Linus Torvalds [Sat, 23 Oct 2021 03:42:13 +0000 (17:42 -1000)]
Merge tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Fix for the cgroup code not ussing irq safe stats updates, and one fix
for an error handling condition in add_partition()"
* tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
block: fix incorrect references to disk objects
blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu
Linus Torvalds [Sat, 23 Oct 2021 03:34:31 +0000 (17:34 -1000)]
Merge tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for the max workers limit API that was introduced this
series: one fix for an issue with that code, and one fixing a linked
timeout regression in this series"
* tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
io_uring: apply worker limits to previous users
io_uring: fix ltimeout unprep
io_uring: apply max_workers limit to all future users
io-wq: max_worker fixes
Linus Torvalds [Fri, 22 Oct 2021 20:39:47 +0000 (10:39 -1000)]
Merge tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Syzbot discovered a race in case of reusing the fuse sb (introduced in
this cycle).
Fix it by doing the s_fs_info initialization at the proper place"
* tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up error exits in fuse_fill_super()
fuse: always initialize sb->s_fs_info
fuse: clean up fuse_mount destruction
fuse: get rid of fuse_put_super()
fuse: check s_root when destroying sb
Arnd Bergmann [Mon, 18 Oct 2021 13:19:08 +0000 (15:19 +0200)]
hyperv/vmbus: include linux/bitops.h
On arm64 randconfig builds, hyperv sometimes fails with this
error:
In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]
Linus Torvalds [Fri, 22 Oct 2021 19:08:08 +0000 (09:08 -1000)]
Merge tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two regressions, one related to ACPI power resources
management and one that broke ACPI tools compilation.
Specifics:
- Stop turning off unused ACPI power resources in an unknown state to
address a regression introduced during the 5.14 cycle (Rafael
Wysocki).
- Fix an ACPI tools build issue introduced recently when the minimal
stdarg.h was added (Miguel Bernal Marin)"
* tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Do not turn off power resources in unknown state
ACPI: tools: fix compilation error
Linus Torvalds [Fri, 22 Oct 2021 19:02:15 +0000 (09:02 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more x86 kvm fixes from Paolo Bonzini:
- Cache coherency fix for SEV live migration
- Fix for instruction emulation with PKU
- fixes for rare delaying of interrupt delivery
- fix for SEV-ES buffer overflow
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: go over the sev_pio_data buffer in multiple passes if needed
KVM: SEV-ES: keep INS functions together
KVM: x86: remove unnecessary arguments from complete_emulator_pio_in
KVM: x86: split the two parts of emulator_pio_in
KVM: SEV-ES: clean up kvm_sev_es_ins/outs
KVM: x86: leave vcpu->arch.pio.count alone in emulator_pio_in_out
KVM: SEV-ES: rename guest_ins_data to sev_pio_data
KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATA
KVM: MMU: Reset mmu->pkru_mask to avoid stale data
KVM: nVMX: promptly process interrupts delivered while in guest mode
KVM: x86: check for interrupts before deciding whether to exit the fast path
Paolo Bonzini [Tue, 12 Oct 2021 15:33:03 +0000 (11:33 -0400)]
KVM: SEV-ES: go over the sev_pio_data buffer in multiple passes if needed
The PIO scratch buffer is larger than a single page, and therefore
it is not possible to copy it in a single step to vcpu->arch/pio_data.
Bound each call to emulator_pio_in/out to a single page; keep
track of how many I/O operations are left in vcpu->arch.sev_pio_count,
so that the operation can be restarted in the complete_userspace_io
callback.
For OUT, this means that the previous kvm_sev_es_outs implementation
becomes an iterator of the loop, and we can consume the sev_pio_data
buffer before leaving to userspace.
For IN, instead, consuming the buffer and decreasing sev_pio_count
is always done in the complete_userspace_io callback, because that
is when the memcpy is done into sev_pio_data.
Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reported-by: Felix Wilhelm <fwilhelm@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 12 Oct 2021 16:35:20 +0000 (12:35 -0400)]
KVM: x86: remove unnecessary arguments from complete_emulator_pio_in
complete_emulator_pio_in can expect that vcpu->arch.pio has been filled in,
and therefore does not need the size and count arguments. This makes things
nicer when the function is called directly from a complete_userspace_io
callback.
No functional change intended.
Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Oct 2021 16:32:02 +0000 (12:32 -0400)]
KVM: x86: split the two parts of emulator_pio_in
emulator_pio_in handles both the case where the data is pending in
vcpu->arch.pio.count, and the case where I/O has to be done via either
an in-kernel device or a userspace exit. For SEV-ES we would like
to split these, to identify clearly the moment at which the
sev_pio_data is consumed. To this end, create two different
functions: __emulator_pio_in fills in vcpu->arch.pio.count, while
complete_emulator_pio_in clears it and releases vcpu->arch.pio.data.
Because this patch has to be backported, things are left a bit messy.
kernel_pio() operates on vcpu->arch.pio, which leads to emulator_pio_in()
having with two calls to complete_emulator_pio_in(). It will be fixed
in the next release.
While at it, remove the unused void* val argument of emulator_pio_in_out.
The function currently hardcodes vcpu->arch.pio_data as the
source/destination buffer, which sucks but will be fixed after the more
severe SEV-ES buffer overflow.
No functional change intended.
Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 12 Oct 2021 14:51:55 +0000 (10:51 -0400)]
KVM: SEV-ES: clean up kvm_sev_es_ins/outs
A few very small cleanups to the functions, smushed together because
the patch is already very small like this:
- inline emulator_pio_in_emulated and emulator_pio_out_emulated,
since we already have the vCPU
- remove the data argument and pull setting vcpu->arch.sev_pio_data into
the caller
- remove unnecessary clearing of vcpu->arch.pio.count when
emulation is done by the kernel (and therefore vcpu->arch.pio.count
is already clear on exit from emulator_pio_in and emulator_pio_out).
