Shay Bar [Mon, 10 Feb 2020 13:07:28 +0000 (15:07 +0200)]
mac80211: fix wrong 160/80+80 MHz setting
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only.
This is wrong because STA may not support > 80MHz BW.
Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz.
The "support_80_80" and "support_160" setting is based on:
"Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW
Support subfield at a STA transmitting the VHT Capabilities Information field"
From "Draft P802.11REVmd_D3.0.pdf"
cfg80211: check wiphy driver existence for drvinfo report
When preparing ethtool drvinfo, check if wiphy driver is defined
before dereferencing it. Driver may not exist, e.g. if wiphy is
attached to a virtual platform device.
Johannes Berg [Fri, 31 Jan 2020 11:12:58 +0000 (13:12 +0200)]
mac80211: consider more elements in parsing CRC
We only use the parsing CRC for checking if a beacon changed,
and elements with an ID > 63 cannot be represented in the
filter. Thus, like we did before with WMM and Cisco vendor
elements, just statically add these forgotten items to the
CRC:
- WLAN_EID_VHT_OPERATION
- WLAN_EID_OPMODE_NOTIF
I guess that in most cases when VHT/HE operation change, the HT
operation also changed, and so the change was picked up, but we
did notice that pure operating mode notification changes were
ignored.
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi
[restrict to VHT for the mac80211 branch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sara Sharon [Fri, 31 Jan 2020 11:12:51 +0000 (13:12 +0200)]
mac80211: fix quiet mode activation in action frames
Previously I intended to ignore quiet mode in probe response, however
I ended up ignoring it instead for action frames. As a matter of fact,
this path isn't invoked for probe responses to start with. Just revert
this patch.
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: e815cd028e5f ("mac80211: ignore quiet mode in probe") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-15-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Wed, 15 Jan 2020 11:25:50 +0000 (12:25 +0100)]
mac80211: use more bits for ack_frame_id
It turns out that this wasn't a good idea, I hit a test failure in
hwsim due to this. That particular failure was easily worked around,
but it raised questions: if an AP needs to, for example, send action
frames to each connected station, the current limit is nowhere near
enough (especially if those stations are sleeping and the frames are
queued for a while.)
Shuffle around some bits to make more room for ack_frame_id to allow
up to 8192 queued up frames, that's enough for queueing 4 frames to
each connected station, even at the maximum of 2007 stations on a
single AP.
We take the bits from band (which currently only 2 but I leave 3 in
case we add another band) and from the hw_queue, which can only need
4 since it has a limit of 16 queues.
net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()
b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.
Fixes: 18dea0fd1963 ("net: dsa: b53: Properly account for VLAN filtering") Fixes: 89fb23a74505 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dejin Zheng [Thu, 6 Feb 2020 15:29:17 +0000 (23:29 +0800)]
net: stmmac: fix a possible endless loop
It forgot to reduce the value of the variable retry in a while loop
in the ethqos_configure() function. It may cause an endless loop and
without timeout.
Fixes: 169b56fcf09e ("net: stmmac: Add driver for Qualcomm ethqos") Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 6 Feb 2020 13:57:40 +0000 (13:57 +0000)]
rxrpc: Fix call RCU cleanup using non-bh-safe locks
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a
put call, calls rxrpc_put_connection() which, deep in its bowels, takes a
number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and
local->client_conns_lock. RCU callbacks, however, are normally called from
softirq context, which can cause lockdep to notice the locking
inconsistency.
To get lockdep to detect this, it's necessary to have the connection
cleaned up on the put at the end of the last of its calls, though normally
the clean up is deferred. This can be induced, however, by starting a call
on an AF_RXRPC socket and then closing the socket without reading the
reply.
Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a
workqueue if in softirq-mode and defer the destruction to process context.
Note that another way to fix this could be to add a bunch of bh-disable
annotations to the spinlocks concerned - and there might be more than just
those two - but that means spending more time with BHs disabled.
Note also that some of these places were covered by bh-disable spinlocks
belonging to the rxrpc_transport object, but these got removed without the
_bh annotation being retained on the next lock in.
Fixes: c3599cbbdff8 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hillf Danton <hdanton@sina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 6 Feb 2020 13:55:01 +0000 (13:55 +0000)]
rxrpc: Fix service call disconnection
The recent patch that substituted a flag on an rxrpc_call for the
connection pointer being NULL as an indication that a call was disconnected
puts the set_bit in the wrong place for service calls. This is only a
problem if a call is implicitly terminated by a new call coming in on the
same connection channel instead of a terminating ACK packet.
In such a case, rxrpc_input_implicit_end_call() calls
__rxrpc_disconnect_call(), which is now (incorrectly) setting the
disconnection bit, meaning that when rxrpc_release_call() is later called,
it doesn't call rxrpc_disconnect_call() and so the call isn't removed from
the peer's error distribution list and the list gets corrupted.
KASAN finds the issue as an access after release on a call, but the
position at which it occurs is confusing as it appears to be related to a
different call (the call site is where the latter call is being removed
from the error distribution list and either the next or pprev pointer
points to a previously released call).
Fix this by moving the setting of the flag from __rxrpc_disconnect_call()
to rxrpc_disconnect_call() in the same place that the connection pointer
was being cleared.
Fixes: d2fe3f4fdb25 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 9 Jan 2020 13:53:37 +0000 (15:53 +0200)]
net/mlx5e: TX, Error completion is for last WQE in batch
For a cyclic work queue, when not requesting a completion per WQE,
a single CQE might indicate the completion of several WQEs.
However, in case some WQE in the batch causes an error, then an error
completion is issued, breaking the batch, and pointing to the offending
WQE in the wqe_counter field.
Hence, WQE-specific error CQE handling (like printing, breaking, etc...)
should be performed only for the last WQE in batch.
