Maxime Ripard [Tue, 27 Aug 2019 12:31:31 +0000 (14:31 +0200)]
ASoC: sun4i: Revert A83t description
The last set of reworks included some fixes to change the A83t behaviour
and "fix" it.
It turns out that the controller described in the datasheet and the one
supported here are not the same, yet the A83t has the two of them, and the
one supported in the driver wasn't the one described in the datasheet.
Fix this by reintroducing the proper quirks.
Fixes: b77879bc465a ("ASoC: sun4i-i2s: Fix the LRCK period on A83t") Fixes: 42ff08bc69c6 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t") Fixes: 65806cf332a5 ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t") Fixes: d8abfb45ab25 ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs") Fixes: 76fe26cc0be8 ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs") Fixes: 4cf4dc9a3644 ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs") Fixes: b051ebb0828f ("ASoC: sun4i-i2s: Move the format configuration to a callback") Fixes: dd8363f334f4 ("ASoC: sun4i-i2s: Move the channel configuration to a callback") Reported-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/20190827123131.29129-2-mripard@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Yongjun [Mon, 26 Aug 2019 12:00:03 +0000 (12:00 +0000)]
ASoC: SOF: imx8: Fix return value check in imx8_probe()
In case of error, the function devm_ioremap_wc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: f8612cb94e5f ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/20190826120003.183279-1-weiyongjun1@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unused variable mt8183_mt6358_ts3a227_max98357_dapm_widgets and
mt8183_mt6358_ts3a227_max98357_dapm_routes. They are accidentially
included when rebasing commits.
Fixes: b517aaef9485 ("ASoC: mediatek: mt8183: switch tdm pins gpio function when playback on or off") Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20190826032642.27324-1-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
Maxime Ripard [Tue, 27 Aug 2019 09:32:05 +0000 (11:32 +0200)]
ASoC: sunxi: Revert initial A83t support
This reverts commit ce1f75d6ff58f6 (ASoC: sun4i-i2s: Remove
duplicated quirks structure").
It turns out that while one I2S controller is described in the A83t
datasheet, the driver supports another, undocumented, one that has been
inherited from the older SoCs, while the documented one uses the new
design.
Shengjiu Wang [Tue, 27 Aug 2019 15:55:15 +0000 (11:55 -0400)]
ASoC: imx-audmix: register the card on a proper dev
This platform device is registered from "fsl_audmix", which is
its parent device. If use pdev->dev.parent for the priv->card.dev,
the value set by dev_set_drvdata in parent device will be covered
by the value in child device.
Fixes: f9cef5322203 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/1566921315-23402-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
YueHaibing [Fri, 23 Aug 2019 12:59:39 +0000 (20:59 +0800)]
ASoC: SOF: imx8: Make some functions static
Fix sparse warnings:
sound/soc/sof/imx/imx8.c:104:6: warning: symbol 'imx8_dsp_handle_reply' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:115:6: warning: symbol 'imx8_dsp_handle_request' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:336:5: warning: symbol 'imx8_get_bar_index' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:341:6: warning: symbol 'imx8_ipc_msg_data' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:348:5: warning: symbol 'imx8_ipc_pcm_params' was not declared. Should it be static?
ASoC: soc-core: rename soc_post_component_init() to soc_rtd_init()
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
From function name point of view, "soc_post_component_init()" sounds
like "component initialize function".
But in reality it is rtd setup function.
This patch renames soc_post_component_init() to soc_rtd_init()
Jaska Uimonen [Wed, 21 Aug 2019 21:11:38 +0000 (00:11 +0300)]
ASoC: SOF: topology: fix get control data return type and arguments
sof_get_control_data returns negative values even though the return
value is defined unsigned (size_t). So change the return value type to
int and add the data size as pointer argument to sof_get_control_data to
avoid ambiquity in the meaning of the return type.
Fixes: 503252652c89 ("ASoC: SOF: topology: use set_get_data in process load")
Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com> Link: https://lore.kernel.org/r/20190821211138.14618-1-jaska.uimonen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
It might return without initializing in error case.
In such case, uninitialized variable might be used at error handler.
This patch initializes all necessary variable before return.
ASoC: soc-topology: use for_each_component_dais() at remove_dai()
commit a61616de66ce5 ("ASoC: topology: fix oops/use-after-free case
with dai driver") fixups remove_dai() error, but it is using
list_for_each_entry() for component->dai_list.
