Merge tag 'asoc-fix-v5.19-rc4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Drop Rockchip BCLK management for v5.19
As covered in the second revert commit in this pull request the version
of the BCLK muxing that's in v5.19 is causing issues, let's just revert
it and wait for the more complete support in v5.20 instead.
Mark Brown [Wed, 13 Jul 2022 13:04:51 +0000 (14:04 +0100)]
ASoC: rockchip-i2s: Undo BCLK pinctrl changes
The version of the BCLK pinctrl management changes that made it into
v5.19 has caused problems on some systems due to overly strict DT
requirements but attempts to fix it have caused further breakage on
other platforms. Just drop the changes for this release, we already
have a better version queued for -next.
Fixes: cd489a4912f1 ("ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found") Fixes: 26dcc16b6d47 ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220713130451.31481-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.
Jeremy Szu [Wed, 13 Jul 2022 02:27:04 +0000 (10:27 +0800)]
ALSA: hda/realtek: fix mute/micmute LEDs for HP machines
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple
motherboard design and they are using different subsystem ID of audio
codec. Add the same quirk for other MBs.
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
On a HP 288 Pro G6, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4
that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding
entry to the quirk table.
ALSA: hda/realtek: Fix headset mic for Acer SF313-51
The issue on Acer SWIFT SF313-51 is that headset microphone
doesn't work. The following quirk fixed headset microphone issue.
Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC)
was not successful on my SF313-51.
Alexandru Elisei [Mon, 11 Jul 2022 13:05:22 +0000 (14:05 +0100)]
ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found
Commit 26dcc16b6d47 ("ASoC: rockchip: i2s: switch BCLK to GPIO") switched
BCLK to GPIO functions when probing the i2s bus interface, but missed
adding a check for when devm_pinctrl_get() returns an error. This can lead
to the following NULL pointer dereference on a rockpro64-v2 if there are no
"pinctrl" properties in the i2s device tree node.
Check that i2s->pinctrl is valid before attempting to search for the
bclk_on and bclk_off pinctrl states.
Peter Ujfalusi [Thu, 30 Jun 2022 06:56:38 +0000 (09:56 +0300)]
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.
Fixes: 79f91cd9defc6 ("ASoC: Intel: Skylake: Parse nhlt and register clock device") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 30 Jun 2022 06:56:37 +0000 (09:56 +0300)]
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.
Fixes: 79f91cd9defc6 ("ASoC: Intel: Skylake: Parse nhlt and register clock device") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Starting from ADL platform we have four HDMI PCM devices which exceeds
the size of sof_hdmi array. Since each sof_hdmi_pcm structure
represents one HDMI PCM device, we remove the sof_hdmi array and add a
new member hdmi_jack to the sof_hdmi_pcm structure to fix the
out-of-bounds problem.
Jianglei Nie [Wed, 29 Jun 2022 18:25:20 +0000 (02:25 +0800)]
ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()
q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph
with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph
is not released, which will lead to a memory leak.
We can release the graph->graph with kfree() when idr_alloc() fails to
fix the memory leak.
Hector Martin [Thu, 30 Jun 2022 07:51:35 +0000 (09:51 +0200)]
ASoC: tas2764: Fix amp gain register offset & default
The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.
Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: ff5fd908f544 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
Hector Martin [Thu, 30 Jun 2022 07:51:34 +0000 (09:51 +0200)]
ASoC: tas2764: Correct playback volume range
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.
Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: ff5fd908f544 ("ASoC: tas2764: Add the driver for the TAS2764") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org>
Martin Povišer [Thu, 30 Jun 2022 07:51:33 +0000 (09:51 +0200)]
ASoC: tas2764: Fix and extend FSYNC polarity handling
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!
Martin Povišer [Thu, 30 Jun 2022 07:51:32 +0000 (09:51 +0200)]
ASoC: tas2764: Add post reset delays
Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit 0dea35f7773b ("ASoC: tas2770: Insert post reset delay").
Charles Keepax [Tue, 28 Jun 2022 15:34:09 +0000 (16:34 +0100)]
ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE,
however this register is not used on wm8998. This was not noticed as
previously snd_soc_component_read did not print an error message.
