Joshua Aberback [Tue, 17 Nov 2020 16:27:33 +0000 (11:27 -0500)]
drm/amd/display: Check link_active instead of lane_settings != unknown
[Why]
enable_link_dp_mst checks that cur_link_settings != unknown to determine
that the link is already enabled, to skip redundant enablement calls for
multiple streams on the same link. During dc_reinitialize_hardware,
cur_link_settings on previously-active links is not cleared, which blocks
MST links from being re-enabled after a reinitialization.
[How]
- check for link_status->link_active instead, as it's the real intent
- clear cur_link_settings when we clear link_active
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Fri, 13 Nov 2020 18:34:55 +0000 (13:34 -0500)]
drm/amd/display: Update dram_clock_change_latency for DCN2.1
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jacky Liao [Fri, 13 Nov 2020 18:13:27 +0000 (13:13 -0500)]
drm/amd/display: Add HDR3DLUT and SHAPER memory shutdown support
[Why]
The HDR3DLUT and SHAPER memory blocks should be powered down when
they're not in use. This will reduce power consumption.
[How]
1. Write to HDR3DLUT_MEM_PWR_FORCE to put memory to shutdown
when HDR3DLUT is not used.
2. Write to SHAPER_MEM_PWR_FORCE to put memory to shutdown
when SHAPER is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <Eric.Bernstein@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Wed, 25 Nov 2020 06:40:51 +0000 (01:40 -0500)]
drm/amdgpu: set LDS_CONFIG=0x20 on VanGogh to fix MGCG hang
Same as Sienna Cichlid and Navy Flounder.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 26 Nov 2020 21:45:59 +0000 (16:45 -0500)]
drm/amd/display: turn DPMS off on connector unplug
[Why&How]
Set dpms off on the connector that was unplugged, for the side effect of
releasing some references held through deallocation of MST payload. This is
the expected behaviour for non MST devices as well.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 26 Nov 2020 14:31:05 +0000 (09:31 -0500)]
drm/amd/display: Clear dc remote sinks on MST disconnect
[Why&How]
Recent changes to upstream mst code remove the callback which
cleared the internal state for mst. Move the missing functionality
that was previously called through the destroy call back for mst connector
destroy
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 25 Nov 2020 14:04:11 +0000 (09:04 -0500)]
drm/amdgpu/vcn3.0: fix compilation warning
Fixed warning: no previous prototype.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stanley.Yang [Fri, 20 Nov 2020 06:14:53 +0000 (14:14 +0800)]
drm/amdgpu: only skip smc sdma sos ta and asd fw in SRIOV for navi12
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta
and asd fw in SRIOV for vega10, so adjust above fw and skip load them
in SRIOV only for navi12.
The struct name smu_state_memroy_block contains a spelling mistake, rename
it to smu_state_memory_block
Fixes: 342ef588d582 ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:19 +0000 (11:19 +0000)]
drm/amd/amdgpu/gmc_v9_0: Suppy some missing function doc descriptions
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:720: warning: Function parameter or member 'vmhub' not described in 'gmc_v9_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'flush_type' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'all_hub' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:16 +0000 (11:19 +0000)]
drm/amd/amdgpu/gmc_v8_0: Fix more issues attributed to copy/paste
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'all_hub' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'vmhub' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:998: warning: Function parameter or member 'pasid' not described in 'gmc_v8_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:15 +0000 (11:19 +0000)]
drm/amd/amdgpu/gmc_v7_0: Add some missing kernel-doc descriptions
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'all_hub' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'vmhub' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:771: warning: Function parameter or member 'pasid' not described in 'gmc_v7_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:13 +0000 (11:19 +0000)]
drm/amd/amdgpu/uvd_v4_2: Add one and remove another function param description
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:12 +0000 (11:19 +0000)]
drm/amd/amdgpu/cik_sdma: Add one and remove another function param description
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:09 +0000 (11:19 +0000)]
drm/amd/include/dimgrey_cavefish_ip_offset: Mark top-level IP_BASE as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/dimgrey_cavefish_reg_init.c:28:
drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:151:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:81:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
81 | static const struct IP_BASE FUSE_BASE = { { { { 0x00017400, 0x02401400, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:74:29: warning: ‘DPCS_BASE’ defined but not used [-Wunused-const-variable=]
74 | static const struct IP_BASE DPCS_BASE = { { { { 0x00000012, 0x000000C0, 0x000034C0, 0x00009000, 0x02403C00, 0 } },
| ^~~~~~~~~
NB: Snipped lots of these
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Jiansong Chen <Jiansong.Chen@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:08 +0000 (11:19 +0000)]
drm/amd/include/vangogh_ip_offset: Mark top-level IP_BASE as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/vangogh_reg_init.c:28:
drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:210:29: warning: ‘USB_BASE’ defined but not used [-Wunused-const-variable=]
