Chris Wilson [Thu, 12 Jan 2017 16:45:59 +0000 (16:45 +0000)]
drm/i915: Fix up kerneldoc parameters for i915_gem_gtt_*()
Parameter: good.
Parameter - bad.
One day I'll learn the syntax.
Fixes: 625d988acc28 ("drm/i915: Extract reserving space in the GTT to a helper") Fixes: e007b19d7ba7 ("drm/i915: Use the MRU stack search after evicting") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170112164559.27232-1-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Chris Wilson [Thu, 12 Jan 2017 13:04:31 +0000 (13:04 +0000)]
drm/i915: Declare i915_gem_object_create_internal() as taking phys_addr_t size
The internal object is a collection of struct pages and so is
intrinsically linked to the available physical memory on the machine,
and not an arbitrary type from the uabi. Use phys_addr_t so the link
between size and memory consumption is clear, and then double check that
we don't overflow the maximum object size.
v2: Also assert that size is not zero - a mistake I made a few times
while writing selftests.
Chris Wilson [Thu, 12 Jan 2017 11:00:49 +0000 (11:00 +0000)]
drm/i915: Invalidate the guc ggtt TLB upon insertion
Move the GuC invalidation of its ggtt TLB to where we perform the ggtt
modification rather than proliferate it into all the callers of the
insert (which may or may not in fact have to do the insertion).
v2: Just do the guc invalidate unconditionally, (afaict) it has no impact
without the guc loaded on gen8+
v3: Conditionally invalidate the guc - just in case that register has
not been validated for other modes.
drm/i915: Remove useless casts to intel_plane_state
The visible member used to be in intel_plane_state->visible,
but has been moved to drm_plane_state->visible. In the conversion
some casts were left in that are now useless.
to_intel_plane_state(x)->base.visible is the same as x->visible,
so use the latter to clear up the code a little.
Michel Thierry [Thu, 12 Jan 2017 04:18:09 +0000 (20:18 -0800)]
drm/i915: Update i915_reset parameter for kerneldoc
Since commit c033666a94b57 ("drm/i915: Store a i915 backpointer from
engine, and use it") i915_reset receives dev_priv, but the kerneldoc
was not updated.
Michel Thierry [Thu, 12 Jan 2017 04:18:08 +0000 (20:18 -0800)]
drm/i915: Keep i915_handle_error kerneldoc parameters together
And before the function description.
Tidy up from commit 14bb2c11796d70b ("drm/i915: Fix a buch of kerneldoc
warnings"), all others kerneldoc blocks look ok.
The WaDisableLSQCROPERFforOCL workaround has the side effect of
disabling an L3SQ optimization that has huge performance implications
and is unlikely to be necessary for the correct functioning of usual
graphic workloads. Userspace is free to re-enable the workaround on
demand, and is generally in a better position to determine whether the
workaround is necessary than the DRM is (e.g. only during the
execution of compute kernels that rely on both L3 fences and HDC R/W
requests).
The same workaround seems to apply to BDW (at least to production
stepping G1) and SKL as well (the internal workaround database claims
that it does for all steppings, while the BSpec workaround table only
mentions pre-production steppings), but the DRM doesn't do anything
beyond whitelisting the L3SQCREG4 register so userspace can enable it
when it sees fit. Do the same on KBL platforms.
Improves performance of the GFXBench4 gl_manhattan31 benchmark by 60%,
and gl_4 (AKA car chase) by 14% on a KBL GT2 running Mesa master --
This is followed by a regression of 35% and 10% respectively for the
same benchmarks and platform caused by my recent patch series
switching userspace to use the dataport constant cache instead of the
sampler to implement uniform pull constant loads, which caused us to
hit more heavily the L3 cache (and on platforms other than KBL had the
opposite effect of improving performance of the same two benchmarks).
The overall effect on KBL of this change combined with the recent
userspace change is respectively 4.6% and 2.6%. SynMark2 OglShMapPcf
was affected by the constant cache changes (though it improved as it
did on other platforms rather than regressing), but is not
significantly affected by this patch (with statistical significance of
5% and sample size 20).
v2: Drop some more code to avoid unused variable warning.
Fixes: 738fa1b3123f ("drm/i915/kbl: Add WaDisableLSQCROPERFforOCL")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99256 Signed-off-by: Francisco Jerez <currojerez@riseup.net> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: beignet@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.7+ Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[Removed double Fixes tag] Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484217894-20505-1-git-send-email-mika.kuoppala@intel.com
Michał Winiarski [Wed, 11 Jan 2017 15:17:39 +0000 (16:17 +0100)]
drm/i915/guc: Make sure vma containing firmware is GuC mappable
Since commit 4741da925fa3 ("drm/i915/guc: Assert that all GGTT offsets used
by the GuC are mappable"), we're asserting that GuC firmware is in the
GuC mappable range.
Except we're not pinning the object with bias, which means it's possible
to trigger this assert. Let's add a proper bias.
Fixes: 4741da925fa3 ("drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappable") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170111151739.28965-1-michal.winiarski@intel.com
Libin Yang [Thu, 12 Jan 2017 08:04:53 +0000 (16:04 +0800)]
ALSA: hda - add DP MST audio support
This patch adds the DP MST audio support on i915 platform and
it will enable dyn_pcm_assign feature.
DP MST supports several device entry on the same port and each
device entry can map to one pcm stream. For example, on i915,
there are 3 pins, and each pin has 3 device entries. This means
there should be 3x3 pcms. However, there is only 3 pipe lines in
i915. This means 3 pcms are actived at most at the same moment.
We will create 5 pcms (pin number + dev entry num - 1) in this case.
For the details, please refer commit a76056f2e57e
("ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug")
Each device entry is a virtual pin. It is described by pin_nid and dev_id
in struct hdmi_spec_per_pin.
