Convert the remaining occurences in sysfs code to kstrtouint().
While at it move some input parsing out of locked sections, replace an
open-coded clamp() and remove some unnecessary run-time checks for
ipatoe->mask_bits that are already enforced when creating the object.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
card->ipato is currently protected by the conf_mutex. But most users
also hold the ip_lock - in particular qeth_l3_add_ip().
So slightly expand the sections under ip_lock in a few places (to
effectively cover a few error & no-op cases), and then drop the
conf_mutex where it's no longer needed.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: microchip: Make `lan743x_pm_suspend` function return right value
drivers/net/ethernet/microchip/lan743x_main.c: In function lan743x_pm_suspend:
`ret` is set but not used. In fact, `pci_prepare_to_sleep` function value should
be the right value of `lan743x_pm_suspend` function, therefore, fix it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 23 Sep 2020 00:44:59 +0000 (17:44 -0700)]
Merge tag 'mlx5-updates-2020-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-09-21
Multi packet TX descriptor support for SKBs.
This series introduces some refactoring of the regular TX data path in
mlx5 and adds the Enhanced TX MPWQE feature support. MPWQE stands for
multi-packet work queue element, and it can serve multiple packets,
reducing the PCI bandwidth spent on control traffic. It should improve
performance in scenarios where PCI is the bottleneck, and xmit_more is
signaled by the kernel. The refactoring done in this series also
improves the packet rate on its own.
MPWQE is already implemented in the XDP tx path, this series adds the
support of MPWQE for regular kernel SKB tx path.
MPWQE is supported from ConnectX-5 and onward, for legacy devices we need
to keep backward compatibility for regular (Single packet) WQE descriptor.
MPWQE is not compatible with certain offloads and features, such as TLS
offload, TSO, nonlinear SKBs. If such incompatible features are in use,
the driver gracefully falls back to non-MPWQE per SKB.
Prior to the final patch "net/mlx5e: Enhanced TX MPWQE for SKBs" that adds
the actual support, Maxim did some refactoring to the tx data path to
split it into stages and smaller helper functions that can be utilized and
reused for both legacy and new MPWQE feature.
Performance testing:
UDP performance is improved in a single stream pktgen test:
Packet rate: 16.86 Mpps (±0.15 Mpps) -> 20.94 Mpps (±0.33 Mpps)
Instructions per packet: 434 -> 329
Cycles per packet: 158 -> 123
Instructions per cycle: 2.75 -> 2.67
TCP and XDP_TX single stream tests show no performance difference.
MPWQE can reduce PCI bandwidth:
PCI Gen2, pktgen at fixed rate of 36864000 pps on 24 CPU cores:
Inbound PCI utilization with MPWQE off: 80.3%
Inbound PCI utilization with MPWQE on: 59.0%
PCI Gen3, pktgen at fixed rate of 56064000 pps on 24 CPU cores:
Inbound PCI utilization with MPWQE off: 65.4%
Inbound PCI utilization with MPWQE on: 49.3%
MPWQE can also reduce CPU load, increasing the packet rate in case of
CPU bottleneck:
PCI Gen2, pktgen at full rate on 24 CPU cores:
Packet rate with MPWQE off: 37.5 Mpps
Packet rate with MPWQE on: 49.0 Mpps
PCI Gen3, pktgen at full rate on 24 CPU cores:
Packet rate with MPWQE off: 57.0 Mpps
Packet rate with MPWQE on: 66.8 Mpps
====================
devlink: Use nla_policy to validate range
This two small patches uses nla_policy to validate user specified
fields are in valid range or not.
