Kieran Bingham [Fri, 18 May 2018 20:42:00 +0000 (16:42 -0400)]
media: vsp1: Use reference counting for bodies
Extend the display list body with a reference count, allowing bodies to
be kept as long as a reference is maintained. This provides the ability
to keep a cached copy of bodies which will not change, so that they can
be re-applied to multiple display lists.
Kieran Bingham [Fri, 18 May 2018 20:41:59 +0000 (16:41 -0400)]
media: vsp1: Convert display lists to use new body pool
Adapt the dl->body0 object to use an object from the body pool. This
greatly reduces the pressure on the TLB for IPMMU use cases, as all of
the lists use a single allocation for the main body.
The CLU and LUT objects pre-allocate a pool containing three bodies,
allowing a userspace update before the hardware has committed a previous
set of tables.
Bodies are no longer 'freed' in interrupt context, but instead released
back to their respective pools. This allows us to remove the garbage
collector in the DLM.
Kieran Bingham [Fri, 18 May 2018 20:41:58 +0000 (16:41 -0400)]
media: vsp1: Provide a body pool
Each display list allocates a body to store register values in a dma
accessible buffer from a dma_alloc_wc() allocation. Each of these
results in an entry in the IOMMU TLB, and a large number of display list
allocations adds pressure to this resource.
Reduce TLB pressure on the IPMMUs by allocating multiple display list
bodies in a single allocation, and providing these to the display list
through a 'body pool'. A pool can be allocated by the display list
manager or entities which require their own body allocations.
Kieran Bingham [Fri, 18 May 2018 20:41:57 +0000 (16:41 -0400)]
media: vsp1: Protect bodies against overflow
The body write function relies on the code never asking it to write more
than the entries available in the list.
Currently with each list body containing 256 entries, this is fine, but
we can reduce this number greatly saving memory. In preparation of this
add a level of protection to catch any buffer overflows.
Kieran Bingham [Fri, 18 May 2018 20:41:56 +0000 (16:41 -0400)]
media: vsp1: Reword uses of 'fragment' as 'body'
Throughout the codebase, the term 'fragment' is used to represent a
display list body. This term duplicates the 'body' which is already in
use.
The datasheet references these objects as a body, therefore replace all
mentions of a fragment with a body, along with the corresponding
pluralised terms.
Kieran Bingham [Fri, 18 May 2018 20:41:55 +0000 (16:41 -0400)]
media: vsp1: Move video suspend resume handling to video object
The suspend and resume handlers are only utilised by video pipelines,
yet the functions currently reside in the vsp1_pipe object.
This causes an issue with resume, as the functions incorrectly call
vsp1_pipeline_run() directly instead of processing the video object
through vsp1_video_pipeline_run().
Move the functions to the video object, renaming accordingly and update
the resume handler to call vsp1_video_pipeline_run() as appropriate.
Kieran Bingham [Fri, 18 May 2018 20:41:54 +0000 (16:41 -0400)]
media: vsp1: Release buffers for each video node
Commit 51d09d1d7198 ("media: v4l: vsp1: Release buffers in
start_streaming error path") introduced a helper to clean up buffers on
error paths, but inadvertently changed the code such that only the
output WPF buffers were cleaned, rather than the video node being
operated on.
Since then vsp1_video_cleanup_pipeline() has grown to perform both video
node cleanup, as well as pipeline cleanup. Split the implementation into
two distinct functions that perform the required work, so that each
video node can release its buffers correctly on streamoff. The pipe
cleanup that was performed in the vsp1_video_stop_streaming() (releasing
the pipe->dl) is moved to the function for clarity.
Hans Verkuil [Tue, 15 May 2018 08:50:05 +0000 (04:50 -0400)]
media: adv7511: fix clearing of the CEC receive buffer
The CEC receive buffer was not always cleared correctly. The
datasheet was a bit confusing since sometimes it mentioned that the
bit in CEC register 0x4a had to be toggled, and sometimes it suggested
it was a 'Clear-on-write' bit. But it really needs to be toggled.
