value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: ce31671505e4 ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 11 Feb 2022 17:45:06 +0000 (19:45 +0200)]
net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
mv88e6xxx is special among DSA drivers in that it requires the VTU to
contain the VID of the FDB entry it modifies in
mv88e6xxx_port_db_load_purge(), otherwise it will return -EOPNOTSUPP.
Sometimes due to races this is not always satisfied even if external
code does everything right (first deletes the FDB entries, then the
VLAN), because DSA commits to hardware FDB entries asynchronously since
commit c536016beb20 ("net: dsa: Add support for learning FDB through
notification").
Therefore, the mv88e6xxx driver must close this race condition by
itself, by asking DSA to flush the switchdev workqueue of any FDB
deletions in progress, prior to exiting a VLAN.
Fixes: c536016beb20 ("net: dsa: Add support for learning FDB through notification") Reported-by: Rafael Richter <rafael.richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ignat Korchagin [Fri, 11 Feb 2022 17:30:42 +0000 (17:30 +0000)]
ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
Some time ago 5213af8b0a89 ("ipv6,mcast: always hold idev->lock before mca_lock")
switched ipv6_get_lladdr() to __ipv6_get_lladdr(), which is rcu-unsafe
version. That was OK, because idev->lock was held for these codepaths.
In 1913a80165c5 ("mld: convert ifmcaddr6 to RCU") these external locks were
removed, so we probably need to restore the original rcu-safe call.
Otherwise, we occasionally get a machine crashed/stalled with the following
in dmesg:
Fixes: 1913a80165c5 ("mld: convert ifmcaddr6 to RCU") Reported-by: David Pinilla Caparros <dpini@cloudflare.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Fri, 11 Feb 2022 17:14:18 +0000 (09:14 -0800)]
ice: enable parsing IPSEC SPI headers for RSS
The COMMS package can enable the hardware parser to recognize IPSEC
frames with ESP header and SPI identifier. If this package is available
and configured for loading in /lib/firmware, then the driver will
succeed in enabling this protocol type for RSS.
This in turn allows the hardware to hash over the SPI and use it to pick
a consistent receive queue for the same secure flow. Without this all
traffic is steered to the same queue for multiple traffic threads from
the same IP address. For that reason this is marked as a fix, as the
driver supports the model, but it wasn't enabled.
If the package is not available, adding this type will fail, but the
failure is ignored on purpose as it has no negative affect.
Fixes: 901ba7334f6a ("ice: Enable writing hardware filtering tables") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jeremy Kerr [Fri, 11 Feb 2022 01:15:52 +0000 (09:15 +0800)]
mctp: serial: Cancel pending work from ndo_uninit handler
We cannot do the cancel_work_sync from after the unregister_netdev, as
the dev pointer is no longer valid, causing a uaf on ldisc unregister
(or device close).
Instead, do the cancel_work_sync from the ndo_uninit op, where the dev
still exists, but the queue has stopped.
Fixes: 584bcfe236c0 ("mctp: serial: cancel tx work on ldisc close") Reported-by: Luo Likang <luolikang@nsfocus.com> Tested-by: Luo Likang <luolikang@nsfocus.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Link: https://lore.kernel.org/r/20220211011552.1861886-1-jk@codeconstruct.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mans Rullgard [Wed, 9 Feb 2022 14:54:54 +0000 (14:54 +0000)]
net: dsa: lan9303: fix reset on probe
The reset input to the LAN9303 chip is active low, and devicetree
gpio handles reflect this. Therefore, the gpio should be requested
with an initial state of high in order for the reset signal to be
asserted. Other uses of the gpio already use the correct polarity.
Fixes: 3bbb5663f4fc ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fianelil <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220209145454.19749-1-mans@mansr.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Fri, 11 Feb 2022 14:18:39 +0000 (14:18 +0000)]
Merge tag 'wireless-2022-02-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v5.17
Second set of fixes for v5.17. This is the first pull request with
both driver and stack patches.
Most important here are a regression fix for brcmfmac USB devices and
an iwlwifi fix for use after free when the firmware was missing. We
have new maintainers for ath9k and wcn36xx as well as ath6kl is now
orphaned. Also smaller fixes to iwlwifi and stack.