Patch summary:
Patch-1 checks the range of eswitch mode field
Patch-2 checks for the port type field. It eliminates a check in
code by using nla policy infrastructure.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"No common topic, just assorted fixes"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: fix the ->direct_IO() treatment of iov_iter
fs: fix cast in fsparam_u32hex() macro
vboxsf: Fix the check for the old binary mount-arguments struct
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
Merge tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes - most of them regression fixes from this cycle, but also
a few stable heading fixes, and a build fix for the included demo tool
since some systems now actually have gettid() available"
* tag 'io_uring-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
io_uring: fix openat/openat2 unified prep handling
io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL
tools/io_uring: fix compile breakage
io_uring: don't use retry based buffered reads for non-async bdev
io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there
io_uring: don't run task work on an exiting task
io_uring: drop 'ctx' ref on task work cancelation
io_uring: grab any needed state during defer prep
Merge tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few NVMe fixes, and a dasd write zero fix"
* tag 'block-5.9-2020-09-22' of git://git.kernel.dk/linux-block:
nvmet: get transport reference for passthru ctrl
nvme-core: get/put ctrl and transport module in nvme_dev_open/release()
nvme-tcp: fix kconfig dependency warning when !CRYPTO
nvme-pci: disable the write zeros command for Intel 600P/P3100
s390/dasd: Fix zero write for FBA devices
Merge tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check kprobe is enabled before unregistering from ftrace as it isn't
registered when disabled.
- Remove kprobes enabled via command-line that is on init text when
freed.
- Add missing RCU synchronization for ftrace trampoline symbols removed
from kallsyms.
- Free trampoline on error path if ftrace_startup() fails.
- Give more space for the longer PID numbers in trace output.
- Fix a possible double free in the histogram code.
- A couple of fixes that were discovered by sparse.
* tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: init: make xbc_namebuf static
kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot
tracing: fix double free
ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer
tracing: Make the space reserved for the pid wider
ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms
ftrace: Free the trampoline when ftrace_startup() fails
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
This commit adds support for Enhanced TX MPWQE feature in the regular
(SKB) data path. A MPWQE (multi-packet work queue element) can serve
multiple packets, reducing the PCI bandwidth on control traffic.
Two new stats (tx*_mpwqe_blks and tx*_mpwqe_pkts) are added. The feature
is on by default and controlled by the skb_tx_mpwqe private flag.
In a MPWQE, eseg is shared among all packets, so eseg-based offloads
(IPSEC, GENEVE, checksum) run on a separate eseg that is compared to the
eseg of the current MPWQE session to decide if the new packet can be
added to the same session.
MPWQE is not compatible with certain offloads and features, such as TLS
offload, TSO, nonlinear SKBs. If such incompatible features are in use,
the driver gracefully falls back to non-MPWQE.
This change has no performance impact in TCP single stream test and
XDP_TX single stream test.
UDP pktgen, 64-byte packets, single stream, MPWQE off:
Packet rate: 16.96 Mpps (±0.12 Mpps) -> 17.01 Mpps (±0.20 Mpps)
Instructions per packet: 421 -> 429
Cycles per packet: 156 -> 161
Instructions per cycle: 2.70 -> 2.67
UDP pktgen, 64-byte packets, single stream, MPWQE on:
Packet rate: 16.96 Mpps (±0.12 Mpps) -> 20.94 Mpps (±0.33 Mpps)
Instructions per packet: 421 -> 329
Cycles per packet: 156 -> 123
Instructions per cycle: 2.70 -> 2.67
Enabling MPWQE can reduce PCI bandwidth:
PCI Gen2, pktgen at fixed rate of 36864000 pps on 24 CPU cores:
Inbound PCI utilization with MPWQE off: 80.3%
Inbound PCI utilization with MPWQE on: 59.0%
PCI Gen3, pktgen at fixed rate of 56064000 pps on 24 CPU cores:
Inbound PCI utilization with MPWQE off: 65.4%
Inbound PCI utilization with MPWQE on: 49.3%
Enabling MPWQE can also reduce CPU load, increasing the packet rate in
case of CPU bottleneck:
PCI Gen2, pktgen at full rate on 24 CPU cores:
Packet rate with MPWQE off: 37.5 Mpps
Packet rate with MPWQE on: 49.0 Mpps
PCI Gen3, pktgen at full rate on 24 CPU cores:
Packet rate with MPWQE off: 57.0 Mpps
Packet rate with MPWQE on: 66.8 Mpps
net/mlx5e: Rename xmit-related structs to generalize them
As preparation for the upcoming TX MPWQE support for SKBs, rename struct
mlx5e_xdp_mpwqe to mlx5e_tx_mpwqe and move it above struct mlx5e_txqsq.
