
Documentation: power: Add description about new callback for EM registration
powercap: DTPM: Fix suspend failure and kernel warning
Linus Torvalds [Thu, 18 Nov 2021 22:42:36 +0000 (14:42 -0800)]
Merge tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert the change attempting to release PM resources blocked by unused
ACPI objects after device enumeration, because it caused boot issues
to appear on multiple systems"
* tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Release PM resources blocked by unused objects"
Linus Torvalds [Thu, 18 Nov 2021 22:39:40 +0000 (14:39 -0800)]
Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various build- and bug-fixes as well as one hardware-id addition"
* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
platform/x86: thinkpad_acpi: Add support for dual fan control
platform/x86: think-lmi: Abort probe on analyze failure
platform/x86: dell-wmi-descriptor: disable by default
platform/x86: samsung-laptop: Fix typo in a comment
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
Linus Torvalds [Thu, 18 Nov 2021 22:35:41 +0000 (14:35 -0800)]
Merge tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v5.16, one in the core for an issue with
handling of controller unregistration that was introduced with the
fixes for registering nested SPI controllers and a few more minor
device specific ones"
* tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix use-after-free of the add_lock mutex
spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()
spi: lpspi: Silence error message upon deferred probe
spi: cadence-quadspi: fix write completion support
Nick Terrell [Tue, 16 Nov 2021 23:11:39 +0000 (15:11 -0800)]
lib: zstd: Don't add -O3 to cflags
After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.
I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.
This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:
Nick Terrell [Tue, 16 Nov 2021 04:33:08 +0000 (20:33 -0800)]
lib: zstd: Don't inline functions in zstd_opt.c
`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.
This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.
Nick Terrell [Tue, 16 Nov 2021 03:08:19 +0000 (19:08 -0800)]
lib: zstd: Fix unused variable warning
The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.
This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].
Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.
Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
Linus Torvalds [Thu, 18 Nov 2021 20:41:14 +0000 (12:41 -0800)]
Merge tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several xes and one old ioctl deprecation. Namely there's fix for
crashes/warnings with lzo compression that was suspected to be caused
by first pull merge resolution, but it was a different bug.
Summary:
- regression fix for a crash in lzo due to missing boundary checks of
the page array
- fix crashes on ARM64 due to missing barriers when synchronizing
status bits between work queues
- silence lockdep when reading chunk tree during mount
- fix false positive warning in integrity checker on devices with
disabled write caching
- fix signedness of bitfields in scrub
- start deprecation of balance v1 ioctl"
* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: deprecate BTRFS_IOC_BALANCE ioctl
btrfs: make 1-bit bit-fields of scrub_page unsigned int
btrfs: check-integrity: fix a warning on write caching disabled disk
btrfs: silence lockdep when reading chunk tree during mount
btrfs: fix memory ordering between normal and ordered work functions
btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
Linus Torvalds [Thu, 18 Nov 2021 20:17:33 +0000 (12:17 -0800)]
Merge tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull setattr idmapping fix from Christian Brauner:
"This contains a simple fix for setattr. When determining the validity
of the attributes the ia_{g,u}id fields contain the value that will be
written to inode->i_{g,u}id. When the {g,u}id attribute of the file
isn't altered and the caller's fs{g,u}id matches the current {g,u}id
attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and
will have taken the relevant idmapping into account. So in order to
verify that the {g,u}id attribute isn't changed we simple need to
compare the ia_{g,u}id value against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has
a meaning when circular idmappings are used, i.e. mappings where e.g.
id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such
ciruclar mappings can e.g. be useful when sharing the same home
directory between multiple users at the same time.
Before this patch we could end up denying legitimate attribute changes
and allowing invalid attribute changes when circular mappings are
used. To even get into this situation the caller must've been
privileged both to create that mapping and to create that idmapped
mount.
This hasn't been seen in the wild anywhere but came up when expanding
the fstest suite during work on a series of hardening patches. All
idmapped fstests pass without any regressions and we're adding new
tests to verify the behavior of circular mappings.
Linus Torvalds [Thu, 18 Nov 2021 20:13:24 +0000 (12:13 -0800)]
Merge tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"parisc bug and warning fixes and wire up futex_waitv.
Fix some warnings which showed up with allmodconfig builds, a revert
of a change to the sigreturn trampoline which broke signal handling,
wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig"
* tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig
Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
parisc: Wrap assembler related defines inside __ASSEMBLY__
parisc: Wire up futex_waitv
parisc: Include stringify.h to avoid build error in crypto/api.c
parisc/sticon: fix reverse colors
Linus Torvalds [Thu, 18 Nov 2021 20:05:22 +0000 (12:05 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
Linus Torvalds [Thu, 18 Nov 2021 19:01:06 +0000 (11:01 -0800)]
Merge tag 'docs-5.16-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes for 5.16"
* tag 'docs-5.16-2' of git://git.lwn.net/linux:
Documentation/process: fix a cross reference
Documentation: update vcpu-requests.rst reference
docs: accounting: update delay-accounting.rst reference
libbpf: update index.rst reference
docs: filesystems: Fix grammatical error "with" to "which"
doc/zh_CN: fix a translation error in management-style
docs: ftrace: fix the wrong path of tracefs
Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document
Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375
Documentation: arm: marvell: Add some links to homepage / product infos
docs: Update Sphinx requirements
Kalesh Singh [Thu, 18 Nov 2021 01:15:42 +0000 (17:15 -0800)]
tracing/histogram: Fix UAF in destroy_hist_field()
Calling destroy_hist_field() on an expression will recursively free
any operands associated with the expression. If during expression
parsing the operands of the expression are already set when an error
is encountered, there is no need to explicity free the operands. Doing
so will result in destroy_hist_field() being called twice for the
operands and lead to a use-after-free (UAF) error.
If the operands are associated with the expression, only call
destroy_hist_field() on the expression since the operands will be
recursively freed.
Linus Torvalds [Thu, 18 Nov 2021 18:50:45 +0000 (10:50 -0800)]
Merge tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
Heiko Carstens [Mon, 15 Nov 2021 19:56:14 +0000 (20:56 +0100)]
ftrace/samples: add s390 support for ftrace direct multi sample
Add s390 architecture support for the ftrace direct multi sample.
See commit 8f59ad5c005e ("ftrace/samples: Add multi direct interface
test module") for further details.
Heiko Carstens [Mon, 15 Nov 2021 19:56:13 +0000 (20:56 +0100)]
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
Currently it is not possible to build the ftrace direct multi example
anymore due to broken config dependencies. Fix this by adding
SAMPLE_FTRACE_DIRECT_MULTI config option.
This broke when merging s390-5.16-1 due to an incorrect merge conflict
resolution proposed by me.
Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI
so it matches the module name.
Fixes: c09a55afe3f2 ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux") Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20211115195614.3173346-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
projects / kernel.git / log