The patch also enables/disables the CEC irqs after the other irq are
enabled/disabled instead of doing it before. It may not matter, but it
feels more logical to do it in that order, and the implementation that
we (Cisco) have used until now and that is known to be reliable also
did it in that order.
Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 May 2018 13:09:37 +0000 (09:09 -0400)]
media: soc_camera: fix compiler warning
In function 'strncpy',
inlined from 'soc_camera_platform_probe' at drivers/media/platform/soc_camera/soc_camera_platform.c:162:2:
include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 May 2018 13:08:52 +0000 (09:08 -0400)]
media: renesas-ceu: fix compiler warning
In function 'strncpy',
inlined from 'ceu_notify_complete' at drivers/media/platform/renesas-ceu.c:1378:2:
include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 11 bytes from a string of the same length [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hans Verkuil [Mon, 14 May 2018 13:01:25 +0000 (09:01 -0400)]
media: imx: fix compiler warning
drivers/staging/media/imx/imx-media-capture.c: In function 'vidioc_querycap':
drivers/staging/media/imx/imx-media-capture.c:76:2: warning: 'strncpy' output truncated copying 15 bytes from a string of length 17 [-Wstringop-truncation]
strncpy(cap->driver, "imx-media-capture", sizeof(cap->driver) - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 May 2018 12:57:03 +0000 (08:57 -0400)]
media: hdpvr: fix compiler warning
In function 'strncpy',
inlined from 'vidioc_g_audio' at media-git/drivers/media/usb/hdpvr/hdpvr-video.c:876:2:
media-git/include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 May 2018 12:53:39 +0000 (08:53 -0400)]
media: s5p-mfc: fix two sparse warnings
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c: In function 'vidioc_querycap':
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c:1317:2: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
strncpy(cap->card, dev->vfd_enc->name, sizeof(cap->card) - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c: In function 'vidioc_querycap':
media-git/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c:275:2: warning: 'strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
strncpy(cap->card, dev->vfd_dec->name, sizeof(cap->card) - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hans Verkuil [Mon, 14 May 2018 12:51:44 +0000 (08:51 -0400)]
media: zoran: fix compiler warning
In file included from media-git/include/linux/bitmap.h:9,
from media-git/include/linux/cpumask.h:12,
from media-git/arch/x86/include/asm/cpumask.h:5,
from media-git/arch/x86/include/asm/msr.h:11,
from media-git/arch/x86/include/asm/processor.h:21,
from media-git/arch/x86/include/asm/cpufeature.h:5,
from media-git/arch/x86/include/asm/thread_info.h:53,
from media-git/include/linux/thread_info.h:38,
from media-git/arch/x86/include/asm/preempt.h:7,
from media-git/include/linux/preempt.h:81,
from media-git/include/linux/spinlock.h:51,
from media-git/include/linux/seqlock.h:36,
from media-git/include/linux/time.h:6,
from media-git/include/linux/stat.h:19,
from media-git/include/linux/module.h:10,
from media-git/drivers/staging/media/zoran/zoran_driver.c:44:
In function 'strncpy',
inlined from 'zoran_querycap' at media-git/drivers/staging/media/zoran/zoran_driver.c:1512:2:
media-git/include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 31 bytes from a string of length 31 [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Mon, 14 May 2018 12:37:17 +0000 (08:37 -0400)]
media: go7007: fix two sparse warnings
drivers/media/usb/go7007/go7007-v4l2.c:637:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
drivers/media/usb/go7007/go7007-fw.c:1507:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Luca Ceresoli [Mon, 14 May 2018 11:27:24 +0000 (07:27 -0400)]
media: docs: clarify relationship between crop and selection APIs
Having two somewhat similar and largely overlapping APIs is confusing,
especially since the older one appears in the docs before the newer
and most featureful counterpart.
