Yang Yingliang [Tue, 18 Oct 2022 13:16:07 +0000 (21:16 +0800)]
wwan_hwsim: fix possible memory leak in wwan_hwsim_dev_new()
Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().
sfc: include vport_id in filter spec hash and equal()
Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.
Fixes: 202fa77b9269 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10") Co-developed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Missing flowi uid field in nft_fib expression, from Guillaume Nault.
This is broken since the creation of the fib expression.
2) Relax sanity check to fix bogus EINVAL error when deleting elements
belonging set intervals. Broken since 6.0-rc.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
====================
Jakub Kicinski [Tue, 18 Oct 2022 23:13:10 +0000 (16:13 -0700)]
genetlink: fix kdoc warnings
Address a bunch of kdoc warnings:
include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'
Paul Blakey [Tue, 18 Oct 2022 07:34:39 +0000 (10:34 +0300)]
selftests: add selftest for chaining of tc ingress handling to egress
This test runs a simple ingress tc setup between two veth pairs,
then adds a egress->ingress rule to test the chaining of tc ingress
pipeline to tc egress piepline.
Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Blakey [Tue, 18 Oct 2022 07:34:38 +0000 (10:34 +0300)]
net: Fix return value of qdisc ingress handling on success
Currently qdisc ingress handling (sch_handle_ingress()) doesn't
set a return value and it is left to the old return value of
the caller (__netif_receive_skb_core()) which is RX drop, so if
the packet is consumed, caller will stop and return this value
as if the packet was dropped.
This causes a problem in the kernel tcp stack when having a
egress tc rule forwarding to a ingress tc rule.
The tcp stack sending packets on the device having the egress rule
will see the packets as not successfully transmitted (although they
actually were), will not advance it's internal state of sent data,
and packets returning on such tcp stream will be dropped by the tcp
stack with reason ack-of-unsent-data. See reproduction in [0] below.
Fix that by setting the return value to RX success if
the packet was handled successfully.
[0] Reproduction steps:
$ ip link add veth1 type veth peer name peer1
$ ip link add veth2 type veth peer name peer2
$ ifconfig peer1 5.5.5.6/24 up
$ ip netns add ns0
$ ip link set dev peer2 netns ns0
$ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up
$ ifconfig veth2 0 up
$ ifconfig veth1 0 up
#ingress forwarding veth1 <-> veth2
$ tc qdisc add dev veth2 ingress
$ tc qdisc add dev veth1 ingress
$ tc filter add dev veth2 ingress prio 1 proto all flower \
action mirred egress redirect dev veth1
$ tc filter add dev veth1 ingress prio 1 proto all flower \
action mirred egress redirect dev veth2
#steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe
$ tc qdisc add dev peer1 clsact
$ tc filter add dev peer1 egress prio 20 proto ip flower \
action mirred ingress redirect dev veth1
#run iperf and see connection not running
$ iperf3 -s&
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1
#delete egress rule, and run again, now should work
$ tc filter del dev peer1 egress
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1
Fixes: 573f2e5f0837 ("[NET]: Avoid unnecessary cloning for ingress filtering") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 19 Oct 2022 12:47:09 +0000 (13:47 +0100)]
Merge branch 'qdisc-null-deref'
Zhengchao Shao says:
====================
net: fix null pointer access issue in qdisc
These three patches fix the same type of problem. Set the default qdisc,
and then construct an init failure scenario when the dev qdisc is
configured on mqprio to trigger the reset process. NULL pointer access
may occur during the reset process.
---
v2: for fq_codel, revert the patch
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the default qdisc is sfb, if the qdisc of dev_queue fails to be
inited during mqprio_init(), sfb_reset() is invoked to clear resources.
In this case, the q->qdisc is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
sfb_init()
tcf_block_get() --->failed, q->qdisc is NULL
...
qdisc_put()
...
sfb_reset()
qdisc_reset(q->qdisc) --->q->qdisc is NULL
ops = qdisc->ops
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:qdisc_reset+0x2b/0x6f0
Call Trace:
<TASK>
sfb_reset+0x37/0xd0
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f2164122d04
</TASK>
Fixes: e23ae3556fed ("net_sched: SFB flow scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be
inited during mqprio_init(), fq_codel_reset() is invoked to clear
resources. In this case, the flow is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
fq_codel_init()
...
q->flows_cnt = 1024;
...
q->flows = kvcalloc(...) --->failed, q->flows is NULL
...
qdisc_put()
...
fq_codel_reset()
...
flow = q->flows + i --->q->flows is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fq_codel_reset+0x14d/0x350
Call Trace:
<TASK>
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fd272b22d04
</TASK>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...) --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...] --->q->tins is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK>
Fixes: 106d5dd474da ("sched: Add Common Applications Kept Enhanced (cake) qdisc") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Thu, 13 Oct 2022 14:37:47 +0000 (16:37 +0200)]
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
Currently netfilter's rpfilter and fib modules implicitely initialise
->flowic_uid with 0. This is normally the root UID. However, this isn't
the case in user namespaces, where user ID 0 is mapped to a different
kernel UID. By initialising ->flowic_uid with sock_net_uid(), we get
the root UID of the user namespace, thus keeping the same behaviour
whether or not we're running in a user namepspace.
Note, this is similar to commit 2c60e25dfd8b ("ipv4: add missing
initialization for flowi4_uid"), which fixed the rp_filter sysctl.
Fixes: 8bf45a9d52d2 ("net: core: add UID to flows, rules, and routes") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Brett Creeley [Mon, 17 Oct 2022 23:31:23 +0000 (16:31 -0700)]
ionic: catch NULL pointer issue on reconfig
It's possible that the driver will dereference a qcq that doesn't exist
when calling ionic_reconfigure_queues(), which causes a page fault BUG.
If a reduction in the number of queues is followed by a different
reconfig such as changing the ring size, the driver can hit a NULL
pointer when trying to clean up non-existent queues.
Fix this by checking to make sure both the qcqs array and qcq entry
exists bofore trying to use and free the entry.
