Jani Nikula [Wed, 7 Aug 2019 12:04:15 +0000 (15:04 +0300)]
drm/i915: split out intel_pch.[ch] from i915_drv.[ch]
Abstract the rather self-contained piece of code from i915_drv.[ch]. No
functional changes.
Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190807120415.17917-1-jani.nikula@intel.com
Insert few more failure points into firmware fetch procedure to check
use of the wrong blob name or use of the mismatched firmware versions.
Also update some messages (remove ptr, duplicated infos) and stop
treating all fetch errors as missing firmware case.
v2: update log levels (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: fixup compiler warning for non-debug builds] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190807183759.8588-1-michal.wajdeczko@intel.com
drm/i915/uc: WOPCM programming errors are not always real
WOPCM programming error might be due to inserted earlier probe
failure that could affects HuC firmware loading and thus impacts
result of WOPCM partitioning that would be now incompatible with
previously programmed values.
drm/i915: Don't try to partition WOPCM without GuC firmware
For meaningful WOPCM partitioning we need GuC (and optionally HuC)
firmware size(s) and we shouldn't just rely on GuC support flag,
as we might fail to fetch GuC firmware and it's size will be 0
and all calculations will be just wrong/useless.
drm/i915/perf: Refactor oa object to better manage resources
The oa object manages the oa buffer and must be allocated when the user
intends to read performance counter snapshots. This can be achieved by
making the oa object part of the stream object which is allocated when a
stream is opened by the user.
Attributes in the oa object that are gen-specific are moved to the perf
object so that they can be initialized on driver load.
The split provides a better separation of the objects used in perf
implementation of i915 driver so that resources are allocated and
initialized only when needed.
v2: Fix checkpatch warnings
v3: Addressed Lionel's review comment
v4: Rebase
v5: Fix rebase/merge issue with ratelimit_state_init
Chris Wilson [Wed, 7 Aug 2019 14:20:41 +0000 (15:20 +0100)]
drm/i915: Isolate i915_getparam_ioctl()
This giant switch has tendrils all other the struct and does not fit
in with the rest of the driver bring up and control in i915_drv.c. Push
it to one side so that it can grow in peace.
Chris Wilson [Wed, 7 Aug 2019 11:38:27 +0000 (12:38 +0100)]
drm/i915: Include the DRIVER_DATE in the error state
For forklifted frankenkernels, the reported kernel version has no
bearing on the actual driver version. Include our own driver date that
is updated every time we tag drm-intel-next.
Dan Carpenter [Wed, 7 Aug 2019 12:28:32 +0000 (15:28 +0300)]
drm/i915: Fix some NULL vs IS_ERR() conditions
There were several places which check for NULL when they should have
been checking for IS_ERR().
Fixes: d8af05ff38ae ("drm/i915: Allow sharing the idle-barrier from other kernel requests") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190807122832.GA10517@mwanda
Chris Wilson [Wed, 7 Aug 2019 11:04:31 +0000 (12:04 +0100)]
drm/i915: Rename engines to match their user interface
During engine setup, we may find that some engines are fused off causing
a misalignment between internal names and the instances seen by users,
e.g. (I915_ENGINE_CLASS_VIDEO_DECODE, 1) may be vcs2 in hardware.
Normally this is invisible to the user, but a few debug interfaces (and
our own internal tracing) use the original HW name not the name the user
would expect as formed from their class:instance tuple. Replace our
internal name with the uabi name for consistency with, for example, error
states.
v2: Keep the pretty printing of class name in the selftest
Chris Wilson [Wed, 7 Aug 2019 09:41:28 +0000 (10:41 +0100)]
drm/i915: Drop expectations of VM_IO from our GGTT mmappings
We don't really want to use VM_IO for our GGTT mmaps (it implies that
the mmap contains memory mapped registers, which we do not expose) yet I
overzealously added it to an assert just because that's how we always
had setup the vma.