However, now the log gets filled with error messages, further more the
test for if the LRCLK changed will return spurious results.
Update the code to use the RX_BCLK_RATE register, the LRCLK parameters
are written to both registers and the RX_BCLK_RATE register is used
across all Arizona devices.
Charles Keepax [Tue, 28 Jun 2022 15:34:08 +0000 (16:34 +0100)]
ASoC: cs47l92: Fix event generation for OUT1 demux
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Charles Keepax [Tue, 28 Jun 2022 15:34:07 +0000 (16:34 +0100)]
ASoC: wm8998: Fix event generation for input mux
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Charles Keepax [Tue, 28 Jun 2022 15:34:06 +0000 (16:34 +0100)]
ASoC: wm5102: Fix event generation for output compensation
The output compensation controls always returns zero regardless of if
the control value was updated. This results in missing notifications
to user-space of the control change. Update the handling to return 1
when the value is changed.
Yassine Oudjana [Wed, 22 Jun 2022 06:17:45 +0000 (10:17 +0400)]
ASoC: wcd9335: Use int array instead of bitmask for TX mixers
Currently slim_tx_mixer_get reports all TX mixers as enabled when
at least one is, due to it reading the entire tx_port_value bitmask
without testing the specific bit corresponding to a TX port.
Furthermore, using the same bitmask for all capture DAIs makes
setting one mixer affect them all. To prevent this, and since
the SLIM TX muxes effectively only connect to one of the mixers
at a time, turn tx_port_value into an int array storing the DAI
index each of the ports is connected to.
Sascha Hauer [Fri, 24 Jun 2022 10:57:16 +0000 (12:57 +0200)]
ASoC: tlv320adcx140: Fix tx_mask check
The tx_mask check doesn't reflect what the driver and the chip support.
The check currently checks for exactly two slots being enabled. The
tlv320adcx140 supports anything between one and eight channels, so relax
the check accordingly.
The tlv320adcx140 supports arbitrary tx_mask settings, but the driver
currently only supports adjacent slots beginning with the first slot,
so extend the check to check that the first slot is being used and that
there are no holes in the tx_mask.
Leave a comment to make it's the driver that limits the tx_mask
settings, not the chip itself.
While at it remove the set-but-unused struct adcx140p_priv::tdm_delay
field.
David Owens [Mon, 20 Jun 2022 18:37:43 +0000 (13:37 -0500)]
ASoC: ti: omap-mcbsp: duplicate sysfs error
Convert to managed versions of sysfs and clk allocation to simplify
unbinding and error handling in probe. Managed sysfs node
creation specifically addresses the following error seen the second time
probe is attempted after sdma_pcm_platform_register() previously requsted
probe deferral:
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() manually on the error
from the probe callback.
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
Egor Vorontsov [Mon, 27 Jun 2022 10:00:34 +0000 (13:00 +0300)]
ALSA: usb-audio: Add quirk for Fiero SC-01
Fiero SC-01 is a USB sound card with two mono inputs and a single
stereo output. The inputs are composed into a single stereo stream.
The device uses a vendor-provided driver on Windows and does not work
at all without it. The driver mostly provides ASIO functionality, but
also alters the way the sound card is queried for sample rates and
clocks.
ALSA queries those failing with an EPIPE (same as Windows 10 does).
Presumably, the vendor-provided driver does not query it at all, simply
matching by VID:PID. Thus, I consider this a buggy firmware and adhere
to a set of fixed endpoint quirks instead.
The soundcard has an internal clock. Implicit feedback mode is required
for the playback.
I have updated my device to v1.1.0 from a Windows 10 VM using a vendor-
provided binary prior to the development, hoping for it to just begin
working. The device provides no obvious way to downgrade the firmware,
and regardless, there's no binary available for v1.0.0 anyway.
Thus, I will be getting another unit to extend the patch with support
for that. Expected to be a simple copy-paste of the existing one,
though.
There were no previous reports of that device in context of Linux
anywhere. Other issues have been reported though, but that's out of the
scope.
