Grzegorz Siwik [Fri, 12 Aug 2022 13:25:49 +0000 (15:25 +0200)]
ice: Fix clearing of promisc mode with bridge over bond
When at least two interfaces are bonded and a bridge is enabled on the
bond, an error can occur when the bridge is removed and re-added. The
reason for the error is because promiscuous mode was not fully cleared from
the VLAN VSI in the hardware. With this change, promiscuous mode is
properly removed when the bridge disconnects from bonding.
[ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it
[ 1033.676366] bond1: making interface enp175s0f0 the new active one
[ 1033.676369] device enp95s0f0 left promiscuous mode
[ 1033.676522] device enp175s0f0 entered promiscuous mode
[ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6
[ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it
[ 1041.944874] device enp175s0f0 left promiscuous mode
[ 1041.944918] bond1: now running without any active interface!
Fixes: dde6335ad433 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:48 +0000 (15:25 +0200)]
ice: Ignore EEXIST when setting promisc mode
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes: a3fba1d82808 ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Siwik [Fri, 12 Aug 2022 13:25:47 +0000 (15:25 +0200)]
ice: Fix double VLAN error when entering promisc mode
Avoid enabling or disabling VLAN 0 when trying to set promiscuous
VLAN mode if double VLAN mode is enabled. This fix is needed
because the driver tries to add the VLAN 0 filter twice (once for
inner and once for outer) when double VLAN mode is enabled. The
filter program is rejected by the firmware when double VLAN is
enabled, because the promiscuous filter only needs to be set once.
This issue was missed in the initial implementation of double VLAN
mode.
Fixes: a3fba1d82808 ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jakub Kicinski [Tue, 16 Aug 2022 00:23:58 +0000 (17:23 -0700)]
tls: rx: react to strparser initialization errors
Even though the normal strparser's init function has a return
value we got away with ignoring errors until now, as it only
validates the parameters and we were passing correct parameters.
tls_strp can fail to init on memory allocation errors, which
syzbot duly induced and reported.
Reported-by: syzbot+abd45eb849b05194b1b6@syzkaller.appspotmail.com Fixes: ae04dc969181 ("tls: rx: do not use the standard strparser") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Brady [Tue, 2 Aug 2022 08:19:17 +0000 (10:19 +0200)]
i40e: Fix to stop tx_timeout recovery if GLOBR fails
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 398a4d9906b4 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Fix tunnel checksum offload with fragmented traffic
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \
enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Without this patch, TX descriptor was using wrong data, due to
l4 header pointing wrong address. NIC would then drop those packets
internally, due to incorrect TX descriptor data, which increased
GLV_TEPC register.
Fixes: 43df3733c504 ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jakub Kicinski [Tue, 16 Aug 2022 03:14:39 +0000 (20:14 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-12 (iavf)
This series contains updates to iavf driver only.
Przemyslaw frees memory for admin queues in initialization error paths,
prevents freeing of vf_res which is causing null pointer dereference,
and adjusts calls in error path of reset to avoid iavf_close() which
could cause deadlock.
Ivan Vecera avoids deadlock that can occur when driver if part of
failover.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix deadlock in initialization
iavf: Fix reset error handling
iavf: Fix NULL pointer dereference in iavf_get_link_ksettings
iavf: Fix adminq error handling
====================
Zhengchao Shao [Mon, 15 Aug 2022 02:46:29 +0000 (10:46 +0800)]
net: rtnetlink: fix module reference count leak issue in rtnetlink_rcv_msg
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: fd961262a741 ("net: rtnetlink: add bulk delete support flag") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Mon, 15 Aug 2022 10:49:58 +0000 (11:49 +0100)]
Merge branch 'mlxsw-fixes'
Petr Machata says:
====================
mlxsw: Fixes for PTP support
This set fixes several issues in mlxsw PTP code.
- Patch #1 fixes compilation warnings.
- Patch #2 adjusts the order of operation during cleanup, thereby
closing the window after PTP state was already cleaned in the ASIC
for the given port, but before the port is removed, when the user
could still in theory make changes to the configuration.
- Patch #3 protects the PTP configuration with a custom mutex, instead
of relying on RTNL, which is not held in all access paths.
- Patch #4 forbids enablement of PTP only in RX or only in TX. The
driver implicitly assumed this would be the case, but neglected to
sanitize the configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:03 +0000 (17:32 +0200)]
mlxsw: spectrum_ptp: Forbid PTP enablement only in RX or in TX
Currently mlxsw driver configures one global PTP configuration for all
ports. The reason is that the switch behaves like a transparent clock
between CPU port and front-panel ports. When time stamp is enabled in
any port, the hardware is configured to update the correction field. The
fact that the configuration of CPU port affects all the ports, makes the
correction field update to be global for all ports. Otherwise, user will
see odd values in the correction field, as the switch will update the
correction field in the CPU port, but not in all the front-panel ports.
The CPU port is relevant in both RX and TX, so to avoid problematic
configuration, forbid PTP enablement only in one direction, i.e., only in
RX or TX.
Without the change:
$ hwstamp_ctl -i swp1 -r 12 -t 0
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 0
rx_filter 2
$ echo $?
0
With the change:
$ hwstamp_ctl -i swp1 -r 12 -t 0
current settings:
tx_type 1
rx_filter 2
SIOCSHWTSTAMP failed: Invalid argument
Fixes: 8a69093e3fce0 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:02 +0000 (17:32 +0200)]
mlxsw: spectrum_ptp: Protect PTP configuration with a mutex
Currently the functions mlxsw_sp2_ptp_{configure, deconfigure}_port()
assume that they are called when RTNL is locked and they warn otherwise.
The deconfigure function can be called when port is removed, for example
as part of device reload, then there is no locked RTNL and the function
warns [1].
To avoid such case, do not assume that RTNL protects this code, add a
dedicated mutex instead. The mutex protects 'ptp_state->config' which
stores the existing global configuration in hardware. Use this mutex also
to protect the code which configures the hardware. Then, there will be
only one configuration in any time, which will be updated in 'ptp_state'
and a race will be avoided.
Fixes: 8a69093e3fce0 ("mlxsw: spectrum_ptp: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:01 +0000 (17:32 +0200)]
mlxsw: spectrum: Clear PTP configuration after unregistering the netdevice
Currently as part of removing port, PTP API is called to clear the
existing configuration and set the 'rx_filter' and 'tx_type' to zero.
The clearing is done before unregistering the netdevice, which means that
there is a window of time in which the user can reconfigure PTP in the
port, and this configuration will not be cleared.
Reorder the operations, clear PTP configuration after unregistering the
netdevice.
Fixes: b711e885ca602 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Fri, 12 Aug 2022 15:32:00 +0000 (17:32 +0200)]
mlxsw: spectrum_ptp: Fix compilation warnings
In case that 'CONFIG_PTP_1588_CLOCK' is not enabled in the config file,
there are implementations for the functions
mlxsw_{sp,sp2}_ptp_txhdr_construct() as part of 'spectrum_ptp.h'. In this
case, they should be defined as 'static' as they are not supposed to be
used out of this file. Make the functions 'static', otherwise the following
warnings are returned:
"warning: no previous prototype for 'mlxsw_sp_ptp_txhdr_construct'"
"warning: no previous prototype for 'mlxsw_sp2_ptp_txhdr_construct'"
In addition, make the functions 'inline' for case that 'spectrum_ptp.h'
will be included anywhere else and the functions would probably not be
used, so compilation warnings about unused static will be returned.