This structure will be reused in the regular SQ and in the regular TX
data path. Also rename mlx5e_xdp_xmit_data to mlx5e_xmit_data - it will
be used in the upcoming TX MPWQE flow.
net/mlx5e: Generalize TX MPWQE checks for full session
As preparation for the upcoming TX MPWQE for SKBs, create a function
(mlx5e_tx_mpwqe_is_full) to check whether an MPWQE session is full. This
function will be shared by MPWQE code for XDP and for SKBs. Defines are
renamed and moved to make them not XDP-specific.
TX MPWQE support for SKBs is coming in one of the following patches, and
a single MPWQE can send multiple SKBs. This commit prepares the TX path
code to handle such cases:
1. An additional FIFO for SKBs is added, just like the FIFO for DMA
chunks.
2. struct mlx5e_tx_wqe_info will contain num_fifo_pkts. If a given WQE
contains only one packet, num_fifo_pkts will be zero, and the SKB will
be stored in mlx5e_tx_wqe_info, as usual. If num_fifo_pkts > 0, the SKB
pointer will be NULL, and the SKBs will be stored in the FIFO.
This change has no performance impact in TCP single stream test and
XDP_TX single stream test.
When compiled with a recent GCC, this change shows no visible
performance impact on UDP pktgen (burst 32) single stream test either:
Packet rate: 16.95 Mpps (±0.15 Mpps) -> 16.96 Mpps (±0.12 Mpps)
Instructions per packet: 429 -> 421
Cycles per packet: 160 -> 156
Instructions per cycle: 2.69 -> 2.70
net/mlx5e: Move the TLS resync check out of the function
Before this patch, mlx5e_ktls_tx_handle_resync_dump_comp checked for
resync_dump_frag_page. It happened for all WQEs without an SKB,
including padding WQEs, and required a function call. Normally, padding
WQEs happen more often than TLS resyncs. Take this check out of the
function and put it to an inline function to save a call on all padding
WQEs.
A constant for the number of DS in an empty WQE (i.e. a WQE without data
segments) is needed in multiple places (normal TX data path, MPWQE in
XDP), but currently we have a constant for XDP and an inline formula in
normal TX. This patch introduces a common constant.
Additionally, mlx5e_xdp_mpwqe_session_start is converted to use struct
assignment, because the code nearby is touched.
net/mlx5e: Small improvements for XDP TX MPWQE logic
Use MLX5E_XDP_MPW_MAX_WQEBBS to reserve space for a MPWQE, because it's
actually the maximal size a MPWQE can take.
Reorganize the logic that checks when to close the MPWQE session:
1. Put all checks into a single function.
2. When inline is on, make only one comparison - if it's false, the less
strict one will also be false. The compiler probably optimized it out
anyway, but it's clearer to also reflect it in the code.
The MLX5E_XDP_INLINE_WQE_* defines are also changed to make the
calculations more correct from the logical point of view. Though
MLX5E_XDP_INLINE_WQE_MAX_DS_CNT used to be 16 and didn't change its
value, the calculation used to be DIV_ROUND_UP(max inline packet size,
MLX5_SEND_WQE_DS), and the numerator should have included sizeof(struct
mlx5_wqe_inline_seg).
A huge function mlx5e_sq_xmit was split into several to achieve multiple
goals:
1. Reuse the code in IPoIB.
2. Better intergrate with TLS, IPSEC, GENEVE and checksum offloads. Now
it's possible to reserve space in the WQ before running eseg-based
offloads, so:
2.1. It's not needed to copy cseg and eseg after mlx5e_fill_sq_frag_edge
anymore.
2.2. mlx5e_txqsq_get_next_pi will be used instead of the legacy
mlx5e_fill_sq_frag_edge for better code maintainability and reuse.
3. Prepare for the upcoming TX MPWQE for SKBs. It will intervene after
mlx5e_sq_calc_wqe_attr to check if it's possible to use MPWQE, and the
code flow will split into two paths: MPWQE and non-MPWQE.