210 | static const struct IP_BASE USB_BASE = { { { { 0x0242A800, 0x05B00000, 0, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:202:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
202 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:178:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
178 | static const struct IP_BASE PCIE0_BASE = { { { { 0x00000000, 0x00000014, 0x00000D20, 0x00010400, 0x0241B000, 0x04040000 } },
| ^~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:154:29: warning: ‘MP2_BASE’ defined but not used [-Wunused-const-variable=]
154 | static const struct IP_BASE MP2_BASE = { { { { 0x00016400, 0x02400800, 0x00F40000, 0x00F80000, 0x00FC0000, 0 } },
| ^~~~~~~~
NB: Snipped lots of these
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Huang Rui <ray.huang@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:07 +0000 (11:19 +0000)]
drm/amd/include/sienna_cichlid_ip_offset: Mark top-level IP_BASE as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/sienna_cichlid_reg_init.c:28:
drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:186:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
186 | static const struct IP_BASE USB0_BASE = { { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:179:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:158:29: warning: ‘SDMA1_BASE’ defined but not used [-Wunused-const-variable=]
158 | static const struct IP_BASE SDMA1_BASE = { { { { 0x00001260, 0x0000A000, 0x0001C000, 0x02402C00, 0 } },
| ^~~~~~~~~~
NB: Snipped lots of these
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:06 +0000 (11:19 +0000)]
drm/amd/include/navi12_ip_offset: Mark top-level IP_BASE as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:05 +0000 (11:19 +0000)]
drm/amd/include/navi14_ip_offset: Mark top-level IP_BASE as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:04 +0000 (11:19 +0000)]
drm/amd/include/arct_ip_offset: Mark top-level IP_BASE definition as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=]
227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } },
| ^~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } },
| ^~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } },
| ^~~~~~~~~
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:03 +0000 (11:19 +0000)]
drm/amd/include/navi10_ip_offset: Mark top-level IP_BASE as __maybe_unused
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi10_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:127:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
127 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0, 0, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:109:29: warning: ‘RSMU_BASE’ defined but not used [-Wunused-const-variable=]
109 | static const struct IP_BASE RSMU_BASE = { { { { 0x00012000, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:61:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
61 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:02 +0000 (11:19 +0000)]
drm/amd/include/vega20_ip_offset: Mark top-level IP_BASE definition as __maybe_unused
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable=
154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
Fixes the following W=1 kernel build warning(s):
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:01 +0000 (11:19 +0000)]
drm/amd/amdgpu/dce_v6_0: Fix formatting and missing parameter description issues
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:192: warning: Function parameter or member 'async' not described in 'dce_v6_0_page_flip'
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:1050: warning: Cannot understand *
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:19:00 +0000 (11:19 +0000)]
drm/amd/amdgpu/uvd_v3_1: Fix-up some documentation issues
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'job' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'addr' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'seq' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Excess function parameter 'fence' description in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_fini'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sonny Jiang <sonny.jiang@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:56 +0000 (11:18 +0000)]
drm/amd/amdgpu/gfx_v6_0: Supply description for 'gfx_v6_0_ring_test_ib()'s 'timeout' param
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1903: warning: Function parameter or member 'timeout' not described in 'gfx_v6_0_ring_test_ib'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:55 +0000 (11:18 +0000)]
drm/amd/amdgpu/si_dma: Fix a bunch of function documentation issues
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'addr' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'seq' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'flags' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Excess function parameter 'fence' description in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:252: warning: Function parameter or member 'timeout' not described in 'si_dma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:408: warning: Function parameter or member 'ring' not described in 'si_dma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'vmid' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'pd_addr' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Excess function parameter 'vm' description in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'ib' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'tmz' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Excess function parameter 'ring' description in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Function parameter or member 'ib' not described in 'si_dma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Excess function parameter 'ring' description in 'si_dma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:48 +0000 (11:18 +0000)]
