Ard Biesheuvel [Thu, 21 Oct 2021 14:16:47 +0000 (16:16 +0200)]
ARM: stackprotector: prefer compiler for TLS based per-task protector
Currently, we implement the per-task stack protector for ARM using a GCC
plugin, due to lack of native compiler support. However, work is
underway to get this implemented in the compiler, which means we will be
able to deprecate the GCC plugin at some point.
In the meantime, we will need to support both, where the native compiler
implementation is obviously preferred. So let's wire this up in Kconfig
and the Makefile.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
Ard Biesheuvel [Tue, 26 Oct 2021 08:23:31 +0000 (10:23 +0200)]
ARM: decompressor: disable stack protector
Enabling the stack protector in the decompressor is of dubious value,
given that it uses a fixed value for the canary, cannot print any output
unless CONFIG_DEBUG_LL is enabled (which relies on board specific build
time settings), and is already disabled for a good chunk of the code
(libfdt).
So let's just disable it in the decompressor. This will make it easier
in the future to manage the command line options that would need to be
removed again in this context for the TLS register based stack
protector.
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.
The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.
Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.
This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)
Linus Torvalds [Sun, 14 Nov 2021 20:18:22 +0000 (12:18 -0800)]
Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"The most 'exciting' aspect of this branch is that the xfsprogs
maintainer and I have worked through the last of the code
discrepancies between kernel and userspace libxfs such that there are
no code differences between the two except for #includes.
IOWs, diff suffices to demonstrate that the userspace tools behave the
same as the kernel, and kernel-only bits are clearly marked in the
/kernel/ source code instead of just the userspace source.
Summary:
- Clean up open-coded swap() calls.
- A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code"
* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: sync xfs_btree_split macros with userspace libxfs
xfs: #ifdef out perag code for userspace
xfs: use swap() to make dabtree code cleaner
Linus Torvalds [Sun, 14 Nov 2021 19:53:59 +0000 (11:53 -0800)]
Merge tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc fixes from Helge Deller:
"Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code and
flush userspace pte's when using set_pte_at()"
* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/entry: fix trace test in syscall exit path
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
parisc: Fix implicit declaration of function '__kernel_text_address'
parisc: Fix backtrace to always include init funtion names
Linus Torvalds [Sun, 14 Nov 2021 19:37:49 +0000 (11:37 -0800)]
Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
Linus Torvalds [Sun, 14 Nov 2021 19:30:50 +0000 (11:30 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
Linus Torvalds [Sun, 14 Nov 2021 19:11:51 +0000 (11:11 -0800)]
Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Linus Torvalds [Sun, 14 Nov 2021 18:43:38 +0000 (10:43 -0800)]
Merge tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because
copy_process() copies state information which is only valid for the
parent task"
* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
Linus Torvalds [Sun, 14 Nov 2021 18:38:27 +0000 (10:38 -0800)]
Merge tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem
Core code:
- A regression fix for the Open Firmware interrupt mapping code where
a interrupt controller property in a node caused a map property in
the same node to be ignored.
Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which
silently ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse
the chip comes out of reset with all MSI entries masked, which due
to the missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code"
* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
of/irq: Don't ignore interrupt-controller when interrupt-map failed
irqchip/sifive-plic: Fixup EOI failed when masked
irqchip/csky-mpintc: Fixup mask/unmask implementation
PCI/MSI: Destroy sysfs before freeing entries
PCI: Add MSI masking quirk for Nvidia ION AHCI
PCI/MSI: Deal with devices lying about their MSI mask capability
PCI/MSI: Move non-mask check back into low level accessors
Linus Torvalds [Sun, 14 Nov 2021 18:30:17 +0000 (10:30 -0800)]
Merge tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 static call update from Thomas Gleixner:
"A single fix for static calls to make the trampoline patching more
robust by placing explicit signature bytes after the call trampoline
to prevent patching random other jumps like the CFI jump table
entries"
* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
static_call,x86: Robustify trampoline patching
Linus Torvalds [Sun, 14 Nov 2021 17:39:03 +0000 (09:39 -0800)]
Merge tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Avoid touching ~100 config files in order to be able to select the
preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix
a booting of Xen PV guests
* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Restore preemption model selection configs
arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
sched/fair: Prevent dead task groups from regaining cfs_rq's
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
x86/smp: Factor out parts of native_smp_prepare_cpus()
Linus Torvalds [Sun, 14 Nov 2021 17:33:12 +0000 (09:33 -0800)]
Merge tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Prevent unintentional page sharing by checking whether a page
reference to a PMU samples page has been acquired properly before
that
- Make sure the LBR_SELECT MSR is saved/restored too
- Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
residual data left
* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Avoid put_page() when GUP fails
perf/x86/vlbr: Add c->flags to vlbr event constraints
perf/x86/lbr: Reset LBR_SELECT during vlbr reset
Linus Torvalds [Sun, 14 Nov 2021 17:29:03 +0000 (09:29 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add the model number of a new, Raptor Lake CPU, to intel-family.h
- Do not log spurious corrected MCEs on SKL too, due to an erratum
- Clarify the path of paravirt ops patches upstream
- Add an optimization to avoid writing out AMX components to sigframes
when former are in init state
* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Raptor Lake to Intel family
x86/mce: Add errata workaround for Skylake SKX37
MAINTAINERS: Add some information to PARAVIRT_OPS entry
x86/fpu: Optimize out sigframe xfeatures when in init state
Linus Torvalds [Sun, 14 Nov 2021 17:25:01 +0000 (09:25 -0800)]
Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Hardware tracing:
- ARM:
* Print the size of the buffer size consistently in hexadecimal in
ARM Coresight.