John Veness [Fri, 24 Jun 2022 14:07:57 +0000 (15:07 +0100)]
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.
Charles Keepax [Thu, 23 Jun 2022 10:51:19 +0000 (11:51 +0100)]
ASoC: madera: Fix event generation for rate controls
madera_adsp_rate_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the
value is changed.
Charles Keepax [Thu, 23 Jun 2022 10:51:18 +0000 (11:51 +0100)]
ASoC: madera: Fix event generation for OUT1 demux
madera_out1_demux_put returns the value of
snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for
the kcontrol. This is obviously different to the expected return a 1 if
the control was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Charles Keepax [Thu, 23 Jun 2022 10:51:17 +0000 (11:51 +0100)]
ASoC: cs47l15: Fix event generation for low power mux control
cs47l15_in1_adc_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the value is
changed.
Charles Keepax [Thu, 23 Jun 2022 10:51:16 +0000 (11:51 +0100)]
ASoC: cs35l41: Add ASP TX3/4 source to register patch
The mixer controls for ASP TX3/4 are set to values that are not included
in their enumeration control. This will cause spurious event
notifications when the controls are first changed, as the register value
changes whilst the actual visible enumeration value does not. Use the
register patch to set them to a known value, zero, which equates to zero
fill, thereby avoiding the spurious notifications.
Charles Keepax [Thu, 23 Jun 2022 10:51:15 +0000 (11:51 +0100)]
ASoC: dapm: Initialise kcontrol data for mux/demux controls
DAPM keeps a copy of the current value of mux/demux controls,
however this value is only initialised in the case of autodisable
controls. This leads to false notification events when first
modifying a DAPM kcontrol that has a non-zero default.
Autodisable controls are left as they are, since they already
initialise the value, and there would be more work required to
support autodisable muxes where the first option isn't disabled
and/or that isn't the default.
Technically this issue could affect mixer/switch elements as well,
although not on any of the devices I am currently running. There
is also a little more work to do to address the issue there due to
that side supporting stereo controls, so that has not been tackled
in this patch.
Shuming Fan [Tue, 21 Jun 2022 09:07:19 +0000 (17:07 +0800)]
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
The initial settings will be written before the codec probe function.
But, the rt711->component doesn't be assigned yet.
If IO error happened during initial settings operations, it will cause the kernel panic.
This patch changed component->dev to slave->dev to fix this issue.
Judy Hsiao [Wed, 15 Jun 2022 04:56:43 +0000 (04:56 +0000)]
ASoC: rockchip: i2s: switch BCLK to GPIO
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch switches BCLK to GPIO func before LRCLK output, and
configures BCLK func back during LRCLK is output.
Without this fix, BCLK is turned on 11 ms earlier than LRCK by the
da7219.
With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by
the rockchip codec.
ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
The IMR was assumed to be preserved when suspending to S4 and S5
states, but community reports invalidate that assumption, the hardware
seems to be powered off and the IMR memory content cleared.
Make sure regular boot with firmware download is used for S4 and S5.
ASoC: SOF: pm: add definitions for S4 and S5 states
We currently don't have a means to differentiate between S3, S4 and
S5. Add definitions so that we have select different code paths
depending on the target state in follow-up patches.
Peter Ujfalusi [Thu, 16 Jun 2022 20:19:53 +0000 (15:19 -0500)]
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
Commit f27850a417a9 ("ASoC: SOF: Intel: hda: add quirks for HDAudio DMA position information")
modified the PCM path only, but left the compressed data patch using an
obsolete option.
Move the functionality in a helper that can be called for both PCM and
compressed data.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Fixes: f27850a417a9 ("ASoC: SOF: Intel: hda: add quirks for HDAudio DMA position information") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220616201953.130876-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Hans de Goede [Sun, 12 Jun 2022 15:56:52 +0000 (17:56 +0200)]
ASoC: Intel: bytcr_wm5102: Fix GPIO related probe-ordering problem
The "wlf,spkvdd-ena" GPIO needed by the bytcr_wm5102 driver
is made available through a gpio-lookup table.
This gpio-lookup table is registered by drivers/mfd/arizona-spi.c, which
may get probed after the bytcr_wm5102 driver.