Eric Dumazet [Thu, 10 Feb 2022 17:13:31 +0000 (09:13 -0800)]
drop_monitor: fix data-race in dropmon_net_event / trace_napi_poll_hit
trace_napi_poll_hit() is reading stat->dev while another thread can write
on it from dropmon_net_event()
Use READ_ONCE()/WRITE_ONCE() here, RCU rules are properly enforced already,
we only have to take care of load/store tearing.
BUG: KCSAN: data-race in dropmon_net_event / trace_napi_poll_hit
write to 0xffff88816f3ab9c0 of 8 bytes by task 20260 on cpu 1:
dropmon_net_event+0xb8/0x2b0 net/core/drop_monitor.c:1579
notifier_call_chain kernel/notifier.c:84 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:392
call_netdevice_notifiers_info net/core/dev.c:1919 [inline]
call_netdevice_notifiers_extack net/core/dev.c:1931 [inline]
call_netdevice_notifiers net/core/dev.c:1945 [inline]
unregister_netdevice_many+0x867/0xfb0 net/core/dev.c:10415
ip_tunnel_delete_nets+0x24a/0x280 net/ipv4/ip_tunnel.c:1123
vti_exit_batch_net+0x2a/0x30 net/ipv4/ip_vti.c:515
ops_exit_list net/core/net_namespace.c:173 [inline]
cleanup_net+0x4dc/0x8d0 net/core/net_namespace.c:597
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
read to 0xffff88816f3ab9c0 of 8 bytes by interrupt on cpu 0:
trace_napi_poll_hit+0x89/0x1c0 net/core/drop_monitor.c:292
trace_napi_poll include/trace/events/napi.h:14 [inline]
__napi_poll+0x36b/0x3f0 net/core/dev.c:6366
napi_poll net/core/dev.c:6432 [inline]
net_rx_action+0x29e/0x650 net/core/dev.c:6519
__do_softirq+0x158/0x2de kernel/softirq.c:558
do_softirq+0xb1/0xf0 kernel/softirq.c:459
__local_bh_enable_ip+0x68/0x70 kernel/softirq.c:383
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x33/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:394 [inline]
ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline]
wg_packet_decrypt_worker+0x73c/0x780 drivers/net/wireguard/receive.c:506
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
value changed: 0xffff88815883e000 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 26435 Comm: kworker/0:1 Not tainted 5.17.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: wg-crypt-wg2 wg_packet_decrypt_worker
Fixes: 4a073519c3ec ("dropmon: add ability to detect when hardware dropsrxpackets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Wed, 9 Feb 2022 14:10:53 +0000 (22:10 +0800)]
net/smc: Avoid overwriting the copies of clcsock callback functions
The callback functions of clcsock will be saved and replaced during
the fallback. But if the fallback happens more than once, then the
copies of these callback functions will be overwritten incorrectly,
resulting in a loop call issue:
So this patch fixes the issue by saving these function pointers only
once in the fallback and avoiding overwriting.
Reported-by: syzbot+4de3c0e8a263e1e499bc@syzkaller.appspotmail.com Fixes: f3f628cf8745 ("net/smc: Forward wakeup to smc socket waitqueue after fallback") Link: https://lore.kernel.org/r/0000000000006d045e05d78776f6@google.com Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 11 Feb 2022 00:01:22 +0000 (16:01 -0800)]
Merge tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
Linus Torvalds [Thu, 10 Feb 2022 23:42:48 +0000 (15:42 -0800)]
Merge tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-time fixes to pidfd, clone3, and ir tests"
* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ir: fix build with ancient kernel headers
selftests: fixup build warnings in pidfd / clone3 tests
pidfd: fix test failure due to stack overflow on some arches
Linus Torvalds [Thu, 10 Feb 2022 23:39:59 +0000 (15:39 -0800)]
Merge tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fixes to the test and usage documentation"
* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Fix usage bug
kunit: fix missing f in f-string in run_checks.py
Hangbin Liu [Thu, 10 Feb 2022 09:50:56 +0000 (17:50 +0800)]
selftests: netfilter: disable rp_filter on router
Some distros may enable rp_filter by default. After ns1 change addr to
10.0.2.99 and set default router to 10.0.2.1, while the connected router
address is still 10.0.1.1. The router will not reply the arp request
from ns1. Fix it by setting the router's veth0 rp_filter to 0.