* Add Coresight snapshot mode support.
* Update --switch-events docs in 'perf record'.
* Support hardware-based PID tracing.
* Track task context switch for cpu-mode events.
- Fix memory leak of perf_cpu_map__new() in the futex benchmarks.
libbpf:
- Add some more weak libbpf functions o allow building with the
libbpf versions, old ones, present in distros.
libbeauty:
- Translate [gs]setsockopt 'level' argument integer values to
strings.
tools headers UAPI:
- Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
with the kernel sources.
Documentation:
- Add documentation to 'struct symbol'.
- Synchronize the definition of enum perf_hw_id with code in
tools/perf/design.txt"
* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf tests: Remove bash constructs from stat_all_pmu.sh
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
perf test: Remove bash construct from stat_bpf_counters.sh test
perf bench futex: Fix memory leak of perf_cpu_map__new()
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync sound/asound.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
perf tools: Add more weak libbpf functions
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf symbols: Factor out annotation init/exit
perf symbols: Bit pack to save a byte
perf symbols: Add documentation to 'struct symbol'
tools headers UAPI: Sync files changed by new futex_waitv syscall
perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
perf arm-spe: Support hardware-based PID tracing
perf arm-spe: Save context ID in record
perf arm-spe: Update --switch-events docs in 'perf record'
perf arm-spe: Track task context switch for cpu-mode events
...
Linus Torvalds [Sat, 13 Nov 2021 23:32:30 +0000 (15:32 -0800)]
Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Linus Torvalds [Sat, 13 Nov 2021 21:14:05 +0000 (13:14 -0800)]
Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux
Pull virtio-mem update from David Hildenbrand:
"Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem,
now that "accidential" access to logically unplugged memory inside
added Linux memory blocks is no longer possible, because we:
- Removed /dev/kmem in commit 9944c199d6f3 ("drivers/char: remove
/dev/kmem for good")
- Disallowed access to virtio-mem device memory via /dev/mem in
commit ff2e8b264ba ("virtio-mem: disallow mapping virtio-mem memory
via /dev/mem")
- Sanitized access to virtio-mem device memory via /proc/kcore in
commit 352b20752f0f ("fs/proc/kcore: don't read offline sections,
logically offline pages and hwpoisoned pages")
- Sanitized access to virtio-mem device memory via /proc/vmcore in
commit b4157c21a510 ("virtio-mem: kdump mode to sanitize
/proc/vmcore access")
The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
required by some hypervisors implementing virtio-mem in the near
future, so let's support it now that we safely can"
* tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux:
virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
Changing the regexes to a grep works in sh and prints this:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 60186
[...]
Testing tlb_flush.stlb_any
test child finished with 0
---- end ----
perf all PMU test: Ok
Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 28 Oct 2021 13:48:26 +0000 (14:48 +0100)]
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
Commit d4215ac8cdda ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes: d4215ac8cdda ("perf tests: Fix test 68 zstd compression for s390") Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 28 Oct 2021 13:48:25 +0000 (14:48 +0100)]
perf test: Remove bash construct from stat_bpf_counters.sh test
Currently the test skips with an error because == only works in bash:
$ ./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 44586
./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Changing == to = does the same thing, but doesn't result in an error:
./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 45833
Skipping: --bpf-counters not supported
Error: unknown option `bpf-counters'
[...]
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick up the changes in:
6032c33f46953494 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface") 012d3f3c35f4e0f7 ("drm/i915: Expose logical engine instance to user") f4453687a2139073 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values") bca9cff5618d2e30 ("drm/i915/pxp: interfaces for using protected objects") dc5aa4acdd6ec66c ("drm/i915/pxp: Create the arbitrary session after boot")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Huang, Sean Z <sean.z.huang@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync sound/asound.h with the kernel sources
To pick up the changes in:
ab36f8bd17d614c8 ("ALSA: uapi: Fix a C++ style comment in asound.h")
That is just changing a // style comment to /* */.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync linux/prctl.h with the kernel sources
To pick the changes in:
d4357949fceba486 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument")
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h
Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 9 Nov 2021 14:07:06 +0000 (15:07 +0100)]
perf tools: Add more weak libbpf functions
We hit the window where perf uses libbpf functions, that did not make it
to the official libbpf release yet and it's breaking perf build with
dynamicly linked libbpf.