Clarify all of this in several ways:
- swap the two sections
- give a name to the two APIs in the section names
- add a note at the beginning of the CROP API section
- update note about VIDIOC_CROPCAP
Also remove a note that is incorrect (correct wording is in
vidioc-cropcap.rst).
Hans Verkuil [Fri, 11 May 2018 16:43:57 +0000 (12:43 -0400)]
media: zoran: move to staging in preparation for removal
This driver hasn't been tested in a long, long time. The hardware is
ancient and pretty much obsolete. This driver also needs to be converted
to newer media frameworks (vb2!) but due to the lack of time and interest
that is unlikely to happen.
So this driver is a prime candidate for removal. If someone is interested
in working on this driver to prevent its removal, then please contact the
linux-media mailinglist.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Laurent Pinchart [Fri, 11 May 2018 14:04:34 +0000 (10:04 -0400)]
media: i2c: adv748x: Fix pixel rate values
The pixel rate, as reported by the V4L2_CID_PIXEL_RATE control, must
include both horizontal and vertical blanking. Both the AFE and HDMI
receiver program it incorrectly:
- The HDMI receiver goes to the trouble of removing blanking to compute
the rate of active pixels. This is easy to fix by removing the
computation and returning the incoming pixel clock rate directly.
- The AFE performs similar calculation, while it should simply return
the fixed pixel rate for analog sources, mandated by the ADV748x to be
14.3180180 MHz.
Ezequiel Garcia [Fri, 11 May 2018 00:17:20 +0000 (20:17 -0400)]
media: usbtv: Implement wait_prepare and wait_finish
This driver is currently specifying a vb2_queue lock,
which means it straightforward to implement wait_prepare
and wait_finish.
Having these callbacks releases the queue lock while blocking,
which improves latency by allowing for example streamoff
or qbuf operations while waiting in dqbuf.
media: imx274: remove unused data from struct imx274_frmfmt
struct imx274_frmfmt is instantiated only in the imx274_formats[]
array, where imx274_formats[N].mode always equals N (via enum
imx274_mode). So .mode carries no information, and unsurprisingly it
is never used.
mbus_code is never used because the 12 bit modes are not implemented.
The colorspace member is also never used, which is normal since the
imx274 sensor can output only one colorspace.
Colin Ian King [Wed, 25 Apr 2018 15:04:21 +0000 (11:04 -0400)]
media: smiapp: fix timeout checking in smiapp_read_nvm
The current code decrements the timeout counter i and the end of
each loop i is incremented, so the check for timeout will always
be false and hence the timeout mechanism is just a dead code path.
Potentially, if the RD_READY bit is not set, we could end up in
an infinite loop.
Fix this so the timeout starts from 1000 and decrements to zero,
if at the end of the loop i is zero we have a timeout condition.
Detected by CoverityScan, CID#1324008 ("Logically dead code")
Fixes: 0a0611f78092 ("[media] smiapp: Add driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 16 Apr 2018 12:36:55 +0000 (08:36 -0400)]
media: ov5640: Add horizontal and vertical totals
All the initialization arrays are changing the horizontal and vertical
totals for some value.
In order to clean up the driver, and since we're going to need that value
later on, let's introduce in the ov5640_mode_info structure the horizontal
and vertical total sizes, and move these out of the bytes array.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 16 Apr 2018 12:36:53 +0000 (08:36 -0400)]
media: ov5640: Init properly the SCLK dividers
The SCLK and SCLK2X dividers are fixed in stone in the initialization
array. Let's make explicit what we're doing and move that away from the
huge array to the initialization code.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 16 Apr 2018 12:36:52 +0000 (08:36 -0400)]
media: ov5640: Don't force the auto exposure state at start time
The sensor needs to have the auto exposure stopped while changing mode.
However, when the new mode is set, the driver will force the auto exposure
on, disregarding whether the control has been changed or not.
