vmcore: convert copy_oldmem_page() to take an iov_iter
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Jakob Koschel [Fri, 29 Apr 2022 21:37:59 +0000 (14:37 -0700)]
fs/proc/kcore.c: remove check of list iterator against head past the loop body
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed based
on the head element, either with list_entry_is_head() or &pos->member ==
head, using the iterator variable after the loop should be avoided.
In preparation to limit the scope of a list iterator to the list traversal
loop, use a dedicated pointer to point to the found element [1].
Current ocfs2_fill_super() uses one goto label "read_super_error" to
handle all error cases. And with previous serial patches, the error
handling should fork more branches to handle different error cases. This
patch rewrite the error handling of ocfs2_fill_super.
Link: https://lkml.kernel.org/r/20220424130952.2436-6-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: ocfs2_mount_volume does cleanup job before return error
After this patch, when error, ocfs2_fill_super doesn't take care to
release resources which are allocated in ocfs2_mount_volume.
Link: https://lkml.kernel.org/r/20220424130952.2436-5-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ocfs2: ocfs2_initialize_super does cleanup job before return error
After this patch, when error, ocfs2_fill_super doesn't take care to
release resources which are allocated in ocfs2_initialize_super.
Link: https://lkml.kernel.org/r/20220424130952.2436-4-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since ocfs2_resmap_init() always return 0, change it to void.
Link: https://lkml.kernel.org/r/20220424130952.2436-3-heming.zhao@suse.com Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For avoiding kernel crash, this make sense for us. We only
concerned whether there has any non-system inode access before dlm
init. The answer is NO. And all journal replay/recovery handling
happen after dlm & journal init done. So this method is not graceful
but workable.
2> Add osb->journal check in free inode routine (eg ocfs2_clear_inode)
The fix code is special for mounting phase, but it will continue
working after mounting stage. In another word, this method adds
useless code in normal inode free flow.
3> Do directly free inode in mounting phase
This method is brutal/complex and may introduce unsafe code,
currently maintainer didn't like.
At last, we chose method <1> and did partly reverted job. We reverted
journal init codes, and kept cleanup codes flow.
Link: https://lkml.kernel.org/r/20220424130952.2436-1-heming.zhao@suse.com Link: https://lkml.kernel.org/r/20220424130952.2436-2-heming.zhao@suse.com Fixes: cdee7671070bd ("ocfs2: cleanup journal init and shutdown") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jakob Koschel [Fri, 29 Apr 2022 21:37:57 +0000 (14:37 -0700)]
ocfs2: remove usage of list iterator variable after the loop body
To move the list iterator variable into the list_for_each_entry_*() macro
in the future it should be avoided to use the list iterator variable after
the loop body.
To *never* use the list iterator variable after the loop it was concluded
to use a separate iterator variable [1].
Jakob Koschel [Fri, 29 Apr 2022 21:37:57 +0000 (14:37 -0700)]
ocfs2: replace usage of found with dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*() macro
in the future it should be avoided to use the list iterator variable after
the loop body.
To *never* use the list iterator variable after the loop it was concluded
to use a separate iterator variable instead of a found boolean [1].
This removes the need to use a found variable and simply checking if the
variable was set, can determine if the break/goto was hit.
i915:
- Fix #5284: Backlight control regression on XMG Core 15 e21
- Fix black display plane on Acer One AO532h
- Two smaller display fixes
sunxi:
- Single fix removing applying PHYS_OFFSET twice"
* tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend
drm/amd/pm: fix the deadlock issue observed on SI
drm/amd/display: Fix memory leak in dcn21_clock_source_create
drm/amdgpu: don't runtime suspend if there are displays attached (v3)
drm/amdkfd: CRIU add support for GWS queues
drm/amdkfd: Fix GWS queue count
drm/sun4i: Remove obsolete references to PHYS_OFFSET
drm/i915/fbc: Consult hw.crtc instead of uapi.crtc
drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses
drm/i915: Check EDID for HDR static metadata when choosing blc
drm/i915: Fix DISP_POS_Y and DISP_HEIGHT defines
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
Merge tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These take back recent chages that started to confuse users and fix up
an attr.show callback prototype in a driver.
Specifics:
- Stop warning about deprecation of the userspace thermal governor
and cooling device status interface, because there are cases in
which user space has to drive thermal management with the help of
them (Daniel Lezcano)
- Fix attr.show callback prototype in the int340x thermal driver
(Kees Cook)"
* tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/governor: Remove deprecated information
Revert "thermal/core: Deprecate changing cooling device state from userspace"
thermal: int340x: Fix attr.show callback prototype
Merge tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up recent intel_idle driver changes and fix some ARM cpufreq
driver issues.
Specifics:
- Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov,
Vladimir Zapolskiy).
- Fix memory leak with the Sun501 driver (Xiaobing Luo).
- Make intel_idle enable C1E promotion on all CPUs when C1E is
preferred to C1 (Artem Bityutskiy).
- Make C6 optimization on Sapphire Rapids added recently work as
expected if both C1E and C1 are "preferred" (Artem Bityutskiy)"
* tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Fix SPR C6 optimization
intel_idle: Fix the 'preferred_cstates' module parameter
cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
cpufreq: qcom-hw: provide online/offline operations
cpufreq: qcom-hw: fix the opp entries refcounting
cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
cpufreq: qcom-hw: drop affinity hint before freeing the IRQ
Merge tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael WysockiL
"These fix up the ACPI processor driver after a change made during the
5.16 cycle that inadvertently broke falling back to shallower C-states
when C3 cannot be used.
Specifics:
- Make the ACPI processor driver avoid falling back to C3 type of
C-states when C3 cannot be requested (Ville Syrjälä)
- Revert a quirk that is not necessary any more after fixing the
underlying issue properly (Ville Syrjälä)"
* tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
ACPI: processor: idle: Avoid falling back to C3 type C-states
Merge tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- asus-wmi bug-fixes
- intel-sdsu bug-fixes
- build (warning) fixes
- couple of hw-id additions"
* tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: pmc/core: change pmc_lpm_modes to static
platform/x86/intel/sdsi: Fix bug in multi packet reads
platform/x86/intel/sdsi: Poll on ready bit for writes
platform/x86/intel/sdsi: Handle leaky bucket
platform/x86: intel-uncore-freq: Prevent driver loading in guests
platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard
platform/x86: dell-laptop: Add quirk entry for Latitude 7520
platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails
platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf()
tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
Merge tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A minor fix for the DT binding documentation of the rt5190a driver"
* tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Revise the rt5190a buck/ldo description
// Send 2 data segments
+0 write(4, ..., 2000) = 2000
+0 > P. 1:2001(2000) ack 1
// TLP
+.022 > P. 1001:2001(1000) ack 1
// Continue to send 8 data segments
+0 write(4, ..., 10000) = 10000
+0 > P. 2001:10001(8000) ack 1
// RTO
+.188 > . 1:1001(1000) ack 1
// The original data is acked and new data is sent(F-RTO step 2.b)
+0 < . 1:1(0) ack 2001 win 257
+0 > P. 10001:12001(2000) ack 1
// D-SACK caused by TLP is regarded as a dupack, this results in
// the incorrect judgment of "loss was real"(F-RTO step 3.a)
+.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>
// Never-retransmitted data(3001:4001) are acked and
// expect to switch to open state(F-RTO step 3.b)
+0 < . 1:1(0) ack 4001 win 257
+0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%
Fixes: b787373e24bc ("tcp: implement RFC5682 F-RTO") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Fix incorrect TCP connection tracking window reset for non-syn
packets, from Florian Westphal.
