test: don't change console timeout in EFI selftest.
Changing the console timeout to 500 ms without restoring the original value
leads to failures in other tests. As the console timeout change is not
necessary for the text input protocol tests remove it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Masahisa Kojima [Thu, 26 May 2022 10:09:38 +0000 (19:09 +0900)]
bootmenu: U-Boot console is enabled as default
The commit 6202de39bb5a ("bootmenu: add Kconfig option
not to enter U-Boot console") disables to enter U-Boot
console from bootmenu as default, this change affects the
existing bootmenu users.
This commit reverts the default behavior, the bootmenu can
enter U-Boot console same as before.
CMD_BOOTMENU_ENTER_UBOOT_CONSOLE is renamed
BOOTMENU_DISABLE_UBOOT_CONSOLE and depends on
AUTOBOOT_MENU_SHOW.
Fixes: 6202de39bb5a ("bootmenu: add Kconfig option not to enter U-Boot console") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Tested-by: Pali Rohar <pali@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This documents some additional options which can be used with valgrind, as
well as directions for future work. It also fixes up inline literals to
actually be inline literals (and not italics). The content of this
documentation is primarily adapted from [1].
Sean Anderson [Fri, 27 May 2022 14:03:00 +0000 (10:03 -0400)]
valgrind: Disable on Risc-V
There are no defined instruction sequences in include/valgrind.h for
Risc-V, so CONFIG_VALGRIND will do nothing on this arch (and possibly won't
compile?). Update Kconfig accordingly.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Fri, 27 May 2022 12:48:47 +0000 (08:48 -0400)]
Merge branch '2022-05-26-assorted-fixes'
- Fixes for pytest timeout in CI, missing dependency on PCI for the
e1000 driver, fix for CVE-2022-30767 (NFS), TI K3 AM642 DTS bugfix,
MAINTAINERS updates, mksquashfs version check fix.
Sean Anderson [Tue, 26 Apr 2022 18:35:33 +0000 (14:35 -0400)]
net: e1000: Depend on CONFIG_PCI
This driver depends on PCI. Update the Kconfig accordingly.
Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Georgi Vlaev [Fri, 20 May 2022 12:30:26 +0000 (15:30 +0300)]
arm: dts: k3-am642-*: Mark the memory node with u-boot, dm-spl
Since commit c5b098566c ("board: ti: am64x: Use fdt functions
for ram and bank init") ddr_init() and dram_bank_init() have
switched to fdtdec for getting the memory configuration from
the am64xx dts files instead of using hardcoded values. This
requires an accessible memory node in SPL as we already have
in k3-am642-r5-evm.dts.
Make the memory node accessible in A53 SPL for both am642-sk
and am642-evm and in am642-sk R5 SPL.
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Joel Stanley [Thu, 19 May 2022 00:36:33 +0000 (10:06 +0930)]
MAINTAINERS: aspeed: Add more files and myself as a reviewer
Add the rest of the ASPEED drivers that are in tree. Most are obvious,
except for ftgmac100 which matches the register layout used in the
ASPEED SoC.
I am the Linux maintainer for the ASPEED kernel port, and help maintain
the fork of u-boot used for OpenBMC, so add myself as a reviewer so I
can stay informed about u-boot changes.
Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
This patch mitigates the vulnerability identified via CVE-2019-14196.
The previous patch was bypassed/ineffective, and now the vulnerability
is identified via CVE-2022-30767. The patch removes the sanity check
introduced to mitigate CVE-2019-14196 since it's ineffective.
filefh3_length is changed to unsigned type integer, preventing negative
numbers from being used during comparison with positive values during
size sanity checks.
Signed-off-by: Andrea zi0Black Cappa <zi0Black@protonmail.com>
Bin Meng [Tue, 24 May 2022 04:31:14 +0000 (12:31 +0800)]
riscv: qemu: Set kernel_comp_addr_r for compressed kernel
Set kernel_comp_addr_r and kernel_comp_size for compressed kernel.