If the gpio-lookup table has not registered yet then the gpiod_get()
will return -ENOENT. Treat -ENOENT as -EPROBE_DEFER to still keep
things working in this case.
Keyon Jie was a key contributor to the Intel ASoC and SOF Intel
drivers, but he's moved on to a different role within Intel. We wish
him all the best in his new endeavors.
Bard Liao, Kai Vehmanen, Ranjani Sridharan and Peter Ujfalusi have
been involved in the Intel multi-maintainer team, it's time to update
the MAINTAINERS entry to reflect their contributions and clarify their
role.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220610214313.42903-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Fri, 3 Jun 2022 12:25:26 +0000 (14:25 +0200)]
ASoC: wcd938x: Fix event generation for some controls
Currently wcd938x_*_put() unconditionally report that the value of the
control changed, resulting in spurious events being generated. Return 0 in
that case instead as we should. There is still an issue in the compander
control which is a bit more complex.
Mark Brown [Fri, 3 Jun 2022 12:46:09 +0000 (14:46 +0200)]
ASoC: wcd9335: Fix spurious event generation
The slimbus mux put operation unconditionally reports a change in value
which means that spurious events are generated. Fix this by exiting early
in that case.
Yassine Oudjana [Mon, 6 Jun 2022 15:22:26 +0000 (19:22 +0400)]
ASoC: wcd9335: Remove RX channel from old list before adding it to a new one
Currently in slim_rx_mux_put, an RX channel gets added to a new list
even if it is already in one. This can mess up links and make either
it, the new list head, or both, get linked to the wrong entries.
This can cause an entry to link to itself which in turn ends up
making list_for_each_entry in other functions loop infinitely.
To avoid issues, always remove the RX channel from any list it's in
before adding it to a new list.
Commit a299af034fc6 ("ASoC: remove codec hw_write/control_data") removed
use of hw_write_t in struct snd_soc_codec, but it left type definition.
Fully clean it up.
Peter Ujfalusi [Fri, 10 Jun 2022 08:47:35 +0000 (11:47 +0300)]
ASoC: SOF: ipc3-topology: Move and correct size checks in sof_ipc3_control_load_bytes()
Move the size checks prior to allocating memory as these checks do not need
the data to be allocated and in case of an error we would not need to free
the allocation.
The max size must not be less than the size of
struct sof_ipc_ctrl_data + struct sof_abi_hdr as the ABI header needs to
be present under all circumstances.
The check was incorrectly used or between the two size checks.
Fixes: 806f4f0b3d81 ("ASoC: SOF: topology: Make control parsing IPC agnostic") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220610084735.19397-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Thu, 9 Jun 2022 08:59:49 +0000 (11:59 +0300)]
ASoC: SOF: Intel: hda-loader: Clarify the cl_dsp_init() flow
Update the comment for the cl_dsp_init() to clarify what is done by the
function and use the chip->init_core_mask instead of BIT(0) when
unstalling/running the init core.
Peter Ujfalusi [Thu, 9 Jun 2022 08:59:48 +0000 (11:59 +0300)]
ASoC: SOF: Intel: hda-loader: Make sure that the fw load sequence is followed
The hda_dsp_enable_core() is powering up _and_ unstall the core in one
call while the first step of the firmware loading must not unstall the
core.
The core can be unstalled only after the set cpb_cfp and the configuration
of the IPC register for the ROM_CONTROL message.
The hda_dsp_core_power_up() needs to be exposed so that it can be used in
hda-loader.c to correct the boot flow.
The first step must not unstall the core, it should only power up the
core(s).
Add sanity check for the core_mask while exposing it to be safe.
ASoC: ak4613: cares Simple-Audio-Card case for TDM
Renesas is the only user of ak4613 on upstream for now, and
commit 1a0c74e5e05745 ("ASoC: ak4613: add TDM256 support")
added TDM256 support. Renesas tested part of it, because of
board connection.
It was assuming ak4613 is probed via Audio-Graph-Card, but it
might be probed via Simple-Audio-Card either.