Two high-level functions are provided to send packets:
* mlx5e_xmit is called by the networking stack, runs offloads and sends
the packet. In one of the following patches, MPWQE support will be added
to this flow.
* mlx5e_sq_xmit_simple is called by the TLS offload, runs only the
checksum offload and sends the packet.
This change has no performance impact in TCP single stream test and
XDP_TX single stream test.
When compiled with a recent GCC, this change shows no visible
performance impact on UDP pktgen (burst 32) single stream test either:
Packet rate: 16.86 Mpps (±0.15 Mpps) -> 16.95 Mpps (±0.15 Mpps)
Instructions per packet: 434 -> 429
Cycles per packet: 158 -> 160
Instructions per cycle: 2.75 -> 2.69
net/mlx5e: Use struct assignment to initialize mlx5e_tx_wqe_info
Struct assignment guarantees that all fields of the structure are
initialized (those that are not mentioned are zeroed). It makes code
mode robust and reduces chances for unpredictable behavior when one
forgets to reset some field and it holds an old value from previous
iterations of using the structure.
net/mlx5e: Refactor inline header size calculation in the TX path
As preparation for the next patch, don't increase ihs to calculate
ds_cnt and then decrease it, but rather calculate the intermediate value
temporarily. This code has the same amount of arithmetic operations, but
now allows to split out ds_cnt calculation, which will be performed in
the next patch.
====================
Fix broken tc-flower rules for mscc_ocelot switches
All 3 switch drivers from the Ocelot family have the same bug in the
VCAP IS2 key offsets, which is that some keys are in the incorrect
order.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 21 Sep 2020 22:56:38 +0000 (01:56 +0300)]
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
The IS2 IP4_TCP_UDP key offsets do not correspond to the VSC7514
datasheet. Whether they work or not is unknown to me. On VSC9959 and
VSC9953, with the same mistake and same discrepancy from the
documentation, tc-flower src_port and dst_port rules did not work, so I
am assuming the same is true here.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xiaoliang Yang [Mon, 21 Sep 2020 22:56:36 +0000 (01:56 +0300)]
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT,
L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from
matching on src_port and dst_port for TCP and UDP packets.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 3f935c75eb52 ("inet_diag: support for wider protocol numbers") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Christoph Paasch <cpaasch@apple.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group()
which calls rtnl_dereference() instead of rcu_dereference(). In turn,
rtnl_dereference() calls rcu_dereference_protected() which assumes
operation under an RCU write-side critical section, which obviously is
not the case here. So, when the incorrect primitive is used to access
the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may
cause various unexpected problems.
I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot
share the same implementation. So fix the bug by splitting the 2
functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups
under proper locking annotations.
Fixes: 7582f5b70f9a ("bridge: add br_vlan_get_pvid_rcu()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 22 Sep 2020 00:32:42 +0000 (17:32 -0700)]
Merge tag 'mlx5-fixes-2020-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes-2020-09-18
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
v1->v2:
Remove missing patch from -stable list.
For -stable v5.1
('net/mlx5: Fix FTE cleanup')
For -stable v5.3
('net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported')
('net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported')
For -stable v5.7
('net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready')
For -stable v5.8
('net/mlx5e: Use RCU to protect rq->xdp_prog')
('net/mlx5e: Fix endianness when calculating pedit mask first bit')
('net/mlx5e: Use synchronize_rcu to sync with NAPI')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang [Mon, 21 Sep 2020 23:09:23 +0000 (07:09 +0800)]
net: Update MAINTAINERS for MediaTek switch driver
Update maintainers for MediaTek switch driver with Landen Chao who is
familiar with MediaTek MT753x switch devices and will help maintenance
from the vendor side.
Cc: Steven Liu <steven.liu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
The spinlock only needed when accessing the channel's icosq, grab the lock
after the buf allocation in resync_post_get_progress_params() to avoid
kzalloc(GFP_KERNEL) in atomic context.
Tariq Toukan [Sun, 28 Jun 2020 10:06:06 +0000 (13:06 +0300)]
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
The set of TLS TX global SW counters in mlx5e_tls_sw_stats_desc
is updated from all rings by using atomic ops.