Before the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
Netns nsrouter-HQkDORO2 fib counter doesn't match expected packet count of 1 for 1.1.1.1
table inet filter {
chain prerouting {
type filter hook prerouting priority filter; policy accept;
ip daddr 1.1.1.1 fib saddr . iif oif missing counter packets 0 bytes 0 drop
ip6 daddr 1c3::c01d fib saddr . iif oif missing counter packets 0 bytes 0 drop
}
}
After the fix:
# ./nft_fib.sh
PASS: fib expression did not cause unwanted packet drops
PASS: fib expression did drop packets for 1.1.1.1
PASS: fib expression did drop packets for 1c3::c01d
Fixes: bc6f864c8e18 ("selftests: netfilter: add fib test case") Signed-off-by: Yi Chen <yiche@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Vladimir Oltean [Thu, 10 Feb 2022 17:40:17 +0000 (19:40 +0200)]
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something
allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus)
will free the memory backing the mdio_bus as well. Therefore, the
mdio_bus->list element is freed memory, but we continue to iterate
through the list of MDIO buses using that list element.
To fix this, use the proper list iterator that handles element deletion
by keeping a copy of the list element next pointer.
Fixes: 9163f0cd93fe ("net: dsa: mv88e6xxx: don't use devres for mdiobus") Reported-by: Rafael Richter <rafael.richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 10 Feb 2022 19:45:35 +0000 (11:45 -0800)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-10
Dan Carpenter propagates an error in FEC configuration.
Jesse fixes TSO offloads of IPIP and SIT frames.
Dave adds a dedicated LAG unregister function to resolve a KASAN error
and moves auxiliary device re-creation after LAG removal to the service
task to avoid issues with RTNL lock.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
====================
An ongoing workqueue populates the stats buffer. At the same time, a user
might query the statistics. While writing to the buffer is mutex-locked,
reading from the buffer wasn't. This could lead to buggy reads by ethtool.
This patch fixes the former blamed commit, but the bug was introduced in
the latter.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Fixes: e68a7b956f6dd ("ocelot: Clean up stats update deferred work") Fixes: 1bed22a67906a ("net: mscc: Add initial Ocelot switch support") Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dave Ertman [Fri, 21 Jan 2022 00:27:56 +0000 (16:27 -0800)]
ice: Avoid RTNL lock when re-creating auxiliary device
If a call to re-create the auxiliary device happens in a context that has
already taken the RTNL lock, then the call flow that recreates auxiliary
device can hang if there is another attempt to claim the RTNL lock by the
auxiliary driver.
To avoid this, any call to re-create auxiliary devices that comes from
an source that is holding the RTNL lock (e.g. netdev notifier when
interface exits a bond) should execute in a separate thread. To
accomplish this, add a flag to the PF that will be evaluated in the
service task and dealt with there.
Fixes: 142c9cadb44c ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dave Ertman [Tue, 18 Jan 2022 21:08:20 +0000 (13:08 -0800)]
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
Currently, the same handler is called for both a NETDEV_BONDING_INFO
LAG unlink notification as for a NETDEV_UNREGISTER call. This is
causing a problem though, since the netdev_notifier_info passed has
a different structure depending on which event is passed. The problem
manifests as a call trace from a BUG: KASAN stack-out-of-bounds error.
Fix this by creating a handler specific to NETDEV_UNREGISTER that only
is passed valid elements in the netdev_notifier_info struct for the
NETDEV_UNREGISTER event.
Also included is the removal of an unbalanced dev_put on the peer_netdev
and related braces.
Fixes: e4ee53917d88 ("ice: Respond to a NETDEV_UNREGISTER event for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jesse Brandeburg [Fri, 14 Jan 2022 23:38:39 +0000 (15:38 -0800)]
ice: fix IPIP and SIT TSO offload
The driver was avoiding offload for IPIP (at least) frames due to
parsing the inner header offsets incorrectly when trying to check
lengths.
