mei: request autosuspend after sending rx flow control
A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.
4748ae7375c6 ("kgdb: fix gcc-11 warning on indentation") tried to fix up
the gcc-11 complaints in this file by just reformatting the #defines.
That worked for gcc 11.1.0, but in gcc 11.1.1 as shipped by Fedora 34,
the warning came back for one of the #defines.
Fix this up again by putting { } around the if statement, now it is
quiet again.
Fixes: 4748ae7375c6 ("kgdb: fix gcc-11 warning on indentation") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: https://lore.kernel.org/r/20210520130839.51987-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
video: hgafb: correctly handle card detect failure during probe
The return value of hga_card_detect() is not properly handled causing
the probe to succeed even though hga_card_detect() failed. Since probe
succeeds, hgafb_open() can be called which will end up operating on an
unmapped hga_vram. This results in an out-of-bounds access as reported
by kernel test robot [1].
To fix this, correctly detect failure of hga_card_detect() by checking
for a non-zero error code.
Merge tag 'soundwire-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus
soundwire fixes for v5.13
Fix in qcom driver for handling of qcom,ports-block-pack-mode property.
This fixes regression reported in DragonBoard DB845c and Lenovo Yoga
C630.
* tag 'soundwire-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: fix handling of qcom,ports-block-pack-mode
Linus Torvalds [Thu, 20 May 2021 16:31:52 +0000 (06:31 -1000)]
Merge tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
Linus Torvalds [Thu, 20 May 2021 16:20:15 +0000 (06:20 -1000)]
Merge tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fixes from Jan Kara:
"The most important part in the pull is disablement of the new syscall
quotactl_path() which was added in rc1.
The reason is some people at LWN discussion pointed out dirfd would be
useful for this path based syscall and Christian Brauner agreed.
Without dirfd it may be indeed problematic for containers. So let's
just disable the syscall for now when it doesn't have users yet so
that we have more time to mull over how to best specify the filesystem
we want to work on"
* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Disable quotactl_path syscall
quota: Use 'hlist_for_each_entry' to simplify code
Linus Torvalds [Wed, 19 May 2021 16:12:31 +0000 (06:12 -1000)]
Merge tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr fix from Christian Brauner:
"This makes an underlying idmapping assumption more explicit.
We currently don't have any filesystems that support idmapped mounts
which are mountable inside a user namespace, i.e. where s_user_ns !=
init_user_ns. That was a deliberate decision for now as userns root
can just mount the filesystem themselves.
Express this restriction explicitly and enforce it until there's a
real use-case for this. This way we can notice it and will have a
chance to adapt and audit our translation helpers and fstests
appropriately if we need to support such filesystems"
* tag 'fs.idmapped.mount_setattr.v5.13-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
fs/mount_setattr: tighten permission checks
It turns out this is not ready for primetime yet. The intentions are
good, but using remap_pfn_range() requires that there is nothing already
mapped in the area, and the i915 code seems to very much intentionally
remap the same area multiple times.
That will then just trigger the
BUG_ON(!pte_none(*pte));
in mm/memory.c: remap_pte_range().
There are also reports of mapping type inconsistencies, resulting in
warnings and in screen corruption.
Link: https://lore.kernel.org/lkml/20210519024322.GA29704@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/YKUjvoaKKggAmpIR@sf/ Link: https://lore.kernel.org/lkml/b6b61cf0-5874-f4c0-1fcc-4b3848451c31@redhat.com/ Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Kalle Valo <kvalo@codeaurora.org> Reported-by: Hans de Goede <hdegoede@redhat.com> Reported-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 17 May 2021 16:55:10 +0000 (09:55 -0700)]
Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix fiemap to print extents that could get misreported due to
internal extent splitting and logical merging for fiemap output
- fix RCU stalls during delayed iputs
- fix removed dentries still existing after log is synced"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix removed dentries still existing after log is synced
btrfs: return whole extents in fiemap
btrfs: avoid RCU stalls while running delayed iputs
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
Jan Kara [Mon, 17 May 2021 12:39:56 +0000 (14:39 +0200)]
quota: Disable quotactl_path syscall
In commit 4b30c0dc816a ("quota: wire up quotactl_path") we have wired up
new quotactl_path syscall. However some people in LWN discussion have
objected that the path based syscall is missing dirfd and flags argument
which is mostly standard for contemporary path based syscalls. Indeed
they have a point and after a discussion with Christian Brauner and
Sascha Hauer I've decided to disable the syscall for now and update its
API. Since there is no userspace currently using that syscall and it
hasn't been released in any major release, we should be fine.
Linus Torvalds [Sun, 16 May 2021 17:13:14 +0000 (10:13 -0700)]
Merge tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for driver core changes that happened in
5.13-rc1.
The clk driver fix resolves a many-reported issue with booting some
devices, and the USB typec fix resolves the reported problem of USB
systems on some embedded boards.
Both of these have been in linux-next this week with no reported
issues"
* tag 'driver-core-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
clk: Skip clk provider registration when np is NULL
usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
Linus Torvalds [Sun, 16 May 2021 16:55:05 +0000 (09:55 -0700)]
Merge tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.13-rc2. They consist of a number
of resolutions for reported issues:
- typec fixes for found problems
- xhci fixes and quirk additions
- dwc3 driver fixes
- minor fixes found by Coverity
- cdc-wdm fixes for reported problems
All of these have been in linux-next for a few days with no reported
issues"
* tag 'usb-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
usb: core: hub: fix race condition about TRSMRCY of resume
usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-default
xhci: Add reset resume quirk for AMD xhci controller.
usb: xhci: Increase timeout for HC halt
xhci: Do not use GFP_KERNEL in (potentially) atomic context
xhci: Fix giving back cancelled URBs even if halted endpoint can't reset
xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCI
usb: musb: Fix an error message
usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
usb: fotg210-hcd: Fix an error message
docs: usb: function: Modify path name
usb: dwc3: omap: improve extcon initialization
usb: typec: ucsi: Put fwnode in any case during ->probe()
usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
usb: dwc2: Remove obsolete MODULE_ constants from platform.c
usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
usb: dwc3: imx8mp: detect dwc3 core node via compatible string
usb: dwc3: gadget: Return success always for kick transfer in ep queue
...
Linus Torvalds [Sun, 16 May 2021 16:42:13 +0000 (09:42 -0700)]
Merge tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for timers:
- Use the ALARM feature check in the alarmtimer core code insted of
the old method of checking for the set_alarm() callback.
Drivers can have that callback set but the feature bit cleared. If
such a RTC device is selected then alarms wont work.
- Use a proper define to let the preprocessor check whether Hyper-V
VDSO clocksource should be active.