Fixes: 1845d6e81c61 ("ionic: change queue count with no reset") Signed-off-by: Brett Creeley <brett@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20221017233123.15869-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao [Mon, 17 Oct 2022 08:03:31 +0000 (16:03 +0800)]
ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed
If the initialization fails in calling addrconf_init_net(), devconf_all is
the pointer that has been released. Then ip6mr_sk_done() is called to
release the net, accessing devconf->mc_forwarding directly causes invalid
pointer access.
The process is as follows:
setup_net()
ops_init()
addrconf_init_net()
all = kmemdup(...) ---> alloc "all"
...
net->ipv6.devconf_all = all;
__addrconf_sysctl_register() ---> failed
...
kfree(all); ---> ipv6.devconf_all invalid
...
ops_exit_list()
...
ip6mr_sk_done()
devconf = net->ipv6.devconf_all;
//devconf is invalid pointer
if (!devconf || !atomic_read(&devconf->mc_forwarding))
The following is the Call Trace information:
BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0
Read of size 4 at addr ffff888075508e88 by task ip/14554
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
print_report+0x155/0x454
kasan_report+0xba/0x1f0
kasan_check_range+0x35/0x1b0
ip6mr_sk_done+0x112/0x3a0
rawv6_close+0x48/0x70
inet_release+0x109/0x230
inet6_release+0x4c/0x70
sock_release+0x87/0x1b0
igmp6_net_exit+0x6b/0x170
ops_exit_list+0xb0/0x170
setup_net+0x7ac/0xbd0
copy_net_ns+0x2e6/0x6b0
create_new_namespaces+0x382/0xa50
unshare_nsproxy_namespaces+0xa6/0x1c0
ksys_unshare+0x3a4/0x7e0
__x64_sys_unshare+0x2d/0x40
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f7963322547
udp: Update reuse->has_conns under reuseport_lock.
When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.
However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.
For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.
Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().
Jiapeng Chong [Mon, 17 Oct 2022 06:49:20 +0000 (14:49 +0800)]
net: ethernet: mediatek: ppe: Remove the unused function mtk_foe_entry_usable()
The function mtk_foe_entry_usable() is defined in the mtk_ppe.c file, but
not called elsewhere, so delete this unused function.
drivers/net/ethernet/mediatek/mtk_ppe.c:400:20: warning: unused function 'mtk_foe_entry_usable'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2409 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 17 Oct 2022 08:35:06 +0000 (09:35 +0100)]
Merge branch 'mtk_eth_wed-leak-fixes'
Yang Yingliang says:
====================
net: ethernet: mtk_eth_wed: fixe some leaks
I found some leaks in mtk_eth_soc.c/mtk_wed.c.
patch#1 - I found mtk_wed_exit() is never called, I think mtk_wed_exit() need
be called in error path or module remove function to free the memory
allocated in mtk_wed_add_hw().
patch#2 - The device is not put in error path in mtk_wed_add_hw().
patch#3 - The device_node pointer returned by of_parse_phandle() with refcount
incremented, it should be decreased when it done.
This patchset was just compiled tested because I don't have any HW on
which to do the actual tests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The device_node pointer returned by of_parse_phandle() with refcount
incremented, when finish using it, the refcount need be decreased.
Fixes: 7e7e0fcc79f5 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Mon, 17 Oct 2022 03:51:55 +0000 (11:51 +0800)]
net: ethernet: mtk_eth_wed: add missing put_device() in mtk_wed_add_hw()
After calling get_device() in mtk_wed_add_hw(), in error path, put_device()
needs be called.
Fixes: 7e7e0fcc79f5 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Mon, 17 Oct 2022 03:51:54 +0000 (11:51 +0800)]
net: ethernet: mtk_eth_soc: fix possible memory leak in mtk_probe()
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw().
Fixes: 7e7e0fcc79f5 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 9b849aa4a513 ("skmsg: Get rid of unncessary memset()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cong.wang@bytedance.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Per Russell's suggestion, the implementation is changed from the helper
function to add an extra property in phylink_config structure because this
change can easily cover SFP usecase too.
Changes in v6:
- update the fix tag hash and format
Changes in v5:
- Add fix tag in the commit message
Changes in v4:
- Clean up the codes in phylink.c
- Continue the version number
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Shenwei Wang [Fri, 14 Oct 2022 14:47:29 +0000 (09:47 -0500)]
net: stmmac: Enable mac_managed_pm phylink config
Enable the mac_managed_pm configuration in the phylink_config
structure to avoid the kernel warning during system resume.
Fixes: 4faafe4a276b ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shenwei Wang [Fri, 14 Oct 2022 14:47:28 +0000 (09:47 -0500)]
net: phylink: add mac_managed_pm in phylink_config structure
The recent commit
'commit 4faafe4a276b ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state")'
requires the MAC driver explicitly tell the phy driver who is
managing the PM, otherwise you will see warning during resume
stage.
Add a boolean property in the phylink_config structure so that
the MAC driver can use it to tell the PHY driver if it wants to
manage the PM.
Fixes: 4faafe4a276b ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 14 Oct 2022 15:08:39 +0000 (18:08 +0300)]
net: dsa: uninitialized variable in dsa_slave_netdevice_event()
Return zero if both dsa_slave_dev_check() and netdev_uses_dsa() are false.
Fixes: 6fd212f7c006 ("net: dsa: allow masters to join a LAG") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 14 Oct 2022 14:33:02 +0000 (17:33 +0300)]
sunhme: Uninitialized variable in happy_meal_init()
The "burst" string is only initialized for CONFIG_SPARC. It should be
set to "64" because that's what is used by PCI.
Fixes: a57b7460ae49 ("sunhme: Combine continued messages") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 14 Oct 2022 09:34:36 +0000 (12:34 +0300)]
net/smc: Fix an error code in smc_lgr_create()
If smc_wr_alloc_lgr_mem() fails then return an error code. Don't return
success.
Fixes: e79ff7378e2c ("net/smc: add v2 support to the work request layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Harini Katakam [Fri, 14 Oct 2022 06:47:35 +0000 (12:17 +0530)]
net: phy: dp83867: Extend RX strap quirk for SGMII mode
When RX strap in HW is not set to MODE 3 or 4, bit 7 and 8 in CF4
register should be set. The former is already handled in
dp83867_config_init; add the latter in SGMII specific initialization.