We already have for_each_component_dais() macro for it.
Let's use exising method.
ASoC: soc-core: add NOTE to snd_soc_rtdcom_lookup()
We can find specified name component via snd_soc_rtdcom_lookup().
But, it is not enough under multi CPU/Codec/Platform, because many
components which have same driver name might be connected to same rtd.
Not using this function as much as possible is best solution,
but some drivers are already deeply depended to it.
We can expand this function, for example having "num" which specifies
found order at parameter, etc (In such case, it need to have fixed
probing order).
Or, use different driver name in such component, etc.
We will have such issue if multi CPU/Codec/Platform were supported.
To indicate it, this patch adds NOTE to this function.
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
soc-core.c is using device_unregiser(), but there is no its paired
device_regiser(). We can find its code at soc_post_component_init()
which is using device_initialize() and device_add().
Here, device_initialize() + device_add() = device_register().
device_initialize() is doing each dev member's initialization only,
not related to device parent/release/groups.
Thus, we can postpone it.
let's use device_register() instead of device_initialize()/device_add().
Maxime Ripard [Wed, 21 Aug 2019 13:06:56 +0000 (15:06 +0200)]
ASoC: sun4i-i2s: Add support for DSP formats
In addition to the I2S format, the controller also supports the DSP_*
formats.
This requires some extra care on the LRCK period calculation, since the
controller, with the PCM formats, require that the value set is no longer
the periods of LRCK for a single channel, but for all of them.
Let's add the code to deal with this, and support the DSP_A and DSP_B
formats.
Maxime Ripard [Wed, 21 Aug 2019 13:06:55 +0000 (15:06 +0200)]
ASoC: sun4i-i2s: Replace call to params_width by local variable
The sun4i_i2s_hw_params function already has a variable holding the value
returned by params_width, so let's just use that variable instead of
calling params_width multiple times.
Maxime Ripard [Wed, 21 Aug 2019 13:06:54 +0000 (15:06 +0200)]
ASoC: sun4i-i2s: Use the actual format width instead of an hardcoded one
The LRCK period field in the FMT0 register holds the number of LRCK period
for one channel in I2S mode.
This has been hardcoded to 32, while it really should be the physical width
of the format, which creates an improper clock when using a 16bit format,
with the i2s controller as LRCK master.
Maxime Ripard [Wed, 21 Aug 2019 13:06:53 +0000 (15:06 +0200)]
ASoC: sun4i-i2s: Use the physical / slot width for the clocks
The clock dividers function has been using the word size to compute the
clock rate at which it's supposed to be running, but the proper formula
would be to use the physical width and / or slot width in TDM.
It doesn't make any difference at the moment since all the formats
supported have the same sample width and physical width, but it's not going
to last forever.
ASoC: soc-core: remove unneeded dai_link check from snd_soc_remove_dai_link()
snd_soc_remove_dai_link() has card connected dai_link check. but
1) we need to call list_del() anyway,
because it is "remove" function,
2) It is doing many thing for this card / dai_link already
before checking dai_link.
snd_soc_initialize_card_lists() is doing card related
INIT_LIST_HEAD(), but, it is already doing at
snd_soc_register_card(). We don't need to do it separately.
This patch merges these.
ASoC: mchp-i2s-mcc: Fix simultaneous capture and playback in master mode
This controller supports capture and playback running at the same time,
with the limitation that both capture and playback must be configured the
same way (sample rate, sample format, number of channels, etc). For this,
we have to assure that the configuration registers look the same when
capture and playback are initiated.
This patch fixes a bug in which the controller is in master mode and the
hw_params() callback fails for the second audio stream. The fail occurs
because the divisors are calculated after comparing the configuration
registers for capture and playback. The fix consists in calculating the
divisors before comparing the configuration registers. BCLK and LRC are
then configured and started only if the controller is not already running.
Maxime Ripard [Mon, 19 Aug 2019 19:25:26 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Support more channels
We've been limited to 2 channels in the driver while the controller
supports from 1 to 8 channels, in both capture and playback. let's remove
the hardcoded checks and numbers, and extend the range of channel numbers
we can use.