The code used a constant in an enum with #ifdef, which evaluates to
always false and disabled the clocksource for VDSO"
* tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
alarmtimer: Check RTC features instead of ops
Linus Torvalds [Sun, 16 May 2021 16:39:04 +0000 (09:39 -0700)]
Merge tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two patches for error path fixes
- a small series for fixing a regression with swiotlb with Xen on Arm
* tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/swiotlb: check if the swiotlb has already been initialized
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h
xen/unpopulated-alloc: fix error return code in fill_list()
xen/gntdev: fix gntdev_mmap() error exit path
Linus Torvalds [Sun, 16 May 2021 16:31:06 +0000 (09:31 -0700)]
Merge tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The three SEV commits are not really urgent material. But we figured
since getting them in now will avoid a huge amount of conflicts
between future SEV changes touching tip, the kvm and probably other
trees, sending them to you now would be best.
The idea is that the tip, kvm etc branches for 5.14 will all base
ontop of -rc2 and thus everything will be peachy. What is more, those
changes are purely mechanical and defines movement so they should be
fine to go now (famous last words).
Summary:
- Enable -Wundef for the compressed kernel build stage
- Reorganize SEV code to streamline and simplify future development"
* tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/compressed: Enable -Wundef
x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG
x86/sev: Move GHCB MSR protocol and NAE definitions in a common header
x86/sev-es: Rename sev-es.{ch} to sev.{ch}
Linus Torvalds [Sat, 15 May 2021 17:24:48 +0000 (10:24 -0700)]
Merge tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix an idle CPU selection bug, and an AMD Ryzen maximum frequency
enumeration bug"
* tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations
sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()
Linus Torvalds [Sat, 15 May 2021 16:42:27 +0000 (09:42 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: resource, squashfs, hfsplus,
modprobe, and mm (hugetlb, slub, userfaultfd, ksm, pagealloc, kasan,
pagemap, and ioremap)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/ioremap: fix iomap_max_page_shift
docs: admin-guide: update description for kernel.modprobe sysctl
hfsplus: prevent corruption in shrinking truncate
mm/filemap: fix readahead return types
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
mm: fix struct page layout on 32-bit systems
ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()"
userfaultfd: release page in error path to avoid BUG_ON
squashfs: fix divide error in calculate_skip()
kernel/resource: fix return code check in __request_free_mem_region
mm, slub: move slub_debug static key enabling outside slab_mutex
mm/hugetlb: fix cow where page writtable in child
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Linus Torvalds [Sat, 15 May 2021 16:01:45 +0000 (09:01 -0700)]
Merge tag 'arc-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- PAE fixes
- syscall num check off-by-one bug
- misc fixes
* tag 'arc-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: mm: Use max_high_pfn as a HIGHMEM zone border
ARC: mm: PAE: use 40-bit physical page mask
ARC: entry: fix off-by-one error in syscall number validation
ARC: kgdb: add 'fallthrough' to prevent a warning
arc: Fix typos/spellos
Linus Torvalds [Sat, 15 May 2021 15:52:30 +0000 (08:52 -0700)]
Merge tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for shared tag set exit (Bart)
- Correct ioctl range for zoned ioctls (Damien)
- Removed dead/unused function (Lin)
- Fix perf regression for shared tags (Ming)
- Fix out-of-bounds issue with kyber and preemption (Omar)
- BFQ merge fix (Paolo)
- Two error handling fixes for nbd (Sun)
- Fix weight update in blk-iocost (Tejun)
- NVMe pull request (Christoph):
- correct the check for using the inline bio in nvmet (Chaitanya
Kulkarni)
- demote unsupported command warnings (Chaitanya Kulkarni)
- fix corruption due to double initializing ANA state (me, Hou Pu)
- reset ns->file when open fails (Daniel Wagner)
- fix a NULL deref when SEND is completed with error in nvmet-rdma
(Michal Kalderon)
- Fix kernel-doc warning (Bart)
* tag 'block-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
block/partitions/efi.c: Fix the efi_partition() kernel-doc header
blk-mq: Swap two calls in blk_mq_exit_queue()
blk-mq: plug request for shared sbitmap
nvmet: use new ana_log_size instead the old one
nvmet: seset ns->file when open fails
nbd: share nbd_put and return by goto put_nbd
nbd: Fix NULL pointer in flush_workqueue
blkdev.h: remove unused codes blk_account_rq
block, bfq: avoid circular stable merges
blk-iocost: fix weight updates of inner active iocgs
nvmet: demote fabrics cmd parse err msg to debug
nvmet: use helper to remove the duplicate code
nvmet: demote discovery cmd parse err msg to debug
nvmet-rdma: Fix NULL deref when SEND is completed with error
nvmet: fix inline bio check for passthru
nvmet: fix inline bio check for bdev-ns
nvme-multipath: fix double initialization of ANA state
kyber: fix out of bounds access when preempted
block: uapi: fix comment about block device ioctl
Linus Torvalds [Sat, 15 May 2021 15:43:44 +0000 (08:43 -0700)]
Merge tag 'io_uring-5.13-2021-05-14' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Just a few minor fixes/changes:
- Fix issue with double free race for linked timeout completions
- Fix reference issue with timeouts
- Remove last few places that make SQPOLL special, since it's just an
io thread now.
- Bump maximum allowed registered buffers, as we don't allocate as
much anymore"
* tag 'io_uring-5.13-2021-05-14' of git://git.kernel.dk/linux-block:
io_uring: increase max number of reg buffers
io_uring: further remove sqpoll limits on opcodes
io_uring: fix ltout double free on completion race
io_uring: fix link timeout refs
Linus Torvalds [Sat, 15 May 2021 15:37:21 +0000 (08:37 -0700)]
Merge tag 'erofs-for-5.13-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"This mainly fixes 1 lcluster-sized pclusters for the big pcluster
feature, which can be forcely generated by mkfs as a specific on-disk
case for per-(sub)file compression strategies but missed to handle in
runtime properly.
Also, documentation updates are included to fix the broken
illustration due to the ReST conversion by accident and complete the
big pcluster introduction.
Summary:
- update documentation to fix the broken illustration due to ReST
conversion by accident at that time and complete the big pcluster
introduction
- fix 1 lcluster-sized pclusters for the big pcluster feature"
* tag 'erofs-for-5.13-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix 1 lcluster-sized pcluster for big pcluster
erofs: update documentation about data compression
erofs: fix broken illustration in documentation
Linus Torvalds [Sat, 15 May 2021 15:32:51 +0000 (08:32 -0700)]
Merge tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix for a bootup crash condition introduced in this merge
window and some other minor fixups:
- Fix regression in ACPI NFIT table handling leading to crashes and
driver load failures.
- Move the nvdimm mailing list
- Miscellaneous minor fixups"
* tag 'libnvdimm-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: NFIT: Fix support for variable 'SPA' structure size
MAINTAINERS: Move nvdimm mailing list
tools/testing/nvdimm: Make symbol '__nfit_test_ioremap' static
libnvdimm: Remove duplicate struct declaration
Linus Torvalds [Sat, 15 May 2021 15:28:08 +0000 (08:28 -0700)]
Merge tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A fix for a hang condition due to missed wakeups in the filesystem-dax
core when exercised by virtiofs.