Fixing this by providing the new interface as weak functions which calls
the original libbpf functions. Fortunatelly the changes were just
renames.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211109140707.1689940-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Nov 2021 07:45:25 +0000 (23:45 -0800)]
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
Fixes: 0414484895684c0b ("perf bpf: Save BTF in a rbtree in perf_env") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex_waitv tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
449 common futex_waitv sys_futex_waitv
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
German Gomez [Thu, 11 Nov 2021 13:36:25 +0000 (13:36 +0000)]
perf arm-spe: Support hardware-based PID tracing
If ARM SPE traces contains CONTEXT packets with TID info, use these
values for tracking the TID of samples. Otherwise fall back to using
context switch events and display a message warning to the user of
possible timing inaccuracies [1].
Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211111133625.193568-5-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Thu, 11 Nov 2021 13:36:24 +0000 (13:36 +0000)]
perf arm-spe: Save context ID in record
This patch is to save context ID in record, this will be used to set TID
for samples.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211111133625.193568-4-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Thu, 11 Nov 2021 13:36:23 +0000 (13:36 +0000)]
perf arm-spe: Update --switch-events docs in 'perf record'
Update 'perf record' docs and ARM SPE recording options so that they are
consistent. This includes supporting the --no-switch-events flag in ARM
SPE as well.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211111133625.193568-3-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 11 Nov 2021 13:36:22 +0000 (13:36 +0000)]
perf arm-spe: Track task context switch for cpu-mode events
When perf report synthesize events from ARM SPE data, it refers to
current cpu, pid and tid in the machine. But there's no place to set
them in the ARM SPE decoder. I'm seeing all pid/tid is set to -1 and
user symbols are not resolved in the output.
# perf record -a -e arm_spe_0/ts_enable=1/ sleep 1
Like Intel PT, add context switch records to track task info. As ARM
SPE support was added later than PERF_RECORD_SWITCH_CPU_WIDE, I think
we can safely set the attr.context_switch bit and use it.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211111133625.193568-2-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like Xu [Tue, 9 Nov 2021 09:01:47 +0000 (17:01 +0800)]
perf design.txt: Synchronize the definition of enum perf_hw_id with code
We're not surprised that there are tons of Linux users who only read the
documentation to learn about the kernel.
Let's update the perf part for common hardware events since three new
*generic* hardware events were added.
Signed-off-by: Like Xu <likexu@tencent.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211109090147.56978-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Kilroy [Tue, 9 Nov 2021 14:21:53 +0000 (14:21 +0000)]
perf arm-spe: Print size using consistent format
Since the size is already printed earlier in hex, print the same data
using the same format, in hex.
Reviewed-by: James Clark <james.clark@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211109142153.56546-3-german.gomez@arm.com Signed-off-by: German Gomez <german.gomez@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Kilroy [Tue, 9 Nov 2021 14:21:52 +0000 (14:21 +0000)]
perf cs-etm: Print size using consistent format
Since the size is already printed earlier in hex, print the same data
using the same format, in hex.
Reviewed-by: James Clark <james.clark@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211109142153.56546-2-german.gomez@arm.com Signed-off-by: German Gomez <german.gomez@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Tue, 9 Nov 2021 16:30:09 +0000 (16:30 +0000)]
perf arm-spe: Snapshot mode test
Shell script test_arm_spe.sh has been added to test the recording of SPE
tracing events in snapshot mode.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211109163009.92072-4-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Tue, 9 Nov 2021 16:30:08 +0000 (16:30 +0000)]
perf arm-spe: Implement find_snapshot callback
The head pointer of the AUX buffer managed by the arm_spe_pmu.c driver
is not monotonically increasing, therefore the find_snapshot callback is
needed in order to find the trace data within the AUX buffer and avoid
wasting space in the perf.data file.
The pointer is assumed to have wrapped if the buffer contains non-zero
data at the end. If it has wrapped, the entire contents of the AUX
buffer are stored in the perf.data file. Otherwise only the data up to
the head pointer is stored.
Reviewed-by: James Clark <james.clark@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211109163009.92072-3-german.gomez@arm.com Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Tue, 9 Nov 2021 16:30:07 +0000 (16:30 +0000)]
perf arm-spe: Add snapshot mode support
This patch enables support for snapshot mode of arm_spe events,
including the implementation of the necessary callbacks (excluding
find_snapshot, which is to be included in a followup commit).