Adjust existing addresses for ramdisk, so that kernel_comp_addr_r
comes before the ramdisk image, since the decompressed kernel size
is known to us. This way we can allow big ramdisk image to be loaded.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Tue, 24 May 2022 04:31:13 +0000 (12:31 +0800)]
riscv: sifive: unleashed: Set kernel_comp_addr_r for compressed kernel
Set kernel_comp_addr_r and kernel_comp_size for compressed kernel.
Adjust existing addresses for ramdisk, so that kernel_comp_addr_r
comes before the ramdisk image, since the decompressed kernel size
is known to us. This way we can allow big ramdisk image to be loaded.
Update unleashed.rst to remove the manual environment configuration
for compressed kernel boot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Tue, 24 May 2022 04:31:12 +0000 (12:31 +0800)]
riscv: sifive: unmatched: Adjust for big ramdisk image
Move kernel_comp_addr_r to an address that comes before the ramdisk
image, since the decompressed kernel size is known to us. This way
we can allow big ramdisk image to be loaded.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Michal Simek [Wed, 18 May 2022 10:54:01 +0000 (12:54 +0200)]
riscv: remove CONFIG_ARCH_MAP_SYSMEM from io.h
Commit d4f9029a46f8 ("Convert CONFIG_ARCH_MAP_SYSMEM to Kconfig") clearly
defined that this option is available for SANDBOX (was also for already
removed NDS32). That's why there is no way how this code can be enabled
with current Kconfig layout for riscv.
Based on this removing this code.
Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The sbi command displays the ID of the implementation of the RISC-V
Supervisor Binary Interface Specification. A new ID for Coffer has recently
been added.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Rick Chen [Wed, 20 Apr 2022 01:23:51 +0000 (09:23 +0800)]
riscv: ae350: Fix OF_BOARD boot failure
Disable BINMAN_FDT for ae350 boards which don't actually use it.
Fixes: 8578e9c53e1a ("fdt: Make OF_BOARD a bool option") Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Rick Chen [Wed, 20 Apr 2022 01:14:05 +0000 (09:14 +0800)]
riscv: ae350: Fix OF_BOARD boot failure
Enable OF_HAS_PRIOR_STAGE for ae350 boards with OF_BOARD
Fixes: 6d510c655b5e ("fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARD") Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tom Rini [Wed, 25 May 2022 13:50:08 +0000 (09:50 -0400)]
Merge tag 'xilinx-for-v2022.07-rc4' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2022.07-rc4
zynqmp:
- Fix DP PLL configuration for zcu102/zcu106 and SOM
- Fix split mode for starting R5s
- DT fixes
- Remove firmware node for mini configurations
- Wire TEE for multi DTB fit image
Tom Rini [Wed, 25 May 2022 03:29:00 +0000 (23:29 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
The bulk of it is (finally!) some DT sync from the kernel. We refrained
from syncing one incompatible change, as this would spoil booting Linux
kernels before v5.13 with U-Boot's DT (via UEFI, for instance).
I test booted Linux v5.18 and v5.4 with that new DT on some boards, and
the headless peripherals (MMC, USB, Ethernet) seemed to work.
The rest are fixes:
- silencing missing clock warnings due to the new pinctrl driver
- fixing "UART0 on PortF", allowing UART access through the SD card pins
- add an F1C100s clock driver, to enable MMC support (SPI comes later)
- some cleanups for CONS_INDEX_n in Kconfig
Tested on BananaPi-M1, Pine64-LTS, Pine-H64, X96-Mate (H616) and
OrangePi-Zero.
These were only ever implied by sunxi platforms, and that usage has
been removed. Current practice is to specify CONFIG_CONS_INDEX in each
board's defconfig.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Mon, 9 May 2022 05:10:54 +0000 (00:10 -0500)]
sunxi: Remove obsolete Kconfig selections
ARCH_SUNXI selects DM_SERIAL, so the condition can never be satisfied.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Thu, 5 May 2022 23:34:39 +0000 (00:34 +0100)]
sunxi: board: Fix UART PortF pinmux setup
When CONFIG_UART0_PORT_F is defined, we try to configure two PortF pins
(usually used for the SD card) as UART0. Some SoCs use the mux value of
3 for this, while others use 4.