Increase abstraction of display suspend/resume operations by providing
higher level functions, and hiding the details inside
intel_display_power.c.
v2: Make checkpatch happy:
- braces {} are not necessary for single statement blocks
v3: Also move hsw/bdw PC8 sequences since they are related to
display PM anyways. (Ville)
v4: Rebase after a long time, plus Move functions to the new
intel_display_power so we can stop exporting platform specific
functions as pointed by Jani.
v5: Remove unnecessary braces.
v6 by Jani: make this purely non-functional cleanup, make functions static
Jani Nikula [Tue, 6 Aug 2019 10:07:30 +0000 (13:07 +0300)]
drm/i915: remove unnecessary includes of intel_display_types.h header
With its original name intel_drv.h the intel_display_types.h header was
superfluously cargo-cult included all over the place, while it's really
mostly about display internals. Remove the unnecessary includes.
Jani Nikula [Tue, 6 Aug 2019 11:39:33 +0000 (14:39 +0300)]
drm/i915: rename intel_drv.h to display/intel_display_types.h
Everything about the file is about display, and mostly about types
related to display. Move under display/ as intel_display_types.h to
reflect the facts.
There's still plenty to clean up, but start off with moving the file
where it logically belongs and naming according to contents.
v2: fix the include guard name in the renamed file
Jani Nikula [Tue, 6 Aug 2019 10:07:25 +0000 (13:07 +0300)]
drm/i915/bw: make intel_atomic_get_bw_state() static
No need for this function to be accessible outside of intel_bw.c. Avoid
including the i915_drv.h mega header from other header files to make
further header cleanup easier.
Jani Nikula [Tue, 6 Aug 2019 10:07:22 +0000 (13:07 +0300)]
drm/i915: move intel_display.c function declarations
Move the declarations of functions in intel_display.c to
intel_display.h. There is still plenty of cleanup to do in
intel_display.[ch], but one step at a time.
Chris Wilson [Tue, 6 Aug 2019 12:43:00 +0000 (13:43 +0100)]
drm/i915/gt: Move the [class][inst] lookup for engines onto the GT
To maintain a fast lookup from a GT centric irq handler, we want the
engine lookup tables on the intel_gt. To avoid having multiple copies of
the same multi-dimension lookup table, move the generic user engine
lookup into an rbtree (for fast and flexible indexing).
v2: Split uabi_instance cf uabi_class
v3: Set uabi_class/uabi_instance after collating all engines to provide a
stable uabi across parallel unordered construction.
Chris Wilson [Tue, 6 Aug 2019 12:42:59 +0000 (13:42 +0100)]
drm/i915/gem: Make caps.scheduler static
We do not notify userspace when the scheduler capabilities are changed
(due to wedging the driver) and as such userspace will expect the caps
to be static and unchanging. Make it so, and so we only need to compute
our caps once during driver registration.
Chris Wilson [Tue, 6 Aug 2019 07:42:19 +0000 (08:42 +0100)]
drm/i915: Use drm_i915_private directly from drv_get_drvdata()
As we store a pointer to i915 in the drvdata field (as the pointer is both
an alias to the drm_device and drm_i915_private), we can use the stored
pointer directly as the i915 device.
v2: Store and use i915 inside drv_get_drvdata()
v3: Only expect i915 inside drv_get_drvdata() so drop the assumed
i915/drm equivalence.
Chris Wilson [Sat, 3 Aug 2019 10:22:21 +0000 (11:22 +0100)]
drm/i915/gt: Remove stale kerneldoc for internal MOCS functions
The kerneldoc were stale, generating mismatching parameters warning, but
furthermore they were for internal routines, not part of the MOCS
interface so the instructions were superfluous.
Since commit 301efe96f777 ("drm/i915/uc: Don't fail on HuC
firmware failure") we can continue driver load after error
during HuC firmware load or authentication, but we could
still fail on any error during early HuC initialization.
Change that by ignoring HuC related errors until hardware
initialization phase where we can decide about next steps.
Since commit db81bc6eb9c0 ("drm/i915/uc: Consider enable_guc
modparam during fw selection") we have started using firmware
status as main indicator of the GuC support. No need to use
same checks twice.
drm/i915: Fix wrong escape clock divisor init for GLK
According to Bspec clock divisor registers in GeminiLake
should be initialized by shifting 1(<<) to amount of correspondent
divisor. While i915 was writing all this time that value as is.