Bypass the controls code entirely to do that, and only use the control
value cached when restoring the auto exposure mode.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Akinobu Mita [Sat, 10 Feb 2018 15:28:38 +0000 (10:28 -0500)]
media: ov2640: make s_ctrl() work in power-down mode
The s_ctrl() operation can be called when the device is placed into
power down mode. Then, applying controls to H/W should be postponed at
this time. Instead the controls will be restored when the streaming is
started.
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Akinobu Mita [Sat, 10 Feb 2018 15:28:37 +0000 (10:28 -0500)]
media: ov2640: make set_fmt() work in power-down mode
The set_fmt() subdev pad operation for this driver currently does not
only do the driver internal format selection but also do the actual
register setup.
This doesn't work if the device power control via GPIO lines is enabled.
Because the set_fmt() can be called when the device is placed into power
down mode.
First of all, this fix adds flag to keep track of whether the device starts
streaming or not. Then, the set_fmt() postpones applying the actual
register setup at this time. Instead the setup will be applied when the
streaming is started.
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Tue, 24 Apr 2018 10:25:47 +0000 (06:25 -0400)]
media: ov5640: Use dev_fwnode() to obtain device's fwnode
Use dev_fwnode() on the device instead of getting an fwnode handle of the
device's OF node. The result is the same on OF-based systems and looks
better, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: drm: rcar-du: Add support for CRC computation
Implement CRC computation configuration and reporting through the DRM
debugfs-based CRC API. The CRC source can be configured to any input
plane or the pipeline output.
Laurent Pinchart [Thu, 30 Nov 2017 14:45:20 +0000 (09:45 -0500)]
media: v4l: vsp1: Integrate DISCOM in display pipeline
The DISCOM is used to compute CRCs on display frames. Integrate it in
the display pipeline at the output of the blending unit to process
output frames.
Computing CRCs on input frames is possible by positioning the DISCOM at
a different point in the pipeline. This use case isn't supported at the
moment and could be implemented by extending the API between the VSP1
and DU drivers if needed.
Laurent Pinchart [Mon, 27 Nov 2017 20:45:42 +0000 (15:45 -0500)]
media: v4l: vsp1: Add support for the DISCOM entity
The DISCOM calculates a CRC on a configurable window of the frame. It
interfaces to the VSP through the UIF glue, hence the name used in the
code.
The module supports configuration of the CRC window through the crop
rectangle on the sink pad of the corresponding entity. However, unlike
the traditional V4L2 subdevice model, the crop rectangle does not
influence the format on the source pad.
Modeling the DISCOM as a sink-only entity would allow adhering to the
V4L2 subdevice model at the expense of more complex code in the driver,
as at the hardware level the UIF is handled as a sink+source entity. As
the DISCOM is only present in R-Car Gen3 VSP-D and VSP-DL instances it
is not exposed to userspace through V4L2 but controlled through the DU
driver. We can thus change this model later if needed without fear of
affecting userspace.
media: v4l: vsp1: Extend the DU API to support CRC computation
Add a parameter (in the form of a structure to ease future API
extensions) to the VSP atomic flush handler to pass CRC source
configuration, and pass the CRC value to the completion callback.
Laurent Pinchart [Tue, 28 Nov 2017 00:27:32 +0000 (19:27 -0500)]
media: v4l: vsp1: Reset the crop and compose rectangles in the set_fmt helper
To make vsp1_subdev_set_pad_format() usable by entities that support
selection rectangles, we need to reset the crop and compose rectangles
when setting the format on the sink pad. Do so and replace the custom
set_fmt implementation of the histogram code by a call to
vsp1_subdev_set_pad_format().
Resetting the crop and compose rectangles for entities that don't
support crop and compose has no adverse effect as the rectangles are
ignored anyway.
Adopt the SPDX license identifier headers to ease license compliance
management. All files in the driver are licensed under the GPLv2+ except
for the vsp1_regs.h file which is licensed under the GPLv2. This is
likely an oversight, but fixing this requires contacting the copyright
owners and is out of scope for this patch.
While at it fix the file descriptions to match file names where copy and
paste error occurred.