This bug has been there from the beginning, but the condition has
not triggered on other filesystems since they hold a lock over
invalidation events"
* tag 'dax-fixes-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Wake up all waiters after invalidating dax entry
dax: Add a wakeup mode parameter to put_unlocked_entry()
dax: Add an enum for specifying dax wakup mode
Linus Torvalds [Sat, 15 May 2021 15:18:29 +0000 (08:18 -0700)]
Merge tag 'drm-fixes-2021-05-15' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"Looks like I wasn't the only one not fully switched on this week. The
msm pull has a missing tag so I missed it, and i915 team were a bit
late. In my defence I did have a day with the roof of my home office
removed, so was sitting at my kids desk.
i915:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check"
* tag 'drm-fixes-2021-05-15' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Use correct downstream caps for check Src-Ctl mode for PCON
drm/i915/overlay: Fix active retire callback alignment
drm/i915: Fix crash in auto_retire
drm/i915/gt: Fix a double free in gen8_preallocate_top_level_pdp
drm/i915: Read C0DRB3/C1DRB3 as 16 bits again
drm/i915: Avoid div-by-zero on gen2
drm/i915/dp: Use slow and wide link training for everything
drm/msm/dp: initialize audio_comp when audio starts
drm/msm/dp: check sink_count before update is_connected status
drm/msm: fix minor version to indicate MSM_PARAM_SUSPENDS support
drm/msm/dsi: fix msm_dsi_phy_get_clk_provider return code
drm/msm/dsi: dsi_phy_28nm_8960: fix uninitialized variable access
drm/msm: fix LLC not being enabled for mmu500 targets
drm/msm: Do not unpin/evict exported dma-buf's
syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.
Christophe Leroy [Sat, 15 May 2021 00:27:39 +0000 (17:27 -0700)]
mm/ioremap: fix iomap_max_page_shift
iomap_max_page_shift is expected to contain a page shift, so it can't be a
'bool', has to be an 'unsigned int'
And fix the default values: P4D_SHIFT is when huge iomap is allowed.
However, on some architectures (eg: powerpc book3s/64), P4D_SHIFT is not a
constant so it can't be used to initialise a static variable. So,
initialise iomap_max_page_shift with a maximum shift supported by the
architecture, it is gated by P4D_SHIFT in vmap_try_huge_p4d() anyway.
Link: https://lkml.kernel.org/r/ad2d366015794a9f21320dcbdd0a8eb98979e9df.1620898113.git.christophe.leroy@csgroup.eu Fixes: b9fa45504548 ("mm: HUGE_VMAP arch support cleanup") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus Villemoes [Sat, 15 May 2021 00:27:36 +0000 (17:27 -0700)]
docs: admin-guide: update description for kernel.modprobe sysctl
When I added CONFIG_MODPROBE_PATH, I neglected to update Documentation/.
It's still true that this defaults to /sbin/modprobe, but now via a level
of indirection. So document that the kernel might have been built with
something other than /sbin/modprobe as the initial value.
Jouni Roivas [Sat, 15 May 2021 00:27:33 +0000 (17:27 -0700)]
hfsplus: prevent corruption in shrinking truncate
I believe there are some issues introduced by commit a88dc9f0615d
("hfsplus: avoid deadlock on file truncation")
HFS+ has extent records which always contains 8 extents. In case the
first extent record in catalog file gets full, new ones are allocated from
extents overflow file.
In case shrinking truncate happens to middle of an extent record which
locates in extents overflow file, the logic in hfsplus_file_truncate() was
changed so that call to hfs_brec_remove() is not guarded any more.
Right action would be just freeing the extents that exceed the new size
inside extent record by calling hfsplus_free_extents(), and then check if
the whole extent record should be removed. However since the guard
(blk_cnt > start) is now after the call to hfs_brec_remove(), this has
unfortunate effect that the last matching extent record is removed
unconditionally.
To reproduce this issue, create a file which has at least 10 extents, and
then perform shrinking truncate into middle of the last extent record, so
that the number of remaining extents is not under or divisible by 8. This
causes the last extent record (8 extents) to be removed totally instead of
truncating into middle of it. Thus this causes corruption, and lost data.
Fix for this is simply checking if the new truncated end is below the
start of this extent record, making it safe to remove the full extent
record. However call to hfs_brec_remove() can't be moved to it's previous
place since we're dropping ->tree_lock and it can cause a race condition
and the cached info being invalidated possibly corrupting the node data.
Another issue is related to this one. When entering into the block
(blk_cnt > start) we are not holding the ->tree_lock. We break out from
the loop not holding the lock, but hfs_find_exit() does unlock it. Not
sure if it's possible for someone else to take the lock under our feet,
but it can cause hard to debug errors and premature unlocking. Even if
there's no real risk of it, the locking should still always be kept in
balance. Thus taking the lock now just before the check.
A readahead request will not allocate more memory than can be represented
by a size_t, even on systems that have HIGHMEM available. Change the
length functions from returning an loff_t to a size_t.
Link: https://lkml.kernel.org/r/20210510201201.1558972-1-willy@infradead.org Fixes: 2fc26381224f60 ("btrfs: add and use readahead_batch_length") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasan: fix unit tests with CONFIG_UBSAN_LOCAL_BOUNDS enabled
These tests deliberately access these arrays out of bounds, which will
cause the dynamic local bounds checks inserted by
CONFIG_UBSAN_LOCAL_BOUNDS to fail and panic the kernel. To avoid this
problem, access the arrays via volatile pointers, which will prevent the
compiler from being able to determine the array bounds.
These accesses use volatile pointers to char (char *volatile) rather than
the more conventional pointers to volatile char (volatile char *) because
we want to prevent the compiler from making inferences about the pointer
itself (i.e. its array bounds), not the data that it refers to.
Link: https://lkml.kernel.org/r/20210507025915.1464056-1-pcc@google.com Link: https://linux-review.googlesource.com/id/I90b1713fbfa1bf68ff895aef099ea77b98a7c3b9 Signed-off-by: Peter Collingbourne <pcc@google.com> Tested-by: Alexander Potapenko <glider@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Peter Collingbourne <pcc@google.com> Cc: George Popescu <georgepope@android.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Hugh Dickins [Sat, 15 May 2021 00:27:22 +0000 (17:27 -0700)]
ksm: revert "use GET_KSM_PAGE_NOLOCK to get ksm page in remove_rmap_item_from_tree()"
This reverts commit 3057d8b41693b4f30e5e055bcedd178844c2d260. General
Protection Fault in rmap_walk_ksm() under memory pressure:
remove_rmap_item_from_tree() needs to take page lock, of course.
Axel Rasmussen [Sat, 15 May 2021 00:27:19 +0000 (17:27 -0700)]
userfaultfd: release page in error path to avoid BUG_ON
Consider the following sequence of events:
1. Userspace issues a UFFD ioctl, which ends up calling into
shmem_mfill_atomic_pte(). We successfully account the blocks, we
shmem_alloc_page(), but then the copy_from_user() fails. We return
-ENOENT. We don't release the page we allocated.
2. Our caller detects this error code, tries the copy_from_user() after
dropping the mmap_lock, and retries, calling back into
shmem_mfill_atomic_pte().
