Looks like kunit_test_init_section_suites(...) was messed up in a merge
conflict. This fixes it.
kunit_test_init_section_suites(...) was not updated to avoid the extra
level of indirection when .kunit_test_suites was flattened. Given no-one
was actively using it, this went unnoticed for a long period of time.
Fixes: 8e4bd75f139c ("kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites") Signed-off-by: Brendan Higgins <brendan.higgins@linux.dev> Signed-off-by: David Gow <davidgow@google.com> Tested-by: Martin Fernandez <martin.fernandez@eclypsium.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When validating drafted SPDK ublk target, in a case that
assigning large queue depth to multiqueue ublk device,
ublk target would run into a weird incorrect state. During
rounds of review and debug, An overflow bug was found
in ublk driver.
In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means
each ublk queue depth can be set as large as 4096. But
when setting qd for a ublk device,
sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io)
will be larger than 65535 if qd is larger than 2728.
Then queue_size is overflowed, and ublk_get_queue()
references a wrong pointer position. The wrong content of
ublk_queue elements will lead to out-of-bounds memory
access.
Extend queue_size in ublk_device as "unsigned int".
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com> Fixes: c72ffe88841a ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230131070552.115067-1-xiaodong.liu@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using a xfrm interface in a bridged setup (the outgoing device is
bridged), the incoming packets in the xfrm interface are only tracked
in the outgoing direction.
If br_netfilter is enabled, the first (encrypted) packet is received onR
eth1, conntrack hooks are called from br_netfilter emulation which
allocates nf_bridge info for this skb.
If the packet is for local machine, skb gets passed up the ip stack.
The skb passes through ip prerouting a second time. br_netfilter
ip_sabotage_in supresses the re-invocation of the hooks.
After this, skb gets decrypted in xfrm layer and appears in
network stack a second time (after decryption).
Then, ip_sabotage_in is called again and suppresses netfilter
hook invocation, even though the bridge layer never called them
for the plaintext incarnation of the packet.
Free the bridge info after the first suppression to avoid this.
I was unable to figure out where the regression comes from, as far as i
can see br_netfilter always had this problem; i did not expect that skb
is looped again with different headers.
Fixes: b4fb8285a1ee ("netfilter: avoid using skb->nf_bridge directly") Reported-and-tested-by: Wolfgang Nothdurft <wolfgang@linogate.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch static analysis tool detects that acquired lock is not released
in hwdep device when condition branch is passed due to no event. It is
unlikely to occur, while fulfilling is preferable for better coding.
tls_is_tx_ready() checks that list_first_entry() does not return NULL.
This condition can never happen. For empty lists, list_first_entry()
returns the list_entry() of the head, which is a type confusion.
Use list_first_entry_or_null() which returns NULL in case of empty
lists.
The debugfs dump of requests was confused about what state requires
the execlist lock versus the GuC lock. There was also a bunch of
duplicated messy code between it and the error capture code.
So refactor the hung request search into a re-usable function. And
reduce the span of the execlist state lock to only the execlist
specific code paths. In order to do that, also move the report of hold
count (which is an execlist only concept) from the top level dump
function to the lower level execlist specific function. Also, move the
execlist specific code into the execlist source file.
v2: Rename some functions and move to more appropriate files (Daniele).
v3: Rename new execlist dump function (Daniele)
Fixes: ffb7fdae4c72 ("drm/i915/guc: Fix for error capture after full GPU reset with GuC") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-4-John.C.Harrison@Intel.com
(cherry picked from commit a4be3dca53172d9d2091e4b474fb795c81ed3d6c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
Fixes: ffb7fdae4c72 ("drm/i915/guc: Fix for error capture after full GPU reset with GuC") Fixes: 674632970f3d ("drm/i915/guc: Capture error state on context reset") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com
(cherry picked from commit 3700e353781e27f1bc7222f51f2cc36cbeb9b4ec) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
intel_guc_find_hung_context() was not acquiring the correct spinlock
before searching the request list. So fix that up. While at it, add
some extra whitespace padding for readability.