2) Incorrect dependency on CONFIG_NFT_FLOW_OFFLOAD, from Volodymyr Mytnyk.
3) Fix nft_socket from the output path, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: only do sk lookups when indev is available
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
====================
When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.
Vladimir Oltean [Wed, 27 Apr 2022 20:30:17 +0000 (23:30 +0300)]
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
The Time-Specified Departure feature is indeed mutually exclusive with
TX IP checksumming in ENETC, but TX checksumming in itself is broken and
was removed from this driver in commit 48b7802fc83f ("enetc: Remove Tx
checksumming offload code").
The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply
with software TSO's expectations, and still did the checksumming in
software by calling skb_checksum_help(). So there isn't any restriction
for the Time-Specified Departure feature.
However, enetc_setup_tc_txtime() doesn't understand that, and blindly
looks for NETIF_F_CSUM_MASK.
Instead of checking for things which can literally never happen in the
current code base, just remove the check and let the driver offload
tc-etf qdiscs.
MAINTAINERS: Update BNXT entry with firmware files
There appears to be a maintainer gap for BNXT TEE firmware files which
causes some patches to be missed. Update the entry for the BNXT Ethernet
controller with its companion firmware files.
netfilter: nft_socket: only do sk lookups when indev is available
Check if the incoming interface is available and NFT_BREAK
in case neither skb->sk nor input device are set.
Because nf_sk_lookup_slow*() assume packet headers are in the
'in' direction, use in postrouting is not going to yield a meaningful
result. Same is true for the forward chain, so restrict the use
to prerouting, input and output.
Use in output work if a socket is already attached to the skb.
Fixes: 6076d560d83e ("netfilter: nf_tables: add support for native socket matching") Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
gfs2: No short reads or writes upon glock contention
Commit 9d0ff4feb1a7 ("gfs2: Fix mmap + page fault deadlocks for buffered
I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
allow dropping the inode glock while faulting in user buffers. When the
lock was dropped, a short result was returned to indicate that the
operation was interrupted.
As pointed out by Linus (see the link below), this behavior is broken
and the operations should always re-acquire the inode glock and resume
the operation instead.
Paolo Abeni [Thu, 28 Apr 2022 08:18:51 +0000 (10:18 +0200)]
Merge tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression causing some HCI events to be discarded when they
shouldn't.
* tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
====================
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
Calling tls_append_frag when max_open_record_len == record->len might
add an empty fragment to the TLS record if the call happens to be on the
page boundary. Normally tls_append_frag coalesces the zero-sized
fragment to the previous one, but not if it's on page boundary.
If a resync happens then, the mlx5 driver posts dump WQEs in
tx_post_resync_dump, and the empty fragment may become a data segment
with byte_count == 0, which will confuse the NIC and lead to a CQE
error.
This commit fixes the described issue by skipping tls_append_frag on
zero size to avoid adding empty fragments. The fix is not in the driver,
because an empty fragment is hardly the desired behavior.
We've added 5 non-merge commits during the last 20 day(s) which contain
a total of 6 files changed, 34 insertions(+), 12 deletions(-).
The main changes are:
1) Fix xsk sockets when rx and tx are separately bound to the same umem, also
fix xsk copy mode combined with busy poll, from Maciej Fijalkowski.
2) Fix BPF tunnel/collect_md helpers with bpf_xmit lwt hook usage which triggered
a crash due to invalid metadata_dst access, from Eyal Birger.
3) Fix release of page pool in XDP live packet mode, from Toke Høiland-Jørgensen.
4) Fix potential NULL pointer dereference in kretprobes, from Adam Zabrocki.
(Masami & Steven preferred this small fix to be routed via bpf tree given it's
follow-up fix to Masami's rethook work that went via bpf earlier, too.)
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix possible crash when multiple sockets are created
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
bpf, lwt: Fix crash when using bpf_skb_set_tunnel_key() from bpf_xmit lwt hook
bpf: Fix release of page_pool in BPF_PROG_RUN in test runner
xsk: Fix l2fwd for copy mode + busy poll combo
====================
drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend
Without MMHUB clock gating being enabled then MMHUB will not disconnect
from DF and will result in DF C-state entry can't be accessed during S2idle
suspend, and eventually s0ix entry will be blocked.
Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Fri, 8 Apr 2022 11:51:34 +0000 (19:51 +0800)]
drm/amd/pm: fix the deadlock issue observed on SI
The adev->pm.mutx is already held at the beginning of
amdgpu_dpm_compute_clocks/amdgpu_dpm_enable_uvd/amdgpu_dpm_enable_vce.
But on their calling path, amdgpu_display_bandwidth_update will be
called and thus its sub functions amdgpu_dpm_get_sclk/mclk. They
will then try to acquire the same adev->pm.mutex and deadlock will
occur.
By placing amdgpu_display_bandwidth_update outside of adev->pm.mutex
protection(considering logically they do not need such protection) and
restructuring the call flow accordingly, we can eliminate the deadlock
issue. This comes with no real logics change.
Alex Deucher [Tue, 28 Dec 2021 22:26:24 +0000 (17:26 -0500)]
drm/amdgpu: don't runtime suspend if there are displays attached (v3)
We normally runtime suspend when there are displays attached if they
are in the DPMS off state, however, if something wakes the GPU
we send a hotplug event on resume (in case any displays were connected
while the GPU was in suspend) which can cause userspace to light
up the displays again soon after they were turned off.
Prior to
commit 782c4c62d18183 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's."),
the driver took a runtime pm reference when the fbdev emulation was
enabled because we didn't implement proper shadowing support for
vram access when the device was off so the device never runtime
suspended when there was a console bound. Once that commit landed,
we now utilize the core fb helper implementation which properly
handles the emulation, so runtime pm now suspends in cases where it did
not before. Ultimately, we need to sort out why runtime suspend in not
working in this case for some users, but this should restore similar
behavior to before.
v2: move check into runtime_suspend
v3: wake ups -> wakeups in comment, retain pm_runtime behavior in
runtime_idle callback
Fixes: 782c4c62d18183 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Link: https://lore.kernel.org/r/20220403132322.51c90903@darkstar.example.org/ Tested-by: Michele Ballabio <ballabio.m@gmail.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
David Yat Sin [Wed, 13 Apr 2022 15:37:53 +0000 (11:37 -0400)]
drm/amdkfd: CRIU add support for GWS queues
Add support to checkpoint/restore GWS (Global Wave Sync) queues.
Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Yat Sin [Mon, 18 Apr 2022 15:55:58 +0000 (11:55 -0400)]
drm/amdkfd: Fix GWS queue count
dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated
each time the queue gets evicted.
Fixes: c892e531cc9b ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin <david.yatsin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Subsystems affected by this patch series: mm/kasan and mm/debug"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
docs: vm/page_owner: use literal blocks for param description
kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
kasan: prevent cpu_quarantine corruption when CPU offline and cache shrink occur at same time
kasan_quarantine_remove_cache() is called in kmem_cache_shrink()/
destroy(). The kasan_quarantine_remove_cache() call is protected by
cpuslock in kmem_cache_destroy() to ensure serialization with
kasan_cpu_offline().
However the kasan_quarantine_remove_cache() call is not protected by
cpuslock in kmem_cache_shrink(). When a CPU is going offline and cache
shrink occurs at same time, the cpu_quarantine may be corrupted by
interrupt (per_cpu_remove_cache operation).
So add a cpu_quarantine offline flags check in per_cpu_remove_cache().
[akpm@linux-foundation.org: add comment, per Zqiang]
The Sapphire Rapids (SPR) C6 optimization was added to the end of the
'spr_idle_state_table_update()' function. However, the function has a
'return' which may happen before the optimization has a chance to run.
And this may prevent the optimization from happening.
This is an unlikely scenario, but possible if user boots with, say,
the 'intel_idle.preferred_cstates=6' kernel boot option.
This patch fixes the issue by eliminating the problematic 'return'
statement.
Fixes: c3e064f5f286 ("intel_idle: add core C6 optimization for SPR") Suggested-by: Jan Beulich <jbeulich@suse.com> Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
intel_idle: Fix the 'preferred_cstates' module parameter
Problem description.
When user boots kernel up with the 'intel_idle.preferred_cstates=4' option,
we enable C1E and disable C1 states on Sapphire Rapids Xeon (SPR). In order
for C1E to work on SPR, we have to enable the C1E promotion bit on all
CPUs. However, we enable it only on one CPU.
Fix description.
The 'intel_idle' driver already has the infrastructure for disabling C1E
promotion on every CPU. This patch uses the same infrastructure for
enabling C1E promotion on every CPU. It changes the boolean
'disable_promotion_to_c1e' variable to a tri-state 'c1e_promotion'
variable.
Tested on a 2-socket SPR system. I verified the following combinations:
* C1E promotion enabled and disabled in BIOS.
* Booted with and without the 'intel_idle.preferred_cstates=4' kernel
argument.
In all 4 cases C1E promotion was correctly set on all CPUs.
Also tested on an old Broadwell system, just to make sure it does not cause
a regression. C1E promotion was correctly disabled on that system, both C1
and C1E were exposed (as expected).
Fixes: ed5baa6912eb ("intel_idle: add 'preferred_cstates' module argument") Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'cpufreq-arm-fixes-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq fixes for 5.18-rc5 from Viresh Kumar:
"- Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov and
Vladimir Zapolskiy).
- Fix memory leak with the Sun501 driver (Xiaobing Luo)."
* tag 'cpufreq-arm-fixes-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
cpufreq: qcom-hw: provide online/offline operations
cpufreq: qcom-hw: fix the opp entries refcounting
cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
cpufreq: qcom-hw: drop affinity hint before freeing the IRQ
If we pass too short string to "hex2bin" (and the string size without
the terminating NUL character is even), "hex2bin" reads one byte after
the terminating NUL character. This patch fixes it.
Note that hex_to_bin returns -1 on error and hex2bin return -EINVAL on
error - so we can't just return the variable "hi" or "lo" on error.
This inconsistency may be fixed in the next merge window, but for the
purpose of fixing this bug, we just preserve the existing behavior and
return -1 and -EINVAL.
hex2bin: make the function hex_to_bin constant-time
The function hex2bin is used to load cryptographic keys into device
mapper targets dm-crypt and dm-integrity. It should take constant time
independent on the processed data, so that concurrently running
unprivileged code can't infer any information about the keys via
microarchitectural convert channels.
This patch changes the function hex_to_bin so that it contains no
branches and no memory accesses.
Note that this shouldn't cause performance degradation because the size
of the new function is the same as the size of the old function (on
x86-64) - and the new function causes no branch misprediction penalties.
I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64
i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32
sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64
powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are
no branches in the generated code.
Merge tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
"Two fixes for rc5:
- Fix inode initialization to make sure that the inode flags are all
cleared.
- Use zone reset operation instead of close to make sure that the
zone of an empty sequential file in never in an active state after
closing the file"
* tag 'zonefs-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix management of open zones
zonefs: Clear inode information flags on inode creation
Merge tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Core fix:
- Fix a possible data corruption of the 'part' field in mtd_info
Rawnand fixes:
- Fix the check on the return value of wait_for_completion_timeout
- Fix wrong ECC parameters for mt7622
- Fix a possible memory corruption that might panic in the Qcom
driver"
* tag 'mtd/fixes-for-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: qcom: fix memory corruption that causes panic
mtd: fix 'part' field data corruption in mtd_info
mtd: rawnand: Fix return value check of wait_for_completion_timeout
mtd: rawnand: fix ecc parameters for mt7622
Minh Yuan reported a concurrency use-after-free issue in the floppy code
between raw_cmd_ioctl and seek_interrupt.
[ It turns out this has been around, and that others have reported the
KASAN splats over the years, but Minh Yuan had a reproducer for it and
so gets primary credit for reporting it for this fix - Linus ]
The problem is, this driver tends to break very easily and nowadays,
nobody is expected to use FDRAWCMD anyway since it was used to
manipulate non-standard formats. The risk of breaking the driver is
higher than the risk presented by this race, and accessing the device
requires privileges anyway.
Let's just add a config option to completely disable this ioctl and
leave it disabled by default. Distros shouldn't use it, and only those
running on antique hardware might need to enable it.
Tom Rix [Sat, 23 Apr 2022 12:30:48 +0000 (08:30 -0400)]
platform/x86/intel: pmc/core: change pmc_lpm_modes to static
Sparse reports this issue
core.c: note: in included file:
core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static?
Global variables should not be defined in headers. This only works
because core.h is only included by core.c. Single file use
variables should be static, so change its storage-class specifier
to static.
David E. Box [Wed, 20 Apr 2022 15:56:22 +0000 (08:56 -0700)]
platform/x86/intel/sdsi: Fix bug in multi packet reads
Fix bug that added an offset to the mailbox addr during multi-packet
reads. Did not affect current ABI since it doesn't support multi-packet
transactions.
Fixes: 9c481beca2c1 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David E. Box [Wed, 20 Apr 2022 15:56:21 +0000 (08:56 -0700)]
platform/x86/intel/sdsi: Poll on ready bit for writes
Due to change in firmware flow, update mailbox writes to poll on ready bit
instead of run_busy bit. This change makes the polling method consistent
for both writes and reads, which also uses the ready bit.
