Jason Wang [Fri, 23 Dec 2016 14:37:30 +0000 (22:37 +0800)]
virtio-net: forbid XDP when VIRTIO_NET_F_GUEST_UFO is support
When VIRTIO_NET_F_GUEST_UFO is negotiated, host could still send UFO
packet that exceeds a single page which could not be handled
correctly by XDP. So this patch forbids setting XDP when GUEST_UFO is
supported. While at it, forbid XDP for ECN (which comes only from GRO)
too to prevent user from misconfiguration.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 23 Dec 2016 14:37:29 +0000 (22:37 +0800)]
virtio-net: make rx buf size estimation works for XDP
We don't update ewma rx buf size in the case of XDP. This will lead
underestimation of rx buf size which causes host to produce more than
one buffers. This will greatly increase the possibility of XDP page
linearization.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 23 Dec 2016 14:37:28 +0000 (22:37 +0800)]
virtio-net: unbreak csumed packets for XDP_PASS
We drop csumed packet when do XDP for packets. This breaks
XDP_PASS when GUEST_CSUM is supported. Fix this by allowing csum flag
to be set. With this patch, simple TCP works for XDP_PASS.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 23 Dec 2016 14:37:27 +0000 (22:37 +0800)]
virtio-net: correctly handle XDP_PASS for linearized packets
When XDP_PASS were determined for linearized packets, we try to get
new buffers in the virtqueue and build skbs from them. This is wrong,
we should create skbs based on existed buffers instead. Fixing them by
creating skb based on xdp_page.
With this patch "ping 192.168.100.4 -s 3900 -M do" works for XDP_PASS.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 23 Dec 2016 14:37:26 +0000 (22:37 +0800)]
virtio-net: fix page miscount during XDP linearizing
We don't put page during linearizing, the would cause leaking when
xmit through XDP_TX or the packet exceeds PAGE_SIZE. Fix them by
put page accordingly. Also decrease the number of buffers during
linearizing to make sure caller can free buffers correctly when packet
exceeds PAGE_SIZE. With this patch, we won't get OOM after linearize
huge number of packets.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 23 Dec 2016 14:37:25 +0000 (22:37 +0800)]
virtio-net: correctly xmit linearized page on XDP_TX
After we linearize page, we should xmit this page instead of the page
of first buffer which may lead unexpected result. With this patch, we
can see correct packet during XDP_TX.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Fri, 23 Dec 2016 14:37:24 +0000 (22:37 +0800)]
virtio-net: remove the warning before XDP linearizing
Since we use EWMA to estimate the size of rx buffer. When rx buffer
size is underestimated, it's usual to have a packet with more than one
buffers. Consider this is not a bug, remove the warning and correct
the comment before XDP linearizing.
Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 23 Dec 2016 08:32:50 +0000 (09:32 +0100)]
mlxsw: spectrum_router: Correctly remove nexthop groups
At the end of the nexthop initialization process we determine whether
the nexthop should be offloaded or not based on the NUD state of the
neighbour representing it. After all the nexthops were initialized we
refresh the nexthop group and potentially offload it to the device, in
case some of the nexthops were resolved.
Make the destruction of a nexthop group symmetric with its creation by
marking all nexthops as invalid and then refresh the nexthop group to
make sure it was removed from the device's tables.
Fixes: 6b22ed52e069 ("mlxsw: spectrum_router: Add the nexthop neigh activity update") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 23 Dec 2016 08:32:49 +0000 (09:32 +0100)]
mlxsw: spectrum_router: Don't reflect dead neighs
When a neighbour is considered to be dead, we should remove it from the
device's table regardless of its NUD state.
Without this patch, after setting a port to be administratively down we
get the following errors when we periodically try to update the kernel
about neighbours activity:
[ 461.947268] mlxsw_spectrum 0000:03:00.0 sw1p3: Failed to find
matching neighbour for IP=192.168.100.2
Fixes: 5578e9b6f8b5 ("mlxsw: spectrum_router: Offload neighbours based on NUD state change") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 23 Dec 2016 08:32:48 +0000 (09:32 +0100)]
neigh: Send netevent after marking neigh as dead
neigh_cleanup_and_release() is always called after marking a neighbour
as dead, but it only notifies user space and not in-kernel listeners of
the netevent notification chain.
This can cause multiple problems. In my specific use case, it causes the
listener (a switch driver capable of L3 offloads) to believe a neighbour
entry is still valid, and is thus erroneously kept in the device's
table.
Fix that by sending a netevent after marking the neighbour as dead.
Fixes: 5578e9b6f8b5 ("mlxsw: spectrum_router: Offload neighbours based on NUD state change") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 22 Dec 2016 23:19:16 +0000 (18:19 -0500)]
inet: fix IP(V6)_RECVORIGDSTADDR for udp sockets
Socket cmsg IP(V6)_RECVORIGDSTADDR checks that port range lies within
the packet. For sockets that have transport headers pulled, transport
offset can be negative. Use signed comparison to avoid overflow.