3. Meanwhile, let's say another process filled up the tmpfs being used.
4. So shmem_mfill_atomic_pte() fails to account blocks this time, and
immediately returns - without releasing the page.
This triggers a BUG_ON in our caller, which asserts that the page
should always be consumed, unless -ENOENT is returned.
To fix this, detect if we have such a "dangling" page when accounting
fails, and if so, release it before returning.
Link: https://lkml.kernel.org/r/20210428230858.348400-1-axelrasmussen@google.com Fixes: 5e337a9e225f ("userfaultfd: shmem: avoid leaking blocks and used blocks in UFFDIO_COPY") Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reported-by: Hugh Dickins <hughd@google.com> Acked-by: Hugh Dickins <hughd@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Phillip Lougher [Sat, 15 May 2021 00:27:16 +0000 (17:27 -0700)]
squashfs: fix divide error in calculate_skip()
Sysbot has reported a "divide error" which has been identified as being
caused by a corrupted file_size value within the file inode. This value
has been corrupted to a much larger value than expected.
Calculate_skip() is passed i_size_read(inode) >> msblk->block_log. Due to
the file_size value corruption this overflows the int argument/variable in
that function, leading to the divide error.
This patch changes the function to use u64. This will accommodate any
unexpectedly large values due to corruption.
The value returned from calculate_skip() is clamped to be never more than
SQUASHFS_CACHED_BLKS - 1, or 7. So file_size corruption does not lead to
an unexpectedly large return result here.
Alistair Popple [Sat, 15 May 2021 00:27:13 +0000 (17:27 -0700)]
kernel/resource: fix return code check in __request_free_mem_region
Splitting an earlier version of a patch that allowed calling
__request_region() while holding the resource lock into a series of
patches required changing the return code for the newly introduced
__request_region_locked().
Unfortunately this change was not carried through to a subsequent commit 86b0e53b8317 ("kernel/resource: fix locking in request_free_mem_region")
in the series. This resulted in a use-after-free due to freeing the
struct resource without properly releasing it. Fix this by correcting the
return code check so that the struct is not freed if the request to add it
was successful.
Link: https://lkml.kernel.org/r/20210512073528.22334-1-apopple@nvidia.com Fixes: 86b0e53b8317 ("kernel/resource: fix locking in request_free_mem_region") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reported-by: kernel test robot <oliver.sang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Muchun Song <smuchun@gmail.com> Cc: Oliver Sang <oliver.sang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Sat, 15 May 2021 00:27:10 +0000 (17:27 -0700)]
mm, slub: move slub_debug static key enabling outside slab_mutex
Paul E. McKenney reported [1] that commit 3c3e5bc3584d ("mm, slub: enable
slub_debug static key when creating cache with explicit debug flags")
results in the lockdep complaint:
======================================================
WARNING: possible circular locking dependency detected
5.12.0+ #15 Not tainted
------------------------------------------------------
rcu_torture_sta/109 is trying to acquire lock: ffffffff96063cd0 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0x9/0x20
but task is already holding lock: ffffffff96173c28 (slab_mutex){+.+.}-{3:3}, at: kmem_cache_create_usercopy+0x2d/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
This is because there's one order of locking from the hotplug callbacks:
lock(cpu_hotplug_lock); // from hotplug machinery itself
lock(slab_mutex); // in e.g. slab_mem_going_offline_callback()
And commit 3c3e5bc3584d made the reverse sequence possible:
lock(slab_mutex); // in kmem_cache_create_usercopy()
lock(cpu_hotplug_lock); // kmem_cache_open() -> static_key_enable()
The simplest fix is to move static_key_enable() to a place before slab_mutex is
taken. That means kmem_cache_create_usercopy() in mm/slab_common.c which is not
ideal for SLUB-specific code, but the #ifdef CONFIG_SLUB_DEBUG makes it
at least self-contained and obvious.
Link: https://lkml.kernel.org/r/20210504120019.26791-1-vbabka@suse.cz Fixes: 3c3e5bc3584d ("mm, slub: enable slub_debug static key when creating cache with explicit debug flags") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Sat, 15 May 2021 00:27:07 +0000 (17:27 -0700)]
mm/hugetlb: fix cow where page writtable in child
When rework early cow of pinned hugetlb pages, we moved huge_ptep_get()
upper but overlooked a side effect that the huge_ptep_get() will fetch the
pte after wr-protection. After moving it upwards, we need explicit
wr-protect of child pte or we will keep the write bit set in the child
process, which could cause data corrution where the child can write to the
original page directly.
This issue can also be exposed by "memfd_test hugetlbfs" kselftest.
Link: https://lkml.kernel.org/r/20210503234356.9097-3-peterx@redhat.com Fixes: 531a8f44d6100 ("hugetlb: do early cow when page pinned on src mm") Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Xu [Sat, 15 May 2021 00:27:04 +0000 (17:27 -0700)]
mm/hugetlb: fix F_SEAL_FUTURE_WRITE
Patch series "mm/hugetlb: Fix issues on file sealing and fork", v2.
Hugh reported issue with F_SEAL_FUTURE_WRITE not applied correctly to
hugetlbfs, which I can easily verify using the memfd_test program, which
seems that the program is hardly run with hugetlbfs pages (as by default
shmem).
Meanwhile I found another probably even more severe issue on that hugetlb
fork won't wr-protect child cow pages, so child can potentially write to
parent private pages. Patch 2 addresses that.
After this series applied, "memfd_test hugetlbfs" should start to pass.
This patch (of 2):
F_SEAL_FUTURE_WRITE is missing for hugetlb starting from the first day.
There is a test program for that and it fails constantly.
Linus Torvalds [Fri, 14 May 2021 20:44:51 +0000 (13:44 -0700)]
Merge tag 'trace-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix trace_check_vprintf() for %.*s
The sanity check of all strings being read from the ring buffer to
make sure they are in safe memory space did not account for the %.*s
notation having another parameter to process (the length).
Add that to the check"
* tag 'trace-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Handle %.*s in trace_check_vprintf()
Dave Airlie [Fri, 14 May 2021 20:12:45 +0000 (06:12 +1000)]
Merge tag 'drm-intel-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc2:
- Fix active callback alignment annotations and subsequent crashes
- Retract link training strategy to slow and wide, again
- Avoid division by zero on gen2
- Use correct width reads for C0DRB3/C1DRB3 registers
- Fix double free in pdp allocation failure path
- Fix HDMI 2.1 PCON downstream caps check
Linus Torvalds [Fri, 14 May 2021 17:52:47 +0000 (10:52 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fixes and cpucaps.h automatic generation:
- Generate cpucaps.h at build time rather than carrying lots of
#defines. Merged at -rc1 to avoid some conflicts during the merge
window.
- Initialise RGSR_EL1.SEED in __cpu_setup() as it may be left as 0
out of reset and the IRG instruction would not function as expected
if only the architected pseudorandom number generator is
implemented.
- Fix potential race condition in __sync_icache_dcache() where the
PG_dcache_clean page flag is set before the actual cache
maintenance.