Zhenyu Wang [Mon, 9 Jan 2017 13:14:53 +0000 (21:14 +0800)]
drm/i915: check ppgtt validity when init reg state
Check if ppgtt is valid for context when init reg state. For gvt
context which has no i915 allocated ppgtt, failed to check that
would cause kernel null ptr reference error.
v2: remove !48bit ppgtt case as we'll always update before submit (Chris)
Chris Wilson [Wed, 11 Jan 2017 18:15:16 +0000 (18:15 +0000)]
drm/i915: Detect vma reserved for execbuf in evict-for-node
The vma->exec_list is still the only means we have for both reserving an
object in execbuf, and for constructing the eviction list. So during the
construction of the eviction list, we must treat anything already on the
exec_list as being pinned.
Yes, this sharing of two semantically different lists will be fixed! But
in the meantime, we have the issue that this is tripping up CI since we
started using i915_gem_gtt_reserve_node() + i915_gem_evict_for_node()
from the regular execbuf reservation path in commit 606fec956c0e
("drm/i915: Prefer random replacement before eviction search"):
Chris Wilson [Wed, 11 Jan 2017 14:08:58 +0000 (14:08 +0000)]
drm/i915: Add a sanity check that no request is submitted in the middle
It is an error to start a new request on the same timeline (ringbuffer)
as the current one before the current is submitted. If there are two
requests emitting to the ringbuffer at the same time, the operation is
undefined. We can catch this by checking for the timeline having a later
seqno than ours when we come to submit our request.
Currently we have this check at the end of __i915_add_request, but
having an early check as well isolates a failure in the caller versus a
failure in sealing the request (i.e. from inside __i915_add_request
itself). For example, CI is currently tripping over this late assertion
on ctg/ilk:
Chris Wilson [Wed, 11 Jan 2017 11:23:12 +0000 (11:23 +0000)]
drm/i915: Prefer random replacement before eviction search
Performing an eviction search can be very, very slow especially for a
range restricted replacement. For example, a workload like
gem_concurrent_blit will populate the entire GTT and then cause aperture
thrashing. Since the GTT is a mix of active and inactive tiny objects,
we have to search through almost 400k objects before finding anything
inside the mappable region, and as this search is required before every
operation performance falls off a cliff.
Instead of performing the full search, we do a trial replacement of the
node at a random location fitting the specified restrictions. We lose
the strict LRU property of the GTT in exchange for avoiding the slow
search (several orders of runtime improvement for gem_concurrent_blit
4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is
(later) mitigated firstly by only doing replacement if we find no
freespace and secondly by execbuf doing a PIN_NONBLOCK search first before
it starts thrashing (i.e. the random replacement will only occur from the
already inactive set of objects).
v2: Ascii-art, and check preconditionst
v3: Rephrase final sentence in comment to explain why we don't bother
with if (i915_is_ggtt(vm)) for preferring random replacement.
Chris Wilson [Wed, 11 Jan 2017 11:23:10 +0000 (11:23 +0000)]
drm/i915: Use the MRU stack search after evicting
When we evict from the GTT to make room for an object, the hole we
create is put onto the MRU stack inside the drm_mm range manager. On the
next search pass, we can speed up a PIN_HIGH allocation by referencing
that stack for the new hole.
v2: Pull together the 3 identical implements (ahem, a couple were
outdated) into a common routine for allocating a node and evicting as
necessary.
v3: Detect invalid calls to i915_gem_gtt_insert()
v4: kerneldoc
Function hsw_psr_setup handles vsc header setup for psr1 and
skl_psr_setup_vsc handles vsc header setup for psr2.
Setup VSC header in function skl_psr_setup_vsc for psr2 support,
as per edp 1.4 spec, table 6-11:VSC SDP HEADER Extension for psr2
operation.
v2: (Jani)
- Initialize variables to 0
- intel_dp_get_y_cord_status and intel_dp_get_y_cord_status made static
- Correct indentation for continuation lines
- Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED
- Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX_*
- Change VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED to DP_VSC_*
PSR2 vsc revision number hb2( as per table 6-11)is updated to
4 or 5 based on Y cordinate and Colorimetry Format as below
04h = 3D stereo + PSR/PSR2 + Y-coordinate.
05h = -3D stereo- + PSR/PSR2 + Y-coordinate + Pixel Encoding/Colorimetry
Format indication. A DP Source device is allowed to indicate the pixel
encoding/colorimetry format to the DP Sink device with VSC SDP only when
the DP Sink device supports it (
i.e.,VSC_SDP_EXTENSION_FOR_COLORIMETRY_SUPPORTED bit in the
DPRX_FEATURE_ENUMERATION_LIST register (DPCD Address 02210h, bit 3;
is set to 1).
v2: (Jani)
- Change DP_PSR_Y_COORDINATE to DP_PSR2_SU_Y_COORDINATE_REQUIRED.
- Add DP_PSR2_SU_GRANULARITY_REQUIRED.
- Change DPRX_FEATURE_ENUMERATION_LIST to DP_DPRX.
- Add GTC_CAP and AV_SYNC_CAP, other bits in DPRX_FEATURE_ENUMERATION_LIST.
v3: (Jani)
- Add support for bits 7:4 and 1 as per DP v1.4 for
DPRX_FEATURE_ENUMERATION_LIST.
Chris Wilson [Tue, 10 Jan 2017 14:47:34 +0000 (14:47 +0000)]
drm/i915: Replace 4096 with PAGE_SIZE or I915_GTT_PAGE_SIZE
Start converting over from the byte count to its semantic macro, either
we want to allocate the size of a physical page in main memory or we
want the size of a virtual page in the GTT. 4096 could mean either, but
PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve
code comprehension and future changes. In the future, we may want to use
variable GTT page sizes and so have the challenge of knowing which
hardcoded values were used to represent a physical page vs the virtual
page.
v2: Look for a few more 4096s to convert, discover IS_ALIGNED().
v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep
bdw stolen w/a as 4096 until we know better.
v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page
sizes.
Chris Wilson [Tue, 10 Jan 2017 17:22:46 +0000 (17:22 +0000)]
drm/i915: Rename i915_gem_engine_cleanup() to engine_set_wedged()
It has been some time since i915_gem_engine_cleanup was only called from
the module unload path, and now it is only called when the GPU is
wedged. Mika complained that the name is confusing, especially in light
of the existence of i915_gem_cleanup_engines().