This set of stats is used only in the FPGA TLS use case, not in
the Connect-X TLS one, where regular per-ring counters are used.
Do not expose them in the Connect-X use case, as this would cause
counter duplication. For example, tx_tls_drop_no_sync_data would
appear twice in the ethtool stats.
Alaa Hleihel [Tue, 25 Aug 2020 07:41:50 +0000 (10:41 +0300)]
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
The cited commit started to reuse function mlx5e_update_ndo_stats() for
the representors as well.
However, the function is hard-coded to work on mlx5e_nic_stats_grps only.
Due to this issue, the representors statistics were not updated in the
output of "ip -s".
Fix it to work with the correct group by extracting it from the caller's
profile.
Also, while at it and since this function became generic, move it to
en_stats.c and rename it accordingly.
Ron Diskin [Sun, 10 May 2020 11:39:51 +0000 (14:39 +0300)]
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
Currently the FW does not generate events for counters other than error
counters. Unlike ".get_ethtool_stats", ".ndo_get_stats64" (which ip -s
uses) might run in atomic context, while the FW interface is non atomic.
Thus, 'ip' is not allowed to issue FW commands, so it will only display
cached counters in the driver.
Add a SW counter (mcast_packets) in the driver to count rx multicast
packets. The counter also counts broadcast packets, as we consider it a
special case of multicast.
Use the counter value when calling "ip -s"/"ifconfig".
Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Dickman [Wed, 5 Aug 2020 14:56:04 +0000 (17:56 +0300)]
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
The cited commit creates peer miss group during switchdev mode
initialization in order to handle miss packets correctly while in VF
LAG mode. This is done regardless of FW support of such groups which
could cause rules setups failure later on.
Fix by adding FW capability check before creating peer groups/rule.
Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Roi Dayan [Sun, 26 Jul 2020 13:37:47 +0000 (16:37 +0300)]
net/mlx5e: CT: Fix freeing ct_label mapping
Add missing mapping remove call when removing ct rule,
as the mapping was allocated when ct rule was adding with ct_label.
Also there is a missing mapping remove call in error flow.
Fixes: 54b154ecfb8c ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Jianbo Liu [Tue, 7 Jul 2020 06:16:24 +0000 (06:16 +0000)]
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
When deleting vxlan flow rule under multipath, tun_info in parse_attr is
not freed when the rule is not ready.
Fixes: ef06c9ee8933 ("net/mlx5e: Allow one failure when offloading tc encap rules under multipath") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
As described in the previous commit, napi_synchronize doesn't quite fit
the purpose when we just need to wait until the currently running NAPI
quits. Its implementation waits until NAPI is not running by polling and
waiting for 1ms in between. In cases where we need to deactivate one
queue (e.g., recovery flows) or where we deactivate them one-by-one
(deactivate channel flow), we may get stuck in napi_synchronize forever
if other queues keep NAPI active, causing a soft lockup. Depending on
kernel configuration (CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC), it may result
in a kernel panic.
To fix the issue, use synchronize_rcu to wait for NAPI to quit, and wrap
the whole NAPI in rcu_read_lock.
Currently, the RQs are temporarily deactivated while hot-replacing the
XDP program, and napi_synchronize is used to make sure rq->xdp_prog is
not in use. However, napi_synchronize is not ideal: instead of waiting
till the end of a NAPI cycle, it polls and waits until NAPI is not
running, sleeping for 1ms between the periodic checks. Under heavy
workloads, this loop will never end, which may even lead to a kernel
panic if the kernel detects the hangup. Such workloads include XSK TX
and possibly also heavy RX (XSK or normal).
The fix is inspired by commit 326fe02d1ed6 ("net/mlx4_en: protect
ring->xdp_prog with rcu_read_lock"). As mlx5e_xdp_handle is already
protected by rcu_read_lock, and bpf_prog_put uses call_rcu to free the
program, there is no need for additional synchronization if proper RCU
functions are used to access the pointer. This patch converts all
accesses to rq->xdp_prog to use RCU functions.