- Fix header include in BTI kselftests"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
arm64: tools: Add __ASM_CPUCAPS_H to the endif in cpucaps.h
arm64: mte: initialize RGSR_EL1.SEED in __cpu_setup
kselftest/arm64: Add missing stddef.h include to BTI tests
arm64: Generate cpucaps.h
Linus Torvalds [Fri, 14 May 2021 17:49:20 +0000 (10:49 -0700)]
Merge tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"This fixes some critical bugs such as memory leak in compression
flows, kernel panic when handling errors, and swapon failure due to
newly added condition check"
* tag 'f2fs-5.13-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: return EINVAL for hole cases in swap file
f2fs: avoid swapon failure by giving a warning first
f2fs: compress: fix to assign cc.cluster_idx correctly
f2fs: compress: fix race condition of overwrite vs truncate
f2fs: compress: fix to free compress page correctly
f2fs: support iflag change given the mask
f2fs: avoid null pointer access when handling IPU error
radeon:
- Fixes for flexible array conversions
- Fix for flickering on Oland with multiple 4K displays
vc4:
- drop unused function"
* tag 'drm-fixes-2021-05-14' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: update vcn1.0 Non-DPG suspend sequence
drm/amdgpu: set vcn mgcg flag for picasso
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
drm/amdgpu: update the method for harvest IP for specific SKU
drm/amdgpu: add judgement when add ip blocks (v2)
drm/amd/display: Initialize attribute for hdcp_srm sysfs file
drm/amd/pm: Fix out-of-bounds bug
drm/radeon/si_dpm: Fix SMU power state load
drm/radeon/ni_dpm: Fix booting bug
MAINTAINERS: Update address for Emma Anholt
MAINTAINERS: Update my e-mail
drm/vc4: remove unused function
drm/ttm: Do not add non-system domain BO into swap list
Catalin Marinas [Fri, 14 May 2021 09:50:01 +0000 (10:50 +0100)]
arm64: Fix race condition on PG_dcache_clean in __sync_icache_dcache()
To ensure that instructions are observable in a new mapping, the arm64
set_pte_at() implementation cleans the D-cache and invalidates the
I-cache to the PoU. As an optimisation, this is only done on executable
mappings and the PG_dcache_clean page flag is set to avoid future cache
maintenance on the same page.
When two different processes map the same page (e.g. private executable
file or shared mapping) there's a potential race on checking and setting
PG_dcache_clean via set_pte_at() -> __sync_icache_dcache(). While on the
fault paths the page is locked (PG_locked), mprotect() does not take the
page lock. The result is that one process may see the PG_dcache_clean
flag set but the I/D cache maintenance not yet performed.
Avoid test_and_set_bit(PG_dcache_clean) in favour of separate test_bit()
and set_bit(). In the rare event of a race, the cache maintenance is
done twice.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Steven Price <steven.price@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210514095001.13236-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Bart Van Assche [Thu, 13 May 2021 17:15:29 +0000 (10:15 -0700)]
blk-mq: Swap two calls in blk_mq_exit_queue()
If a tag set is shared across request queues (e.g. SCSI LUNs) then the
block layer core keeps track of the number of active request queues in
tags->active_queues. blk_mq_tag_busy() and blk_mq_tag_idle() update that
atomic counter if the hctx flag BLK_MQ_F_TAG_QUEUE_SHARED is set. Make
sure that blk_mq_exit_queue() calls blk_mq_tag_idle() before that flag is
cleared by blk_mq_del_queue_tag_set().
Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Fixes: cfa670be5cd2 ("blk-mq: improve support for shared tags maps") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210513171529.7977-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Fri, 14 May 2021 02:20:52 +0000 (10:20 +0800)]
blk-mq: plug request for shared sbitmap
In case of shared sbitmap, request won't be held in plug list any more
sine commit 99a8dd3f1c35 ("blk-mq: Facilitate a shared sbitmap per
tagset"), this way makes request merge from flush plug list & batching
submission not possible, so cause performance regression.
Yanhui reports performance regression when running sequential IO
test(libaio, 16 jobs, 8 depth for each job) in VM, and the VM disk
is emulated with image stored on xfs/megaraid_sas.
Fix the issue by recovering original behavior to allow to hold request
in plug list.
Cc: Yanhui Ma <yama@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: kashyap.desai@broadcom.com Fixes: 99a8dd3f1c35 ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20210514022052.1047665-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
xen/swiotlb: check if the swiotlb has already been initialized
xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with
-ENOMEM if the swiotlb has already been initialized.
Add an explicit check io_tlb_default_mem != NULL at the beginning of
xen_swiotlb_init. If the swiotlb is already initialized print a warning
and return -EEXIST.
On x86, the error propagates.
On ARM, we don't actually need a special swiotlb buffer (yet), any
buffer would do. So ignore the error and continue.
arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required
Although SWIOTLB_NO_FORCE is meant to allow later calls to swiotlb_init,
today dma_direct_map_page returns error if SWIOTLB_NO_FORCE.
For now, without a larger overhaul of SWIOTLB_NO_FORCE, the best we can
do is to avoid setting SWIOTLB_NO_FORCE in mem_init when we know that it
is going to be required later (e.g. Xen requires it).
Vitaly Kuznetsov [Thu, 13 May 2021 07:32:46 +0000 (09:32 +0200)]
clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029)
the commit bccc999ea88e ("clocksource/drivers/hyper-v: Handle vDSO
differences inline") broke vDSO on x86. The problem appears to be that
VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and
'#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not
a define).
Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead.
Fixes: bccc999ea88e ("clocksource/drivers/hyper-v: Handle vDSO differences inline") Reported-by: Mohammed Gamal <mgamal@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
Pavel Begunkov [Fri, 14 May 2021 11:06:44 +0000 (12:06 +0100)]
io_uring: increase max number of reg buffers
Since recent changes instead of storing a large array of struct
io_mapped_ubuf, we store pointers to them, that is 4 times slimmer and
we should not to so worry about restricting max number of registererd
buffer slots, increase the limit 4 times.
Pavel Begunkov [Fri, 14 May 2021 11:05:46 +0000 (12:05 +0100)]
io_uring: further remove sqpoll limits on opcodes
There are three types of requests that left disabled for sqpoll, namely
epoll ctx, statx, and resources update. Since SQPOLL task is now closely
mimics a userspace thread, remove the restrictions.
Pavel Begunkov [Fri, 14 May 2021 11:02:50 +0000 (12:02 +0100)]
io_uring: fix ltout double free on completion race
Always remove linked timeout on io_link_timeout_fn() from the master
request link list, otherwise we may get use-after-free when first
io_link_timeout_fn() puts linked timeout in the fail path, and then
will be found and put on master's free.
Hsin-Yi Wang [Tue, 20 Apr 2021 13:30:50 +0000 (21:30 +0800)]
misc: eeprom: at24: check suspend status before disable regulator
47f4d15e3435 ("misc: eeprom: at24: support pm_runtime control") disables
regulator in runtime suspend. If runtime suspend is called before
regulator disable, it will results in regulator unbalanced disabling.
uio_hv_generic: Fix a memory leak in error handling paths
If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be
updated and 'hv_uio_cleanup()' in the error handling path will not be
able to free the corresponding buffer.