The combination of Kconfig symbols we currently use was not quite right:
we mis-configure the A31, A64, H6 and H616.
Going through the list in the pinctrl driver, there are only a few older
SoCs that use a value of 4, so revert the #ifdef clause, and name those
explicitly, instead of the other way around.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
Andre Przywara [Thu, 5 May 2022 00:25:43 +0000 (01:25 +0100)]
clk: sunxi: add and use dummy gate clocks
Some devices enumerate various clocks in their DT, and many drivers
just blanketly try to enable all of them. This creates problems
since we only model a few gate clocks, and the clock driver outputs
a warning when a clock is not described:
=========
sunxi_set_gate: (CLK#3) unhandled
=========
Some clocks don't have an enable bit, or are already enabled in a
different way, so we might want to just ignore them.
Add a CCU_CLK_F_DUMMY_GATE flag that indicates that case, and define
a GATE_DUMMY macro that can be used in the clock description array.
Define a few clocks, used by some pinctrl devices, that way to suppress
the runtime warnings.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
Andre Przywara [Wed, 4 May 2022 21:10:28 +0000 (22:10 +0100)]
clk: sunxi: add PIO bus gate clocks
The introduction of the DM pinctrl driver made its probe function enable
all clocks enumerated in the DT. This includes the "CLK_BUS_PIO" (and
variations) gate clock. Also CLK_PLL_PERIPH0 is used by the R_CCU device.
So far we didn't describe those clocks in our clock driver.
As we enable them already in the SPL, the devices happen to work, but
the clock driver still complains about not finding those clocks:
=========
sunxi_set_gate: (CLK#58) unhandled
=========
Add the one-liners that are needed to announce the gate bit for those
clocks, to silence that message on the console.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Sat, 23 Apr 2022 21:07:16 +0000 (16:07 -0500)]
clk: sunxi: h6_r: Correct the driver name
H6 is from the sun50i family, not sun6i.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Now that the pinmux conflict is handled in the board code (by skipping
setup for the one conflicting MMC controller), the driver does not need
to be entirely disabled based on the UART pinmux.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 10 Apr 2022 05:13:33 +0000 (00:13 -0500)]
sunxi: Skip MMC0 init when its pinmux conflicts with UART0
Currently, selecting UART0_PORT_F entirely disables MMC support on sunxi
platforms. But this is a bigger hammer then needed. Muxing UART0 to the
pins on port F only causes a conflict with MMC0, so minimize the impact
by specifically skipping MMC0 init. We can continue to use MMC1/2 if
those are enabled.
Let's also remove the preprocessor check while refacting this function.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tom Rini [Mon, 23 May 2022 17:52:53 +0000 (13:52 -0400)]
Merge branch '2022-05-23-regression-fixes'
- Fix PowerPC NOR booting, important SPI uclass fixes/updates, gic_v2
fix when CPU is not in EL3, fsl_esdhc_spl fix, and squashfs fix for
linking on some architectures, and fix phy_string_for_interface
Tim Harvey [Tue, 10 May 2022 22:49:10 +0000 (15:49 -0700)]
net: fix phy_string_for_interface
commit b677f1f1e41a ("treewide: Rename PHY_INTERFACE_MODE_NONE to
PHY_INTERFACE_MODE_NA") broke the phy_string_for_interface function.
Fix it.
Fixes b677f1f1e41a ("treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Cc: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Eddie James [Fri, 13 May 2022 18:30:00 +0000 (13:30 -0500)]
tpm: add support for TPMv2.x I2C chips
Add the tpm2_tis_i2c driver that should support any TPMv2 compliant
I2C chips, such as the NPCT75X chip.