This length check works for VXLAN frames but fails on IPIP frames
because skb_transport_offset points to the inner header in IPIP
frames, which meant the subtraction of transport_header from
inner_network_header returns a negative value (-20).
With the code before this patch, everything continued to work, but GSO
was being used to segment, causing throughputs of 1.5Gb/s per thread.
After this patch, throughput is more like 10Gb/s per thread for IPIP
traffic.
Fixes: ce27619d85aa ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dan Carpenter [Fri, 7 Jan 2022 08:02:06 +0000 (11:02 +0300)]
ice: fix an error code in ice_cfg_phy_fec()
Propagate the error code from ice_get_link_default_override() instead
of returning success.
Fixes: 41d02deef93d ("ice: add link lenient and default override support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
selftests: netfilter: synproxy test requires nf_conntrack
Otherwise, this test does not find the sysctl entry in place:
sysctl: cannot stat /proc/sys/net/netfilter/nf_conntrack_tcp_loose: No such file or directory
iperf3: error - unable to send control message: Bad file descriptor
FAIL: iperf3 returned an error
Victor Erminpour [Thu, 10 Feb 2022 00:28:38 +0000 (16:28 -0800)]
net: mpls: Fix GCC 12 warning
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable outside the switch, which silences the warning:
./net/mpls/af_mpls.c:1624:21: error: statement will never be executed [-Werror=switch-unreachable]
1624 | int err;
| ^~~
Signed-off-by: Victor Erminpour <victor.erminpour@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dpaa2-eth: unregister the netdev before disconnecting from the PHY
The netdev should be unregistered before we are disconnecting from the
MAC/PHY so that the dev_close callback is called and the PHY and the
phylink workqueues are actually stopped before we are disconnecting and
destroying the phylink instance.
Fixes: b96dc6eb861b ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Marc St-Amand [Wed, 9 Feb 2022 09:43:25 +0000 (15:13 +0530)]
net: macb: Align the dma and coherent dma masks
Single page and coherent memory blocks can use different DMA masks
when the macb accesses physical memory directly. The kernel is clever
enough to allocate pages that fit into the requested address width.
When using the ARM SMMU, the DMA mask must be the same for single
pages and big coherent memory blocks. Otherwise the translation
tables turn into one big mess.
[ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
[ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
[ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
[ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
Since using the same DMA mask does not hurt direct 1:1 physical
memory mappings, this commit always aligns DMA and coherent masks.
Signed-off-by: Marc St-Amand <mstamand@ciena.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 10 Feb 2022 13:43:43 +0000 (05:43 -0800)]
Merge tag 'audit-pr-20220209' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"Another audit fix, this time a single rather small but important fix
for an oops/page-fault caused by improperly accessing userspace
memory"
* tag 'audit-pr-20220209' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: don't deref the syscall args when checking the openat2 open_how::flags
Jon Maloy [Sat, 5 Feb 2022 19:11:18 +0000 (14:11 -0500)]
tipc: improve size validations for received domain records
The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.
This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.
tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16. To
avert any risk of bit overflow, we add an extra sanity check for this in
that function. We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer. This potential problem was identified by Eric Dumazet.
This fixes CVE-2022-0435
Reported-by: Samuel Page <samuel.page@appgate.com> Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 4f74945a364d ("tipc: add neighbor monitoring framework") Signed-off-by: Jon Maloy <jmaloy@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Samuel Page <samuel.page@appgate.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Berg [Tue, 8 Feb 2022 10:47:30 +0000 (11:47 +0100)]
iwlwifi: fix use-after-free
If no firmware was present at all (or, presumably, all of the
firmware files failed to parse), we end up unbinding by calling
device_release_driver(), which calls remove(), which then in
iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However
the new code I added will still erroneously access it after it
was freed.
Set 'failure=false' in this case to avoid the access, all data
was already freed anyway.