Fixes: fa33d34eef6f ("mlxsw: Send PTP packets as data packets to overcome a limitation") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim [Sun, 14 Aug 2022 11:27:58 +0000 (11:27 +0000)]
net_sched: cls_route: disallow handle of 0
Follows up on:
https://lore.kernel.org/all/20220809170518.164662-1-cascardo@canonical.com/
handle of 0 implies from/to of universe realm which is not very
sensible.
Lets see what this patch will do:
$sudo tc qdisc add dev $DEV root handle 1:0 prio
//lets manufacture a way to insert handle of 0
$sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 \
route to 0 from 0 classid 1:10 action ok
//gets rejected...
Error: handle of 0 is not valid.
We have an error talking to the kernel, -1
//lets create a legit entry..
sudo tc filter add dev $DEV parent 1:0 protocol ip prio 100 route from 10 \
classid 1:10 action ok
//what did the kernel insert?
$sudo tc filter ls dev $DEV parent 1:0
filter protocol ip pref 100 route chain 0
filter protocol ip pref 100 route chain 0 fh 0x000a8000 flowid 1:10 from 10
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
//Lets try to replace that legit entry with a handle of 0
$ sudo tc filter replace dev $DEV parent 1:0 protocol ip prio 100 \
handle 0x000a8000 route to 0 from 0 classid 1:10 action drop
Error: Replacing with handle of 0 is invalid.
We have an error talking to the kernel, -1
And last, lets run Cascardo's POC:
$ ./poc
0
0
-22
-22
-22
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Xiong [Sat, 13 Aug 2022 12:49:08 +0000 (20:49 +0800)]
net: fix potential refcount leak in ndisc_router_discovery()
The issue happens on specific paths in the function. After both the
object `rt` and `neigh` are grabbed successfully, when `lifetime` is
nonzero but the metric needs change, the function just deletes the
route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh`
again if above conditions hold. The function simply overwrite `neigh`
if succeeds or returns if fails, without decreasing the reference
count of previous `neigh`. This may result in memory leaks.
Fix it by decrementing the reference count of `neigh` in place.
Fixes: e39f0cd8a6a2 ("net: allow user to set metric on default route learned via Router Advertisement") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Right now we have a neigh_param PROXY_QLEN which specifies maximum length
of neigh_table->proxy_queue. But in fact, this limitation doesn't work well
because check condition looks like:
tbl->proxy_queue.qlen > NEIGH_VAR(p, PROXY_QLEN)
The problem is that p (struct neigh_parms) is a per-device thing,
but tbl (struct neigh_table) is a system-wide global thing.
It seems reasonable to make proxy_queue limit per-device based.
v2:
- nothing changed in this patch
v3:
- rebase to net tree
Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@kernel.org> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Christian Brauner <brauner@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: kernel@openvz.org Cc: devel@openvz.org Suggested-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Denis V. Lunev [Thu, 11 Aug 2022 15:20:11 +0000 (18:20 +0300)]
neigh: fix possible DoS due to net iface start/stop loop
Normal processing of ARP request (usually this is Ethernet broadcast
packet) coming to the host is looking like the following:
* the packet comes to arp_process() call and is passed through routing
procedure
* the request is put into the queue using pneigh_enqueue() if
corresponding ARP record is not local (common case for container
records on the host)
* the request is processed by timer (within 80 jiffies by default) and
ARP reply is sent from the same arp_process() using
NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED condition (flag is set inside
pneigh_enqueue())
And here the problem comes. Linux kernel calls pneigh_queue_purge()
which destroys the whole queue of ARP requests on ANY network interface
start/stop event through __neigh_ifdown().
This is actually not a problem within the original world as network
interface start/stop was accessible to the host 'root' only, which
could do more destructive things. But the world is changed and there
are Linux containers available. Here container 'root' has an access
to this API and could be considered as untrusted user in the hosting
(container's) world.
Thus there is an attack vector to other containers on node when
container's root will endlessly start/stop interfaces. We have observed
similar situation on a real production node when docker container was
doing such activity and thus other containers on the node become not
accessible.
The patch proposed doing very simple thing. It drops only packets from
the same namespace in the pneigh_queue_purge() where network interface
state change is detected. This is enough to prevent the problem for the
whole node preserving original semantics of the code.
v2:
- do del_timer_sync() if queue is empty after pneigh_queue_purge()
v3:
- rebase to net tree
Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@kernel.org> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Christian Brauner <brauner@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: kernel@openvz.org Cc: devel@openvz.org Investigated-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim Kochetkov [Thu, 11 Aug 2022 09:48:40 +0000 (12:48 +0300)]
net: qrtr: start MHI channel after endpoit creation
MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.
1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:
if (!qdev || mhi_res->transaction_status)
return;
Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------
2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():
Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it.
Fixes: ce8f51e3e876 ("net: qrtr: Start MHI channels during init") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Antonov [Thu, 11 Aug 2022 07:09:39 +0000 (10:09 +0300)]
net: dsa: mv88e6060: prevent crash on an unused port
If the port isn't a CPU port nor a user port, 'cpu_dp'
is a null pointer and a crash happened on dereferencing
it in mv88e6060_setup_port():
[ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014
...
[ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84
[ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54
[ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0
[ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c
[ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c
[ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0
[ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184
[ 9.986632] __device_attach from bus_probe_device+0x8c/0x94
[ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8
[ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c
[ 10.006292] process_one_work from worker_thread+0x30/0x4b8
[ 10.012155] worker_thread from kthread+0xd4/0x10c
[ 10.017238] kthread from ret_from_fork+0x14/0x3c
Fixes: f54af379eeb3 ("net: dsa: use dedicated CPU port") CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Mon, 8 Aug 2022 17:58:45 +0000 (19:58 +0200)]
iavf: Fix deadlock in initialization
Fix deadlock that occurs when iavf interface is a part of failover
configuration.
1. Mutex crit_lock is taken at the beginning of iavf_watchdog_task()
2. Function iavf_init_config_adapter() is called when adapter
state is __IAVF_INIT_CONFIG_ADAPTER
3. iavf_init_config_adapter() calls register_netdevice() that emits
NETDEV_REGISTER event
4. Notifier function failover_event() then calls
net_failover_slave_register() that calls dev_open()
5. dev_open() calls iavf_open() that tries to take crit_lock in
end-less loop
To fix the situation we should check the current adapter state after
first unsuccessful mutex_trylock() and return with -EBUSY if it is
__IAVF_INIT_CONFIG_ADAPTER.
Fixes: 52f52e7468d5 ("iavf: fix locking of critical sections") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent
memory for VF mailbox.
Free DMA regions for both ASQ and ARQ in case error happens during
configuration of ASQ/ARQ registers.
Without this change it is possible to see when unloading interface:
74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32]
One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
Fixes: 003409b7882c ("i40evf: init code and hardware support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Using native endian-ness for device supplied fields is wrong
on BE platforms. Sparse warns about this.
Fixes: 7deccc28be9e ("drivers/net/virtio_net: Added RSS hash report.") Cc: "Andrew Melnychenko" <andrew@daynix.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Xiong [Wed, 10 Aug 2022 15:29:13 +0000 (23:29 +0800)]
net/sunrpc: fix potential memory leaks in rpc_sysfs_xprt_state_change()
The issue happens on some error handling paths. When the function
fails to grab the object `xprt`, it simply returns 0, forgetting to
decrease the reference count of another object `xps`, which is
increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount
leaks. Also, the function forgets to check whether `xps` is valid
before using it, which may result in NULL-dereferencing issues.
Fix it by adding proper error handling code when either `xprt` or
`xps` is NULL.