Surprisingly that it by accident worked, until we met some issues
with Microtech Etab.
v2: Added Fixes tag and cc
v3: Added stable to cc as well.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826 Fixes: bcc657004841 ("drm/i915/glk: Program txesc clock divider for GLK") Cc: Deepak M <m.deepak@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190712081938.14185-1-stanislav.lisovskiy@intel.com
Chris Wilson [Sun, 4 Aug 2019 12:48:26 +0000 (13:48 +0100)]
drm/i915: Replace struct_mutex for batch pool serialisation
Switch to tracking activity via i915_active on individual nodes, only
keeping a list of retired objects in the cache, and reaping the cache
when the engine itself idles.
Chris Wilson [Sun, 4 Aug 2019 12:48:25 +0000 (13:48 +0100)]
drm/i915: Teach execbuffer to take the engine wakeref not GT
In the next patch, we would like to couple into the engine wakeref to
free the batch pool on idling. The caveat here is that we therefore want
to track the engine wakeref more precisely and to hold it instead of the
broader GT wakeref as we process the ioctl.
v2: Avoid introducing odd semantics for a shortlived timeline->mutex
acquisition interface.
Chris Wilson [Fri, 2 Aug 2019 21:21:37 +0000 (22:21 +0100)]
drm/i915: Flush the freed object list on file close
As we increase the number of RCU objects, it becomes easier for us to
have several hundred thousand objects in the deferred RCU free queues.
An example is gem_ctx_create/files which continually creates active
contexts, which are not immediately freed upon close as they are kept
alive by outstanding requests. This lack of backpressure allows the
context objects to persist until they overwhelm and starve the system.
We can increase our backpressure by flushing the freed object queue upon
closing the device fd which should then not impact other clients.
Chris Wilson [Fri, 2 Aug 2019 21:21:36 +0000 (22:21 +0100)]
drm/i915: Hide unshrinkable context objects from the shrinker
The shrinker cannot touch objects used by the contexts (logical state
and ring). Currently we mark those as "pin_global" to let the shrinker
skip over them, however, if we remove them from the shrinker lists
entirely, we don't event have to include them in our shrink accounting.
By keeping the unshrinkable objects in our shrinker tracking, we report
a large number of objects available to be shrunk, and leave the shrinker
deeply unsatisfied when we fail to reclaim those. The shrinker will
persist in trying to reclaim the unavailable objects, forcing the system
into a livelock (not even hitting the dread oomkiller).
v2: Extend unshrinkable protection for perma-pinned scratch and guc
allocations (Tvrtko)
v3: Notice that we should be pinned when marking unshrinkable and so the
link cannot be empty; merge duplicate paths.
drm/i915/wopcm: Don't fail on WOPCM partitioning failure
We don't have to immediately fail on WOPCM partitioning, we can wait
until we will start programming WOPCM registers. This should give us
more options if we decide to restore fallback in case of GuC failures.
With i915 added to i915_inject_probe_failure we can use dedicated
printk when injecting artificial load failure.
Also make this function look like other i915 functions that return
error code and make it more flexible to return any provided error
code instead of previously assumed -ENODEV.
Chris Wilson [Tue, 30 Jul 2019 20:58:05 +0000 (21:58 +0100)]
drm/i915: Report resv_obj allocation failure
Since commit 64d6c500a384 ("drm/i915: Generalise GPU activity
tracking"), we have been prepared for i915_vma_move_to_active() to fail.
We can take advantage of this to report the failure for allocating the
shared-fence slot in the reservation_object.
Jani Nikula [Tue, 30 Jul 2019 11:34:32 +0000 (14:34 +0300)]
drm/i915/oa: update the generated files
Update the generated files to make the headers self-contained, switch to
the kernel preferred SPDX comment format, and update the copyright
year. Also add the Makefile stanza to run header tests on the files.
Other changes produced by gputop i915-perf-kernelgen.py were manually
stripped out, and left to the folks who actually know something about
the OA stuff.