Fixes: 9c481beca2c1 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David E. Box [Wed, 20 Apr 2022 15:56:20 +0000 (08:56 -0700)]
platform/x86/intel/sdsi: Handle leaky bucket
To prevent an agent from indefinitely holding the mailbox firmware has
implemented a leaky bucket algorithm. Repeated access to the mailbox may
now incur a delay of up to 2.1 seconds. Add a retry loop that tries for
up to 2.5 seconds to acquire the mailbox.
Fixes: 9c481beca2c1 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: intel-uncore-freq: Prevent driver loading in guests
Loading this driver in guests results in unchecked MSR access error for
MSR 0x620.
There is no use of reading and modifying package/die scope uncore MSRs
in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent
loading of this driver in guests.
Fixes: 0a18511c3494 ("platform/x86/intel-uncore-freq: Split common and enumeration part")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870 Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard
This works on my system.
Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com> Acked-by: Thomas Weißschuh <thomas@weissschuh.net> Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@hark Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: dell-laptop: Add quirk entry for Latitude 7520
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN
and so changes to stop_timeout appear to have no effect if the laptop
is plugged in.
Hans de Goede [Wed, 27 Apr 2022 11:49:56 +0000 (13:49 +0200)]
platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails
Before this commit fan_curve_check_present() was trying to not cause
the probe to fail on devices without fan curve control by testing for
known error codes returned by asus_wmi_evaluate_method_buf().
Checking for ENODATA or ENODEV, with the latter being returned by this
function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD
is returned. But for other ACPI integer returns this function just returns
them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2.
On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to:
asus-nb-wmi: probe of asus-nb-wmi failed with error 2
Instead of playing whack a mole with error codes here, simply treat all
errors as there not being any fan curves, fixing the driver no longer
loading on the Asus U36SD laptop.
Dan Carpenter [Wed, 13 Apr 2022 07:37:44 +0000 (10:37 +0300)]
platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf()
This code tests for if the obj->buffer.length is larger than the buffer
but then it just does the memcpy() anyway.
Fixes: 29156ad209ad ("platform/x86: asus-wmi: Add support for custom fan curves") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220413073744.GB8812@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
`nf_flowtable_udp_timeout` sysctl option is available only
if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow
offload UDP timeout was added under CONFIG_NF_FLOW_TABLE
config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD
disabled and CONFIG_NF_FLOW_TABLE enabled, the
`nf_flowtable_udp_timeout` is not present in sysfs.
Please note, that TCP flow offload timeout sysctl option
is present even CONFIG_NFT_FLOW_OFFLOAD is disabled.
I suppose it was a typo in commit that adds UDP flow offload
timeout and CONFIG_NF_FLOW_TABLE should be used instead.
netfilter: nf_conntrack_tcp: re-init for syn packets only
Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell
pinpointed to nf_conntrack tcp_in_window() bug.
tcp trace shows following sequence:
I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]>
R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..]
R > I Flags [P.], seq 1:89, ack 1, [..]
Note 3rd ACK is from responder to initiator so following branch is taken:
} else if (((state->state == TCP_CONNTRACK_SYN_SENT
&& dir == IP_CT_DIR_ORIGINAL)
|| (state->state == TCP_CONNTRACK_SYN_RECV
&& dir == IP_CT_DIR_REPLY))
&& after(end, sender->td_end)) {
... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY.
This causes the scaling factor to be reset to 0: window scale option
is only present in syn(ack) packets. This in turn makes nf_conntrack
mark valid packets as out-of-window.
This was always broken, it exists even in original commit where
window tracking was added to ip_conntrack (nf_conntrack predecessor)
in 2.6.9-rc1 kernel.
Restrict to 'tcph->syn', just like the 3rd condtional added in
commit dcc16a1139a4 ("netfilter: conntrack: re-init state for retransmitted syn-ack").
Upon closer look, those conditionals/branches can be merged:
Because earlier checks prevent syn-ack from showing up in
original direction, the 'dir' checks in the conditional quoted above are
redundant, remove them. Return early for pure syn retransmitted in reply
direction (simultaneous open).
David S. Miller [Wed, 27 Apr 2022 09:58:39 +0000 (10:58 +0100)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net
-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-26
This series contains updates to ice driver only.
Ivan Vecera removes races related to VF message processing by changing
mutex_trylock() call to mutex_lock() and moving additional operations
to occur under mutex.
Petr Oros increases wait time after firmware flash as current time is
not sufficient.
Jake resolves a use-after-free issue for mailbox snapshot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
Commit 4bc773c87c5d6c ("net: dsa: lantiq_gswip: Configure all remaining
GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp
register. It helped bring this register into a well-defined state so the
driver has to rely less on the bootloader to do things right.
Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any
possibility to configure it. Upon further testing it turns out that all
boards which are supported by the GSWIP driver in OpenWrt which use an
RMII PHY have a dedicated oscillator on the board which provides the
50MHz RMII reference clock.
Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always
clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is
a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set
the MAC also generates the RMII reference clock whose signal then
conflicts with the signal from the oscillator on the board. This results
in a constant cycle of the PHY detecting link up/down (and as a result
of that: the two ports using the AR8030 PHYs are not working).
At the time of writing this patch there's no known board where the MAC
(GSWIP) has to generate the RMII reference clock. If needed this can be
implemented in future by providing a device-tree flag so the
GSWIP_MII_CFG_RMII_CLK bit can be toggled per port.
Fixes: 4bc773c87c5d6c ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: Use this_cpu_inc() to increment net->core_stats
The macro dev_core_stats_##FIELD##_inc() disables preemption and invokes
netdev_core_stats_alloc() to return a per-CPU pointer.
netdev_core_stats_alloc() will allocate memory on its first invocation
which breaks on PREEMPT_RT because it requires non-atomic context for
memory allocation.
This can be avoided by enabling preemption in netdev_core_stats_alloc()
assuming the caller always disables preemption.