Fixes: ffb7fdae4c72 ("drm/i915/guc: Fix for error capture after full GPU reset with GuC") Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Michael Cheng <michael.cheng@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Bruce Chang <yu.bruce.chang@intel.com> Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-2-John.C.Harrison@Intel.com
(cherry picked from commit d1c3717501bcf56536e8b8c1bdaf5cd5357f6bb2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Every power mode of static power slider has its own AC and DC power
settings.
When the power source changes from AC to DC, corresponding DC thermals
were not updated from PMF config store and this leads the system to always
run on AC power settings.
Fix it by registering with power_supply notifier and apply DC settings
upon getting notified by the power_supply handler.
Fixes: f3e11f9f79fe ("platform/x86/amd/pmf: Add support for PMF core layer") Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add helper routine to check if the current platform profile
is balanced mode and remove duplicate code occurrences.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-3-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: f21bf62290dd ("platform/x86/amd/pmf: Fix to update SPS thermals when power supply change") Signed-off-by: Sasha Levin <sashal@kernel.org>
By design PMF static slider will be set to BALANCED during
init, but updating to corresponding thermal values from
the PMF config store was missed, leading to improper settings
getting propagated to PMFW.
Fixes: 30b525aaebb7 ("platform/x86/amd/pmf: Add support SPS PMF feature") Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-5-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add helper routine to update the static slider information
and remove the duplicate code occurrences after this change.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Stable-dep-of: 635f79bc73cf ("platform/x86/amd/pmf: Fix to update SPS default pprof thermals") Signed-off-by: Sasha Levin <sashal@kernel.org>
Auto-mode thermal limits should be updated only after receiving the AMT
event. But due to a bug in the older commit, these settings were getting
applied during the auto-mode init.
Fix this by removing amd_pmf_set_automode() during auto-mode
initialization.
Fixes: 8b74ceda9840 ("platform/x86/amd/pmf: Add support for Auto mode feature") Suggested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-4-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The freeing of relinquished volume will wake up the pending volume
acquisition by using wake_up_bit(), however it is mismatched with
wait_var_event() used in fscache_wait_on_volume_collision() and it will
never wake up the waiter in the wait-queue because these two functions
operate on different wait-queues.
According to the implementation in fscache_wait_on_volume_collision(),
if the wake-up of pending acquisition is delayed longer than 20 seconds
(e.g., due to the delay of on-demand fd closing), the first
wait_var_event_timeout() will timeout and the following wait_var_event()
will hang forever as shown below:
Considering that wake_up_bit() is more selective, so fix it by using
wait_on_bit() instead of wait_var_event() to wait for the freeing of
relinquished volume. In addition because waitqueue_active() is used in
wake_up_bit() and clear_bit() doesn't imply any memory barrier, use
clear_and_wake_up_bit() to add the missing memory barrier between
cursor->flags and waitqueue_active().
Fixes: 3322bea87b89 ("fscache: Implement volume registration") Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20230113115211.2895845-2-houtao@huaweicloud.com/ Signed-off-by: Sasha Levin <sashal@kernel.org>
If you call listen() and accept() on an already connect()ed
AF_NETROM socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and nr_accept() dequeues
the skb waiting in the sk->sk_receive_queue.
As a result, nr_accept() allocates and returns a sock with
the sk of the parent AF_NETROM socket.
KASAN report by syzbot:
```
BUG: KASAN: use-after-free in nr_release+0x66/0x460 net/netrom/af_netrom.c:520
Write of size 4 at addr ffff8880235d8080 by task syz-executor564/5128
After commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'"),
bic->bfqq will be accessed in bic_set_bfqq(), however, in some context
bic->bfqq will be freed, and bic_set_bfqq() is called with the freed
bic->bfqq.
Fix the problem by always freeing bfqq after bic_set_bfqq().