Chris Wilson [Tue, 10 Jan 2017 17:22:45 +0000 (17:22 +0000)]
drm/i915: Mark all incomplete requests as -EIO when wedged
Similarly to a normal reset, after we mark the GPU as wedged (completely
fubar and no more requests can be executed), set the error status on all
the in flight requests.
Chris Wilson [Tue, 10 Jan 2017 17:22:44 +0000 (17:22 +0000)]
drm/i915: Set an error status for a resubmitted request
Let userspace know if its request was resubmitted due to it being
executed at the time of a global reset. In this case, the reset was for
a guilty request on another engine, and this request was an innocent
victim that will be re-executed upon restarting. However, since it was
running at the time of the reset, we can not guarantee that it suffered
no ill-effects from the reset (e.g. some context state may be lost, or
some self-modifying fragment shaders will be restarted from the final
state not their initial state), to let userspace know that it has been
corrupted set a special value on the fence->error, -EAGAIN.
If the request does hang on resubmission, the error will be overwritten
with -EIO.
Chris Wilson [Tue, 10 Jan 2017 17:22:43 +0000 (17:22 +0000)]
drm/i915: Set guilty-flag on fence after detecting a hang
The struct dma_fence carries a status field exposed to userspace by
sync_file. This is inspected after the fence is signaled and can convey
whether or not the request completed successfully, or in our case if we
detected a hang during the request (signaled via -EIO in
SYNC_IOC_FILE_INFO).
Chris Wilson [Tue, 10 Jan 2017 17:22:42 +0000 (17:22 +0000)]
drm/i915: Consolidate reset_request()
Always reset the requests of the guilty context, including the hung
request that we tell the hardware to skip. This should help if the
reprogram fails entirely, but more importantly makes the guilty path
more uniform (and simplifies the subsequent patch to tweak the cancelled
requests).
Tomeu Vizoso [Tue, 10 Jan 2017 13:43:05 +0000 (14:43 +0100)]
drm/i915: Put "cooked" vlank counters in frame CRC lines
Use drm_accurate_vblank_count so we have the full 32 bit to represent
the frame counter and userspace has a simpler way of knowing when the
counter wraps around.
Tomeu Vizoso [Tue, 10 Jan 2017 13:43:04 +0000 (14:43 +0100)]
drm/i915: Use new CRC debugfs API
The core provides now an ABI to userspace for generation of frame CRCs,
so implement the ->set_crc_source() callback and reuse as much code as
possible with the previous ABI implementation.
When handling the pageflip interrupt, we skip 1 or 2 frames depending on
the HW because they contain wrong values. For the legacy ABI for
generating frame CRCs, this was done in userspace but now that we have a
generic ABI it's better if it's not exposed by the kernel.
v2:
- Leave the legacy implementation in place as the ABI implementation
in the core is incompatible with it.
v3:
- Use the "cooked" vblank counter so we have a whole 32 bits.
- Make sure we don't mess with the state of the legacy CRC capture
ABI implementation.
v4:
- Keep use of get_vblank_counter as in the legacy code, will be
changed in a followup commit.
v5:
- Skip first frame or two as it's known that they contain wrong
data.
- A few fixes suggested by Emil Velikov.
v6:
- Rework programming of the HW registers to preserve previous
behavior.
v7:
- Address whitespace issue.
- Added a comment on why in the implementation of the new ABI we
skip the 1st or 2nd frames.
v9:
- Add stub for intel_crtc_set_crc_source.
v12:
- Rebased.
- Remove stub for intel_crtc_set_crc_source and instead set the
callback to NULL (Jani Nikula).
Daniel Vetter [Tue, 10 Jan 2017 16:03:46 +0000 (17:03 +0100)]
Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Pull in latest drm-next from Dave Airlie to get at all the drm-misc
goodies, specifically:
- dma_fence error state handling rework (Chris needs that for error
recovery)
- crc support locking changes (Tomeu's i915 crc patches need that).
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Tue, 10 Jan 2017 12:10:45 +0000 (12:10 +0000)]
drm/i915: Split out i915_gem_object_set_tiling()
Expose an interface for changing the tiling and stride on an object,
that includes the complexity of checking for conflicting bindings and
fence registers.
Chris Wilson [Tue, 10 Jan 2017 09:56:33 +0000 (09:56 +0000)]
drm/i915: Clip the partial view against the object not vma
The VMA is later clipped against the vm_area_struct before insertion of
the faulting PTE so we are free to create the partial view as we desire.
If we use the object as the extents rather than the area, this partial
can then be used for other areas.
Michel Thierry [Mon, 9 Jan 2017 14:51:35 +0000 (16:51 +0200)]
drm/i915/glk: Convert a few more IS_BROXTON() to IS_GEN9_LP()
Commit cc3f90f0633c ("drm/i915/glk: Reuse broxton code for geminilake")
missed a few of occurences of IS_BROXTON() that should have been
coverted to IS_GEN9_LP().
v2: Cite the right commit. (Ander)
Fixes: cc3f90f0633c ("drm/i915/glk: Reuse broxton code for geminilake") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Tomasz Lis <tomasz.lis@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> (v1) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483973495-15138-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Chris Wilson [Mon, 9 Jan 2017 16:16:13 +0000 (16:16 +0000)]
drm/i915: Move ggtt fence/alignment to i915_gem_tiling.c
Rename i915_gem_get_ggtt_size() and i915_gem_get_ggtt_alignment() to
i915_gem_fence_size() and i915_gem_fence_alignment() respectively to
better match usage. Similarly move the pair of functions into
i915_gem_tiling.c next to the fence restrictions.
Chris Wilson [Mon, 9 Jan 2017 16:16:12 +0000 (16:16 +0000)]
drm/i915: Remove the rounding down of the gen4+ fence region
Restricting the fence to the end of the previous tile-row breaks access
to the final portion of the object. On gen2/3 we employed lazy fencing
to pad out the fence with scratch page to provide access to the tail,
and now we also pad out the object on gen4+ we can apply the same fix.