Fixes: 54dd27c45e57 ("net: phy: dp83867: Add TI dp83867 phy") Signed-off-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: A warning triggered when the response message len exceeds
the size of rndis_message. Inside the rndis_request structure
these fields are however followed by a RNDIS_EXT_LEN padding
so it is safe to use unsafe_memcpy.
Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Cooper [Thu, 13 Oct 2022 09:55:53 +0000 (10:55 +0100)]
sfc: Change VF mac via PF as first preference if available.
Changing a VF's mac address through the VF (rather than via the PF)
fails with EPERM because the latter part of efx_ef10_set_mac_address
attempts to change the vport mac address list as the VF.
Even with this fixed it still fails with EBUSY because the vadaptor
is still assigned on the VF - the vadaptor reassignment must be within
a section where the VF has torn down its state.
A major reason this has broken is because we have two functions that
ostensibly do the same thing - have a PF and VF cooperate to change a
VF mac address. Rather than do this, if we are changing the mac of a VF
that has a link to the PF in the same VM then simply call
sriov_set_vf_mac instead, which is a proven working function that does
that.
If there is no PF available, or that fails non-fatally, then attempt to
change the VF's mac address as we would a PF, without updating the PF's
data.
Test case:
Create a VF:
echo 1 > /sys/class/net/<if>/device/sriov_numvfs
Set the mac address of the VF directly:
ip link set <vf> addr 00:11:22:33:44:55
Set the MAC address of the VF via the PF:
ip link set <pf> vf 0 mac 00:11:22:33:44:66
Without this patch the last command will fail with ENOENT.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Reported-by: Íñigo Huguet <ihuguet@redhat.com> Fixes: 9bd49b83a9a2 ("set the MAC address using MC_CMD_VADAPTOR_SET_MAC") Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
zhangxiangqian [Thu, 13 Oct 2022 07:41:12 +0000 (15:41 +0800)]
net: macvlan: change schedule system_wq to system_unbound_wq
For FT2000+/64 devices,
when four virtual machines share the same physical network interface,
DROP will occur due to the single core CPU performance problem.
ip_check_defrag and macvlan_process_broadcast is on the same CPU.
When the MACVLAN PORT increases, the CPU usage reaches more than 90%.
bc_queue > bc_queue_len_used (default 1000), causing DROP.
Signed-off-by: zhangxiangqian <zhangxiangqian@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 12 Oct 2022 22:55:20 +0000 (15:55 -0700)]
tls: strp: make sure the TCP skbs do not have overlapping data
TLS tries to get away with using the TCP input queue directly.
This does not work if there is duplicated data (multiple skbs
holding bytes for the same seq number range due to retransmits).
Check for this condition and fall back to copy mode, it should
be rare.
Fixes: ae04dc969181 ("tls: rx: do not use the standard strparser") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler.
Fixes: ab81f2939a8a ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: qca8k: fix ethtool autocast mib for big-endian systems
The switch sends autocast mib in little-endian. This is problematic for
big-endian system as the values needs to be converted.
Fix this by converting each mib value to cpu byte order.
Fixes: 71e1366f72e5 ("net: dsa: qca8k: add support for mib autocast in Ethernet packet") Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: qca8k: fix inband mgmt for big-endian systems
The header and the data of the skb for the inband mgmt requires
to be in little-endian. This is problematic for big-endian system
as the mgmt header is written in the cpu byte order.
Fix this by converting each value for the mgmt header and data to
little-endian, and convert to cpu byte order the mgmt header and
data sent by the switch.
Fixes: 6f1bf00c8a2b ("net: dsa: qca8k: add support for mgmt read/write in Ethernet packet") Tested-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tipc: fix an information leak in tipc_topsrv_kern_subscr
Use a 8-byte write to initialize sub.usr_handle in
tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized
when issuing setsockopt(..., SOL_TIPC, ...).
This resulted in an infoleak reported by KMSAN when the packet was
received:
Local variable sub created at:
tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562
tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190
Bytes 84-87 of 88 are uninitialized
Memory access of size 88 starts at ffff88801ed57cd0
Data copied to user address 0000000020000400
...
=====================================================
Signed-off-by: Alexander Potapenko <glider@google.com> Fixes: de38a8cdce81fb ("tipc: rename tipc_server to tipc_topsrv") Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Tomlinson [Mon, 10 Oct 2022 02:46:13 +0000 (15:46 +1300)]
tipc: Fix recognition of trial period
The trial period exists until jiffies is after addr_trial_end. But as
jiffies will eventually overflow, just using time_after will eventually
give incorrect results. As the node address is set once the trial period
ends, this can be used to know that we are not in the trial period.
Fixes: 1e610648044f ("tipc: correct discovery message handling during address trial period") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
Linus Torvalds [Thu, 13 Oct 2022 17:36:57 +0000 (10:36 -0700)]
Merge tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Found that the synthetic events were using strlen/strscpy() on values
that could have come from userspace, and that is bad.
Consolidate the string logic of kprobe and eprobe and extend it to
the synthetic events to safely process string addresses.
- Clean up content of text dump in ftrace_bug() where the output does
not make char reads into signed and sign extending the byte output.
- Fix some kernel docs in the ring buffer code.