Reviewed-by: James Clark <james.clark@arm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211109163009.92072-2-german.gomez@arm.com Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 11 Nov 2021 00:21:09 +0000 (16:21 -0800)]
perf expr: Add source_count for aggregating events
Events like uncore_imc/cas_count_read/ on Skylake open multiple events
and then aggregate in the metric leader. To determine the average value
per event the number of these events is needed. Add a source_count
function that returns this value by counting the number of events with
the given metric leader. For most events the value is 1 but for
uncore_imc/cas_count_read/ it can yield values like 6.
Add a generic test, but manually tested with a test metric that uses
the function.
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul A . Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Wan Jiabing <wanjiabing@vivo.com> Cc: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20211111002109.194172-9-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 11 Nov 2021 00:21:06 +0000 (16:21 -0800)]
perf expr: Add literal values starting with #
It is useful to have literal values for constants relating to
topologies, SMT, etc. Make the parsing of literals shared code and add a
lookup function. Move #smt_on to this function.
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul A . Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Wan Jiabing <wanjiabing@vivo.com> Cc: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20211111002109.194172-6-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 11 Nov 2021 00:21:03 +0000 (16:21 -0800)]
perf cputopo: Update to use pakage_cpus
core_siblings_list is the deprecated topology name for
package_cpus_list, update the code to try the non-deprecated path first.
Adjust variable names to match topology name.
Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul A . Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <song@kernel.org> Cc: Wan Jiabing <wanjiabing@vivo.com> Cc: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20211111002109.194172-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sven Schnelle [Sat, 13 Nov 2021 19:41:17 +0000 (20:41 +0100)]
parisc/entry: fix trace test in syscall exit path
commit 6068dcb91c86 ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.
Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.
I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.
Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
For years, there have been random segmentation faults in userspace on
SMP PA-RISC machines. It occurred to me that this might be a problem in
set_pte_at(). MIPS and some other architectures do cache flushes when
installing PTEs with the present bit set.
Here I have adapted the code in update_mmu_cache() to flush the kernel
mapping when the kernel flush is deferred, or when the kernel mapping
may alias with the user mapping. This simplifies calls to
update_mmu_cache().
I also changed the barrier in set_pte() from a compiler barrier to a
full memory barrier. I know this change is not sufficient to fix the
problem. It might not be needed.
I have had a few days of operation with 5.14.16 to 5.15.1 and haven't
seen any random segmentation faults on rp3440 or c8000 so far.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@kernel.org # 5.12+
Helge Deller [Thu, 4 Nov 2021 19:19:00 +0000 (20:19 +0100)]
parisc: Fix backtrace to always include init funtion names
I noticed that sometimes at kernel startup the backtraces did not
included the function names of init functions. Their address were not
resolved to function names and instead only the address was printed.
Debugging shows that the culprit is is_ksym_addr() which is called
by the backtrace functions to check if an address belongs to a function in
the kernel. The problem occurs only for CONFIG_KALLSYMS_ALL=y.
When looking at is_ksym_addr() one can see that for CONFIG_KALLSYMS_ALL=y
the function only tries to resolve the address via is_kernel() function,
which checks like this:
if (addr >= _stext && addr <= _end)
return 1;
On parisc the init functions are located before _stext, so this check fails.
Other platforms seem to have all functions (including init functions)
behind _stext.
The following patch moves the _stext symbol at the beginning of the
kernel and thus includes the init section. This fixes the check and does
not seem to have any negative side effects on where the kernel mapping
happens in the map_pages() function in arch/parisc/mm/init.c.
Linus Torvalds [Sat, 13 Nov 2021 21:07:29 +0000 (13:07 -0800)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the second batch of clk driver updates that needed a little
more time to soak in linux-next.