[Ilias rename priv_auto_alloc_size to priv_auto] Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Pali Rohár [Wed, 11 May 2022 18:28:28 +0000 (20:28 +0200)]
mmc: fsl_esdhc_spl: Fix checking for number of read sectors
Commit d1c4d1f26b31 ("mmc: fsl_esdhc_spl: pre-PBL: implement redundancy
support") changed number of sectors which are read but did not adjusted
error check.
Fix it and check for if correct number of sectors were read.
Patrice Chotard [Wed, 30 Mar 2022 07:33:14 +0000 (09:33 +0200)]
spi: spi_flash_probe_bus_cs() rely on DT for spi speed and mode
Now, spi_flash_probe_bus_cs() relies on DT for spi speed and mode
and logically calls spi_get_bus_and_cs(). In case spi mode and speed are
not read from DT, make usage of spi_flash_probe() instead.
To sum-up:
- Previous call tree was:
spi_flash_probe() -> spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()
- Current call tree is:
spi_flash_probe() -> _spi_get_bus_and_cs()
spi_flash_probe_bus_cs() -> spi_get_bus_and_cs()
This patch impacts the following :
- cmd/sf.c: if spi mode and/or speed is passed in argument of
do_spi_flash_probe(), call spi_flash_probe() otherwise call
spi_flash_probe_bus_cs().
- drivers/net/fm/fm.c: as by default spi speed and mode was set to
0 and a comment indicates that speed and mode are read from DT,
use spi_flash_probe_bus_cs().
- drivers/net/pfe_eth/pfe_firmware.c: spi speed and mode are not read
from DT by all platforms using this driver, so keep legacy and replace
spi_flash_probe_bus_cs() by spi_flash_probe();
- drivers/net/sni_netsec.c : spi speed and mode are not read from DT,
so replace spi_flash_probe_bus_cs() by spi_flash_probe().
- drivers/usb/gadget/max3420_udc.c: Can't find any platform which make
usage of this driver, nevertheless, keep legacy and replace
spi_get_bus_and_cs() by _spi_get_bus_and_cs().
- env/sf.c: a comment indicates that speed and mode are read
from DT. So use spi_flash_probe_bus_cs().
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: "Pali Rohár" <pali@kernel.org> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Anji J <anji.jagarlmudi@nxp.com> Cc: Biwen Li <biwen.li@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Patrice Chotard [Wed, 30 Mar 2022 07:33:13 +0000 (09:33 +0200)]
spi: spi-uclass: Add new spi_get_bus_and_cs() implementation
Move legacy spi_get_bus_and_cs() code to _spi_get_bus_and_cs().
Add new spi_get_bus_and_cs() implementation which rely on DT
for speed and mode and don't need any drv_name nor dev_name
parameters. This will prepare the ground for next patch.
Update all callers to use _spi_get_bus_and_cs() to keep the
same behavior.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Behun <marek.behun@nic.cz> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: "Pali Rohár" <pali@kernel.org> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Sean Anderson <seanga2@gmail.com> Cc: Anji J <anji.jagarlmudi@nxp.com> Cc: Biwen Li <biwen.li@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Chaitanya Sakinam <chaitanya.sakinam@nxp.com>
Pali Rohár [Mon, 2 May 2022 16:36:38 +0000 (18:36 +0200)]
powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support for NOR booting
Commit b0cae0c38545 ("powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support")
fixed SD card booting on mpc85xx boards but broke NOR booting on these
boards. Reason is that U-Boot build system for NOR images uses binman and
this binman ignores alignment defined in linker script. Instead it has own
config file where is alignment defined.
Fix binman alignment for mpc85xx boards to match what is _now_ defined in
linker script.
This change fixes building of U-Boot for NOR booting on P2020 board.