It might be better to replace local_inc() with this_cpu_inc() now that
dev_core_stats_##FIELD##_inc() gained a preempt-disable section and does
not rely on already disabled preemption. This results in less
instructions on x86-64:
local_inc:
| incl %gs:__preempt_count(%rip) # __preempt_count
| movq 488(%rdi), %rax # _1->core_stats, _22
| testq %rax, %rax # _22
| je .L585 #,
| add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__
| .L586:
| testq %rax, %rax # _27
| je .L587 #,
| incq (%rax) # _6->a.counter
| .L587:
| decl %gs:__preempt_count(%rip) # __preempt_count
Merge tag 'for-5.18/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and updates from Helge Deller:
"A bunch of outstanding fbdev patches - all trivial and small"
* tag 'for-5.18/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: clps711x-fb: Use syscon_regmap_lookup_by_phandle
video: fbdev: mmp: replace usage of found with dedicated list iterator variable
video: fbdev: sh_mobile_lcdcfb: Remove sh_mobile_lcdc_check_var() declaration
video: fbdev: i740fb: Error out if 'pixclock' equals zero
video: fbdev: i740fb: use memset_io() to clear screen
video: fbdev: s3fb: Error out if 'pixclock' equals zero
video: fbdev: arkfb: Error out if 'pixclock' equals zero
video: fbdev: tridentfb: Error out if 'pixclock' equals zero
video: fbdev: vt8623fb: Error out if 'pixclock' equals zero
video: fbdev: kyro: Error out if 'lineclock' equals zero
video: fbdev: neofb: Fix the check of 'var->pixclock'
video: fbdev: imxfb: Fix missing of_node_put in imxfb_probe
video: fbdev: omap: Make it CCF clk API compatible
video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.h
video: fbdev: pm2fb: Fix a kernel-doc formatting issue
linux/fb.h: Spelling s/palette/palette/
video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300()
video: fbdev: pxafb: use if else instead
video: fbdev: udlfb: properly check endpoint type
video: fbdev: of: display_timing: Remove a redundant zeroing of memory
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
This attempts to cleanup the hci_conn if it cannot be aborted as
otherwise it would likely result in having the controller and host
stack out of sync with respect to connection handle.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Merge tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- direct IO fixes:
- restore passing file offset to correctly calculate checksums
when repairing on read and bio split happens
- use correct bio when sumitting IO on zoned filesystem
- zoned mode fixes:
- fix selection of device to correctly calculate device
capabilities when allocating a new bio
- use a dedicated lock for exclusion during relocation
- fix leaked plug after failure syncing log
- fix assertion during scrub and relocation
* tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: use dedicated lock for data relocation
btrfs: fix assertion failure during scrub due to block group reallocation
btrfs: fix direct I/O writes for split bios on zoned devices
btrfs: fix direct I/O read repair for split bios
btrfs: fix and document the zoned device choice in alloc_new_bio
btrfs: fix leaked plug after failure syncing log on zoned filesystems
Bluetooth: hci_event: Fix creating hci_conn object on error status
It is useless to create a hci_conn object if on error status as the
result would be it being freed in the process and anyway it is likely
the result of controller and host stack being out of sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Bluetooth: hci_event: Fix checking for invalid handle on error status
Commit db37ab5f3d4f3 introduces checks for handle range
(e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem
to respect the valid range int case of error status:
Because of it is impossible to cleanup the connections properly since
the stack would attempt to cancel the connection which is no longer in
progress causing the following trace:
Jacob Keller [Tue, 12 Apr 2022 17:34:22 +0000 (10:34 -0700)]
ice: fix use-after-free when deinitializing mailbox snapshot
During ice_sriov_configure, if num_vfs is 0, we are being asked by the
kernel to remove all VFs.
The driver first de-initializes the snapshot before freeing all the VFs.
This results in a use-after-free BUG detected by KASAN. The bug occurs
because the snapshot can still be accessed until all VFs are removed.
Fix this by freeing all the VFs first before calling
ice_mbx_deinit_snapshot.
[ +0.032591] ==================================================================
[ +0.000021] BUG: KASAN: use-after-free in ice_mbx_vf_state_handler+0x1c3/0x410 [ice]
[ +0.000315] Write of size 28 at addr ffff889908eb6f28 by task kworker/55:2/1530996
[ +0.000025] The buggy address belongs to the object at ffff889908eb6f00
which belongs to the cache kmalloc-96 of size 96
[ +0.000016] The buggy address is located 40 bytes inside of
96-byte region [ffff889908eb6f00, ffff889908eb6f60)
[ +0.000016] Memory state around the buggy address:
[ +0.000012] ffff889908eb6e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000014] ffff889908eb6e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000014] >ffff889908eb6f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000011] ^
[ +0.000013] ffff889908eb6f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ +0.000013] ffff889908eb7000: fa fb fb fb fb fb fb fb fc fc fc fc fa fb fb fb
[ +0.000012] ==================================================================
Fixes: 9baa74f31d6d ("ice: warn about potentially malicious VFs") Reported-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Petr Oros [Wed, 13 Apr 2022 15:37:45 +0000 (17:37 +0200)]
ice: wait 5 s for EMP reset after firmware flash
We need to wait 5 s for EMP reset after firmware flash. Code was extracted
from OOT driver (ice v1.8.3 downloaded from sourceforge). Without this
wait, fw_activate let card in inconsistent state and recoverable only
by second flash/activate. Flash was tested on these fw's:
From -> To
3.00 -> 3.10/3.20
3.10 -> 3.00/3.20
3.20 -> 3.00/3.10
Reproducer:
[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
Preparing to flash
[fw.mgmt] Erasing
[fw.mgmt] Erasing done
[fw.mgmt] Flashing 100%
[fw.mgmt] Flashing done 100%
[fw.undi] Erasing
[fw.undi] Erasing done
[fw.undi] Flashing 100%
[fw.undi] Flashing done 100%
[fw.netlist] Erasing
[fw.netlist] Erasing done
[fw.netlist] Flashing 100%
[fw.netlist] Flashing done 100%
Activate new firmware by devlink reload
[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
reload_actions_performed:
fw_activate
[root@host ~]# ip link show ens7f0
71: ens7f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
altname enp202s0f0
dmesg after flash:
[ 55.120788] ice: Copyright (c) 2018, Intel Corporation.
[ 55.274734] ice 0000:ca:00.0: Get PHY capabilities failed status = -5, continuing anyway
[ 55.569797] ice 0000:ca:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.28.0
[ 55.603629] ice 0000:ca:00.0: Get PHY capability failed.
[ 55.608951] ice 0000:ca:00.0: ice_init_nvm_phy_type failed: -5
[ 55.647348] ice 0000:ca:00.0: PTP init successful
[ 55.675536] ice 0000:ca:00.0: DCB is enabled in the hardware, max number of TCs supported on this port are 8
[ 55.685365] ice 0000:ca:00.0: FW LLDP is disabled, DCBx/LLDP in SW mode.
[ 55.692179] ice 0000:ca:00.0: Commit DCB Configuration to the hardware
[ 55.701382] ice 0000:ca:00.0: 126.024 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x8 link at 0000:c9:02.0 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
Reboot doesn’t help, only second flash/activate with OOT or patched
driver put card back in consistent state.