Cc: stable@vger.kernel.org Reported-by: Stefan Agner <stefan@agner.ch> Reported-by: Wolfgang Walter <linux@stwm.de> Reported-by: Jason Self <jason@bluehome.net> Reported-by: Dominik Behr <dominik@dominikbehr.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Fixes: 7747dc7d83d8 ("iwlwifi: fix leaks/bad data after failed firmware load") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid
Matthieu Baerts [Thu, 10 Feb 2022 01:25:07 +0000 (17:25 -0800)]
selftests: mptcp: add missing join check
This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 32671cc3faae ("selftests: mptcp: add_addr and echo race test") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Slark Xiao [Wed, 9 Feb 2022 02:47:17 +0000 (10:47 +0800)]
net: usb: qmi_wwan: Add support for Dell DW5829e
Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:
Paul Moore [Wed, 9 Feb 2022 19:49:38 +0000 (14:49 -0500)]
audit: don't deref the syscall args when checking the openat2 open_how::flags
As reported by Jeff, dereferencing the openat2 syscall argument in
audit_match_perm() to obtain the open_how::flags can result in an
oops/page-fault. This patch fixes this by using the open_how struct
that we store in the audit_context with audit_openat2_how().
Independent of this patch, Richard Guy Briggs posted a similar patch
to the audit mailing list roughly 40 minutes after this patch was
posted.
Cc: stable@vger.kernel.org Fixes: e1818c914d97 ("audit: add support for the openat2 syscall") Reported-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
Linus Torvalds [Wed, 9 Feb 2022 17:56:57 +0000 (09:56 -0800)]
Merge tag 'nfsd-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd fixes from Chuck Lever:
"Ensure that NFS clients cannot send file size or offset values that
can cause the NFS server to crash or to return incorrect or surprising
results.
In particular, fix how the NFS server handles values larger than
OFFSET_MAX"
* tag 'nfsd-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Deprecate NFS_OFFSET_MAX
NFSD: Fix offset type in I/O trace points
NFSD: COMMIT operations must not return NFS?ERR_INVAL
NFSD: Clamp WRITE offsets
NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes
NFSD: Fix ia_size underflow
NFSD: Fix the behavior of READ near OFFSET_MAX
Fix regression due to "fs: move binfmt_misc sysctl to its own file"
Commit fc3b58422b84 ("fs: move binfmt_misc sysctl to its own file") did
not go unnoticed, binfmt-support stopped to work on my Debian system
since v5.17-rc2 (did not check with -rc1).
The existance of the /proc/sys/fs/binfmt_misc is a precondition for
attempting to mount the binfmt_misc fs, which in turn triggers the
autoload of the binfmt_misc module. Without it, no module is loaded and
no binfmt is available at boot.
Building as built-in or manually loading the module and mounting the fs
works fine, it's therefore only a matter of interaction with user-space.
I could try to improve the Debian systemd configuration but I can't say
anything about the other distributions.
This patch restores a working system right after boot.
Fixes: fc3b58422b84 ("fs: move binfmt_misc sysctl to its own file") Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chuck Lever [Tue, 25 Jan 2022 20:57:45 +0000 (15:57 -0500)]
NFSD: Deprecate NFS_OFFSET_MAX
NFS_OFFSET_MAX was introduced way back in Linux v2.3.y before there
was a kernel-wide OFFSET_MAX value. As a clean up, replace the last
few uses of it with its generic equivalent, and get rid of it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Mon, 24 Jan 2022 20:50:31 +0000 (15:50 -0500)]
NFSD: COMMIT operations must not return NFS?ERR_INVAL
Since, well, forever, the Linux NFS server's nfsd_commit() function
has returned nfserr_inval when the passed-in byte range arguments
were non-sensical.
However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests
are permitted to return only the following non-zero status codes:
NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL
is not listed in the COMMIT row of Table 6 in RFC 8881.
RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not
specify when it can or should be used.
Instead of dropping or failing a COMMIT request in a byte range that
is not supported, turn it into a valid request by treating one or
both arguments as zero. Offset zero means start-of-file, count zero
means until-end-of-file, so we only ever extend the commit range.
NFS servers are always allowed to commit more and sooner than
requested.
The range check is no longer bounded by NFS_OFFSET_MAX, but rather
by the value that is returned in the maxfilesize field of the NFSv3
FSINFO procedure or the NFSv4 maxfilesize file attribute.