No functional change intended.
Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 13 Oct 2021 16:29:42 +0000 (12:29 -0400)]
KVM: x86: leave vcpu->arch.pio.count alone in emulator_pio_in_out
Currently emulator_pio_in clears vcpu->arch.pio.count twice if
emulator_pio_in_out performs kernel PIO. Move the clear into
emulator_pio_out where it is actually necessary.
No functional change intended.
Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 12 Oct 2021 14:22:34 +0000 (10:22 -0400)]
KVM: SEV-ES: rename guest_ins_data to sev_pio_data
We will be using this field for OUTS emulation as well, in case the
data that is pushed via OUTS spans more than one page. In that case,
there will be a need to save the data pointer across exits to userspace.
So, change the name to something that refers to any kind of PIO.
Also spell out what it is used for, namely SEV-ES.
No functional change intended.
Cc: stable@vger.kernel.org Fixes: 7ed9abfe8e9f ("KVM: SVM: Support string IO operations for an SEV-ES guest") Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 22 Oct 2021 05:06:08 +0000 (19:06 -1000)]
Merge tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Nothing too crazy at the end of the cycle, the kmb modesetting fixes
are probably a bit large but it's not a major driver, and its fixing
monitor doesn't turn on type problems.
Otherwise it's just a few minor patches, one ast regression revert, an
msm power stability fix.
ast:
- fix regression with connector detect
msm:
- fix power stability issue
msxfb:
- fix crash on unload
panel:
- sync fix
kmb:
- modesetting fixes"
* tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/ast: Add detect function support"
drm/kmb: Enable ADV bridge after modeset
drm/kmb: Corrected typo in handle_lcd_irq
drm/kmb: Disable change of plane parameters
drm/kmb: Remove clearing DPHY regs
drm/kmb: Limit supported mode to 1080p
drm/kmb: Work around for higher system clock
drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel
drm: mxsfb: Fix NULL pointer dereference crash on unload
drm/msm/devfreq: Restrict idle clamping to a618 for now
Mike Rapoport [Thu, 21 Oct 2021 07:09:29 +0000 (10:09 +0300)]
memblock: exclude MEMBLOCK_NOMAP regions from kmemleak
Vladimir Zapolskiy reports:
Commit a7259df76702 ("memblock: make memblock_find_in_range method
private") invokes a kernel panic while running kmemleak on OF platforms
with nomaped regions:
Unable to handle kernel paging request at virtual address fff000021e00000
[...]
scan_block+0x64/0x170
scan_gray_list+0xe8/0x17c
kmemleak_scan+0x270/0x514
kmemleak_write+0x34c/0x4ac
The memory allocated from memblock is registered with kmemleak, but if
it is marked MEMBLOCK_NOMAP it won't have linear map entries so an
attempt to scan such areas will fault.
Ideally, memblock_mark_nomap() would inform kmemleak to ignore
MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces
operating on physical addresses can use __va() conversion.
Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP
take care of informing kmemleak to ignore such memory.
The crash happens because kmemleak_free_part_phys() tries to use __va()
before memstart_addr is initialized and this triggers a VM_BUG_ON() in
arch/arm64/include/asm/memory.h:
Revert 6e44bd6d34d6 ("memblock: exclude NOMAP regions from kmemleak"),
the issue it is fixing will be fixed differently.
Reported-by: Qian Cai <quic_qiancai@quicinc.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 22 Oct 2021 03:27:17 +0000 (17:27 -1000)]
Merge branch 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucounts fixes from Eric Biederman:
"There has been one very hard to track down bug in the ucount code that
we have been tracking since roughly v5.14 was released. Alex managed
to find a reliable reproducer a few days ago and then I was able to
instrument the code and figure out what the issue was.
It turns out the sigqueue_alloc single atomic operation optimization
did not play nicely with ucounts multiple level rlimits. It turned out
that either sigqueue_alloc or sigqueue_free could be operating on
multiple levels and trigger the conditions for the optimization on
more than one level at the same time.
To deal with that situation I have introduced inc_rlimit_get_ucounts
and dec_rlimit_put_ucounts that just focuses on the optimization and
the rlimit and ucount changes.
While looking into the big bug I found I couple of other little issues
so I am including those fixes here as well.
When I have time I would very much like to dig into process ownership
of the shared signal queue and see if we could pick a single owner for
the entire queue so that all of the rlimits can count to that owner.
That should entirely remove the need to call get_ucounts and
put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult
because Linux unlike POSIX supports setuid that works on a single
thread"
* 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
ucounts: Proper error handling in set_cred_ucounts
ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
ucounts: Fix signal ucount refcounting
Linus Torvalds [Fri, 22 Oct 2021 01:36:50 +0000 (15:36 -1000)]
Merge tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and can.
We'll have one more fix for a socket accounting regression, it's still
getting polished. Otherwise things look fine.
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv", there are
valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv abort sessions on
receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails, prevent
stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues"
* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
usbnet: sanity check for maxpacket
net: enetc: make sure all traffic classes can send large frames
net: enetc: fix ethtool counter name for PM0_TERR
ptp: free 'vclock_index' in ptp_clock_release()
sfc: Don't use netif_info before net_device setup
sfc: Export fibre-specific supported link modes
net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
net/mlx5e: IPsec: Fix a misuse of the software parser's fields
net/mlx5e: Fix vlan data lost during suspend flow
net/mlx5: E-switch, Return correct error code on group creation failure
net/mlx5: Lag, change multipath and bonding to be mutually exclusive
ice: Add missing E810 device ids
igc: Update I226_K device ID
e1000e: Fix packet loss on Tiger Lake and later
e1000e: Separate TGP board type from SPT
ptp: Fix possible memory leak in ptp_clock_register()
net: stmmac: Fix E2E delay mechanism
nfc: st95hf: Make spi remove() callback return zero
net: hns3: disable sriov before unload hclge layer
net: hns3: fix vf reset workqueue cannot exit
...