The Cadence MIPI-CSI2 TX controller is an hardware block meant to be used
as a bridge between pixel interfaces and a CSI-2 bus.
It supports operating with an internal or external D-PHY, with up to 4
lanes, or without any D-PHY. The current code only supports the latter
case.
While the virtual channel input on the pixel interface can be directly
mapped to CSI2, the datatype input is actually a selection signal (3-bits)
mapping to a table of up to 8 preconfigured datatypes/formats (programmed
at start-up)
Maxime Ripard [Fri, 4 May 2018 14:08:09 +0000 (10:08 -0400)]
media: dt-bindings: media: Add Cadence MIPI-CSI2 TX Device Tree bindings
The Cadence MIPI-CSI2 TX controller is a CSI2 bridge that supports up to 4
video streams and can output on up to 4 CSI-2 lanes, depending on the
hardware implementation.
It can operate with an external D-PHY, an internal one or no D-PHY at all
in some configurations.
Acked-by: Benoit Parrot <bparrot@ti.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Fri, 4 May 2018 14:08:07 +0000 (10:08 -0400)]
media: dt-bindings: media: Add Cadence MIPI-CSI2 RX Device Tree bindings
The Cadence MIPI-CSI2 RX controller is a CSI2RX bridge that supports up to
4 CSI-2 lanes, and can route the frames to up to 4 streams, depending on
the hardware implementation.
It can operate with an external D-PHY, an internal one or no D-PHY at all
in some configurations.
Acked-by: Rob Herring <robh@kernel.org> Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Wed, 9 May 2018 14:34:45 +0000 (17:34 +0300)]
media: staging: atomisp: Remove driver
The atomisp driver has a long list of todo items and little has been done
to address these lately while more has been added. The driver is also not
functional. In other words, the driver would not be getting out of staging
in the foreseeable future. At the same time it consumes developer
resources in order to maintain the flaky code base. Remove it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There are lots of data structs defined there but aren't used
anywhere.
Comment them out. Gets rid of those warnings:
drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c:1808:45: warning: 'mt9m114_entity_ops' defined but not used [-Wunused-const-variable=]
static const struct media_entity_operations mt9m114_entity_ops = {
^~~~~~~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c:35:0:
drivers/staging/media/atomisp/i2c/mt9m114.h:805:34: warning: 'mt9m114_iq' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_iq[] = {
^~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:797:34: warning: 'mt9m114_antiflicker_60hz' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_antiflicker_60hz[] = {
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:789:34: warning: 'mt9m114_antiflicker_50hz' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_antiflicker_50hz[] = {
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:682:34: warning: 'mt9m114_720_480P_init' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_720_480P_init[] = {
^~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:533:34: warning: 'mt9m114_960P_init' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_960P_init[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:518:34: warning: 'mt9m114_wakeup_reg' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_wakeup_reg[] = {
^~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:504:34: warning: 'mt9m114_streaming' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_streaming[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:497:34: warning: 'mt9m114_suspend' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_suspend[] = {
^~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.h:393:34: warning: 'mt9m114_exitstandby' defined but not used [-Wunused-const-variable=]
static struct misensor_reg const mt9m114_exitstandby[] = {
^~~~~~~~~~~~~~~~~~~
It seems that, originally, the logic would allow selecting between
fine and coarse integration. However, only coarse seems to be
implemented.
Get rid of this warning:
drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c: In function 'mt9m114_s_exposure':
drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c:1003:6: warning: variable 'exposure_local' set but not used [-Wunused-but-set-variable]
u16 exposure_local[3];
^~~~~~~~~~~~~~
media: atomisp-gc0310: return errors at gc0310_init()
If something wrong gets there, return the error.