After patch:
[root@host ~]# devlink dev flash pci/0000:ca:00.0 file E810_XXVDA4_FH_O_SEC_FW_1p6p1p9_NVM_3p10_PLDMoMCTP_0.11_8000AD7B.bin
Preparing to flash
[fw.mgmt] Erasing
[fw.mgmt] Erasing done
[fw.mgmt] Flashing 100%
[fw.mgmt] Flashing done 100%
[fw.undi] Erasing
[fw.undi] Erasing done
[fw.undi] Flashing 100%
[fw.undi] Flashing done 100%
[fw.netlist] Erasing
[fw.netlist] Erasing done
[fw.netlist] Flashing 100%
[fw.netlist] Flashing done 100%
Activate new firmware by devlink reload
[root@host ~]# devlink dev reload pci/0000:ca:00.0 action fw_activate
reload_actions_performed:
fw_activate
[root@host ~]# ip link show ens7f0
19: ens7f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether b4:96:91:dc:72:e0 brd ff:ff:ff:ff:ff:ff
altname enp202s0f0
Fixes: e3cf0cca59e70d ("ice: support immediate firmware activation via devlink reload") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera [Tue, 19 Apr 2022 14:22:21 +0000 (16:22 +0200)]
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
Previous patch labelled "ice: Fix incorrect locking in
ice_vc_process_vf_msg()" fixed an issue with ignored messages
sent by VF driver but a small race window still left.
Recently caught trace during 'ip link set ... vf 0 vlan ...' operation:
[ 7332.995625] ice 0000:3b:00.0: Clearing port VLAN on VF 0
[ 7333.001023] iavf 0000:3b:01.0: Reset indication received from the PF
[ 7333.007391] iavf 0000:3b:01.0: Scheduling reset task
[ 7333.059575] iavf 0000:3b:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 3
[ 7333.059626] ice 0000:3b:00.0: Invalid message from VF 0, opcode 3, len 4, error -1
Setting of VLAN for VF causes a reset of the affected VF using
ice_reset_vf() function that runs with cfg_lock taken:
1. ice_notify_vf_reset() informs IAVF driver that reset is needed and
IAVF schedules its own reset procedure
2. Bit ICE_VF_STATE_DIS is set in vf->vf_state
3. Misc initialization steps
4. ice_sriov_post_vsi_rebuild() -> ice_vf_set_initialized() and that
clears ICE_VF_STATE_DIS in vf->vf_state
Step 3 is mentioned race window because IAVF reset procedure runs in
parallel and one of its step is sending of VIRTCHNL_OP_GET_VF_RESOURCES
message (opcode==3). This message is handled in ice_vc_process_vf_msg()
and if it is received during the mentioned race window then it's
marked as invalid and error is returned to VF driver.
Protect vf_state check in ice_vc_process_vf_msg() by cfg_lock to avoid
this race condition.
Fixes: 04ceb4f47b30 ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Tested-by: Fei Liu <feliu@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ivan Vecera [Fri, 1 Apr 2022 10:40:52 +0000 (12:40 +0200)]
ice: Fix incorrect locking in ice_vc_process_vf_msg()
Usage of mutex_trylock() in ice_vc_process_vf_msg() is incorrect
because message sent from VF is ignored and never processed.
Use mutex_lock() instead to fix the issue. It is safe because this
mutex is used to prevent races between VF related NDOs and
handlers processing request messages from VF and these handlers
are running in ice_service_task() context. Additionally move this
mutex lock prior ice_vc_is_opcode_allowed() call to avoid potential
races during allowlist access.
Fixes: 04ceb4f47b30 ("ice: Fix race conditions between virtchnl handling and VF ndo ops") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
xsk: Fix possible crash when multiple sockets are created
Fix a crash that happens if an Rx only socket is created first, then a
second socket is created that is Tx only and bound to the same umem as
the first socket and also the same netdev and queue_id together with the
XDP_SHARED_UMEM flag. In this specific case, the tx_descs array page
pool was not created by the first socket as it was an Rx only socket.
When the second socket is bound it needs this tx_descs array of this
shared page pool as it has a Tx component, but unfortunately it was
never allocated, leading to a crash. Note that this array is only used
for zero-copy drivers using the batched Tx APIs, currently only ice and
i40e.
Detect such case during bind() and allocate this memory region via newly
introduced xp_alloc_tx_descs(). Also, use kvcalloc instead of kcalloc as
for other buffer pool allocations, so that it matches the kvfree() from
xp_destroy().
Fixes: 65e837d98a40 ("i40e: xsk: Move tmp desc array from driver to pool") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220425153745.481322-1-maciej.fijalkowski@intel.com
Adam Zabrocki [Fri, 22 Apr 2022 16:40:27 +0000 (18:40 +0200)]
kprobes: Fix KRETPROBES when CONFIG_KRETPROBE_ON_RETHOOK is set
The recent kernel change in 7df43f83baa8 ("kprobes: Use rethook for kretprobe
if possible"), introduced a potential NULL pointer dereference bug in the
KRETPROBE mechanism. The official Kprobes documentation defines that "Any or
all handlers can be NULL". Unfortunately, there is a missing return handler
verification to fulfill these requirements and can result in a NULL pointer
dereference bug.
This patch adds such verification in kretprobe_rethook_handler() function.
Fixes: 7df43f83baa8 ("kprobes: Use rethook for kretprobe if possible") Signed-off-by: Adam Zabrocki <pi3@pi3.com.pl> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Anil S. Keshavamurthy <anil.s.keshavamurthy@intel.com> Link: https://lore.kernel.org/bpf/20220422164027.GA7862@pi3.com.pl
Samuel Holland [Sun, 24 Apr 2022 16:26:21 +0000 (11:26 -0500)]
drm/sun4i: Remove obsolete references to PHYS_OFFSET
commit 309d614ad51c ("soc: sunxi: Deal with the MBUS DMA offsets in a
central place") added a platform device notifier that sets the DMA
offset for all of the display engine frontend and backend devices.
The code applying the offset to DMA buffer physical addresses was then
removed from the backend driver in commit 9e03d8e42868 ("drm/sun4i:
backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET
was left in the frontend driver.
As a result, the offset was applied twice in the frontend driver. This
likely went unnoticed because it only affects specific configurations
(scaling or certain pixel formats) where the frontend is used, on boards
with both one of these older SoCs and more than 1 GB of DRAM.
In addition, the references to PHYS_OFFSET prevent compiling the driver
on architectures where PHYS_OFFSET is not defined.
virtio_net: fix wrong buf address calculation when using xdp
We received a report[1] of kernel crashes when Cilium is used in XDP
mode with virtio_net after updating to newer kernels. After
investigating the reason it turned out that when using mergeable bufs
with an XDP program which adjusts xdp.data or xdp.data_meta page_to_buf()
calculates the build_skb address wrong because the offset can become less
than the headroom so it gets the address of the previous page (-X bytes
depending on how lower offset is):
page_to_skb: page addr ffff9eb2923e2000 buf ffff9eb2923e1ffc offset 252 headroom 256
This is a pr_err() I added in the beginning of page_to_skb which clearly
shows offset that is less than headroom by adding 4 bytes of metadata
via an xdp prog. The calculations done are:
receive_mergeable():
headroom = VIRTIO_XDP_HEADROOM; // VIRTIO_XDP_HEADROOM == 256 bytes
offset = xdp.data - page_address(xdp_page) -
vi->hdr_len - metasize;
page_to_skb():
p = page_address(page) + offset;
...
buf = p - headroom;
Now buf goes -4 bytes from the page's starting address as can be seen
above which is set as skb->head and skb->data by build_skb later. Depending
on what's done with the skb (when it's freed most often) we get all kinds
of corruptions and BUG_ON() triggers in mm[2]. We have to recalculate
the new headroom after the xdp program has run, similar to how offset
and len are recalculated. Headroom is directly related to
data_hard_start, data and data_meta, so we use them to get the new size.