Fixes: f1b0743d94dc ("udp: remove headers from UDP packets before queueing") Reported-by: Nisar Jagabar <njagabar@cloudmark.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 22 Dec 2016 12:28:15 +0000 (14:28 +0200)]
net/sched: cls_flower: Mandate mask when matching on flags
When matching on flags, we should require the user to provide the
mask and avoid using an all-ones mask. Not doing so causes matching
on flags provided w.o mask to hit on the value being unset for all
flags, which may not what the user wanted to happen.
Fixes: 5158552c710d ('net/sched: cls_flower: Add support for matching on flags') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Paul Blakey <paulb@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Thu, 22 Dec 2016 12:28:14 +0000 (14:28 +0200)]
net/sched: act_tunnel_key: Fix setting UDP dst port in metadata under IPv6
The UDP dst port was provided to the helper function which sets the
IPv6 IP tunnel meta-data under a wrong param order, fix that.
Fixes: 409369e92d0b ('net/sched: act_tunnel_key: Add UDP dst port option') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jpinto [Fri, 23 Dec 2016 10:15:59 +0000 (10:15 +0000)]
stmmac: CSR clock configuration fix
When testing stmmac with my QoS reference design I checked a problem in the
CSR clock configuration that was impossibilitating the phy discovery, since
every read operation returned 0x0000ffff. This patch fixes the issue.
Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Colitti [Thu, 22 Dec 2016 15:33:57 +0000 (00:33 +0900)]
net: ipv4: Don't crash if passing a null sk to ip_do_redirect.
Commit eccfba369abb ("net: inet: Support UID-based routing in IP
protocols.") made ip_do_redirect call sock_net(sk) to determine
the network namespace of the passed-in socket. This crashes if sk
is NULL.
Fix this by getting the network namespace from the skb instead.
Fixes: eccfba369abb ("net: inet: Support UID-based routing in IP protocols.") Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 21 Dec 2016 13:42:43 +0000 (05:42 -0800)]
tcp: add a missing barrier in tcp_tasklet_func()
Madalin reported crashes happening in tcp_tasklet_func() on powerpc64
Before TSQ_QUEUED bit is cleared, we must ensure the changes done
by list_del(&tp->tsq_node); are committed to memory, otherwise
corruption might happen, as an other cpu could catch TSQ_QUEUED
clearance too soon.
We can notice that old kernels were immune to this bug, because
TSQ_QUEUED was cleared after a bh_lock_sock(sk)/bh_unlock_sock(sk)
section, but they could have missed a kick to write additional bytes,
when NIC interrupts for a given flow are spread to multiple cpus.
Affected TCP flows would need an incoming ACK or RTO timer to add more
packets to the pipe. So overall situation should be better now.
Fixes: 6ea5c3f1fe9e ("tcp: tsq: add shortcut in tcp_tasklet_func()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Madalin Bucur <madalin.bucur@nxp.com> Tested-by: Madalin Bucur <madalin.bucur@nxp.com> Tested-by: Xing Lei <xing.lei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Wed, 21 Dec 2016 10:28:49 +0000 (11:28 +0100)]
net: mvpp2: fix dma unmapping of TX buffers for fragments
Since commit d5b4c21a18912 ("net: mvpp2: enable proper per-CPU TX
buffers unmapping"), we are not correctly DMA unmapping TX buffers for
fragments.
Indeed, the mvpp2_txq_inc_put() function only stores in the
txq_cpu->tx_buffs[] array the physical address of the buffer to be
DMA-unmapped when skb != NULL. In addition, when DMA-unmapping, we use
skb_headlen(skb) to get the size to be unmapped. Both of this works fine
for TX descriptors that are associated directly to a SKB, but not the
ones that are used for fragments, with a NULL pointer as skb:
- We have a NULL physical address when calling DMA unmap
- skb_headlen(skb) crashes because skb is NULL
This causes random crashes when fragments are used.
To solve this problem, we need to:
- Store the physical address of the buffer to be unmapped
unconditionally, regardless of whether it is tied to a SKB or not.
- Store the length of the buffer to be unmapped, which requires a new
field.
Instead of adding a third array to store the length of the buffer to be
unmapped, and as suggested by David Miller, this commit refactors the
tx_buffs[] and tx_skb[] arrays of 'struct mvpp2_txq_pcpu' into a
separate structure 'mvpp2_txq_pcpu_buf', to which a 'size' field is
added. Therefore, instead of having three arrays to allocate/free, we
have a single one, which also improve data locality, reducing the
impact on the CPU cache.