Fixes: 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230130014136.591038-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
For PCI devices the Runtime PM refcount is incremented twice:
1. During device enumeration with a call to pm_runtime_forbid.
2. Just before a driver probe logic is called.
Because of that in order to enable Runtime PM on a given device
we have to call both pm_runtime_allow and pm_runtime_put_noidle,
once it's ready to be runtime suspended.
The former was missing causing the pm refcount to never reach 0.
Fixes: 04c72a7cbc38 ("net: wwan: t7xx: Runtime PM") Signed-off-by: Kornel Dulęba <mindal@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe() function is only used for the DP83822 PHY, leaving the
private data pointer uninitialized for the smaller DP83825/26 models.
While all uses of the private data structure are hidden in 82822 specific
callbacks, configuring the interrupt is shared across all models.
This causes a NULL pointer dereference on the smaller PHYs as it accesses
the private data unchecked. Verifying the pointer avoids that.
Fixes: b0f7bf02bef7 ("net: phy: DP83822: Add ability to advertise Fiber connection") Signed-off-by: Andre Kalb <andre.kalb@sma.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/Y9FzniUhUtbaGKU7@pc6682 Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent sfc NICs are TSO capable for some tunnel protocols. However, it
was not working properly because the feature was not advertised in
hw_enc_features, but in hw_features only.
Setting up a GENEVE tunnel and using iperf3 to send IPv4 and IPv6 traffic
to the tunnel show, with tcpdump, that the IPv4 packets still had ~64k
size but the IPv6 ones had only ~1500 bytes (they had been segmented by
software, not offloaded). With this patch segmentation is offloaded as
expected and the traffic is correctly received at the other end.
Fixes: 78f9dcd3a7aa ("sfc: advertise encapsulated offloads on EF10") Reported-by: Tianhao Zhao <tizhao@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230125143513.25841-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
GSO should not merge page pool recycled frames with standard reference
counted frames. Traditionally this didn't occur, at least not often.
However as we start looking at adding support for wireless adapters there
becomes the potential to mix the two due to A-MSDU repartitioning frames in
the receive path. There are possibly other places where this may have
occurred however I suspect they must be few and far between as we have not
seen this issue until now.
Fixes: 2c6f2cc5b8f3 ("page_pool: add frag page recycling support in page pool") Reported-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/167475990764.1934330.11960904198087757911.stgit@localhost.localdomain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
The PF controls the set of queues that the RDMA auxiliary_driver requests
resources from. The set_channel command will alter that pool and trigger a
reconfiguration of the VSI, which breaks RDMA functionality.
Prevent set_channel from executing when RDMA driver bound to auxiliary
device.
Adding a locked variable to pass down the call chain to avoid double
locking the device_lock.
Fixes: f316c8300c2f ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
"""
Since "vhost/scsi: fix reuse of &vq->iov[out] in response"
we have this:
cmd->tvc_resp_iov = vq->iov[vc.out];
cmd->tvc_in_iovs = vc.in;
combined with
iov_iter_init(&iov_iter, ITER_DEST, &cmd->tvc_resp_iov,
cmd->tvc_in_iovs, sizeof(v_rsp));
in vhost_scsi_complete_cmd_work(). We used to have ->tvc_resp_iov
_pointing_ to vq->iov[vc.out]; back then iov_iter_init() asked to
set an iovec-backed iov_iter over the tail of vq->iov[], with
length being the amount of iovecs in the tail.
Now we have a copy of one element of that array. Fortunately, the members
following it in the containing structure are two non-NULL kernel pointers,
so copy_to_iter() will not copy anything beyond the first iovec - kernel
pointer is not (on the majority of architectures) going to be accepted by
access_ok() in copyout() and it won't be skipped since the "length" (in
reality - another non-NULL kernel pointer) won't be zero.
So it's not going to give a guest-to-qemu escalation, but it's definitely
a bug. Frankly, my preference would be to verify that the very first iovec
is long enough to hold rsp_size. Due to the above, any users that try to
give us vq->iov[vc.out].iov_len < sizeof(struct virtio_scsi_cmd_resp)
would currently get a failure in vhost_scsi_complete_cmd_work()
anyway.