Get rid of this warning:
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c: In function 'gc0310_init':
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:713:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
int ret;
^~~
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c: In function ‘__ov2680_set_exposure’:
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:400:10: warning: variable ‘hts’ set but not used [-Wunused-but-set-variable]
u16 vts,hts;
^~~
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c: In function ‘ov2680_detect’:
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:1164:5: warning: variable ‘revision’ set but not used [-Wunused-but-set-variable]
u8 revision;
^~~~~~~~
media: staging: atomisp: Comment out several unused sensor resolutions
The register settings for several resolutions aren't used
currently. So, comment them out.
Fix those warnings:
In file included from drivers/staging/media/atomisp/i2c/atomisp-gc2235.c:35:0:
drivers/staging/media/atomisp/i2c/gc2235.h:340:32: warning: 'gc2235_960_640_30fps' defined but not used [-Wunused-const-variable=]
static struct gc2235_reg const gc2235_960_640_30fps[] = {
^~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/gc2235.h:287:32: warning: 'gc2235_1296_736_30fps' defined but not used [-Wunused-const-variable=]
static struct gc2235_reg const gc2235_1296_736_30fps[] = {
^~~~~~~~~~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/i2c/atomisp-ov2722.c:35:0:
drivers/staging/media/atomisp/i2c/ov2722.h:999:32: warning: 'ov2722_720p_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2722_reg const ov2722_720p_30fps[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2722.h:787:32: warning: 'ov2722_1M3_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2722_reg const ov2722_1M3_30fps[] = {
^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2722.h:476:32: warning: 'ov2722_VGA_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2722_reg const ov2722_VGA_30fps[] = {
^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2722.h:367:32: warning: 'ov2722_480P_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2722_reg const ov2722_480P_30fps[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2722.h:257:32: warning: 'ov2722_QVGA_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2722_reg const ov2722_QVGA_30fps[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c: In function '__ov2680_set_exposure':
In file included from drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:35:0:
At top level:
drivers/staging/media/atomisp/i2c/ov2680.h:736:33: warning: 'ov2680_1616x1082_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_1616x1082_30fps[] = {
^~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:649:33: warning: 'ov2680_1456x1096_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_1456x1096_30fps[]= {
^~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:606:33: warning: 'ov2680_1296x976_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_1296x976_30fps[] = {
^~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:563:33: warning: 'ov2680_720p_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_720p_30fps[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:520:33: warning: 'ov2680_800x600_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_800x600_30fps[] = {
^~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:475:33: warning: 'ov2680_720x592_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_720x592_30fps[] = {
^~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:433:33: warning: 'ov2680_656x496_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_656x496_30fps[] = {
^~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:389:33: warning: 'ov2680_QVGA_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_QVGA_30fps[] = {
^~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:346:33: warning: 'ov2680_CIF_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_CIF_30fps[] = {
^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov2680.h:301:33: warning: 'ov2680_QCIF_30fps' defined but not used [-Wunused-const-variable=]
static struct ov2680_reg const ov2680_QCIF_30fps[] = {
^~~~~~~~~~~~~~~~~
In file included from drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c:36:0:
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:988:32: warning: 'ov5693_1424x1168_30fps' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_1424x1168_30fps[] = {
^~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:954:32: warning: 'ov5693_2592x1944_30fps' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_2592x1944_30fps[] = {
^~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:889:32: warning: 'ov5693_2592x1456_30fps' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_2592x1456_30fps[] = {
^~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:862:32: warning: 'ov5693_1940x1096' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_1940x1096[] = {
^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:796:32: warning: 'ov5693_1636p_30fps' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_1636p_30fps[] = {
^~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:758:32: warning: 'ov5693_1296x736' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_1296x736[] = {
^~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:730:32: warning: 'ov5693_976x556' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_976x556[] = {
^~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:672:32: warning: 'ov5693_736x496' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_736x496[] = {
^~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:643:32: warning: 'ov5693_192x160' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_192x160[] = {
^~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:616:32: warning: 'ov5693_368x304' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_368x304[] = {
^~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:587:32: warning: 'ov5693_336x256' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_336x256[] = {
^~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:540:32: warning: 'ov5693_1296x976' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_1296x976[] = {
^~~~~~~~~~~~~~~
drivers/staging/media/atomisp/i2c/ov5693/ov5693.h:509:32: warning: 'ov5693_654x496' defined but not used [-Wunused-const-variable=]
static struct ov5693_reg const ov5693_654x496[] = {
^~~~~~~~~~~~~~
media: staging: atomisp-gc2235: don't fill an unused var
The code with uses the dummy var is commented out. So,
coment out its definition/initialization.
