In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
partition. Add a driver for reading from and writing to the metadata
when the updatable images and the metadata are stored on a block
device which is formatted with GPT based partition scheme.
Sughosh Ganu [Fri, 21 Oct 2022 12:45:55 +0000 (18:15 +0530)]
FWU: Add FWU metadata structure and driver for accessing metadata
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, which is stored on
a dedicated partition. Add the metadata structure, and a driver model
uclass which provides functions to access the metadata. These are
generic API's, and implementations can be added based on parameters
like how the metadata partition is accessed and what type of storage
device houses the metadata.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Sughosh Ganu [Fri, 21 Oct 2022 12:45:54 +0000 (18:15 +0530)]
dt/bindings: Add bindings for GPT based FWU Metadata storage device
Add bindings needed for accessing the FWU metadata partitions. These
include the compatible string which point to the access method and the
actual device which stores the FWU metadata.
The current patch adds basic bindings needed for accessing the
metadata structure on GPT partitioned block devices.
To quote Simon:
This series provides an implementation of VBE from TPL through to U-Boot
proper, using VBE to load the relevant firmware stages. It buils a single
image.bin file containing all the phases:
TPL - initial phase, loads VPL using binman symbols
VPL - main firmware phase, loads SPL using VBE parameters
SPL - loads U-Boot proper using VBE parameters
U-Boot - final firmware phase, where OS booting is processed
This series does not include the OS-booting phase. That will be the
subject of a future series.
The implementation is entirely handled by sandbox. It should be possible
to enable this on a real board without much effort, but that is also the
subject of a future series.
Simon Glass [Fri, 21 Oct 2022 00:23:15 +0000 (18:23 -0600)]
sandbox: Add an image for VPL
Use binman to build an image which includes all the U-Boot phases so that
a full VBE boot can take place with just that image.bin file. Attach the
image file to mmc2 so it can be loaded.
VBE is used to load images in two phases:
- In VPL, VBE decides which SPL image to load
- In SPL, VBE decides which U-Boot image to load
The latter should really be determined by VPL, since it does the full
signature verification on the selected configuration. However, we have
separate configurations for SPL and U-Boot proper, so for now we keep it
simple and have SPL do its own verification. This will need to be
tidied up later.
Simon Glass [Fri, 21 Oct 2022 00:23:14 +0000 (18:23 -0600)]
vbe: Add info about the VBE device to the fwupd node
At present we put the driver in the /chosen node in U-Boot. This is a bit
strange, since U-Boot doesn't normally use that node itself. It is better
to put it under the bootstd node.
To make this work we need to copy create the node under /chosen when
fixing up the device tree. Copy over all the properties so that fwupd
knows what to do.
Simon Glass [Fri, 21 Oct 2022 00:23:13 +0000 (18:23 -0600)]
vbe: Add Kconfig options for VPL
Enable the various features needed in VPL, by adding Kconfig options.
Update the defconfig for sandbox_vpl so that the build for each phase
includes what is needed. Drop LZMA for now and make sure partition support
is omitted in SPL, since it is not needed.
Simon Glass [Fri, 21 Oct 2022 00:23:12 +0000 (18:23 -0600)]
vbe: Drop the U-Boot prefix from the version
We don't need the U-Boot prefix on the version and in fact it is harmful
since pytest gets confused seeing the U-Boot banner bring displayed when
the version is printed.
Drop the prefix from the string.
We could produce an entirely new string from the component parts, but this
adds to the rodata size and would break the use of version_string as the
only thing which holds this information.
Simon Glass [Fri, 21 Oct 2022 00:23:09 +0000 (18:23 -0600)]
vbe: Support selecting operations by SPL phase
VBE supports booting firmware during the SPL phases, i.e. so that VPL can
start SPL and SPL can start U-Boot.
It also supports booting an OS, when in U-Boot.
As a first step towards these features, add functions to indicate the
current VBE phase. The firmware selection is done in VPL and the OS
selection is done in U-Boot proper.