- Use modern i2c probe in vc5
- Cleanup some includes
- Update links to datasheets
- Add UniPhier NX1 SoC clk support
- Fix DT bindings for SiFive FU740
- Revert the module platform driver support for Rockchip because it
wasn't actually tested
- Fix the composite clk code again as the previous fix had a one line
bug that broke rate changes for clks that want to use the same
parent still
- Use the right table for a divider in ast2600 driver
- Get rid of gcc_aggre1_pnoc_ahb_clk in qcom clk driver again because
its critical but unused"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites
clk/ast2600: Fix soc revision for AHB
clk: composite: Fix 'switching' to same clock
clk: rockchip: drop module parts from rk3399 and rk3568 drivers
Revert "clk: rockchip: use module_platform_driver_probe"
clk:mediatek: remove duplicate include in clk-mt8195-imp_iic_wrap.c
dt-bindings: clock: fu740-prci: add reset-cells
clk: uniphier: Add SoC-glue clock source selector support for Pro4
dt-bindings: clock: uniphier: Add clock binding for SoC-glue
clk: uniphier: Add NX1 clock support
dt-bindings: clock: uniphier: Add NX1 clock binding
clk: uniphier: Add audio system and video input clock control for PXs3
clk: si5351: Update datasheet references
clk: vc5: Use i2c .probe_new
clk/actions/owl-factor.c: remove superfluous headers
clk: ingenic: Fix bugs with divided dividers
Linus Torvalds [Sat, 13 Nov 2021 20:55:53 +0000 (12:55 -0800)]
Merge tag 'block-5.16-2021-11-13' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this merge window:
- ioctl vs read data race fixes (Shin'ichiro)
- blkcg use-after-free fix (Laibin)
- Last piece of the puzzle for add_disk() error handling, enable
__must_check for (Luis)
- Request allocation fixes (Ming)
- Misc fixes (me)"
* tag 'block-5.16-2021-11-13' of git://git.kernel.dk/linux-block:
blk-mq: fix filesystem I/O request allocation
blkcg: Remove extra blkcg_bio_issue_init
block: Hold invalidate_lock in BLKRESETZONE ioctl
blk-mq: rename blk_attempt_bio_merge
blk-mq: don't grab ->q_usage_counter in blk_mq_sched_bio_merge
block: fix kerneldoc for disk_register_independent_access__ranges()
block: add __must_check for *add_disk*() callers
block: use enum type for blk_mq_alloc_data->rq_flags
block: Hold invalidate_lock in BLKZEROOUT ioctl
block: Hold invalidate_lock in BLKDISCARD ioctl
Linus Torvalds [Sat, 13 Nov 2021 20:24:19 +0000 (12:24 -0800)]
Merge tag '5.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- improvements to reconnect and multichannel
- a performance improvement (additional use of SMB3 compounding)
- DFS code cleanup and improvements
- various trivial Coverity fixes
- two fscache fixes
- an fsync fix
* tag '5.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (23 commits)
cifs: do not duplicate fscache cookie for secondary channels
cifs: connect individual channel servers to primary channel server
cifs: protect session channel fields with chan_lock
cifs: do not negotiate session if session already exists
smb3: do not setup the fscache_super_cookie until fsinfo initialized
cifs: fix potential use-after-free bugs
cifs: fix memory leak of smb3_fs_context_dup::server_hostname
smb3: add additional null check in SMB311_posix_mkdir
cifs: release lock earlier in dequeue_mid error case
smb3: add additional null check in SMB2_tcon
smb3: add additional null check in SMB2_open
smb3: add additional null check in SMB2_ioctl
smb3: remove trivial dfs compile warning
cifs: support nested dfs links over reconnect
smb3: do not error on fsync when readonly
cifs: for compound requests, use open handle if possible
cifs: set a minimum of 120s for next dns resolution
cifs: split out dfs code from cifs_reconnect()
cifs: convert list_for_each to entry variant
cifs: introduce new helper for cifs_reconnect()
...
The error handling of that patch was fundamentally broken, and it needs
to be entirely re-done.
For example, in shmem_write_begin() it would call shmem_getpage(), then
ignore the error return from that, and look at the page pointer contents
instead.
And in shmem_read_mapping_page_gfp(), the patch tested PageHWPoison() on
a page pointer that two lines earlier had potentially been set as an
error pointer.
These issues could be individually fixed, but when it has this many
issues, I'm just reverting it instead of waiting for fixes.
Link: https://lore.kernel.org/linux-mm/20211111084617.6746-1-ajaygargnsit@gmail.com/ Reported-by: Ajay Garg <ajaygargnsit@gmail.com> Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Yang Shi <shy828301@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Nov 2021 19:38:43 +0000 (11:38 -0800)]
Merge tag '5.16-rc-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd updates from Steve French:
"Several smb server fixes; three for stable:
- important fix for negotiation info validation
- fix alignment check in packet validation
- cleanup of dead code (like MD4)
- refactoring some protocol headers to use common code in smbfs_common"
* tag '5.16-rc-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: Use the SMB3_Create definitions from the shared
ksmbd: Move more definitions into the shared area
ksmbd: use the common definitions for NEGOTIATE_PROTOCOL
ksmbd: switch to use shared definitions where available
ksmbd: change LeaseKey data type to u8 array
ksmbd: remove smb2_buf_length in smb2_transform_hdr
ksmbd: remove smb2_buf_length in smb2_hdr
ksmbd: remove md4 leftovers
ksmbd: set unique value to volume serial field in FS_VOLUME_INFORMATION
ksmbd: don't need 8byte alignment for request length in ksmbd_check_message
ksmbd: Fix buffer length check in fsctl_validate_negotiate_info()
ksmbd: Remove redundant 'flush_workqueue()' calls
ksmdb: use cmd helper variable in smb2_get_ksmbd_tcon()
ksmbd: use ksmbd_req_buf_next() in ksmbd_smb2_check_message()
ksmbd: use ksmbd_req_buf_next() in ksmbd_verify_smb_message()
Linus Torvalds [Sat, 13 Nov 2021 19:31:07 +0000 (11:31 -0800)]
Merge tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"One notable change here is that async creates and unlinks introduced
in 5.7 are now enabled by default. This should greatly speed up things
like rm, tar and rsync. To opt out, wsync mount option can be used.