It will indicates WARNING in such case. This patch fixup it.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/87h74v29f7.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: codecs: rt700/rt711/rt711-sdca: resume bus/codec in .set_jack_detect
The .set_jack_detect() codec component callback is invoked during card
registration, which happens when the machine driver is probed.
The issue is that this callback can race with the bus suspend/resume,
and IO timeouts can happen. This can be reproduced very easily if the
machine driver is 'blacklisted' and manually probed after the bus
suspends. The bus and codec need to be re-initialized using pm_runtime
helpers.
Previous contributions tried to make sure accesses to the bus during
the .set_jack_detect() component callback only happen when the bus is
active. This was done by changing the regcache status on a component
remove. This is however a layering violation, the regcache status
should only be modified on device probe, suspend and resume. The
component probe/remove should not modify how the device regcache is
handled. This solution also didn't handle all the possible race
conditions, and the RT700 headset codec was not handled.
This patch tries to resume the codec device before handling the jack
initializations. In case the codec has not yet been initialized,
pm_runtime may not be enabled yet, so we don't squelch the -EACCES
error code and only stop the jack information. When the codec reports
as attached, the jack initialization will proceed as usual.
ASoC: codecs: rt700/rt711/rt711-sdca: initialize workqueues in probe
The workqueues are initialized in the io_init functions, which isn't
quite right. In some tests, this leads to warnings throw from
__queue_delayed_work()
Realtek headset codec drivers typically check if the card is
instantiated before proceeding with the jack detection.
The rt700, rt711 and rt711-sdca are however missing a check on the
card pointer, which can lead to NULL dereferences encountered in
driver bind/unbind tests.
ASoC: Intel: sof_sdw: handle errors on card registration
If the card registration fails, typically because of deferred probes,
the device properties added for headset codecs are not removed, which
leads to kernel oopses in driver bind/unbind tests.
We already clean-up the device properties when the card is removed,
this code can be moved as a helper and called upon card registration
errors.
A quick check in the code shows that the 'calibrate_mutex' used by
this driver are not initialized at probe time. Moving the
initialization to the probe removes the issue.
Takashi Iwai [Fri, 24 Jun 2022 10:11:32 +0000 (12:11 +0200)]
ALSA: usb-audio: Workarounds for Behringer UMC 204/404 HD
Both Behringer UMC 202 HD and 404 HD need explicit quirks to enable
the implicit feedback mode and start the playback stream primarily.
The former seems fixing the stuttering and the latter is required for
a playback-only case.
Note that the "clock source 41 is not valid" error message still
appears even after this fix, but it should be only once at probe.
The reason of the error is still unknown, but this seems to be mostly
harmless as it's a one-off error and the driver retires the clock
setup and it succeeds afterwards.
Takashi Iwai [Tue, 21 Jun 2022 12:00:44 +0000 (14:00 +0200)]
ALSA: hda: Fix discovery of i915 graphics PCI device
It's been reported that the recent fix for skipping the
component-binding with D-GPU caused a regression on some systems; it
resulted in the completely missing component binding with i915 GPU.
The problem was the use of pci_get_class() function. It matches with
the full PCI class bits, while we want to match only partially the PCI
base class bits. So, when a system has an i915 graphics device with
the PCI class 0380, it won't hit because we're looking for only the
PCI class 0300.
This patch fixes i915_gfx_present() to look up each PCI device and
match with PCI base class explicitly instead of pci_get_class().
Takashi Iwai [Mon, 20 Jun 2022 10:40:08 +0000 (12:40 +0200)]
ALSA: hda/via: Fix missing beep setup
Like the previous fix for Conexant codec, the beep_nid has to be set
up before calling snd_hda_gen_parse_auto_config(); otherwise it'd miss
the path setup.
Fix the call order for addressing the missing beep setup.
Takashi Iwai [Mon, 20 Jun 2022 10:40:07 +0000 (12:40 +0200)]
ALSA: hda/conexant: Fix missing beep setup
Currently the Conexant codec driver sets up the beep NID after calling
snd_hda_gen_parse_auto_config(). It turned out that this results in
the insufficient setup for the beep control, as the generic parser
handles the fake path in snd_hda_gen_parse_auto_config() only if the
beep_nid is set up beforehand.