Linus Torvalds [Fri, 22 Oct 2021 01:30:09 +0000 (15:30 -1000)]
Merge tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug exposed by a previous fix, where running guests with
certain SMT topologies could crash the host on Power8.
- Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is
enabled.
Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider.
* tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/smp: do not decrement idle task preempt count in CPU offline
powerpc/idle: Don't corrupt back chain when going idle
Pavel Begunkov [Thu, 21 Oct 2021 12:20:29 +0000 (13:20 +0100)]
io_uring: apply worker limits to previous users
Another change to the API io-wq worker limitation API added in 5.15,
apply the limit to all prior users that already registered a tctx. It
may be confusing as it's now, in particular the change covers the
following 2 cases:
A note on locking, it's safe to traverse ->tctx_list as we hold
->uring_lock, but do that after dropping sqd->lock to avoid possible
problems. It's also safe to access tctx->io_wq there because tasks
kill it only after removing themselves from tctx_list, see
io_uring_cancel_generic() -> io_uring_clean_tctx()
KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATA
Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the
PSP encrypts the data with the guest's key when writing to guest memory.
If the target memory was not previously encrypted, the cache may contain
dirty, unecrypted data that will persist on non-coherent systems.
Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Masahiro Kozuka <masa.koz@kozuka.jp>
[sean: converted bug report to changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210914210951.2994260-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Chenyi Qiang [Thu, 21 Oct 2021 07:10:22 +0000 (15:10 +0800)]
KVM: MMU: Reset mmu->pkru_mask to avoid stale data
When updating mmu->pkru_mask, the value can only be added but it isn't
reset in advance. This will make mmu->pkru_mask keep the stale data.
Fix this issue.
Fixes: 2d344105f57c ("KVM, pkeys: introduce pkru_mask to cache conditions") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20211021071022.1140-1-chenyi.qiang@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vladimir Oltean [Wed, 20 Oct 2021 17:33:40 +0000 (20:33 +0300)]
net: enetc: make sure all traffic classes can send large frames
The enetc driver does not implement .ndo_change_mtu, instead it
configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU]
statically to a large value during probe time.
The driver used to configure only the max SDU for traffic class 0, and
that was fine while the driver could only use traffic class 0. But with
the introduction of mqprio, sending a large frame into any other TC than
0 is broken.
This patch fixes that by replicating per traffic class the static
configuration done in enetc_configure_port_mac().
Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 20 Oct 2021 16:52:06 +0000 (19:52 +0300)]
net: enetc: fix ethtool counter name for PM0_TERR
There are two counters named "MAC tx frames", one of them is actually
incorrect. The correct name for that counter should be "MAC tx error
frames", which is symmetric to the existing "MAC rx error frames".
Erik Ekman [Tue, 19 Oct 2021 21:13:32 +0000 (23:13 +0200)]
sfc: Export fibre-specific supported link modes
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
10GbaseT was likely used since no 10G fibre mode existed.
The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
("net: ethtool: add support for 1000BaseX and missing 10G link modes")
shortly thereafter.
The user guide available at https://support-nic.xilinx.com/wp/drivers
lists support for the following cable and transceiver types in section 2.9:
- QSFP28 100G Direct Attach Cables
- QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
- SFP28 25G Direct Attach Cables
- SFP28 25G SR Optical Transceivers
- QSFP+ 40G Direct Attach Cables
- QSFP+ 40G Active Optical Cables
- QSFP+ 40G SR4 Optical Transceivers
- QSFP+ to SFP+ Breakout Direct Attach Cables
- QSFP+ to SFP+ Breakout Active Optical Cables
- SFP+ 10G Direct Attach Cables
- SFP+ 10G SR Optical Transceivers
- SFP+ 10G LR Optical Transceivers
- SFP 1000BASE‐T Transceivers
- 1G Optical Transceivers
(From user guide issue 28. Issue 16 which also includes older cards like
SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
"Solarflare adapters do not support 10GBASE‐T transceiver modules."
Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
Before:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
After:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Supports Wake-on: g
Wake-on: d
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.
v2: changed to atomic_bridge_chain_enable (Sam)
Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Edmund Dea [Tue, 20 Apr 2021 22:31:53 +0000 (15:31 -0700)]
drm/kmb: Remove clearing DPHY regs
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during
DSI initialization since this was causing MIPI Rx reset. Rest of the
writes are bitwise, so will not affect Mipi Rx side.
Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
KMB only supports single resolution(1080p), this commit checks for
1920x1080x60 or 1920x1080x59 in crtc_mode_valid.
Also, modes with vfp < 4 are not supported in KMB display. This change
prunes display modes with vfp < 4.
v2: added vfp check
Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Marek Vasut [Sat, 16 Oct 2021 21:04:46 +0000 (23:04 +0200)]
drm: mxsfb: Fix NULL pointer dereference crash on unload
The mxsfb->crtc.funcs may already be NULL when unloading the driver,
in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from
mxsfb_unload() leads to NULL pointer dereference.
Since all we care about is masking the IRQ and mxsfb->base is still
valid, just use that to clear and mask the IRQ.
Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Miklos Szeredi [Thu, 21 Oct 2021 08:01:39 +0000 (10:01 +0200)]
fuse: always initialize sb->s_fs_info
Syzkaller reports a null pointer dereference in fuse_test_super() that is
caused by sb->s_fs_info being NULL.
This is due to the fact that fuse_fill_super() is initializing s_fs_info,
which is too late, it's already on the fs_supers list. The initialization
needs to be done in sget_fc() with the sb_lock held.
Move allocation of fuse_mount and fuse_conn from fuse_fill_super() into
fuse_get_tree().
After this ->kill_sb() will always be called with non-NULL ->s_fs_info,
hence fuse_mount_destroy() can drop the test for non-NULL "fm".
