]> git.baikalelectronics.ru Git - kernel.git/log
kernel.git
3 years agoMerge tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 29 Aug 2021 17:36:32 +0000 (10:36 -0700)]
Merge tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Prevent the amd/power module from being removed while in use

 - Mark AMD IBS as not supporting content exclusion

 - Add a workaround for AMD erratum #1197 where IBS registers might not
   be restored properly after exiting CC6 state

 - Fix a potential truncation of a 32-bit variable due to shifting

 - Read the correct bits describing the number of configurable address
   ranges on Intel PT

* tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/power: Assign pmu.module
  perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op
  perf/x86/amd/ibs: Work around erratum #1197
  perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32
  perf/x86/intel/pt: Fix mask of num_address_ranges

3 years agoMerge tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 29 Aug 2021 17:26:00 +0000 (10:26 -0700)]
Merge tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Fix build error on RHEL where -Werror=maybe-uninitialized is set.

 - Restore the firmware's IDT when calling EFI boot services and before
   ExitBootServices() has been called. This fixes a boot failure on what
   appears to be a tablet with 32-bit UEFI running a 64-bit kernel.

* tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Fix a maybe-uninitialized build warning treated as error
  x86/efi: Restore Firmware IDT before calling ExitBootServices()

3 years agoRevert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy...
Helge Deller [Fri, 27 Aug 2021 18:42:57 +0000 (20:42 +0200)]
Revert "parisc: Add assembly implementations for memset, strlen, strcpy, strncpy and strcat"

This reverts commit 83af58f8068ea3f7b3c537c37a30887bfa585069.

It turns out that at least the assembly implementation for strncpy() was
buggy.  Revert the whole commit and return back to the default coding.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.4+
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 28 Aug 2021 18:39:16 +0000 (11:39 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
 "A single fix for a race introduced by a fix that went into 5.14-rc5"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Fix hang of freezing queue between blocking and running device

3 years agoMerge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sat, 28 Aug 2021 18:32:16 +0000 (11:32 -0700)]
Merge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a few tiny USB fixes for reported issues with some USB
  drivers.

  These fixes include:

   - gadget driver fixes for regressions

   - tcpm driver fix

   - dwc3 driver fixes

   - xhci renesas firmware loading fix, again.

   - usb serial option driver device id addition

   - usb serial ch341 revert for regression

  All all of these have been in linux-next with no reported problems"

* tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: u_audio: fix race condition on endpoint stop
  usb: gadget: f_uac2: fixup feedback endpoint stop
  usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running
  usb: renesas-xhci: Prefer firmware loading on unknown ROM state
  usb: dwc3: gadget: Stop EP0 transfers during pullup disable
  usb: dwc3: gadget: Fix dwc3_calc_trbs_left()
  Revert "USB: serial: ch341: fix character loss at high transfer rates"
  USB: serial: option: add new VID/PID to support Fibocom FG150

3 years agoMerge tag 'powerpc-5.14-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sat, 28 Aug 2021 17:40:41 +0000 (10:40 -0700)]
Merge tag 'powerpc-5.14-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix scv implicit soft-mask table for relocated (eg. kdump) kernels

 - Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCK, which was disabled due to a
   typo

Thanks to Lukas Bulwahn, Nicholas Piggin, and Daniel Axtens.

* tag 'powerpc-5.14-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix scv implicit soft-mask table for relocated kernels
  powerpc: Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCK

3 years agoMerge tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 27 Aug 2021 23:08:29 +0000 (16:08 -0700)]
Merge tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Revert the mq-deadline priority handling, it's causing serious
   performance regressions. While experimental patches exists to fix
   this up, it's too late to do so now. Revert it and re-do it properly
   for 5.15 instead.

 - Fix a NULL vs IS_ERR() regression in this release (Dan)

 - Fix a mq-deadline accounting regression in this release (Bart)

 - Mark cryptoloop as deprecated. It's broken and dm-crypt fully
   supports it, and it's actively intefering with loop. Plan on removal
   for 5.16 (Christoph)

* tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block:
  cryptoloop: add a deprecation warning
  pd: fix a NULL vs IS_ERR() check
  Revert "block/mq-deadline: Prioritize high-priority requests"
  mq-deadline: Fix request accounting

3 years agoMerge tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Linus Torvalds [Fri, 27 Aug 2021 22:59:00 +0000 (15:59 -0700)]
Merge tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Just two trivial fixes from the reset driver tree, nothing else came
  up since the last soc fixes"

* tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  reset: reset-zynqmp: Fixed the argument data type
  reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5

3 years agoMerge tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 27 Aug 2021 19:18:09 +0000 (12:18 -0700)]
Merge tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Fix a regression introduced during this cycle that has been partially
  addressed by an earlier commit (Andy Shevchenko)"

* tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()

3 years agoMerge tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Fri, 27 Aug 2021 19:06:51 +0000 (12:06 -0700)]
Merge tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix two issues introduced during this cycle, one of which is a
  regression and the other one affects new code.

  Specifics:

   - Prevent the operating performance points (OPP) code from crashing
     when some entries in the table of required OPPs are set to error
     pointer values (Marijn Suijten)

   - Prevent the generic power domains (genpd) framework from
     incorrectly overriding the performance state of a device set by its
     driver while it is runtime-suspended or when runtime PM of it is
     disabled (Dmitry Osipenko)"

* tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: domains: Improve runtime PM performance state handling
  opp: core: Check for pending links before reading required_opp pointers

3 years agovirtio-mem: fix sleeping in RCU read side section in virtio_mem_online_page_cb()
David Hildenbrand [Wed, 25 Aug 2021 10:24:15 +0000 (12:24 +0200)]
virtio-mem: fix sleeping in RCU read side section in virtio_mem_online_page_cb()

virtio_mem_set_fake_offline() might sleep now, and we call it under
rcu_read_lock(). To fix it, simply move the rcu_read_unlock() further
up, as we're done with the device.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6cc26d77613a: "virtio-mem: use page_offline_(start|end) when setting PageOffline()
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoMerge branch 'pm-opp'
Rafael J. Wysocki [Fri, 27 Aug 2021 18:27:01 +0000 (20:27 +0200)]
Merge branch 'pm-opp'

* pm-opp:
  opp: core: Check for pending links before reading required_opp pointers

3 years agoMerge tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 27 Aug 2021 18:04:57 +0000 (11:04 -0700)]
Merge tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - device tree updates for the Microsemi Polarfire development kit that
   fix some mismatches between the u-boot and Linux enternet entries

 - ensure that the F register state is correctly reflected in core dumps

* tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: microchip: Add ethernet0 to the aliases node
  riscv: dts: microchip: Use 'local-mac-address' for emac1
  riscv: Ensure the value of FP registers in the core dump file is up to date

3 years agoMerge tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 27 Aug 2021 16:52:48 +0000 (09:52 -0700)]
Merge tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC host fix from Ulf Hansson:

 - sdhci-iproc: Fix clock error for ACPI rpi's

* tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"

3 years agocryptoloop: add a deprecation warning
Christoph Hellwig [Fri, 27 Aug 2021 16:32:50 +0000 (18:32 +0200)]
cryptoloop: add a deprecation warning

Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013).  Add a warning and a deprecation schedule.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
3 years agoMerge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Linus Torvalds [Fri, 27 Aug 2021 16:00:43 +0000 (09:00 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:
 "Resolve a Keystone 2 kernel mapping regression"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9104/2: Fix Keystone 2 kernel mapping regression

3 years agoRevert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"
Ulf Hansson [Fri, 27 Aug 2021 14:30:36 +0000 (16:30 +0200)]
Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"

This reverts commit 419dd626e357e89fc9c4e3863592c8b38cfe1571.

It turned out that the change from the reverted commit breaks the ACPI
based rpi's because it causes the 100Mhz max clock to be overridden to the
return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a
OF/DT based clock device.

Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Fixes: 419dd626e357 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711")
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
3 years agousb: gadget: u_audio: fix race condition on endpoint stop
Jerome Brunet [Fri, 27 Aug 2021 09:29:27 +0000 (11:29 +0200)]
usb: gadget: u_audio: fix race condition on endpoint stop

If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.

Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.

Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: gadget: f_uac2: fixup feedback endpoint stop
Jerome Brunet [Fri, 27 Aug 2021 07:58:53 +0000 (09:58 +0200)]
usb: gadget: f_uac2: fixup feedback endpoint stop

When the uac2 function is stopped, there seems to be an issue reported on
some platforms (Intel Merrifield at least)

BUG: kernel NULL pointer dereference, address: 0000000000000008
...
RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0
...
Call Trace:
 dwc3_remove_requests.constprop.0+0x12f/0x170
 __dwc3_gadget_ep_disable+0x7a/0x160
 dwc3_gadget_ep_disable+0x3d/0xd0
 usb_ep_disable+0x1c/0x70
 u_audio_stop_capture+0x79/0x120 [u_audio]
 afunc_set_alt+0x73/0x80 [usb_f_uac2]
 composite_setup+0x224/0x1b90 [libcomposite]

The issue happens only when the gadget is using the sync type "async", not
"adaptive". This indicates that problem is coming from the feedback
endpoint, which is only used with async synchronization mode.