Chris Wilson [Mon, 9 Jan 2017 16:16:11 +0000 (16:16 +0000)]
drm/i915: Store required fence size/alignment for GGTT vma
The fence size/alignment is a combination of the vma size plus object
tiling parameters. Those parameters are rarely changed, making the fence
size/alignemnt roughly constant for the lifetime of the VMA. We can
simplify subsequent calculations by precalculating the size/alignment
required for GGTT vma taking fencing into account (with an update if we
do change the tiling or stride).
Chris Wilson [Mon, 9 Jan 2017 16:16:10 +0000 (16:16 +0000)]
drm/i915: Replace WARNs in fence register writes with extensive asserts
All of these conditions are prechecked by i915_tiling_ok() before we
allow setting the tiling/stride on the object and so we should never
fail asserting those conditions before writing the register.
Chris Wilson [Mon, 9 Jan 2017 16:16:09 +0000 (16:16 +0000)]
drm/i915: Align GGTT sizes to a fence tile row
Ensure the view occupies the full tile row so that reads/writes into the
VMA do not escape (via fenced detiling) into neighbouring objects - we
will pad the object with scratch pages to satisfy the fence. This
applies the lazy-tiling we employed on gen2/3 to gen4+.
Dave Airlie [Mon, 9 Jan 2017 22:06:56 +0000 (08:06 +1000)]
Merge tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc into drm-next
Back to regular -misc pulls with reasonable sizes:
- dma_fence error clarification (Chris)
- drm_crtc_from_index helper (Shawn), pile more patches on the m-l to roll
this out to drivers
- mmu-less support for fbdev helpers from Benjamin
- piles of kerneldoc work
- some polish for crc support from Tomeu and Benjamin
- odd misc stuff all over
* tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
dma-fence: Introduce drm_fence_set_error() helper
dma-fence: Wrap querying the fence->status
dma-fence: Clear fence->status during dma_fence_init()
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"
drm: Change the return type of the unload hook to void
drm: add more document for drm_crtc_from_index()
drm: remove useless parameters from drm_pick_cmdline_mode function
drm: crc: Call wake_up_interruptible() each time there is a new CRC entry
drm: allow to use mmuless SoC
drm: compile drm_vm.c only when needed
fbmem: add a default get_fb_unmapped_area function
drm: crc: Wait for a frame before returning from open()
drm: Move locking into drm_debugfs_crtc_crc_add
drm/imx: imx-tve: Remove unused variable
Revert "drm: nouveau: fix build when LEDS_CLASS=m"
drm: Add kernel-doc for drm_crtc_commit_get/put
drm/atomic: Fix outdated comment.
drm: reference count event->completion
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
drm: Document deprecated load/unload hook
...
Dave Airlie [Mon, 9 Jan 2017 22:02:09 +0000 (08:02 +1000)]
Merge tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel into drm-next
More 4.11 stuff, holidays edition (i.e. not much):
- docs and cleanups for shared dpll code (Ander)
- some kerneldoc work (Chris)
- fbc by default on gen9+ too, yeah! (Paulo)
- fixes, polish and other small things all over gem code (Chris)
- and a few small things on top
Plus a backmerge, because Dave was enjoying time off too.
* tag 'drm-intel-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-intel: (275 commits)
drm/i915: Update DRIVER_DATE to 20170109
drm/i915: Drain freed objects for mmap space exhaustion
drm/i915: Purge loose pages if we run out of DMA remap space
drm/i915: Fix phys pwrite for struct_mutex-less operation
drm/i915: Simplify testing for am-I-the-kernel-context?
drm/i915: Use range_overflows()
drm/i915: Use fixed-sized types for stolen
drm/i915: Use phys_addr_t for the address of stolen memory
drm/i915: Consolidate checks for memcpy-from-wc support
drm/i915: Only skip requests once a context is banned
drm/i915: Move a few more utility macros to i915_utils.h
drm/i915: Clear ret before unbinding in i915_gem_evict_something()
drm/i915/guc: Exclude the upper end of the Global GTT for the GuC
drm/i915: Move a few utility macros into a separate header
drm/i915/execlists: Reorder execlists register enabling
drm/i915: Assert that we do create the deferred context
drm/i915: Assert all timeline requests are gone before fini
drm/i915: Revoke fenced GTT mmapings across GPU reset
drm/i915: enable FBC on gen9+ too
drm/i915: actually drive the BDW reserved IDs
...
Chris Wilson [Wed, 4 Jan 2017 14:12:22 +0000 (14:12 +0000)]
dma-fence: Introduce drm_fence_set_error() helper
The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.
This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.
Matthew Auld [Tue, 13 Dec 2016 16:05:12 +0000 (16:05 +0000)]
drm/i915: don't open code the pdpe/pml4e clearing
Now that it's obvious what the helpers do, we can simplify the code
somewhat by using them when clearing the pdpe/pml4e with the relevant
scratch entry.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213160512.7008-1-matthew.auld@intel.com
The function name gen8_setup_page_directory_pointer is misleading, and
only serves to confuse the reader, it's not setting up a pdp, but
rather encoding a specific pml4e with a given pdp.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The function name gen8_setup_page_directory is misleading, and only
serves to confuse the reader, it's not setting up a pd, but rather
encoding a specific pdpe with a given pd.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 4 Jan 2017 14:12:21 +0000 (14:12 +0000)]
dma-fence: Wrap querying the fence->status
The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().
Chris Wilson [Wed, 4 Jan 2017 14:12:20 +0000 (14:12 +0000)]
dma-fence: Clear fence->status during dma_fence_init()
As the fence->status is an optional field that may be set before
dma_fence_signal() is called to convey that the fence completed with an
error, we have to ensure that it is always set to zero on initialisation
so that the typical use (i.e. unset) always flags a successful completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk
Shawn Guo [Sat, 7 Jan 2017 08:52:11 +0000 (16:52 +0800)]
drm: add more document for drm_crtc_from_index()
Add a bit more document for function drm_crtc_from_index() to cross
link it with drm_crtc_from_index(), and explain that the function is
useful in vblank code.