Miklos Szeredi [Thu, 21 Oct 2021 08:01:38 +0000 (10:01 +0200)]
fuse: get rid of fuse_put_super()
The ->put_super callback is called from generic_shutdown_super() in case of
a fully initialized sb. This is called from kill_***_super(), which is
called from ->kill_sb instances.
Fuse uses ->put_super to destroy the fs specific fuse_mount and drop the
reference to the fuse_conn, while it does the same on each error case
during sb setup.
This patch moves the destruction from fuse_put_super() to
fuse_mount_destroy(), called at the end of all ->kill_sb instances. A
follup patch will clean up the error paths.
Miklos Szeredi [Thu, 21 Oct 2021 08:01:38 +0000 (10:01 +0200)]
fuse: check s_root when destroying sb
Checking "fm" works because currently sb->s_fs_info is cleared on error
paths; however, sb->s_root is what generic_shutdown_super() checks to
determine whether the sb was fully initialized or not.
This change will allow cleanup of sb setup error paths.
Paolo Bonzini [Wed, 20 Oct 2021 10:22:59 +0000 (06:22 -0400)]
KVM: nVMX: promptly process interrupts delivered while in guest mode
Since commit c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with
more precise fix") there is no longer the certainty that check_nested_events()
tries to inject an external interrupt vmexit to L1 on every call to vcpu_enter_guest.
Therefore, even in that case we need to set KVM_REQ_EVENT. This ensures
that inject_pending_event() is called, and from there kvm_check_nested_events().
Fixes: c300ab9f08df ("KVM: x86: Replace late check_nested_events() hack with more precise fix") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 20 Oct 2021 10:27:36 +0000 (06:27 -0400)]
KVM: x86: check for interrupts before deciding whether to exit the fast path
The kvm_x86_sync_pir_to_irr callback can sometimes set KVM_REQ_EVENT.
If that happens exactly at the time that an exit is handled as
EXIT_FASTPATH_REENTER_GUEST, vcpu_enter_guest will go incorrectly
through the loop that calls kvm_x86_run, instead of processing
the request promptly.
Fixes: 379a3c8ee444 ("KVM: VMX: Optimize posted-interrupt delivery for timer fastpath") Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Wed, 20 Oct 2021 20:23:05 +0000 (10:23 -1000)]
Merge tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two important filesystem fixes, marked for stable.
The blocklisted superblocks issue was particularly annoying because
for unexperienced users it essentially exacted a reboot to establish a
new functional mount in that scenario"
* tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client:
ceph: fix handling of "meta" errors
ceph: skip existing superblocks that are blocklisted or shut down when mounting
Linus Torvalds [Wed, 20 Oct 2021 20:16:51 +0000 (10:16 -1000)]
Merge tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix more dma-debug fallout (Gerald Schaefer, Hamza Mahfooz)
- fix a kerneldoc warning (Logan Gunthorpe)
* tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC
dma-debug: fix sg checks in debug_dma_map_sg()
dma-mapping: fix the kerneldoc for dma_map_sgtable()
Emeel Hakim [Mon, 18 Oct 2021 12:31:19 +0000 (15:31 +0300)]
net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
Current Work Queue Entry (WQE) checksum (csum) flags in the ethernet
segment (eseg) in case of IPsec crypto offload datapath are not aligned
with PRM/HW expectations.
Currently the driver always sets the l3_inner_csum flag in case of IPsec
because of the wrong usage of skb->encapsulation as indicator for inner
IPsec header since skb->encapsulation is always ON for IPsec packets
since IPsec itself is an encapsulation protocol. The above forced a
failing attempts of calculating csum of non-existing segments (like in
the IP|ESP|TCP packet case which does not have an l3_inner) which led
to lots of packet drops hence the low throughput.
Fix by using xo->inner_ipproto as indicator for inner IPsec header
instead of skb->encapsulation in addition to setting the csum flags
as following:
* Tunnel Mode:
* Pkt: MAC IP ESP IP L4
* CSUM: l3_cs | l3_inner_cs | l4_inner_cs
*
* Transport Mode:
* Pkt: MAC IP ESP L4
* CSUM: l3_cs [ | l4_cs (checksum partial case)]
*
* Tunnel(VXLAN TCP/UDP) over Transport Mode
* Pkt: MAC IP ESP UDP VXLAN IP L4
* CSUM: l3_cs | l3_inner_cs | l4_inner_cs
Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Emeel Hakim [Mon, 18 Oct 2021 12:30:09 +0000 (15:30 +0300)]
net/mlx5e: IPsec: Fix a misuse of the software parser's fields
IPsec crypto offload current Software Parser (SWP) fields settings in
the ethernet segment (eseg) are not aligned with PRM/HW expectations.
Among others in case of IP|ESP|TCP packet, current driver sets the
offsets for inner_l3 and inner_l4 although there is no inner l3/l4
headers relative to ESP header in such packets.
SWP provides the offsets for HW ,so it can be used to find csum fields
to offload the checksum, however these are not necessarily used by HW
and are used as fallback in case HW fails to parse the packet, e.g
when performing IPSec Transport Aware (IP | ESP | TCP) there is no
need to add SW parse on inner packet. So in some cases packets csum
was calculated correctly , whereas in other cases it failed. The later
faced csum errors (caused by wrong packet length calculations) which
led to lots of packet drops hence the low throughput.
Fix by setting the SWP fields as expected in a IP|ESP|TCP packet.
the following describe the expected SWP offsets:
* Tunnel Mode:
* SWP: OutL3 InL3 InL4
* Pkt: MAC IP ESP IP L4
*
* Transport Mode:
* SWP: OutL3 OutL4
* Pkt: MAC IP ESP L4
*
* Tunnel(VXLAN TCP/UDP) over Transport Mode
* SWP: OutL3 InL3 InL4
* Pkt: MAC IP ESP UDP VXLAN IP L4
Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Moshe Shemesh [Sat, 2 Oct 2021 08:15:35 +0000 (11:15 +0300)]
net/mlx5e: Fix vlan data lost during suspend flow
During suspend flow the driver calls mlx5e_destroy_vlan_table() which
does not only delete the vlans steering flow rules, but also frees the
data on currently active vlans, thus it is not restored during resume
flow.