The result is correct (similar pr_err() in page_to_skb, one case of
xdp_page and one case of virtnet buf):
a) Case with 4 bytes of metadata
[ 115.949641] page_to_skb: page addr ffff8b4dcfad2000 offset 252 headroom 252
[ 121.084105] page_to_skb: page addr ffff8b4dcf018000 offset 20732 headroom 252
b) Case of pushing data +32 bytes
[ 153.181401] page_to_skb: page addr ffff8b4dd0c4d000 offset 288 headroom 288
[ 158.480421] page_to_skb: page addr ffff8b4dd00b0000 offset 24864 headroom 288
c) Case of pushing data -33 bytes
[ 835.906830] page_to_skb: page addr ffff8b4dd3270000 offset 223 headroom 223
[ 840.839910] page_to_skb: page addr ffff8b4dcdd68000 offset 12511 headroom 223
Offset and headroom are equal because offset points to the start of
reserved bytes for the virtio_net header which are at buf start +
headroom, while data points at buf start + vnet hdr size + headroom so
when data or data_meta are adjusted by the xdp prog both the headroom size
and the offset change equally. We can use data_hard_start to compute the
new headroom after the xdp prog (linearized / page start case, the
virtnet buf case is similar just with bigger base offset):
xdp.data_hard_start = page_address + vnet_hdr
xdp.data = page_address + vnet_hdr + headroom
new headroom after xdp prog = xdp.data - xdp.data_hard_start - metasize
compile: clang -O2 -g -Wall -target bpf -c xdp_pass.c -o xdp_pass.o
load on virtio_net: ip link set enp1s0 xdpdrv obj xdp_pass.o sec xdp_pass
CC: stable@vger.kernel.org CC: Jason Wang <jasowang@redhat.com> CC: Xuan Zhuo <xuanzhuo@linux.alibaba.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: virtualization@lists.linux-foundation.org Fixes: a2d7d342d7cf ("virtio_net: get build_skb() buf by data ptr") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220425103703.3067292-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: dsa: mv88e6xxx: Fix port_hidden_wait to account for port_base_addr
The other port_hidden functions rely on the port_read/port_write
functions to access the hidden control port. These functions apply the
offset for port_base_addr where applicable. Update port_hidden_wait to
use the port_wait_bit so that port_base_addr offsets are accounted for
when waiting for the busy bit to change.
Without the offset the port_hidden_wait function would timeout on
devices that have a non-zero port_base_addr (e.g. MV88E6141), however
devices that have a zero port_base_addr would operate correctly (e.g.
MV88E6390).
Fixes: ccdf6b67fe77 ("net: dsa: mv88e6xxx: update code operating on hidden registers") Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220425070454.348584-1-nathan@nathanrossi.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jonathan Lemon [Sun, 24 Apr 2022 16:53:07 +0000 (09:53 -0700)]
net: bcmgenet: hide status block before TX timestamping
The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '20b1b6c5fae3 ("net: bcmgenet: always enable status blocks")'
However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.
Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Lin Ma [Fri, 22 Apr 2022 11:43:40 +0000 (19:43 +0800)]
mctp: defer the kfree of object mdev->addrs
The function mctp_unregister() reclaims the device's relevant resource
when a netcard detaches. However, a running routine may be unaware of
this and cause the use-after-free of the mdev->addrs object.
An attacker can adopt the (recent provided) mtcpserial driver with pty
to fake the device detaching and use the userfaultfd to increase the
race success chance (in mctp_sendmsg). The KASan report for such a POC
is shown below:
[ 86.051955] ==================================================================
[ 86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d
[ 86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295
[ 86.051955]
[ 86.051955] Call Trace:
[ 86.051955] <TASK>
[ 86.051955] dump_stack_lvl+0x33/0x42
[ 86.051955] print_report.cold.13+0xb2/0x6b3
[ 86.051955] ? preempt_schedule_irq+0x57/0x80
[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
[ 86.051955] kasan_report+0xa5/0x120
[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
[ 86.051955] mctp_local_output+0x4e9/0xb7d
[ 86.051955] ? mctp_dev_set_key+0x79/0x79
[ 86.051955] ? copyin+0x38/0x50
[ 86.051955] ? _copy_from_iter+0x1b6/0xf20
[ 86.051955] ? sysvec_apic_timer_interrupt+0x97/0xb0
[ 86.051955] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 86.051955] ? mctp_local_output+0x1/0xb7d
[ 86.051955] mctp_sendmsg+0x64d/0xdb0
[ 86.051955] ? mctp_sk_close+0x20/0x20
[ 86.051955] ? __fget_light+0x2fd/0x4f0
[ 86.051955] ? mctp_sk_close+0x20/0x20
[ 86.051955] sock_sendmsg+0xdd/0x110
[ 86.051955] __sys_sendto+0x1cc/0x2a0
[ 86.051955] ? __ia32_sys_getpeername+0xa0/0xa0
[ 86.051955] ? new_sync_write+0x335/0x550
[ 86.051955] ? alloc_file+0x22f/0x500
[ 86.051955] ? __ip_do_redirect+0x820/0x1820
[ 86.051955] ? vfs_write+0x44d/0x7b0
[ 86.051955] ? vfs_write+0x44d/0x7b0
[ 86.051955] ? fput_many+0x15/0x120
[ 86.051955] ? ksys_write+0x155/0x1b0
[ 86.051955] ? __ia32_sys_read+0xa0/0xa0
[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
[ 86.051955] ? exit_to_user_mode_prepare+0x2f/0x120
[ 86.051955] ? syscall_exit_to_user_mode+0x12/0x20
[ 86.051955] do_syscall_64+0x3a/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955] RIP: 0033:0x7f82118a56b3
[ 86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[ 86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3
[ 86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007
[ 86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c
[ 86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0
[ 86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000
[ 86.051955] </TASK>
[ 86.051955]
[ 86.051955] Allocated by task 295:
[ 86.051955] kasan_save_stack+0x1c/0x40
[ 86.051955] __kasan_kmalloc+0x84/0xa0
[ 86.051955] mctp_rtm_newaddr+0x242/0x610
[ 86.051955] rtnetlink_rcv_msg+0x2fd/0x8b0
[ 86.051955] netlink_rcv_skb+0x11c/0x340
[ 86.051955] netlink_unicast+0x439/0x630
[ 86.051955] netlink_sendmsg+0x752/0xc00
[ 86.051955] sock_sendmsg+0xdd/0x110
[ 86.051955] __sys_sendto+0x1cc/0x2a0
[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
[ 86.051955] do_syscall_64+0x3a/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955]
[ 86.051955] Freed by task 301:
[ 86.051955] kasan_save_stack+0x1c/0x40
[ 86.051955] kasan_set_track+0x21/0x30
[ 86.051955] kasan_set_free_info+0x20/0x30
[ 86.051955] __kasan_slab_free+0x104/0x170
[ 86.051955] kfree+0x8c/0x290
[ 86.051955] mctp_dev_notify+0x161/0x2c0
[ 86.051955] raw_notifier_call_chain+0x8b/0xc0
[ 86.051955] unregister_netdevice_many+0x299/0x1180
[ 86.051955] unregister_netdevice_queue+0x210/0x2f0
[ 86.051955] unregister_netdev+0x13/0x20