Sean Nyekjaer [Thu, 12 May 2022 18:37:14 +0000 (20:37 +0200)]
fs/squashfs: use lldiv function for math
When compling for x86:
ld.bfd: fs/squashfs/sqfs.o: in function `sqfs_read':
u-boot/fs/squashfs/sqfs.c:1443: undefined reference to `__udivmoddi4'
ld.bfd: u-boot/fs/squashfs/sqfs.c:1521: undefined reference to `__udivmoddi4'
Eddie James [Fri, 13 May 2022 18:29:59 +0000 (13:29 -0500)]
tpm: core: Set timeouts before requesting locality
Requesting the locality uses the timeout values, so they need
to be set beforehand.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Marek Vasut [Sat, 21 May 2022 14:56:26 +0000 (16:56 +0200)]
ARM: dts: imx: Add support for DH electronics i.MX8M Plus DHCOM and PDK2
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board.
Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD,
SPI NOR and USB 3.0 host.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 8 May 2022 00:19:12 +0000 (02:19 +0200)]
ARM: imx: mx5: Convert MX53 Menlo board to DM I2C and DM RTC
Convert the board to DM I2C and DM RTC. This leads to removal of board
side iomuxc configuration, which is now done using pin control driver,
and conversion of board side legacy I2C accessors to DM ones.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
Andre Przywara [Tue, 26 Apr 2022 23:19:07 +0000 (00:19 +0100)]
Revert "sunxi: f1c100s: Drop SYSRESET to enable reset functionality"
The original Allwinner F1C100 .dtsi imported from the Linux kernel tree
used the wrong compatible string for the watchdog timer, so the Allwinner
DM reset driver was not working properly. We worked around this by
disabling the SYSRESET driver, so the hardcoded SPL reset driver took
over.
Now the issue was fixed in the DTs in mainline Linux, and we synced the
fixed .dtsi file into U-Boot, so drop the hack and use the normal U-Boot
proper reset infrastructure.
Andre Przywara [Tue, 26 Apr 2022 00:15:25 +0000 (01:15 +0100)]
sunxi: F1C100s: update DT files from Linux
The initial U-Boot F1C100s port was based on the mainline kernel DT
files, which were quite basic and were missing the essential MMC and
SPI peripherals. While we could work around this in the SPL by
hardcoding the required information, this left U-Boot proper without SD
card or SPI flash support, so actual loading would require FEL boot.
Now the missing DT bits have been submitted and accepted in the kernel
tree, so lets sync back those files into U-Boot to enable MMC and
SPI, plus benefit from some fixes.
This is a verbatim copy of the .dts and .dtsi file from
linux-sunxi/dt-for-5.19[1], which have been part of linux-next for a
while as well.
George Hilliard [Sun, 25 Jul 2021 23:16:23 +0000 (19:16 -0400)]
clk: sunxi: implement clock driver for suniv f1c100s
The f1c100s has a clock tree similar to those of other sunxi parts.
Add support for it.
Signed-off-by: George Hilliard <thirtythreeforty@gmail.com> Signed-off-by: Yifan Gu <me@yifangu.com> Acked-by: Sean Anderson <seanga2@gmail.com>
[Andre: add PIO and I2C] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Wed, 27 Apr 2022 20:31:31 +0000 (15:31 -0500)]
ARM: dts: sun50i: H6: Sync from Linux v5.18-rc1
Copy the devicetree source for the H6 SoC and all existing boards
from the Linux v5.18-rc1 tag.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 189bef235dd3 and 73088dfee635.
This commit also adds the following new board devicetrees:
- sun50i-h6-pine-h64-model-b.dts
- sun50i-h6-tanix-tx6-mini.dts
This update should not impact any existing U-Boot functionality.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Wed, 27 Apr 2022 20:31:30 +0000 (15:31 -0500)]
ARM: dts: sun50i: A64: Sync from Linux v5.18-rc1
Copy the devicetree source for the A64 SoC and all existing boards
from the Linux v5.18-rc1 tag.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 189bef235dd3 and 73088dfee635.