The problem is that request is freed regardless of usb_ep_dequeue(), which
ends up badly if the request is not actually dequeued yet.

Update the feedback endpoint free function to release the endpoint the same
way it is done for the data endpoint, which takes care of the problem.

Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agopd: fix a NULL vs IS_ERR() check
Dan Carpenter [Fri, 27 Aug 2021 10:00:23 +0000 (13:00 +0300)]
pd: fix a NULL vs IS_ERR() check

blk_mq_alloc_disk() returns error pointers, it doesn't return NULL
so correct the check.

Fixes: 262d431f9000 ("pd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210827100023.GB9449@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
3 years agoMerge tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 27 Aug 2021 01:44:25 +0000 (18:44 -0700)]
Merge tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Last set of fixes for 5.14, nothing major a couple of i915, couple of
  imx and a few amdgpu. All pretty small.

  i915:
   - Fix syncmap memory leak
   - Drop redundant display port debug print

  amdgpu:
   - Fix for pinning display buffers multiple times
   - Fix delayed work handling for GFXOFF
   - Fix build when CONFIG_SUSPEND is not set

  imx:
   - fix planar offset calculations
   - fix accidental partial revert"

* tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/dp: Drop redundant debug print
  drm/i915: Fix syncmap memory leak
  drm/amdgpu: Fix build with missing pm_suspend_target_state module export
  drm/amdgpu: Cancel delayed work when GFXOFF is disabled
  drm/amdgpu: use the preferred pin domain after the check
  drm/imx: ipuv3-plane: fix accidental partial revert of 8 pixel alignment fix
  gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats

3 years agoMerge tag 'imx-drm-fixes-2021-08-18' of git://git.pengutronix.de/pza/linux into drm...
Dave Airlie [Fri, 27 Aug 2021 00:49:32 +0000 (10:49 +1000)]
Merge tag 'imx-drm-fixes-2021-08-18' of git://git.pengutronix.de/pza/linux into drm-fixes

drm/imx: imx-drm alignment and plane offset fixes

Fix an accidental partial revert of commit 94dfec48fca7 ("drm/imx: Add 8
pixel alignment fix") and plane offset calculations for capture of
non-aligned resolutions.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/85a41af99beb2c9e7d6020435a135bf9f205a5ff.camel@pengutronix.de
3 years agoMerge tag 'amd-drm-fixes-5.14-2021-08-25' of https://gitlab.freedesktop.org/agd5f...
Dave Airlie [Fri, 27 Aug 2021 00:24:07 +0000 (10:24 +1000)]
Merge tag 'amd-drm-fixes-5.14-2021-08-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.14-2021-08-25:

amdgpu:
- Fix for pinning display buffers multiple times
- Fix delayed work handling for GFXOFF
- Fix build when CONFIG_SUSPEND is not set

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210826032658.4068-1-alexander.deucher@amd.com
3 years agoMerge tag 'drm-intel-fixes-2021-08-26' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Fri, 27 Aug 2021 00:13:37 +0000 (10:13 +1000)]
Merge tag 'drm-intel-fixes-2021-08-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix syncmap memory leak
- Drop redundant display port debug print

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YSfSeHbyS5wBZtNJ@intel.com
3 years agoMerge tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 26 Aug 2021 20:26:40 +0000 (13:26 -0700)]
Merge tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux

Pull nfsd fix from Bruce Fields:
 "This is a one-liner fix for a serious bug that can cause the server to
  become unresponsive to a client, so I think it's worth the last-minute
  inclusion for 5.14"

* tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...

3 years agoMerge tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Thu, 26 Aug 2021 20:20:22 +0000 (13:20 -0700)]
Merge tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from can and bpf.

  Closing three hw-dependent regressions. Any fixes of note are in the
  'old code' category. Nothing blocking release from our perspective.

  Current release - regressions:

   - stmmac: revert "stmmac: align RX buffers"

   - usb: asix: ax88772: move embedded PHY detection as early as
     possible

   - usb: asix: do not call phy_disconnect() for ax88178

   - Revert "net: really fix the build...", from Kalle to fix QCA6390

  Current release - new code bugs:

   - phy: mediatek: add the missing suspend/resume callbacks

  Previous releases - regressions:

   - qrtr: fix another OOB Read in qrtr_endpoint_post

   - stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings

  Previous releases - always broken:

   - inet: use siphash in exception handling

   - ip_gre: add validation for csum_start

   - bpf: fix ringbuf helper function compatibility

   - rtnetlink: return correct error on changing device netns

   - e1000e: do not try to recover the NVM checksum on Tiger Lake"

* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
  Revert "net: really fix the build..."
  net: hns3: fix get wrong pfc_en when query PFC configuration
  net: hns3: fix GRO configuration error after reset
  net: hns3: change the method of getting cmd index in debugfs
  net: hns3: fix duplicate node in VLAN list
  net: hns3: fix speed unknown issue in bond 4
  net: hns3: add waiting time before cmdq memory is released
  net: hns3: clear hardware resource when loading driver
  net: fix NULL pointer reference in cipso_v4_doi_free
  rtnetlink: Return correct error on changing device netns
  net: dsa: hellcreek: Adjust schedule look ahead window
  net: dsa: hellcreek: Fix incorrect setting of GCL
  cxgb4: dont touch blocked freelist bitmap after free
  ipv4: use siphash instead of Jenkins in fnhe_hashfun()
  ipv6: use siphash in rt6_exception_hash()
  can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
  net: usb: asix: ax88772: fix boolconv.cocci warnings
  net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
  qede: Fix memset corruption
  net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
  ...

3 years agoRevert "block/mq-deadline: Prioritize high-priority requests"
Jens Axboe [Thu, 26 Aug 2021 18:59:44 +0000 (12:59 -0600)]
Revert "block/mq-deadline: Prioritize high-priority requests"

This reverts commit fb926032b3209300f9dc454a36b8299582ae545c.

Zhen reports that this commit slows down mq-deadline on a 128 thread
box, going from 258K IOPS to 170-180K. My testing shows that Optane
gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box.

Looking in detail at the code, the main culprit here is needing to sum
percpu counters in the dispatch hot path, leading to very high CPU
utilization there. To make matters worse, the code currently needs to
sum 2 percpu counters, and it does so in the most naive way of iterating
possible CPUs _twice_.

Since we're close to release, revert this commit and we can re-do it
with regular per-priority counters instead for the 5.15 kernel.

Link: https://lore.kernel.org/linux-block/20210826144039.2143-1-thunder.leizhen@huawei.com/
Reported-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
3 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Thu, 26 Aug 2021 18:26:00 +0000 (11:26 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fix from Will Deacon:
 "We received a report this week that the generic version of
  pfn_valid(), which we switched to this merge window in 16c9afc77660
  ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), interacts badly with
  dma_map_resource() due to the following check:

        /* Don't allow RAM to be mapped */
        if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
                return DMA_MAPPING_ERROR;

  Since the ongoing saga to determine the semantics of pfn_valid() is
  unlikely to be resolved this week (does it indicate valid memory, or
  just the presence of a struct page, or whether that struct page has
  been initialised?), just revert back to our old version of pfn_valid()
  for 5.14.

  Summary:

   - Fix dma_map_resource() by reverting back to old pfn_valid() code"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"

3 years agoMerge tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client
Linus Torvalds [Thu, 26 Aug 2021 18:18:30 +0000 (11:18 -0700)]
Merge tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "Two memory management fixes for the filesystem"

* tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client:
  ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
  ceph: correctly handle releasing an embedded cap flush

3 years agoRevert "net: really fix the build..."
Kalle Valo [Thu, 26 Aug 2021 17:28:16 +0000 (20:28 +0300)]
Revert "net: really fix the build..."

This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88.

Wren and Nicolas reported that ath11k was failing to initialise QCA6390
Wi-Fi 6 device with error:

qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22

Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in
v5.14-rc5, caused this regression in qrtr. Most likely all ath11k
devices are broken, but I only tested QCA6390. Let's revert the broken
commit so that ath11k works again.

Reported-by: Wren Turkal <wt@penguintechs.org>
Reported-by: Nicolas Schichan <nschichan@freebox.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave...
Linus Torvalds [Thu, 26 Aug 2021 18:05:11 +0000 (11:05 -0700)]
Merge tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fix from David Sterba:
 "One more fix that I think qualifies for a late merge. It's a revert of
  a one-liner fix that meanwhile got backported to stable kernels and we
  got reports from users.