Fixes: d5b4c21a18912 ("net: mvpp2: enable proper per-CPU TX buffers unmapping") Reported-by: Raphael G <raphael.glon@corp.ovh.com> Cc: Raphael G <raphael.glon@corp.ovh.com> Cc: stable@vger.kernel.org Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiko Stübner [Tue, 20 Dec 2016 16:17:06 +0000 (17:17 +0100)]
net: ethernet: stmmac: dwmac-rk: make clk enablement first in powerup
Right now the dwmac-rk tries to set up the GRF-specific speed and link
options before enabling clocks, phys etc and on previous socs this works
because the GRF is supplied on the whole by one clock.
On the rk3399 however the GRF (General Register Files) clock-supply
has been split into multiple clocks and while there is no specific
grf-gmac clock like for other sub-blocks, it seems the mac-specific
portions are actually supplied by the general mac clock.
This results in hangs on rk3399 boards if the driver is build as module.
When built in te problem of course doesn't surface, as the clocks
are of course still on at the stage before clock_disable_unused.
To solve this, simply move the clock enablement to the first position
in the powerup callback. This is also a good idea in general to
enable clocks before everything else.
Tested on rk3288, rk3368 and rk3399 the dwmac still works on all of them.
Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Kalesh A P [Tue, 20 Dec 2016 15:14:30 +0000 (10:14 -0500)]
be2net: Increase skb headroom size to 256 bytes
The driver currently allocates 128 bytes of skb headroom.
This was found to be insufficient with some configurations
like Geneve tunnels, which resulted in skb head reallocations.
Increase the headroom to 256 bytes to fix this.
Signed-off-by: Kalesh A P <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Larry Finger [Tue, 20 Dec 2016 02:38:12 +0000 (20:38 -0600)]
rtlwifi: Fix kernel oops introduced with commit 2d8688dbd4c9
With commit 2d8688dbd4c9 {"rtlwifi: Use dev_kfree_skb_irq instead of
kfree_skb"), the method used to free an skb was changed because the
kfree_skb() was inside a spinlock. What was forgotten is that kfree_skb()
guards against a NULL value for the argument. Routine dev_kfree_skb_irq()
does not, and a test is needed to prevent kernel panics.
Fixes: 2d8688dbd4c9 ("rtlwifi: Use dev_kfree_skb_irq instead of kfree_skb") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> # 4.9+ Cc: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Tobias Klausmann [Tue, 13 Dec 2016 17:08:07 +0000 (18:08 +0100)]
ath9k: do not return early to fix rcu unlocking
Starting with commit c028a7c746ea ("ath9k: use ieee80211_tx_status_noskb
where possible") the driver uses rcu_read_lock() && rcu_read_unlock(), yet on
returning early in ath_tx_edma_tasklet() the unlock is missing leading to stalls
and suspicious RCU usage:
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: c028a7c746ea ("ath9k: use ieee80211_tx_status_noskb where possible") Cc: <stable@vger.kernel.org> # v4.9 Acked-by: Felix Fietkau <nbd@nbd.name> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Pull networking fixes and cleanups from David Miller:
1) Use rb_entry() instead of hardcoded container_of(), from Geliang
Tang.
2) Use correct memory barriers in stammac driver, from Pavel Machek.
3) Fix assoc bind address handling in SCTP, from Xin Long.
4) Make the length check for UFO handling consistent between
__ip_append_data() and ip_finish_output(), from Zheng Li.
5) HSI driver compatible strings were busted fro hix5hd2, from Dongpo
Li.
6) Handle devm_ioremap() errors properly in cavium driver, from Arvind
Yadav.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
RDS: use rb_entry()
net_sched: sch_netem: use rb_entry()
net_sched: sch_fq: use rb_entry()
net/mlx5: use rb_entry()
ethernet: sfc: Add Kconfig entry for vendor Solarflare
sctp: not copying duplicate addrs to the assoc's bind address list
sctp: reduce indent level in sctp_copy_local_addr_list
ARM: dts: hix5hd2: don't change the existing compatible string
net: hix5hd2_gmac: fix compatible strings name
openvswitch: Add a missing break statement.
net: netcp: ethss: fix 10gbe host port tx pri map configuration
net: netcp: ethss: fix errors in ethtool ops
fsl/fman: enable compilation on ARM64
fsl/fman: A007273 only applies to PPC SoCs
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
fsl/fman: fix 1G support for QSGMII interfaces
dt: bindings: net: use boolean dt properties for eee broken modes
net: phy: use boolean dt properties for eee broken modes
net: phy: fix sign type error in genphy_config_eee_advert
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
...