Fixes: 4e23b5774fd3 ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events") Fixes: dac7cd4f84ae ("net/mlx5e: RX, Support multiple outstanding UMR posts") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Raed Salem [Wed, 23 Oct 2019 13:41:21 +0000 (16:41 +0300)]
net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx,
however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function
nullifies sa_ctx pointer without freeing the memory allocated,
hence the memory leak.
Fix by free SA context when the SA is released.
Fixes: fc4f3d9a9628 ("net/mlx5: Refactor accel IPSec code") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Raed Salem [Tue, 24 Dec 2019 07:54:45 +0000 (09:54 +0200)]
net/mlx5: IPsec, Fix esp modify function attribute
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used
with negative negation as zero value indicates success but it
used as failure return value instead.
Fix by remove the unary not negation operator.
Fixes: 7de2a27647f7 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net: systemport: Avoid RBUF stuck in Wake-on-LAN mode
After a number of suspend and resume cycles, it is possible for the RBUF
to be stuck in Wake-on-LAN mode, despite the MPD enable bit being
cleared which instructed the RBUF to exit that mode.
Avoid creating that problematic condition by clearing the RX_EN and
TX_EN bits in the UniMAC prior to disable the Magic Packet Detector
logic which is guaranteed to make the RBUF exit Wake-on-LAN mode.
Fixes: 5e5575881431 ("net: systemport: add Wake-on-LAN support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 5 Feb 2020 20:22:46 +0000 (21:22 +0100)]
r8169: fix performance regression related to PCIe max read request size
It turned out that on low performance systems the original change can
cause lower tx performance. On a N3450-based mini-PC tx performance
in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively
revert the original change, just use pcie_set_readrq() now instead of
changing the PCIe capability register directly.
Fixes: d4bb8c4bef7a ("r8169: remove fiddling with the PCIe max read request size") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 5 Feb 2020 11:53:30 +0000 (14:53 +0300)]
net: sched: prevent a use after free
The bug is that we call kfree_skb(skb) and then pass "skb" to
qdisc_pkt_len(skb) on the next line, which is a use after free.
Also Cong Wang points out that it's better to delay the actual
frees until we drop the rtnl lock so we should use rtnl_kfree_skbs()
instead of kfree_skb().
Cc: Cong Wang <xiyou.wangcong@gmail.com> Fixes: 614b84da5c15 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Tue, 4 Feb 2020 18:40:29 +0000 (13:40 -0500)]
skbuff: fix a data race in skb_queue_len()
sk_buff.qlen can be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg
read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96:
unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821
net/unix/af_unix.c:1761
____sys_sendmsg+0x33e/0x370
___sys_sendmsg+0xa6/0xf0
__sys_sendmsg+0x69/0xf0
__x64_sys_sendmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99:
__skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029
__skb_try_recv_datagram+0xbe/0x220
unix_dgram_recvmsg+0xee/0x850
____sys_recvmsg+0x1fb/0x210
___sys_recvmsg+0xa2/0xf0
__sys_recvmsg+0x66/0xf0
__x64_sys_recvmsg+0x51/0x70
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Since only the read is operating as lockless, it could introduce a logic
bug in unix_recvq_full() due to the load tearing. Fix it by adding
a lockless variant of skb_queue_len() and unix_recvq_full() where
READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to
the commit bed44d2faf14 ("net: add skb_queue_empty_lockless()").
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net>
net: mvneta: move rx_dropped and rx_errors in per-cpu stats
Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics
Fixes: f34927d80b1a ("net: mvneta: Improve the buffer allocation method for SWBM") Fixes: 3428e253d466 ("net: mvneta: bm: add support for hardware buffer management") Fixes: a2099e3eb275 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Turns out that when we accept a new subflow, the newly created
inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the
listener socket.
This wasn't caught by the selftest because it closes the accepted fd
before the listening one.
adding a close(listenfd) after accept returns is enough:
BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790
Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518
Call Trace:
inet6_getname+0x6ba/0x790
__sys_getpeername+0x10b/0x250
__x64_sys_getpeername+0x6f/0xb0
also alter test program to exercise this.
Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
qed: Fix timestamping issue for L2 unicast ptp packets.
commit 70528500e482 ("qed: Add support for Timestamping the unicast
PTP packets.") handles the timestamping of L4 ptp packets only.
This patch adds driver changes to detect/timestamp both L2/L4 unicast
PTP packets.
Fixes: 70528500e482 ("qed: Add support for Timestamping the unicast PTP packets.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Feb 2020 13:46:04 +0000 (14:46 +0100)]
Merge branch 'macb-TSO-bug-fixes'
Harini Katakam says:
====================
macb: TSO bug fixes
An IP errata was recently discovered when testing TSO enabled versions
with perf test tools where a false amba error is reported by the IP.
Some ways to reproduce would be to use iperf or applications with payload
descriptor sizes very close to 16K. Once the error is observed TXERR (or
bit 6 of ISR) will be constantly triggered leading to a series of tx path
error handling and clean up. Workaround the same by limiting this size to
0x3FC0 as recommended by Cadence. There was no performance impact on 1G
system that I tested with.
Note on patch 1: The alignment code may be unused but leaving it there
in case anyone is using UFO.
Added Fixes tag to patch 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Harini Katakam [Wed, 5 Feb 2020 12:38:12 +0000 (18:08 +0530)]
net: macb: Limit maximum GEM TX length in TSO
GEM_MAX_TX_LEN currently resolves to 0x3FF8 for any IP version supporting
TSO with full 14bits of length field in payload descriptor. But an IP
errata causes false amba_error (bit 6 of ISR) when length in payload
descriptors is specified above 16387. The error occurs because the DMA
falsely concludes that there is not enough space in SRAM for incoming
payload. These errors were observed continuously under stress of large
packets using iperf on a version where SRAM was 16K for each queue. This
errata will be documented shortly and affects all versions since TSO
functionality was added. Hence limit the max length to 0x3FC0 (rounded).