  The broken fix prevents creating compressed inline extents, which
  could be noticeable on space consumption.

  Technically it's a regression as the patch was merged in 5.14-rc1 but
  got propagated to several stable kernels and has higher exposure than
  a 'typical' development cycle bug"

* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: compression: don't try to compress if we don't have enough pages"

3 years agomedia: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()
Andy Shevchenko [Thu, 26 Aug 2021 10:53:24 +0000 (13:53 +0300)]
media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()

The commit 71f642833284 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") moved adev assignment outside of error
path and hence made acpi_dev_put(sensor->adev) a no-op. We still
need to drop reference count on error path, and to achieve that,
replace sensor->adev by locally assigned adev.

Fixes: 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()")
Depends-on: fc68f42aa737 ("ACPI: fix NULL pointer dereference")
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
3 years agoMerge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Jakub Kicinski [Thu, 26 Aug 2021 15:43:20 +0000 (08:43 -0700)]
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
bpf 2021-08-26

We've added 1 non-merge commit during the last 1 day(s):

1) Fix ringbuf helper function compatibility, from Daniel.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Fix ringbuf helper function compatibility
====================

Link: https://lore.kernel.org/r/20210826153720.19083-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge branch 'net-hns3-add-some-fixes-for-net'
Jakub Kicinski [Thu, 26 Aug 2021 14:24:20 +0000 (07:24 -0700)]
Merge branch 'net-hns3-add-some-fixes-for-net'

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Link: https://lore.kernel.org/r/1629976921-43438-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: fix get wrong pfc_en when query PFC configuration
Guangbin Huang [Thu, 26 Aug 2021 11:22:01 +0000 (19:22 +0800)]
net: hns3: fix get wrong pfc_en when query PFC configuration

Currently, when query PFC configuration by dcbtool, driver will return
PFC enable status based on TC. As all priorities are mapped to TC0 by
default, if TC0 is enabled, then all priorities mapped to TC0 will be
shown as enabled status when query PFC setting, even though some
priorities have never been set.

for example:
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on

To fix this problem, just returns user's PFC config parameter saved in
driver.

Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: fix GRO configuration error after reset
Yufeng Mo [Thu, 26 Aug 2021 11:22:00 +0000 (19:22 +0800)]
net: hns3: fix GRO configuration error after reset

The GRO configuration is enabled by default after reset. This
is incorrect and should be restored to the user-configured value.
So this restoration is added during reset initialization.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: change the method of getting cmd index in debugfs
Yufeng Mo [Thu, 26 Aug 2021 11:21:59 +0000 (19:21 +0800)]
net: hns3: change the method of getting cmd index in debugfs

Currently, the cmd index is obtained in debugfs by comparing file names.
However, this method may cause errors when processing more complex file
names. So, change this method by saving cmd in private data and comparing
it when getting cmd index in debugfs for optimization.

Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: fix duplicate node in VLAN list
Guojia Liao [Thu, 26 Aug 2021 11:21:58 +0000 (19:21 +0800)]
net: hns3: fix duplicate node in VLAN list

VLAN list should not be added duplicate VLAN node, otherwise it would
cause "add failed" when restore VLAN from VLAN list, so this patch adds
VLAN ID check before adding node into VLAN list.

Fixes: c6075b193462 ("net: hns3: Record VF vlan tables")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: fix speed unknown issue in bond 4
Yonglong Liu [Thu, 26 Aug 2021 11:21:57 +0000 (19:21 +0800)]
net: hns3: fix speed unknown issue in bond 4

In bond 4, when the link goes down and up repeatedly, the bond may get an
unknown speed, and then this port can not work.

The driver notify netif_carrier_on() before update the link state, when the
bond receive carrier on, will query the speed of the port, if the query
operation happens before updating the link state, will get an unknown
speed. So need to notify netif_carrier_on() after update the link state.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: add waiting time before cmdq memory is released
Yufeng Mo [Thu, 26 Aug 2021 11:21:56 +0000 (19:21 +0800)]
net: hns3: add waiting time before cmdq memory is released

After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.

Fixes: 232d0d55fca6 ("net: hns3: uninitialize command queue while unloading PF driver")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hns3: clear hardware resource when loading driver
Yufeng Mo [Thu, 26 Aug 2021 11:21:55 +0000 (19:21 +0800)]
net: hns3: clear hardware resource when loading driver

If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agousb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running
Kyle Tso [Thu, 26 Aug 2021 12:42:01 +0000 (20:42 +0800)]
usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running

If the port is going to send Discover_Identity Message, vdm_sm_running
flag was intentionally set before entering Ready States in order to
avoid the conflict because the port and the port partner might start
AMS at almost the same time after entering Ready States.

However, the original design has a problem. When the port is doing
DR_SWAP from Device to Host, it raises the flag. Later in the
tcpm_send_discover_work, the flag blocks the procedure of sending the
Discover_Identity and it might never be cleared until disconnection.

Since there exists another flag send_discover representing that the port
is going to send Discover_Identity or not, it is enough to use that flag
to prevent the conflict. Also change the timing of the set/clear of
vdm_sm_running to indicate whether the VDM SM is actually running or
not.

Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work")
Cc: stable <stable@vger.kernel.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: renesas-xhci: Prefer firmware loading on unknown ROM state
Takashi Iwai [Thu, 26 Aug 2021 12:41:27 +0000 (14:41 +0200)]
usb: renesas-xhci: Prefer firmware loading on unknown ROM state

The recent attempt to handle an unknown ROM state in the commit
d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state")
resulted in a regression and reverted later by the commit 44cf53602f5a
("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"").
The problem of the former fix was that it treated the failure of
firmware loading as a fatal error.  Since the firmware files aren't
included in the standard linux-firmware tree, most users don't have
them, hence they got the non-working system after that.  The revert
fixed the regression, but also it didn't make the firmware loading
triggered even on the devices that do need it.  So we need still a fix
for them.

This is another attempt to handle the unknown ROM state.  Like the
previous fix, this also tries to load the firmware when ROM shows
unknown state.  In this patch, however, the failure of a firmware
loading (such as a missing firmware file) isn't handled as a fatal
error any longer when ROM has been already detected, but it falls back
to the ROM mode like before.  The error is returned only when no ROM
is detected and the firmware loading failed.

Along with it, for simplifying the code flow, the detection and the
check of ROM is factored out from renesas_fw_check_running() and done
in the caller side, renesas_xhci_check_request_fw().  It avoids the
redundant ROM checks.

The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34).  Also it
was confirmed that no regression is seen on another Thinkpad T14
machine that has worked without the patch, too.

Fixes: 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207
Link: https://lore.kernel.org/r/20210826124127.14789-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: dwc3: gadget: Stop EP0 transfers during pullup disable
Wesley Cheng [Wed, 25 Aug 2021 04:28:55 +0000 (21:28 -0700)]
usb: dwc3: gadget: Stop EP0 transfers during pullup disable

During a USB cable disconnect, or soft disconnect scenario, a pending
SETUP transaction may not be completed, leading to the following
error:

    dwc3 a600000.dwc3: timed out waiting for SETUP phase

If this occurs, then the entire pullup disable routine is skipped and
proper cleanup and halting of the controller does not complete.

Instead of returning an error (which is ignored from the UDC
perspective), allow the pullup disable routine to continue, which
will also handle disabling of EP0/1.  This will end any active
transfers as well.  Ensure to clear any delayed_status also, as the
timeout could happen within the STATUS stage.

Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so")
Cc: <stable@vger.kernel.org>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoMerge tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux into arm...
Arnd Bergmann [Mon, 23 Aug 2021 21:41:27 +0000 (23:41 +0200)]
Merge tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux into arm/fixes

Reset controller fixes for v5.14

Hide the Sparx5 reset driver unless the ARCH_SPARX5 or COMPILE_TEST
options are enabled, to avoid unnecessarily asking users about this
driver. Fix a return value argument type in the ZynqMP reset driver.

* tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux:
  reset: reset-zynqmp: Fixed the argument data type
  reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5

Link: https://lore.kernel.org/r/e543959c5b5ee7b25686f81049bf187d602daeda.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
3 years agousb: dwc3: gadget: Fix dwc3_calc_trbs_left()
Thinh Nguyen [Thu, 19 Aug 2021 01:17:03 +0000 (03:17 +0200)]
usb: dwc3: gadget: Fix dwc3_calc_trbs_left()

We can't depend on the TRB's HWO bit to determine if the TRB ring is
"full". A TRB is only available when the driver had processed it, not
when the controller consumed and relinquished the TRB's ownership to the
driver. Otherwise, the driver may overwrite unprocessed TRBs. This can
happen when many transfer events accumulate and the system is slow to
process them and/or when there are too many small requests.