Fixes: 58975f64c0ef ("SUNRPC: take a xprt offline using sysfs") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mikulas Patocka [Wed, 10 Aug 2022 13:00:42 +0000 (09:00 -0400)]
rds: add missing barrier to release_refill
The functions clear_bit and set_bit do not imply a memory barrier, thus it
may be possible that the waitqueue_active function (which does not take
any locks) is moved before clear_bit and it could miss a wakeup event.
Fix this bug by adding a memory barrier after clear_bit.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 11 Aug 2022 20:45:37 +0000 (13:45 -0700)]
Merge tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf, can and netfilter.
A little larger than usual but it's all fixes, no late features. It's
large partially because of timing, and partially because of follow ups
to stuff that got merged a week or so before the merge window and
wasn't as widely tested. Maybe the Bluetooth fixes are a little
alarming so we'll address that, but the rest seems okay and not scary.
Notably we're including a fix for the netfilter Kconfig [1], your WiFi
warning [2] and a bluetooth fix which should unblock syzbot [3].
Current release - regressions:
- Bluetooth:
- don't try to cancel uninitialized works [3]
- L2CAP: fix use-after-free caused by l2cap_chan_put
- tls: rx: fix device offload after recent rework
- devlink: fix UAF on failed reload and leftover locks in mlxsw
Current release - new code bugs:
- netfilter:
- flowtable: fix incorrect Kconfig dependencies [1]
- nf_tables: fix crash when nf_trace is enabled
- bpf:
- use proper target btf when exporting attach_btf_obj_id
- arm64: fixes for bpf trampoline support
- Bluetooth:
- ISO: unlock on error path in iso_sock_setsockopt()
- ISO: fix info leak in iso_sock_getsockopt()
- ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
- ISO: fix memory corruption on iso_pinfo.base
- ISO: fix not using the correct QoS
- hci_conn: fix updating ISO QoS PHY
- phy: dp83867: fix get nvmem cell fail
Previous releases - regressions:
- wifi: cfg80211: fix validating BSS pointers in
__cfg80211_connect_result [2]
- atm: bring back zatm uAPI after ATM had been removed
- properly fix old bug making bonding ARP monitor mode not being able
to work with software devices with lockless Tx
- tap: fix null-deref on skb->dev in dev_parse_header_protocol
- revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
devices and breaks others
- netfilter:
- nf_tables: many fixes rejecting cross-object linking which may
lead to UAFs
- nf_tables: fix null deref due to zeroed list head
- nf_tables: validate variable length element extension
- bgmac: fix a BUG triggered by wrong bytes_compl
- bcmgenet: indicate MAC is in charge of PHY PM
Previous releases - always broken:
- bpf:
- fix bad pointer deref in bpf_sys_bpf() injected via test infra
- disallow non-builtin bpf programs calling the prog_run command
- don't reinit map value in prealloc_lru_pop
- fix UAFs during the read of map iterator fd
- fix invalidity check for values in sk local storage map
- reject sleepable program for non-resched map iterator
- mptcp:
- move subflow cleanup in mptcp_destroy_common()
- do not queue data on closed subflows
- virtio_net: fix memory leak inside XDP_TX with mergeable
- vsock: fix memory leak when multiple threads try to connect()
- rework sk_user_data sharing to prevent psock leaks
- geneve: fix TOS inheriting for ipv4
- tunnels & drivers: do not use RT_TOS for IPv6 flowlabel
- phy: c45 baset1: do not skip aneg configuration if clock role is
not specified
- rose: avoid overflow when /proc displays timer information
- x25: fix call timeouts in blocking connects
- can: mcp251x: fix race condition on receive interrupt
- can: j1939:
- replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
- fix memory leak of skbs in j1939_session_destroy()
Misc:
- docs: bpf: clarify that many things are not uAPI
- seg6: initialize induction variable to first valid array index (to
silence clang vs objtool warning)
* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
net: atm: bring back zatm uAPI
dpaa2-eth: trace the allocated address instead of page struct
net: add missing kdoc for struct genl_multicast_group::flags
nfp: fix use-after-free in area_cache_get()
MAINTAINERS: use my korg address for mt7601u
mlxsw: minimal: Fix deadlock in ports creation
bonding: fix reference count leak in balance-alb mode
net: usb: qmi_wwan: Add support for Cinterion MV32
bpf: Shut up kern_sys_bpf warning.
net/tls: Use RCU API to access tls_ctx->netdev
tls: rx: device: don't try to copy too much on detach
tls: rx: device: bound the frag walk
net_sched: cls_route: remove from list when handle is 0
selftests: forwarding: Fix failing tests with old libnet
net: refactor bpf_sk_reuseport_detach()
net: fix refcount bug in sk_psock_get (2)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
...
Linus Torvalds [Thu, 11 Aug 2022 20:26:09 +0000 (13:26 -0700)]
Merge tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix up direct references to the fwnode field in struct device
and extend ACPI device properties support.
Specifics:
- Replace direct references to the fwnode field in struct device with
dev_fwnode() and device_match_fwnode() (Andy Shevchenko)
- Make the ACPI code handling device properties support properties
with buffer values (Sakari Ailus)"
* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: VIOT: Do not dereference fwnode in struct device
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
Linus Torvalds [Thu, 11 Aug 2022 20:11:49 +0000 (13:11 -0700)]
Merge tag 'iomap-6.0-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more iomap updates from Darrick Wong:
"In the past 10 days or so I've not heard any ZOMG STOP style
complaints about removing ->writepage support from gfs2 or zonefs, so
here's the pull request removing them (and the underlying fs iomap
support) from the kernel:
- Remove iomap_writepage and all callers, since the mm apparently
never called the zonefs or gfs2 writepage functions"
* tag 'iomap-6.0-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: remove iomap_writepage
zonefs: remove ->writepage
gfs2: remove ->writepage
gfs2: stop using generic_writepages in gfs2_ail1_start_one
Linus Torvalds [Thu, 11 Aug 2022 19:41:07 +0000 (12:41 -0700)]
Merge tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a good pile of various fixes and cleanups from Xiubo, Jeff,
Luis and others, almost exclusively in the filesystem.
Several patches touch files outside of our normal purview to set the
stage for bringing in Jeff's long awaited ceph+fscrypt series in the
near future. All of them have appropriate acks and sat in linux-next
for a while"
* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
libceph: clean up ceph_osdc_start_request prototype
libceph: fix ceph_pagelist_reserve() comment typo
ceph: remove useless check for the folio
ceph: don't truncate file in atomic_open
ceph: make f_bsize always equal to f_frsize
ceph: flush the dirty caps immediatelly when quota is approaching
libceph: print fsid and epoch with osd id
libceph: check pointer before assigned to "c->rules[]"
ceph: don't get the inline data for new creating files
ceph: update the auth cap when the async create req is forwarded
ceph: make change_auth_cap_ses a global symbol
ceph: fix incorrect old_size length in ceph_mds_request_args
ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
ceph: call netfs_subreq_terminated with was_async == false
ceph: convert to generic_file_llseek
ceph: fix the incorrect comment for the ceph_mds_caps struct
ceph: don't leak snap_rwsem in handle_cap_grant
ceph: prevent a client from exceeding the MDS maximum xattr size
ceph: choose auth MDS for getxattr with the Xs caps
ceph: add session already open notify support
...