Fix this warning:
drivers/staging/media/atomisp/i2c/atomisp-gc2235.c: In function 'gc2235_get_intg_factor':
drivers/staging/media/atomisp/i2c/atomisp-gc2235.c:249:26: warning: variable 'dummy' set but not used [-Wunused-but-set-variable]
u16 reg_val, reg_val_h, dummy;
^~~~~
Trivial fix to spelling mistake in ia_css_print message text
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: dvb_ca_en50221: prevent using slot_info for Spectre attacs
slot can be controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability,
as warned by smatch:
drivers/media/dvb-core/dvb_ca_en50221.c:1479 dvb_ca_en50221_io_write() warn: potential spectre issue 'ca->slot_info' (local cap)
Right now, the Siano's core uses GFP_DMA for both USB and
SDIO variants of the driver. There's no reason to use it
for USB. So, pass GFP_DMA as a parameter during sms core
register.
Matthias Reichl [Sun, 13 May 2018 11:24:31 +0000 (07:24 -0400)]
media: rc: ite-cir: lower timeout and extend allowed timeout range
The minimum possible timeout of ite-cir is 8 samples, which is
typically about 70us. The driver however changes the FIFO trigger
level from the hardware's default of 1 byte to 17 bytes, so the minimum
usable timeout value is 17 * 8 samples, which is typically about 1.2ms.
Tests showed that using timeouts down to 1.2ms actually work fine.
The current default timeout of 200ms is much longer than necessary and
the maximum timeout of 1s seems to have been chosen a bit arbitrarily.
So change the minimum timeout to the driver's limit of 17 * 8 samples
and bring timeout and maximum timeout in line with the settings
of many other receivers.
Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sean Young [Thu, 10 May 2018 10:14:38 +0000 (06:14 -0400)]
media: rc: decoders do not need to check for transitions
Drivers should never produce consecutive pulse or space raw events. Should
that occur, we would have bigger problems than this code is trying to
guard against.
Note that we already log an error should a driver misbehave.
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: dvb_frontend: cleanup some coding style errors
This is a core media file... it shoudn't have so many coding
style issues! The last patch ended by being submitted with
an error like that, very likely due to some cut and paste
issue.
Maybe it is time to clean it up. Do it with the auto
fix logic:
Max Kellermann [Thu, 3 May 2018 18:12:59 +0000 (14:12 -0400)]
media: dvbdev: add a mutex protecting the "mdev" pointer
During destruction, a race condition in
dvb_media_controller_disable_source() can cause a kernel crash,
because the "mdev" pointer has been read successfully while another
task executes dvb_usb_media_device_unregister(), which destroys the
object. Example for such a crash:
Hans Verkuil [Fri, 11 May 2018 14:57:07 +0000 (10:57 -0400)]
media: lgdt330x.h: fix compiler warning
Add missing 'inline' to fix this compiler warning:
In file included from drivers/media/common/b2c2/flexcop-fe-tuner.c:21:0:
drivers/media/dvb-frontends/lgdt330x.h:61:22: warning: 'lgdt330x_attach' defined but not used [-Wunused-function]
struct dvb_frontend *lgdt330x_attach(const struct lgdt330x_config *config,
^~~~~~~~~~~~~~~
Niklas Söderlund [Fri, 11 May 2018 14:41:26 +0000 (10:41 -0400)]
media: rcar-vin: fix crop and compose handling for Gen3
When refactoring the Gen3 enablement series crop and compose handling
where broken. This went unnoticed but can result in writing out side the
capture buffer. Fix this by restoring the crop and compose to reflect
the format dimensions as we have not yet enabled the scaler for Gen3.