* tag 'trace-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix reading strings from synthetic events
tracing: Add "(fault)" name injection to kernel probes
tracing: Move duplicate code of trace_kprobe/eprobe.c into header
ring-buffer: Fix kernel-doc
ftrace: Fix char print issue in print_ip_ins()
Linus Torvalds [Thu, 13 Oct 2022 17:21:37 +0000 (10:21 -0700)]
Merge tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A quiet round this time: several assorted filesystem fixes, the most
noteworthy one being some additional wakeups in cap handling code, and
a messenger cleanup"
* tag 'ceph-for-6.1-rc1' of https://github.com/ceph/ceph-client:
ceph: remove Sage's git tree from documentation
ceph: fix incorrectly showing the .snap size for stat
ceph: fail the open_by_handle_at() if the dentry is being unlinked
ceph: increment i_version when doing a setattr with caps
ceph: Use kcalloc for allocating multiple elements
ceph: no need to wait for transition RDCACHE|RD -> RD
ceph: fail the request if the peer MDS doesn't support getvxattr op
ceph: wake up the waiters if any new caps comes
libceph: drop last_piece flag from ceph_msg_data_cursor
Linus Torvalds [Thu, 13 Oct 2022 16:58:42 +0000 (09:58 -0700)]
Merge tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add NFSv4.2 xattr tracepoints
- Replace xprtiod WQ in rpcrdma
- Flexfiles cancels I/O on layout recall or revoke
Bugfixes and Cleanups:
- Directly use ida_alloc() / ida_free()
- Don't open-code max_t()
- Prefer using strscpy over strlcpy
- Remove unused forward declarations
- Always return layout states on flexfiles layout return
- Have LISTXATTR treat NFS4ERR_NOXATTR as an empty reply instead of
error
- Allow more xprtrdma memory allocations to fail without triggering a
reclaim
- Various other xprtrdma clean ups
- Fix rpc_killall_tasks() races"
* tag 'nfs-for-6.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
NFSv4/flexfiles: Cancel I/O if the layout is recalled or revoked
SUNRPC: Add API to force the client to disconnect
SUNRPC: Add a helper to allow pNFS drivers to selectively cancel RPC calls
SUNRPC: Fix races with rpc_killall_tasks()
xprtrdma: Fix uninitialized variable
xprtrdma: Prevent memory allocations from driving a reclaim
xprtrdma: Memory allocation should be allowed to fail during connect
xprtrdma: MR-related memory allocation should be allowed to fail
xprtrdma: Clean up synopsis of rpcrdma_regbuf_alloc()
xprtrdma: Clean up synopsis of rpcrdma_req_create()
svcrdma: Clean up RPCRDMA_DEF_GFP
SUNRPC: Replace the use of the xprtiod WQ in rpcrdma
NFSv4.2: Add a tracepoint for listxattr
NFSv4.2: Add tracepoints for getxattr, setxattr, and removexattr
NFSv4.2: Move TRACE_DEFINE_ENUM(NFS4_CONTENT_*) under CONFIG_NFS_V4_2
NFSv4.2: Add special handling for LISTXATTR receiving NFS4ERR_NOXATTR
nfs: remove nfs_wait_atomic_killable() and nfs_write_prepare() declaration
NFSv4: remove nfs4_renewd_prepare_shutdown() declaration
fs/nfs/pnfs_nfs.c: fix spelling typo and syntax error in comment
NFSv4/pNFS: Always return layout stats on layout return for flexfiles
...
Dan Carpenter [Wed, 12 Oct 2022 15:01:32 +0000 (18:01 +0300)]
sunhme: fix an IS_ERR() vs NULL check in probe
The devm_request_region() function does not return error pointers, it
returns NULL on error.
Fixes: f000b42388b7 ("sunhme: switch to devres") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dan Carpenter [Wed, 12 Oct 2022 15:00:59 +0000 (18:00 +0300)]
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
The __prestera_nexthop_group_create() function returns NULL on error
and the prestera_nexthop_group_get() returns error pointers. Fix these
two checks.
Fixes: 9f73a926f0c8 ("net: marvell: prestera: Add router nexthops ABI") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 12 Oct 2022 13:34:12 +0000 (13:34 +0000)]
kcm: avoid potential race in kcm_tx_work
syzbot found that kcm_tx_work() could crash [1] in:
/* Primarily for SOCK_SEQPACKET sockets */
if (likely(sk->sk_socket) &&
test_bit(SOCK_NOSPACE, &sk->sk_socket->flags)) {
<<*>> clear_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
sk->sk_write_space(sk);
}
I think the reason is that another thread might concurrently
run in kcm_release() and call sock_orphan(sk) while sk is not
locked. kcm_tx_work() find sk->sk_socket being NULL.
[1]
BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:86 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in kcm_tx_work+0xff/0x160 net/kcm/kcmsock.c:742
Write of size 8 at addr 0000000000000008 by task kworker/u4:3/53
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
Eric Dumazet reported a use-after-free related to the per-netns ehash
series. [0]
When we create a TCP socket from userspace, the socket always holds a
refcnt of the netns. This guarantees that a reqsk timer is always fired
before netns dismantle. Each reqsk has a refcnt of its listener, so the
listener is not freed before the reqsk, and the net is not freed before
the listener as well.
OTOH, when in-kernel users create a TCP socket, it might not hold a refcnt
of its netns. Thus, a reqsk timer can be fired after the netns dismantle
and access freed per-netns ehash.
To avoid the use-after-free, we need to clean up TCP_NEW_SYN_RECV sockets
in inet_twsk_purge() if the netns uses a per-netns ehash.
BUG: KASAN: use-after-free in tcp_or_dccp_get_hashinfo
include/net/inet_hashtables.h:181 [inline]
BUG: KASAN: use-after-free in reqsk_queue_unlink+0x320/0x350
net/ipv4/inet_connection_sock.c:913
Read of size 8 at addr ffff88807545bd80 by task syz-executor.2/8301
commit ac5827224fa0 ("virtio_pci: don't try to use intxif pin is zero")
breaks virtio_pci on powerpc, when running as a qemu guest.
vp_find_vqs() bails out because pci_dev->pin == 0.
But pci_dev->irq is populated correctly, so vp_find_vqs_intx() would
succeed if we called it - which is what the code used to do.
This seems to happen because pci_dev->pin is not populated in
pci_assign_irq(). A PCI core bug? Maybe.
However Linus said:
I really think that that is basically the only time you should use
that 'pci_dev->pin' thing: it basically exists not for "does this
device have an IRQ", but for "what is the routing of this irq on this
device".
and
The correct way to check for "no irq" doesn't use NO_IRQ at all, it just does
if (dev->irq) ...
so let's just check irq and be done with it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: ac5827224fa0 ("virtio_pci: don't try to use intxif pin is zero") Cc: "Angus Chen" <angus.chen@jaguarmicro.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221012220312.308522-1-mst@redhat.com>
The issue was introduced by commit 21a776acfa1a ("openvswitch: Allow
attaching helper in later commit") where it somehow removed the check
of nf_ct_is_confirmed before asigning the helper. This patch is to fix
it by bringing it back.