Linus Torvalds [Tue, 20 Dec 2016 23:24:32 +0000 (15:24 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge final set of updates from Andrew Morton:
- a series to make IMA play better across kexec
- a handful of random fixes
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
printk: fix typo in CONSOLE_LOGLEVEL_DEFAULT help text
ratelimit: fix WARN_ON_RATELIMIT return value
kcov: make kcov work properly with KASLR enabled
arm64: setup: introduce kaslr_offset()
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
ima: platform-independent hash value
ima: define a canonical binary_runtime_measurements list format
ima: support restoring multiple template formats
ima: store the builtin/custom template definitions in a list
ima: on soft reboot, save the measurement list
powerpc: ima: send the kexec buffer to the next kernel
ima: maintain memory size needed for serializing the measurement list
ima: permit duplicate measurement list entries
ima: on soft reboot, restore the measurement list
powerpc: ima: get the kexec buffer passed by the previous kernel
Linus Torvalds [Tue, 20 Dec 2016 23:17:55 +0000 (15:17 -0800)]
Merge tag 'doc-4.10-3' of git://git.lwn.net/linux
Pull documentation fix from Jonathan Corbet:
"A single fix for the build system.
It would appear that the docutils developers, in their wisdom, broke
the API in the 0.13 release. This fix detects the breakage and allows
the docs to be built with both the old and new versions"
* tag 'doc-4.10-3' of git://git.lwn.net/linux:
docs: sphinx-extensions: make rstFlatTable work with docutils 0.13
Linus Torvalds [Tue, 20 Dec 2016 23:16:00 +0000 (15:16 -0800)]
Merge tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull arch/microblaze updates from Michal Simek:
- wire-up new syscalls
- add new codes and fpga families
- fix a return value
* tag 'microblaze-4.10-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add new fpga families
microblaze: Add missing release version code v9.6 and v10
microblaze: Add missing syscalls
microblaze: Fix return value from xilinx_timer_init
- clean up arch/xtensa/kernel/setup.c: move S32C1I self-test out of it,
remove unused declarations, fix screen_info definition
* tag 'xtensa-20161219' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: update DMA-related Documentation/features entries
xtensa: configure shared DMA pool reservation in kc705 DTS
xtensa: enable HAVE_DMA_CONTIGUOUS
xtensa: move S32C1I self-test to a separate file
xtensa: fix screen_info, clean up unused declarations in setup.c
Geliang Tang [Tue, 20 Dec 2016 14:02:18 +0000 (22:02 +0800)]
RDS: use rb_entry()
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Tue, 20 Dec 2016 14:02:14 +0000 (22:02 +0800)]
net/mlx5: use rb_entry()
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Klauser [Tue, 20 Dec 2016 13:38:26 +0000 (14:38 +0100)]
ethernet: sfc: Add Kconfig entry for vendor Solarflare
Since commit
fe5efdd1372a ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
there are two drivers for Solarflare devices, but both still show up
directly beneath "Ethernet driver support" in the Kconfig. Follow the
pattern of other vendors and group them beneath an own vendor Kconfig
entry for Solarflare.
Cc: Edward Cree <ecree@solarflare.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 20 Dec 2016 05:49:50 +0000 (13:49 +0800)]
sctp: not copying duplicate addrs to the assoc's bind address list
sctp.local_addr_list is a global address list that is supposed to include
all the local addresses. sctp updates this list according to NETDEV_UP/
NETDEV_DOWN notifications.
However, if multiple NICs have the same address, the global list would
have duplicate addresses. Even if for one NIC, promote secondaries in
__inet_del_ifa can also lead to accumulating duplicate addresses.
When sctp binds address 'ANY' and creates a connection, it copies all
the addresses from global list into asoc's bind addr list, which makes
sctp pack the duplicate addresses into INIT/INIT_ACK packets.
This patch is to filter the duplicate addresses when copying the addrs
from global list in sctp_copy_local_addr_list and unpacking addr_param
from cookie in sctp_raw_to_bind_addrs to asoc's bind addr list.
Note that we can't filter the duplicate addrs when global address list
gets updated, As NETDEV_DOWN event may remove an addr that still exists
in another NIC.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 20 Dec 2016 05:49:49 +0000 (13:49 +0800)]
sctp: reduce indent level in sctp_copy_local_addr_list
This patch is to reduce indent level by using continue when the addr
is not allowed, and also drop end_copy by using break.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Dec 2016 19:12:30 +0000 (14:12 -0500)]
Merge branch 'hix5hd2_gmac-compatible-string'
Dongpo Li says:
====================
net: hix5hd2_gmac: keep the compatible string not changed
This patch series fix the patch: ba6b33c175a7 ("net: hix5hd2_gmac: add generic compatible string")
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dongpo Li [Tue, 20 Dec 2016 02:09:29 +0000 (10:09 +0800)]
ARM: dts: hix5hd2: don't change the existing compatible string
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change it.
We should only add the generic compatible string "hisi-gmac-v1".