Maxime Ripard [Mon, 19 Aug 2019 19:25:25 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Pass the channels number as an argument
The channels number have been hardcoded to 2 so far, while the controller
supports more than that.
Remove the instance where it has been hardcoded to compute the BCLK
divider, and pass it through as an argument to ease further support of more
channels.
Maxime Ripard [Mon, 19 Aug 2019 19:25:20 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Fix the LRCK polarity
The LRCK polarity "normal" polarity in the I2S/TDM specs and in the
Allwinner datasheet are not the same. In the case where the i2s controller
is being used as the LRCK master, it's pretty clear when looked at under a
scope.
Let's fix this, and add a comment to clear up as much the confusion as
possible.
Maxime Ripard [Mon, 19 Aug 2019 19:25:19 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs
The LRCK and BCLK polarity offsets on newer SoCs has been
changed, yet the driver didn't take it into account for all of them.
This was taken into account for the H3, but not the A83t. This was handled
using a reg_field for the H3.
However, the value in that field will not be the same, so reg_field is not
adapted in that case. Let's change for proper calls with the regular
values.
Maxime Ripard [Mon, 19 Aug 2019 19:25:16 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs
From: Marcus Cooper <codekipper@gmail.com>
The clock division dividers have changed between the older (A10/A31) and
newer (H3, A64, etc) SoCs.
While this was addressed through an offset on some SoCs, it was missing
some dividers as well, so the support wasn't perfect. Let's introduce a
pointer in the quirk structure for the divider calculation functions to use
so we can have the proper range now.
Maxime Ripard [Mon, 19 Aug 2019 19:25:15 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs
On the first generation of Allwinner SoCs (A10-A31), the i2s controller was
using the MCLK as BCLK parent. However, this changed since the introduction
of the A83t and BCLK now uses the module clock as its parent.
Let's introduce a hook to get the parent rate and use that in our divider
calculations.
Maxime Ripard [Mon, 19 Aug 2019 19:25:12 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Move the format configuration to a callback
The two main generations of our I2S controller require a slightly different
format configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Maxime Ripard [Mon, 19 Aug 2019 19:25:11 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Move the channel configuration to a callback
The two main generations of our I2S controller require a slightly different
channel configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Daniel Stuart [Thu, 15 Aug 2019 17:12:55 +0000 (14:12 -0300)]
ASoC: intel: cht_bsw_max98090_ti: Add all Chromebooks that need pmc_plt_clk_0 quirk
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit 541c765b7fda ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Maxime Ripard [Mon, 19 Aug 2019 19:25:13 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Rework MCLK divider calculation
The MCLK divider calculation is currently computing the ideal divider using
the oversample rate, the sample rate and the parent rate.
However, since we have access to the frequency is supposed to be running at
already, and as it turns out we're using it to compute the oversample rate,
we can just use the ratio between the parent rate and the MCLK rate to
simplify a bit the formula.
Maxime Ripard [Mon, 19 Aug 2019 19:25:10 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Replace call to params_channels by local variable
The sun4i_i2s_hw_params already has a variable holding the value returned
by params_channels, so let's just use that variable instead of calling
params_channels multiple times.
Maxime Ripard [Mon, 19 Aug 2019 19:25:14 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Don't use the oversample to calculate BCLK
The BCLK divider should be calculated using the parameters that actually
make the BCLK rate: the number of channels, the sampling rate and the
sample width.
We've been using the oversample_rate previously because in the former SoCs,
the BCLK's parent is MCLK, which in turn is being used to generate the
oversample rate, so we end up with something like this:
So, bclk_div = mclk_rate / sampling_rate / word_size / channels.
And this is actually better, since the oversampling ratio only plays a role
because the MCLK is its parent, not because of what BCLK is supposed to be.
Furthermore, that assumption of MCLK being the parent has been broken on
newer SoCs, so let's use the proper formula, and have the parent rate as an
argument.
Maxime Ripard [Mon, 19 Aug 2019 19:25:09 +0000 (21:25 +0200)]
ASoC: sun4i-i2s: Switch to devm for PCM register
Since the introduction of the driver, a new managed helper for the
dmaengine PCM registration has been created. Let's use it to simplify a bit
our probe and remove functions.