"""
However, the spec doesn't say anything about the legacy descriptor
layout for the respone. So this patch tries to not assume the response
to reside in a single separate descriptor which is what commit 1b68b4c6de34 ("vhost/scsi: Convert completion path to use") tries to
achieve towards to ANY_LAYOUT.
This is done by allocating and using dedicate resp iov in the
command. To be safety, start with UIO_MAXIOV to be consistent with the
limitation that we advertise to the vhost_get_vq_desc().
Testing with the hacked virtio-scsi driver that use 1 descriptor for 1
byte in the response.
Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin Coddington <bcodding@redhat.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: 40740e510a94 ("vhost/scsi: fix reuse of &vq->iov[out] in response") Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119073647.76467-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response") Signed-off-by: Sasha Levin <sashal@kernel.org>
When the vhost iotlb is used along with a guest virtual iommu
and the guest gets rebooted, some MISS messages may have been
recorded just before the reboot and spuriously executed by
the virtual iommu after the reboot.
As vhost does not have any explicit reset user API,
VHOST_NET_SET_BACKEND looks a reasonable point where to clear
the pending messages, in case the backend is removed.
Export vhost_clear_msg() and call it in vhost_net_set_backend()
when fd == -1.
Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Jason Wang <jasowang@redhat.com> Fixes: ac35b12314c73 ("vhost: new device IOTLB API")
Message-Id: <20230117151518.44725-3-eric.auger@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We change recently the memalloc helper to use
dma_alloc_noncontiguous() and the fallback to get_pages(). Although
lots of issues with IOMMU (or non-IOMMU) have been addressed, but
there seems still a regression on Xen PV. Interestingly, the only
proper way to work is use dma_alloc_coherent(). The use of
dma_alloc_coherent() for SG buffer was dropped as it's problematic on
IOMMU systems. OTOH, Xen PV has a different way, and it's fine to use
the dma_alloc_coherent().
This patch is a workaround for Xen PV. It consists of the following
changes:
- For Xen PV, use only the fallback allocation without
dma_alloc_noncontiguous()
- In the fallback allocation, use dma_alloc_coherent();
the DMA address from dma_alloc_coherent() is returned in get_addr
ops
- The DMA addresses are stored in an array; the first entry stores the
number of allocated pages in lower bits, which are referred at
releasing pages again
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: 23e67f1662bb ("ALSA: memalloc: Revive x86-specific WC page allocations again") Fixes: 406c2274c602 ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU") Link: https://lore.kernel.org/r/87tu256lqs.wl-tiwai@suse.de Link: https://lore.kernel.org/r/20230125153104.5527-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kernel crash was caused by a BPF program attached to the
"lsm_cgroup/socket_sock_rcv_skb" hook, which performed a call to
`bpf_setsockopt()` in order to set the TCP_NODELAY flag as an
example. Flags like TCP_NODELAY can prompt the kernel to flush a
socket's outgoing queue, and this hook
"lsm_cgroup/socket_sock_rcv_skb" is frequently triggered by
softirqs. The issue was that in certain circumstances, when
`tcp_write_xmit()` was called to flush the queue, it would also allow
BH (bottom-half) to run. This could lead to our program attempting to
flush the same socket recursively, which caused a `skbuff` to be
unlinked twice.
`security_sock_rcv_skb()` is triggered by `tcp_filter()`. This occurs
before the sock ownership is checked in `tcp_v4_rcv()`. Consequently,
if a bpf program runs on `security_sock_rcv_skb()` while under softirq
conditions, it may not possess the lock needed for `bpf_setsockopt()`,
thus presenting an issue.
The patch fixes this issue by ensuring that a BPF program attached to
the "lsm_cgroup/socket_sock_rcv_skb" hook is not allowed to call
`bpf_setsockopt()`.
The differences from v1 are
- changing commit log to explain holding the lock of the sock,
- emphasizing that TCP_NODELAY is not the only flag, and
- adding the fixes tag.