Linus Torvalds [Thu, 11 Aug 2022 19:10:08 +0000 (12:10 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- Xen timer fixes
- Documentation formatting fixes
- Make rseq selftest compatible with glibc-2.35
- Fix handling of illegal LEA reg, reg
- Cleanup creation of debugfs entries
- Fix steal time cache handling bug
- Fixes for MMIO caching
- Optimize computation of number of LBRs
- Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: x86/MMU: properly format KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability table
Documentation: KVM: extend KVM_CAP_VM_DISABLE_NX_HUGE_PAGES heading underline
KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
KVM: selftests: Make rseq compatible with glibc-2.35
KVM: Actually create debugfs in kvm_create_vm()
KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
KVM: Get an fd before creating the VM
KVM: Shove vcpu stats_id init into kvm_vcpu_init()
KVM: Shove vm stats_id init into kvm_create_vm()
KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
KVM: x86/mmu: rename trace function name for asynchronous page fault
KVM: x86/xen: Stop Xen timer before changing IRQ
KVM: x86/xen: Initialize Xen timer only once
KVM: SVM: Disable SEV-ES support if MMIO caching is disable
KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
KVM: x86: Tag kvm_mmu_x86_module_init() with __init
...
Jakub Kicinski [Wed, 10 Aug 2022 16:45:47 +0000 (09:45 -0700)]
net: atm: bring back zatm uAPI
Jiri reports that linux-atm does not build without this header.
Bring it back. It's completely dead code but we can't break
the build for user space :(
Chen Lin [Thu, 11 Aug 2022 15:16:51 +0000 (23:16 +0800)]
dpaa2-eth: trace the allocated address instead of page struct
We should trace the allocated address instead of page struct.
Fixes: e106a04f1ffa ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.
* acpi-properties:
ACPI: property: Fix error handling in acpi_init_properties()
ACPI: property: Read buffer properties as integers
ACPI: property: Add support for parsing buffer property UUID
ACPI: property: Unify integer value reading functions
ACPI: property: Switch node property referencing from ifs to a switch
ACPI: property: Move property ref argument parsing into a new function
ACPI: property: Use acpi_object_type consistently in property ref parsing
ACPI: property: Tie data nodes to acpi handles
ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
Linus Torvalds [Thu, 11 Aug 2022 16:23:08 +0000 (09:23 -0700)]
Merge tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- changes to input core to properly queue synthetic events (such as
autorepeat) and to release multitouch contacts when an input device
is inhibited or suspended
- reworked quirk handling in i8042 driver that consolidates multiple
DMI tables into one and adds several quirks for TUXEDO line of
laptops
- update to mt6779 keypad to better reflect organization of the
hardware
- changes to mtk-pmic-keys driver preparing it to handle more variants
- facelift of adp5588-keys driver
- improvements to iqs7222 driver
- adjustments to various DT binding documents for input devices
- other assorted driver fixes.
* tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: adc-joystick - fix ordering in adc_joystick_probe()
dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml
Input: deactivate MT slots when inhibiting or suspending devices
Input: properly queue synthetic events
dt-bindings: input: iqs7222: Use central 'linux,code' definition
Input: i8042 - add dritek quirk for Acer Aspire One AO532
dt-bindings: input: gpio-keys: accept also interrupt-extended
dt-bindings: input: gpio-keys: reference input.yaml and document properties
dt-bindings: input: gpio-keys: enforce node names to match all properties
dt-bindings: input: Convert adc-keys to DT schema
dt-bindings: input: Centralize 'linux,input-type' definition
dt-bindings: input: Use common 'linux,keycodes' definition
dt-bindings: input: Centralize 'linux,code' definition
dt-bindings: input: Increase maximum keycode value to 0x2ff
Input: mt6779-keypad - implement row/column selection
Input: mt6779-keypad - match hardware matrix organization
Input: i8042 - add additional TUXEDO devices to i8042 quirk tables
Input: goodix - switch use of acpi_gpio_get_*_resource() APIs
Input: i8042 - add TUXEDO devices to i8042 quirk tables
Input: i8042 - add debug output for quirks
...
Jialiang Wang [Wed, 10 Aug 2022 07:30:57 +0000 (15:30 +0800)]
nfp: fix use-after-free in area_cache_get()
area_cache_get() is used to distribute cache->area and set cache->id,
and if cache->id is not 0 and cache->area->kref refcount is 0, it will
release the cache->area by nfp_cpp_area_release(). area_cache_get()
set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().
But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
is already set but the refcount is not increased as expected. At this
time, calling the nfp_cpp_area_release() will cause use-after-free.
To avoid the use-after-free, set cache->id after area_init() and
nfp_cpp_area_acquire() complete successfully.
Note: This vulnerability is triggerable by providing emulated device
equipped with specified configuration.
BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1
Michal Jaron [Mon, 25 Jul 2022 08:32:43 +0000 (10:32 +0200)]
ice: Fix call trace with null VSI during VF reset
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
call trace in ice_reset_vf that VF's VSI is null.
Remove WARN_ON() from check if VSI is null in ice_reset_vf.
Add "VF is already removed\n" in dev_dbg().
This WARN_ON() is unnecessary and causes call trace, despite that
call trace, driver still works. There is no need for this warn
because this piece of code is responsible for disabling VF's Tx/Rx
queues when VF is disabled, but when VF is already removed there
is no need to do reset or disable queues.
Fixes: 2f47d18bd0cc ("ice: Fix memory corruption in VF driver") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jay Vosburgh [Thu, 11 Aug 2022 05:06:53 +0000 (22:06 -0700)]
bonding: fix reference count leak in balance-alb mode
Commit c5e8ed492e36 ("net:bonding:support balance-alb interface
with vlan to bridge") introduced a reference count leak by not releasing
the reference acquired by ip_dev_find(). Remedy this by insuring the
reference is released.
Fixes: c5e8ed492e36 ("net:bonding:support balance-alb interface with vlan to bridge") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/26758.1660194413@famine Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clang -Wformat warning is terminally broken, and the clang people
can't seem to get their act together.
This test program causes a warning with clang:
#include <stdio.h>
int main(int argc, char **argv)
{
printf("%hhu\n", 'a');
}
resulting in
t.c:5:19: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat]
printf("%hhu\n", 'a');
~~~~ ^~~
%d
and apparently clang people consider that a feature, because they don't
want to face the reality of how either C character constants, C
arithmetic, and C varargs functions work.
The rest of the world just shakes their head at that kind of
incompetence, and turns off -Wformat for clang again.
And no, the "you should use a pointless cast to shut this up" is not a
valid answer. That warning should not exist in the first place, or at
least be optinal with some "-Wformat-me-harder" kind of option.
[ Admittedly, there's also very little reason to *ever* use '%hh[ud]' in
C, but what little reason there is is entirely about 'I want to see
only the low 8 bits of the argument'. So I would suggest nobody ever
use that format in the first place, but if they do, the clang
behavious is simply always wrong. Because '%hhu' takes an 'int'. It's
that simple. ]
In commit 332317173833 ("ice: store VF pointer instead of VF ID")
WARN_ON checks were added to validate the vsi->vf pointer and
catch programming errors. However, one check to vsi->vf was missed.
This caused a call trace when resetting VFs.
Fix ice_vsi_rebuild by encompassing VF pointer in WARN_ON check.
Fixes: 332317173833 ("ice: store VF pointer instead of VF ID") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Slark Xiao [Wed, 10 Aug 2022 01:45:21 +0000 (09:45 +0800)]
net: usb: qmi_wwan: Add support for Cinterion MV32
There are 2 models for MV32 serials. MV32-W-A is designed
based on Qualcomm SDX62 chip, and MV32-W-B is designed based
on Qualcomm SDX65 chip. So we use 2 different PID to separate it.
Shut up this warning:
kernel/bpf/syscall.c:5089:5: warning: no previous prototype for function 'kern_sys_bpf' [-Wmissing-prototypes]
int kern_sys_bpf(int cmd, union bpf_attr *attr, unsigned int size)
Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, tls_device_down synchronizes with tls_device_resync_rx using
RCU, however, the pointer to netdev is stored using WRITE_ONCE and
loaded using READ_ONCE.