While at it, add cross link comment for drm_plane_from_index() as well.
Dave Airlie [Sun, 8 Jan 2017 23:55:57 +0000 (09:55 +1000)]
Merge tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc into drm-next
First -misc pull for 4.11:
- drm_mm rework + lots of selftests (Chris Wilson)
- new connector_list locking+iterators
- plenty of kerneldoc updates
- format handling rework from Ville
- atomic helper changes from Maarten for better plane corner-case handling
in drivers, plus the i915 legacy cursor patch that needs this
- bridge cleanup from Laurent
- plus plenty of small stuff all over
- also contains a merge of the 4.10 docs tree so that we could apply the
dma-buf kerneldoc patches
It's a lot more than usual, but due to the merge window blackout it also
covers about 4 weeks, so all in line again on a per-week basis. The more
annoying part with no pull request for 4 weeks is managing cross-tree
work. The -intel pull request I'll follow up with does conflict quite a
bit with -misc here. Longer-term (if drm-misc keeps growing) a
drm-next-queued to accept pull request for the next merge window during
this time might be useful.
I'd also like to backmerge -rc2+this into drm-intel next week, we have
quite a pile of patches waiting for the stuff in here.
* tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits)
drm: Add kerneldoc markup for new @scan parameters in drm_mm
drm/mm: Document locking rules
drm: Use drm_mm_insert_node_in_range_generic() for everyone
drm: Apply range restriction after color adjustment when allocation
drm: Wrap drm_mm_node.hole_follows
drm: Apply tight eviction scanning to color_adjust
drm: Simplify drm_mm scan-list manipulation
drm: Optimise power-of-two alignments in drm_mm_scan_add_block()
drm: Compute tight evictions for drm_mm_scan
drm: Fix application of color vs range restriction when scanning drm_mm
drm: Unconditionally do the range check in drm_mm_scan_add_block()
drm: Rename prev_node to hole in drm_mm_scan_add_block()
drm: Fix O= out-of-tree builds for selftests
drm: Extract struct drm_mm_scan from struct drm_mm
drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan()
drm: Simplify drm_mm_clean()
drm: Detect overflow in drm_mm_reserve_node()
drm: Fix kerneldoc for drm_mm_scan_remove_block()
drm: Promote drm_mm alignment to u64
drm: kselftest for drm_mm and restricted color eviction
...
Linus Torvalds [Sun, 8 Jan 2017 19:42:04 +0000 (11:42 -0800)]
Merge tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
artifact of the holiday break I think.
Lots of gadget and the usual XHCI fixups for reported issues (one day
that driver will calm down...) Also included are a bunch of usb-serial
driver fixes, and for good measure, a number of much-reported MUSB
driver issues have finally been resolved.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
USB: fix problems with duplicate endpoint addresses
usb: ohci-at91: use descriptor-based gpio APIs correctly
usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
usb: hub: Move hub_port_disable() to fix warning if PM is disabled
usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
usb: musb: fix compilation warning on unused function
usb: musb: Fix trying to free already-free IRQ 4
usb: musb: dsps: implement clear_ep_rxintr() callback
usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
USB: serial: ti_usb_3410_5052: fix NULL-deref at open
USB: serial: spcp8x5: fix NULL-deref at open
USB: serial: quatech2: fix sleep-while-atomic in close
USB: serial: pl2303: fix NULL-deref at open
USB: serial: oti6858: fix NULL-deref at open
USB: serial: omninet: fix NULL-derefs at open and disconnect
USB: serial: mos7840: fix misleading interrupt-URB comment
USB: serial: mos7840: remove unused write URB
USB: serial: mos7840: fix NULL-deref at open
USB: serial: mos7720: remove obsolete port initialisation
USB: serial: mos7720: fix parallel probe
...
Linus Torvalds [Sun, 8 Jan 2017 19:37:44 +0000 (11:37 -0800)]
Merge tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few small char/misc driver fixes for 4.10-rc3.
Two MEI driver fixes, and three NVMEM patches for reported issues, and
a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
been in linux-next with no reported issues"
* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
hyper-v: Add myself as additional MAINTAINER
nvmem: fix nvmem_cell_read() return type doc
nvmem: imx-ocotp: Fix wrong register size
nvmem: qfprom: Allow single byte accesses for read/write
mei: move write cb to completion on credentials failures
mei: bus: fix mei_cldev_enable KDoc
Linus Torvalds [Sun, 8 Jan 2017 19:22:00 +0000 (11:22 -0800)]
Merge tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are some staging and IIO driver fixes for 4.10-rc3.
Most of these are minor IIO fixes of reported issues, along with one
network driver fix to resolve an issue. And a MAINTAINERS update with
a new mailing list. All of these, except the MAINTAINERS file update,
have been in linux-next with no reported issues (the MAINTAINERS patch
happened on Friday...)"
* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: add greybus subsystem mailing list
staging: octeon: Call SET_NETDEV_DEV()
iio: accel: st_accel: fix LIS3LV02 reading and scaling
iio: common: st_sensors: fix channel data parsing
iio: max44000: correct value in illuminance_integration_time_available
iio: adc: TI_AM335X_ADC should depend on HAS_DMA
iio: bmi160: Fix time needed to sleep after command execution
iio: 104-quad-8: Fix active level mismatch for the preset enable option
iio: 104-quad-8: Fix off-by-one errors when addressing IOR
iio: 104-quad-8: Fix index control configuration
Johannes Weiner [Sat, 7 Jan 2017 00:21:43 +0000 (19:21 -0500)]
mm: workingset: fix use-after-free in shadow node shrinker
Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.
Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:
This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().
The problem is with 14b468791fa9 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.
While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk. If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.
Consider this tree, where the s are shadow entries:
root->rnode
|
[0 n]
| |
[s ] [sssss]
Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:
root->rnode
|
[0 ]
|
[s ]
Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:
root->rnode
|
[s ]
The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.
root->rnode
|
s
Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.
Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.
Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.
Fixes: 14b468791fa9 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking") Reported-by: Dave Chinner <david@fromorbit.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reported-and-tested-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Leech <cleech@redhat.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Sat, 7 Jan 2017 23:37:31 +0000 (15:37 -0800)]
mm: stop leaking PageTables
4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.
Commit 953c66c2b22a ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().
This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().
Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).
And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.
Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64") Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 7 Jan 2017 17:47:43 +0000 (09:47 -0800)]
Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
"The asm-prototypes.h file added in the last merge window results in
invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
segfaults.
This pull request fixes the header, the genksyms fix is in my kbuild
branch for 4.11"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
asm-prototypes: Clear any CPP defines before declaring the functions
Linus Torvalds [Fri, 6 Jan 2017 23:38:39 +0000 (15:38 -0800)]
Merge tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing particular stands out, only a few small fixes for USB-audio,
HD-audio and Firewire. The USB-audio fix is the respin of the previous
race fix after a revert due to the regression"
* tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
Revert "ALSA: firewire-lib: change structure member with proper type"
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
ALSA: usb-audio: Fix irq/process data synchronization
ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
ALSA: hda - Fix up GPIO for ASUS ROG Ranger
ALSA: firewire-lib: change structure member with proper type
ALSA: firewire-tascam: Fix to handle error from initialization of stream data
ALSA: fireworks: fix asymmetric API call at unit removal
Linus Torvalds [Fri, 6 Jan 2017 23:35:27 +0000 (15:35 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders
that don't turn all the clks on and another fix for stm32f4 SoCs where
we have multiple drivers attaching to the same DT node"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method
clk: renesas: mstp: Support 8-bit registers for r7s72100
Linus Torvalds [Fri, 6 Jan 2017 19:19:03 +0000 (11:19 -0800)]
Merge tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Add mtty sample driver properly into build system (Alex Williamson)
- Restore type1 mapping performance after mdev (Alex Williamson)
- Fix mdev device race (Alex Williamson)
- Cleanups to the mdev ABI used by vendor drivers (Alex Williamson)
- Build fix for old compilers (Arnd Bergmann)
- Fix sample driver error path (Dan Carpenter)
- Handle pci_iomap() error (Arvind Yadav)
- Fix mdev ioctl return type (Paul Gortmaker)
* tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfio:
vfio-mdev: fix non-standard ioctl return val causing i386 build fail
vfio-pci: Handle error from pci_iomap
vfio-mdev: fix some error codes in the sample code
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
vfio-mdev: Make mdev_device private and abstract interfaces
vfio-mdev: Make mdev_parent private
vfio-mdev: de-polute the namespace, rename parent_device & parent_ops
vfio-mdev: Fix remove race
vfio/type1: Restore mapping performance with mdev support
vfio-mdev: Fix mtty sample driver building
Linus Torvalds [Fri, 6 Jan 2017 18:53:21 +0000 (10:53 -0800)]
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fixes from Konrad Rzeszutek Wilk:
"This has one fix to make i915 work when using Xen SWIOTLB, and a
feature from Geert to aid in debugging of devices that can't do DMA
outside the 32-bit address space.
The feature from Geert is on top of v4.10 merge window commit
(specifically you pulling my previous branch), as his changes were
dependent on the Documentation/ movement patches.
I figured it would just easier than me trying than to cherry-pick the
Documentation patches to satisfy git.
The patches have been soaking since 12/20, albeit I updated the last
patch due to linux-next catching an compiler error and adding an
Tested-and-Reported-by tag"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Export swiotlb_max_segment to users
swiotlb: Add swiotlb=noforce debug option
swiotlb: Convert swiotlb_force from int to enum
x86, swiotlb: Simplify pci_swiotlb_detect_override()
Linus Torvalds [Fri, 6 Jan 2017 18:49:36 +0000 (10:49 -0800)]
Merge tag 'iommu-fixes-v4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"Three fixes queued up:
- fix an issue with command buffer overflow handling in the AMD IOMMU
driver
- add an additional context entry flush to the Intel VT-d driver to
make sure any old context entry from kdump copying is flushed out
of the cache
- correct the encoding of the PASID table size in the Intel VT-d
driver"
* tag 'iommu-fixes-v4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix the left value check of cmd buffer
iommu/vt-d: Fix pasid table size encoding
iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped
Linus Torvalds [Fri, 6 Jan 2017 18:40:17 +0000 (10:40 -0800)]
Merge tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a device enumeration problem related to _ADR matching and an
IOMMU initialization issue related to the DMAR table missing, remove
an excessive function call from the core ACPI code, update an error
message in the ACPI WDAT watchdog driver and add a way to work around
problems with unhandled GPE notifications.
Specifics:
- Fix a device enumeration issue leading to incorrect associations
between ACPI device objects and platform device objects
representing physical devices if the given device object has both
_ADR and _HID (Rafael Wysocki).
- Avoid passing NULL to acpi_put_table() during IOMMU initialization
which triggers a (rightful) warning from ACPICA (Rafael Wysocki).
- Drop an excessive call to acpi_dma_deconfigure() from the core code
that binds ACPI device objects to device objects representing
physical devices (Lorenzo Pieralisi).
- Update an error message in the ACPI WDAT watchdog driver to make it
provide more useful information (Mika Westerberg).
- Add a mechanism to work around issues with unhandled GPE
notifications that occur during system initialization and cannot be
prevented by means of sysfs (Lv Zheng)"
* tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / DMAR: Avoid passing NULL to acpi_put_table()
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
ACPI / watchdog: Print out error number when device creation fails
ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding
ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one()
Linus Torvalds [Fri, 6 Jan 2017 18:37:50 +0000 (10:37 -0800)]
Merge tag 'pm-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a few issues in the intel_pstate driver, a documetation
issue, a false-positive compiler warning in the generic power domains
framework and two problems in the devfreq subsystem. They also update
the MAINTAINERS entry for devfreq and add a new "compatible" string to
the generic cpufreq-dt driver.