Daniel Stuart [Thu, 15 Aug 2019 17:12:55 +0000 (14:12 -0300)]
ASoC: intel: cht_bsw_max98090_ti: Add all Chromebooks that need pmc_plt_clk_0 quirk
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit 541c765b7fda ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Kunihiko Hayashi [Tue, 20 Aug 2019 06:16:04 +0000 (15:16 +0900)]
ASoC: uniphier: Fix double reset assersion when transitioning to suspend state
When transitioning to supend state, uniphier_aio_dai_suspend() is called
and asserts reset lines and disables clocks.
However, if there are two or more DAIs, uniphier_aio_dai_suspend() are
called multiple times, and double reset assersion will cause.
This patch defines the counter that has the number of DAIs at first, and
whenever uniphier_aio_dai_suspend() are called, it decrements the
counter. And only if the counter is zero, it asserts reset lines and
disables clocks.
In the same way, uniphier_aio_dai_resume() are called, it increments the
counter after deasserting reset lines and enabling clocks.
Shengjiu Wang [Fri, 16 Aug 2019 05:03:14 +0000 (01:03 -0400)]
ASoC: imx-audmux: Add driver suspend and resume to support MEGA Fast
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power
source of modules during system suspend and resume procedure.
Thus, AUDMUX needs to save all the values of registers before the
system suspend and restore them after the system resume.
Pan Xiuli [Thu, 15 Aug 2019 15:57:49 +0000 (10:57 -0500)]
ASoC: SOF: Intel: initial support for Elkhart Lake
Add Kconfig, PCI ID and chip info for EHL platform.
Note that the core mask is different from previous platforms, only
Core0 can be controlled by the host. Additional patches will be
required for multi-core functionality.
Pan Xiuli [Thu, 15 Aug 2019 15:57:47 +0000 (10:57 -0500)]
ASoC: SOF: Intel: initial support for Tiger Lake.
Add Kconfig, PCI ID and chip info for Tiger Lake platform.
Note that the core mask is different from previous platforms, only
Core0 can be controlled by the host. Additional patches will be
required for multi-core functionality.
The only configuration parameter is the ALH stream ID. No range
checking is done by the driver, the firmware should check that the
stream is valid for a specific hardware.
Bump the ABI Minor number to keep the alignment with SOF firmware
Peter Ujfalusi [Tue, 13 Aug 2019 10:45:32 +0000 (13:45 +0300)]
ASoC: core: Move pcm_mutex up to card level from snd_soc_pcm_runtime
The pcm_mutex is used to prevent concurrent execution of snd_pcm_ops
callbacks. This works fine most of the cases but it can not handle setups
when the same DAI is used by different rtd, for example:
pcm3168a have two DAIs: one for Playback and one for Capture.
If the codec is connected to a single CPU DAI we need to have two dai_link
to support both playback and capture.
In this case the snd_pcm_ops callbacks can be executed in parallel causing
unexpected races in DAI drivers.
By moving the pcm_mutex up to card level this can be solved
while - hopefully - not breaking other setups.
YueHaibing [Thu, 15 Aug 2019 09:25:47 +0000 (17:25 +0800)]
ASoC: 88pm860x: remove unused variables 'pcm_switch_controls' and 'aif1_mux'
sound/soc/codecs/88pm860x-codec.c:533:38: warning:
pcm_switch_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/88pm860x-codec.c:560:38: warning:
aif1_mux defined but not used [-Wunused-const-variable=]
YueHaibing [Thu, 15 Aug 2019 09:06:02 +0000 (17:06 +0800)]
ASoC: rt1011: remove unused variable 'dac_vol_tlv' and 'adc_vol_tlv'
sound/soc/codecs/rt1011.c:981:35: warning:
dac_vol_tlv defined but not used [-Wunused-const-variable=]
sound/soc/codecs/rt1011.c:982:35: warning:
adc_vol_tlv defined but not used [-Wunused-const-variable=]
YueHaibing [Thu, 15 Aug 2019 09:01:57 +0000 (17:01 +0800)]
ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'
sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]
cs4349_runtime_pm ops already defined, it seems
we should enable it.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: fdcc5a8 ("ASoC: cs4349: Add support for Cirrus Logic CS4349") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
YueHaibing [Thu, 15 Aug 2019 08:54:54 +0000 (16:54 +0800)]
ASoC: cs42l73: remove unused variables 'vsp_output_mux' and 'xsp_output_mux'
sound/soc/codecs/cs42l73.c:276:38: warning:
vsp_output_mux defined but not used [-Wunused-const-variable=]
sound/soc/codecs/cs42l73.c:279:38: warning:
xsp_output_mux defined but not used [-Wunused-const-variable=]
Jiaxin Yu [Mon, 5 Aug 2019 04:56:37 +0000 (12:56 +0800)]
ASoC: mediatek: mt6358: add delay after dmic clock on
Most dmics produce a high level when they receive clock. The difference
between power-on and memory record time is about 10ms, but the dmic
needs 50ms to output normal data.