This update should not impact any existing U-Boot functionality.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Wed, 27 Apr 2022 20:31:27 +0000 (15:31 -0500)]
ARM: dts: sunxi: H2+/H3/H5: Sync from Linux v5.18-rc1
Copy the devicetree source for the H2+/H3/H5 SoCs and all existing
boards from the Linux v5.18-rc1 tag.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2.
This commit also adds the following new board devicetree:
- sun8i-h3-nanopi-r1.dts
This update should not impact any existing U-Boot functionality.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Wed, 27 Apr 2022 20:31:26 +0000 (15:31 -0500)]
ARM: dts: sun8i: A83T: Sync from Linux v5.18-rc1
Copy the devicetree source for the A83T SoC and all existing boards
from the Linux v5.18-rc1 tag.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2.
As with the other SoCs, updates of note include adding detection GPIO
properties in the USB PHY nodes.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Wed, 27 Apr 2022 20:31:24 +0000 (15:31 -0500)]
ARM: dts: sunxi: A13/A31/A23/A33: Sync from Linux v5.18-rc1
Copy the devicetree source for the A10s/A13/GR8, A31(s), and A23/A33/R16
SoCs and all existing boards from the Linux v5.18-rc1 tag.
These changes are combined into one commit due to interdependencies:
- The unit addresses were removed from bitbanged I2C buses, which
drives a Kconfig default change. This affects sun5i-a13-utoo-p66.dts
and sun6i-a31-colombus.dts.
- The pinctrl nodes were renamed, including some used by the shared
header sunxi-reference-design-tablet.dtsi.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2.
This commit renames the file sun8i-r16-nintendo-nes-classic-edition.dts
to sun8i-r16-nintendo-nes-classic.dts to match the Linux tree.
This commit also adds the following new board devicetrees:
- sun5i-a13-licheepi-one.dts
- sun5i-a13-pocketbook-touch-lux-3.dts
- sun5i-gr8-evb.dts
- sun8i-a23-ippo-q8h-v1.2.dts
- sun8i-a23-ippo-q8h-v5.dts
- sun8i-a33-et-q8-v1.6.dts
- sun8i-a33-ippo-q8h-v1.2.dts
- sun8i-r16-nintendo-super-nes-classic.dts
As with the other SoCs, updates of note are conversion of GPIO pull-up
from pinconf to GPIO flags and renaming the detection GPIO properties in
the USB PHY nodes.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Wed, 27 Apr 2022 20:31:22 +0000 (15:31 -0500)]
ARM: dts: sun4i: Sync from Linux v5.18-rc1
Copy the devicetree source for the A10 SoC and all existing boards
verbatim from the Linux v5.18-rc1 tag.
This commit also adds the following new board devicetree:
- sun4i-a10-topwise-a721.dts
While this update should not impact any existing U-Boot functionality,
the changes to the USB PHY detection GPIO properties are needed to
convert that driver to use the DM GPIO framework.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Samuel Holland [Wed, 27 Apr 2022 20:31:23 +0000 (15:31 -0500)]
ARM: dts: sun7i: Sync from Linux v5.18-rc1
Copy the devicetree source for the A20 SoC and all existing boards
verbatim from the Linux v5.18-rc1 tag.
This commit also adds the following new board devicetrees:
- sun7i-a20-haoyu-marsboard.dts
- sun7i-a20-linutronix-testbox-v2.dts
- sun7i-a20-olinuxino-lime-emmc.dts
This update includes changes to the USB PHY detection GPIO properties
which are needed to convert that driver to use the DM GPIO framework.
Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: fix Mele M5 U-Boot only DT] Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
ARM: imx6: Adapt device tree selection in DH board file
Before this commit device tree selection could rely solely on
differentiating the iMX6 processor variant Q and DL. After adding two new
carrier boards, the DRC02 and the picoITX, the interchangeability of SoMs
makes this approach infeasible.
It is now required to specify the carrier board (dhcom-drc02,
dhcom-picoitx or dhcom-pdk2) at compile time using
CONFIG_DEFAULT_DEVICETREE. The SoM is determined at runtime as before.