Specifics:
- Fix a few intel_pstate driver issues: add missing locking it two
places, avoid exposing a useless debugfs interface and keep the
attribute values in sysfs in sync (Rafael Wysocki).
- Drop confusing kernel-doc references related to power management
and ACPI from the driver API manual (Rafael Wysocki).
- Make a false-positive compiler warning in the generic power domains
framework go away (Augusto Mecking Caringi).
- Fix two initialization issues in the devfreq subsystem and update
the MAINTAINERS entry for it (Chanwoo Choi).
- Add a new "compatible" string for APM X-Gene 2 to the generic DT
cpufreq driver (Hoan Tran)"
* tag 'pm-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: dt: Add support for APM X-Gene 2
PM / devfreq: exynos-bus: Fix the wrong return value
PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support
PM / docs: Drop confusing kernel-doc references from infrastructure.rst
PM / domains: Fix 'may be used uninitialized' build warning
cpufreq: intel_pstate: Always keep all limits settings in sync
cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Use locking in intel_pstate_resume()
cpufreq: intel_pstate: Do not expose PID parameters in passive mode
So they can figure out what is the optimal number of pages
that can be contingously stitched together without fear of
bounce buffer.
We also expose an mechanism for sub-users of SWIOTLB API, such
as Xen-SWIOTLB to set the max segment value. And lastly
if swiotlb=force is set (which mandates we bounce buffer everything)
we set max_segment so at least we can bounce buffer one 4K page
instead of a giant 512KB one for which we may not have space.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-and-Tested-by: Juergen Gross <jgross@suse.com>
Chris Wilson [Fri, 6 Jan 2017 15:22:40 +0000 (15:22 +0000)]
drm/i915: Drain freed objects for mmap space exhaustion
As we now use a deferred free queue for objects, simply retiring the
active objects is not enough to immediately free them and recover their
mmap space - we must now also drain the freed object list.
Fixes: fbbd37b36fa5 ("drm/i915: Move object release to a freelist + worker" Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170106152240.5793-3-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Fri, 6 Jan 2017 15:22:39 +0000 (15:22 +0000)]
drm/i915: Purge loose pages if we run out of DMA remap space
If the DMA remap fails, one cause can be that we have too many objects
pinned in a small remapping table, such as swiotlb. (DMA remapping does
not trigger the shrinker by itself on its normal failure paths.) So try
purging all other objects (using i915_gem_shrink_all(), sparing our own
pages as we have yet to assign them to the obj->pages) and try again. If
there are no pages to reclaim (and consequently no pages to unmap), the
shrinker will report 0 and we fail with -ENOSPC as before.
Chris Wilson [Fri, 6 Jan 2017 15:22:38 +0000 (15:22 +0000)]
drm/i915: Fix phys pwrite for struct_mutex-less operation
Since commit fe115628d567 ("drm/i915: Implement pwrite without
struct-mutex") the lowlevel pwrite calls are now called without the
protection of struct_mutex, but pwrite_phys was still asserting that it
held the struct_mutex and later tried to drop and relock it.
Fixes: fe115628d567 ("drm/i915: Implement pwrite without struct-mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170106152240.5793-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Fri, 6 Jan 2017 15:20:13 +0000 (15:20 +0000)]
drm/i915: Simplify testing for am-I-the-kernel-context?
The kernel context (dev_priv->kernel_context) is unique in that it is
not associated with any user filp - it is the only one with
ctx->file_priv == NULL. This is a simpler test than comparing it against
dev_priv->kernel_context which involves some pointer dancing.
In checking that this is true, we notice that the gvt context is
allocating itself a i915_hw_ppgtt it doesn't use and not flagging that
its file_priv should be invalid.
Chris Wilson [Fri, 6 Jan 2017 15:20:11 +0000 (15:20 +0000)]
drm/i915: Use fixed-sized types for stolen
Stolen memory is a hardware resource of known size, so use an accurate
fixed integer type rather than the ambiguous variable size_t. This was
motivated by the next patch spotting inconsistencies in our types.
Chris Wilson [Fri, 6 Jan 2017 15:20:10 +0000 (15:20 +0000)]
drm/i915: Use phys_addr_t for the address of stolen memory
Though we know the hw is limited to keeping stolen memory inside the
first 4GiB, it is clearer to the reader that we are handling physical
address if we use phys_addr_t to refer to the base of stolen memory.
Merge branches 'pm-domains', 'pm-docs' and 'pm-devfreq'
* pm-domains:
PM / domains: Fix 'may be used uninitialized' build warning
* pm-docs:
PM / docs: Drop confusing kernel-doc references from infrastructure.rst
* pm-devfreq:
PM / devfreq: exynos-bus: Fix the wrong return value
PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support
* pm-cpufreq:
cpufreq: dt: Add support for APM X-Gene 2
cpufreq: intel_pstate: Always keep all limits settings in sync
cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy()
cpufreq: intel_pstate: Use locking in intel_pstate_resume()
cpufreq: intel_pstate: Do not expose PID parameters in passive mode
Some SoC without MMU have display driver where a drm/kms driver
could be implemented.
Before doing such kind of thing drm/kms must allow to use mmuless devices.
This patch propose to remove MMU configuration flag and add a cma helper
function to help implementing mmuless display driver
version 4:
- add documentation about drm_gem_cma_get_unmapped_area()
- stub it MMU case
fbmem: add a default get_fb_unmapped_area function
Allow generic frame-buffer to provide a default
get_fb_unmapped_area function if specific devices need it.
Usually this function is defined in architecture directories but
define it here may limit code duplication especially for all ARM
platforms without MMU.
version 5:
- set get_unmapped_area field if FB_PROVIDE_GET_FB_UNMAPPED_AREA is
defined
version 4:
- introdude a configuration flag to be independent of architecture
Linus Torvalds [Fri, 6 Jan 2017 07:17:41 +0000 (23:17 -0800)]
Merge tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Just two small fixes for platform drivers x86:
- use brightness_set_blocking for LED-setting callbacks on Fujitsu
laptops
- fix surface3_button build errors"
* tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: fujitsu-laptop: use brightness_set_blocking for LED-setting callbacks
platform/x86: fix surface3_button build errors
Linus Torvalds [Fri, 6 Jan 2017 07:06:06 +0000 (23:06 -0800)]
Merge branch 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
"Two small fixes relating to audit's use of fsnotify.