Fixes: 21a776acfa1a ("openvswitch: Allow attaching helper in later commit") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Aaron Conole <aconole@redhat.com> Tested-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/c5c9092a22a2194650222bffaf786902613deb16.1665085502.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
tcp/udp: Fix memory leaks and data races around IPV6_ADDRFORM.
This series fixes some memory leaks and data races caused in the
same scenario where one thread converts an IPv6 socket into IPv4
with IPV6_ADDRFORM and another accesses the socket concurrently.
setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops
under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To
avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE()
for the reads and writes.
Thanks to Eric Dumazet for providing the syzbot report:
BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect
write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0:
tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240
__inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660
inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724
__sys_connect_file net/socket.c:1976 [inline]
__sys_connect+0x197/0x1b0 net/socket.c:1993
__do_sys_connect net/socket.c:2003 [inline]
__se_sys_connect net/socket.c:2000 [inline]
__x64_sys_connect+0x3d/0x50 net/socket.c:2000
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1:
tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585
__sys_setsockopt+0x212/0x2b0 net/socket.c:2252
__do_sys_setsockopt net/socket.c:2263 [inline]
__se_sys_setsockopt net/socket.c:2260 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2260
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8
Commit 049542f33ed4 ("ipv6: annotate some data-races around sk->sk_prot")
fixed some data-races around sk->sk_prot but it was not enough.
Some functions in inet6_(stream|dgram)_ops still access sk->sk_prot
without lock_sock() or rtnl_lock(), so they need READ_ONCE() to avoid
load tearing.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
Originally, inet6_sk(sk)->XXX were changed under lock_sock(), so we were
able to clean them up by calling inet6_destroy_sock() during the IPv6 ->
IPv4 conversion by IPV6_ADDRFORM. However, commit 3ebd25dabf27 ("udpv6:
Add lockless sendmsg() support") added a lockless memory allocation path,
which could cause a memory leak:
setsockopt(IPV6_ADDRFORM) sendmsg()
+-----------------------+ +-------+
- do_ipv6_setsockopt(sk, ...) - udpv6_sendmsg(sk, ...)
- sockopt_lock_sock(sk) ^._ called via udpv6_prot
- lock_sock(sk) before WRITE_ONCE()
- WRITE_ONCE(sk->sk_prot, &tcp_prot)
- inet6_destroy_sock() - if (!corkreq)
- sockopt_release_sock(sk) - ip6_make_skb(sk, ...)
- release_sock(sk) ^._ lockless fast path for
the non-corking case
- __ip6_append_data(sk, ...)
- ipv6_local_rxpmtu(sk, ...)
- xchg(&np->rxpmtu, skb)
^._ rxpmtu is never freed.
- goto out_no_dst;
- lock_sock(sk)
For now, rxpmtu is only the case, but not to miss the future change
and a similar bug fixed in commit d91e641693aa ("net: ping6: Fix
memleak in ipv6_renew_options()."), let's set a new function to IPv6
sk->sk_destruct() and call inet6_cleanup_sock() there. Since the
conversion does not change sk->sk_destruct(), we can guarantee that
we can clean up IPv6 resources finally.
We can now remove all inet6_destroy_sock() calls from IPv6 protocol
specific ->destroy() functions, but such changes are invasive to
backport. So they can be posted as a follow-up later for net-next.
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
Commit 7e5ed33083ff ("IPv6: Complete IPV6_DONTFRAG support") forgot
to add a change to free inet6_sk(sk)->rxpmtu while converting an IPv6
socket into IPv4 with IPV6_ADDRFORM. After conversion, sk_prot is
changed to udp_prot and ->destroy() never cleans it up, resulting in
a memory leak.
This is due to the discrepancy between inet6_destroy_sock() and
IPV6_ADDRFORM, so let's call inet6_destroy_sock() from IPV6_ADDRFORM
to remove the difference.
However, this is not enough for now because rxpmtu can be changed
without lock_sock() after commit 3ebd25dabf27 ("udpv6: Add lockless
sendmsg() support"). We will fix this case in the following patch.
Note we will rename inet6_destroy_sock() to inet6_cleanup_sock() and
remove unnecessary inet6_destroy_sock() calls in sk_prot->destroy()
in the future.
syzbot reported a memory leak [0] related to IPV6_ADDRFORM.
The scenario is that while one thread is converting an IPv6 socket into
IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and
allocates memory to inet6_sk(sk)->XXX after conversion.
Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources,
which inet6_destroy_sock() should have cleaned up.
setsockopt(IPV6_ADDRFORM) setsockopt(IPV6_DSTOPTS)
+-----------------------+ +----------------------+
- do_ipv6_setsockopt(sk, ...)
- sockopt_lock_sock(sk) - do_ipv6_setsockopt(sk, ...)
- lock_sock(sk) ^._ called via tcpv6_prot
- WRITE_ONCE(sk->sk_prot, &tcp_prot) before WRITE_ONCE()
- xchg(&np->opt, NULL)
- txopt_put(opt)
- sockopt_release_sock(sk)
- release_sock(sk) - sockopt_lock_sock(sk)
- lock_sock(sk)
- ipv6_set_opt_hdr(sk, ...)
- ipv6_update_options(sk, opt)
- xchg(&inet6_sk(sk)->opt, opt)
^._ opt is never freed.
- sockopt_release_sock(sk)
- release_sock(sk)
Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this
memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after
acquiring the lock.
This issue exists from the initial commit between IPV6_ADDRFORM and
IPV6_PKTOPTIONS.