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Harini Katakam [Wed, 5 Feb 2020 12:38:11 +0000 (18:08 +0530)]
net: macb: Remove unnecessary alignment check for TSO
The IP TSO implementation does NOT require the length to be a
multiple of 8. That is only a requirement for UFO as per IP
documentation. Hence, exit macb_features_check function in the
beginning if the protocol is not UDP. Only when it is UDP,
proceed further to the alignment checks. Update comments to
reflect the same. Also remove dead code checking for protocol
TCP when calculating header length.
Fixes: b752f2c3d2f8 ("cadence: Add LSO support.") Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 5 Feb 2020 03:26:05 +0000 (19:26 -0800)]
bonding/alb: properly access headers in bond_alb_xmit()
syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.
First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF
This patch removes ipx_hdr() since it was only (mis)used from bonding.
Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.
BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
(if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Tue, 4 Feb 2020 23:59:50 +0000 (15:59 -0800)]
devlink: report 0 after hitting end in region read
commit e0fb84163c09 ("devlink: Return right error code in case of errors
for region read") modified the region read code to report errors
properly in unexpected cases.
In the case where the start_offset and ret_offset match, it unilaterally
converted this into an error. This causes an issue for the "dump"
version of the command. In this case, the devlink region dump will
always report an invalid argument:
This occurs because the expected flow for the dump is to return 0 after
there is no further data.
The simplest fix would be to stop converting the error code to -EINVAL
if start_offset == ret_offset. However, avoid unnecessary work by
checking for when start_offset is larger than the region size and
returning 0 upfront.
Fixes: e0fb84163c09 ("devlink: Return right error code in case of errors for region read") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: selftests: tie socket waiting to target pid
Without this, we wind up proceeding too early sometimes when the
previous process has just used the same listening port. So, we tie the
listening socket query to the specific pid we're interested in.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_ENABLE_WARN_DEPRECATED is gone since commit d5683290b2c7
("deprecate the '__deprecated' attribute warnings entirely and for
good").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: selftests: ensure non-addition of peers with failed precomputation
Ensure that peers with low order points are ignored, both in the case
where we already have a device private key and in the case where we do
not. This adds points that naturally give a zero output.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wireguard: noise: reject peers with low order public keys
Our static-static calculation returns a failure if the public key is of
low order. We check for this when peers are added, and don't allow them
to be added if they're low order, except in the case where we haven't
yet been given a private key. In that case, we would defer the removal
of the peer until we're given a private key, since at that point we're
doing new static-static calculations which incur failures we can act on.
This meant, however, that we wound up removing peers rather late in the
configuration flow.
Syzkaller points out that peer_remove calls flush_workqueue, which in
turn might then wait for sending a handshake initiation to complete.
Since handshake initiation needs the static identity lock, holding the
static identity lock while calling peer_remove can result in a rare
deadlock. We have precisely this case in this situation of late-stage
peer removal based on an invalid public key. We can't drop the lock when
removing, because then incoming handshakes might interact with a bogus
static-static calculation.
While the band-aid patch for this would involve breaking up the peer
removal into two steps like wg_peer_remove_all does, in order to solve
the locking issue, there's actually a much more elegant way of fixing
this:
If the static-static calculation succeeds with one private key, it
*must* succeed with all others, because all 32-byte strings map to valid
private keys, thanks to clamping. That means we can get rid of this
silly dance and locking headaches of removing peers late in the
configuration flow, and instead just reject them early on, regardless of
whether the device has yet been assigned a private key. For the case
where the device doesn't yet have a private key, we safely use zeros
just for the purposes of checking for low order points by way of
checking the output of the calculation.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 4 Feb 2020 21:17:25 +0000 (22:17 +0100)]
wireguard: allowedips: fix use-after-free in root_remove_peer_lists
In the unlikely case a new node could not be allocated, we need to
remove @newnode from @peer->allowedips_list before freeing it.
syzbot reported:
BUG: KASAN: use-after-free in __list_del_entry_valid+0xdc/0xf5 lib/list_debug.c:54
Read of size 8 at addr ffff88809881a538 by task syz-executor.4/30133
Memory state around the buggy address: ffff88809881a400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809881a480: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88809881a500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^ ffff88809881a580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88809881a600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
Fixes: 0c73bbc77a76 ("net: WireGuard secure network tunnel") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: wireguard@lists.zx2c4.com Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Tue, 4 Feb 2020 19:10:12 +0000 (11:10 -0800)]
net_sched: fix a resource leak in tcindex_set_parms()
Jakub noticed there is a potential resource leak in
tcindex_set_parms(): when tcindex_filter_result_init() fails
and it jumps to 'errout1' which doesn't release the memory
and resources allocated by tcindex_alloc_perfect_hash().
We should just jump to 'errout_alloc' which calls
tcindex_free_perfect_hash().
Fixes: 224fdce15787 ("net_sched: properly handle failure case of tcf_exts_init()") Reported-by: Jakub Kicinski <kuba@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When an mptcp socket connects to a tcp peer or when a middlebox interferes
with tcp options, mptcp needs to fall back to plain tcp.
Problem is that mptcp is trying to be too clever in this case:
It attempts to close the mptcp meta sk and transparently replace it with
the (only) subflow tcp sk.
Unfortunately, this is racy -- the socket is already exposed to userspace.
Any parallel calls to send/recv/setsockopt etc. can cause use-after-free:
While the use-after-free can be resolved, there is another problem:
sock->ops and sock->sk assignments are not atomic, i.e. we may get calls
into mptcp functions with sock->sk already pointing at the subflow socket,
or calls into tcp functions with a mptcp meta sk.
Remove the fallback code and call the relevant functions for the (only)
subflow in case the mptcp socket is connected to tcp peer.