In such a case, we need to free the buffer explicitly.
Martin Ågren [Thu, 22 Apr 2021 19:22:40 +0000 (21:22 +0200)]
uio/uio_pci_generic: fix return value changed in refactoring
Commit d9ee43c952f9 ("uio/uio_pci_generic: use device-managed function
equivalents") was able to simplify various error paths thanks to no
longer having to clean up on the way out. Some error paths were dropped,
others were simplified. In one of those simplifications, the return
value was accidentally changed from -ENODEV to -ENOMEM. Restore the old
return value.
Fixes: d9ee43c952f9 ("uio/uio_pci_generic: use device-managed function equivalents") Cc: stable <stable@vger.kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Link: https://lore.kernel.org/r/20210422192240.1136373-1-martin.agren@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Fri, 14 May 2021 04:40:08 +0000 (14:40 +1000)]
powerpc/64e/interrupt: Fix nvgprs being clobbered
Some interrupt handlers have an "extra" that saves 1 or 2
registers (r14, r15) in the paca save area and makes them available to
use by the handler.
The change to always save nvgprs in exception handlers lead to some
interrupt handlers saving those scratch r14 / r15 registers into the
interrupt frame's GPR saves, which get restored on interrupt exit.
Fix this by always reloading those scratch registers from paca before
the EXCEPTION_COMMON that saves nvgprs.
Fixes: 3f27476060b0 ("powerpc/64e/interrupt: always save nvgprs on interrupt") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
Nicholas Piggin [Mon, 3 May 2021 11:17:08 +0000 (21:17 +1000)]
powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled
scv support introduced the notion of code that implicitly soft-masks
irqs due to the instruction addresses. This is required because scv
enters the kernel with MSR[EE]=1.
If a NMI (including soft-NMI) interrupt hits when we are implicitly
soft-masked then its regs->softe does not reflect this because it is
derived from the explicit soft mask state (paca->irq_soft_mask). This
makes arch_irq_disabled_regs(regs) return false.
This can trigger a warning in the soft-NMI watchdog code (shown below).
Fix it by having NMI interrupts set regs->softe to disabled in case of
interrupting an implicit soft-masked region.
The stf entry barrier fallback is unsafe to execute in a semi-patched
state, which can happen when enabling/disabling the mitigation with
strict kernel RWX enabled and using the hash MMU.
See the previous commit for more details.
Fix it by changing the order in which we patch the instructions.
Note the stf barrier fallback is only used on Power6 or earlier.
The entry flush mitigation can be enabled/disabled at runtime. When this
happens it results in the kernel patching its own instructions to
enable/disable the mitigation sequence.
With strict kernel RWX enabled instruction patching happens via a
secondary mapping of the kernel text, so that we don't have to make the
primary mapping writable. With the hash MMU this leads to a hash fault,
which causes us to execute the exception entry which contains the entry
flush mitigation.
This means we end up executing the entry flush in a semi-patched state,
ie. after we have patched the first instruction but before we patch the
second or third instruction of the sequence.
On machines with updated firmware the entry flush is a series of special
nops, and it's safe to to execute in a semi-patched state.
However when using the fallback flush the sequence is mflr/branch/mtlr,
and so it's not safe to execute if we have patched out the mflr but not
the other two instructions. Doing so leads to us corrputing LR, leading
to an oops, for example:
The simplest fix is to change the order in which we patch the
instructions, so that the sequence is always safe to execute. For the
non-fallback flushes it doesn't matter what order we patch in.
powerpc/64s: Fix crashes when toggling entry flush barrier
The entry flush mitigation can be enabled/disabled at runtime via a
debugfs file (entry_flush), which causes the kernel to patch itself to
enable/disable the relevant mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
Shows that we returned to userspace with a corrupted LR that points into
the kernel, due to executing the partially patched call to the fallback
entry flush (ie. we missed the LR restore).
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
powerpc/64s: Fix crashes when toggling stf barrier
The STF (store-to-load forwarding) barrier mitigation can be
enabled/disabled at runtime via a debugfs file (stf_barrier), which
causes the kernel to patch itself to enable/disable the relevant
mitigations.
However depending on which mitigation we're using, it may not be safe to
do that patching while other CPUs are active. For example the following
crash:
Shows that we returned to userspace without restoring the user r13
value, due to executing the partially patched STF exit code.
Fix it by doing the patching under stop machine. The CPUs that aren't
doing the patching will be spinning in the core of the stop machine
logic. That is currently sufficient for our purposes, because none of
the patching we do is to that code or anywhere in the vicinity.
Filipe Manana [Wed, 12 May 2021 15:27:16 +0000 (16:27 +0100)]
btrfs: fix removed dentries still existing after log is synced
When we move one inode from one directory to another and both the inode
and its previous parent directory were logged before, we are not supposed
to have the dentry for the old parent if we have a power failure after the
log is synced. Only the new dentry is supposed to exist.
Generally this works correctly, however there is a scenario where this is
not currently working, because the old parent of the file/directory that
was moved is not authoritative for a range that includes the dir index and
dir item keys of the old dentry. This case is better explained with the
following example and reproducer:
# The test requires a very specific layout of keys and items in the
# fs/subvolume btree to trigger the bug. So we want to make sure that
# on whatever platform we are, we have the same leaf/node size.
#
# Currently in btrfs the node/leaf size can not be smaller than the page
# size (but it can be greater than the page size). So use the largest
# supported node/leaf size (64K).
$ mkfs.btrfs -f -n 65536 /dev/sdc
$ mount /dev/sdc /mnt
# Create several empty files to have the directory "testdir" with its
# items spread over several leaves (7 in this case).
$ for ((i = 1; i <= 1200; i++)); do
echo -n > /mnt/testdir/file$i
done
# Create our test directory "dira", inode number 1458, which gets all
# its items in leaf 7.
#
# The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to
# the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY
# item that points to that entry is in leaf 3.
#
# For this particular filesystem node size (64K), file count and file
# names, we endup with the directory entry items from inode 257 in
# leaves 2 and 3, as previously mentioned - what matters for triggering
# the bug exercised by this test case is that those items are not placed
# in leaf 1, they must be placed in a leaf different from the one
# containing the inode item for inode 257.
#
# The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for
# the parent inode (257) are the following:
#
# item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
#
# and:
#
# item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34
# location key (1458 INODE_ITEM 0) type DIR
# transid 6 data_len 0 name_len 4
# name: dira
$ mkdir /mnt/testdir/dira
# Make sure everything done so far is durably persisted.
$ sync
# Now do a change to inode 257 ("testdir") that does not result in
# COWing leaves 2 and 3 - the leaves that contain the directory items
# pointing to inode 1458 (directory "dira").
#
# Changing permissions, the owner/group, updating or adding a xattr,
# etc, will not change (COW) leaves 2 and 3. So for the sake of
# simplicity change the permissions of inode 257, which results in
# updating its inode item and therefore change (COW) only leaf 1.
$ chmod 700 /mnt/testdir
# Now fsync directory inode 257.
#
# Since only the first leaf was changed/COWed, we log the inode item of
# inode 257 and only the dentries found in the first leaf, all have a
# key type of BTRFS_DIR_ITEM_KEY, and no keys of type
# BTRFS_DIR_INDEX_KEY, because they sort after the former type and none
# exist in the first leaf.
#
# We also log 3 items that represent ranges for dir items and dir
# indexes for which the log is authoritative:
#
# 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [0, 2285968570] (the offset here is the crc32c of the
# dentry's name). The value 2285968570 corresponds to the offset of
# the first key of leaf 2 (which is of type BTRFS_DIR_ITEM_KEY);
#
# 2) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is
# authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset
# in the range [4293818216, (u64)-1] (the offset here is the crc32c
# of the dentry's name). The value 4293818216 corresponds to the
# offset of the highest key of type BTRFS_DIR_ITEM_KEY plus 1
# (4293818215 + 1), which is located in leaf 2;
#
# 3) a key of type BTRFS_DIR_LOG_INDEX_KEY, with an offset of 1203,
# which indicates the log is authoritative for all keys of type
# BTRFS_DIR_INDEX_KEY that have an offset in the range
# [1203, (u64)-1]. The value 1203 corresponds to the offset of the
# last key of type BTRFS_DIR_INDEX_KEY plus 1 (1202 + 1), which is
# located in leaf 3;
#
# Also, because "testdir" is a directory and inode 1458 ("dira") is a
# child directory, we log inode 1458 too.
$ xfs_io -c "fsync" /mnt/testdir
# Now move "dira", inode 1458, to be a child of the root directory
# (inode 256).
#
# Because this inode was previously logged, when "testdir" was fsynced,
# the log is updated so that the old inode reference, referring to inode
# 257 as the parent, is deleted and the new inode reference, referring
# to inode 256 as the parent, is added to the log.
$ mv /mnt/testdir/dira /mnt
# Now change some file and fsync it. This guarantees the log changes
# made by the previous move/rename operation are persisted. We do not
# need to do any special modification to the file, just any change to
# any file and sync the log.
# Simulate a power failure and then mount again the filesystem to
# replay the log tree. We want to verify that we are able to mount the
# filesystem, meaning log replay was successful, and that directory
# inode 1458 ("dira") only has inode 256 (the filesystem's root) as
# its parent (and no longer a child of inode 257).
#
# It used to happen that during log replay we would end up having
# inode 1458 (directory "dira") with 2 hard links, being a child of
# inode 257 ("testdir") and inode 256 (the filesystem's root). This
# resulted in the tree checker detecting the issue and causing the
# mount operation to fail (with -EIO).
#
# This happened because in the log we have the new name/parent for
# inode 1458, which results in adding the new dentry with inode 256
# as the parent, but the previous dentry, under inode 257 was never
# removed - this is because the ranges for dir items and dir indexes
# of inode 257 for which the log is authoritative do not include the
# old dir item and dir index for the dentry of inode 257 referring to
# inode 1458:
#
# - for dir items, the log is authoritative for the ranges
# [0, 2285968570] and [4293818216, (u64)-1]. The dir item at inode 257
# pointing to inode 1458 has a key of (257 DIR_ITEM 3724298081), as
# previously mentioned, so the dir item is not deleted when the log
# replay procedure processes the authoritative ranges, as 3724298081
# is outside both ranges;
#
# - for dir indexes, the log is authoritative for the range
# [1203, (u64)-1], and the dir index item of inode 257 pointing to
# inode 1458 has a key of (257 DIR_INDEX 1202), as previously
# mentioned, so the dir index item is not deleted when the log
# replay procedure processes the authoritative range.
<power failure>
$ mount /dev/sdc /mnt
mount: /mnt: can't read superblock on /dev/sdc.
In this example the inode we moved was a directory, so it was easy to
detect the problem because directories can only have one hard link and
the tree checker immediately detects that. If the moved inode was a file,
then the log replay would succeed and we would end up having both the
new hard link (/mnt/foo) and the old hard link (/mnt/testdir/foo) present,
but only the new one should be present.
Fix this by forcing re-logging of the old parent directory when logging
the new name during a rename operation. This ensures we end up with a log
that is authoritative for a range covering the keys for the old dentry,
therefore causing the old dentry do be deleted when replaying the log.
A test case for fstests will follow up soon.
Fixes: 82cd65c0aebc0a ("btrfs: remove unnecessary check_parent_dirs_for_sync()") CC: stable@vger.kernel.org # 5.12+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Boris Burkov [Tue, 6 Apr 2021 22:31:18 +0000 (15:31 -0700)]
btrfs: return whole extents in fiemap
`xfs_io -c 'fiemap <off> <len>' <file>`
can give surprising results on btrfs that differ from xfs.
btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.
Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.
Some cases which all yield the same fiemap in xfs, but not btrfs:
dd if=/dev/zero of=$f bs=4k count=1
sudo xfs_io -c 'fiemap 0 1024' $f
0: [0..7]: 26624..26631
sudo xfs_io -c 'fiemap 2048 1024' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 2048 4096' $f
0: [4..7]: 26628..26631
sudo xfs_io -c 'fiemap 3584 512' $f
0: [7..7]: 26631..26631
sudo xfs_io -c 'fiemap 4091 5' $f
0: [7..6]: 26631..26630
I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.
after the fix, all the above commands give:
0: [0..7]: 26624..26631
The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.
Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Thu, 29 Apr 2021 14:51:34 +0000 (10:51 -0400)]
btrfs: avoid RCU stalls while running delayed iputs
Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally. However there's no guarantee of this, especially for small
files. In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:
btrfs: return 0 for dev_extent_hole_check_zoned hole_start in case of error
Commit 602d5a427aed ("btrfs: assign proper values to a bool variable in
dev_extent_hole_check_zoned") assigned false to the hole_start parameter
of dev_extent_hole_check_zoned().
The hole_start parameter is not boolean and returns the start location of
the found hole.
Fixes: 602d5a427aed ("btrfs: assign proper values to a bool variable in dev_extent_hole_check_zoned") Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Thu, 13 May 2021 19:28:10 +0000 (12:28 -0700)]
Merge tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These close a coverage gap in the intel_pstate driver and fix runtime
PM child count imbalance related to interactions with system-wide
suspend.
Specifics:
- Make intel_pstate work as expected on systems where the platform
firmware enables HWP even though the HWP EPP support is not
advertised (Rafael Wysocki).
- Fix possible runtime PM child count imbalance that may occur if
other runtime PM functions are called after invoking
pm_runtime_force_suspend() and before pm_runtime_force_resume()
is called (Tony Lindgren)"
* tag 'pm-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix unpaired parent child_count for force_resume
cpufreq: intel_pstate: Use HWP if enabled by platform firmware
Linus Torvalds [Thu, 13 May 2021 19:22:01 +0000 (12:22 -0700)]
Merge tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert an unnecessary revert of an ACPI power management commit,
add a missing device ID to one of the lists and fix a possible memory
leak in an error path.