Although such approach is technically correct (rcu_dereference is
essentially a READ_ONCE, and rcu_assign_pointer uses WRITE_ONCE to store
NULL), using special RCU helpers for pointers is more valid, as it
includes additional checks and might change the implementation
transparently to the callers.
Mark the netdev pointer as __rcu and use the correct RCU helpers to
access it. For non-concurrent access pass the right conditions that
guarantee safe access (locks taken, refcount value). Also use the
correct helper in mlx5e, where even READ_ONCE was missing.
The transition to RCU exposes existing issues, fixed by this commit:
1. bond_tls_device_xmit could read netdev twice, and it could become
NULL the second time, after the NULL check passed.
2. Drivers shouldn't stop processing the last packet if tls_device_down
just set netdev to NULL, before tls_dev_del was called. This prevents a
possible packet drop when transitioning to the fallback software mode.
Fixes: f2ba03f7abcb ("net/bonding: Implement TLS TX device offload") Fixes: 77886d834bc2 ("net/tls: Fix use-after-free after the TLS device goes down and up") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Link: https://lore.kernel.org/r/20220810081602.1435800-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 9 Aug 2022 17:55:44 +0000 (10:55 -0700)]
tls: rx: device: don't try to copy too much on detach
Another device offload bug, we use the length of the output
skb as an indication of how much data to copy. But that skb
is sized to offset + record length, and we start from offset.
So we end up double-counting the offset which leads to
skb_copy_bits() returning -EFAULT.
Reported-by: Tariq Toukan <tariqt@nvidia.com> Fixes: ae04dc969181 ("tls: rx: do not use the standard strparser") Tested-by: Ran Rozenstein <ranro@nvidia.com> Link: https://lore.kernel.org/r/20220809175544.354343-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 9 Aug 2022 17:55:43 +0000 (10:55 -0700)]
tls: rx: device: bound the frag walk
We can't do skb_walk_frags() on the input skbs, because
the input skbs is really just a pointer to the tcp read
queue. We need to bound the "is decrypted" check by the
amount of data in the message.
Note that the walk in tls_device_reencrypt() is after a
CoW so the skb there is safe to walk. Actually in the
current implementation it can't have frags at all, but
whatever, maybe one day it will.
Reported-by: Tariq Toukan <tariqt@nvidia.com> Fixes: ae04dc969181 ("tls: rx: do not use the standard strparser") Tested-by: Ran Rozenstein <ranro@nvidia.com> Link: https://lore.kernel.org/r/20220809175544.354343-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_sched: cls_route: remove from list when handle is 0
When a route filter is replaced and the old filter has a 0 handle, the old
one won't be removed from the hashtable, while it will still be freed.
The test was there since before commit 56e0e5d62434 ("net: sched: RCU
cls_route"), when a new filter was not allocated when there was an old one.
The old filter was reused and the reinserting would only be necessary if an
old filter was replaced. That was still wrong for the same case where the
old handle was 0.
Remove the old filter from the list independently from its handle value.
This fixes CVE-2022-2588, also reported as ZDI-CAN-17440.
Reported-by: Zhenpeng Lin <zplin@u.northwestern.edu> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: Kamal Mostafa <kamal@canonical.com> Cc: <stable@vger.kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220809170518.164662-1-cascardo@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Tue, 9 Aug 2022 11:33:20 +0000 (14:33 +0300)]
selftests: forwarding: Fix failing tests with old libnet
The custom multipath hash tests use mausezahn in order to test how
changes in various packet fields affect the packet distribution across
the available nexthops.
The tool uses the libnet library for various low-level packet
construction and injection. The library started using the
"SO_BINDTODEVICE" socket option for IPv6 sockets in version 1.1.6 and
for IPv4 sockets in version 1.2.
When the option is not set, packets are not routed according to the
table associated with the VRF master device and tests fail.
Fix this by prefixing the command with "ip vrf exec", which will cause
the route lookup to occur in the VRF routing table. This makes the tests
pass regardless of the libnet library version.
Fixes: bdd958bd469e ("selftests: forwarding: Add test for custom multipath hash") Fixes: 3181cd117985 ("selftests: forwarding: Add test for custom multipath hash with IPv4 GRE") Fixes: 31b015a8befa ("selftests: forwarding: Add test for custom multipath hash with IPv6 GRE") Reported-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Link: https://lore.kernel.org/r/20220809113320.751413-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've added 23 non-merge commits during the last 7 day(s) which contain
a total of 19 files changed, 424 insertions(+), 35 deletions(-).
The main changes are:
1) Several fixes for BPF map iterator such as UAFs along with selftests, from Hou Tao.
2) Fix BPF syscall program's {copy,strncpy}_from_bpfptr() to not fault, from Jinghao Jia.
3) Reject BPF syscall programs calling BPF_PROG_RUN, from Alexei Starovoitov and YiFei Zhu.
4) Fix attach_btf_obj_id info to pick proper target BTF, from Stanislav Fomichev.
5) BPF design Q/A doc update to clarify what is not stable ABI, from Paul E. McKenney.
6) Fix BPF map's prealloc_lru_pop to not reinitialize, from Kumar Kartikeya Dwivedi.
7) Fix bpf_trampoline_put to avoid leaking ftrace hash, from Jiri Olsa.
8) Fix arm64 JIT to address sparse errors around BPF trampoline, from Xu Kuohai.
9) Fix arm64 JIT to use kvcalloc instead of kcalloc for internal program address
offset buffer, from Aijun Sun.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
selftests/bpf: Ensure sleepable program is rejected by hash map iter
selftests/bpf: Add write tests for sk local storage map iterator
selftests/bpf: Add tests for reading a dangling map iter fd
bpf: Only allow sleepable program for resched-able iterator
bpf: Check the validity of max_rdwr_access for sock local storage map iterator
bpf: Acquire map uref in .init_seq_private for sock{map,hash} iterator
bpf: Acquire map uref in .init_seq_private for sock local storage map iterator
bpf: Acquire map uref in .init_seq_private for hash map iterator
bpf: Acquire map uref in .init_seq_private for array map iterator
bpf: Disallow bpf programs call prog_run command.
bpf, arm64: Fix bpf trampoline instruction endianness
selftests/bpf: Add test for prealloc_lru_pop bug
bpf: Don't reinit map value in prealloc_lru_pop
bpf: Allow calling bpf_prog_test kfuncs in tracing programs
bpf, arm64: Allocate program buffer using kvcalloc instead of kcalloc
selftests/bpf: Excercise bpf_obj_get_info_by_fd for bpf2bpf
bpf: Use proper target btf when exporting attach_btf_obj_id
mptcp, btf: Add struct mptcp_sock definition when CONFIG_MPTCP is disabled
bpf: Cleanup ftrace hash in bpf_trampoline_put
BPF: Fix potential bad pointer dereference in bpf_sys_bpf()
...
====================
During SMC fallback process in connect syscall, kernel will
replaces TCP with SMC. In order to forward wakeup
smc socket waitqueue after fallback, kernel will sets
clcsk->sk_user_data to origin smc socket in
smc_fback_replace_callbacks().
Later, in shutdown syscall, kernel will calls
sk_psock_get(), which treats the clcsk->sk_user_data
as psock type, triggering the refcnt warning.
So, the root cause is that smc and psock, both will use
sk_user_data field. So they will mismatch this field
easily.
This patch solves it by using another bit(defined as
SK_USER_DATA_PSOCK) in PTRMASK, to mark whether
sk_user_data points to a psock object or not.