Linus Torvalds [Wed, 12 Oct 2022 22:01:58 +0000 (15:01 -0700)]
Merge tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more KUnit updates from Shuah Khan:
"Features and fixes:
- simplify resource use
- make kunit_malloc() and kunit_free() allocations and frees
consistent. kunit_free() frees only the memory allocated by
kunit_malloc()
- stop downloading risc-v opensbi binaries using wget
- other fixes and improvements to tool and KUnit framework"
* tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Update description of --alltests option
kunit: declare kunit_assert structs as const
kunit: rename base KUNIT_ASSERTION macro to _KUNIT_FAILED
kunit: remove format func from struct kunit_assert, get it to 0 bytes
kunit: tool: Don't download risc-v opensbi firmware with wget
kunit: make kunit_kfree(NULL) a no-op to match kfree()
kunit: make kunit_kfree() not segfault on invalid inputs
kunit: make kunit_kfree() only work on pointers from kunit_malloc() and friends
kunit: drop test pointer in string_stream_fragment
kunit: string-stream: Simplify resource use
Linus Torvalds [Wed, 12 Oct 2022 21:59:13 +0000 (14:59 -0700)]
Merge tag 'linux-kselftest-next-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more Kselftest updates from Shuah Khan:
"This consists of fixes and improvements to memory-hotplug test and a
minor spelling fix to ftrace test"
* tag 'linux-kselftest-next-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs: notifier-error-inject: Correct test's name
selftests/memory-hotplug: Adjust log info for maintainability
selftests/memory-hotplug: Restore memory before exit
selftests/memory-hotplug: Add checking after online or offline
selftests/ftrace: func_event_triggers: fix typo in user message
Linus Torvalds [Wed, 12 Oct 2022 21:46:48 +0000 (14:46 -0700)]
Merge tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Prune private items from vfio_pci_core.h to a new internal header,
fix missed function rename, and refactor vfio-pci interrupt defines
(Jason Gunthorpe)
- Create consistent naming and handling of ioctls with a function per
ioctl for vfio-pci and vfio group handling, use proper type args
where available (Jason Gunthorpe)
- Implement a set of low power device feature ioctls allowing userspace
to make use of power states such as D3cold where supported (Abhishek
Sahu)
- Remove device counter on vfio groups, which had restricted the page
pinning interface to singleton groups to account for limitations in
the type1 IOMMU backend. Document usage as limited to emulated IOMMU
devices, ie. traditional mdev devices where this restriction is
consistent (Jason Gunthorpe)
- Correct function prefix in hisi_acc driver incurred during previous
refactoring (Shameer Kolothum)
- Correct typo and remove redundant warning triggers in vfio-fsl driver
(Christophe JAILLET)
- Introduce device level DMA dirty tracking uAPI and implementation in
the mlx5 variant driver (Yishai Hadas & Joao Martins)
- Move much of the vfio_device life cycle management into vfio core,
simplifying and avoiding duplication across drivers. This also
facilitates adding a struct device to vfio_device which begins the
introduction of device rather than group level user support and fills
a gap allowing userspace identify devices as vfio capable without
implicit knowledge of the driver (Kevin Tian & Yi Liu)
- Split vfio container handling to a separate file, creating a more
well defined API between the core and container code, masking IOMMU
backend implementation from the core, allowing for an easier future
transition to an iommufd based implementation of the same (Jason
Gunthorpe)
- Attempt to resolve race accessing the iommu_group for a device
between vfio releasing DMA ownership and removal of the device from
the IOMMU driver. Follow-up with support to allow vfio_group to exist
with NULL iommu_group pointer to support existing userspace use cases
of holding the group file open (Jason Gunthorpe)
- Fix error code and hi/lo register manipulation issues in the hisi_acc
variant driver, along with various code cleanups (Longfang Liu)
- Fix a prior regression in GVT-g group teardown, resulting in
unreleased resources (Jason Gunthorpe)
- A significant cleanup and simplification of the mdev interface,
consolidating much of the open coded per driver sysfs interface
support into the mdev core (Christoph Hellwig)
- Simplification of tracking and locking around vfio_groups that fall
out from previous refactoring (Jason Gunthorpe)
- Replace trivial open coded f_ops tests with new helper (Alex
Williamson)
* tag 'vfio-v6.1-rc1' of https://github.com/awilliam/linux-vfio: (77 commits)
vfio: More vfio_file_is_group() use cases
vfio: Make the group FD disassociate from the iommu_group
vfio: Hold a reference to the iommu_group in kvm for SPAPR
vfio: Add vfio_file_is_group()
vfio: Change vfio_group->group_rwsem to a mutex
vfio: Remove the vfio_group->users and users_comp
vfio/mdev: add mdev available instance checking to the core
vfio/mdev: consolidate all the description sysfs into the core code
vfio/mdev: consolidate all the available_instance sysfs into the core code
vfio/mdev: consolidate all the name sysfs into the core code
vfio/mdev: consolidate all the device_api sysfs into the core code
vfio/mdev: remove mtype_get_parent_dev
vfio/mdev: remove mdev_parent_dev
vfio/mdev: unexport mdev_bus_type
vfio/mdev: remove mdev_from_dev
vfio/mdev: simplify mdev_type handling
vfio/mdev: embedd struct mdev_parent in the parent data structure
vfio/mdev: make mdev.h standalone includable
drm/i915/gvt: simplify vgpu configuration management
drm/i915/gvt: fix a memory leak in intel_gvt_init_vgpu_types
...
Linus Torvalds [Wed, 12 Oct 2022 18:16:58 +0000 (11:16 -0700)]
Merge tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Five hotfixes - three for nilfs2, two for MM. For are cc:stable, one
is not"
* tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix leak of nilfs_root in case of writer thread creation failure
nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
nilfs2: fix use-after-free bug of struct nilfs_root
mm/damon/core: initialize damon_target->list in damon_new_target()
mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page
Linus Torvalds [Wed, 12 Oct 2022 18:00:22 +0000 (11:00 -0700)]
Merge tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
The problem is that the synthetic event field "char file[]" will read
the value given to it as a string without any memory checks to make sure
the address is valid. The above example will pass in the user space
address and the sythetic event code will happily call strlen() on it
and then strscpy() where either one will cause an oops when accessing
user space addresses.