This fix keeps the vlan data on suspend flow and frees it only on driver
remove flow.
Dmytro Linkin [Wed, 25 Aug 2021 14:51:26 +0000 (17:51 +0300)]
net/mlx5: E-switch, Return correct error code on group creation failure
Dan Carpenter report:
The patch f47e04eb96e0: "net/mlx5: E-switch, Allow setting share/max
tx rate limits of rate groups" from May 31, 2021, leads to the
following Smatch static checker warning:
drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c:483 esw_qos_create_rate_group()
warn: passing zero to 'ERR_PTR'
If min rate normalization failed then error code may be overwritten to 0
if scheduling element destruction succeed. Ignore this value and always
return initial one.
Fixes: f47e04eb96e0 ("net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Dickman [Thu, 7 Oct 2021 13:05:38 +0000 (16:05 +0300)]
net/mlx5: Lag, change multipath and bonding to be mutually exclusive
Both multipath and bonding events are changing the HW LAG state
independently.
Handling one of the features events while the other is already
enabled can cause unwanted behavior, for example handling
bonding event while multipath enabled will disable the lag and
cause multipath to stop working.
Fix it by ignoring bonding event while in multipath and ignoring FIB
events while in bonding mode.
Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Linus Torvalds [Wed, 20 Oct 2021 16:13:22 +0000 (06:13 -1000)]
Merge tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Again it became bigger than wished, unfortunately, as this contains
quite a few ASoC fixes that came up a bit late. It also includes yet
more HD- and USB-audio quirks: I decided to merge them now, as those
are for stable, and we'll need them sooner or later.
Although the volumes are a bit high, all changes are device-specific
(and reasonably small) fixes, so it should be safe for the late rc"
* tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix microphone sound on Jieli webcam.
ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers
ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset
ALSA: hda/realtek: Add quirk for Clevo PC50HS
ALSA: usb-audio: add Schiit Hel device to quirk table
ASoC: wm8960: Fix clock configuration on slave mode
ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets
ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked()
ASoC: codec: wcd938x: Add irq config support
ASoC: DAPM: Fix missing kctl change notifications
ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation
ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()
ASoC: Intel: bytcht_es8316: Use temporary variable for struct device
ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()
ASoC: wcd938x: Fix jack detection issue
ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working
ASoC: cs4341: Add SPI device ID table
ASoC: pcm179x: Add missing entries SPI to device ID table
ASoC: fsl_xcvr: Fix channel swap issue with ARC
ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers
Linus Torvalds [Wed, 20 Oct 2021 16:11:17 +0000 (06:11 -1000)]
Merge tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"One small audit patch to add a pointer NULL check"
* tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix possible null-pointer dereference in audit_filter_rules
Update the HW MAC initialization flow. Do not gate DMA clock from
the modPHY block. Keeping this clock will prevent dropped packets
sent in burst mode on the Kumeran interface.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 20 Oct 2021 16:02:58 +0000 (06:02 -1000)]
Merge tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Recursion fix for tracing.
While cleaning up some of the tracing recursion protection logic, I
discovered a scenario that the current design would miss, and would
allow an infinite recursion. Removing an optimization trick that
opened the hole fixes the issue and cleans up the code as well"
* tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have all levels of checks prevent recursion
Pavel Begunkov [Wed, 20 Oct 2021 08:53:02 +0000 (09:53 +0100)]
io_uring: fix ltimeout unprep
io_unprep_linked_timeout() is broken, first it needs to return back
REQ_F_ARM_LTIMEOUT, so the linked timeout is enqueued and disarmed. But
now we refcounted it, and linked timeouts may get not executed at all,
leaking a request.
Pavel Begunkov [Tue, 19 Oct 2021 22:43:46 +0000 (23:43 +0100)]
io_uring: apply max_workers limit to all future users
Currently, IORING_REGISTER_IOWQ_MAX_WORKERS applies only to the task
that issued it, it's unexpected for users. If one task creates a ring,
limits workers and then passes it to another task the limit won't be
applied to the other task.
Another pitfall is that a task should either create a ring or submit at
least one request for IORING_REGISTER_IOWQ_MAX_WORKERS to work at all,
furher complicating the picture.
Change the API, save the limits and apply to all future users. Note, it
should be done first before giving away the ring or submitting new
requests otherwise the result is not guaranteed.
Linus Torvalds [Wed, 20 Oct 2021 15:52:10 +0000 (05:52 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Tools:
- kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic
x86:
- clean ups and fixes for bus lock vmexit and lazy allocation of rmaps
- two fixes for SEV-ES (one more coming as soon as I get reviews)
- fix for static_key underflow
ARM:
- Properly refcount pages used as a concatenated stage-2 PGD
- Fix missing unlock when detecting the use of MTE+VM_SHARED"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: reduce ghcb_sa_len to 32 bits
KVM: VMX: Remove redundant handling of bus lock vmexit
KVM: kvm_stat: do not show halt_wait_ns
KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload
Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET"
KVM: SEV-ES: Set guest_state_protected after VMSA update
KVM: X86: fix lazy allocation of rmaps
KVM: SEV-ES: fix length of string I/O
KVM: arm64: Release mmap_lock when using VM_SHARED with MTE
KVM: arm64: Report corrupted refcount at EL2
KVM: arm64: Fix host stage-2 PGD refcount
KVM: s390: Function documentation fixes
We have the same LAN controller on different PCHs. Separate TGP board
type from SPT which will allow for specific fixes to be applied for
TGP platforms.
Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
Setting cred->ucounts in cred_alloc_blank does not make sense. The
uid and user_ns are deliberately not set in cred_alloc_blank but
instead the setting is delayed until key_change_session_keyring.