Maor Gottlieb [Mon, 31 Aug 2020 17:50:42 +0000 (20:50 +0300)]
net/mlx5: Fix FTE cleanup
Currently, when an FTE is allocated, its refcount is decreased to 0
with the purpose it will not be a stand alone steering object and every
rule (destination) of the FTE would increase the refcount.
When mlx5_cleanup_fs is called while not all rules were deleted by the
steering users, it hit refcount underflow on the FTE once clean_tree
calls to tree_remove_node after the deleted rules already decreased
the refcount to 0.
FTE is no longer destroyed implicitly when the last rule (destination)
is deleted. mlx5_del_flow_rules avoids it by increasing the refcount on
the FTE and destroy it explicitly after all rules were deleted. So we
can avoid the refcount underflow by making FTE as stand alone object.
In addition need to set del_hw_func to FTE so the HW object will be
destroyed when the FTE is deleted from the cleanup_tree flow.
Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes") Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
this is a pull request of 38 patches for net-next.
the first 5 patches are by Colin Ian King, Alexandre Belloni and me and they
fix various spelling mistakes.
The next patch is by me and fixes the indention in the CAN raw protocol
according to the kernel coding style.
Diego Elio Pettenò contributes two patches to fix dead links in CAN's Kconfig.
Masahiro Yamada's patch removes the "WITH Linux-syscall-note" from SPDX tag of
C files.
AThe next 4 patches are by me and target the CAN device infrastructure and add
error propagation and improve the output of various messages to ease driver
development and debugging.
YueHaibing's patch for the c_can driver removes an unused inline function.
Next follows another patch by Colin Ian King, which removes the unneeded
initialization of a variable in the mcba_usb driver.
A patch by me annotates a fallthrough in the mscan driver.
The ti_hecc driver is converted to use devm_platform_ioremap_resource_byname()
in a patch by Dejin Zheng.
Liu Shixin's patch converts the pcan_usb_pro driver to make use of
le32_add_cpu() instead of open coding it.
Wang Hai's patch for the peak_pciefd_main driver removes an unused makro.
Vaibhav Gupta's patch converts the pch_can driver to generic power management.
Stephane Grosjean improves the pcan_usb usb driver by first documenting the
commands sent to the device and by adding support of rxerr/txerr counters.
The next patch is by me and cleans up the Kconfig of the CAN SPI drivers.
The next 6 patches all target the mcp251x driver, they are by Timo Schlüßler,
Andy Shevchenko, Tim Harvey and me. They update the DT bindings documentation,
sort the include files alphabetically, add GPIO support, make use of the
readx_poll_timeout() helper, and add support for half duplex SPI-controllers.
Wolfram Sang contributes a patch to update the contact email address in the
mscan driver, while Zhang Changzhong updates the clock handling.
The next patch is by and updates the rx-offload infrastructure to support
callback less usage.
The last 6 patches add support for the mcp25xxfd CAN SPI driver. First the
dt-bindings are added by Oleksij Rempel, the regmap infrastructure and the main
driver is contributed by me. Kurt Van Dijck adds listen-only support,
Manivannan Sadhasivam adds himself as maintainer, and Thomas Kopp himself as a
reviewer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Sep 2020 21:55:09 +0000 (14:55 -0700)]
Merge tag 'mac80211-next-for-net-next-2020-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time we have:
* some AP-side infrastructure for FILS discovery and
unsolicited probe resonses
* a major rework of the encapsulation/header conversion
offload from Felix, to fit better with e.g. AP_VLAN
interfaces
* performance fix for VHT A-MPDU size, don't limit to HT
* some initial patches for S1G (sub 1 GHz) support, more
will come in this area
* minor cleanups
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 21 Sep 2020 21:54:35 +0000 (14:54 -0700)]
Merge tag 'mac80211-for-net-2020-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few fixes:
* fix using HE on 2.4 GHz
* AQL (airtime queue limit) estimation & VHT160 fix
* do not oversize A-MPDUs if local capability is smaller than peer's
* fix radiotap on 6 GHz to not put 2.4 GHz flag
* fix Kconfig for lib80211
* little fixlet for 6 GHz channel number / frequency conversion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/natsemi/ns83820.c: In function ns83820_get_link_ksettings:
drivers/net/ethernet/natsemi/ns83820.c:1210:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
`tanar` is never used, so remove it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: phy: realtek: enable ALDPS to save power for RTL8211F
Enable ALDPS(Advanced Link Down Power Saving) to save power when
link down.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Dewar [Sat, 19 Sep 2020 19:28:10 +0000 (20:28 +0100)]
net: dsa: mt7530: Add some return-value checks
In mt7531_cpu_port_config(), if the variable port is neither 5 nor 6,
then variable interface will be used uninitialised. Change the function
to return -EINVAL in this case.