Use the helper functions from trace_kprobe and trace_eprobe that can
read strings safely (and actually succeed when the address is from user
space and the memory is mapped in).
tracing: Add "(fault)" name injection to kernel probes
Have the specific functions for kernel probes that read strings to inject
the "(fault)" name directly. trace_probes.c does this too (for uprobes)
but as the code to read strings are going to be used by synthetic events
(and perhaps other utilities), it simplifies the code by making sure those
other uses do not need to implement the "(fault)" name injection as well.
Link: https://lkml.kernel.org/r/20221012104534.644803645@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: 8788697514a56 ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
are identical in both trace_kprobe.c and trace_eprobe.c. Move them into
a new header file trace_probe_kernel.h to share it. This code will later
be used by the synthetic events as well.
Marked for stable as a fix for a crash in synthetic events requires it.
Link: https://lkml.kernel.org/r/20221012104534.467668078@goodmis.org Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tom Zanussi <zanussi@kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Fixes: 8788697514a56 ("tracing: Add support for dynamic strings to synthetic events") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Wed, 12 Oct 2022 17:35:20 +0000 (10:35 -0700)]
Merge tag 'loongarch-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Use EXPLICIT_RELOCS (ABIv2.0)
- Use generic BUG() handler
- Refactor TLB/Cache operations
- Add qspinlock support
- Add perf events support
- Add kexec/kdump support
- Add BPF JIT support
- Add ACPI-based laptop driver
- Update the default config file
* tag 'loongarch-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add ACPI-based generic laptop driver
LoongArch: Add BPF JIT support
LoongArch: Add some instruction opcodes and formats
LoongArch: Move {signed,unsigned}_imm_check() to inst.h
LoongArch: Add kdump support
LoongArch: Add kexec support
LoongArch: Use generic BUG() handler
LoongArch: Add SysRq-x (TLB Dump) support
LoongArch: Add perf events support
LoongArch: Add qspinlock support
LoongArch: Use TLB for ioremap()
LoongArch: Support access filter to /dev/mem interface
LoongArch: Refactor cache probe and flush methods
LoongArch: mm: Refactor TLB exception handlers
LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules
LoongArch: Support PC-relative relocations in modules
LoongArch: Define ELF relocation types added in ABIv2.0
LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS
LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCS
...
Linus Torvalds [Wed, 12 Oct 2022 17:23:24 +0000 (10:23 -0700)]
Merge tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core code:
- Provide a generic wrapper which can be utilized in drivers to
handle the problem of force threaded demultiplex interrupts on RT
enabled kernels. This avoids conditionals and horrible quirks in
drivers all over the place
- Fix up affected pinctrl and GPIO drivers to make them cleanly RT
safe
Interrupt drivers:
- A new driver for the FSL MU platform specific MSI implementation
- Make irqchip_init() available for pure ACPI based systems
- Provide a functional DT binding for the Realtek RTL interrupt chip
- The usual DT updates and small code improvements all over the
place"
* tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip: IMX_MU_MSI should depend on ARCH_MXC
irqchip/imx-mu-msi: Fix wrong register offset for 8ulp
irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap
dt-bindings: irqchip: Describe the IMX MU block as a MSI controller
irqchip: Add IMX MU MSI controller driver
dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support
irqchip/gic-v3: Fix typo in comment
dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding
dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells
irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END
platform-msi: Export symbol platform_msi_create_irq_domain()
irqchip/realtek-rtl: use parent interrupts
dt-bindings: interrupt-controller: realtek,rtl-intc: require parents
irqchip/realtek-rtl: use irq_domain_add_linear()
irqchip: Make irqchip_init() usable on pure ACPI systems
bcma: gpio: Use generic_handle_irq_safe()
gpio: mlxbf2: Use generic_handle_irq_safe()
platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe()
ssb: gpio: Use generic_handle_irq_safe()
pinctrl: amd: Use generic_handle_irq_safe()
...
Jiapeng Chong [Sun, 9 Oct 2022 02:06:42 +0000 (10:06 +0800)]
ring-buffer: Fix kernel-doc
kernel/trace/ring_buffer.c:895: warning: expecting prototype for ring_buffer_nr_pages_dirty(). Prototype was for ring_buffer_nr_dirty_pages() instead.
kernel/trace/ring_buffer.c:5313: warning: expecting prototype for ring_buffer_reset_cpu(). Prototype was for ring_buffer_reset_online_cpus() instead.
kernel/trace/ring_buffer.c:5382: warning: expecting prototype for rind_buffer_empty(). Prototype was for ring_buffer_empty() instead.
Jeremy Kerr [Wed, 12 Oct 2022 02:08:51 +0000 (10:08 +0800)]
mctp: prevent double key removal and unref
Currently, we have a bug where a simultaneous DROPTAG ioctl and socket
close may race, as we attempt to remove a key from lists twice, and
perform an unref for each removal operation. This may result in a uaf
when we attempt the second unref.
This change fixes the race by making __mctp_key_remove tolerant to being
called on a key that has already been removed from the socket/net lists,
and only performs the unref when we do the actual remove. We also need
to hold the list lock on the ioctl cleanup path.
This fix is based on a bug report and comprehensive analysis from
butt3rflyh4ck <butterflyhuangxx@gmail.com>, found via syzkaller.
Cc: stable@vger.kernel.org Fixes: bf2078784326 ("mctp: Add SIOCMCTP{ALLOC,DROP}TAG ioctls for tag control") Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 12 Oct 2022 12:29:07 +0000 (13:29 +0100)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter fixes for net
This series from Phil Sutter for the *net* tree fixes a problem with a change
from the 6.1 development phase: the change to nft_fib should have used
the more recent flowic_l3mdev field. Pointed out by Guillaume Nault.
This also makes the older iptables module follow the same pattern.
Also add selftest case and avoid test failure in nft_fib.sh when the
host environment has set rp_filter=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter [Wed, 5 Oct 2022 15:34:36 +0000 (17:34 +0200)]
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
If net.ipv4.conf.all.rp_filter is set, it overrides the per-interface
setting and thus defeats the fix from aa1e4da7c6fc5 ("selftests:
netfilter: disable rp_filter on router"). Unset it as well to cover that
case.