Reported-by: Christoph Paasch <cpaasch@apple.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Wed, 5 Feb 2020 09:29:03 +0000 (11:29 +0200)]
net: dsa: microchip: Platform data shan't include kernel.h
Replace with appropriate types.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko [Wed, 5 Feb 2020 09:29:02 +0000 (11:29 +0200)]
net: dsa: b53: Platform data shan't include kernel.h
Replace with appropriate types.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: abdac68b7a13 ("netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs") CC: Taehee Yoo <ap420073@gmail.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 593eec2361d6 ("mfd: ioc3: Add driver for SGI IOC3 chip") moved
request_irq() from ioc3_open into probe function, but forgot to remove
free_irq() from ioc3_close.
Fixes: 593eec2361d6 ("mfd: ioc3: Add driver for SGI IOC3 chip") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
1) Use after free in rxrpc_put_local(), from David Howells.
2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.
3) Make sure we clear various bits of TCP state in response to
tcp_disconnect(). From Eric Dumazet.
4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.
5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.
6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.
7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
snapshot panics, stack out of bounds, etc.)
8) cls_tcindex changes hash table size after allocating the table, fix
from Cong Wang.
9) Fix regression in the enforcement of session ID uniqueness in l2tp.
We only have to enforce uniqueness for IP based tunnels not UDP
ones. From Ridge Kennedy.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
gtp: use __GFP_NOWARN to avoid memalloc warning
l2tp: Allow duplicate session creation with UDP
r8152: Add MAC passthrough support to new device
net_sched: fix an OOB access in cls_tcindex
qed: Remove set but not used variable 'p_link'
tc-testing: add missing 'nsPlugin' to basic.json
tc-testing: fix eBPF tests failure on linux fresh clones
net: hsr: fix possible NULL deref in hsr_handle_frame()
netdevsim: remove unused sdev code
netdevsim: use __GFP_NOWARN to avoid memalloc warning
netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
netdevsim: fix panic in nsim_dev_take_snapshot_write()
netdevsim: disable devlink reload when resources are being used
netdevsim: fix using uninitialized resources
bnxt_en: Fix TC queue mapping.
bnxt_en: Fix logic that disables Bus Master during firmware reset.
bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
net: stmmac: Delete txtimer in suspend()
...
Linus Torvalds [Tue, 4 Feb 2020 13:06:46 +0000 (13:06 +0000)]
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
Linus Torvalds [Tue, 4 Feb 2020 11:58:07 +0000 (11:58 +0000)]
Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze update from Michal Simek:
- enable CMA
- add support for MB v11
- defconfig updates
- minor fixes
* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add ID for Microblaze v11
microblaze: Prevent the overflow of the start
microblaze: Wire CMA allocator
asm-generic: Make dma-contiguous.h a mandatory include/asm header
microblaze: Sync defconfig with latest Kconfig layout
microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
microblaze: Align comments with register usage
Linus Torvalds [Tue, 4 Feb 2020 11:45:21 +0000 (11:45 +0000)]
Merge tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Try to preserve holes in sparse files when copying up, thus saving
disk space and improving performance.
- Fix a performance regression introduced in v4.19 by preserving
asynchronicity of IO when fowarding to underlying layers. Add VFS
helpers to submit async iocbs.
- Fix a regression in lseek(2) introduced in v4.19 that breaks >2G
seeks on 32bit kernels.
- Fix a corner case where st_ino/st_dev was not preserved across copy
up.
- Miscellaneous fixes and cleanups.
* tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix lseek overflow on 32bit
ovl: add splice file read write helper
ovl: implement async IO routines
vfs: add vfs_iocb_iter_[read|write] helper functions
ovl: layer is const
ovl: fix corner case of non-constant st_dev;st_ino
ovl: fix corner case of conflicting lower layer uuid
ovl: generalize the lower_fs[] array
ovl: simplify ovl_same_sb() helper
ovl: generalize the lower_layers[] array
ovl: improving copy-up efficiency for big sparse file
ovl: use ovl_inode_lock in ovl_llseek()
ovl: use pr_fmt auto generate prefix
ovl: fix wrong WARN_ON() in ovl_cache_update_ino()
Taehee Yoo [Tue, 4 Feb 2020 03:24:59 +0000 (03:24 +0000)]
gtp: use __GFP_NOWARN to avoid memalloc warning
gtp hashtable size is received by user-space.
So, this hashtable size could be too large. If so, kmalloc will internally
print a warning message.
This warning message is actually not necessary for the gtp module.
So, this patch adds __GFP_NOWARN to avoid this message.
Fixes: 1b1001cc4e44 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ridge Kennedy [Mon, 3 Feb 2020 23:24:00 +0000 (12:24 +1300)]
l2tp: Allow duplicate session creation with UDP
In the past it was possible to create multiple L2TPv3 sessions with the
same session id as long as the sessions belonged to different tunnels.
The resulting sessions had issues when used with IP encapsulated tunnels,
but worked fine with UDP encapsulated ones. Some applications began to
rely on this behaviour to avoid having to negotiate unique session ids.
Some time ago a change was made to require session ids to be unique across
all tunnels, breaking the applications making use of this "feature".
This change relaxes the duplicate session id check to allow duplicates
if both of the colliding sessions belong to UDP encapsulated tunnels.
Fixes: 3fff2c9fd38b ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Mon, 3 Feb 2020 05:14:35 +0000 (21:14 -0800)]
net_sched: fix an OOB access in cls_tcindex
As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash
to compute the size of memory allocation, but cp->hash is
set again after the allocation, this caused an out-of-bound
access.
So we have to move all cp->hash initialization and computation
before the memory allocation. Move cp->mask and cp->shift together
as cp->hash may need them for computation too.
Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com Fixes: a4b67f07dc6f ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Simek [Tue, 14 Jan 2020 09:05:24 +0000 (10:05 +0100)]
microblaze: Wire CMA allocator
Based on commit dad9d046f8a3 ("microblaze: use the generic dma coherent
remap allocator")
CMA can be easily enabled by calling dma_contiguous_reserve() at the end of
mmu_init(). High limit is end of lowmem space which is completely unused at
this point of time.
Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
As EXT4 filesystem driver is used for handling EXT2 file systems as
well. There is no need to enable EXT2 driver. This patch disables EXT2
and enables EXT3/EXT4 drivers.
Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Linus Torvalds [Tue, 4 Feb 2020 09:06:24 +0000 (09:06 +0000)]
Merge tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the Mediatek MT8183 SCP, modem remoteproc on
Qualcomm SC7180 platform, audio and sensor remoteprocs on Qualcomm
MSM8998 and audio, compute, modem and sensor remoteprocs on Qualcomm
SM8150.
It adds votes for necessary power-domains for all Qualcomm TrustZone
based remoteproc instances are held, fixes a bug related to remoteproc
drivers registering before the core has been initialized and does
clean up the Qualcomm modem remoteproc driver"
* tag 'rproc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (21 commits)
remoteproc: qcom: q6v5-mss: Improve readability of reset_assert
remoteproc: qcom: q6v5-mss: Use regmap_read_poll_timeout
remoteproc: qcom: q6v5-mss: Rename boot status timeout
remoteproc: qcom: q6v5-mss: Improve readability across clk handling
remoteproc: use struct_size() helper
remoteproc: Initialize rproc_class before use
rpmsg: add rpmsg support for mt8183 SCP.
remoteproc/mediatek: add SCP support for mt8183
dt-bindings: Add a binding for Mediatek SCP
remoteproc: mss: q6v5-mss: Add modem support on SC7180
dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for SC7180
remoteproc: qcom: pas: Add MSM8998 ADSP and SLPI support
dt-bindings: remoteproc: qcom: Add ADSP and SLPI support for MSM8998 SoC
remoteproc: q6v5-mss: Remove mem clk from the active pool
remoteproc: qcom: Remove unneeded semicolon
remoteproc: qcom: pas: Add auto_boot flag
remoteproc: qcom: pas: Add SM8150 ADSP, CDSP, Modem and SLPI support
dt-bindings: remoteproc: qcom: SM8150 Add ADSP, CDSP, MPSS and SLPI support
remoteproc: qcom: pas: Vote for active/proxy power domains
dt-bindings: remoteproc: qcom: Add power-domain bindings for Q6V5 PAS
...
Linus Torvalds [Tue, 4 Feb 2020 09:04:37 +0000 (09:04 +0000)]
Merge tag 'hwlock-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This continues the transition of drivers to device managed resources
and removal of unnecessary PM runtime integration, with cleanups to
the SIRF, OMAP and Qualcomm hwspinlock drivers.
It also adds Baolin as reviewer in MAINTAINERS"
* tag 'hwlock-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
hwspinlock: sirf: Use devm_hwspin_lock_register() to register hwlock controller
hwspinlock: sirf: Remove redundant PM runtime functions
hwspinlock: sirf: Change to use devm_platform_ioremap_resource()
hwspinlock: omap: Use devm_kzalloc() to allocate memory
hwspinlock: omap: Change to use devm_platform_ioremap_resource()
hwspinlock: qcom: Use devm_hwspin_lock_register() to register hwlock controller
hwspinlock: qcom: Remove redundant PM runtime functions
hwspinlock: stm32: convert to devm_platform_ioremap_resource
MAINTAINERS: Add myself as reviewer for the hwspinlock subsystem
YueHaibing [Tue, 4 Feb 2020 02:24:41 +0000 (02:24 +0000)]
qed: Remove set but not used variable 'p_link'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qlogic/qed/qed_cxt.c: In function 'qed_qm_init_pf':
drivers/net/ethernet/qlogic/qed/qed_cxt.c:1401:29: warning:
variable 'p_link' set but not used [-Wunused-but-set-variable]
====================
unbreak 'basic' and 'bpf' tdc testcases
- patch 1/2 fixes tdc failures with 'bpf' action on fresch clones of the
kernel tree
- patch 2/2 allow running tdc for the 'basic' classifier without tweaking
tdc_config.py
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Mon, 3 Feb 2020 15:29:30 +0000 (16:29 +0100)]
tc-testing: add missing 'nsPlugin' to basic.json
since tdc tests for cls_basic need $DEV1, use 'nsPlugin' so that the
following command can be run without errors:
[root@f31 tc-testing]# ./tdc.py -c basic
Fixes: af8a942b11cb ("tc-testing: Introduced tdc tests for basic filter") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Mon, 3 Feb 2020 15:29:29 +0000 (16:29 +0100)]
tc-testing: fix eBPF tests failure on linux fresh clones
when the following command is done on a fresh clone of the kernel tree,
[root@f31 tc-testing]# ./tdc.py -c bpf
test cases that need to build the eBPF sample program fail systematically,
because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the
'khdr' target fails). Pass the correct environment to 'make', in place of
ENVIR, to allow running these tests.
Fixes: 85cc7a845e54 ("tc-testing: use a plugin to build eBPF program") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: e7dfc280f695 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 4 Feb 2020 07:24:48 +0000 (07:24 +0000)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"The rest of MM and the rest of everything else: hotfixes, ipc, misc,
procfs, lib, cleanups, arm"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (67 commits)
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
treewide: remove redundant IS_ERR() before error code check
include/linux/cpumask.h: don't calculate length of the input string
lib: new testcases for bitmap_parse{_user}
lib: rework bitmap_parse()
lib: make bitmap_parse_user a wrapper on bitmap_parse
lib: add test for bitmap_parse()
bitops: more BITS_TO_* macros
lib/string: add strnchrnul()
proc: convert everything to "struct proc_ops"
proc: decouple proc from VFS with "struct proc_ops"
asm-generic/tlb: provide MMU_GATHER_TABLE_FREE
asm-generic/tlb: rename HAVE_MMU_GATHER_NO_GATHER
asm-generic/tlb: rename HAVE_MMU_GATHER_PAGE_SIZE
asm-generic/tlb: rename HAVE_RCU_TABLE_FREE
asm-generic/tlb: add missing CONFIG symbol
asm-gemeric/tlb: remove stray function declarations
asm-generic/tlb: avoid potential double flush
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
...