As the return value of mt7531_cpu_port_config() is never checked
(even though it returns an int) add a check in the correct place so that
the error can be passed up the call stack. Now that we correctly handle
errors thrown in this function, also check the return value of
mt7531_mac_config() in case an error occurs here. Also add misisng
checks to mt7530_setup() and mt7531_setup(), which are another level
further up the call stack.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Addresses-Coverity: 1496993 ("Uninitialized variables") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Fri, 18 Sep 2020 16:00:46 +0000 (18:00 +0200)]
net-sysfs: add backlog len and CPU id to softnet data
Currently the backlog status in not exposed to user-space.
Since long backlogs (or simply not empty ones) can be a
source of noticeable latency, -RT deployments need some way
to inspect it.
Additionally, there isn't a direct match between 'softnet_stat'
lines and the related CPU - sd for offline CPUs are not dumped -
so this patch also includes the CPU id into such entry.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 18 Sep 2020 14:33:11 +0000 (17:33 +0300)]
sfc: Fix error code in probe
This failure path should return a negative error code but it currently
returns success.
Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Update license and polish ENA driver code
This series adds the following:
- Change driver's license into SPDX format
- Capitalize all log prints in ENA driver
- Fix issues raised by static checkers
- Improve code readability by adding functions, fix spelling
mistakes etc.
- Update driver's documentation
Changed from previous version:
v1->v2: dropped patch that transforms pr_* log prints into dev_* prints
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The PCI vendor IDs in the documentation inaccurately describe the ENA
devices. For example, the 1d0f:ec20 can have LLQ support. The driver
loads in LLQ mode by default, and a message is printed to the kernel
ring if the mode isn't supported by the device, so the device table
isn't needed.
Also, LLQ can support various entry sizes, so the documentation is
updated to reflect that.
Interrupt moderation description is also updated to be more accurate.
Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
After running Sparse checker on the driver using
make C=1 M=drivers/net/ethernet/amazon/ena
the only error that is thrown is:
sparse: sparse: Using plain integer as NULL pointer
about the line
struct ena_calc_queue_size_ctx calc_queue_ctx = { 0 };
This patch fixes this warning, thus making our driver free (for now) of
Sparse errors/warnings.
To make a more complete work, this patch also fixes all static warnings
that were found using an internal static checker.
Signed-off-by: Ido Segev <idose@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Change RSS related macros and variables names
The formal name changes to "ENA_ADMIN_RSS_INDIRECTION_TABLE_CONFIG".
Indirection is the ability to reference "something" using "something else"
instead of the value itself.
Indirection table, as the name implies, is the ability to reference
CPU/Queue value using hash-to-CPU table instead of CPU/Queue itself.
This patch renames the variable keys_num, which describes the number of
words in the RSS hash key, to key_parts which makes its purpose clearer
in RSS context.
Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Remove redundant print of placement policy
The placement policy is printed in the process of queue creation in
ena_up(). No need to print it in ena_probe().
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Capitalize all log strings and improve code readability
Capitalize all log strings printed by the ena driver to make their
format uniform across it.
Also fix indentation, spelling mistakes and comments to improve code
readability. This also includes adding comments to macros/enums whose
purpose might be difficult to understand.
Separate some code into functions to make it easier to understand the
purpose of these lines.
Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Change log message to netif/dev function
Make log prints in ena_netdev use the same log functions as the rest of
the driver.