Other than that we have a pile of bug fixes all across the filesystem
from Jeff, Xiubo and Kotresh and a metrics infrastructure rework from
Luis"
* tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client:
ceph: add a new metric to keep track of remote object copies
libceph, ceph: move ceph_osdc_copy_from() into cephfs code
ceph: clean-up metrics data structures to reduce code duplication
ceph: split 'metric' debugfs file into several files
ceph: return the real size read when it hits EOF
ceph: properly handle statfs on multifs setups
ceph: shut down mount on bad mdsmap or fsmap decode
ceph: fix mdsmap decode when there are MDS's beyond max_mds
ceph: ignore the truncate when size won't change with Fx caps issued
ceph: don't rely on error_string to validate blocklisted session.
ceph: just use ci->i_version for fscache aux info
ceph: shut down access to inode when async create fails
ceph: refactor remove_session_caps_cb
ceph: fix auth cap handling logic in remove_session_caps_cb
ceph: drop private list from remove_session_caps_cb
ceph: don't use -ESTALE as special return code in try_get_cap_refs
ceph: print inode numbers instead of pointer values
ceph: enable async dirops by default
libceph: drop ->monmap and err initialization
ceph: convert to noop_direct_IO
Linus Torvalds [Sat, 13 Nov 2021 19:27:02 +0000 (11:27 -0800)]
Merge tag 'erofs-for-5.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- fix unsafe pagevec reuse which could cause unexpected behaviors
- get rid of the unused DELAYEDALLOC strategy that has been replaced by
TRYALLOC
* tag 'erofs-for-5.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove useless cache strategy of DELAYEDALLOC
erofs: fix unsafe pagevec reuse of hooked pclusters
Linus Torvalds [Sat, 13 Nov 2021 19:20:22 +0000 (11:20 -0800)]
Merge tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've applied relatively small number of patches which
fix subtle corner cases mainly, while introducing a new mount option
to be able to fragment the disk intentionally for performance tests.
Enhancements:
- add a mount option to fragmente on-disk layout to understand the
performance
- support direct IO for multi-partitions
- add a fault injection of dquot_initialize
Bug fixes:
- address some lockdep complaints
- fix a deadlock issue with quota
- fix a memory tuning condition
- fix compression condition to improve the ratio
- fix disabling compression on the non-empty compressed file
- invalidate cached pages before IPU/DIO writes
And, we've added some minor clean-ups as usual"
* tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix UAF in f2fs_available_free_memory
f2fs: invalidate META_MAPPING before IPU/DIO write
f2fs: support fault injection for dquot_initialize()
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
f2fs: compress: disallow disabling compress on non-empty compressed file
f2fs: compress: fix overwrite may reduce compress ratio unproperly
f2fs: multidevice: support direct IO
f2fs: introduce fragment allocation mode mount option
f2fs: replace snprintf in show functions with sysfs_emit
f2fs: include non-compressed blocks in compr_written_block
f2fs: fix wrong condition to trigger background checkpoint correctly
f2fs: fix to use WHINT_MODE
f2fs: fix up f2fs_lookup tracepoints
f2fs: set SBI_NEED_FSCK flag when inconsistent node block found
f2fs: introduce excess_dirty_threshold()
f2fs: avoid attaching SB_ACTIVE flag during mount
f2fs: quota: fix potential deadlock
f2fs: should use GFP_NOFS for directory inodes
Linus Torvalds [Sat, 13 Nov 2021 19:15:15 +0000 (11:15 -0800)]
Merge tag 'netfs-folio-20211111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs, 9p, afs and ceph (partial) foliation from David Howells:
"This converts netfslib, 9p and afs to use folios. It also partially
converts ceph so that it uses folios on the boundaries with netfslib.
To help with this, a couple of folio helper functions are added in the
first two patches.
These patches don't touch fscache and cachefiles as I intend to remove
all the code that deals with pages directly from there. Only nfs and
cifs are using the old fscache I/O API now. The new API uses iov_iter
instead.
Thanks to Jeff Layton, Dominique Martinet and AuriStor for testing and
retesting the patches"
* tag 'netfs-folio-20211111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use folios in directory handling
netfs, 9p, afs, ceph: Use folios
folio: Add a function to get the host inode for a folio
folio: Add a function to change the private data attached to a folio
Linus Torvalds [Sat, 13 Nov 2021 18:45:17 +0000 (10:45 -0800)]
Merge tag 'coccinelle-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
- Update MAINTAINERS information (mailing list, web page, etc).
