Colin Ian King [Tue, 5 Nov 2019 15:03:59 +0000 (15:03 +0000)]
crypto: allwinner - fix some spelling mistakes
There are spelling mistakes in dev_warn and dev_err messages. Fix these.
Change "recommandation" to "recommendation" and "tryed" to "tried".
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng: atmel - add new platform support for sam9x60
Add platform support for the new IP found on sam9x60 SoC. For this
version, if the peripheral clk is above 100MHz, the HALFR bit must be
set. This bit is available only if the IP can generate a random number
every 168 cycles (instead of 84).
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tudor Ambarus [Fri, 1 Nov 2019 16:40:37 +0000 (16:40 +0000)]
crypto: atmel - Fix selection of CRYPTO_AUTHENC
The following error is raised when CONFIG_CRYPTO_DEV_ATMEL_AES=y and
CONFIG_CRYPTO_DEV_ATMEL_AUTHENC=m:
drivers/crypto/atmel-aes.o: In function `atmel_aes_authenc_setkey':
atmel-aes.c:(.text+0x9bc): undefined reference to `crypto_authenc_extractkeys'
Makefile:1094: recipe for target 'vmlinux' failed
Fix it by moving the selection of CRYPTO_AUTHENC under
config CRYPTO_DEV_ATMEL_AES.
Fixes: 3a6e8fa924bb ("crypto: atmel-authenc - add support to...") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zhou Wang [Fri, 1 Nov 2019 12:21:49 +0000 (20:21 +0800)]
crypto: hisilicon - replace #ifdef with IS_ENABLED for CONFIG_NUMA
Replace #ifdef CONFIG_NUMA with IS_ENABLED(CONFIG_NUMA) to fix kbuild error.
Fixes: db7c11d7dec3 ("crypto: hisilicon - fix to return...") Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr
This patch fixes a crash that can happen during probe
when the available dma memory is not enough (this can
happen if the crypto4xx is built as a module).
The descriptor window mapping would end up being free'd
twice, once in crypto4xx_build_pdr() and the second time
in crypto4xx_destroy_sdr().
Fixes: e7935b2d4a89 ("crypto: crypto4xx - fix crypto4xx_build_pdr, crypto4xx_build_sdr leak") Cc: <stable@vger.kernel.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Colin Ian King [Tue, 29 Oct 2019 11:32:30 +0000 (11:32 +0000)]
crypto: amlogic - ensure error variable err is set before returning it
Currently when the call to crypto_engine_alloc_init fails the error
return path returns an uninitialized value in the variable err. Fix
this by setting err to -ENOMEM.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 0e9a1b234cc7 ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch restores the CRYPTO_AES dependency. This is
necessary since some of the crypto4xx driver provided
modes need functioning software fallbacks for
AES-CTR/CCM and GCM.
Fixes: 35c790c37bbc ("crypto: amcc - switch to AES library for GCM key derivation") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zhou Wang [Sat, 26 Oct 2019 03:00:16 +0000 (11:00 +0800)]
crypto: hisilicon - fix to return sub-optimal device when best device has no qps
Currently find_zip_device() finds zip device which has the min NUMA
distance with current CPU.
This patch modifies find_zip_device to return sub-optimal device when best
device has no qps. This patch sorts all devices by NUMA distance, then
finds the best zip device which has free qp.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zhou Wang [Sat, 26 Oct 2019 02:57:21 +0000 (10:57 +0800)]
crypto: hisilicon - use sgl API to get sgl dma addr and len
Use sgl API to get sgl dma addr and len, this will help to avoid compile
error in some platforms. So NEED_SG_DMA_LENGTH can be removed here, which
can only be selected by arch code.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 25 Oct 2019 19:41:13 +0000 (12:41 -0700)]
crypto: skcipher - rename the crypto_blkcipher module and kconfig option
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
Eric Biggers [Fri, 25 Oct 2019 19:41:12 +0000 (12:41 -0700)]
crypto: skcipher - remove the "blkcipher" algorithm type
Now that all "blkcipher" algorithms have been converted to "skcipher",
remove the blkcipher algorithm type.