For the sake of consistency, all prints in ena_netdev file were
converted into netif_* format except where netdev struct isn't yet
defined. For these places, dev_* log functions are used (similar to
the patch for ena_com files).
This commit leaves some corner cases which would be changed in a
future patch.
Signed-off-by: Amit Bernstein <amitbern@amazon.com> Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Change license into format to SPDX in all files
All ena files should now use SPDX format in their license string. This
doesn't change the license of the files, but rather states the same
license in fewer words.
Also update the license years in some of the files.
Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
enetc: simplify the return expression of enetc_vf_set_mac_addr()
Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum_router: simplify the return expression of __mlxsw_sp_router_init()
Simplify the return expression.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This contains a single commit that fixes a bug that was introduced in
the last merge window. This bug causes a compiler warning complaining
about show_rcu_tasks_classic_gp_kthread() being an unused static
function in !SMP kernels.
The fix is straightforward, just adding an 'inline' to make this a
static inline function, thus avoiding the warning.
This bug was reported by Laurent Pinchart, who would like it fixed
sooner rather than later"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Prevent complaints of unused show_rcu_tasks_classic_gp_kthread()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- fix fault on page table writes during instruction fetch
s390:
- doc improvement
x86:
- The obvious patches are always the ones that turn out to be
completely broken. /me hangs his head in shame"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
Revert "KVM: Check the allocation of pv cpu mask"
KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite()
KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch
docs: kvm: add documentation for KVM_CAP_S390_DIAG318
Jan Kara [Mon, 21 Sep 2020 09:33:23 +0000 (11:33 +0200)]
dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy
implementation should be defined only in !CONFIG_DAX case, not in
!CONFIG_FS_DAX case.
Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: <stable@vger.kernel.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A previous commit unified how we handle prep for these two functions,
but this means that we check the allowed context (SQPOLL, specifically)
later than we should. Move the ring type checking into the two parent
functions, instead of doing it after we've done some setup work.
io_uring: mark statx/files_update/epoll_ctl as non-SQPOLL
These will naturally fail when attempted through SQPOLL, but either
with -EFAULT or -EBADF. Make it explicit that these are not workable
through SQPOLL and return -EINVAL, just like other ops that need to
use ->files.
Douglas Gilbert [Mon, 14 Sep 2020 21:36:09 +0000 (17:36 -0400)]
tools/io_uring: fix compile breakage
It would seem none of the kernel continuous integration does this:
$ cd tools/io_uring
$ make
Otherwise it may have noticed:
cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o
io_uring-bench.c
io_uring-bench.c:133:12: error: static declaration of ‘gettid’
follows non-static declaration
133 | static int gettid(void)
| ^~~~~~
In file included from /usr/include/unistd.h:1170,
from io_uring-bench.c:27:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note:
previous declaration of ‘gettid’ was here
34 | extern __pid_t gettid (void) __THROW;
| ^~~~~~
make: *** [<builtin>: io_uring-bench.o] Error 1
The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h
already defines gettid(). So prefix the local definition with
"lk_".
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring: don't use retry based buffered reads for non-async bdev
Some block devices, like dm, bubble back -EAGAIN through the completion
handler. We check for this in io_read(), but don't honor it for when
we have copied the iov. Return -EAGAIN for this case before retrying,
to force punt to io-wq.
Fixes: bcf5a06304d6 ("io_uring: support true async buffered reads, if file provides it") Reported-by: Zorro Lang <zlang@redhat.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring: don't re-setup vecs/iter in io_resumit_prep() is already there
If we already have mapped the necessary data for retry, then don't set
it up again. It's a pointless operation, and we leak the iovec if it's
a large (non-stack) vec.
Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources") Signed-off-by: Jens Axboe <axboe@kernel.dk>
can: rx-offload: can_rx_offload_add_manual(): add new initialization function
This patch adds a new initialization function:
can_rx_offload_add_manual()
It should be used to add support rx-offload to a driver, if the callback
mechanism should not be used. Use e.g. can_rx_offload_queue_sorted() to queue
skbs into rx-offload.
projects / kernel.git / log