Fixes: 7672deb9b60bb29d ("media: rcar-vin: use different v4l2 operations in media controller mode") Reported-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Fri, 11 May 2018 14:41:25 +0000 (10:41 -0400)]
media: Revert "media: rcar-vin: enable field toggle after a set number of lines for Gen3"
The offending commit was an attempt to fix the issue of writing outside
the capture buffer for VIN Gen3. Unfortunately it only fixed the symptom
of the problem to such a degree I could no longer reproduce it. Revert
the offending commit before a proper fix can be added in a follow-up
patch.
Trivial fix to spelling mistake in dprintk message text
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Anders Roxell [Tue, 8 May 2018 12:31:21 +0000 (08:31 -0400)]
media: usb: cx231xx-417: include linux/slab.h header
cx231-417 uses kmalloc/kfree functions, so slab header needs to be
included in order to fix the following build errors:
drivers/media/usb/cx231xx/cx231xx-417.c: In function ‘cx231xx_bulk_copy’:
CC drivers/media/platform/qcom/venus/firmware.o
drivers/media/usb/cx231xx/cx231xx-417.c:1389:11: error: implicit declaration of function ‘kmalloc’; did you mean ‘vmalloc’? [-Werror=implicit-function-declaration]
buffer = kmalloc(buffer_size, GFP_ATOMIC);
^~~~~~~
vmalloc
drivers/media/usb/cx231xx/cx231xx-417.c:1389:9: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
buffer = kmalloc(buffer_size, GFP_ATOMIC);
^
drivers/media/usb/cx231xx/cx231xx-417.c:1400:2: error: implicit declaration of function ‘kfree’; did you mean ‘vfree’? [-Werror=implicit-function-declaration]
kfree(buffer);
^~~~~
vfree
drivers/media/usb/cx231xx/cx231xx-417.c: In function ‘mpeg_open’:
drivers/media/usb/cx231xx/cx231xx-417.c:1713:7: error: implicit declaration of function ‘kzalloc’; did you mean ‘vzalloc’? [-Werror=implicit-function-declaration]
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
^~~~~~~
vzalloc
drivers/media/usb/cx231xx/cx231xx-417.c:1713:5: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
fh = kzalloc(sizeof(*fh), GFP_KERNEL);
^
Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
media: i2c: tda1997: Fix an error handling path 'tda1997x_probe()'
If 'media_entity_pads_init()' fails, we must free the resources allocated
by 'v4l2_ctrl_handler_init()', as already done in the previous error
handling path.
Trivial fix to spelling mistake in dev_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Brad Love [Tue, 8 May 2018 21:20:18 +0000 (17:20 -0400)]
media: cx23885: Ryzen DMA related RiSC engine stall fixes
This bug affects all of Hauppauge QuadHD boards when used on all Ryzen
platforms and some XEON platforms. On these platforms it is possible to
error out the RiSC engine and cause it to stall, whereafter the only
way to reset the board to a working state is to reboot.
Included is checks of the TC_REQ and TC_REQ_SET registers during states
of board initialization, reset, DMA start, and DMA stop. If both registers
are set, this indicates a stall in the RiSC engine, at which point the
bridge error is cleared.
A small delay is introduced in stop_dma as well, to allow transfers in
progress to finish.
After application all models work on Ryzen, occasionally yielding:
cx23885_clear_bridge_error: dma in progress detected 0x00000001 0x00000001, clearing
Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Hans Verkuil <hansverk@cisco.com>
[hansverk@cisco.com: fix compiler warning of unused 'reg' variable] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch loops up to five times on wakeup, marking any buffers
found done.
Since the count register is u16, but the vb2 counter is u32, some modulo
arithmetic is used to accommodate wraparound and ensure current active
buffer is the buffer expected.
Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
projects / kernel.git / log