If a request is in the started_list, that means there is one or more
unprocessed TRBs remained. Check this instead of the TRB's HWO bit
whether the TRB ring is full.

Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too")
Cc: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agodrm/i915/dp: Drop redundant debug print
Swati Sharma [Thu, 12 Aug 2021 13:11:07 +0000 (18:41 +0530)]
drm/i915/dp: Drop redundant debug print

drm_dp_dpcd_read/write already has debug error message.
Drop redundant error messages which gives false
status even if correct value is read in drm_dp_dpcd_read().

v2: -Added fixes tag (Ankit)
v3: -Fixed build error (CI)

Fixes: 9488a030ac91 ("drm/i915: Add support for enabling link status and recovery")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com
(cherry picked from commit b6dfa416172939edaa46a5a647457b94c6d94119)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Fix syncmap memory leak
Matthew Brost [Fri, 30 Jul 2021 19:53:42 +0000 (12:53 -0700)]
drm/i915: Fix syncmap memory leak

A small race exists between intel_gt_retire_requests_timeout and
intel_timeline_exit which could result in the syncmap not getting
free'd. Rather than work to hard to seal this race, simply cleanup the
syncmap on fini.

unreferenced object 0xffff88813bc53b18 (size 96):
  comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00  ................
    00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00  ........kkkk....
  backtrace:
    [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915]
    [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915]
    [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915]
    [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915]
    [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915]
    [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915]
    [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm]
    [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm]
    [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0
    [<0000000076c362a4>] do_syscall_64+0x33/0x80
    [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 531958f6f357 ("drm/i915/gt: Track timeline activeness in enter/exit")
Cc: <stable@vger.kernel.org>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730195342.110234-1-matthew.brost@intel.com
(cherry picked from commit faf890985e30d5e88cc3a7c50c1bcad32f89ab7c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agonet: fix NULL pointer reference in cipso_v4_doi_free
王贇 [Thu, 26 Aug 2021 03:42:42 +0000 (11:42 +0800)]
net: fix NULL pointer reference in cipso_v4_doi_free

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agortnetlink: Return correct error on changing device netns
Andrey Ignatov [Thu, 26 Aug 2021 00:25:40 +0000 (17:25 -0700)]
rtnetlink: Return correct error on changing device netns

Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.

Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.

Before:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: Invalid argument

After:

  # ./ifname.sh
  + ip netns add ns0
  + ip netns exec ns0 ip link add l0 type dummy
  + ip netns exec ns0 ip link show l0
  8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
  + ip link add l0 type dummy
  + ip link show l0
  10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
      link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
  + ip link set l0 netns ns0
  RTNETLINK answers: File exists

The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.

For example, __rtnl_newlink() does this:

net/core/rtnetlink.c
    3270 char ifname[IFNAMSIZ];
     ...
    3286 if (tb[IFLA_IFNAME])
    3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
    3288 else
    3289 ifname[0] = '\0';
     ...
    3364 if (dev) {
     ...
    3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status);
    3395 }

, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.

But the pat (pattern) in __dev_change_net_namespace() is used as:

net/core/dev.c
   11198 err = -EEXIST;
   11199 if (__dev_get_by_name(net, dev->name)) {
   11200 /* We get here if we can't use the current device name */
   11201 if (!pat)
   11202 goto out;
   11203 err = dev_get_valid_name(net, dev, pat);
   11204 if (err < 0)
   11205 goto out;
   11206 }

As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.

Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'dsa-hellcreek-fixes'
David S. Miller [Thu, 26 Aug 2021 09:26:06 +0000 (10:26 +0100)]
Merge branch 'dsa-hellcreek-fixes'

Kurt Kanzenbach says:

====================
net: dsa: hellcreek: 802.1Qbv Fixes

while using TAPRIO offloading on the Hirschmann hellcreek switch, I've noticed
two issues in the current implementation:

1. The gate control list is incorrectly programmed
2. The admin base time is not set properly

Fix it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: hellcreek: Adjust schedule look ahead window
Kurt Kanzenbach [Wed, 25 Aug 2021 13:58:13 +0000 (15:58 +0200)]
net: dsa: hellcreek: Adjust schedule look ahead window

Traffic schedules can only be started up to eight seconds within the
future. Therefore, the driver periodically checks every two seconds whether the
admin base time provided by the user is inside that window. If so the schedule
is started. Otherwise the check is deferred.

However, according to the programming manual the look ahead window size should
be four - not eight - seconds. By using the proposed value of four seconds
starting a schedule at a specified admin base time actually works as expected.

Fixes: 24dfc6eb39b2 ("net: dsa: hellcreek: Add TAPRIO offloading support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: hellcreek: Fix incorrect setting of GCL
Kurt Kanzenbach [Wed, 25 Aug 2021 13:58:12 +0000 (15:58 +0200)]
net: dsa: hellcreek: Fix incorrect setting of GCL

Currently the gate control list which is programmed into the hardware is
incorrect resulting in wrong traffic schedules. The problem is the loop
variables are incremented before they are referenced. Therefore, move the
increment to the end of the loop.

Fixes: 24dfc6eb39b2 ("net: dsa: hellcreek: Add TAPRIO offloading support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocxgb4: dont touch blocked freelist bitmap after free
Rahul Lakkireddy [Wed, 25 Aug 2021 21:29:42 +0000 (02:59 +0530)]
cxgb4: dont touch blocked freelist bitmap after free

When adapter init fails, the blocked freelist bitmap is already freed
up and should not be touched. So, move the bitmap zeroing closer to
where it was successfully allocated. Also handle adapter init failure
unwind path immediately and avoid setting up RDMA memory windows.

Fixes: 5b377d114f2b ("cxgb4: Add debugfs facility to inject FL starvation")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'inet-siphash'
David S. Miller [Thu, 26 Aug 2021 09:20:34 +0000 (10:20 +0100)]
Merge branch 'inet-siphash'

Eric Dumazet says:

====================
inet: use siphash in exception handling

A group of security researchers brought to our attention
the weakness of hash functions used in rt6_exception_hash()
and fnhe_hashfun()

I made two distinct patches to help backports, since IPv6
part was added in 4.15
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoipv4: use siphash instead of Jenkins in fnhe_hashfun()
Eric Dumazet [Wed, 25 Aug 2021 23:17:29 +0000 (16:17 -0700)]
ipv4: use siphash instead of Jenkins in fnhe_hashfun()

A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Also remove the inline keyword, this really is distracting.

Fixes: d546c621542d ("ipv4: harden fnhe_hashfun()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoipv6: use siphash in rt6_exception_hash()
Eric Dumazet [Wed, 25 Aug 2021 23:17:28 +0000 (16:17 -0700)]
ipv6: use siphash in rt6_exception_hash()

A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()

Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.

Following patch deals with IPv4.

Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Cc: Wei Wang <weiwan@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge tag 'linux-can-fixes-for-5.14-20210826' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Thu, 26 Aug 2021 08:37:40 +0000 (09:37 +0100)]
Merge tag 'linux-can-fixes-for-5.14-20210826' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine says:

====================
pull-request: can 2021-08-26

this is a pull request of a single patch for net/master.

Stefan Mätje's patch fixes the interchange of RX and TX error counters
inthe esd_usb2 CAN driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge tag 'usb-serial-5.14-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git...
Greg Kroah-Hartman [Thu, 26 Aug 2021 08:27:18 +0000 (10:27 +0200)]
Merge tag 'usb-serial-5.14-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.14-rc8

Here's a fix for a regression in 5.14 (also backported to stable) which
caused reads to stall for ch341 devices.

Included is also a new modem device id.

All but the revert have been in linux-next, and with no reported issues.

* tag 'usb-serial-5.14-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  Revert "USB: serial: ch341: fix character loss at high transfer rates"
  USB: serial: option: add new VID/PID to support Fibocom FG150

3 years agoperf/x86/amd/power: Assign pmu.module
Kim Phillips [Tue, 17 Aug 2021 22:10:43 +0000 (17:10 -0500)]
perf/x86/amd/power: Assign pmu.module

Assign pmu.module so the driver can't be unloaded whilst in use.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-4-kim.phillips@amd.com
3 years agoperf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op
Kim Phillips [Tue, 17 Aug 2021 22:10:41 +0000 (17:10 -0500)]
perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op

Commit:

   2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")

neglected to do so.

Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210817221048.88063-2-kim.phillips@amd.com
3 years agoperf/x86/amd/ibs: Work around erratum #1197
Kim Phillips [Tue, 17 Aug 2021 22:10:42 +0000 (17:10 -0500)]
perf/x86/amd/ibs: Work around erratum #1197

Erratum #1197 "IBS (Instruction Based Sampling) Register State May be
Incorrect After Restore From CC6" is published in a document:

  "Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021

  https://bugzilla.kernel.org/show_bug.cgi?id=206537

Implement the erratum's suggested workaround and ignore IBS samples if
MSRC001_1031 == 0.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210817221048.88063-3-kim.phillips@amd.com
3 years agoperf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32
Colin Ian King [Tue, 6 Jul 2021 11:45:53 +0000 (12:45 +0100)]
perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32

The u32 variable pci_dword is being masked with 0x1fffffff and then left
shifted 23 places. The shift is a u32 operation,so a value of 0x200 or
more in pci_dword will overflow the u32 and only the bottow 32 bits
are assigned to addr. I don't believe this was the original intent.
Fix this by casting pci_dword to a resource_size_t to ensure no
overflow occurs.

Note that the mask and 12 bit left shift operation does not need this
because the mask SNR_IMC_MMIO_MEM0_MASK and shift is always a 32 bit
value.

Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20210706114553.28249-1-colin.king@canonical.com
3 years agocan: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX...
Stefan Mätje [Wed, 25 Aug 2021 21:52:27 +0000 (23:52 +0200)]
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters

This patch fixes the interchanged fetch of the CAN RX and TX error
counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter
is really in struct rx_msg::data[2] and the TX error counter is in
struct rx_msg::data[3].

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agonet: usb: asix: ax88772: fix boolconv.cocci warnings
kernel test robot [Wed, 25 Aug 2021 18:35:38 +0000 (20:35 +0200)]
net: usb: asix: ax88772: fix boolconv.cocci warnings

drivers/net/usb/asix_devices.c:757:60-65: WARNING: conversion to bool not needed here

 Remove unneeded conversion to bool

Semantic patch information:
 Relational and logical operators evaluate to bool,
 explicit conversion is overly verbose and unneeded.

Generated by: scripts/coccinelle/misc/boolconv.cocci

Fixes: 7a141e64cf14 ("net: usb: asix: ax88772: move embedded PHY detection as early as possible")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210825183538.13070-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoSUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...
Trond Myklebust [Wed, 25 Aug 2021 19:33:14 +0000 (15:33 -0400)]
SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...

If the attempt to reserve a slot fails, we currently leak the XPT_BUSY
flag on the socket. Among other things, this make it impossible to close
the socket.

Fixes: 82011c80b3ec ("SUNRPC: Move svc_xprt_received() call sites")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
3 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Wed, 25 Aug 2021 19:45:31 +0000 (12:45 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm/memory-hotplug and
  MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: exfat: update my email address
  mm/memory_hotplug: fix potential permanent lru cache disable

3 years agoMAINTAINERS: exfat: update my email address
Namjae Jeon [Wed, 25 Aug 2021 19:17:58 +0000 (12:17 -0700)]
MAINTAINERS: exfat: update my email address

My email address in exfat entry will be not available in a few days.
Update it to my own kernel.org address.

Link: https://lkml.kernel.org/r/20210825044833.16806-1-namjae.jeon@samsung.com
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/memory_hotplug: fix potential permanent lru cache disable
Miaohe Lin [Wed, 25 Aug 2021 19:17:55 +0000 (12:17 -0700)]
mm/memory_hotplug: fix potential permanent lru cache disable

If offline_pages failed after lru_cache_disable(), it forgot to do
lru_cache_enable() in error path.  So we would have lru cache disabled
permanently in this case.

Link: https://lkml.kernel.org/r/20210821094246.10149-3-linmiaohe@huawei.com
Fixes: d479960e44f2 ("mm: disable LRU pagevec during the migration temporarily")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoPM: domains: Improve runtime PM performance state handling
Dmitry Osipenko [Mon, 23 Aug 2021 20:24:12 +0000 (23:24 +0300)]
PM: domains: Improve runtime PM performance state handling

GENPD core doesn't support handling performance state changes while
consumer device is runtime-suspended or when runtime PM is disabled.
GENPD core may override performance state that was configured by device
driver while RPM of the device was disabled or device was RPM-suspended.

Let's close that gap by allowing drivers to control performance state
while RPM of a consumer device is disabled and to set up performance
state of RPM-suspended device that will be applied by GENPD core on
RPM-resume of the device.

Fixes: 5937c3ce2122 ("PM: domains: Drop/restore performance state votes for devices at runtime PM")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
3 years agopipe: do FASYNC notifications for every pipe IO, not just state changes
Linus Torvalds [Tue, 24 Aug 2021 17:39:25 +0000 (10:39 -0700)]
pipe: do FASYNC notifications for every pipe IO, not just state changes

It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.

Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable).  User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.

But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).

The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.

This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong.  What matters is that it used to work.

So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes.  It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.

Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a66419 and 1b6b26ae7053 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed.  Probably because the stress-ng problem case ends up
being timing-dependent too.

It was then unwittingly fixed by commit 3a34b13a88ca ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").

And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case.  So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.

Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case.  FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.

Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoMerge branch 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...
Linus Torvalds [Wed, 25 Aug 2021 16:56:10 +0000 (09:56 -0700)]
Merge branch 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucount fixes from Eric Biederman:
 "This branch fixes a regression that made it impossible to increase
  rlimits that had been converted to the ucount infrastructure, and also
  fixes a reference counting bug where the reference was not incremented
  soon enough.

  The fixes are trivial and the bugs have been encountered in the wild,
  and the fixes have been tested"

* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Increase ucounts reference counter before the security hook
  ucounts: Fix regression preventing increasing of rlimits in init_user_ns

3 years agoceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
Tuo Li [Thu, 5 Aug 2021 15:14:34 +0000 (08:14 -0700)]
ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()

kcalloc() is called to allocate memory for m->m_info, and if it fails,
ceph_mdsmap_destroy() behind the label out_err will be called:
  ceph_mdsmap_destroy(m);

In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
  kfree(m->m_info[i].export_targets);

To fix this possible null-pointer dereference, check m->m_info before the
for loop to free m->m_info[i].export_targets.

[ jlayton: fix up whitespace damage
   only kfree(m->m_info) if it's non-NULL ]

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
3 years agoceph: correctly handle releasing an embedded cap flush
Xiubo Li [Wed, 18 Aug 2021 13:38:42 +0000 (21:38 +0800)]
ceph: correctly handle releasing an embedded cap flush

The ceph_cap_flush structures are usually dynamically allocated, but
the ceph_cap_snap has an embedded one.

When force umounting, the client will try to remove all the session
caps. During this, it will free them, but that should not be done
with the ones embedded in a capsnap.

Fix this by adding a new boolean that indicates that the cap flush is
embedded in a capsnap, and skip freeing it if that's set.

At the same time, switch to using list_del_init() when detaching the
i_list and g_list heads.  It's possible for a forced umount to remove
these objects but then handle_cap_flushsnap_ack() races in and does the
list_del_init() again, corrupting memory.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52283
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
3 years agoperf/x86/intel/pt: Fix mask of num_address_ranges
Xiaoyao Li [Tue, 24 Aug 2021 04:06:22 +0000 (12:06 +0800)]
perf/x86/intel/pt: Fix mask of num_address_ranges

Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.

Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
3 years agoRevert "btrfs: compression: don't try to compress if we don't have enough pages"
Qu Wenruo [Wed, 25 Aug 2021 05:41:42 +0000 (13:41 +0800)]
Revert "btrfs: compression: don't try to compress if we don't have enough pages"

This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.

[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").

[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.

- Compressed inline write
  The data is always smaller than one sector and the test lacks the
  condition to properly recognize a non-inline extent.

- Compressed subpage write
  For the incoming subpage compressed write support, we require page
  alignment of the delalloc range.
  And for 64K page size, we can compress just one page into smaller
  sectors.

For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback.  The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.

[FIX]
Fix it by reverting the offending commit.

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoPartially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"
Will Deacon [Wed, 25 Aug 2021 10:10:07 +0000 (11:10 +0100)]
Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"

This partially reverts commit 16c9afc776608324ca71c0bc354987bab532f51d.

Alex Bee reports a regression in 5.14 on their RK3328 SoC when
configuring the PL330 DMA controller:

 | ------------[ cut here ]------------
 | WARNING: CPU: 2 PID: 373 at kernel/dma/mapping.c:235 dma_map_resource+0x68/0xc0
 | Modules linked in: spi_rockchip(+) fuse
 | CPU: 2 PID: 373 Comm: systemd-udevd Not tainted 5.14.0-rc7 #1
 | Hardware name: Pine64 Rock64 (DT)
 | pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
 | pc : dma_map_resource+0x68/0xc0
 | lr : pl330_prep_slave_fifo+0x78/0xd0

This appears to be because dma_map_resource() is being called for a
physical address which does not correspond to a memory address yet does
have a valid 'struct page' due to the way in which the vmemmap is
constructed.