This patch depends on a PTRMASK introduced in commit e9a142008011
("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
For there will possibly be more flags in the sk_user_data field,
this patch also refactor sk_user_data flags code to be more generic
to improve its maintainability.
Reported-and-tested-by: syzbot+5f26f85569bd179c18ce@syzkaller.appspotmail.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nick Desaulniers [Wed, 10 Aug 2022 22:24:41 +0000 (15:24 -0700)]
x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments
Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:
ld: warning: arch/x86/boot/pmjump.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: arch/x86/boot/compressed/vmlinux has a LOAD segment with RWX permissions
Generally, we would like to avoid the stack being executable. Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack. Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.
LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO. --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.
While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.
Nick Desaulniers [Wed, 10 Aug 2022 22:24:40 +0000 (15:24 -0700)]
Makefile: link with -z noexecstack --no-warn-rwx-segments
Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:
ld: warning: vmlinux: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: vmlinux has a LOAD segment with RWX permissions
Generally, we would like to avoid the stack being executable. Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack. Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.
LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO. --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.
While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.
It turns out that gcc-12.1 has some nasty problems with register
allocation on a 32-bit x86 build for the 64-bit values used in the
generic blake2b implementation, where the pattern of 64-bit rotates and
xor operations ends up making gcc generate horrible code.
As a result it ends up with a ridiculously large stack frame for all the
spills it generates, resulting in the following build problem:
crypto/blake2b_generic.c: In function ‘blake2b_compress_one_generic’:
crypto/blake2b_generic.c:109:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
on the same test-case, clang ends up generating a stack frame that is
just 296 bytes (and older gcc versions generate a slightly bigger one at
428 bytes - still nowhere near that almost 3kB monster stack frame of
gcc-12.1).
The issue is fixed both in mainline and the GCC 12 release branch [1],
but current release compilers end up failing the i386 allmodconfig build
due to this issue.
Disable the warning for now by simply raising the frame size for this
one file, just to keep this issue from having people turn off WERROR.
Linus Torvalds [Wed, 10 Aug 2022 21:04:32 +0000 (14:04 -0700)]
Merge tag 'nfs-for-5.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- pNFS/flexfiles: Fix infinite looping when the RDMA connection
errors out
Bugfixes:
- NFS: fix port value parsing
- SUNRPC: Reinitialise the backchannel request buffers before reuse
- SUNRPC: fix expiry of auth creds
- NFSv4: Fix races in the legacy idmapper upcall
- NFS: O_DIRECT fixes from Jeff Layton
- NFSv4.1: Fix OP_SEQUENCE error handling
- SUNRPC: Fix an RPC/RDMA performance regression
- NFS: Fix case insensitive renames
- NFSv4/pnfs: Fix a use-after-free bug in open
- NFSv4.1: RECLAIM_COMPLETE must handle EACCES
Features:
- NFSv4.1: session trunking enhancements
- NFSv4.2: READ_PLUS performance optimisations
- NFS: relax the rules for rsize/wsize mount options
- NFS: don't unhash dentry during unlink/rename
- SUNRPC: Fail faster on bad verifier
- NFS/SUNRPC: Various tracing improvements"
* tag 'nfs-for-5.20-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (46 commits)
NFS: Improve readpage/writepage tracing
NFS: Improve O_DIRECT tracing
NFS: Improve write error tracing
NFS: don't unhash dentry during unlink/rename
NFSv4/pnfs: Fix a use-after-free bug in open
NFS: nfs_async_write_reschedule_io must not recurse into the writeback code
SUNRPC: Don't reuse bvec on retransmission of the request
SUNRPC: Reinitialise the backchannel request buffers before reuse
NFSv4.1: RECLAIM_COMPLETE must handle EACCES
NFSv4.1 probe offline transports for trunking on session creation
SUNRPC create a function that probes only offline transports
SUNRPC export xprt_iter_rewind function
SUNRPC restructure rpc_clnt_setup_test_and_add_xprt
NFSv4.1 remove xprt from xprt_switch if session trunking test fails
SUNRPC create an rpc function that allows xprt removal from rpc_clnt
SUNRPC enable back offline transports in trunking discovery
SUNRPC create an iterator to list only OFFLINE xprts
NFSv4.1 offline trunkable transports on DESTROY_SESSION
SUNRPC add function to offline remove trunkable transports
SUNRPC expose functions for offline remote xprt functionality
...
KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
Now that the PMU is refreshed when MSR_IA32_PERF_CAPABILITIES is written
by host userspace, zero out the number of LBR records for a vCPU during
PMU refresh if PMU_CAP_LBR_FMT is not set in PERF_CAPABILITIES instead of
handling the check at run-time.
guest_cpuid_has() is expensive due to the linear search of guest CPUID
entries, intel_pmu_lbr_is_enabled() is checked on every VM-Enter, _and_
simply enumerating the same "Model" as the host causes KVM to set the
number of LBR records to a non-zero value.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
Turn vcpu_to_lbr_desc() and vcpu_to_lbr_records() into functions in order
to provide type safety, to document exactly what they return, and to
allow consuming the helpers in vmx.h. Move the definitions as necessary
(the macros "reference" to_vmx() before its definition).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
Refresh the PMU if userspace modifies MSR_IA32_PERF_CAPABILITIES. KVM
consumes the vCPU's PERF_CAPABILITIES when enumerating PEBS support, but
relies on CPUID updates to refresh the PMU. I.e. KVM will do the wrong
thing if userspace stuffs PERF_CAPABILITIES _after_ setting guest CPUID.
Opportunistically fix a curly-brace indentation.
Fixes: 56a759afcfa5 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Cc: Like Xu <like.xu.linux@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220727233424.2968356-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
Test all possible input values to verify that KVM rejects all values
except the exact host value. Due to the LBR format affecting the core
functionality of LBRs, KVM can't emulate "other" formats, so even though
there are a variety of legal values, KVM should reject anything but an
exact host match.
Suggested-by: Like Xu <like.xu.linux@gmail.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gavin Shan [Wed, 10 Aug 2022 10:41:14 +0000 (18:41 +0800)]
KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
sched_getcpu() is glibc dependent and it can simply return the CPU
ID from the registered rseq information, as Florian Weimer pointed.
In this case, it's pointless to compare the return value from
sched_getcpu() and that fetched from the registered rseq information.
Fix the issue by replacing sched_getcpu() with getcpu(), as Florian
suggested. The comments are modified accordingly by replacing
"sched_getcpu()" with "getcpu()".
Gavin Shan [Wed, 10 Aug 2022 10:41:13 +0000 (18:41 +0800)]
KVM: selftests: Make rseq compatible with glibc-2.35
The rseq information is registered by TLS, starting from glibc-2.35.
In this case, the test always fails due to syscall(__NR_rseq). For
example, on RHEL9.1 where upstream glibc-2.35 features are enabled
on downstream glibc-2.34, the test fails like below.
Fix the issue by using "../rseq/rseq.c" to fetch the rseq information,
registred by TLS if it exists. Otherwise, we're going to register our
own rseq information as before.
Oliver Upton [Wed, 20 Jul 2022 09:22:51 +0000 (09:22 +0000)]
KVM: Actually create debugfs in kvm_create_vm()
Doing debugfs creation after vm creation leaves things in a
quasi-initialized state for a while. This is further complicated by the
fact that we tear down debugfs from kvm_destroy_vm(). Align debugfs and
stats init/destroy with the vm init/destroy pattern to avoid any
headaches.
Note the fix for a benign mistake in error handling for calls to
kvm_arch_create_vm_debugfs() rolled in. Since all implementations of
the function return 0 unconditionally it isn't actually a bug at
the moment.