Simon Glass [Fri, 21 Oct 2022 00:23:07 +0000 (18:23 -0600)]
spl: Allow multiple loaders of the same time
At present we only support a single loader of each time. Extra ones are
ignored. This means that only one BOOT_DEVICE_BOARD can be used in the SPL
image.
This is inconvenient since we sometimes want to provide several
board-specific drivers, albeit at different priorties. Add support for
this.
This should have no functional change for existing boards.
Simon Glass [Fri, 21 Oct 2022 00:23:04 +0000 (18:23 -0600)]
image: Allow loading a FIT image for a particular phase
Add support for filtering out FIT images by phase. Rather than adding yet
another argument to this already overloaded function, use a composite
value, where the phase is only added in if needed.
The FIT config is still selected (and verified) as normal, but the images
are selected based on the phase.
Tests for this come in a little later, as part of the updated VPL test.
Simon Glass [Fri, 21 Oct 2022 00:23:02 +0000 (18:23 -0600)]
sandbox: Add a way to specify the sandbox executable
At present the sandbox executable is assumed to be arg[0] but this only
works for a single jump (e.g. from SPL to U-Boot). Add a new arg to solve
this issue, along with a detailed comment.
Simon Glass [Fri, 21 Oct 2022 00:23:01 +0000 (18:23 -0600)]
sandbox: Generalise SPL booting
At present sandbox only supports jumping to a file, to get to the next
U-Boot phase. We want to support other methods, so update the code to
use an enum for the method. Also use the
Use board_boot_order() to set the order, so we can add more options.
Also add the MMC methods into the BOOT_DEVICE enum so that booting
from MMC can be supported.
Simon Glass [Fri, 21 Oct 2022 00:22:57 +0000 (18:22 -0600)]
dm: blk: mmc: Tidy up some Makefile rules for SPL
Use the correct SPL_TPL_ variable so that these features can be enabled in
TPL and VPL as needed.
Disable it by default in TPL to avoid any code-size increase. No boards
are actually using it since the Makefile rules don't allow including
drivers/block/ with TPL_DM enabled. It can be manually enabled as needed.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Simon Glass [Fri, 21 Oct 2022 00:22:54 +0000 (18:22 -0600)]
dm: blk: Add udevice functions
At present we have functions called blk_dread(), etc., which take a
struct blk_desc * to refer to the block device. Add some functions which
use udevice instead, since this is more in keeping with how driver model
is supposed to work.
Update one of the tests to use this.
Note that it would be nice to update the functions in disk-uclass.c to use
these new functions. However they are not quite the same. For example,
disk_blk_read() adds the partition offset to 'start' when calling the
cache read/fill functions, but does not with part_blk_read(), which does
the addition itself. So as designed the code is duplicated.
Simon Glass [Fri, 21 Oct 2022 00:22:53 +0000 (18:22 -0600)]
disk: Rename block_dev to desc
The use of 'block_dev' in this context is confusing, since it is not a
pointer to a device, just to some information about it. Rename this to
'desc', as is more commonly used, since it is a block descriptor.
Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glplk@gmx.de>
Simon Glass [Fri, 21 Oct 2022 00:22:50 +0000 (18:22 -0600)]
test: Support tests which can only be run manually
At present we normally write tests either in Python or in C. But most
Python tests end up doing a lot of checks which would be better done in C.
Checks done in C are orders of magnitude faster and it is possible to get
full access to U-Boot's internal workings, rather than just relying on
the command line.
The model is to have a Python test set up some things and then use C code
(in a unit test) to check that they were done correctly. But we don't want
those checks to happen as part of normal test running, since each C unit
tests is dependent on the associate Python tests, so cannot run without
it.
To acheive this, add a new UT_TESTF_MANUAL flag to use with the C 'check'
tests, so that they can be skipped by default when the 'ut' command is
used. Require that tests have a name ending with '_norun', so that pytest
knows to skip them.
Simon Glass [Fri, 21 Oct 2022 00:22:49 +0000 (18:22 -0600)]
test: Update tests to use the skip feature
Some tests currently return 0 when they want to be skipped. Update them to
return -EAGAIN instead, so they are counted as skipped.