Note that this change results in a new pynfs failure:
CMT4 st_commit.testCommitOverflow : RUNNING
CMT4 st_commit.testCommitOverflow : FAILURE
COMMIT with offset + count overflow should return
NFS4ERR_INVAL, instead got NFS4_OK
IMO the test is not correct as written: RFC 8881 does not allow the
COMMIT operation to return NFS4ERR_INVAL.
Reported-by: Dan Aloni <dan.aloni@vastdata.com> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Bruce Fields <bfields@fieldses.org>
Chuck Lever [Tue, 25 Jan 2022 21:36:22 +0000 (16:36 -0500)]
NFSD: Clamp WRITE offsets
Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Tue, 25 Jan 2022 20:59:57 +0000 (15:59 -0500)]
NFSD: Fix NFSv3 SETATTR/CREATE's handling of large file sizes
iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.
Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().
Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Mon, 31 Jan 2022 18:01:53 +0000 (13:01 -0500)]
NFSD: Fix ia_size underflow
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().
Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Fri, 4 Feb 2022 20:19:34 +0000 (15:19 -0500)]
NFSD: Fix the behavior of READ near OFFSET_MAX
Dan Aloni reports:
> Due to commit d0ee149acef0 ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
David S. Miller [Wed, 9 Feb 2022 13:33:39 +0000 (13:33 +0000)]
Merge branch 'vlan-QinQ-leak-fix'
Xin Long says:
====================
vlan: fix a netdev refcnt leak for QinQ
This issue can be simply reproduced by:
# ip link add dummy0 type dummy
# ip link add link dummy0 name dummy0.1 type vlan id 1
# ip link add link dummy0.1 name dummy0.1.2 type vlan id 2
# rmmod 8021q
unregister_netdevice: waiting for dummy0.1 to become free. Usage count = 1
So as to fix it, adjust vlan_dev_uninit() in Patch 1/1 so that it won't
be called twice for the same device, then do the fix in vlan_dev_uninit()
in Patch 2/2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 9 Feb 2022 08:19:56 +0000 (03:19 -0500)]
vlan: move dev_put into vlan_dev_uninit
Shuang Li reported an QinQ issue by simply doing:
# ip link add dummy0 type dummy
# ip link add link dummy0 name dummy0.1 type vlan id 1
# ip link add link dummy0.1 name dummy0.1.2 type vlan id 2
# rmmod 8021q
unregister_netdevice: waiting for dummy0.1 to become free. Usage count = 1
When rmmods 8021q, all vlan devs are deleted from their real_dev's vlan grp
and added into list_kill by unregister_vlan_dev(). dummy0.1 is unregistered
before dummy0.1.2, as it's using for_each_netdev() in __rtnl_kill_links().
When unregisters dummy0.1, dummy0.1.2 is not unregistered in the event of
NETDEV_UNREGISTER, as it's been deleted from dummy0.1's vlan grp. However,
due to dummy0.1.2 still holding dummy0.1, dummy0.1 will keep waiting in
netdev_wait_allrefs(), while dummy0.1.2 will never get unregistered and
release dummy0.1, as it delays dev_put until calling dev->priv_destructor,
vlan_dev_free().
This issue was introduced by Commit dd5b14519583 ("net: vlan: fix a UAF in
vlan_dev_real_dev()"), and this patch is to fix it by moving dev_put() into
vlan_dev_uninit(), which is called after NETDEV_UNREGISTER event but before
netdev_wait_allrefs().
Fixes: dd5b14519583 ("net: vlan: fix a UAF in vlan_dev_real_dev()") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 9 Feb 2022 08:19:55 +0000 (03:19 -0500)]
vlan: introduce vlan_dev_free_egress_priority
This patch is to introduce vlan_dev_free_egress_priority() to
free egress priority for vlan dev, and keep vlan_dev_uninit()
static as .ndo_uninit. It makes the code more clear and safer
when adding new code in vlan_dev_uninit() in the future.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Duoming Zhou [Wed, 9 Feb 2022 12:53:45 +0000 (20:53 +0800)]
ax25: fix UAF bugs of net_device caused by rebinding operation
The ax25_kill_by_device() will set s->ax25_dev = NULL and
call ax25_disconnect() to change states of ax25_cb and
sock, if we call ax25_bind() before ax25_kill_by_device().