ARM: imx6: Remove CONFIG_FEC_MXC_PHYADDR from DH header
Use phy address from device tree instead of CONFIG_FEC_MXC_PHYADDR from
board header. This is required, because the DH picoITX and DRC02 boards
require different settings than PDK2. The corresponding 'phy-handle'
device tree properties are already there.
I tested this change on picoITX and DRC02, but on PDK2 it is untested.
Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
ARM: dts: imx: Migrate iMX6QDL picoITX DTs from Linux
Migrate DH picoITX device trees from Linux commit 42226c989789
(tag v5.18-rc7). No changes have been made, the DTs are exact copies.
Furthermore add the DTB to dh_imx6_defconfig.
Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
ARM: dts: imx: Migrate iMX6QDL DRC02 DTs from Linux
Migrate DH DRC02 device trees from Linux commit 42226c989789
(tag v5.18-rc7). No changes have been made, the DTs are exact copies.
Furthermore add the DTB to dh_imx6_defconfig.
Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Philip Oberfichtner <pro@denx.de>
Marek Vasut [Fri, 20 May 2022 03:10:17 +0000 (05:10 +0200)]
pmic: pca9450: Add regulator driver
Add PCA9450 regulator driver. This is complementary driver for the BUCKn
and LDOn regulators provided by the PCA9450 PMIC driver. Currently the
driver permits reading the settngs and configuring the BUCKn and LDOn
regulators.
Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Fri, 20 May 2022 03:10:16 +0000 (05:10 +0200)]
pmic: pca9450: Add upstream regulators subnode match
The upstream DT regulators node subnodes are named BUCKn and LDOn,
the downstream DT regulators node subnodes are named buckn and ldon,
add the upstream match.
Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
The Bosch ACC (Air Center Control) Board is based on the i.MX6D.
The device tree is copied from Linux, see [1]. The only difference
compared to the Linux DT is the removal of usbphynop properties. They are
defined in the Linux version of imx6qdl.dtsi, but not in the u-boot
version.
[1] Commit 6192cf8ac082 from
git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
If the fitImage has some bad block in fit image area, the
offset must be recalulcated. This should be done always.
After implementing it in mxs now is possible to call the function
even for that platform.
Cc: Fabio Estevam <festevam@gmail.com> Tested-By: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The badblock should be skipped properly in reading and writing.
Fix the logic. The bcb struct is written, skipping the bad block,
so we need to read using the same logic. This was tested create
bad block in the area and then flash it and read it back.
Acked-by: Han Xu <han.xu@nxp.com> Tested-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The specific implementation was having bug. Those bugs are since
the beginning of the implementation. Some manufactures can already
experience this bug in their SPL code. This bug can be more visible on
architecture that has complicated boot process like imx8mn. Older
version of uboot can be affected if the bad block
appear in correspoding of the beginning of u-boot image. In order to
adjust the function we scan from the first erase block.
The problematic part of old code was in this part:
while (is_badblock(mtd, offs, 1)) {
page = page + nand_page_per_block;
/* Check i we've reached the end of flash. */
if (page >= mtd->size >> chip->page_shift) {
free(page_buf);
return -ENOMEM;
}
}
Even we fix it adding increment of the offset of one erase block size
, we don't fix the problem, because the first erase block where the
image start is not checked. The code was tested on an imx8mn where
the boot rom api was not able to skip it. This code is used by other
architecures like imx6 and imx8mm
Cc: Han Xu <han.xu@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Acked-by: Han Xu <han.xu@nxp.com> Tested-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
nand: raw: mxs_nand: Fix specific hook registration
Move the hook after nand_scan_tail is called. The hook must be replaced
to the mxs specific one but those must to be assignment later in the
probe function.
With this fix markbad is working again. Before this change:
Cc: Han Xu <han.xu@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Acked-by: Han Xu <han.xu@nxp.com> Tested-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
projects / uboot.git / log