Fixes: 8b126cd749ee ("ARM: dts: hix5hd2: add gmac generic compatible and clock names") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dongpo Li [Tue, 20 Dec 2016 02:09:28 +0000 (10:09 +0800)]
net: hix5hd2_gmac: fix compatible strings name
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
We also add another SoC compatible string in dt binding documentation
and describe which generic version the SoC belongs to.
Fixes: ba6b33c175a7 ("net: hix5hd2_gmac: add generic compatible string") Signed-off-by: Dongpo Li <lidongpo@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jarno Rajahalme [Tue, 20 Dec 2016 01:06:33 +0000 (17:06 -0800)]
openvswitch: Add a missing break statement.
Add a break statement to prevent fall-through from
OVS_KEY_ATTR_ETHERNET to OVS_KEY_ATTR_TUNNEL. Without the break
actions setting ethernet addresses fail to validate with log messages
complaining about invalid tunnel attributes.
Fixes: 521d091516 ("openvswitch: netlink: support L3 packets") Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Pravin B Shelar <pshelar@ovn.org> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WingMan Kwok [Mon, 19 Dec 2016 22:55:57 +0000 (17:55 -0500)]
net: netcp: ethss: fix 10gbe host port tx pri map configuration
This patch adds the missing 10gbe host port tx priority map
configurations.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WingMan Kwok [Mon, 19 Dec 2016 22:55:56 +0000 (17:55 -0500)]
net: netcp: ethss: fix errors in ethtool ops
In ethtool ops, it needs to retrieve the corresponding
ethss module (gbe or xgbe) from the net_device structure.
Prior to this patch, the retrieving procedure only
checks for the gbe module. This patch fixes the issue
by checking the xgbe module if the net_device structure
does not correspond to the gbe module.
Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Dec 2016 18:55:35 +0000 (13:55 -0500)]
Merge branch 'fsl-fixes'
Madalin Bucur says:
====================
fsl/fman: fixes for ARM
The patch set fixes advertised speeds for QSGMII interfaces, disables A007273 erratum workaround on non-PowerPC platforms where it does not
apply, enables compilation on ARM64 and addresses a probing issue on
non PPC platforms.
Changes from v3: removed redundant comment, added ack by Scott
Changes from v2: merged fsl/fman changes to avoid a point of failure
Changes from v1: unifying probing on all supported platforms
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 19 Dec 2016 20:42:44 +0000 (22:42 +0200)]
powerpc: fsl/fman: remove fsl,fman from of_device_ids[]
The fsl/fman drivers will use of_platform_populate() on all
supported platforms. Call of_platform_populate() to probe the
FMan sub-nodes.
Signed-off-by: Igal Liberman <igal.liberman@freescale.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Mon, 19 Dec 2016 20:42:43 +0000 (22:42 +0200)]
fsl/fman: fix 1G support for QSGMII interfaces
QSGMII ports were not advertising 1G speed.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 20 Dec 2016 18:50:51 +0000 (13:50 -0500)]
Merge branch 'phy-broken-modes'
Jerome Brunet says:
====================
phy: Fix integration of eee-broken-modes
The purpose of this series is to fix the integration of the ethernet phy
property "eee-broken-modes" [0]
The v3 of this series has been merged, missing a fix (error reported by
kbuild robot) available in the v4 [1]
More importantly, Florian opposed adding a DT property mapping a device
register this directly [2]. The concern was that the property could be
abused to implement platform configuration policy. After discussing it,
I think we agreed that such information about the HW (defect) should appear
in the platform DT. However, the preferred way is to add a boolean property
for each EEE broken mode.
jbrunet [Mon, 19 Dec 2016 15:05:38 +0000 (16:05 +0100)]
dt: bindings: net: use boolean dt properties for eee broken modes
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jbrunet [Mon, 19 Dec 2016 15:05:37 +0000 (16:05 +0100)]
net: phy: use boolean dt properties for eee broken modes
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.
While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.
In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.
Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
jbrunet [Mon, 19 Dec 2016 15:05:36 +0000 (16:05 +0100)]
net: phy: fix sign type error in genphy_config_eee_advert
In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is
checked to know if the register could be accessed but the result is
assigned to a 'u32'.
Changing to 'int' to correctly get errors from phy_read_mmd_indirect.
Fixes: 7479b1281af6 ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Weiner [Tue, 20 Dec 2016 00:23:03 +0000 (16:23 -0800)]
mm: fadvise: avoid expensive remote LRU cache draining after FADV_DONTNEED
When FADV_DONTNEED cannot drop all pages in the range, it observes that
some pages might still be on per-cpu LRU caches after recent
instantiation and so initiates remote calls to all CPUs to flush their
local caches. However, in most cases, the fadvise happens from the same
context that instantiated the pages, and any pre-LRU pages in the
specified range are most likely sitting on the local CPU's LRU cache,
and so in many cases this results in unnecessary remote calls, which, in
a loaded system, can hold up the fadvise() call significantly.