Prior to 16c9afc77660 ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), the arm64
implementation of pfn_valid() called memblock_is_memory() to return
'false' for such regions and the DMA mapping request would proceed.
However, now that we are using the generic implementation where only the
presence of the memory map entry is considered, we return 'true' and
erroneously fail with DMA_MAPPING_ERROR because we identify the region
as DRAM.

Although fixing this in the DMA mapping code is arguably the right fix,
it is a risky, cross-architecture change at this stage in the cycle. So
just revert arm64 back to its old pfn_valid() implementation for v5.14.
The change to the generic pfn_valid() code is preserved from the original
patch, so as to avoid impacting other architectures.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/d3a3c828-b777-faf8-e901-904995688437@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
3 years agonet/sched: ets: fix crash when flipping from 'strict' to 'quantum'
Davide Caratti [Tue, 24 Aug 2021 22:33:48 +0000 (00:33 +0200)]
net/sched: ets: fix crash when flipping from 'strict' to 'quantum'

While running kselftests, Hangbin observed that sch_ets.sh often crashes,
and splats like the following one are seen in the output of 'dmesg':

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0
 Oops: 0000 [#1] SMP NOPTI
 CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 RIP: 0010:__list_del_entry_valid+0x2d/0x50
 Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94
 RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217
 RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122
 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8
 RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001
 R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100
 R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002
 FS:  00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0
 Call Trace:
  ets_qdisc_reset+0x6e/0x100 [sch_ets]
  qdisc_reset+0x49/0x1d0
  tbf_reset+0x15/0x60 [sch_tbf]
  qdisc_reset+0x49/0x1d0
  dev_reset_queue.constprop.42+0x2f/0x90
  dev_deactivate_many+0x1d3/0x3d0
  dev_deactivate+0x56/0x90
  qdisc_graft+0x47e/0x5a0
  tc_get_qdisc+0x1db/0x3e0
  rtnetlink_rcv_msg+0x164/0x4c0
  netlink_rcv_skb+0x50/0x100
  netlink_unicast+0x1a5/0x280
  netlink_sendmsg+0x242/0x480
  sock_sendmsg+0x5b/0x60
  ____sys_sendmsg+0x1f2/0x260
  ___sys_sendmsg+0x7c/0xc0
  __sys_sendmsg+0x57/0xa0
  do_syscall_64+0x3a/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f93e44b8338
 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
 RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338
 RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003
 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000
 Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod
 CR2: 0000000000000000

When the change() function decreases the value of 'nstrict', we must take
into account that packets might be already enqueued on a class that flips
from 'strict' to 'quantum': otherwise that class will not be added to the
bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to
do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer
dereference.
For classes flipping from 'strict' to 'quantum', initialize an empty list
and eventually add it to the bandwidth-sharing list, if there are packets
already enqueued. In this way, the kernel will:
 a) prevent crashing as described above.
 b) avoid retaining the backlog packets (for an arbitrarily long time) in
    case no packet is enqueued after a change from 'strict' to 'quantum'.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqede: Fix memset corruption
Shai Malin [Tue, 24 Aug 2021 16:52:49 +0000 (19:52 +0300)]
qede: Fix memset corruption

Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
Song Yoong Siang [Wed, 25 Aug 2021 00:57:42 +0000 (08:57 +0800)]
net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp

Ensure a valid XSK buffer before proceed to free the xdp buffer.

The following kernel panic is observed without this patch:

RIP: 0010:xp_free+0x5/0x40
Call Trace:
stmmac_napi_poll_rxtx+0x332/0xb30 [stmmac]
? stmmac_tx_timer+0x3c/0xb0 [stmmac]
net_rx_action+0x13d/0x3d0
__do_softirq+0xfc/0x2fb
? smpboot_register_percpu_thread+0xe0/0xe0
run_ksoftirqd+0x32/0x70
smpboot_thread_fn+0x1d8/0x2c0
kthread+0x169/0x1a0
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
---[ end trace 0000000000000002 ]---

Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.13.x
Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: fix kernel panic due to NULL pointer dereference of xsk_pool
Song Yoong Siang [Wed, 25 Aug 2021 00:55:29 +0000 (08:55 +0800)]
net: stmmac: fix kernel panic due to NULL pointer dereference of xsk_pool

After free xsk_pool, there is possibility that napi polling is still
running in the middle, thus causes a kernel crash due to kernel NULL
pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool.

Fix this by changing the XDP pool setup sequence to:
 1. disable napi before free xsk_pool
 2. enable napi after init xsk_pool

The following kernel panic is observed without this patch:

RIP: 0010:xsk_uses_need_wakeup+0x5/0x10
Call Trace:
stmmac_napi_poll_rxtx+0x3a9/0xae0 [stmmac]
__napi_poll+0x27/0x130
net_rx_action+0x233/0x280
__do_softirq+0xe2/0x2b6
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xac/0x140
? sort_range+0x20/0x20
kthread+0x124/0x150
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
---[ end trace a77c8956b79ac107 ]---

Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: macb: Add a NULL check on desc_ptp
Harini Katakam [Tue, 24 Aug 2021 10:02:09 +0000 (15:32 +0530)]
net: macb: Add a NULL check on desc_ptp

macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings
Michael Riesch [Mon, 23 Aug 2021 14:37:54 +0000 (16:37 +0200)]
net: stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings

This reverts commit 2c896fb02e7f65299646f295a007bda043e0f382
"net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes
unbalanced pm_runtime_enable warnings.

In the commit to be reverted, support for power management was
introduced to the Rockchip glue code. Later, power management support
was introduced to the stmmac core code, resulting in multiple
invocations of pm_runtime_{enable,disable,get_sync,put_sync}.

The multiple invocations happen in rk_gmac_powerup and
stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and
stmmac_{dvr_remove, suspend}, respectively, which are always called
in conjunction.

Fixes: 5ec55823438e850c91c6b92aec93fb04ebde29e2 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoRevert "USB: serial: ch341: fix character loss at high transfer rates"
Johan Hovold [Tue, 24 Aug 2021 12:19:26 +0000 (14:19 +0200)]
Revert "USB: serial: ch341: fix character loss at high transfer rates"

This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b.

These devices do not appear to send a zero-length packet when the
transfer size is a multiple of the bulk-endpoint max-packet size. This
means that incoming data may not be processed by the driver until a
short packet is received or the receive buffer is full.

Revert back to using endpoint-sized receive buffers to avoid stalled
reads.

Reported-by: Paul Größel <pb.g@gmx.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131
Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates")
Cc: stable@vger.kernel.org
Cc: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
3 years agoriscv: dts: microchip: Add ethernet0 to the aliases node
Bin Meng [Wed, 4 Aug 2021 12:30:15 +0000 (20:30 +0800)]
riscv: dts: microchip: Add ethernet0 to the aliases node

U-Boot expects this alias to be in place in order to fix up the mac
address of the ethernet node.

Note on the Icicle Kit board, currently only emac1 is enabled so it
becomes the 'ethernet0'.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
3 years agoriscv: dts: microchip: Use 'local-mac-address' for emac1
Bin Meng [Wed, 4 Aug 2021 12:30:14 +0000 (20:30 +0800)]
riscv: dts: microchip: Use 'local-mac-address' for emac1

Per the DT spec, 'local-mac-address' is used to specify MAC address
that was assigned to the network device, while 'mac-address' is used
to specify the MAC address that was last used by the boot program,
and shall be used only if the value differs from 'local-mac-address'
property value.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: conor dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
3 years agoriscv: Ensure the value of FP registers in the core dump file is up to date
Vincent Chen [Tue, 3 Aug 2021 09:27:51 +0000 (17:27 +0800)]
riscv: Ensure the value of FP registers in the core dump file is up to date

The value of FP registers in the core dump file comes from the
thread.fstate. However, kernel saves the FP registers to the thread.fstate
only before scheduling out the process. If no process switch happens
during the exception handling process, kernel will not have a chance to
save the latest value of FP registers to thread.fstate. It will cause the
value of FP registers in the core dump file may be incorrect. To solve this
problem, this patch force lets kernel save the FP register into the
thread.fstate if the target task_struct equals the current.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: b8c8a9590e4f ("RISC-V: Add FP register ptrace support for gdb.")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
3 years agoscsi: core: Fix hang of freezing queue between blocking and running device
Li Jinlin [Tue, 24 Aug 2021 02:59:21 +0000 (10:59 +0800)]
scsi: core: Fix hang of freezing queue between blocking and running device

We found a hang, the steps to reproduce  are as follows:

  1. blocking device via scsi_device_set_state()

  2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10

  3. echo none > /sys/block/sda/queue/scheduler

  4. echo "running" >/sys/block/sda/device/state

Step 3 and 4 should complete after step 4, but they hang.