The skcipher (symmetric key cipher) algorithm type was introduced a few
years ago to replace both blkcipher and ablkcipher (synchronous and
asynchronous block cipher). The advantages of skcipher include:
- A much less confusing name, since none of these algorithm types have
ever actually been for raw block ciphers, but rather for all
length-preserving encryption modes including block cipher modes of
operation, stream ciphers, and other length-preserving modes.
- It unified blkcipher and ablkcipher into a single algorithm type
which supports both synchronous and asynchronous implementations.
Note, blkcipher already operated only on scatterlists, so the fact
that skcipher does too isn't a regression in functionality.
- Better type safety by using struct skcipher_alg, struct
crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc.
- It sometimes simplifies the implementations of algorithms.
Also, the blkcipher API was no longer being tested.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 25 Oct 2019 19:41:11 +0000 (12:41 -0700)]
crypto: skcipher - rename crypto_skcipher_type2 to crypto_skcipher_type
Now that the crypto_skcipher_type() function has been removed, there's
no reason to call the crypto_type struct for skciphers
"crypto_skcipher_type2". Rename it to simply "crypto_skcipher_type".
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 25 Oct 2019 19:41:10 +0000 (12:41 -0700)]
crypto: skcipher - remove crypto_has_ablkcipher()
crypto_has_ablkcipher() has no users, and it does the same thing as
crypto_has_skcipher() anyway. So remove it. This also removes the last
user of crypto_skcipher_type() and crypto_skcipher_mask(), so remove
those too.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 25 Oct 2019 19:41:09 +0000 (12:41 -0700)]
crypto: skcipher - unify the crypto_has_skcipher*() functions
crypto_has_skcipher() and crypto_has_skcipher2() do the same thing: they
check for the availability of an algorithm of type skcipher, blkcipher,
or ablkcipher, which also meets any non-type constraints the caller
specified. And they have exactly the same prototype.
Therefore, eliminate the redundancy by removing crypto_has_skcipher()
and renaming crypto_has_skcipher2() to crypto_has_skcipher().
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
David Sterba [Thu, 24 Oct 2019 16:28:32 +0000 (18:28 +0200)]
crypto: testmgr - add test vectors for blake2b
Test vectors for blake2b with various digest sizes. As the algorithm is
the same up to the digest calculation, the key and input data length is
distributed in a way that tests all combinanions of the two over the
digest sizes.
Based on the suggestion from Eric, the following input sizes are tested
[0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the
padded and the non-padded input buffers are tested.
The patch brings support of several BLAKE2 variants (2b with various
digest lengths). The keyed digest is supported, using tfm->setkey call.
The in-tree user will be btrfs (for checksumming), we're going to use
the BLAKE2b-256 variant.
The code is reference implementation taken from the official sources and
modified in terms of kernel coding style (whitespace, comments, uintXX_t
-> uXX types, removed unused prototypes and #ifdefs, removed testing
code, changed secure_zero_memory -> memzero_explicit, used own helpers
for unaligned reads/writes and rotations).
Further changes removed sanity checks of key length or output size,
these values are verified in the crypto API callbacks or hardcoded in
shash_alg and not exposed to users.
Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Colin Ian King [Wed, 23 Oct 2019 11:48:24 +0000 (12:48 +0100)]
crypto: mediatek - remove redundant bitwise-or
Bitwise-or'ing 0xffffffff with the u32 variable ctr is the same result
as assigning the value to ctr. Remove the redundant bitwise-or and
just use an assignment.
Addresses-Coverity: ("Suspicious &= or |= constant expression") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Wed, 23 Oct 2019 09:50:44 +0000 (11:50 +0200)]
crypto: ecdh - fix big endian bug in ECC library
The elliptic curve arithmetic library used by the EC-DH KPP implementation
assumes big endian byte order, and unconditionally reverses the byte
and word order of multi-limb quantities. On big endian systems, the byte
reordering is not necessary, while the word ordering needs to be retained.