However, if we call ax25_bind() again between the window of
ax25_kill_by_device() and ax25_dev_device_down(), the values
and states changed by ax25_kill_by_device() will be reassigned.
Finally, ax25_dev_device_down() will deallocate net_device.
If we dereference net_device in syscall functions such as
ax25_release(), ax25_sendmsg(), ax25_getsockopt(), ax25_getname()
and ax25_info_show(), a UAF bug will occur.
One of the possible race conditions is shown below:
the corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in ax25_send_control+0x43/0x210
...
Call Trace:
...
ax25_send_control+0x43/0x210
ax25_release+0x2db/0x3b0
__sock_release+0x6d/0x120
sock_close+0xf/0x20
__fput+0x11f/0x420
...
Allocated by task 1283:
...
__kasan_kmalloc+0x81/0xa0
alloc_netdev_mqs+0x5a/0x680
mkiss_open+0x6c/0x380
tty_ldisc_open+0x55/0x90
...
Freed by task 1969:
...
kfree+0xa3/0x2c0
device_release+0x54/0xe0
kobject_put+0xa5/0x120
tty_ldisc_kill+0x3e/0x80
...
In order to fix these UAF bugs caused by rebinding operation,
this patch adds dev_hold_track() into ax25_bind() and
corresponding dev_put_track() into ax25_kill_by_device().
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 9 Feb 2022 12:04:33 +0000 (14:04 +0200)]
net: dsa: fix panic when DSA master device unbinds on shutdown
Rafael reports that on a system with LX2160A and Marvell DSA switches,
if a reboot occurs while the DSA master (dpaa2-eth) is up, the following
panic can be seen:
It can be seen from the stack trace that the problem is that the
deregistration of the master causes a dev_close(), which gets notified
as NETDEV_GOING_DOWN to dsa_slave_netdevice_event().
But dsa_switch_shutdown() has already run, and this has unregistered the
DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to
call dev_close_many() on those slave interfaces, leading to the problem.
The previous attempt to avoid the NETDEV_GOING_DOWN on the master after
dsa_switch_shutdown() was called seems improper. Unregistering the slave
interfaces is unnecessary and unhelpful. Instead, after the slaves have
stopped being uppers of the DSA master, we can now reset to NULL the
master->dsa_ptr pointer, which will make DSA start ignoring all future
notifier events on the master.
Fixes: db3f4e7cb878 ("net: dsa: be compatible with masters which unregister on shutdown") Reported-by: Rafael Richter <rafael.richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Originally we proposed a new hdmi-5v-supply regulator reference
for CI20 device tree but that was superseded by a better idea to use
the already defined "ddc-en-gpios" property of the "hdmi-connector".
Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already
been applied to v5.17-rc1, we add this on top.
Fixes: a1c9a7328b41 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Raju Rangoju [Wed, 9 Feb 2022 04:32:01 +0000 (10:02 +0530)]
net: amd-xgbe: disable interrupts during pci removal
Hardware interrupts are enabled during the pci probe, however,
they are not disabled during pci removal.
Disable all hardware interrupts during pci removal to avoid any
issues.
Fixes: 9079c06fc421 ("amd-xgbe: Update PCI support to use new IRQ functions") Suggested-by: Selwin Sebastian <Selwin.Sebastian@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Wed, 9 Feb 2022 03:22:37 +0000 (22:22 -0500)]
tipc: rate limit warning for received illegal binding update
It would be easy to craft a message containing an illegal binding table
update operation. This is handled correctly by the code, but the
corresponding warning printout is not rate limited as is should be.
We fix this now.
Fixes: 082dc377e86b ("[TIPC] Initial merge") Signed-off-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 31d56b3f9077 ("net: phy: Add mdio-aspeed") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: ffd7d0cab044 ("veth: Add driver XDP") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Duoming Zhou [Tue, 8 Feb 2022 15:40:00 +0000 (23:40 +0800)]
ax25: fix NPD bug in ax25_disconnect
The ax25_disconnect() in ax25_kill_by_device() is not
protected by any locks, thus there is a race condition
between ax25_disconnect() and ax25_destroy_socket().
when ax25->sk is assigned as NULL by ax25_destroy_socket(),
a NULL pointer dereference bug will occur if site (1) or (2)
dereferences ax25->sk.