drm/amd/amdgpu/gfx_v7_0: Clean-up a bunch of kernel-doc related issues
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1590: warning: Function parameter or member 'instance' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'se_num' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'sh_per_se' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1852: warning: Excess function parameter 'adev' description in 'DEFAULT_SH_MEM_BASES'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2086: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_test_ring'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'ridx' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'job' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2351: warning: Function parameter or member 'timeout' not described in 'gfx_v7_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'vmid' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'pd_addr' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_vm_flush'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:47 +0000 (11:18 +0000)]
drm/amd/amdgpu/cik_sdma: Supply some missing function param descriptions
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'job' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'addr' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'seq' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:663: warning: Function parameter or member 'timeout' not described in 'cik_sdma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:808: warning: Function parameter or member 'ring' not described in 'cik_sdma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'vmid' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'pd_addr' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Excess function parameter 'vm' description in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'tmz' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:46 +0000 (11:18 +0000)]
drm/amd/amdgpu/dce_v8_0: Supply description for 'async'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:185: warning: Function parameter or member 'async' not described in 'dce_v8_0_page_flip'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:45 +0000 (11:18 +0000)]
drm/amd/amdgpu/uvd_v4_2: Fix some kernel-doc misdemeanours
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'addr' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'seq' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'job' not described in 'uvd_v4_2_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_ib'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:43 +0000 (11:18 +0000)]
drm/amd/amdgpu/amdgpu_virt: Correct possible copy/paste or doc-rot misnaming issue
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_request_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_request_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_release_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_release_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_reset_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_reset_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_wait_reset'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_wait_reset'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_alloc_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_alloc_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_free_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_free_mm_table'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:44 +0000 (11:18 +0000)]
drm/amd/amdgpu/cik_ih: Supply description for 'ih' in 'cik_ih_{get, set}_wptr()'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_ih.c:189: warning: Function parameter or member 'ih' not described in 'cik_ih_get_wptr'
drivers/gpu/drm/amd/amdgpu/cik_ih.c:274: warning: Function parameter or member 'ih' not described in 'cik_ih_set_rptr'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Qinglang Miao <miaoqinglang@huawei.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:42 +0000 (11:18 +0000)]
drm/amd/amdgpu/amdgpu_ib: Provide docs for 'amdgpu_ib_schedule()'s 'job' param
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:127: warning: Function parameter or member 'job' not described in 'amdgpu_ib_schedule'
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Mon, 23 Nov 2020 11:18:40 +0000 (11:18 +0000)]
drm/radeon/radeon_device: Consume our own header where the prototypes are located
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_device.c:637:6: warning: no previous prototype for ‘radeon_device_is_virtual’ [-Wmissing-prototypes]
Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simon Ser [Fri, 20 Nov 2020 20:19:00 +0000 (20:19 +0000)]
drm/amd/display: don't expose rotation prop for cursor plane
Setting any rotation on the cursor plane is ignored by amdgpu.
Because of DCE/DCN design, it's not possible to rotate the cursor.
Instead of displaying the wrong result, stop advertising the rotation
property for the cursor plane.
Now that we check all cursor plane properties in amdgpu_dm_atomic_check,
remove the TODO.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simon Ser [Fri, 20 Nov 2020 20:18:59 +0000 (20:18 +0000)]
drm/amd/display: check cursor scaling
Don't allow user-space to set different scaling parameters for the
cursor plane and for the primary plane. Because of DCE/DCN design,
it's not possible to have a mismatch.