Chris Wilson [Fri, 2 Aug 2019 10:00:15 +0000 (11:00 +0100)]
drm/i915: Allow sharing the idle-barrier from other kernel requests
By placing our idle-barriers in the i915_active fence tree, we expose
those for reuse by other components that are issuing requests along the
kernel_context. Reusing the proto-barrier active_node is perfectly fine
as the new request implies a context-switch, and so an opportune point
to run the idle-barrier. However, the proto-barrier is not equivalent
to a normal active_node and care must be taken to avoid dereferencing the
ERR_PTR used as its request marker.
v2: Comment the more egregious cheek
v3: A glossary!
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: ce476c80b8bf ("drm/i915: Keep contexts pinned until after the next kernel context switch") Fixes: a9877da2d629 ("drm/i915/oa: Reconfigure contexts on the fly") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190802100015.1281-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 30 Jul 2019 11:21:51 +0000 (12:21 +0100)]
drm/i915: Flush extra hard after writing relocations through the GTT
Recently discovered in commit bdae33b8b82b ("drm/i915: Use maximum write
flush for pwrite_gtt") was that we needed to our full write barrier
before changing the GGTT PTE to ensure that our indirect writes through
the GTT landed before the PTE changed (and the writes end up in a
different page). That also applies to our GGTT relocation path.
Chris Wilson [Thu, 1 Aug 2019 23:36:16 +0000 (00:36 +0100)]
drm/i915/pmu: Atomically acquire the gt_pm wakeref
Currently, we only sample if the intel_gt is awake, but we acquire our
own runtime_pm wakeref. Since intel_gt has transitioned to tracking its
own wakeref, we can atomically test and acquire that wakeref instead.
As we already track GuC/HuC uses by other means than modparam
there is no point in sanitizing it. Just scan modparam for
major discrepancies between what was requested vs actual.
Michal Wajdeczko [Wed, 31 Jul 2019 22:33:20 +0000 (22:33 +0000)]
drm/i915/guc: Use dedicated flag to track submission mode
Instead of relying on enable_guc modparam to represent actual
GuC submission mode, use dedicated flag and look at modparam
only to check if submission was explicitly disabled by the user.
Michal Wajdeczko [Wed, 31 Jul 2019 22:33:19 +0000 (22:33 +0000)]
drm/i915/uc: Consider enable_guc modparam during fw selection
We can use value of enable_guc modparam during firmware path selection
and start using firmware status to see if GuC/HuC is being used.
This is first step to make enable_guc modparam read-only.
To be called from the top level runtime functions, to hide the
gt-specific bits (mainly related to intel_uc).
v2: rebased
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-3-daniele.ceraolospurio@intel.com
drm/i915/uc: Move uC early functions inside the GT ones
uC is a subcomponent of GT, so initialize/clean it as part of it. The
wopcm_init_early doesn't have to be happen before the uC one, but since
in other parts of the code we consider WOPCM first do the same for
consistency.
v2: s/cleanup_early/late_release to match the caller
v3: s/late_release/driver_late_release/ (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-2-daniele.ceraolospurio@intel.com
drm/i915/gt: Move gt_cleanup_early out of gem_cleanup_early
We don't call the init_early function from within the gem code, so we
shouldn't do it for the cleanup either.
v2: while at it, s/gt_cleanup_early/gt_late_release (Chris)
v3: s/late_release/driver_late_release/ (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190801005709.34092-1-daniele.ceraolospurio@intel.com
Chris Wilson [Tue, 30 Jul 2019 13:30:26 +0000 (14:30 +0100)]
drm/i915: Remove lrc default desc from GEM context
We only compute the lrc_descriptor() on pinning the context, i.e.
infrequently, so we do not benefit from storing the template as the
addressing mode is also fixed for the lifetime of the intel_context.