[ I didn't record it in the extreme case we observed at Facebook,
unfortunately. We had a slow-to-respond system and noticed it
lru_add_drain_all() leading the profile during fadvise calls. This
patch came out of thinking about the code and how we commonly call
FADV_DONTNEED.
FWIW, I wrote a silly directory tree walker/searcher that recurses
through /usr to read and FADV_DONTNEED each file it finds. On a 2
socket 40 ht machine, over 1% is spent in lru_add_drain_all(). With
the patch, that cost is gone; the local drain cost shows at 0.09%. ]
Try to avoid the remote call by flushing the local LRU cache before even
attempting to invalidate anything. It's a cheap operation, and the
local LRU cache is the most likely to hold any pre-LRU pages in the
specified fadvise range.
Andreas Steffen [Tue, 20 Dec 2016 00:23:00 +0000 (16:23 -0800)]
ima: platform-independent hash value
For remote attestion it is important for the ima measurement values to
be platform-independent. Therefore integer fields to be hashed must be
converted to canonical format.
Link: http://lkml.kernel.org/r/1480554346-29071-11-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Andreas Steffen <andreas.steffen@strongswan.org> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:57 +0000 (16:22 -0800)]
ima: define a canonical binary_runtime_measurements list format
The IMA binary_runtime_measurements list is currently in platform native
format.
To allow restoring a measurement list carried across kexec with a
different endianness than the targeted kernel, this patch defines
little-endian as the canonical format. For big endian systems wanting
to save/restore the measurement list from a system with a different
endianness, a new boot command line parameter named "ima_canonical_fmt"
is defined.
Considerations: use of the "ima_canonical_fmt" boot command line option
will break existing userspace applications on big endian systems
expecting the binary_runtime_measurements list to be in platform native
format.
Link: http://lkml.kernel.org/r/1480554346-29071-10-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:54 +0000 (16:22 -0800)]
ima: support restoring multiple template formats
The configured IMA measurement list template format can be replaced at
runtime on the boot command line, including a custom template format.
This patch adds support for restoring a measuremement list containing
multiple builtin/custom template formats.
Link: http://lkml.kernel.org/r/1480554346-29071-9-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:51 +0000 (16:22 -0800)]
ima: store the builtin/custom template definitions in a list
The builtin and single custom templates are currently stored in an
array. In preparation for being able to restore a measurement list
containing multiple builtin/custom templates, this patch stores the
builtin and custom templates as a linked list. This will permit
defining more than one custom template per boot.
Link: http://lkml.kernel.org/r/1480554346-29071-8-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:48 +0000 (16:22 -0800)]
ima: on soft reboot, save the measurement list
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and restored on boot.
This patch uses the kexec buffer passing mechanism to pass the
serialized IMA binary_runtime_measurements to the next kernel.
Link: http://lkml.kernel.org/r/1480554346-29071-7-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:38 +0000 (16:22 -0800)]
ima: permit duplicate measurement list entries
Measurements carried across kexec need to be added to the IMA
measurement list, but should not prevent measurements of the newly
booted kernel from being added to the measurement list. This patch adds
support for allowing duplicate measurements.
The "boot_aggregate" measurement entry is the delimiter between soft
boots.
Link: http://lkml.kernel.org/r/1480554346-29071-4-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mimi Zohar [Tue, 20 Dec 2016 00:22:35 +0000 (16:22 -0800)]
ima: on soft reboot, restore the measurement list
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and restored on boot. This
patch restores the measurement list.
Link: http://lkml.kernel.org/r/1480554346-29071-3-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
powerpc: ima: get the kexec buffer passed by the previous kernel
Patch series "ima: carry the measurement list across kexec", v8.
The TPM PCRs are only reset on a hard reboot. In order to validate a
TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement
list of the running kernel must be saved and then restored on the
subsequent boot, possibly of a different architecture.
The existing securityfs binary_runtime_measurements file conveniently
provides a serialized format of the IMA measurement list. This patch
set serializes the measurement list in this format and restores it.
Up to now, the binary_runtime_measurements was defined as architecture
native format. The assumption being that userspace could and would
handle any architecture conversions. With the ability of carrying the
measurement list across kexec, possibly from one architecture to a
different one, the per boot architecture information is lost and with it
the ability of recalculating the template digest hash. To resolve this
problem, without breaking the existing ABI, this patch set introduces
the boot command line option "ima_canonical_fmt", which is arbitrarily
defined as little endian.
The need for this boot command line option will be limited to the
existing version 1 format of the binary_runtime_measurements.
Subsequent formats will be defined as canonical format (eg. TPM 2.0
support for larger digests).
A simplified method of Thiago Bauermann's "kexec buffer handover" patch
series for carrying the IMA measurement list across kexec is included in
this patch set. The simplified method requires all file measurements be
taken prior to executing the kexec load, as subsequent measurements will
not be carried across the kexec and restored.