Specifics:
- Revert a revert of a recent ACPI power management change that does
not need to be reverted after all (Rafael Wysocki).
- Add missing fan device ID to the list of device IDs for which the
devices should not be put into the ACPI PM domain (Sumeet
Pawnikar).
- Fix possible memory leak in an error path in the ACPI device
enumeration code (Christophe JAILLET)"
* tag 'acpi-5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Add ACPI ID of Alder Lake Fan
ACPI: scan: Fix a memory leak in an error handling path
Revert "Revert "ACPI: scan: Turn off unused power resources during initialization""
Jim Cromie [Tue, 4 May 2021 22:22:34 +0000 (16:22 -0600)]
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
Wrap function in a static-inline one, which checks flags to avoid
calling the function unnecessarily.
And hoist its output-buffer initialization to the grand-caller, which
is already allocating the buffer on the stack, and can trivially
initialize it too.
If a trace event uses the %*.s notation, the trace_check_vprintf() will
fail and will warn about a bad processing of strings, because it does not
take into account the length field when processing the star (*) part.
Have it handle this case as well.
Linus Torvalds [Thu, 13 May 2021 18:12:51 +0000 (11:12 -0700)]
Merge branch 'resizex' (patches from Maciej)
Merge VT_RESIZEX fixes from Maciej Rozycki:
"I got to the bottom of the issue with VT_RESIZEX recently discussed
and came up with this small patch series, fixing an additional issue
that I originally thought might be broken VGA hardware emulation with
my laptop, which however turned out to be intertwined with the
original problem and also a regression introduced somewhat later.
The fix for that because the first patch, and then to make backporting
feasible I had to put a revert of the offending change from last
September next, followed by a proper fix for the framebuffer issue
that change had tried to address.
See individual change descriptions for details.
These have been verified with true VGA hardware (a Trident TVGA8900
ISA video adapter) using various combinations of `svgatextmode' and
`setfont' command invocations to change both the VT size and the font
size, and also switching between the text console and X11, both by
starting/stopping the X server and by switching between VTs.
All this to ensure bringing the behaviour of VGA text console back to
correct operation as it used to be with Linux 2.6.18"
* emailed patches from Maciej W. Rozycki <macro@orcam.me.uk>:
vt: Fix character height handling with VT_RESIZEX
vt_ioctl: Revert VT_RESIZEX parameter handling removal
vgacon: Record video mode changes with VT_RESIZEX
Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.
For framebuffer devices the two values are always the same, because the
former is inferred from the latter one. For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator. One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.
The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within. Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.
This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 1b718a8c3a8a ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):
"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
larger than actual font height calculated by con_font_set() from
ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
minimal amount of memory based on actual font height calculated by
con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
data."
The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:
if (clin)
- video_font_height = clin;
+ vc->vc_font.height = clin;
making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable. Use "cell" in the new struct member then to avoid ambiguity.
Revert the removal of code handling extra VT_RESIZEX ioctl's parameters
beyond those that VT_RESIZE supports, fixing a functional regression
causing `svgatextmode' not to resize the VT anymore.
As a consequence of the reverted change when the video adapter is
reprogrammed from the original say 80x25 text mode using a 9x16
character cell (720x400 pixel resolution) to say 80x37 text mode and the
same character cell (720x592 pixel resolution), the VT geometry does not
get updated and only upper two thirds of the screen are used for the VT,
and the lower part remains blank. The proportions change according to
text mode geometries chosen.
Revert the change verbatim then, bringing back previous VT resizing.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1b718a8c3a8a ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl. As it stands in that case the original
screen geometry continues being used to validate further VT resizing.
Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen. Of course the
proportions change according to text mode geometries and font sizes
chosen.
Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 0e3b73acbaf3 ("vt/vgacon: Check if screen resize request comes from userspace") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Thu, 13 May 2021 17:07:17 +0000 (11:07 -0600)]
Merge tag 'nvme-5.13-2021-05-13' of git://git.infradead.org/nvme into block-5.13
Pull NVMe fixes from Christoph:
"nvme fix for Linux 5.13
- correct the check for using the inline bio in nvmet
(Chaitanya Kulkarni)
- demote unsupported command warnings (Chaitanya Kulkarni)
- fix corruption due to double initializing ANA state (me, Hou Pu)
- reset ns->file when open fails (Daniel Wagner)
- fix a NULL deref when SEND is completed with error in nvmet-rdma
(Michal Kalderon)"
* tag 'nvme-5.13-2021-05-13' of git://git.infradead.org/nvme:
nvmet: use new ana_log_size instead the old one
nvmet: seset ns->file when open fails
nvmet: demote fabrics cmd parse err msg to debug
nvmet: use helper to remove the duplicate code
nvmet: demote discovery cmd parse err msg to debug
nvmet-rdma: Fix NULL deref when SEND is completed with error
nvmet: fix inline bio check for passthru
nvmet: fix inline bio check for bdev-ns
nvme-multipath: fix double initialization of ANA state
Linus Torvalds [Thu, 13 May 2021 16:58:53 +0000 (09:58 -0700)]
Merge tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix bugs/regressions in adm9240, ltc2992, pmbus/fsp-3y, and occ
drivers, plus a minor cleanup in the corsair-psu driver"
* tag 'hwmon-for-v5.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adm9240) Fix writes into inX_max attributes
hwmon: (ltc2992) Put fwnode in error case during ->probe()
hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding
hwmon: (occ) Fix poll rate limiting
hwmon: (corsair-psu) Remove unneeded semicolons
cdrom: gdrom: initialize global variable at init time
As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems. Fix this up by just initializing the
whole thing to 0 at probe() time.
Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.
Reported-by: Peter Rosin <peda@axentia.se> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all possible errors that might happen. Fix up all of this by
only allowing the module to load if all bus registering worked properly.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit here did nothing to actually help if usb_register()
failed, so it gives a "false sense of security" when there is none. The
correct solution is to correctly unwind from this error.
We should check if ioremap() were to somehow fail in imsttfb_probe() and
handle the unwinding of the resources allocated here properly.
Ideally if anyone cares about this driver (it's for a PowerMac era PCI
display card), they wouldn't even be using fbdev anymore. Or the devm_*
apis could be used, but that's just extra work for diminishing
returns...
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.
Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.
Tom Seewald [Mon, 3 May 2021 11:57:32 +0000 (13:57 +0200)]
net: liquidio: Add missing null pointer checks
The functions send_rx_ctrl_cmd() in both liquidio/lio_main.c and
liquidio/lio_vf_main.c do not check if the call to
octeon_alloc_soft_command() fails and returns a null pointer. Both
functions also return void so errors are not propagated back to the
caller.
Fix these issues by updating both instances of send_rx_ctrl_cmd() to
return an integer rather than void, and have them return -ENOMEM if an
allocation failure occurs. Also update all callers of send_rx_ctrl_cmd()
so that they now check the return value.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
While the original commit does keep the immediate "NULL dereference"
from happening, it does not properly propagate the error back to the
callers, AND it does not fix this same identical issue in the
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c for some reason.
projects / kernel.git / log