The first patch plugs a leak and the second fixes some lock
shenanigans. The patches are small and I banged on this for an
afternoon with our testsuite and didn't see anything odd"
* 'stable-4.10' of git://git.infradead.org/users/pcmoore/audit:
audit: Fix sleep in atomic
fsnotify: Remove fsnotify_duplicate_mark()
Linus Torvalds [Thu, 5 Jan 2017 23:06:02 +0000 (15:06 -0800)]
Merge tag 'drm-intel-fixes-2017-01-05' of git://anongit.freedesktop.org/git/drm-intel
Pull i915 drm fixes from Jani Nikula:
"Here's a bunch of drm/i915 fixes for v4.10-rc3. It includes GVT-g
fixes.
My new year's resolution is to start using signed tags for pulls. If
that feels like a déjà vu, it's ((new year's) resolution), not (new
(year's resolution))"
[ Taking this directly from Jani because Dave Airlie is only partially
connected right now. - Linus ]
* tag 'drm-intel-fixes-2017-01-05' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Prevent timeline updates whilst performing reset
drm/i915: Silence allocation failure during sg_trim()
drm/i915: Don't clflush before release phys object
drm/i915: Fix oops in overlay due to frontbuffer tracking
drm/i915: Fix oopses in the overlay code due to i915_gem_active stuff
drm/i915: Initialize overlay->last_flip properly
drm/i915: Move the min_pixclk[] handling to the end of readout
drm/i915: Force VDD off on the new power seqeuencer before starting to use it
drm/i915/gvt: fix typo in cfg_space range check
drm/i915/gvt: fix an issue in emulating cfg space PCI_COMMAND
drm/i915/gvt/kvmgt: trival: code cleanup
drm/i915/gvt/kvmgt: prevent double-release of vgpu
drm/i915/gvt/kvmgt: check returned slot for gfn
drm/i915/gvt/kvmgt: dereference the pointer within lock
drm/i915/gvt: reset the GGTT entry when vGPU created
drm/i915/gvt: fix an error in opregion handling
Chris Wilson [Thu, 5 Jan 2017 17:00:59 +0000 (17:00 +0000)]
drm/i915: Only skip requests once a context is banned
If we skip before banning, we have an inconsistent interface between
execbuf still queueing valid request but those requests already queued
being cancelled. If we only cancel the pending requests once we stop
accepting new requests, the user interface is more consistent.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: <stable@vger.kernel.org> # v4.9+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170105170059.344-1-chris@chris-wilson.co.uk
Alan Stern [Mon, 19 Dec 2016 17:03:41 +0000 (12:03 -0500)]
USB: fix problems with duplicate endpoint addresses
When checking a new device's descriptors, the USB core does not check
for duplicate endpoint addresses. This can cause a problem when the
sysfs files for those endpoints are created; trying to create multiple
files with the same name will provoke a WARNING:
WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0
sysfs: cannot create duplicate filename
'/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05'
Kernel panic - not syncing: panic_on_warn set ...
Linus Torvalds [Thu, 5 Jan 2017 18:36:56 +0000 (10:36 -0800)]
Merge tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Three small pin control fixes for the v4.10 series. Very little to say
about them, just driver fixes.
- one fix to the AMD pinctrl ACPI glue
- fix requests on the Meson driver
- fix bitfield widths on Samsungs Exynos 5433"
* tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433
pinctrl: meson: fix gpio request disabling other modes
pinctrl/amd: Set the level based on ACPI tables
Peter Rosin [Thu, 22 Dec 2016 07:43:55 +0000 (08:43 +0100)]
usb: ohci-at91: use descriptor-based gpio APIs correctly
The gpiod_get* function family does not want the -gpio suffix.
Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional.
The descriptor based APIs handle active high/low automatically.
The vbus-gpios are output, request enable while getting the gpio.
Don't try to get any vbus-gpios for ports outside num-ports.
WTF? Big sigh.
Fixes: 054d4b7b577d ("usb: ohci-at91: Use descriptor-based gpio APIs") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Thu, 5 Jan 2017 18:32:16 +0000 (10:32 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a rather large set of bugfixes, as we just returned from the
Christmas break. Most of these are relatively unimportant fixes for
regressions introduced during the merge window, and about half of the
changes are for mach-omap2.
A couple of patches are just cleanups and dead code removal that I
would not normally have considered for merging after -rc2, but I
decided to take them along with the fixes this time.
Notable fixes include:
- removing the skeleton.dtsi include broke a number of machines, and
we have to put empty /chosen nodes back to be able to pass kernel
command lines as before
- enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as
it had been for no good reason for a long time"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
drivers: psci: annotate timer on stack to silence odebug messages
ARM64: defconfig: enable DRM_MESON as module
ARM64: dts: meson-gx: Add Graphic Controller nodes
ARM64: dts: meson-gxl: fix GPIO include
ARM: dts: imx6: Disable "weim" node in the dtsi files
ARM: dts: qcom: apq8064: Add missing scm clock
ARM: davinci: da8xx: Fix sleeping function called from invalid context
ARM: davinci: Make __clk_{enable,disable} functions public
ARM: davinci: da850: don't add emac clock to lookup table twice
ARM: davinci: da850: fix infinite loop in clk_set_rate()
ARM: i.MX: remove map_io callback
ARM: dts: vf610-zii-dev-rev-b: Add missing newline
ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
ARM: dts: imx31: fix AVIC base address
ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
arm64: dts: vexpress: Support GICC_DIR operations
ARM: dts: vexpress: Support GICC_DIR operations
firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
arm64: dts: msm8996: Add required memory carveouts
...
projects / kernel.git / log