So replace the __swab64() invocation with a call to be64_to_cpu() which
should do the right thing for both little and big endian builds.
Andrey Smirnov [Tue, 22 Oct 2019 15:30:13 +0000 (08:30 -0700)]
crypto: caam - populate platform devices last
Move the call to devm_of_platform_populate() at the end of
caam_probe(), so we won't try to add any child devices until all of
the initialization is finished successfully.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Horia Geantă <horia.geanta@nxp.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Iuliana Prodan <iuliana.prodan@nxp.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: inside-secure - Fixed warnings on inconsistent byte order handling
This fixes a bunch of endianness related sparse warnings reported by the
kbuild test robot as well as Ben Dooks.
Credits for the fix to safexcel.c go to Ben Dooks.
Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The problem is that desc->entry may be uninitialized in the
async_trigger_callback path where the descriptor was gotten
from ccp_prep_dma_interrupt which got it from ccp_alloc_dma_desc
which doesn't initialize the desc->entry list head. So, just
initialize the list head to avoid the problem.
Cc: <stable@vger.kernel.org> Reported-by: Sahaj Sarup <sahajsarup@gmail.com> Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: nx - Improve debugfs_create_u{32,64}() handling for atomics
Variables of type atomic{,64}_t can be used fine with
debugfs_create_u{32,64}, when passing a pointer to the embedded counter.
This allows to get rid of the casts, which prevented compiler checks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hook, Gary [Mon, 21 Oct 2019 13:44:44 +0000 (13:44 +0000)]
crypto: ccp - Verify access to device registers before initializing
Check early whether device registers can be accessed. Some BIOSes have
a broken security policy that prevents access to the device registers,
and return values from ioread() can be misinterpreted. If a read of
a feature register returns a -1, we may not be able to access
any device register, so report the problem and suggestion, and return.
For the PSP, the feature register is checked. For the CCP, the queue
register is checked.
Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hook, Gary [Mon, 21 Oct 2019 13:44:37 +0000 (13:44 +0000)]
crypto: ccp - Change a message to reflect status instead of failure
If an AMD BIOS makes zero CCP queues available to the driver, the
device is unavailable and therefore can't be activated. When this
happens, report the status but don't report a (non-existent)
failure. The CCP will be unactivated.
Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shukun Tan [Mon, 21 Oct 2019 07:41:03 +0000 (15:41 +0800)]
crypto: hisilicon - fix endianness verification problem of QM
This patch fixes following sparse warning:
qm.c:345:33: warning: cast removes address space '<asn:2>' of expression
qm.c:359:20: warning: incorrect type in assignment (different base types)
qm.c:359:20: expected restricted __le16 [usertype] w0
qm.c:359:20: got int
qm.c:362:27: warning: incorrect type in assignment (different base types)
qm.c:362:27: expected restricted __le16 [usertype] queue_num
qm.c:362:27: got unsigned short [usertype] queue
qm.c:363:24: warning: incorrect type in assignment (different base types)
qm.c:363:24: expected restricted __le32 [usertype] base_l
qm.c:363:24: got unsigned int [usertype]
qm.c:364:24: warning: incorrect type in assignment (different base types)
qm.c:364:24: expected restricted __le32 [usertype] base_h
qm.c:364:24: got unsigned int [usertype]
qm.c:451:22: warning: restricted __le32 degrades to integer
qm.c:471:24: warning: restricted __le16 degrades to integer
......
qm.c:1617:19: warning: incorrect type in assignment (different base types)
qm.c:1617:19: expected restricted __le32 [usertype] dw6
qm.c:1617:19: got int
qm.c:1891:24: warning: incorrect type in return expression (different base types)
qm.c:1891:24: expected int
qm.c:1891:24: got restricted pci_ers_result_t
qm.c:1894:40: warning: incorrect type in return expression (different base types)
qm.c:1894:40: expected int
qm.c:1894:40: got restricted pci_ers_result_t
Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shukun Tan [Mon, 21 Oct 2019 07:41:02 +0000 (15:41 +0800)]
crypto: hisilicon - fix param should be static when not external.