For dealing with the beep widget properly, call cx_auto_parse_beep()
before snd_hda_gen_parse_auto_config() call.
Takashi Iwai [Mon, 20 Jun 2022 07:34:40 +0000 (09:34 +0200)]
ALSA: memalloc: Drop x86-specific hack for WC allocations
The recent report for a crash on Haswell machines implied that the
x86-specific (rather hackish) implementation for write-cache memory
buffer allocation in ALSA core is buggy with the recent kernel in some
corner cases. This patch drops the x86-specific implementation and
uses the standard dma_alloc_wc() & co generically for avoiding the bug
and also for simplification.
ALSA: x86: intel_hdmi_audio: enable pm_runtime and set autosuspend delay
The existing code uses pm_runtime_get_sync/put_autosuspend, but
pm_runtime was not explicitly enabled. The autosuspend delay was not
set either, the value is set to 5s since HDMI is rather painful to
resume.
ALSA: hda: intel-dspcfg: use SOF for UpExtreme and UpExtreme11 boards
The UpExtreme BIOS reports microphones that are not physically
present, so this module ends-up selecting SOF, while the UpExtreme11
BIOS does not report microphones so the snd-hda-intel driver is
selected.
For consistency use SOF unconditionally in autodetection mode. The use
of the snd-hda-intel driver can still be enabled with
'options snd-intel-dspcfg dsp_driver=1'
Takashi Iwai [Tue, 14 Jun 2022 05:48:31 +0000 (07:48 +0200)]
ALSA: hda/realtek: Apply fixup for Lenovo Yoga Duet 7 properly
It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.
Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID. This patch implements that special fixup function.
For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver. The rest is simply calling it with a
different fixup ID depending on the codec ID.
Kailang Yang [Mon, 13 Jun 2022 06:57:19 +0000 (14:57 +0800)]
ALSA: hda/realtek - ALC897 headset MIC no sound
There is not have Headset Mic verb table in BIOS default.
So, it will have recording issue from headset MIC.
Add the verb table value without jack detect. It will turn on Headset Mic.
Soham Sen [Thu, 9 Jun 2022 18:19:20 +0000 (23:49 +0530)]
ALSA: hda/realtek: Add mute LED quirk for HP Omen laptop
The HP Omen 15 laptop needs a quirk to toggle the mute LED. It already is implemented for a different variant of the HP Omen laptop so a fixup entry is needed for this variant.
Takashi Iwai [Tue, 7 Jun 2022 12:11:38 +0000 (14:11 +0200)]
Merge tag 'asoc-fix-v5.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A few more fixes for v5.19 which came in during the second half of the
merge window, again nothing that's really remarkable outside of the
individual drivers.
Takashi Iwai [Mon, 6 Jun 2022 16:09:10 +0000 (18:09 +0200)]
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
Focusrite Saffire 6 has fixed audioformat quirks with multiple
endpoints assigned to a single altsetting. Unfortunately the generic
parser couldn't detect the sync endpoint correctly as the implicit
sync due to the missing EP attribute bits. In the former kernels, it
used to work somehow casually, but it's been broken for a while after
the large code change in 5.11.
This patch cures the regression by the following:
- Allow the static quirk table to provide the sync EP information;
we just need to fill the fields and let the generic parser skipping
parsing if sync_ep is already set.
- Add the sync endpoint information to the entry for Saffire 6.
Fixes: 06c75d4c5373 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks") Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220606160910.6926-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 6 Jun 2022 16:09:09 +0000 (18:09 +0200)]
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
When ep_idx is already non-zero, it means usually a capture stream
that is set up explicity by a fixed-format quirk, and applying the
check for generic (non-implicit-fb) sync EPs might hit incorrectly,
resulting in a bogus sync endpoint for the capture stream.
This patch adds a check for the ep_idx and skip if it's a secondary
endpoint. It's a part of the fixes for regressions on Saffire 6.
Fixes: 06c75d4c5373 ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks") Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220606160910.6926-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
projects / kernel.git / log