A few tests are in two parts, with the latter part being skipped in
certain situations. Split these into two and use the correct condition for
the second part.
Simon Glass [Fri, 21 Oct 2022 00:22:48 +0000 (18:22 -0600)]
test: Report skippped tests
At present it is possible for a test to skip itself by returning -EAGAIN
but this is not recorded. An existing example is in test_pre_run() with
the "Console recording disabled" check.
Keep a track of skipped tests and report the total at the end.
Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Fri, 21 Oct 2022 00:22:46 +0000 (18:22 -0600)]
binman: Handle writing ELF symbols in the Entry class
This feature is used by several etypes and we plan to add more that use
it. Make symbol writing a feature of the base class to reduce the code
duplication.
Simon Glass [Fri, 21 Oct 2022 00:22:43 +0000 (18:22 -0600)]
spl: Add a separate silence option for SPL
Add an option to allow silent console to be controlled separately in SPL,
so that boot progress can be shown. Disable it by default for sandbox
since it is useful to see what is going on there.
Simon Glass [Fri, 21 Oct 2022 00:22:42 +0000 (18:22 -0600)]
spl: Refactor controls for console output
The expression in boot_from_devices() is fairly long and appears to be an
artefact from before we could easily call printf(...) and have the call be
nop'd out. So update it to just check CONFIG_SILENT_CONSOLE.
Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com>
Simon Glass [Fri, 21 Oct 2022 00:22:41 +0000 (18:22 -0600)]
spl: Use binman suffix allow symbols of any SPL etype
At present we use symbols for the u-boot-spl entry, but this is not always
what we want. For example, sandbox actually jumps to a u-boot-spl-elf
entry, since sandbox executables are ELF files.
We already handle this with U-Boot by using the '-any' suffix. Add it for
SPL as well.
Simon Glass [Fri, 21 Oct 2022 00:22:40 +0000 (18:22 -0600)]
disk: Drop debug messages in part_efi
This is monstrously verbose when something goes wrong. It should work by
recording the problem and reporting it (once) at the command level. At
present it sometimes outputs hundreds of lines of CRC mismatches.
William Zhang [Wed, 24 Aug 2022 04:44:32 +0000 (21:44 -0700)]
timer: sti: convert sti-timer to arm a9 global timer
STI timer is actually ARM Cortex A9 global timer. Convert the driver to
use generic global timer name and make it consistent with Linux kernel
global timer driver. This also allows any A9 based device to use this
driver.
William Zhang [Mon, 22 Aug 2022 18:49:07 +0000 (11:49 -0700)]
arm: bcmbca: remove bcm6753 support under CONFIG_ARCH_BCM6753
BCM6753 is essentially same as the main chip BCM6855 but with different
SKU number. Now that BCM6855 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM6855, remove the original ARCH_BCM6753 support and migrate its
configuration and dts settings. This includes:
- Remove the bcm96753ref board folder. It is replaced by the
generic bcmbca board folder.
- Merge the 6753.dtsi setting to the new 6855.dtsi file. Update
96753ref board dts with the new compatible string.
- Delete broadcom_bcm96763ref.h and merge its setting to the new
bcm96855.h file.
- Delete bcm96753ref_ram_defconfig and use a basic config version of
bcm96855_defconfig
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:49:06 +0000 (11:49 -0700)]
arm: bcmbca: add bcm6855 SoC support under CONFIG_ARCH_BCMBCA
BCM6855 is a Broadcom ARM A7 based PON Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
broadband SoC, this patch adds it under CONFIG_BCM6855 chip config and
CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL101 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:39:44 +0000 (11:39 -0700)]
arm: bcmbca: remove bcm6858 support under CONFIG_ARCH_BCM6858
Now that BCM6858 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM6858, remove the original ARCH_BCM6858 support and migrate its
configuration and dts settings. This includes:
- Remove the bcm968580xref board folder. It is replaced by the generic
bcmbca board folder.