So move dealing with ucounts into key_change_session_keyring as well.
Unfortunately that movement of get_ucounts adds a new failure mode to
key_change_session_keyring. I do not see anything stopping the parent
process from calling setuid and changing the relevant part of it's
cred while keyctl_session_to_parent is running making it fundamentally
necessary to call get_ucounts in key_change_session_keyring. Which
means that the new failure mode cannot be avoided.
A failure of key_change_session_keyring results in a single threaded
parent keeping it's existing credentials. Which results in the parent
process not being able to access the session keyring and whichever
keys are in the new keyring.
Further get_ucounts is only expected to fail if the number of bits in
the refernece count for the structure is too few.
Since the code has no other way to report the failure of get_ucounts
and because such failures are not expected to be common add a WARN_ONCE
to report this problem to userspace.
Between the WARN_ONCE and the parent process not having access to
the keys in the new session keyring I expect any failure of get_ucounts
will be noticed and reported and we can find another way to handle this
condition. (Possibly by just making ucounts->count an atomic_long_t).
Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/7k0ias0uf.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When posix_clock_register() returns an error, the name allocated
in dev_set_name() will be leaked, the put_device() should be used
to give up the device reference, then the name will be freed in
kobject_cleanup() and other memory will be freed in ptp_clock_release().
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach [Wed, 20 Oct 2021 07:04:33 +0000 (09:04 +0200)]
net: stmmac: Fix E2E delay mechanism
When utilizing End to End delay mechanism, the following error messages show up:
|root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m
|ptp4l[950.573]: selected /dev/ptp3 as PTP clock
|ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE
|ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE
|ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1
|ptp4l[956.879]: selected best master clock 001395.fffe.4897b4
|ptp4l[956.879]: port 1: assuming the grand master role
|ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER
|ptp4l[962.017]: port 1: received DELAY_REQ without timestamp
|ptp4l[962.273]: port 1: received DELAY_REQ without timestamp
|ptp4l[963.090]: port 1: received DELAY_REQ without timestamp
Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP
packets in dwmac v5.10a") already addresses this problem for the dwmac
v5.10. However, same holds true for all dwmacs above version v4.10. Correct the
check accordingly. Afterwards everything works as expected.
Tested on Intel Atom(R) x6414RE Processor.
Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Tue, 19 Oct 2021 20:49:16 +0000 (22:49 +0200)]
nfc: st95hf: Make spi remove() callback return zero
If something goes wrong in the remove callback, returning an error code
just results in an error message. The device still disappears.
So don't skip disabling the regulator in st95hf_remove() if resetting
the controller via spi fails. Also don't return an error code which just
results in two error messages.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li [Tue, 19 Oct 2021 14:16:35 +0000 (22:16 +0800)]
net: hns3: disable sriov before unload hclge layer
HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko.
hns3.ko includes network stack and pci_driver, hclge.ko includes
HW device action, algo_ops and timer task, hnae3.ko includes some
register function.
When SRIOV is enable and hclge.ko is removed, HW device is unloaded
but VF still exists, PF will not reply VF mbx messages, and cause
errors.
This patch fix it by disable SRIOV before remove hclge.ko.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yufeng Mo [Tue, 19 Oct 2021 14:16:34 +0000 (22:16 +0800)]
net: hns3: fix vf reset workqueue cannot exit
The task of VF reset is performed through the workqueue. It checks the
value of hdev->reset_pending to determine whether to exit the loop.
However, the value of hdev->reset_pending may also be assigned by
the interrupt function hclgevf_misc_irq_handle(), which may cause the
loop fail to exit and keep occupying the workqueue. This loop is not
necessary, so remove it and the workqueue will be rescheduled if the
reset needs to be retried or a new reset occurs.
Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Tue, 19 Oct 2021 14:16:33 +0000 (22:16 +0800)]
net: hns3: schedule the polling again when allocation fails
Currently when there is a rx page allocation failure, it is
possible that polling may be stopped if there is no more packet
to be reveiced, which may cause queue stall problem under memory
pressure.
This patch makes sure polling is scheduled again when there is
any rx page allocation failure, and polling will try to allocate
receive buffers until it succeeds.
Now the allocation retry is added, it is unnecessary to do the rx
page allocation at the end of rx cleaning, so remove it. And reset
the unused_count to zero after calling hns3_nic_alloc_rx_buffers()
to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under
memory pressure.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Tue, 19 Oct 2021 14:16:32 +0000 (22:16 +0800)]
net: hns3: fix for miscalculation of rx unused desc
rx unused desc is the desc that need attatching new buffer
before refilling to hw to receive new packet, the number of
desc need attatching new buffer is calculated using next_to_use
and next_to_clean. when next_to_use == next_to_clean, currently
hns3 driver assumes that all the desc has the buffer attatched,
but 'next_to_use == next_to_clean' also means all the desc need
attatching new buffer if hw has comsumed all the desc and the
driver has not attatched any buffer to the desc yet.
This patch adds 'refill' in desc_cb to indicate whether a new
buffer has been refilled to a desc.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yunsheng Lin [Tue, 19 Oct 2021 14:16:31 +0000 (22:16 +0800)]
net: hns3: fix the max tx size according to user manual
Currently the max tx size supported by the hw is calculated by
using the max BD num supported by the hw. According to the hw
user manual, the max tx size is fixed value for both non-TSO and
TSO skb.
This patch updates the max tx size according to the manual.
Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 19 Oct 2021 14:16:30 +0000 (22:16 +0800)]
net: hns3: add limit ets dwrr bandwidth cannot be 0
If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP
mode. In this case, this tc may occupy all the tx bandwidth if it has
huge traffic, so it violates the purpose of the user setting.
To fix this problem, limit the ets dwrr bandwidth must greater than 0.
Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang [Tue, 19 Oct 2021 14:16:29 +0000 (22:16 +0800)]
net: hns3: reset DWRR of unused tc to zero
Currently, DWRR of tc will be initialized to a fixed value when this tc
is enabled, but it is not been reset to 0 when this tc is disabled. It
cause a problem that the DWRR of unused tc is not 0 after using tc tool
to add and delete multi-tc parameters.
For examples, after enabling 4 TCs and restoring to 1 TC by follow
tc commands:
This patch fixes it by resetting DWRR of tc to 0 when tc is disabled.
Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiaran Zhang [Tue, 19 Oct 2021 14:16:28 +0000 (22:16 +0800)]
net: hns3: Add configuration of TM QCN error event
Add configuration of interrupt type and fifo interrupt enable of TM QCN
error event if enabled, otherwise this event will not be reported when
there is error.
Fixes: d914971df022 ("net: hns3: remove redundant query in hclge_config_tm_hw_err_int()") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Lynch [Fri, 15 Oct 2021 17:39:02 +0000 (12:39 -0500)]
powerpc/smp: do not decrement idle task preempt count in CPU offline
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:
BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
dump_stack_lvl+0xac/0x108
__schedule_bug+0xac/0xe0
__schedule+0xcf8/0x10d0
schedule_idle+0x3c/0x70
do_idle+0x2d8/0x4a0
cpu_startup_entry+0x38/0x40
start_secondary+0x2ec/0x3a0
start_secondary_prolog+0x10/0x14
This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."
However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.
The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.
Tested with pseries and powernv in qemu, and pseries on PowerVM.
Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
Michael Ellerman [Wed, 20 Oct 2021 09:48:26 +0000 (20:48 +1100)]
powerpc/idle: Don't corrupt back chain when going idle
In isa206_idle_insn_mayloss() we store various registers into the stack
red zone, which is allowed.
However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again,
to 0(r1), which corrupts the stack back chain.
We used to do the same in isa206_idle_insn_mayloss() itself, but we
fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving
GPRs"), however we missed that the macro also corrupts the back chain.
Corrupting the back chain is bad for debuggability but doesn't
necessarily cause a bug.
However we recently changed the stack handling in some KVM code, and it
now relies on the stack back chain being valid when it returns. The
corruption causes that code to return with r1 pointing somewhere in
kernel data, at some point LR is restored from the stack and we branch
to NULL or somewhere else invalid.
Only affects Power8 hosts running KVM guests, with dynamic_mt_modes
enabled (which it is by default).
The fixes tag below points to the commit that changed the KVM stack
handling, exposing this bug. The actual corruption of the back chain has
always existed since 948cf67c4726 ("powerpc: Add NAP mode support on
Power7 in HV mode").
When an interface is enslaved in a VRF, prerouting conntrack hook is
called twice: once in the context of the original input interface, and
once in the context of the VRF interface. If no special precausions are
taken, this leads to creation of two conntrack entries instead of one,
and breaks SNAT.
Commit above was intended to avoid creation of extra conntrack entries
when input interface is enslaved in a VRF. It did so by resetting
conntrack related data associated with the skb when it enters VRF context.
However it breaks netfilter operation. Imagine a use case when conntrack
zone must be assigned based on the original input interface, rather than
VRF interface (that would make original interfaces indistinguishable). One
could create netfilter rules similar to these:
chain rawprerouting {
type filter hook prerouting priority raw;
iif realiface1 ct zone set 1 return
iif realiface2 ct zone set 2 return
}
This works before the mentioned commit, but not after: zone assignment
is "forgotten", and any subsequent NAT or filtering that is dependent
on the conntrack zone does not work.
Here is a reproducer script that demonstrates the difference in behaviour.
==========
#!/bin/sh
# This script demonstrates unexpected change of nftables behaviour
# caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack
# connection on VRF rcv"
# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1
#
# Before the commit, it was possible to assign conntrack zone to a
# packet (or mark it for `notracking`) in the prerouting chanin, raw
# priority, based on the `iif` (interface from which the packet
# arrived).
# After the change, # if the interface is enslaved in a VRF, such
# assignment is lost. Instead, assignment based on the `iif` matching
# the VRF master interface is honored. Thus it is impossible to
# distinguish packets based on the original interface.
#
# This script demonstrates this change of behaviour: conntrack zone 1
# or 2 is assigned depending on the match with the original interface
# or the vrf master interface. It can be observed that conntrack entry
# appears in different zone in the kernel versions before and after
# the commit.
IPIN=172.30.30.1
IPOUT=172.30.30.2
PFXL=30
ip li sh vein >/dev/null 2>&1 && ip li del vein
ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf
nft list table testct >/dev/null 2>&1 && nft delete table testct
ip li add vein type veth peer veout
ip li add tvrf type vrf table 9876
ip li set veout master tvrf
ip li set vein up
ip li set veout up
ip li set tvrf up
/sbin/sysctl -w net.ipv4.conf.veout.accept_local=1
/sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0
ip addr add $IPIN/$PFXL dev vein
ip addr add $IPOUT/$PFXL dev veout
nft -f - <<__END__
table testct {
chain rawpre {
type filter hook prerouting priority raw;
iif { veout, tvrf } meta nftrace set 1
iif veout ct zone set 1 return
iif tvrf ct zone set 2 return
notrack
}
chain rawout {
type filter hook output priority raw;
notrack
}
}
__END__
Pavel Begunkov [Tue, 19 Oct 2021 19:31:26 +0000 (20:31 +0100)]
io-wq: max_worker fixes
First, fix nr_workers checks against max_workers, with max_worker
registration, it may pretty easily happen that nr_workers > max_workers.
Also, synchronise writing to acct->max_worker with wqe->lock. It's not
an actual problem, but as we don't care about io_wqe_create_worker(),
it's better than WRITE_ONCE()/READ_ONCE().