This patch fixes following sparse warning:
zip_main.c:87:1: warning: symbol 'hisi_zip_list' was not declared.
Should it be static?
zip_main.c:88:1: warning: symbol 'hisi_zip_list_lock' was not declared.
Should it be static?
zip_main.c:948:68: warning: Using plain integer as NULL pointer
Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Shukun Tan [Mon, 21 Oct 2019 07:41:01 +0000 (15:41 +0800)]
crypto: hisilicon - Fix using plain integer as NULL pointer
This patch fix sparse warning:
zip_crypto.c:425:26: warning: Using plain integer as NULL pointer
Replaces assignment of 0 to pointer with NULL assignment.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tian Tao [Sat, 19 Oct 2019 00:41:37 +0000 (08:41 +0800)]
crypto: ccree - fix comparison of unsigned expression warning
This patch fixes the following warnings:
drivers/crypto/ccree/cc_aead.c:630:5-12: WARNING: Unsigned expression
compared with zero: seq_len > 0
Signed-off-by: Tian Tao <tiantao6@huawei.com>
v2:
change hmac_setkey() return type to unsigned int to fix the warning. Acked-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ashish Kalra [Thu, 17 Oct 2019 22:35:11 +0000 (22:35 +0000)]
crypto: ccp - Retry SEV INIT command in case of integrity check failure.
SEV INIT command loads the SEV related persistent data from NVS
and initializes the platform context. The firmware validates the
persistent state. If validation fails, the firmware will reset
the persisent state and return an integrity check failure status.
At this point, a subsequent INIT command should succeed, so retry
the command. The INIT command retry is only done during driver
initialization.
Additional enums along with SEV_RET_SECURE_DATA_INVALID are added
to sev_ret_code to maintain continuity and relevance of enum values.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver uses a couple of buffers that seem to
be __be32 or __be64 fields, but declares them as
u32. This means there are a number of warnings
from sparse due to casting to/from __beXXX.
Fix these by changing the types of the buffer
and the associated variables.
drivers/crypto/atmel-aes.c:1023:15: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1023:15: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1023:15: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1023:15: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1023:15: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1023:15: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1059:28: warning: incorrect type in assignment (different base types)
drivers/crypto/atmel-aes.c:1059:28: expected unsigned int
drivers/crypto/atmel-aes.c:1059:28: got restricted __be32 [usertype]
drivers/crypto/atmel-aes.c:1550:28: warning: incorrect type in assignment (different base types)
drivers/crypto/atmel-aes.c:1550:28: expected unsigned int
drivers/crypto/atmel-aes.c:1550:28: got restricted __be32 [usertype]
drivers/crypto/atmel-aes.c:1561:39: warning: incorrect type in assignment (different base types)
drivers/crypto/atmel-aes.c:1561:39: expected unsigned long long [usertype]
drivers/crypto/atmel-aes.c:1561:39: got restricted __be64 [usertype]
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:17: warning: cast to restricted __be32
drivers/crypto/atmel-aes.c:1599:15: warning: incorrect type in assignment (different base types)
drivers/crypto/atmel-aes.c:1599:15: expected unsigned int [usertype]
drivers/crypto/atmel-aes.c:1599:15: got restricted __be32 [usertype]
drivers/crypto/atmel-aes.c:1692:17: warning: incorrect type in assignment (different base types)
drivers/crypto/atmel-aes.c:1692:17: expected unsigned long long [usertype]
drivers/crypto/atmel-aes.c:1692:17: got restricted __be64 [usertype]
drivers/crypto/atmel-aes.c:1693:17: warning: incorrect type in assignment (different base types)
drivers/crypto/atmel-aes.c:1693:17: expected unsigned long long [usertype]
drivers/crypto/atmel-aes.c:1693:17: got restricted __be64 [usertype]
drivers/crypto/atmel-aes.c:1888:63: warning: incorrect type in initializer (different base types)
drivers/crypto/atmel-aes.c:1888:63: expected unsigned int
drivers/crypto/atmel-aes.c:1888:63: got restricted __le32 [usertype]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Tue, 15 Oct 2019 08:14:12 +0000 (10:14 +0200)]
crypto: powerpc/spe-xts - implement support for ciphertext stealing
Add the logic to deal with input sizes that are not a round multiple
of the AES block size, as described by the XTS spec. This brings the
SPE implementation in line with other kernel drivers that have been
updated recently to take this into account.
Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Tue, 15 Oct 2019 02:45:17 +0000 (19:45 -0700)]
crypto: powerpc - convert SPE AES algorithms to skcipher API
Convert the glue code for the PowerPC SPE implementations of AES-ECB,
AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the
"skcipher" API. This is needed in order for the blkcipher API to be
removed.
Tested with:
export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
make mpc85xx_defconfig
cat >> .config << EOF
# CONFIG_MODULES is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_AES_PPC_SPE=y
EOF
make olddefconfig
make -j32
qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
-kernel arch/powerpc/boot/zImage \
-append cryptomgr.fuzz_iterations=1000
Note that xts-ppc-spe still fails the comparison tests due to the lack
of ciphertext stealing support. This is not addressed by this patch.
This patch also cleans up the code by making ->encrypt() and ->decrypt()
call a common function for each of ECB, CBC, and XTS, and by using a
clearer way to compute the length to process at each step.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Tue, 15 Oct 2019 02:45:15 +0000 (19:45 -0700)]
crypto: powerpc - don't unnecessarily use atomic scatterwalk
The PowerPC SPE implementations of AES modes only disable preemption
during the actual encryption/decryption, not during the scatterwalk
functions. It's therefore unnecessary to request an atomic scatterwalk.
So don't do so.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Mon, 14 Oct 2019 16:16:45 +0000 (18:16 +0200)]
crypto: aegis128 - duplicate init() and final() hooks in SIMD code
In order to speed up aegis128 processing even more, duplicate the init()
and final() routines as SIMD versions in their entirety. This results
in a 2x speedup on ARM Cortex-A57 for ~1500 byte packets (using AES
instructions).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Mon, 14 Oct 2019 16:16:44 +0000 (18:16 +0200)]
crypto: aegis128 - avoid function pointers for parameterization
Instead of passing around an ops structure with function pointers,
which forces indirect calls to be used, refactor the code slightly
so we can use ordinary function calls. At the same time, switch to
a static key to decide whether or not the SIMD code path may be used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sumit Garg [Mon, 14 Oct 2019 12:02:45 +0000 (17:32 +0530)]
hwrng: omap - Fix RNG wait loop timeout
Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG
data rate which takes approx. 700us to produce 16 bytes of output data
as per testing results. So configure the timeout as 1000us to also take
account of lack of udelay()'s reliability.
Fixes: d3c2e883a251 ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K") Cc: <stable@vger.kernel.org> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: inside-secure - Made locally used safexcel_pci_remove() static
safexcel_pci_remove() is only used locally in the module and not exported,
so added a static function specifier.
This fixes a sparse issue reported by Ben Dooks.
Fixes: d3e4f7f8fd28 ("crypto: inside-secure - add support for...") Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Laurent Vivier [Mon, 14 Oct 2019 11:46:32 +0000 (13:46 +0200)]
hwrng: core - Fix use-after-free warning in hwrng_register()
Commit 74f6bc58df8d has moved add_early_randomness() out of the
rng_mutex and tries to protect the reference of the new rng device
by incrementing the reference counter.