- Update bcm968580xref board dts with the new compatible string.
- Delete broadcom_bcm968580xref.h and merge its setting to the new
bcm96858.h file.
- Remove bcm968580xref_ram_defconfig as a basic config version of
bcm96858_defconfig is now added.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:39:43 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other broadband
SoC, this patch adds it under CONFIG_BCM6858 chip config and
CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and the
original dts is updated with the one from linux next git repository.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:31:42 +0000 (11:31 -0700)]
arm: bcmbca: remove bcm68360 support under CONFIG_ARCH_BCM68360
BCM68360 is a variant within the BCM6856 chip family. Now that BCM6856
is supported under CONFIG_ARCH_BCMBCA and CONFIG_BCM6856, remove the
original ARCH_BCM68360 support and migrate its configuration and dts
settings. This includes:
- Remove the bcm968360bg board folder. It is replaced by the generic
bcmbca board folder.
- Merge the 68360.dtsi setting to the new 6856.dtsi file. Update board
dts with the new compatible string.
- Merge broadcom_bcm968360bg.h setting to the new bcm96856.h file.
- Remove bcm968360bg_ram_defconfig as a basic config version of
bcm96856_defconfig is now added.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:31:41 +0000 (11:31 -0700)]
arm: bcmbca: add bcm6856 SoC support under CONFIG_ARCH_BCMBCA
BCM6856 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other Broadband
SoC, this patch adds it under CONFIG_BCM6856 chip config and
CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and Broadcom uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:19:48 +0000 (11:19 -0700)]
arm: bcmbca: make reset_cpu function weak
BCM63158 carries the CONFIG_SYSRESET from the original configuration. It
provide reset_cpu function already so need to define weak version of the
dummy reset_cpu for other BCMBCA SoCs to avoid linking error.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:19:45 +0000 (11:19 -0700)]
arm: bcmbca: remove bcm63158 support under CONFIG_ARCH_BCM63158
Now that BCM63158 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM63158, remove the original ARCH_BCM63158 support and migrate
configuration settings.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:19:44 +0000 (11:19 -0700)]
arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
Broadband SoC, this patch adds it under CONFIG_BCM63158 chip
config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Sat, 6 Aug 2022 01:34:03 +0000 (18:34 -0700)]
arm: bcmbca: add bcm4908 SoC support
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added
under ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux git repository so the dts and dtsi
files are stripped down version of linux copies with mininum blocks
needed by u-boot.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:34:02 +0000 (18:34 -0700)]
arm: bcmbca: add bcm6813 SoC support
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part
of the BCA (Broadband Carrier Access origin) chipset family so it's
added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:34:01 +0000 (18:34 -0700)]
arm: bcmbca: add bcm4912 SoC support
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts
and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:34:00 +0000 (18:34 -0700)]
arm: bcmbca: add bcm63146 SoC support
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:25:13 +0000 (18:25 -0700)]
arm: bcmbca: add bcm63138 SoC support
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory, ARM A9 global timer
and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are stripped down version of linux copies with mininum blocks
needed by u-boot.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
This patch applies on top of the my previous patch [1].
William Zhang [Mon, 1 Aug 2022 18:39:25 +0000 (11:39 -0700)]
arm: bcmbca: add bcm63148 SoC support
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:24 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6756 SoC support
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC.
It is part of the BCA(Broadband Carrier Access origin) chipset family so
it's added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:23 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6878 SoC support
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011
uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:22 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6846 SoC support
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:21 +0000 (11:39 -0700)]
arm: bcmbca: add bcm63178 SoC support
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Tom Rini [Sun, 30 Oct 2022 21:16:35 +0000 (17:16 -0400)]
Merge tag 'video-20221030' of https://source.denx.de/u-boot/custodians/u-boot-video
- fix [hv]sync active vs back porch in dw_mipi_dsi
- simplefb rotation support
- support splash as raw image from MMC
- enhancements to Truetype console (multiple fonts and sizes)
- drop old LCD support
projects / uboot.git / log