Not all targets that return PQ=1 and PDT=0 should be ignored. While
the SCSI spec is vague in this department, there appears to be a
critical mass of devices which rely on devices being accessible with
this combination of reported values.
Fixes: 0e5a09fed91b ("scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT") Link: https://lore.kernel.org/r/yq1lelrleqr.fsf@ca-mkp.ca.oracle.com Acked-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Martin Wilck <mwilck@suse.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit b7a39ff6ae4c ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
According section
8.2.5.313 Select Input Register (IOMUXC_UART1_RXD_SELECT_INPUT)
of
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
the required setting for this specific pin configuration is "1"
A listening socket linked to a sockmap has its sk_prot overridden. It
points to one of the struct proto variants in tcp_bpf_prots. The variant
depends on the socket's family and which sockmap programs are attached.
A child socket cloned from a TCP listener initially inherits their sk_prot.
But before cloning is finished, we restore the child's proto to the
listener's original non-tcp_bpf_prots one. This happens in
tcp_create_openreq_child -> tcp_bpf_clone.
Today, in tcp_bpf_clone we detect if the child's proto should be restored
by checking only for the TCP_BPF_BASE proto variant. This is not
correct. The sk_prot of listening socket linked to a sockmap can point to
to any variant in tcp_bpf_prots.
If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then
the child socket unintentionally is left if the inherited sk_prot by
tcp_bpf_clone.
This leads to issues like infinite recursion on close [1], because the
child state is otherwise not set up for use with tcp_bpf_prot operations.
Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants.
Note that it wouldn't be sufficient to check the socket state when
overriding the sk_prot in tcp_bpf_update_proto in order to always use the
TCP_BPF_BASE variant for listening sockets. Since commit fd501ed9752b ("bpf, sockmap: Remove unhash handler for BPF sockmap usage")
it is possible for a socket to transition to TCP_LISTEN state while already
linked to a sockmap, e.g. connect() -> insert into map ->
connect(AF_UNSPEC) -> listen().
The "id" comes from the user. Change the type to unsigned to prevent
an array underflow.
Fixes: 21a6ecae5308 ("ASoC: SOF: ipc4: Add support for mtrace log extraction") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/Y8laruWOEwOC/dx9@kili Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When use tools/testing/selftests/kselftest_install.sh to make the
kselftest-list.txt under tools/testing/selftests/kselftest_install.
Then use tools/testing/selftests/kselftest_install/run_kselftest.sh to run
all the kselftests in kselftest-list.txt, it will be blocked by case
"filesystems/fat: run_fat_tests.sh" with "Warning: file run_fat_tests.sh
is not executable", so grant executable permission to run_fat_tests.sh to
fix this issue.
Register range information is copied in several places. The intent is
to transfer range/id information from one register/stack spill to
another. Currently this is done using direct register assignment, e.g.:
This example is unsafe because 64-bit write to fp[-8] at (5) is
conditional, thus not all bytes of fp[-8] are guaranteed to be set
when it is read at (8). However, currently the example passes
verification.
First, the execution path 1-10 is examined by verifier.
Suppose that a new checkpoint is created by is_state_visited() at (6).
After checkpoint creation:
- r1.parent points to checkpoint.r1,
- fp[-8].parent points to checkpoint.fp[-8].
At (6) the r1.live is set to REG_LIVE_WRITTEN.
At (7) the fp[-8].parent is set to r1.parent and fp[-8].live is set to
REG_LIVE_WRITTEN, because of the following code called in
check_stack_write_fixed_off():
static void save_register_state(struct bpf_func_state *state,
int spi, struct bpf_reg_state *reg,
int size)
{
...
state->stack[spi].spilled_ptr = *reg; // <--- parent & live copied
if (size == BPF_REG_SIZE)
state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
...
}
Note the intent to mark stack spill as written only if 8 bytes are
spilled to a slot, however this intent is spoiled by a 'live' field copy.