This patch (of 10):
The IMA kexec buffer allows the currently running kernel to pass the
measurement list via a kexec segment to the kernel that will be kexec'd.
The second kernel can check whether the previous kernel sent the buffer
and retrieve it.
This is the architecture-specific part which enables IMA to receive the
measurement list passed by the previous kernel. It will be used in the
next patch.
The change in machine_kexec_64.c is to factor out the logic of removing
an FDT memory reservation so that it can be used by remove_ima_buffer.
Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.com Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zheng li [Mon, 12 Dec 2016 01:56:05 +0000 (09:56 +0800)]
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
There is an inconsistent conditional judgement in __ip_append_data and
ip_finish_output functions, the variable length in __ip_append_data just
include the length of application's payload and udp header, don't include
the length of ip header, but in ip_finish_output use
(skb->len > ip_skb_dst_mtu(skb)) as judgement, and skb->len include the
length of ip header.
That causes some particular application's udp payload whose length is
between (MTU - IP Header) and MTU were fragmented by ip_fragment even
though the rst->dev support UFO feature.
Add the length of ip header to length in __ip_append_data to keep
consistent conditional judgement as ip_finish_output for ip fragment.
Signed-off-by: Zheng Li <james.z.li@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Linus Torvalds [Mon, 19 Dec 2016 16:23:53 +0000 (08:23 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, fsnotify and ext2 updates from Jan Kara:
"Changes to locking of some quota operations from dedicated quota mutex
to s_umount semaphore, a fsnotify fix and a simple ext2 fix"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix bogus warning in dquot_disable()
fsnotify: Fix possible use-after-free in inode iteration on umount
ext2: reject inodes with negative size
quota: Remove dqonoff_mutex
ocfs2: Use s_umount for quota recovery protection
quota: Remove dqonoff_mutex from dquot_scan_active()
ocfs2: Protect periodic quota syncing with s_umount semaphore
quota: Use s_umount protection for quota operations
quota: Hold s_umount in exclusive mode when enabling / disabling quotas
fs: Provide function to get superblock with exclusive s_umount
Linus Torvalds [Mon, 19 Dec 2016 16:21:29 +0000 (08:21 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Early fixes for x86.
Instead of the (botched) revert, the lockdep/might_sleep splat has a
real fix provided by Andrea"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
kvm: take srcu lock around kvm_steal_time_set_preempted()
kvm: fix schedule in atomic in kvm_steal_time_set_preempted()
KVM: hyperv: fix locking of struct kvm_hv fields
KVM: x86: Expose Intel AVX512IFMA/AVX512VBMI/SHA features to guest.
kvm: nVMX: Correct a VMX instruction error code for VMPTRLD
* tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
mfd: tps65217: Support an interrupt pin as the system wakeup
mfd: tps65217: Make an interrupt handler simpler
mfd: tps65217: Update register interrupt mask bits instead of writing operation
mfd: tps65217: Specify the IRQ name
mfd: tps65217: Fix page fault on unloading modules
mfd: palmas: Remove redundant check in palmas_power_off
mfd: arizona: Disable IRQs during driver remove
mfd: pm8xxx: add support to pm8821
mfd: intel-lpss: Try to enable Memory-Write-Invalidate
mfd: rn5t618: Add Ricoh RC5T619 PMIC support
mfd: axp20x: Add address extension registers for AXP806 regmap
mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE()
mfd: core: Fix device reference leak in mfd_clone_cell
mfd: bcm590xx: Simplify a test
mfd: sun4i-gpadc: Select regmap-irq
mfd: abx500-core: drop unused MODULE_ tags from non-modular code
mfd: ab8500: make sysctrl explicitly non-modular
mfd: ab8500-gpadc: Make it explicitly non-modular
mfd: ab8500-debugfs: Make it explicitly non-modular
mfd: ab8500-core: Make it explicitly non-modular
...
Pavel Machek [Sun, 18 Dec 2016 20:38:12 +0000 (21:38 +0100)]
stmmac: fix memory barriers
Fix up memory barriers in stmmac driver. They are meant to protect
against DMA engine, so smp_ variants are certainly wrong, and dma_
variants are preferable.
Signed-off-by: Pavel Machek <pavel@denx.de> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jim Mattson [Mon, 12 Dec 2016 19:01:37 +0000 (11:01 -0800)]
kvm: nVMX: Allow L1 to intercept software exceptions (#BP and #OF)
When L2 exits to L0 due to "exception or NMI", software exceptions
(#BP and #OF) for which L1 has requested an intercept should be
handled by L1 rather than L0. Previously, only hardware exceptions
were forwarded to L1.