Matt Roper [Tue, 30 Jul 2019 22:05:53 +0000 (15:05 -0700)]
drm/i915/ehl: Don't forget to handle port C's hotplug interrupts
We're mostly re-using ICL's interrupt handling on EHL, but we still need
to remember to account for the extra combo port that EHL has. Use TGP's
mask (which includes combo port C) rather than ICP's mask when
appropriate. Let's also skip reading TC-specific registers on this
platform since EHL doesn't have any TC ports.
v2: Base setup of SHOTPLUG_CTL_TC on whether the tc pin mask is non-zero
rather than performing another PCH type check. (Jose)
Jani Nikula [Tue, 30 Jul 2019 11:34:30 +0000 (14:34 +0300)]
drm/i915/oa: add content to Makefile
Apparently the empty Makefile has caused some confusion. Add the
subdir-cc-flags-y as in 7fcc7ca549d4 ("drm/i915: add header search path
to subdir Makefiles") which should be useful.
The generated headers still aren't self-contained, so can't add that.
drm/i915: fix possible memory leak in intel_hdcp_auth_downstream()
'ksv_fifo' is malloced in intel_hdcp_auth_downstream() and should be
freed before leaving from the error handling cases, otherwise it will
cause memory leak.
Chris Wilson [Tue, 30 Jul 2019 13:30:19 +0000 (14:30 +0100)]
drm/i915/execlists: Always clear pending&inflight requests on reset
If we skip the reset as we found the engine inactive at the time of the
reset, we still need to clear the residual inflight & pending request
bookkeeping to reflect the current state of HW.
Michel Thierry [Tue, 30 Jul 2019 18:04:06 +0000 (11:04 -0700)]
drm/i915/tgl: Tigerlake only has global MOCS registers
Until Icelake, each engine had its own set of 64 MOCS registers. In
order to simplify, Tigerlake moves to only 64 Global MOCS registers,
which are no longer part of the engine context. Since these registers
are now global, they also only need to be initialized once.
>From Gen12 onwards, MOCS must specify the target cache (3:2) and LRU
management (5:4) fields and cannot be programmed to 'use the value from
Private PAT', because these fields are no longer part of the PPAT. Also
cacheability control (1:0) field has changed, 00 no longer means 'use
controls from page table', but uncacheable (UC).
v2 (Lucas):
- Move the changes to the fault registers to a separate commit - the
old ones overlap with the range used by the new global MOCS
(requested by Daniele)
v3 (Lucas):
- Clarify comment about setting the unused entries to the same value
of index 0, that is the invalid entry (requested by Daniele)
- Move changes to DONE_REG and ERROR_GEN6 to a separate commit
(requested by Daniele)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-5-lucas.demarchi@intel.com
Tomasz Lis [Tue, 30 Jul 2019 18:04:05 +0000 (11:04 -0700)]
drm/i915/tgl: Define MOCS entries for Tigerlake
The MOCS table is published as part of bspec, and versioned. Entries
are supposed to never be modified, but new ones can be added. Adding
entries increases table version. The patch includes version 1 entries.
Two of the 3 legacy entries used for gen9 are no longer expected to work.
Although we are changing the gen11 table, those changes are supposed to
be backward compatible since we are only touching previously undefined
entries.
v2: Add the missing entries in 49-51 range and replace "HW reserved"
terminology to what it actually is: L1 is implicitly enabled
(from Daniele)
v3: Use a different table for Tiger Lake since entries 0 and 1 are not
the same (from Daniele)
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Tomasz Lis <tomasz.lis@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730180407.5993-4-lucas.demarchi@intel.com
The register we write are not WOPCM regs but uC ones related to how
GuC and HuC are going to use the WOPCM, so it makes logical sense
for them to be programmed as part of uc_init_hw. The WOPCM map on the
other side is not uC-specific (although that is our main use-case), so
keep that separate.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-2-daniele.ceraolospurio@intel.com
drm/i915/uc: Don't enable communication twice on resume
When coming out of S3/S4 we sanitize and re-init the HW, which includes
enabling communication during uc_init_hw. We therefore don't want to do
that again in uc_resume and can just tell GuC to reload its state.