Lastly, tear down debugfs/stats data in the kvm_create_vm_debugfs()
error path. Previously it was safe to assume that kvm_destroy_vm() would
take out the garbage, that is no longer the case.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-6-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Wed, 20 Jul 2022 09:22:50 +0000 (09:22 +0000)]
KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
At the time the VM fd is used in kvm_create_vm_debugfs(), the fd has
been allocated but not yet installed. It is only really useful as an
identifier in strings for the VM (such as debugfs).
Treat it exactly as such by passing the string name of the fd to
kvm_create_vm_debugfs(), futureproofing against possible misuse of the
VM fd.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-5-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Wed, 20 Jul 2022 09:22:49 +0000 (09:22 +0000)]
KVM: Get an fd before creating the VM
Allocate a VM's fd at the very beginning of kvm_dev_ioctl_create_vm() so
that KVM can use the fd value to generate strigns, e.g. for debugfs,
when creating and initializing the VM.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Wed, 20 Jul 2022 09:22:48 +0000 (09:22 +0000)]
KVM: Shove vcpu stats_id init into kvm_vcpu_init()
Initialize stats_id alongside other kvm_vcpu fields to make it more
difficult to unintentionally access stats_id before it's set.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-3-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Wed, 20 Jul 2022 09:22:47 +0000 (09:22 +0000)]
KVM: Shove vm stats_id init into kvm_create_vm()
Initialize stats_id alongside other struct kvm fields to make it more
difficult to unintentionally access stats_id before it's set. While at
it, move the format string to the first line of the call and fix the
indentation of the second line.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20220720092259.3491733-2-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
Add compile-time and init-time sanity checks to ensure that the MMIO SPTE
mask doesn't overlap the MMIO SPTE generation or the MMU-present bit.
The generation currently avoids using bit 63, but that's as much
coincidence as it is strictly necessarly. That will change in the future,
as TDX support will require setting bit 63 (SUPPRESS_VE) in the mask.
Explicitly carve out the bits that are allowed in the mask so that any
future shuffling of SPTE bits doesn't silently break MMIO caching (KVM
has broken MMIO caching more than once due to overlapping the generation
with other things).
Suggested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20220805194133.86299-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mingwei Zhang [Sun, 7 Aug 2022 05:21:41 +0000 (05:21 +0000)]
KVM: x86/mmu: rename trace function name for asynchronous page fault
Rename the tracepoint function from trace_kvm_async_pf_doublefault() to
trace_kvm_async_pf_repeated_fault() to make it clear, since double fault
has nothing to do with this trace function.
Asynchronous Page Fault (APF) is an artifact generated by KVM when it
cannot find a physical page to satisfy an EPT violation. KVM uses APF to
tell the guest OS to do something else such as scheduling other guest
processes to make forward progress. However, when another guest process
also touches a previously APFed page, KVM halts the vCPU instead of
generating a repeated APF to avoid wasting cycles.
Double fault (#DF) clearly has a different meaning and a different
consequence when triggered. #DF requires two nested contributory exceptions
instead of two page faults faulting at the same address. A prevous bug on
APF indicates that it may trigger a double fault in the guest [1] and
clearly this trace function has nothing to do with it. So rename this
function should be a valid choice.
Coleman Dietsch [Mon, 8 Aug 2022 19:06:07 +0000 (14:06 -0500)]
KVM: x86/xen: Stop Xen timer before changing IRQ
Stop Xen timer (if it's running) prior to changing the IRQ vector and
potentially (re)starting the timer. Changing the IRQ vector while the
timer is still running can result in KVM injecting a garbage event, e.g.
vm_xen_inject_timer_irqs() could see a non-zero xen.timer_pending from
a previous timer but inject the new xen.timer_virq.
Coleman Dietsch [Mon, 8 Aug 2022 19:06:06 +0000 (14:06 -0500)]
KVM: x86/xen: Initialize Xen timer only once
Add a check for existing xen timers before initializing a new one.
Currently kvm_xen_init_timer() is called on every
KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG
crash when vcpu->arch.xen.timer is already set.
KVM: SVM: Disable SEV-ES support if MMIO caching is disable
Disable SEV-ES if MMIO caching is disabled as SEV-ES relies on MMIO SPTEs
generating #NPF(RSVD), which are reflected by the CPU into the guest as
a #VC. With SEV-ES, the untrusted host, a.k.a. KVM, doesn't have access
to the guest instruction stream or register state and so can't directly
emulate in response to a #NPF on an emulated MMIO GPA. Disabling MMIO
caching means guest accesses to emulated MMIO ranges cause #NPF(!PRESENT),
and those flavors of #NPF cause automatic VM-Exits, not #VC.
Adjust KVM's MMIO masks to account for the C-bit location prior to doing
SEV(-ES) setup, and document that dependency between adjusting the MMIO
SPTE mask and SEV(-ES) setup.
Fixes: f0bf9a350a2d ("KVM: x86/mmu: Add module param to disable MMIO caching (for testing)") Reported-by: Michael Roth <michael.roth@amd.com> Tested-by: Michael Roth <michael.roth@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220803224957.1285926-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
Fully re-evaluate whether or not MMIO caching can be enabled when SPTE
masks change; simply clearing enable_mmio_caching when a configuration
isn't compatible with caching fails to handle the scenario where the
masks are updated, e.g. by VMX for EPT or by SVM to account for the C-bit
location, and toggle compatibility from false=>true.
Snapshot the original module param so that re-evaluating MMIO caching
preserves userspace's desire to allow caching. Use a snapshot approach
so that enable_mmio_caching still reflects KVM's actual behavior.
Fixes: ada6c24851a3 ("KVM: x86/mmu: Use enable_mmio_caching to track if MMIO caching is enabled") Reported-by: Michael Roth <michael.roth@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Tested-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-Id: <20220803224957.1285926-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Tag kvm_mmu_x86_module_init() with __init
Mark kvm_mmu_x86_module_init() with __init, the entire reason it exists
is to initialize variables when kvm.ko is loaded, i.e. it must never be
called after module initialization.
Fixes: 335aa133e6a5 ("KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220803224957.1285926-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Michal Luczaj [Fri, 29 Jul 2022 13:48:01 +0000 (15:48 +0200)]
KVM: x86: emulator: Fix illegal LEA handling
The emulator mishandles LEA with register source operand. Even though such
LEA is illegal, it can be encoded and fed to CPU. In which case real
hardware throws #UD. The emulator, instead, returns address of
x86_emulate_ctxt._regs. This info leak hurts host's kASLR.
Tell the decoder that illegal LEA is not to be emulated.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20220729134801.1120-1-mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: X86: avoid uninitialized 'fault.async_page_fault' from fixed-up #PF
kvm_fixup_and_inject_pf_error() was introduced to fixup the error code(
e.g., to add RSVD flag) and inject the #PF to the guest, when guest
MAXPHYADDR is smaller than the host one.
When it comes to nested, L0 is expected to intercept and fix up the #PF
and then inject to L2 directly if
- L2.MAXPHYADDR < L0.MAXPHYADDR and
- L1 has no intention to intercept L2's #PF (e.g., L2 and L1 have the
same MAXPHYADDR value && L1 is using EPT for L2),
instead of constructing a #PF VM Exit to L1. Currently, with PFEC_MASK
and PFEC_MATCH both set to 0 in vmcs02, the interception and injection
may happen on all L2 #PFs.
However, failing to initialize 'fault' in kvm_fixup_and_inject_pf_error()
may cause the fault.async_page_fault being NOT zeroed, and later the #PF
being treated as a nested async page fault, and then being injected to L1.
Instead of zeroing 'fault' at the beginning of this function, we mannually
set the value of 'fault.async_page_fault', because false is the value we
really expect.