Fixes: aa1e4da7c6fc5 ("selftests: netfilter: disable rp_filter on router") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Florian Westphal <fw@strlen.de>
Phil Sutter [Wed, 5 Oct 2022 16:07:05 +0000 (18:07 +0200)]
netfilter: rpfilter/fib: Populate flowic_l3mdev field
Use the introduced field for correct operation with VRF devices instead
of conditionally overwriting flowic_oif. This is a partial revert of
commit 07980f538cd5d ("netfilter: Fix rpfilter dropping vrf packets by
mistake"), implementing a simpler solution.
Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de>
Zheng Yejian [Tue, 11 Oct 2022 12:03:52 +0000 (12:03 +0000)]
ftrace: Fix char print issue in print_ip_ins()
When ftrace bug happened, following log shows every hex data in
problematic ip address:
actual: ffffffe8:6b:ffffffd9:01:21
But so many 'f's seem a little confusing, and that is because format
'%x' being used to print signed chars in array 'ins'. As suggested
by Joe, change to use format "%*phC" to print array 'ins'.
After this patch, the log is like:
actual: e8:6b:d9:01:21
Link: https://lkml.kernel.org/r/20221011120352.1878494-1-zhengyejian1@huawei.com Fixes: a2df1ca473ad ("ftrace: Do not blindly read the ip address in ftrace_bug()") Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Huacai Chen [Wed, 12 Oct 2022 08:36:23 +0000 (16:36 +0800)]
LoongArch: Update Loongson-3 default config file
1, Enable ZBOOT, KEXEC and BPF_JIT;
2, Add more patition types;
3, Add some USB Type-C options;
4, Add some common network options;
5, Add some Bluetooth device drivers;
6, Remove obsolete config options (for some detailed information, see
Link).
Tiezhu Yang [Wed, 12 Oct 2022 08:36:20 +0000 (16:36 +0800)]
LoongArch: Add BPF JIT support
BPF programs are normally handled by a BPF interpreter, add BPF JIT
support for LoongArch to allow the kernel to generate native code when
a program is loaded into the kernel. This will significantly speed-up
processing of BPF programs.
Tiezhu Yang [Wed, 12 Oct 2022 08:36:19 +0000 (16:36 +0800)]
LoongArch: Add some instruction opcodes and formats
According to the "Table of Instruction Encoding" in LoongArch Reference
Manual [1], add some instruction opcodes and formats which are used in
the BPF JIT for LoongArch.
Youling Tang [Wed, 12 Oct 2022 08:36:19 +0000 (16:36 +0800)]
LoongArch: Add kdump support
This patch adds support for kdump. In kdump case the normal kernel will
reserve a region for the crash kernel and jump there on panic.
Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.
A user-space tool, such as kexec-tools, is responsible for allocating a
separate region for the core's ELF header within the crash kdump kernel
memory and filling it in when executing kexec_load().
Then, its location will be advertised to the crash dump kernel via a
command line argument "elfcorehdr=", and the crash dump kernel will
preserve this region for later use with arch_reserve_vmcore() at boot
time.
At the same time, the crash kdump kernel is also limited within the
"crashkernel" area via a command line argument "mem=", so as not to
destroy the original kernel dump data.
In the crash dump kernel environment, /proc/vmcore is used to access the
primary kernel's memory with copy_oldmem_page().
I tested kdump on LoongArch machines (Loongson-3A5000) and it works as
expected (suggested crashkernel parameter is "crashkernel=512M@2560M"),
you may test it by triggering a crash through /proc/sysrq-trigger:
Youling Tang [Wed, 12 Oct 2022 08:36:19 +0000 (16:36 +0800)]
LoongArch: Add kexec support
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to
the LoongArch architecture, so as to add support for the kexec re-boot
mechanism (CONFIG_KEXEC) on LoongArch platforms.
Kexec supports loading vmlinux.elf in ELF format and vmlinux.efi in PE
format.
I tested kexec on LoongArch machines (Loongson-3A5000) and it works as
expected:
Youling Tang [Wed, 12 Oct 2022 08:36:19 +0000 (16:36 +0800)]
LoongArch: Use generic BUG() handler
Inspired by commit ad73fc679a9("arm64/BUG: Use BRK instruction for
generic BUG traps"), do similar for LoongArch to use generic BUG()
handler.
This patch uses the BREAK software breakpoint instruction to generate
a trap instead, similarly to most other arches, with the generic BUG
code generating the dmesg boilerplate.
This allows bug metadata to be moved to a separate table and reduces
the amount of inline code at BUG() and WARN() sites. This also avoids
clobbering any registers before they can be dumped.
To mitigate the size of the bug table further, this patch makes use of
the existing infrastructure for encoding addresses within the bug table
as 32-bit relative pointers instead of absolute pointers.
(Note: this limits the max kernel size to 2GB.)
Before patch:
[ 3018.338013] lkdtm: Performing direct entry BUG
[ 3018.342445] Kernel bug detected[#5]:
[ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35
After patch:
[ 125.585985] lkdtm: Performing direct entry BUG
[ 125.590433] ------------[ cut here ]------------
[ 125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78!
[ 125.600211] Oops - BUG[#1]:
[ 125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36
Out-of-line file/line data information obtained compared to before.
Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Add qspinlock support
On NUMA system, the performance of qspinlock is better than generic
spinlock. Below is the UnixBench test results on a 8 nodes (4 cores
per node, 32 cores in total) machine.
Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Use TLB for ioremap()
We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.
The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.
We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.
Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Support access filter to /dev/mem interface
Accidental access to /dev/mem is obviously disastrous, but specific
access can be used by people debugging the kernel. So select GENERIC_
LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE
and related helpers, to support access filter to /dev/mem interface.
Signed-off-by: Weihao Li <liweihao@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Refactor cache probe and flush methods
Current cache probe and flush methods have some drawbacks:
1, Assume there are 3 cache levels and only 3 levels;
2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive.
However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are
all valid. So, refactor the cache probe and flush methods to adapt more
types of cache hierarchy.
projects / kernel.git / log