At (8) the checkpoint.fp[-8] should be marked as REG_LIVE_READ but
this does not happen:
- fp[-8] in a current state is already marked as REG_LIVE_WRITTEN;
- fp[-8].parent points to checkpoint.r1, parentage chain is used by
mark_reg_read() to mark checkpoint states.
At (10) the verification is finished for path 1-10 and jump 4-6 is
examined. The checkpoint.fp[-8] never gets REG_LIVE_READ mark and this
spill is pruned from the cached states by clean_live_states(). Hence
verifier state obtained via path 1-4,6 is deemed identical to one
obtained via path 1-6 and program marked as safe.
Note: the example should be executed with BPF_F_TEST_STATE_FREQ flag
set to force creation of intermediate verifier states.
This commit revisits the locations where bpf_reg_state instances are
copied and replaces the direct copies with a call to a function
copy_register_state(dst, src) that preserves 'parent' and 'live'
fields of the 'dst'.
In current bpf_send_signal() and bpf_send_signal_thread() helper
implementation, irq_work is used to handle nmi context. Hao Sun
reported in [1] that the current task at the entry of the helper
might be gone during irq_work callback processing. To fix the issue,
a reference is acquired for the current task before enqueuing into
the irq_work so that the queued task is still available during
irq_work callback processing.
On shutdown reference to i915 driver needs to be released to not spam
logs with unnecessary warnings. While at it do some additional cleanup
to make sure DSP is powered down and interrupts from device are
disabled.
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: cbab75d32dfe ("ASoC: Intel: add machine driver for SOF+ES8336") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: c192292f7659 ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: dd67b0c66d86 ("ASoC: Intel: bytcr_rt5640: use HID translation util") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: c57fc288888e ("ASoC: Intel: bytcr_rt5651: add MCLK, quirks and cleanups") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-3-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 2aa8ab6193b2 ("ASoC: Intel: bytcht_es8316: fix HID handling") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230112112852.67714-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Theoretically the device might gone if its reference count drops to 0.
This might be the case when we try to find the first physical node of
the ACPI device. We need to keep reference to it until we get a result
of the above mentioned call. Refactor the code to drop the reference
count at the correct place.
While at it, move to acpi_dev_put() as symmetrical call to the
acpi_dev_get_first_match_dev().
Fixes: 4231009198d8 ("ASoC: amd: add Machine driver for Jadeite platform") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20230112112356.67643-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The following build warnings are seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: cts-gpios: False schema does not allow [[33, 3, 1]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dtb: serial@30860000: rts-gpios: False schema does not allow [[33, 5, 1]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
...
The imx8m Venice Gateworks boards do not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.
Fixes: ef5ba27c1b01 ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch is fix for Linux kernel v2.6.33 or later.
For request subaction to IEC 61883-1 FCP region, Linux FireWire subsystem
have had an issue of use-after-free. The subsystem allows multiple
user space listeners to the region, while data of the payload was likely
released before the listeners execute read(2) to access to it for copying
to user space.
The issue was fixed by a commit b17b4587c51a ("firewire: core: fix
use-after-free regression in FCP handler"). The object of payload is
duplicated in kernel space for each listener. When the listener executes
ioctl(2) with FW_CDEV_IOC_SEND_RESPONSE request, the object is going to
be released.
However, it causes memory leak since the commit relies on call of
release_request() in drivers/firewire/core-cdev.c. Against the
expectation, the function is never called due to the design of
release_client_resource(). The function delegates release task
to caller when called with non-NULL fourth argument. The implementation
of ioctl_send_response() is the case. It should release the object
explicitly.
Commit 240a867fe2ae ("net: Support GRO/GSO fraglist chaining.")
introduced UDP listifyed GRO. The segmentation relies on frag_list being
untouched when passing through the network stack. This assumption can be
broken sometimes, where frag_list itself gets pulled into linear area,
leaving frag_list being NULL. When this happens it can trigger
following NULL pointer dereference, and panic the kernel. Reverse the
test condition should fix it.