Linus Torvalds [Tue, 4 Feb 2020 07:21:04 +0000 (07:21 +0000)]
Merge tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm
Pull drm ttm/mm updates from Dave Airlie:
"Thomas Hellstrom has some more changes to the TTM layer that needed a
patch to the mm subsystem.
This adds a new mm API vmf_insert_mixed_prot to avoid an ugly hack
that has limitations in the TTM layer"
* tag 'drm-next-2020-02-04' of git://anongit.freedesktop.org/drm/drm:
mm, drm/ttm: Fix vm page protection handling
mm: Add a vmf_insert_mixed_prot() function
Linus Torvalds [Tue, 4 Feb 2020 07:17:41 +0000 (07:17 +0000)]
Merge tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"CrOS EC:
- Refactoring of some of cros_ec's headers:
include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to
drivers/platform/chrome which contains shared operations of cros_ec
transport drivers.
- Response tracing in cros_ec_proto
Wilco EC:
- Fix unregistration order.
- Fix keyboard backlight probing on systems without keyboard
backlight
- Minor cleanup (newlines in printks, COMPILE_TEST)
Misc:
- chromeos_laptop converted to use i2c_new_scanned_device instead of
i2c_new_probed_device"
* tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec: Match implementation with headers
platform/chrome: cros_ec: Drop unaligned.h include
platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST
platform/chrome: wilco_ec: Add newlines to printks
platform/chrome: wilco_ec: Fix unregistration order
cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
platform/chrome: cros_ec_ishtp: Make init_lock static
platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device
platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs
platform/chrome: cros_ec_proto: Add response tracing
platform/chrome: cros_ec_trace: Match trace commands with EC commands
Linus Torvalds [Tue, 4 Feb 2020 07:03:40 +0000 (07:03 +0000)]
Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The VL_READ and VL_CLR ioctls have been reworked to be more useful.
This will not break userspace as there are very few users and they are
using the integer value as a boolean.
Apart from that, two drivers were reworked and a few fixes here and
there for a net reduction of number of lines.
Summary:
Subsystem:
- the VL_READ and VL_CLR ioctls are now documented and their behavior
is unified across all the drivers.
- RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
REGMAP_I2C and REGMAP_SPI unecessarily.
Drivers:
- at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
sama5d2 compatibles.
- cmos: solve lost interrupts issue on MS Surface 3
- hym8563: return proper errno when time is invalid
- rv3029: many fixes, nvram support"
* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
dt-bindings: rtc: at91rm9200: document clocks property
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
rtc: Kconfig: select REGMAP_I2C when necessary
rtc: Kconfig: properly indent sd3078 entry
rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
rtc: cmos: Use predefined value for RTC IRQ on legacy x86
rtc: cmos: Stop using shared IRQ
rtc: tps6586x: Use IRQ_NOAUTOEN flag
rtc: at91rm9200: use FIELD_PREP/FIELD_GET
rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
rtc: at91rm9200: move register definitions to C file
rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
dt-bindings: rtc: at91rm9200: convert bindings to json-schema
rtc: at91rm9200: remove procfs information
dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
rtc: pcf8563: Use BIT
rtc: moxart: Convert to SPDX identifier
rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
rtc: rx8025: Remove struct i2c_client from struct rx8025_data
rtc: hym8563: Read the valid flag directly instead of caching it
...
Chen-Yu Tsai [Tue, 4 Feb 2020 01:37:48 +0000 (17:37 -0800)]
ARM: dma-api: fix max_pfn off-by-one error in __dma_supported()
max_pfn, as set in arch/arm/mm/init.c:
static void __init find_limits(unsigned long *min,
unsigned long *max_low,
unsigned long *max_high)
{
*max_low = PFN_DOWN(memblock_get_current_limit());
*min = PFN_UP(memblock_start_of_DRAM());
*max_high = PFN_DOWN(memblock_end_of_DRAM());
}
with memblock_end_of_DRAM() pointing to the next byte after DRAM. As
such, max_pfn points to the PFN after the end of DRAM.
Thus when using max_pfn to check DMA masks, we should subtract one when
checking DMA ranges against it.
Commit 19dc4450453a ("ARM: dma-api: fix off-by-one error in
__dma_supported()") fixed the same issue, but missed this spot.
This issue was found while working on the sun4i-csi v4l2 driver on the
Allwinner R40 SoC. On Allwinner SoCs, DRAM is offset at 0x40000000, and
we are starting to use of_dma_configure() with the "dma-ranges" property
in the device tree to have the DMA API handle the offset.
In this particular instance, dma-ranges was set to the same range as the
actual available (2 GiB) DRAM. The following error appeared when the
driver attempted to allocate a buffer:
sun4i-csi 1c09000.csi: Coherent DMA mask 0x7fffffff (pfn 0x40000-0xc0000)
covers a smaller range of system memory than the DMA zone pfn 0x0-0xc0001
sun4i-csi 1c09000.csi: dma_alloc_coherent of size 307200 failed
Fixing the off-by-one error makes things work.
Link: http://lkml.kernel.org/r/20191224030239.5656-1-wens@kernel.org Fixes: b5bd931ef9fb ("ARM: dma-mapping: check DMA mask against available memory") Fixes: 80872e30b072 ("ARM: another fix for the DMA mapping checks") Fixes: 42e9f5c3c10f ("ARM: dma-mapping: allow larger DMA mask than supported") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@armlinux.org.uk> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Tue, 4 Feb 2020 01:37:34 +0000 (17:37 -0800)]
lib: rework bitmap_parse()
bitmap_parse() is ineffective and full of opaque variables and opencoded
parts. It leads to hard understanding and usage of it. This rework
includes:
- remove bitmap_shift_left() call from the cycle. Now it makes the
complexity of the algorithm as O(nbits^2). In the suggested approach
the input string is parsed in reverse direction, so no shifts needed;
- relax requirement on a single comma and no white spaces between
chunks. It is considered useful in scripting, and it aligns with
bitmap_parselist();
- split bitmap_parse() to small readable helpers;
- make an explicit calculation of the end of input line at the
beginning, so users of the bitmap_parse() won't bother doing this.