- Add a semantic patch from Wen Yang to check for do_div calls that may
cause truncation, motivated by commit bc3b561bac39 ("sched: Fix
possible divide by zero in avg_atom() calculation")
* tag 'coccinelle-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
coccinelle: update Coccinelle entry
coccinelle: semantic patch to check for inappropriate do_div() calls
Linus Torvalds [Sat, 13 Nov 2021 18:27:50 +0000 (10:27 -0800)]
Merge tag 'selinux-pr-20211112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Unfortunately I need to request a revert for two LSM/SELinux patches
that came in via the network tree. The two patches in question add a
new SCTP/LSM hook as well as an SELinux implementation of that LSM
hook. The short version of "why?" is in the commit description of the
revert patch, but I'll copy-n-paste the important bits below to save
some time for the curious:
... Unfortunately these two patches were merged without proper
review (the Reviewed-by and Tested-by tags from Richard Haines
were for previous revisions of these patches that were
significantly different) and there are outstanding objections from
the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in
the reverted patches, as well as others that have come up during
review, but it is unclear at this point in time when that work
will be ready for inclusion in the mainline kernel. In the
interest of not keeping objectionable code in the kernel for
multiple weeks, and potentially a kernel release, we are reverting
the two problematic patches.
As usual with these things there is plenty of context to go with this
and I'll try to do my best to provide that now. This effort started
with a report of SCTP client side peel-offs not working correctly with
SELinux, Ondrej Mosnacek put forth a patch which he believed properly
addressed the problem but upon review by the netdev folks Xin Long
described some additional issues and submitted an improved patchset
for review. The SELinux folks reviewed Xin Long's initial patchset and
suggested some changes which resulted in a second patchset (v2) from
Xin Long; this is the patchset that is currently in your tree.
Unfortunately this v2 patchset from Xin Long was merged before it had
spent even just 24 hours on the mailing lists during the early days of
the merge window, a time when many of us were busy doing verification
of the newly released v5.15 kernel as well final review and testing of
our v5.16 pull requests. Making matters worse, upon reviewing the v2
patchset there were both changes which were found objectionable by
SELinux standards as well as additional outstanding SCTP/SELinux
interaction problems. At this point we did two things: resumed working
on a better fix for the SCTP/SELinux issue(s) - thank you Ondrej - and
we asked the networking folks to revert the v2 patchset.
The revert request was obviously rejected, but at the time I believed
it was just going to be an issue for linux-next; I wasn't expecting
something this significant that was merged into the networking tree
during the merge window to make it into your tree in the same window,
yet as of last night that is exactly what happened. While we continue
to try and resolve the SCTP/SELinux problem I am asking once again to
revert the v2 patches and not ship the current
security_sctp_assoc_established() hook in a v5.16-rcX kernel. If I was
confident that we could solve these issues in a week, maybe two, I
would refrain from asking for the revert but our current estimate is
for a minimum of two weeks for the next patch revision. With the
likelihood of additional delays due to normal patch review follow-up
and/or holidays it seems to me that the safest course of action is to
revert the patch both to try and keep some objectionable code out of a
release kernel and limit the chances of any new breakages from such a
change. While the SCTP/SELinux code in v5.15 and earlier has problems,
they are known problems, and I'd like to try and avoid creating new
and different problems while we work to fix things properly.
One final thing to mention: Xin Long's v2 patchset consisted of four
patches, yet this revert is for only the last two. We see the first
two patches as good, reasonable, and not likely to cause an issue. In
an attempt to create a cleaner revert patch we suggest leaving the
first two patches in the tree as they are currently"
* tag 'selinux-pr-20211112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
net,lsm,selinux: revert the security_sctp_assoc_established() hook
Linus Torvalds [Sat, 13 Nov 2021 18:11:51 +0000 (10:11 -0800)]
Merge tag 'trace-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Make local osnoise_instances static
- Copy just actual size of histogram strings
- Properly check missing operands in histogram expressions"
* tag 'trace-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/histogram: Fix check for missing operands in an expression
tracing/histogram: Do not copy the fixed-size char array field over the field size
tracing/osnoise: Make osnoise_instances static
Linus Torvalds [Sat, 13 Nov 2021 18:01:10 +0000 (10:01 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"New x86 features:
- Guest API and guest kernel support for SEV live migration
- SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
- Fix misuse of gfn-to-pfn cache when recording guest steal time /
preempted status
- Fix selftests on APICv machines
- Fix sparse warnings
- Fix detection of KVM features in CPUID
- Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
- Fixes and cleanups for MSR bitmap handling
- Cleanups for INVPCID
- Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
- Fix finalization of host stage2 mappings
- Tighten the return value of kvm_vcpu_preferred_target()
- Make sure the extraction of ESR_ELx.EC is limited to architected
bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: SEV: unify cgroup cleanup code for svm_vm_migrate_from
KVM: x86: move guest_pv_has out of user_access section
KVM: x86: Drop arbitrary KVM_SOFT_MAX_VCPUS
KVM: Move INVPCID type check from vmx and svm to the common kvm_handle_invpcid()
KVM: VMX: Add a helper function to retrieve the GPR index for INVPCID, INVVPID, and INVEPT
KVM: nVMX: Clean up x2APIC MSR handling for L2
KVM: VMX: Macrofy the MSR bitmap getters and setters
KVM: nVMX: Handle dynamic MSR intercept toggling
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
KVM: x86: Don't update vcpu->arch.pv_eoi.msr_val when a bogus value was written to MSR_KVM_PV_EOI_EN
KVM: x86: Rename kvm_lapic_enable_pv_eoi()
KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES
KVM: x86: Add helper to consolidate core logic of SET_CPUID{2} flows
kvm: mmu: Use fast PF path for access tracking of huge pages when possible
KVM: x86/mmu: Properly dereference rcu-protected TDP MMU sptep iterator
KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active
kvm: x86: Convert return type of *is_valid_rdpmc_ecx() to bool
KVM: x86: Fix recording of guest steal time / preempted status
selftest: KVM: Add intra host migration tests
selftest: KVM: Add open sev dev helper
...