The old check in dm_update_plane_state is superseded by this new
check.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simon Ser [Fri, 20 Nov 2020 20:18:57 +0000 (20:18 +0000)]
drm/amd/display: disallow cropping for cursor plane
Looking at handle_cursor_update, it doesn't seem like src_{x,y,w,h}
are picked up by DC. I also tried to change these parameters via a
test KMS client, and amdgpu ignored them. Instead of displaying the
wrong result, reject the atomic commit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simon Ser [Fri, 20 Nov 2020 20:18:55 +0000 (20:18 +0000)]
drm/amd/display: add cursor FB size check
This patch expands the cursor checks added in "drm/amd/display: add basic
atomic check for cursor plane" to also include a FB size check. Without
this patch, setting a FB smaller than max_cursor_size with an invalid
width would result in amdgpu error messages and a fallback to a 64-byte
width:
[drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN.
Note that DC uses the word "pitch" when actually checking the FB width.
Indeed, the function handle_cursor_update does this:
attributes.pitch = attributes.width;
In my tests, the cursor FB actually had a pitch of 512 bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Camille Cho [Thu, 12 Nov 2020 07:33:19 +0000 (15:33 +0800)]
drm/amd/display: To update backlight restore mechanism
[Why]
Cached backlight is never being updated since panel_cntl specific
registers were moved from abm to panel_cntl.
[How]
Update cached backlight in set_abm_immediate_disable as what we used to
do. Also, update the priority of backlight restore mechanism so that
cached backlight has the highest priority since it is always correct.
Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jacky Liao [Wed, 11 Nov 2020 23:29:42 +0000 (18:29 -0500)]
drm/amd/display: Add BLNDGAM memory shutdown support
[Why]
The BLNDGAM memory blocks should be powered down when they're not in
use. This will reduce power consumption.
[How]
1. Write to BLNDGAM_MEM_PWR_FORCE to put memory to shutdown when BLNDGAM
is not used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: intermittent underflow observed when PIP is toggled in Full screen
[Why]
The MPCC may change and request data when the pipes are switching from 2
to 1 or 1 to 2. During the switch there is a possibility of underflow
and flicker/missing data.
[How]
During VBlank the MPCC won't request data. The trick is to delay and
wait on VBlank, ONLY when pipes are either turning on or off, right
before MPCC is reset for the pipes.
Signed-off-by: Tashfique Abdullah <tabdullah@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jacky Liao [Wed, 21 Oct 2020 21:31:26 +0000 (17:31 -0400)]
drm/amd/display: Add DMCU memory low power support
[Why]
On some platforms, DMCU is no longer used. In these cases, some DMCU
memory should be completely powered off to save power.
[How]
1. Set DMCU_ERAM_MEM_PWR_FORCE to shutdown memory when DMCU is not in
use
2. Added a debug option to allow this behaviour to be turned off
3. Set all memory low power debug options to off first, to not
immediately cause problems
Signed-off-by: Jacky Liao <ziyu.liao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ashley Thomas [Thu, 1 Oct 2020 07:16:05 +0000 (00:16 -0700)]
drm/amd/display: Source minimum HBlank support
[Why]
Some sink devices wish to have access to the minimum HBlank supported by
the ASIC.
[How]
Make the ASIC minimum HBlank available in Source Device information
address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Mon, 21 Sep 2020 18:24:09 +0000 (14:24 -0400)]
drm/amd/display: add i2c speed arbitration for dc_i2c and hdcp_i2c
[why]
HDCP 1.4 failed on SL8800 SW w/a test driver use.
[how]
slower down the HW i2c speed when used by HW i2c.
this request: each acquired_i2c_engine setup the i2c speed needed.
and set the I2c engine for HDCP use at release_engine.
this covers SW using HW I2c engine and HDCP using HW I2c engine. for
dmcu using HW I2c engine, needs add similar logic in dmcufw.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 3 Nov 2020 13:40:57 +0000 (14:40 +0100)]
drm/amdgpu: implement retry fault handling for Navi
Same as gmc9, basically filter the fault, reroute or handle it.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 3 Nov 2020 13:22:50 +0000 (14:22 +0100)]
drm/amdgpu: enabled software IH ring for Navi
Felix pointed out that we need this for Navi as well.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 31 Oct 2020 17:46:59 +0000 (18:46 +0100)]
drm/amdgpu: make sure retry faults are handled in a work item on Vega
Looks like we can't enabled the IH1/IH2 feature for Vega20, make sure
retry faults are handled on a separate ring anyway.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 31 Oct 2020 17:39:54 +0000 (18:39 +0100)]
drm/amdgpu: enabled software IH ring for Vega
Seems like we won't get the hardware IH1/2 rings on Vega20 working.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Sat, 31 Oct 2020 17:38:15 +0000 (18:38 +0100)]
drm/amdgpu: add infrastructure for soft IH ring
Add a soft IH ring implementation similar to the hardware IH1/2.