Link: http://lkml.kernel.org/r/20200102043031.30357-6-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Cc: Amritha Nambiar <amritha.nambiar@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: "Tobin C . Harding" <tobin@kernel.org> Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Tue, 4 Feb 2020 01:37:31 +0000 (17:37 -0800)]
lib: make bitmap_parse_user a wrapper on bitmap_parse
Currently we parse user data byte after byte which leads to
overcomplicating of parsing algorithm. There are no performance critical
users of bitmap_parse_user(), and so we can duplicate user data to kernel
buffer and simply call bitmap_parselist(). This rework lets us unify and
simplify bitmap_parse() and bitmap_parse_user(), which is done in the
following patch.
Link: http://lkml.kernel.org/r/20200102043031.30357-5-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Amritha Nambiar <amritha.nambiar@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: "Tobin C . Harding" <tobin@kernel.org> Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Tue, 4 Feb 2020 01:37:24 +0000 (17:37 -0800)]
bitops: more BITS_TO_* macros
Introduce BITS_TO_U64, BITS_TO_U32 and BITS_TO_BYTES as they are handy in
the following patches (BITS_TO_U32 specifically). Reimplement tools/
version of the macros according to the kernel implementation.
Also fix indentation for BITS_PER_TYPE definition.
Link: http://lkml.kernel.org/r/20200102043031.30357-3-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Amritha Nambiar <amritha.nambiar@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: "Tobin C . Harding" <tobin@kernel.org> Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Tue, 4 Feb 2020 01:37:20 +0000 (17:37 -0800)]
lib/string: add strnchrnul()
Patch series "lib: rework bitmap_parse", v5.
Similarl to the recently revisited bitmap_parselist(), bitmap_parse() is
ineffective and overcomplicated. This series reworks it, aligns its
interface with bitmap_parselist() and makes it simpler to use.
The series also adds a test for the function and fixes usage of it in
cpumask_parse() according to the new design - drops the calculating of
length of an input string.
bitmap_parse() takes the array of numbers to be put into the map in the BE
order which is reversed to the natural LE order for bitmaps. For example,
to construct bitmap containing a bit on the position 42, we have to put a
line '400,0'. Current implementation reads chunk one by one from the
beginning ('400' before '0') and makes bitmap shift after each successful
parse. It makes the complexity of the whole process as O(n^2). We can do
it in reverse direction ('0' before '400') and avoid shifting, but it
requires reverse parsing helpers.
This patch (of 7):
New function works like strchrnul() with a length limited string.
Link: http://lkml.kernel.org/r/20200102043031.30357-2-yury.norov@gmail.com Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Amritha Nambiar <amritha.nambiar@intel.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: "Tobin C . Harding" <tobin@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Tue, 4 Feb 2020 01:37:14 +0000 (17:37 -0800)]
proc: decouple proc from VFS with "struct proc_ops"
Currently core /proc code uses "struct file_operations" for custom hooks,
however, VFS doesn't directly call them. Every time VFS expands
file_operations hook set, /proc code bloats for no reason.
Introduce "struct proc_ops" which contains only those hooks which /proc
allows to call into (open, release, read, write, ioctl, mmap, poll). It
doesn't contain module pointer as well.
- use tlb_remove_page(), when all page directores are full pages and
there are no futher contraints placed by things like software
walkers (HAVE_FAST_GUP).
- use MMU_GATHER_RCU_TABLE_FREE and tlb_remove_table() when the
architecture does not do IPI based TLB invalidate and has
HAVE_FAST_GUP (or software TLB fill).
This however leaves architectures that don't have page based directories
but don't need RCU in a bind. For those, provide MMU_GATHER_TABLE_FREE,
which provides the independent batching for directories without the
additional RCU freeing.
Link: http://lkml.kernel.org/r/20200116064531.483522-10-aneesh.kumar@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
does two TLBIs when tlb->fullmm, because __tlb_reset_range() will not
clear tlb->end in that case.
Observe that any caller to __tlb_adjust_range() also sets at least one of
the tlb->freed_tables || tlb->cleared_p* bits, and those are
unconditionally cleared by __tlb_reset_range().
Change the condition for actually issuing TLBI to having one of those bits
set, as opposed to having tlb->end != 0.
Link: http://lkml.kernel.org/r/20200116064531.483522-4-aneesh.kumar@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Tue, 4 Feb 2020 01:36:49 +0000 (17:36 -0800)]
mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush
Architectures for which we have hardware walkers of Linux page table
should flush TLB on mmu gather batch allocation failures and batch flush.
Some architectures like POWER supports multiple translation modes (hash
and radix) and in the case of POWER only radix translation mode needs the
above TLBI. This is because for hash translation mode kernel wants to
avoid this extra flush since there are no hardware walkers of linux page
table. With radix translation, the hardware also walks linux page table
and with that, kernel needs to make sure to TLB invalidate page walk cache
before page table pages are freed.
More details in commit 08c6ada82ec8 ("mm/tlb, x86/mm: Support invalidating
TLB caches for RCU_TABLE_FREE")
The changes to sparc are to make sure we keep the old behavior since we
are now removing HAVE_RCU_TABLE_NO_INVALIDATE. The default value for
tlb_needs_table_invalidate is to always force an invalidate and sparc can
avoid the table invalidate. Hence we define tlb_needs_table_invalidate to
false for sparc architecture.
powerpc/mmu_gather: enable RCU_TABLE_FREE even for !SMP case
Patch series "Fixup page directory freeing", v4.
This is a repost of patch series from Peter with the arch specific changes
except ppc64 dropped. ppc64 changes are added here because we are redoing
the patch series on top of ppc64 changes. This makes it easy to backport
these changes. Only the first 2 patches need to be backported to stable.