Linus Torvalds [Sat, 13 Nov 2021 17:18:06 +0000 (09:18 -0800)]
Merge tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Add PCI automatic error recovery.
- Fix tape driver timer initialization broken during timers api
cleanup.
- Fix bogus CPU measurement counters values on CPUs offlining.
- Check the validity of subchanel before reading other fields in the
schib in cio code.
* tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: check the subchannel validity for dev_busid
s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove
s390/tape: fix timer initialization in tape_std_assign()
s390/pci: implement minimal PCI error recovery
PCI: Export pci_dev_lock()
s390/pci: implement reset_slot for hotplug slot
s390/pci: refresh function handle in iomap
Linus Torvalds [Sat, 13 Nov 2021 17:11:33 +0000 (09:11 -0800)]
Merge tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull more MIPS updates from Thomas Bogendoerfer:
- Config updates for BMIPS platform
- Build fixes
- Makefile cleanups
* tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: decompressor: do not copy source files while building
MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
MIPS: fix duplicated slashes for Platform file path
MIPS: fix *-pkg builds for loongson2ef platform
PCI: brcmstb: Allow building for BMIPS_GENERIC
MIPS: BMIPS: Enable PCI Kconfig
MIPS: VDSO: remove -nostdlib compiler flag
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
MIPS: Update bmips_stb_defconfig
MIPS: Allow modules to set board_be_handler
Ian Rogers [Thu, 4 Nov 2021 06:41:53 +0000 (23:41 -0700)]
perf test: Add test case struct.
Add a test case struct mirroring the 'struct kunit_case'. Use the struct
with the DEFINE_SUITE macro, where the single test is turned into a test
case. Update the helpers in builtin-test to handle test cases.
Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211104064208.3156807-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 4 Nov 2021 06:41:49 +0000 (23:41 -0700)]
perf test: Make each test/suite its own struct.
By switching to an array of pointers to tests (later to be suites)
the definition of the tests can be moved to the file containing the
tests.
Committer notes:
It's "&vectors_page", not "&vectors_pages", noticed when cross building
to 32-bit ARM.
Also the DEFINE_SUITE(vectors_page) should be done where its function is
implemented, in tools/perf/arch/arm/tests/vectors-page.c, so that we can
make it static, as we don't have anymore its declaration in tests.h.
Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211104064208.3156807-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cifs: do not duplicate fscache cookie for secondary channels
We allocate index cookies for each connection from the client.
However, we don't need this index for each channel in case of
multichannel. So making sure that we avoid creating duplicate
cookies by instantiating only for primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: connect individual channel servers to primary channel server
Today, we don't have any way to get the smb session for any
of the secondary channels. Introducing a pointer to the primary
server from server struct of any secondary channel. The value will
be NULL for the server of the primary channel. This will enable us
to get the smb session for any channel.
This will be needed for some of the changes that I'm planning
to make soon.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: protect session channel fields with chan_lock
Introducing a new spin lock to protect all the channel related
fields in a cifs_ses struct. This lock should be taken
whenever dealing with the channel fields, and should be held
only for very short intervals which will not sleep.
Currently, all channel related fields in cifs_ses structure
are protected by session_mutex. However, this mutex is held for
long periods (sometimes while waiting for a reply from server).
This makes the codepath quite tricky to change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
cifs: do not negotiate session if session already exists
In cifs_get_smb_ses, if we find an existing matching session,
we should not send a negotiate request for the session if a
session reconnect is not necessary.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>