ACPI: PM: Do not turn off power resources in unknown state
Commit 6381195ad7d0 ("ACPI: power: Rework turning off unused power
resources") caused power resources in unknown state with reference
counters equal to zero to be turned off too, but that caused issues
to appear in the field, so modify the code to only turn off power
resources that are known to be "on".
Link: https://lore.kernel.org/linux-acpi/6faf4b92-78d5-47a4-63df-cc2bab7769d0@molgen.mpg.de/ Fixes: 6381195ad7d0 ("ACPI: power: Rework turning off unused power resources") Reported-by: Andreas K. Huettel <andreas.huettel@ur.de> Tested-by: Andreas K. Huettel <andreas.huettel@ur.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
ucounts: Proper error handling in set_cred_ucounts
Instead of leaking the ucounts in new if alloc_ucounts fails, store
the result of alloc_ucounts into a temporary variable, which is later
assigned to new->ucounts.
Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/87pms2s0v8.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
The purpose of inc_rlimit_ucounts and dec_rlimit_ucounts in commit_creds
is to change which rlimit counter is used to track a process when the
credentials changes.
Use the same test for both to guarantee the tracking is correct.
Cc: stable@vger.kernel.org Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Link: https://lkml.kernel.org/r/87v91us0w4.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Linus Torvalds [Tue, 19 Oct 2021 15:41:36 +0000 (05:41 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"19 patches.
Subsystems affected by this patch series: mm (userfaultfd, migration,
memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs,
and misc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: add Andrej Shadura
mm/thp: decrease nr_thps in file's mapping on THP split
mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem()
vfs: check fd has read access in kernel_read_file_from_fd()
elfcore: correct reference to CONFIG_UML
mm, slub: fix incorrect memcg slab count for bulk free
mm, slub: fix potential use-after-free in slab_debugfs_fops
mm, slub: fix potential memoryleak in kmem_cache_open()
mm, slub: fix mismatch between reconstructed freelist depth and cnt
mm, slub: fix two bugs in slab_debug_trace_open()
mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
memblock: check memory total_size
ocfs2: mount fails with buffer overflow in strlen
ocfs2: fix data corruption after conversion from inline format
mm/migrate: fix CPUHP state to update node demotion order
mm/migrate: add CPU hotplug to demotion #ifdef
mm/migrate: optimize hotplug-time demotion order updates
userfaultfd: fix a race between writeprotect and exit_mmap()
mm/userfaultfd: selftests: fix memory corruption with thp enabled
Jeff Layton [Thu, 7 Oct 2021 18:19:49 +0000 (14:19 -0400)]
ceph: fix handling of "meta" errors
Currently, we check the wb_err too early for directories, before all of
the unsafe child requests have been waited on. In order to fix that we
need to check the mapping->wb_err later nearer to the end of ceph_fsync.
We also have an overly-complex method for tracking errors after
blocklisting. The errors recorded in cleanup_session_requests go to a
completely separate field in the inode, but we end up reporting them the
same way we would for any other error (in fsync).
There's no real benefit to tracking these errors in two different
places, since the only reporting mechanism for them is in fsync, and
we'd need to advance them both every time.
Given that, we can just remove i_meta_err, and convert the places that
used it to instead just use mapping->wb_err instead. That also fixes
the original problem by ensuring that we do a check_and_advance of the
wb_err at the end of the fsync op.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52864 Reported-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Jeff Layton [Thu, 30 Sep 2021 12:33:13 +0000 (08:33 -0400)]
ceph: skip existing superblocks that are blocklisted or shut down when mounting
Currently when mounting, we may end up finding an existing superblock
that corresponds to a blocklisted MDS client. This means that the new
mount ends up being unusable.
If we've found an existing superblock with a client that is already
blocklisted, and the client is not configured to recover on its own,
fail the match. Ditto if the superblock has been forcibly unmounted.
While we're in here, also rename "other" to the more conventional "fsc".
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path
When the a large chunk of data send and the receiver does not send a
Flow Control frame back in time, the sendmsg() does not return a error
code, but the number of bytes sent corresponding to the size of the
packet.
If a timeout occurs the isotp_tx_timer_handler() is fired, sets
sk->sk_err and calls the sk->sk_error_report() function. It was
wrongly expected that the error would be propagated to user space in
every case. For isotp_sendmsg() blocking on wait_event_interruptible()
this is not the case.
This patch fixes the problem by checking if sk->sk_err is set and
returning the error to user space.
Andrej Shadura [Mon, 18 Oct 2021 22:16:22 +0000 (15:16 -0700)]
mailmap: add Andrej Shadura
Add a mapping for my old work email for BelDisplayTech to the personal
email, and make sure the Collabora email has the correct spelling of the
first name.
Marek Szyprowski [Mon, 18 Oct 2021 22:16:19 +0000 (15:16 -0700)]
mm/thp: decrease nr_thps in file's mapping on THP split
Decrease nr_thps counter in file's mapping to ensure that the page cache
won't be dropped excessively on file write access if page has been
already split.
I've tried a test scenario running a big binary, kernel remaps it with
THPs, then force a THP split with /sys/kernel/debug/split_huge_pages.
During any further open of that binary with O_RDWR or O_WRITEONLY kernel
drops page cache for it, because of non-zero thps counter.
Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 09d91cda0e82 ("mm,thp: avoid writes to file with THP in pagecache") Fixes: 06d3eff62d9d ("mm/thp: fix node page state in split_huge_page_to_list()") Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: <sfoon.kim@samsung.com> Cc: Song Liu <songliubraving@fb.com> Cc: Rik van Riel <riel@surriel.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem()
Check for a NULL page->mapping before dereferencing the mapping in
page_is_secretmem(), as the page's mapping can be nullified while gup()
is running, e.g. by reclaim or truncation.
Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Sean Christopherson <seanjc@google.com> Reported-by: Darrick J. Wong <djwong@kernel.org> Reported-by: Stephen <stephenackerman16@gmail.com> Tested-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log