Fixes: 240a867fe2ae ("net: Support GRO/GSO fraglist chaining.") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/Y9gt5EUizK1UImEP@debian Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
adjusted the policy to enable wakeup by default if the ACPI tables
indicated that a device was wake capable.
It was reported however that this broke suspend on at least two System76
systems in S3 mode and two Lenovo Gen2a systems, but only with S3.
When the machines are set to s2idle, wakeup behaves properly.
Configuring the GPIOs for wakeup with S3 doesn't work properly, so only
set it when the system supports low power idle.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Fixes: 704d6b3e3c899 ("i2c: acpi: Use ACPI wake capability bit to set wake_irq") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2357 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2162013 Reported-by: Nathan Smythe <ncsmythe@scruboak.org> Tested-by: Nathan Smythe <ncsmythe@scruboak.org> Suggested-by: Raul Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NL5xRU there is a mistake in the ACPI tables that the
TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level
triggered but connected to a pull up. As soon as the system suspends the
touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 9.
Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Reported-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 Co-developed-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix this by initializing rc to 0 as cache_refresh_path() would not set
it in case of success.
Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202301190004.bEHvbKG6-lkp@intel.com/ Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the function sdma_load_context() fails, the sdma_desc will be
freed, but the allocated desc->bd is forgot to be freed.
We already met the sdma_load_context() failure case and the log as
below:
[ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready
...
In this case, the desc->bd will not be freed without this change.
Make sure calibration values are defined to prevent potential kernel
crashes. This fixes a hypothetical issue for virtual or clone devices
inspired by a similar fix for DS4.
GCC 11.1.0 and 11.2.0 generate a wrong warning when compiling the
kernel e.g. with allmodconfig:
arch/s390/kernel/setup.c: In function ‘setup_lowcore_dat_on’:
./include/linux/fortify-string.h:57:33: error: ‘__builtin_memcpy’ reading 128 bytes from a region of size 0 [-Werror=stringop-overread]
...
arch/s390/kernel/setup.c:526:9: note: in expansion of macro ‘memcpy’
526 | memcpy(abs_lc->cregs_save_area, S390_lowcore.cregs_save_area,
| ^~~~~~
This could be addressed by using absolute_pointer() with the
S390_lowcore macro, but this is not a good idea since this generates
worse code for performance critical paths.
Therefore simply use a for loop to copy the array in question and get
rid of the warning.
When there are no read queues read requests will be assigned a
default queue on allocation. However, blk_mq_get_cached_request() is not
prepared for that and will fail all attempts to grab read requests from
the cache. Worst case it doubles the number of requests allocated,
roughly half of which will be returned by blk_mq_free_plug_rqs().
It only affects batched allocations and so is io_uring specific.
For reference, QD8 t/io_uring benchmark improves by 20-35%.
The Acer Aspire 4810T predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.
Add a DMI quirk to use the native backlight interface which does
work properly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At unwind_start(), it is better to get its frame info here rather than
get them outside, even we don't have 'regs'. In this way we can simply
use unwind_{start, next_frame, done} outside.
When multiple interfaces are present in the local interface
list, new skb copy is taken before rx processing except for
the first interface. The address translation happens each
time only on the original skb since the hdr pointer is not
updated properly to the newly created skb.
As a result frames start to drop in userspace when address
based checks or search fails.
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
The following kernel panic can be triggered when a task with pid=1 attaches
a prog that attempts to send killing signal to itself, also see [1] for more
details:
Stale error status reported from a previous message transaction must be
cleared before starting a new transaction to avoid being confusingly
reported in the following SCMI message dump traces.
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected)
From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit
arithmetic and then passed as a 64 bit function argument. In the case where
i is 32 or more this can lead to an overflow. Avoid this by shifting
using the BIT_ULL macro instead.
Fixes: dcf8995f1468 ("perf/x86/amd: Constrain Large Increment per Cycle events") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
projects / kernel.git / log