[ 86.051955] mctp_serial_close+0x6d/0xa0
[ 86.051955] tty_ldisc_kill+0x31/0xa0
[ 86.051955] tty_ldisc_hangup+0x24f/0x560
[ 86.051955] __tty_hangup.part.28+0x2ce/0x6b0
[ 86.051955] tty_release+0x327/0xc70
[ 86.051955] __fput+0x1df/0x8b0
[ 86.051955] task_work_run+0xca/0x150
[ 86.051955] exit_to_user_mode_prepare+0x114/0x120
[ 86.051955] syscall_exit_to_user_mode+0x12/0x20
[ 86.051955] do_syscall_64+0x46/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955]
[ 86.051955] The buggy address belongs to the object at ffff888005f298c0
[ 86.051955] which belongs to the cache kmalloc-8 of size 8
[ 86.051955] The buggy address is located 0 bytes inside of
[ 86.051955] 8-byte region [ffff888005f298c0, ffff888005f298c8)
[ 86.051955]
[ 86.051955] The buggy address belongs to the physical page:
[ 86.051955] flags: 0x100000000000200(slab|node=0|zone=1)
[ 86.051955] raw: 0100000000000200dead000000000100dead000000000122ffff888005c42280
[ 86.051955] raw: 0000000000000000000000008066006600000001ffffffff0000000000000000
[ 86.051955] page dumped because: kasan: bad access detected
[ 86.051955]
[ 86.051955] Memory state around the buggy address:
[ 86.051955] ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
[ 86.051955] ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc
[ 86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc
[ 86.051955] ^
[ 86.051955] ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
[ 86.051955] ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
[ 86.051955] ==================================================================
To this end, just like the commit 596b5ad838af ("Bluetooth: defer
cleanup of resources in hci_unregister_dev()") this patch defers the
destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put,
where the refcount of mdev is zero and the entire device is reclaimed.
This prevents the use-after-free because the sendmsg thread holds the
reference of mdev in the mctp_route object.
Fixes: 7fb5ea918375 (mctp: Add device handling and netlink interface) Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20220422114340.32346-1-linma@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ville Syrjälä [Wed, 13 Apr 2022 15:28:51 +0000 (18:28 +0300)]
drm/i915/fbc: Consult hw.crtc instead of uapi.crtc
plane_state->uapi.crtc is not what we want to be looking at.
If bigjoiner is used hw.crtc is what tells us what crtc the plane
is supposedly using.
Not an actual problem on current hardware as the only FBC capable
pipe (A) can't be a bigjoiner slave and thus uapi.crtc==hw.crtc
always here. But when we get more FBC instances this will become
actually important.
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Alexander Shiyan [Wed, 20 Apr 2022 07:06:39 +0000 (10:06 +0300)]
video: fbdev: clps711x-fb: Use syscon_regmap_lookup_by_phandle
Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Jakub Kicinski [Mon, 25 Apr 2022 18:03:51 +0000 (11:03 -0700)]
Merge branch 'net-smc-two-fixes-for-smc-fallback'
Wen Gu says:
====================
net/smc: Two fixes for smc fallback
This patch set includes two fixes for smc fallback:
Patch 1/2 introduces some simple helpers to wrap the replacement
and restore of clcsock's callback functions. Make sure that only
the original callbacks will be saved and not overwritten.
Patch 2/2 fixes a syzbot reporting slab-out-of-bound issue where
smc_fback_error_report() accesses the already freed smc sock (see
https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/).
The patch fixes it by resetting sk_user_data and restoring clcsock
callback functions timely in fallback situation.
But it should be noted that although patch 2/2 can fix the issue
of 'slab-out-of-bounds/use-after-free in smc_fback_error_report',
it can't pass the syzbot reproducer test. Because after applying
these two patches in upstream, syzbot reproducer triggered another
known issue like this:
==================================================================
BUG: KASAN: use-after-free in tcp_retransmit_timer+0x2ef3/0x3360 net/ipv4/tcp_timer.c:511
Read of size 8 at addr ffff888020328380 by task udevd/4158
CPU: 1 PID: 4158 Comm: udevd Not tainted 5.18.0-rc3-syzkaller-00074-gb05a5683eba6-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
tcp_retransmit_timer+0x2ef3/0x3360 net/ipv4/tcp_timer.c:511
tcp_write_timer_handler+0x5e6/0xbc0 net/ipv4/tcp_timer.c:622
tcp_write_timer+0xa2/0x2b0 net/ipv4/tcp_timer.c:642
call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421
expire_timers kernel/time/timer.c:1466 [inline]
__run_timers.part.0+0x679/0xa80 kernel/time/timer.c:1737
__run_timers kernel/time/timer.c:1715 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1750
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
invoke_softirq kernel/softirq.c:432 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:637
irq_exit_rcu+0x5/0x20 kernel/softirq.c:649
sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
...
(detail report can be found in https://syzkaller.appspot.com/text?tag=CrashReport&x=15406b44f00000)
IMHO, the above issue is the same as this known one: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed,
and it doesn't seem to be related with SMC. The discussion about this known issue is ongoing and can be found in
https://lore.kernel.org/bpf/000000000000f75af905d3ba0716@google.com/T/.
And I added the temporary solution mentioned in the above discussion on
top of my two patches, the syzbot reproducer of 'slab-out-of-bounds/
use-after-free in smc_fback_error_report' no longer triggers any issue.
====================
syzbot reported a slab-out-of-bounds/use-after-free issue,
which was caused by accessing an already freed smc sock in
fallback-specific callback functions of clcsock.
This patch fixes the issue by restoring fallback-specific
callback functions to original ones and resetting clcsock
sk_user_data to NULL before freeing smc sock.
Meanwhile, this patch introduces sk_callback_lock to make
the access and assignment to sk_user_data mutually exclusive.
Reported-by: syzbot+b425899ed22c6943e00b@syzkaller.appspotmail.com Fixes: f3f628cf8745 ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Link: https://lore.kernel.org/r/00000000000013ca8105d7ae3ada@google.com/ Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/smc: Only save the original clcsock callback functions
Both listen and fallback process will save the current clcsock
callback functions and establish new ones. But if both of them
happen, the saved callback functions will be overwritten.
So this patch introduces some helpers to ensure that only save
the original callback functions of clcsock.
Fixes: f3f628cf8745 ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / kernel.git / log