Fixes: 09f841dd6741d ("KVM: x86: Add helper functions for illegal GPA checking and page fault injection")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216178 Reported-by: Yang Lixiao <lixiao.yang@intel.com> Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220718074756.53788-1-yu.c.zhang@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Bug the VM if an accelerated x2APIC trap occurs on a "bad" reg
Bug the VM if retrieving the x2APIC MSR/register while processing an
accelerated vAPIC trap VM-Exit fails. In theory it's impossible for the
lookup to fail as hardware has already validated the register, but bugs
happen, and not checking the result of kvm_lapic_msr_read() would result
in consuming the uninitialized "val" if a KVM or hardware bug occurs.
Fixes: 13fd57cb3992 ("KVM: x86: Do not block APIC write for non ICR registers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220804235028.1766253-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 4 Aug 2022 13:28:32 +0000 (15:28 +0200)]
KVM: x86: do not report preemption if the steal time cache is stale
Commit a4317b8a36c4 ("KVM: x86: Fix recording of guest steal time
/ preempted status", 2021-11-11) open coded the previous call to
kvm_map_gfn, but in doing so it dropped the comparison between the cached
guest physical address and the one in the MSR. This cause an incorrect
cache hit if the guest modifies the steal time address while the memslots
remain the same. This can happen with kexec, in which case the preempted
bit is written at the address used by the old kernel instead of
the old one.
Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Fixes: a4317b8a36c4 ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 4 Aug 2022 13:28:32 +0000 (15:28 +0200)]
KVM: x86: revalidate steal time cache if MSR value changes
Commit a4317b8a36c4 ("KVM: x86: Fix recording of guest steal time
/ preempted status", 2021-11-11) open coded the previous call to
kvm_map_gfn, but in doing so it dropped the comparison between the cached
guest physical address and the one in the MSR. This cause an incorrect
cache hit if the guest modifies the steal time address while the memslots
remain the same. This can happen with kexec, in which case the steal
time data is written at the address used by the old kernel instead of
the old one.
While at it, rename the variable from gfn to gpa since it is a plain
physical address and not a right-shifted one.
Reported-by: Dave Young <ruyang@redhat.com> Reported-by: Xiaoying Yan <yiyan@redhat.com> Analyzed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org Fixes: a4317b8a36c4 ("KVM: x86: Fix recording of guest steal time / preempted status") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 10 Aug 2022 18:55:27 +0000 (14:55 -0400)]
selftests: kvm: fix compilation
Commit a52420211bd5 ("selftests: drop KSFT_KHDR_INSTALL make target")
dropped from tools/testing/selftests/lib.mk the code related to KSFT_KHDR_INSTALL,
but in doing so it also dropped the definition of the ARCH variable. The ARCH
variable is used in several subdirectories, but kvm/ is the only one of these
that was using KSFT_KHDR_INSTALL.
As a result, kvm selftests cannot be built anymore:
In file included from include/x86_64/vmx.h:12,
from x86_64/vmx_pmu_caps_test.c:18:
include/x86_64/processor.h:15:10: fatal error: asm/msr-index.h: No such file or directory
15 | #include <asm/msr-index.h>
| ^~~~~~~~~~~~~~~~~
In file included from ../../../../tools/include/asm/atomic.h:6,
from ../../../../tools/include/linux/atomic.h:5,
from rseq_test.c:15:
../../../../tools/include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/cmpxchg.h: No such file or directory
11 | #include <asm/cmpxchg.h>
| ^~~~~~~~~~~~~~~
Fix it by including the definition that was present in lib.mk.
Fixes: a52420211bd5 ("selftests: drop KSFT_KHDR_INSTALL make target") Cc: Guillaume Tucker <guillaume.tucker@collabora.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Wed, 10 Aug 2022 18:30:16 +0000 (11:30 -0700)]
Merge tag 'hwmon-fixes-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions in nct6775 and lm90 drivers"
* tag 'hwmon-fixes-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix platform driver suspend regression
hwmon: (lm90) Fix error return value from detect function
Linus Torvalds [Wed, 10 Aug 2022 18:18:00 +0000 (11:18 -0700)]
Merge tag 'mm-stable-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull remaining MM updates from Andrew Morton:
"Three patch series - two that perform cleanups and one feature:
- hugetlb_vmemmap cleanups from Muchun Song
- hardware poisoning support for 1GB hugepages, from Naoya Horiguchi
- highmem documentation fixups from Fabio De Francesco"
* tag 'mm-stable-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
Documentation/mm: add details about kmap_local_page() and preemption
highmem: delete a sentence from kmap_local_page() kdocs
Documentation/mm: rrefer kmap_local_page() and avoid kmap()
Documentation/mm: avoid invalid use of addresses from kmap_local_page()
Documentation/mm: don't kmap*() pages which can't come from HIGHMEM
highmem: specify that kmap_local_page() is callable from interrupts
highmem: remove unneeded spaces in kmap_local_page() kdocs
mm, hwpoison: enable memory error handling on 1GB hugepage
mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage
mm, hwpoison: make __page_handle_poison returns int
mm, hwpoison: set PG_hwpoison for busy hugetlb pages
mm, hwpoison: make unpoison aware of raw error info in hwpoisoned hugepage
mm, hwpoison, hugetlb: support saving mechanism of raw error pages
mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry
mm/hugetlb: check gigantic_page_runtime_supported() in return_unused_surplus_pages()
mm: hugetlb_vmemmap: use PTRS_PER_PTE instead of PMD_SIZE / PAGE_SIZE
mm: hugetlb_vmemmap: move code comments to vmemmap_dedup.rst
mm: hugetlb_vmemmap: improve hugetlb_vmemmap code readability
mm: hugetlb_vmemmap: replace early_param() with core_param()
mm: hugetlb_vmemmap: move vmemmap code related to HugeTLB to hugetlb_vmemmap.c
...
Linus Torvalds [Wed, 10 Aug 2022 18:07:26 +0000 (11:07 -0700)]
Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for 6.0:
- Introduce a 'struct cxl_region' object with support for
provisioning and assembling persistent memory regions.
- Introduce alloc_free_mem_region() to accompany the existing
request_free_mem_region() as a method to allocate physical memory
capacity out of an existing resource.
- Export insert_resource_expand_to_fit() for the CXL subsystem to
late-publish CXL platform windows in iomem_resource.
- Add a polled mode PCI DOE (Data Object Exchange) driver service and
use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
Table)"
* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
cxl/hdm: Fix skip allocations vs multiple pmem allocations
cxl/region: Disallow region granularity != window granularity
cxl/region: Fix x1 interleave to greater than x1 interleave routing
cxl/region: Move HPA setup to cxl_region_attach()
cxl/region: Fix decoder interleave programming
Documentation: cxl: remove dangling kernel-doc reference
cxl/region: describe targets and nr_targets members of cxl_region_params
cxl/regions: add padding for cxl_rr_ep_add nested lists
cxl/region: Fix IS_ERR() vs NULL check
cxl/region: Fix region reference target accounting
cxl/region: Fix region commit uninitialized variable warning
cxl/region: Fix port setup uninitialized variable warnings
cxl/region: Stop initializing interleave granularity
cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
cxl/acpi: Minimize granularity for x1 interleaves
cxl/region: Delete 'region' attribute from root decoders
cxl/acpi: Autoload driver for 'cxl_acpi' test devices
cxl/region: decrement ->nr_targets on error in cxl_region_attach()
cxl/region: prevent underflow in ways_to_cxl()
cxl/region: uninitialized variable in alloc_hpa()
...
projects / kernel.git / log