This commit add 100ms delay after SoC output clock so that we can cut
off the pop noise at the beginning.
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:50:1: warning:
mt8183_mt6358_ts3a227_max98357_dapm_widgets defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:55:1: warning:
mt8183_mt6358_ts3a227_max98357_dapm_routes defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:120:1: warning:
mt8183_da7219_max98357_dapm_widgets defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:124:40: warning:
mt8183_da7219_max98357_dapm_routes defined but not used [-Wunused-const-variable=]
YueHaibing [Tue, 13 Aug 2019 14:38:11 +0000 (22:38 +0800)]
ASoC: mt2701: remove unused variables
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:799:38: warning:
mt2701_afe_o23_mix defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:803:38: warning:
mt2701_afe_o24_mix defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:835:38: warning:
mt2701_afe_multi_ch_out_i2s4 defined but not used [-Wunused-const-variable=]
YueHaibing [Thu, 15 Aug 2019 09:01:57 +0000 (17:01 +0800)]
ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'
sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]
cs4349_runtime_pm ops already defined, it seems
we should enable it.
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: fdcc5a8 ("ASoC: cs4349: Add support for Cirrus Logic CS4349") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
The recent change to remove the bus->io_ops callbacks used an older
version of the SOF code base, and when merged into Mark's for-next it
invalidated changes, resulting in broken compilation identified by
kbuild and reproduced during the weekly SOF rebase.
Restore SOF code overridden by git merge and apply Takashi's intended
change in the 'right' location.
Fixes: 5e6d4e04bd1b6 ("Merge branch 'topic/hda-bus-ops-cleanup'") Reported-by: kbuild test robot <lkp@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190812190502.30729-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Cheng-Yi Chiang [Tue, 13 Aug 2019 07:44:30 +0000 (15:44 +0800)]
ASoC: rockchip: rockchip_max98090: Set period size to 240
From stress testing of arecord, we found that period size
greater than ~900 will bring pl330 to DYING state and
can not recover within 100 iterations.
The result is that arecord will stuck and get I/O error,
and issue can not be recovered until reboot.
This issue does not happen when period size is small.
Set constraint of period size to 240 to prevent such issue.
With the constraint, there will be no issue after 2000 iterations.
We can revert this patch once the root cause is found
in rockchip's pl330 implementation.
ASoC: SOF: Intel: hda: fixup HDaudio topology name with DMIC number
The SOF project maintains 6 topologies for HDaudio (iDisp or
HDaudio+iDisp, no DMIC, 2 DMICs, 4 DMICs). The user is currently
required to manually rename the topology file used in
/lib/firmware/intel/sof-tplg. We can do better to avoid such
renames and use logic to select the relevant file.
The NHLT information can be used to figure out which topology file
should be used.
Alternatively, when NHLT is not present in ACPI tables or is possibly
incorrect, a module parameter can provide that information, e.g. on
Up^2 board with the test DMIC kit.
Peter Ujfalusi [Mon, 12 Aug 2019 09:52:26 +0000 (12:52 +0300)]
ASoC: pcm3168a: Allow reconfiguration of tdm_slots and slot_width
When using right_j format and the codec is slave it can support 16bit
format, but only if slot_width == 16, in the same DAI mode the 24 bit
audio can work with 24 or 32 slot_width.
Because of this, the codec and CPU needs to be reconfigured when the sample
format changes.
ASoC: dapm: Invalidate only paths reachable for a given stream
By resetting the cached number of endpoints for all card's widgets we may
overwrite previously cached values for other streams. The situation may
happen especially when running streams simultaneously.
projects / kernel.git / log