This can be used if the hardware delegation of interrupts to IH1/2
doesn't work for some reason.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 3 Nov 2020 13:34:49 +0000 (14:34 +0100)]
drm/amdgpu: cleanup gmc_v10_0_process_interrupt a bit
Return early in case of a ratelimit and don't print leading zeros for
the address.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 3 Nov 2020 13:29:42 +0000 (14:29 +0100)]
drm/amdgpu: drop leading zeros from the gmc9 fault address
The address space is only 48bit, not 64bit. And the VMHUBs work with
sign extended addresses.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 20 Nov 2020 16:00:21 +0000 (17:00 +0100)]
drm/radeon: use generic DMA API
Use generic DMA api instead of bus-specific API.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nirmoy Das [Fri, 20 Nov 2020 15:29:40 +0000 (16:29 +0100)]
drm/amdgpu: use generic DMA API
Use generic DMA api instead of bus-specific API.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a break statement instead of letting
the code fall through to the next case, and a fallthrough pseudo-keyword
as a replacement for a /* fall through */ comment,
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple fallthrough pseudo-keyword macros,
as replacement for /* fall through */ comments.
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Tue, 17 Nov 2020 20:25:48 +0000 (15:25 -0500)]
drm/amd/display: Avoid HDCP initialization in devices without output
The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bernard Zhao [Wed, 18 Nov 2020 02:55:01 +0000 (18:55 -0800)]
amd/amdgpu: use kmalloc_array to replace kmalloc with multiply
Fix check_patch.pl warning:
WARNING: Prefer kmalloc_array over kmalloc with multiply
+bps = kmalloc(align_space * sizeof((*data)->bps), GFP_KERNEL);
WARNING: Prefer kmalloc_array over kmalloc with multiply
+bps_bo = kmalloc(align_space * sizeof((*data)->bps_bo),
GFP_KERNEL);
kmalloc_array has multiply overflow check, which will be safer.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bernard Zhao [Wed, 18 Nov 2020 02:42:29 +0000 (18:42 -0800)]
amdgpu/amdgpu_ids: fix kmalloc_array not uses number as first arg
Fix check_patch.pl warning:
kmalloc_array uses number as first arg, sizeof is generally wrong.
+fences = kmalloc_array(sizeof(void *), id_mgr->num_ids,
GFP_KERNEL);
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Mon, 2 Nov 2020 20:38:42 +0000 (15:38 -0500)]
drm/amdgpu/vcn: add test for dec software ring
Add vcn software ring decode ring test and decode ib test.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
James Zhu [Wed, 18 Nov 2020 14:08:03 +0000 (09:08 -0500)]
drm/amdgpu/vcn: refactor dec message functions
refactor dec message functions to add dec software ring support.
Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Default runtime logic not changed.
Provide an alternative runtime method. (set 1 to use BACO; 2 to use BAMACO)
When set reset_method to 4, it will use BACO or BAMACO for gpu reset,
according to runpm value.
Likun Gao [Fri, 20 Nov 2020 07:44:36 +0000 (15:44 +0800)]
drm/amd/pm: fix the crash after runtime pm resume
Some features are still disabled after runtime pm resume. This can take
the hardware back.
Unlike other projects, this doesn't need pptable retransfer.
Sonny Jiang [Fri, 20 Nov 2020 07:38:09 +0000 (02:38 -0500)]
drm/amdgpu: fix a page fault
The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Fri, 20 Nov 2020 06:31:13 +0000 (14:31 +0800)]
drm/amd/amdgpu: skip unload message in reset
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset.
Otherwise it will cause the fw wrong state after reset and no response for any messages.