The thing is, on anything SMP, freeing page directories should observe the
exact same order as normal page freeing:
Without this, any concurrent page-table walk could end up with a
Use-after-Free. This is esp. trivial for anything that has software
page-table walkers (HAVE_FAST_GUP / software TLB fill) or the hardware
caches partial page-walks (ie. caches page directories).
Even on UP this might give issues since mmu_gather is preemptible these
days. An interrupt or preempted task accessing user pages might stumble
into the free page if the hardware caches page directories.
This patch series fixes ppc64 and add generic MMU_GATHER changes to
support the conversion of other architectures. I haven't added patches
w.r.t other architecture because they are yet to be acked.
This patch (of 9):
A followup patch is going to make sure we correctly invalidate page walk
cache before we free page table pages. In order to keep things simple
enable RCU_TABLE_FREE even for !SMP so that we don't have to fixup the
!SMP case differently in the followup patch
!SMP case is right now broken for radix translation w.r.t page walk
cache flush. We can get interrupted in between page table free and
that would imply we have page walk cache entries pointing to tables
which got freed already. Michael said "both our platforms that run on
Power9 force SMP on in Kconfig, so the !SMP case is unlikely to be a
problem for anyone in practice, unless they've hacked their kernel to
build it !SMP."
Link: http://lkml.kernel.org/r/20200116064531.483522-2-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:36:42 +0000 (17:36 -0800)]
x86: mm: avoid allocating struct mm_struct on the stack
struct mm_struct is quite large (~1664 bytes) and so allocating on the
stack may cause problems as the kernel stack size is small.
Since ptdump_walk_pgd_level_core() was only allocating the structure so
that it could modify the pgd argument we can instead introduce a pgd
override in struct mm_walk and pass this down the call stack to where it
is needed.
Since the correct mm_struct is now being passed down, it is now also
unnecessary to take the mmap_sem semaphore because ptdump_walk_pgd() will
now take the semaphore on the real mm.
[steven.price@arm.com: restore missed arm64 changes] Link: http://lkml.kernel.org/r/20200108145710.34314-1-steven.price@arm.com Link: http://lkml.kernel.org/r/20200108145710.34314-1-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:36:38 +0000 (17:36 -0800)]
mm: ptdump: reduce level numbers by 1 in note_page()
Rather than having to increment the 'depth' number by 1 in ptdump_hole(),
let's change the meaning of 'level' in note_page() since that makes the
code simplier.
Note that for x86, the level numbers were previously increased by 1 in
commit 5b53378d8919 ("x86/mm/dump_pagetables: Fix printout of p4d level")
and the comment "Bit 7 has a different meaning" was not updated, so this
change also makes the code match the comment again.
Link: http://lkml.kernel.org/r/20191218162402.45610-24-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:36:34 +0000 (17:36 -0800)]
arm64: mm: display non-present entries in ptdump
Previously the /sys/kernel/debug/kernel_page_tables file would only show
lines for entries present in the page tables. However it is useful to
also show non-present entries as this makes the size and level of the
holes more visible. This aligns the behaviour with x86 which also shows
holes.
Link: http://lkml.kernel.org/r/20191218162402.45610-23-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:36:11 +0000 (17:36 -0800)]
x86: mm+efi: convert ptdump_walk_pgd_level() to take a mm_struct
To enable x86 to use the generic walk_page_range() function, the callers
of ptdump_walk_pgd_level() need to pass an mm_struct rather than the raw
pgd_t pointer. Luckily since commit 1926a76ca9ae ("efi: Use efi_mm in x86
as well as ARM") we now have an mm_struct for EFI on x86.
Link: http://lkml.kernel.org/r/20191218162402.45610-18-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:36:07 +0000 (17:36 -0800)]
x86: mm: point to struct seq_file from struct pg_state
mm/dump_pagetables.c passes both struct seq_file and struct pg_state down
the chain of walk_*_level() functions to be passed to note_page().
Instead place the struct seq_file in struct pg_state and access it from
struct pg_state (which is private to this file) in note_page().
Link: http://lkml.kernel.org/r/20191218162402.45610-17-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:36:03 +0000 (17:36 -0800)]
mm: pagewalk: add 'depth' parameter to pte_hole
The pte_hole() callback is called at multiple levels of the page tables.
Code dumping the kernel page tables needs to know what at what depth the
missing entry is. Add this is an extra parameter to pte_hole(). When the
depth isn't know (e.g. processing a vma) then -1 is passed.
The depth that is reported is the actual level where the entry is missing
(ignoring any folding that is in place), i.e. any levels where
PTRS_PER_P?D is set to 1 are ignored.
Note that depth starts at 0 for a PGD so that PUD/PMD/PTE retain their
natural numbers as levels 2/3/4.
Link: http://lkml.kernel.org/r/20191218162402.45610-16-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Tested-by: Zong Li <zong.li@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:35:58 +0000 (17:35 -0800)]
mm: pagewalk: fix termination condition in walk_pte_range()
If walk_pte_range() is called with a 'end' argument that is beyond the
last page of memory (e.g. ~0UL) then the comparison between 'addr' and
'end' will always fail and the loop will be infinite. Instead change the
comparison to >= while accounting for overflow.
Link: http://lkml.kernel.org/r/20191218162402.45610-15-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Price [Tue, 4 Feb 2020 01:35:54 +0000 (17:35 -0800)]
mm: pagewalk: don't lock PTEs for walk_page_range_novma()
walk_page_range_novma() can be used to walk page tables or the kernel or
for firmware. These page tables may contain entries that are not backed
by a struct page and so it isn't (in general) possible to take the PTE
lock for the pte_entry() callback. So update walk_pte_range() to only
take the lock when no_vma==false by splitting out the inner loop to a
separate function and add a comment explaining the difference to
walk_page_range_novma().
Link: http://lkml.kernel.org/r/20191218162402.45610-14-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log