  CPU#0               CPU#1                CPU#2
  ---------------     ----------------     ----------------
                                           Step 1: blocking device

                                           Step 2: dd xxxx
                                                  ^^^^^^ get request
                                                         q_usage_counter++

                      Step 3: switching scheculer
                      elv_iosched_store
                        elevator_switch
                          blk_mq_freeze_queue
                            blk_freeze_queue
                              > blk_freeze_queue_start
                                ^^^^^^ mq_freeze_depth++

                              > blk_mq_run_hw_queues
                                ^^^^^^ can't run queue when dev blocked

                              > blk_mq_freeze_queue_wait
                                ^^^^^^ Hang here!!!
                                       wait q_usage_counter==0

  Step 4: running device
  store_state_field
    scsi_rescan_device
      scsi_attach_vpd
        scsi_vpd_inquiry
          __scsi_execute
            blk_get_request
              blk_mq_alloc_request
                blk_queue_enter
                ^^^^^^ Hang here!!!
                       wait mq_freeze_depth==0

    blk_mq_run_hw_queues
    ^^^^^^ dispatch IO, q_usage_counter will reduce to zero

                            blk_mq_unfreeze_queue
                            ^^^^^ mq_freeze_depth--

To fix this, we need to run queue before rescanning device when the device
state changes to SDEV_RUNNING.

Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Signed-off-by: Qiu Laibin <qiulaibin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
3 years agonet: phy: mediatek: add the missing suspend/resume callbacks
DENG Qingfang [Mon, 23 Aug 2021 04:44:21 +0000 (12:44 +0800)]
net: phy: mediatek: add the missing suspend/resume callbacks

Without suspend/resume callbacks, the PHY cannot be powered down/up
administratively.

Fixes: e40d2cca0189 ("net: phy: add MediaTek Gigabit Ethernet PHY driver")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210823044422.164184-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomq-deadline: Fix request accounting
Bart Van Assche [Tue, 24 Aug 2021 17:05:20 +0000 (10:05 -0700)]
mq-deadline: Fix request accounting

The block layer may call the I/O scheduler .finish_request() callback
without having called the .insert_requests() callback. Make sure that the
mq-deadline I/O statistics are correct if the block layer inserts an I/O
request that bypasses the I/O scheduler. This patch prevents that lower
priority I/O is delayed longer than necessary for mixed I/O priority
workloads.

Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210824170520.1659173-1-bvanassche@acm.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
3 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Linus Torvalds [Tue, 24 Aug 2021 16:55:50 +0000 (09:55 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Several small fixes, the first three are significant:

   - mlx5 crash unloading drivers with a rare HW config

   - missing userspace reporting for the new dmabuf objects

   - random rxe failure due to missing memory zeroing

   - static checker/etc reports: missing spin lock init, null pointer
     deref on error, extra unlock on error path, memory allocation under
     spinlock, missing IRQ vector cleanup

   - kconfig typo in the new irdma driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Zero out index member of struct rxe_queue
  RDMA/efa: Free IRQ vectors on error flow
  RDMA/rxe: Fix memory allocation while in a spin lock
  RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init()
  IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()
  RDMA/irdma: Use correct kconfig symbol for AUXILIARY_BUS
  RDMA/bnxt_re: Add missing spin lock initialization
  RDMA/uverbs: Track dmabuf memory regions
  RDMA/mlx5: Fix crash when unbind multiport slave

3 years agodrm/amdgpu: Fix build with missing pm_suspend_target_state module export
Borislav Petkov [Tue, 24 Aug 2021 09:42:47 +0000 (11:42 +0200)]
drm/amdgpu: Fix build with missing pm_suspend_target_state module export

Building a randconfig here triggered:

  ERROR: modpost: "pm_suspend_target_state" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

because the module export of that symbol happens in
kernel/power/suspend.c which is enabled with CONFIG_SUSPEND.

The ifdef guards in amdgpu_acpi_is_s0ix_supported(), however, test for
CONFIG_PM_SLEEP which is defined like this:

  config PM_SLEEP
          def_bool y
          depends on SUSPEND || HIBERNATE_CALLBACKS

and that randconfig has:

  # CONFIG_SUSPEND is not set
  CONFIG_HIBERNATE_CALLBACKS=y

leading to the module export missing.

Change the ifdeffery to depend directly on CONFIG_SUSPEND.

Fixes: 5706cb3c910c ("drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/YSP6Lv53QV0cOAsd@zn.tnic
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agoUSB: serial: option: add new VID/PID to support Fibocom FG150
Zhengjun Zhang [Mon, 9 Aug 2021 13:35:53 +0000 (21:35 +0800)]
USB: serial: option: add new VID/PID to support Fibocom FG150

Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform,
support Sub-6G band.

Here are the outputs of lsusb -v and usb-devices:

> T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
> D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
> P:  Vendor=2cb7 ProdID=010b Rev=04.14
> S:  Manufacturer=Fibocom
> S:  Product=Fibocom Modem_SN:XXXXXXXX
> S:  SerialNumber=XXXXXXXX
> C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
> I:  If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

> Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               3.20
>   bDeviceClass            0
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0         9
>   idVendor           0x2cb7 Fibocom
>   idProduct          0x010b
>   bcdDevice            4.14
>   iManufacturer           1 Fibocom
>   iProduct                2 Fibocom Modem_SN:XXXXXXXX
>   iSerial                 3 XXXXXXXX
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength       0x00e6
>     bNumInterfaces          5
>     bConfigurationValue     1
>     iConfiguration          4 RNDIS_DUN_DIAG_ADB
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              896mA
>     Interface Association:
>       bLength                 8
>       bDescriptorType        11
>       bFirstInterface         0
>       bInterfaceCount         2
>       bFunctionClass        239 Miscellaneous Device
>       bFunctionSubClass       4
>       bFunctionProtocol       1
>       iFunction               7 RNDIS
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           1
>       bInterfaceClass       239 Miscellaneous Device
>       bInterfaceSubClass      4
>       bInterfaceProtocol      1
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 01
>       ** UNRECOGNIZED:  04 24 02 00
>       ** UNRECOGNIZED:  05 24 06 00 01
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval               9
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        1
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass        10 CDC Data
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x8e  EP 14 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x0f  EP 15 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               6
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        2
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass      0
>       bInterfaceProtocol      0
>       iInterface              0
>       ** UNRECOGNIZED:  05 24 00 10 01
>       ** UNRECOGNIZED:  05 24 01 00 00
>       ** UNRECOGNIZED:  04 24 02 02
>       ** UNRECOGNIZED:  05 24 06 00 00
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x000a  1x 10 bytes
>         bInterval               9
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x82  EP 2 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x01  EP 1 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        3
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol     48
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x84  EP 4 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        4
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass     66
>       bInterfaceProtocol      1
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x03  EP 3 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x85  EP 5 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0400  1x 1024 bytes
>         bInterval               0
>         bMaxBurst               0
> Binary Object Store Descriptor:
>   bLength                 5
>   bDescriptorType        15
>   wTotalLength       0x0016
>   bNumDeviceCaps          2
>   USB 2.0 Extension Device Capability:
>     bLength                 7
>     bDescriptorType        16
>     bDevCapabilityType      2
>     bmAttributes   0x00000006
>       BESL Link Power Management (LPM) Supported
>   SuperSpeed USB Device Capability:
>     bLength                10
>     bDescriptorType        16
>     bDevCapabilityType      3
>     bmAttributes         0x00
>     wSpeedsSupported   0x000f
>       Device can operate at Low Speed (1Mbps)
>       Device can operate at Full Speed (12Mbps)
>       Device can operate at High Speed (480Mbps)
>       Device can operate at SuperSpeed (5Gbps)
>     bFunctionalitySupport   1
>       Lowest fully-functional device speed is Full Speed (12Mbps)
>     bU1DevExitLat           1 micro seconds
>     bU2DevExitLat         500 micro seconds
> Device Status:     0x0000
>   (Bus Powered)

Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
3 years agonet: dsa: mv88e6xxx: Update mv88e6393x serdes errata
Nathan Rossi [Tue, 24 Aug 2021 06:44:13 +0000 (06:44 +0000)]
net: dsa: mv88e6xxx: Update mv88e6393x serdes errata

In early erratas this issue only covered port 0 when changing from
[x]MII (rev A 3.6). In subsequent errata versions this errata changed to
cover the additional "Hardware reset in CPU managed mode" condition, and
removed the note specifying that it only applied to port 0.

In designs where the device is configured with CPU managed mode
(CPU_MGD), on reset all SERDES ports (p0, p9, p10) have a stuck power
down bit and require this initial power up procedure. As such apply this
errata to all three SERDES ports of the mv88e6393x.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoipv6: correct comments about fib6_node sernum
zhang kai [Mon, 23 Aug 2021 03:49:00 +0000 (11:49 +0800)]
ipv6: correct comments about fib6_node sernum

correct comments in set and get fn_sernum

Signed-off-by: zhang kai <zhangkaiheb@126.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqed: Fix the VF msix vectors flow
Shai Malin [Sun, 22 Aug 2021 19:21:14 +0000 (22:21 +0300)]
qed: Fix the VF msix vectors flow

For VFs we should return with an error in case we didn't get the exact
number of msix vectors as we requested.
Not doing that will lead to a crash when starting queues for this VF.

Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoucounts: Increase ucounts reference counter before the security hook
Alexey Gladkov [Mon, 23 Aug 2021 16:16:33 +0000 (18:16 +0200)]
ucounts: Increase ucounts reference counter before the security hook

We need to increment the ucounts reference counter befor security_prepare_creds()
because this function may fail and abort_creds() will try to decrement
this reference.

[   96.465056][ T8641] FAULT_INJECTION: forcing a failure.
[   96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0
[   96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0
[   96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[   96.497254][ T8641] Call Trace:
[   96.500517][ T8641]  dump_stack_lvl+0x1d3/0x29f
[   96.505758][ T8641]  ? show_regs_print_info+0x12/0x12
[   96.510944][ T8641]  ? log_buf_vmcoreinfo_setup+0x498/0x498
[   96.516652][ T8641]  should_fail+0x384/0x4b0
[   96.521141][ T8641]  prepare_alloc_pages+0x1d1/0x5a0
[   96.526236][ T8641]  __alloc_pages+0x14d/0x5f0
[   96.530808][ T8641]  ? __rmqueue_pcplist+0x2030/0x2030
[   96.536073][ T8641]  ? lockdep_hardirqs_on_prepare+0x3e2/0x750
[   96.542056][ T8641]  ? alloc_pages+0x3f3/0x500
[   96.546635][ T8641]  allocate_slab+0xf1/0x540
[   96.551120][ T8641]  ___slab_alloc+0x1cf/0x350
[   96.555689][ T8641]  ? kzalloc+0x1d/0x30
[   96.559740][ T8641]  __kmalloc+0x2e7/0x390
[   96.563980][ T8641]  ? kzalloc+0x1d/0x30
[   96.568029][ T8641]  kzalloc+0x1d/0x30
[   96.571903][ T8641]  security_prepare_creds+0x46/0x220
[   96.577174][ T8641]  prepare_creds+0x411/0x640
[   96.581747][ T8641]  __sys_setfsuid+0xe2/0x3a0
[   96.586333][ T8641]  do_syscall_64+0x3d/0xb0
[   96.590739][ T8641]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   96.596611][ T8641] RIP: 0033:0x445a69
[   96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[   96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a
[   96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69
[   96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000
[   96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000
[   96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc
[   96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000

Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred")
Reported-by: syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
3 years agoucounts: Fix regression preventing increasing of rlimits in init_user_ns
Eric W. Biederman [Mon, 23 Aug 2021 16:12:17 +0000 (11:12 -0500)]
ucounts: Fix regression preventing increasing of rlimits in init_user_ns

"Ma, XinjianX" <xinjianx.ma@intel.com> reported:

> When lkp team run kernel selftests, we found after these series of patches, testcase mqueue: mq_perf_tests
> in kselftest failed with following message.
>
> # selftests: mqueue: mq_perf_tests
> #
> # Initial system state:
> #       Using queue path:                       /mq_perf_tests
> #       RLIMIT_MSGQUEUE(soft):                  819200
> #       RLIMIT_MSGQUEUE(hard):                  819200
> #       Maximum Message Size:                   8192
> #       Maximum Queue Size:                     10
> #       Nice value:                             0
> #
> # Adjusted system state for testing:
> #       RLIMIT_MSGQUEUE(soft):                  (unlimited)
> #       RLIMIT_MSGQUEUE(hard):                  (unlimited)
> #       Maximum Message Size:                   16777216
> #       Maximum Queue Size:                     65530
> #       Nice value:                             -20
> #       Continuous mode:                        (disabled)
> #       CPUs to pin:                            3
> # ./mq_perf_tests: mq_open() at 296: Too many open files
> not ok 2 selftests: mqueue: mq_perf_tests # exit=1
> ```
>
> Test env:
> rootfs: debian-10
> gcc version: 9

After investigation the problem turned out to be that ucount_max for
the rlimits in init_user_ns was being set to the initial rlimit value.
The practical problem is that ucount_max provides a limit that
applications inside the user namespace can not exceed.  Which means in
practice that rlimits that have been converted to use the ucount
infrastructure were not able to exceend their initial rlimits.

Solve this by setting the relevant values of ucount_max to
RLIM_INIFINITY.  A limit in init_user_ns is pointless so the code
should allow the values to grow as large as possible without riscking
an underflow or an overflow.

As the ltp test case was a bit of a pain I have reproduced the rlimit failure
and tested the fix with the following little C program:
> #include <stdio.h>
> #include <fcntl.h>
> #include <sys/stat.h>
> #include <mqueue.h>
> #include <sys/time.h>
> #include <sys/resource.h>
> #include <errno.h>
> #include <string.h>
> #include <stdlib.h>
> #include <limits.h>
> #include <unistd.h>
>
> int main(int argc, char **argv)
> {
>  struct mq_attr mq_attr;
>  struct rlimit rlim;
>  mqd_t mqd;
>  int ret;
>
>  ret = getrlimit(RLIMIT_MSGQUEUE, &rlim);
>  if (ret != 0) {
>  fprintf(stderr, "getrlimit(RLIMIT_MSGQUEUE) failed: %s\n", strerror(errno));
>  exit(EXIT_FAILURE);
>  }
>  printf("RLIMIT_MSGQUEUE %lu %lu\n",
>         rlim.rlim_cur, rlim.rlim_max);
>  rlim.rlim_cur = RLIM_INFINITY;
>  rlim.rlim_max = RLIM_INFINITY;
>  ret = setrlimit(RLIMIT_MSGQUEUE, &rlim);
>  if (ret != 0) {
>  fprintf(stderr, "setrlimit(RLIMIT_MSGQUEUE, RLIM_INFINITY) failed: %s\n", strerror(errno));
>  exit(EXIT_FAILURE);
>  }
>
>  memset(&mq_attr, 0, sizeof(struct mq_attr));
>  mq_attr.mq_maxmsg = 65536 - 1;
>  mq_attr.mq_msgsize = 16*1024*1024 - 1;
>
>  mqd = mq_open("/mq_rlimit_test", O_RDONLY|O_CREAT, 0600, &mq_attr);
>  if (mqd == (mqd_t)-1) {
>  fprintf(stderr, "mq_open failed: %s\n", strerror(errno));
>  exit(EXIT_FAILURE);
>  }
>  ret = mq_close(mqd);
>  if (ret) {
>  fprintf(stderr, "mq_close failed; %s\n", strerror(errno));
>  exit(EXIT_FAILURE);
>  }
>
>  return EXIT_SUCCESS;
> }

Fixes: 6e52a9f0532f ("Reimplement RLIMIT_MSGQUEUE on top of ucounts")
Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Reported-by: kernel test robot lkp@intel.com
Acked-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/87eeajswfc.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
3 years agobpf: Fix ringbuf helper function compatibility
Daniel Borkmann [Mon, 23 Aug 2021 19:02:09 +0000 (21:02 +0200)]
bpf: Fix ringbuf helper function compatibility

Commit 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support
for it") extended check_map_func_compatibility() by enforcing map -> helper
function match, but not helper -> map type match.

Due to this all of the bpf_ringbuf_*() helper functions could be used with
a wrong map type such as array or hash map, leading to invalid access due
to type confusion.

Also, both BPF_FUNC_ringbuf_{submit,discard} have ARG_PTR_TO_ALLOC_MEM as
argument and not a BPF map. Therefore, their check_map_func_compatibility()
presence is incorrect since it's only for map type checking.

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Ryota Shiga (Flatt Security)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
3 years agoRevert "media: dvb header files: move some headers to staging"
Linus Torvalds [Mon, 23 Aug 2021 16:49:09 +0000 (09:49 -0700)]
Revert "media: dvb header files: move some headers to staging"

This reverts commit 819fbd3d8ef36c09576c2a0ffea503f5c46e9177.

It turns out that some user-space applications use these uapi header
files, so even though the only user of the interface is an old driver
that was moved to staging, moving the header files causes unnecessary
pain.

Generally, we really don't want user space to use kernel headers
directly (exactly because it causes pain when we re-organize), and
instead copy them as needed.  But these things happen, and the headers
were in the uapi directory, so I guess it's not entirely unreasonable.

Link: https://lore.kernel.org/lkml/4e3e0d40-df4a-94f8-7c2d-85010b0873c4@web.de/
Reported-by: Soeren Moch <smoch@web.de>
Cc: stable@kernel.org # 5.13
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>