But in hwrng_register(), the function can be called with a new device
that is not set as the current_rng device and the reference has not been
initialized. This patch fixes the problem by not using the reference
counter when the device is not the current one: the reference counter
is only meaningful in the case of the current rng device and a device
is not used if it is not the current one (except in hwrng_register())
The problem has been reported by Marek Szyprowski on ARM 32bit
Exynos5420-based Chromebook Peach-Pit board:
WARNING: CPU: 3 PID: 1 at lib/refcount.c:156 hwrng_register+0x13c/0x1b4
refcount_t: increment on 0; use-after-free.
Modules linked in:
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00061-gdaae28debcb0
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01124c8>] (unwind_backtrace) from [<c010dfb8>] (show_stack+0x10/0x14)
[<c010dfb8>] (show_stack) from [<c0ae86d8>] (dump_stack+0xa8/0xd4)
[<c0ae86d8>] (dump_stack) from [<c0127428>] (__warn+0xf4/0x10c)
[<c0127428>] (__warn) from [<c01274b4>] (warn_slowpath_fmt+0x74/0xb8)
[<c01274b4>] (warn_slowpath_fmt) from [<c054729c>] (hwrng_register+0x13c/0x1b4)
[<c054729c>] (hwrng_register) from [<c0547e54>] (tpm_chip_register+0xc4/0x274)
...
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 74f6bc58df8d ("hwrng: core - move add_early_randomness() out of rng_mutex") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sun, 13 Oct 2019 04:39:18 +0000 (21:39 -0700)]
crypto: nx - convert AES-CTR to skcipher API
Convert the PowerPC Nest (NX) implementation of AES-CTR from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sun, 13 Oct 2019 04:39:17 +0000 (21:39 -0700)]
crypto: nx - convert AES-CBC to skcipher API
Convert the PowerPC Nest (NX) implementation of AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sun, 13 Oct 2019 04:39:16 +0000 (21:39 -0700)]
crypto: nx - convert AES-ECB to skcipher API
Convert the PowerPC Nest (NX) implementation of AES-ECB from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sun, 13 Oct 2019 04:39:15 +0000 (21:39 -0700)]
crypto: nx - don't abuse blkcipher_desc to pass iv around
The NX crypto driver is using 'struct blkcipher_desc' to pass the IV
around, even for AEADs (for which it creates the struct on the stack).
This is not appropriate since this structure is part of the "blkcipher"
API, which is deprecated and will be removed.
Just pass around the IV directly instead.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sun, 13 Oct 2019 04:17:41 +0000 (21:17 -0700)]
crypto: padlock-aes - convert to skcipher API
Convert the VIA PadLock implementations of AES-ECB and AES-CBC from the
deprecated "blkcipher" API to the "skcipher" API. This is needed in
order for the blkcipher API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sat, 12 Oct 2019 20:18:09 +0000 (13:18 -0700)]
crypto: s390/des - convert to skcipher API
Convert the glue code for the S390 CPACF implementations of DES-ECB,
DES-CBC, DES-CTR, 3DES-ECB, 3DES-CBC, and 3DES-CTR from the deprecated
"blkcipher" API to the "skcipher" API. This is needed in order for the
blkcipher API to be removed.
Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sat, 12 Oct 2019 20:18:08 +0000 (13:18 -0700)]
crypto: s390/paes - convert to skcipher API
Convert the glue code for the S390 CPACF protected key implementations
of AES-ECB, AES-CBC, AES-XTS, and AES-CTR from the deprecated
"blkcipher" API to the "skcipher" API. This is needed in order for the
blkcipher API to be removed.
Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com>
reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sat, 12 Oct 2019 20:18:07 +0000 (13:18 -0700)]
crypto: s390/aes - convert to skcipher API
Convert the glue code for the S390 CPACF implementations of AES-ECB,
AES-CBC, AES-XTS, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API. This is needed in order for the blkcipher API to be
removed.
Note: I made CTR use the same function for encryption and decryption,
since CTR encryption and decryption are identical.