v2: split uc_resume and uc_runtime_resume to match the suspend
functions and to better differentiate the expected state in the 2
scenarios (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190730230743.19542-1-daniele.ceraolospurio@intel.com
Chris Wilson [Wed, 31 Jul 2019 08:11:26 +0000 (09:11 +0100)]
drm/i915/selftests: Pass intel_context to igt_spinner
Teach igt_spinner to only use our internal structs, decoupling the
interface from the GEM contexts. This makes it easier to avoid
requiring ce->gem_context back references for kernel_context that may
have them in future.
v2: Lift engine lock to verify_wa() caller.
v3: Less than v2, but more so
Chris Wilson [Tue, 30 Jul 2019 16:34:41 +0000 (17:34 +0100)]
drm/i915: Avoid ce->gem_context->i915
My plan for the future is to have kernel contexts not to have a GEM
context backpointer (as they will not belong to any GEM context). In a
few places, we use ce->gem_context to simply obtain the i915 backpointer,
for which we can use ce->engine->i915 instead.
Lucas De Marchi [Tue, 30 Jul 2019 18:17:59 +0000 (11:17 -0700)]
drm/i915: make i915_selftest.h self-contained
Fix build breakage:
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_selftest.h:125:1: error: unknown type name ‘bool’
125 | bool __igt_timeout(unsigned long timeout, const char *fmt, ...);
| ^~~~
drm/i915/tgl: Update north display hotplug detection to TGL connections
TGL has 3 combophys and 6 TC/TBT ports, so it has 2 more TC/TBT ports
than ICL and the PORT_C on TGL is a combophy.
So here adding a new hpd north table and function to detect long
pulse for TGL.
Chris Wilson [Tue, 30 Jul 2019 14:32:09 +0000 (15:32 +0100)]
drm/i915/gt: Provide a local intel_context.vm
Track the currently bound address space used by the HW context. Minor
conversions to use the local intel_context.vm are made, leaving behind
some more surgery required to make intel_context the primary through the
selftests.
Chris Wilson [Tue, 30 Jul 2019 14:32:08 +0000 (15:32 +0100)]
drm/i915: Move aliasing_ppgtt underneath its i915_ggtt
The aliasing_ppgtt provides a PIN_USER alias for the global gtt, so move
it under the i915_ggtt to simplify later transformations to enable
intel_context.vm.
Chris Wilson [Mon, 29 Jul 2019 11:37:20 +0000 (12:37 +0100)]
drm/i915: Inline engine->init_context into its caller
We only use the init_context vfunc once while recording the default
context state, and we use the same sequence in each backend (eliding
steps that do not apply). Remove the vfunc for simplicity and
de-duplication.
Michal Wajdeczko [Mon, 29 Jul 2019 11:26:12 +0000 (11:26 +0000)]
drm/i915/uc: Don't fail on HuC firmware failure
HuC is usually not a critical component, so we can safely ignore
firmware load or authentication failures unless HuC was explicitly
requested by the user.
v2: add convenient way to disable loading (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190729112612.37476-1-michal.wajdeczko@intel.com
Chris Wilson [Mon, 29 Jul 2019 13:24:12 +0000 (14:24 +0100)]
drm/i915: Flush the i915_vm_release before ggtt shutdown
As the gen6_ppgtt may refer back to the GGTT for their page-directory
slots, make sure those __i915_vm_release are completed prior to shutting
down the GGTT.
Chris Wilson [Sat, 27 Jul 2019 09:54:41 +0000 (10:54 +0100)]
drm/i915/uc: Fixup kerneldoc after params were flipped and renamed
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:194: warning: Function parameter or member 'i915' not described in 'intel_uc_fw_fetch'
drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:194: warning: Excess function parameter 'dev_priv' description in 'intel_uc_fw_fetch'
Fixes: 97dee74bb34a ("drm/i915/uc: Reorder params in intel_uc_fw_fetch") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190727101055.5300-1-chris@chris-wilson.co.uk
In GEN 12 PORT_C DDI clk_off bit is not equally distanced to A/B,
it's at offset 24. Similarly TC port (5/6) clk off bits are at
offset 22/23. Extend the macros to cover the additional ports.
projects / kernel.git / log