Signed-off-by: Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sudeep Holla [Tue, 29 Nov 2016 14:37:05 +0000 (14:37 +0000)]
mailbox: mailbox-test: allow reserved areas in SRAM
When CONFIG_SRAM is enable and the SRAM region is found, the entire SRAM
region resource is requested and marked as occupied by SRAM driver even
if certain parts of regions is marked reserved.
It's quite possible that a small region of the SRAM is reserved for all
the mailbox communication and hence it may fail to request the region
as it's already marked busy region.
This patch tries to just do a ioremap of this mailbox memory region if
it finds it busy.
Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Sudeep Holla [Tue, 29 Nov 2016 14:37:04 +0000 (14:37 +0000)]
mailbox: mailbox-test: add support for fasync/poll
Currently the read operation on the message debug file returns error if
there's no data ready to be read. It expects the userspace to retry if
it fails. Since the mailbox response could be asynchronous, it would be
good to add support to block the read until the data is available.
We can also implement poll file operations so that the userspace can
wait to become ready to perform any I/O.
This patch implements the poll and fasync file operation callback for
the test mailbox device.
Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Earlier versions of the PDC driver registered for both
transmit and receive interrupts. The hard IRQ handler had to
communicate to the soft handler which interrupt(s) had occurred.
The PDC driver no longer registers for tx interrupts. So there is
no reason to save the intstatus. So remove the intstatus member
of the PDC state.
Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Rob Rice [Mon, 14 Nov 2016 18:26:03 +0000 (13:26 -0500)]
mailbox: bcm-pdc: Performance improvements
Three changes to improve performance in the PDC driver:
- disable and reenable interrupts while the interrupt handler is
running
- update rxin and txin descriptor indexes more efficiently
- group receive descriptor context into a structure and keep
context in a single array rather than five to improve locality
of reference
Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Rob Rice [Mon, 14 Nov 2016 18:26:02 +0000 (13:26 -0500)]
mailbox: bcm-pdc: Don't use iowrite32 to write DMA descriptors
In PDC driver, it is not necessary to use iowrite32()
when writing DMA descriptors to the transmit and receive rings.
The ring memory is in host memory. So convert to normal
assignment statements.
Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Rob Rice [Mon, 14 Nov 2016 18:26:01 +0000 (13:26 -0500)]
mailbox: bcm-pdc: Convert from threaded IRQ to tasklet
Previously used threaded IRQs in the PDC driver to defer
processing the rx DMA ring after getting an rx done interrupt.
Instead, use a tasklet at normal priority for deferred processing.
Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Rob Rice [Mon, 14 Nov 2016 18:25:58 +0000 (13:25 -0500)]
mailbox: bcm-pdc: Convert from interrupts to poll for tx done
The PDC driver is a mailbox controller. A mailbox controller
can report that a mailbox message has been "transmitted" either when
a tx interrupt fires or by having the mailbox framework poll. This
commit converts the PDC driver to the poll method. We found that the
tx interrupt happens when the descriptors are read by the SPU hw. Thus,
the interrupt method does not allow more than one tx message in the PDC
tx DMA ring at a time. To keep the SPU hw busy, we would like to keep
the tx ring full under heavy load.
With the poll method, the PDC driver responds that the previous message
has been transmitted if the tx ring has space for another message.
SPU request messages take a variable number of descriptors. If 15
descriptors are available, there is a good chance another message will
fit. Also increased the ring size from 128 to 512 descriptors.
With this change, I found the PDC driver hangs on its spinlock under
heavy load. The PDC spinlock is not required; so I removed it. Calls
to pdc_send_data() are already synchronized because of the channel
spinlock in the mailbox framework. Other references to ring indexes
should not require locking because they only written on either the
tx or rx side.
Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Steve Lin [Mon, 14 Nov 2016 18:25:57 +0000 (13:25 -0500)]
mailbox: bcm-pdc: PDC driver leaves debugfs files after removal
Minor fix to ensure that debugfs stats pseudo-files are
removed when driver module is unloaded. Previously, the call to
debugfs_remove_recursive() was never being called since the
directory was not empty, and a seg fault would occur if another
process tried to access these leftover files.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Steve Lin [Mon, 14 Nov 2016 18:25:56 +0000 (13:25 -0500)]
mailbox: bcm-pdc: Changes so mbox client can be removed / re-inserted
Ensure that DMA is disabled, and pointers reset, when changing
DMA base addresses in pdc_ring_init(). This allows a mailbox client
to be re-inserted after being removed. Otherwise, the DMA doesn't
restart so the client hangs while being reinserted.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com> Signed-off-by: Rob Rice <rob.rice@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
mailbox: sti: Fix module autoload for OF registration
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/mailbox/mailbox-sti.ko | grep alias
alias: platform:mailbox-sti
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
$
After this patch:
$ modinfo drivers/mailbox/mailbox-test.ko | grep alias
alias: of:N*T*Cmailbox-testC*
alias: of:N*T*Cmailbox-test
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
projects / kernel.git / log