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sat, 12 Oct 2019 04:38:50 +0000 (21:38 -0700)]
crypto: sparc/des - convert to skcipher API
Convert the glue code for the SPARC64 DES opcodes implementations of
DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher"
API to the "skcipher" API. This is needed in order for the blkcipher
API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sat, 12 Oct 2019 04:38:49 +0000 (21:38 -0700)]
crypto: sparc/camellia - convert to skcipher API
Convert the glue code for the SPARC64 Camellia opcodes implementations
of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to
the "skcipher" API. This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Sat, 12 Oct 2019 04:38:48 +0000 (21:38 -0700)]
crypto: sparc/aes - convert to skcipher API
Convert the glue code for the SPARC64 AES opcodes implementations of
AES-ECB, AES-CBC, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API. This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Yunfeng Ye [Fri, 11 Oct 2019 12:44:53 +0000 (20:44 +0800)]
crypto: chtls - remove the redundant check in chtls_recvmsg()
A warning message reported by a static analysis tool:
"
Either the condition 'if(skb)' is redundant or there is possible null
pointer dereference: skb.
"
Remove the unused redundant check.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
zhengbin [Fri, 11 Oct 2019 10:08:02 +0000 (18:08 +0800)]
crypto: ux500 - Remove set but not used variable 'cookie'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/ux500/hash/hash_core.c: In function hash_set_dma_transfer:
drivers/crypto/ux500/hash/hash_core.c:143:15: warning: variable cookie set but not used [-Wunused-but-set-variable]
It is not used since commit d729fd07073f ("crypto:
ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel [Fri, 11 Oct 2019 09:08:00 +0000 (11:08 +0200)]
crypto: arm - use Kconfig based compiler checks for crypto opcodes
Instead of allowing the Crypto Extensions algorithms to be selected when
using a toolchain that does not support them, and complain about it at
build time, use the information we have about the compiler to prevent
them from being selected in the first place. Users that are stuck with
a GCC version <4.8 are unlikely to care about these routines anyway, and
it cleans up the Makefile considerably.
While at it, add explicit 'armv8-a' CPU specifiers to the code that uses
the 'crypto-neon-fp-armv8' FPU specifier so we don't regress Clang, which
will complain about this in version 10 and later.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers [Fri, 11 Oct 2019 04:51:32 +0000 (21:51 -0700)]
crypto: geode-aes - convert to skcipher API and make thread-safe
The geode AES driver is heavily broken because it stores per-request
state in the transform context. So it will crash or produce the wrong
result if used by any of the many places in the kernel that issue
concurrent requests for the same transform object.
This driver is also implemented using the deprecated blkcipher API,
which makes it difficult to fix, and puts it among the drivers
preventing that API from being removed.
Convert this driver to use the skcipher API, and change it to not store
per-request state in the transform context.
Fixes: f653aee52bae ("[PATCH] crypto: Add support for the Geode LX AES hardware") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ben Dooks [Wed, 9 Oct 2019 09:12:56 +0000 (10:12 +0100)]
crypto: jitter - add header to fix buildwarnings
Fix the following build warnings by adding a header for
the definitions shared between jitterentropy.c and
jitterentropy-kcapi.c. Fixes the following:
crypto/jitterentropy.c:445:5: warning: symbol 'jent_read_entropy' was not declared. Should it be static?
crypto/jitterentropy.c:475:18: warning: symbol 'jent_entropy_collector_alloc' was not declared. Should it be static?
crypto/jitterentropy.c:509:6: warning: symbol 'jent_entropy_collector_free' was not declared. Should it be static?
crypto/jitterentropy.c:516:5: warning: symbol 'jent_entropy_init' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:59:6: warning: symbol 'jent_zalloc' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:64:6: warning: symbol 'jent_zfree' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:69:5: warning: symbol 'jent_fips_enabled' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:74:6: warning: symbol 'jent_panic' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:79:6: warning: symbol 'jent_memcpy' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:93:6: warning: symbol 'jent_get_nstime' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Stephan Mueller <smueller@chronox.de Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it. Add in missing
newline.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
projects / kernel.git / log