David S. Miller [Wed, 9 Feb 2022 11:41:48 +0000 (11:41 +0000)]
Merge branch 'net-fix-skb-unclone-issues'
Antoine Tenart says:
====================
net: fix issues when uncloning an skb dst+metadata
This fixes two issues when uncloning an skb dst+metadata in
tun_dst_unclone; this was initially reported by Vlad Buslov[1]. Because
of the memory leak fixed by patch 2, the issue in patch 1 never happened
in practice.
tun_dst_unclone is called from two different places, one in geneve/vxlan
to handle PMTU and one in net/openvswitch/actions.c where it is used to
retrieve tunnel information. While both Vlad and I tested the former, we
could not for the latter. I did spend quite some time trying to, but
that code path is not easy to trigger. Code inspection shows this should
be fine, the tunnel information (dst+metadata) is uncloned and the skb
it is referenced from is only consumed after all accesses to the tunnel
information are done:
do_execute_actions
output_userspace
dev_fill_metadata_dst <- dst+metadata is uncloned
ovs_dp_upcall
queue_userspace_packet
ovs_nla_put_tunnel_info <- metadata (tunnel info) is accessed
consume_skb <- dst+metadata is freed
Antoine Tenart [Mon, 7 Feb 2022 17:13:19 +0000 (18:13 +0100)]
net: fix a memleak when uncloning an skb dst and its metadata
When uncloning an skb dst and its associated metadata, a new
dst+metadata is allocated and later replaces the old one in the skb.
This is helpful to have a non-shared dst+metadata attached to a specific
skb.
The issue is the uncloned dst+metadata is initialized with a refcount of
1, which is increased to 2 before attaching it to the skb. When
tun_dst_unclone returns, the dst+metadata is only referenced from a
single place (the skb) while its refcount is 2. Its refcount will never
drop to 0 (when the skb is consumed), leading to a memory leak.
Fix this by removing the call to dst_hold in tun_dst_unclone, as the
dst+metadata refcount is already 1.
Fixes: cecd887561fa ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@ovn.org> Reported-by: Vlad Buslov <vladbu@nvidia.com> Tested-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Mon, 7 Feb 2022 17:13:18 +0000 (18:13 +0100)]
net: do not keep the dst cache when uncloning an skb dst and its metadata
When uncloning an skb dst and its associated metadata a new dst+metadata
is allocated and the tunnel information from the old metadata is copied
over there.
The issue is the tunnel metadata has references to cached dst, which are
copied along the way. When a dst+metadata refcount drops to 0 the
metadata is freed including the cached dst entries. As they are also
referenced in the initial dst+metadata, this ends up in UaFs.
In practice the above did not happen because of another issue, the
dst+metadata was never freed because its refcount never dropped to 0
(this will be fixed in a subsequent patch).
Fix this by initializing the dst cache after copying the tunnel
information from the old metadata to also unshare the dst cache.
Fixes: 186f60f16459 ("net: add dst_cache to ovs vxlan lwtunnel") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: Vlad Buslov <vladbu@nvidia.com> Tested-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Wed, 9 Feb 2022 08:25:51 +0000 (16:25 +0800)]
selftests: netfilter: fix exit value for nft_concat_range
When the nft_concat_range test failed, it exit 1 in the code
specifically.
But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.
Fixes: 2a315bb252e0 ("selftests: netfilter: Introduce tests for sets with range concatenation") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric Dumazet [Wed, 9 Feb 2022 02:30:43 +0000 (18:30 -0800)]
netfilter: xt_socket: fix a typo in socket_mt_destroy()
Calling nf_defrag_ipv4_disable() instead of nf_defrag_ipv6_disable()
was probably not the intent.
I found this by code inspection, while chasing a possible issue in TPROXY.
Fixes: 9d09fa1d045d ("netfilter: disable defrag once its no longer needed") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Oliver Hartkopp [Wed, 9 Feb 2022 07:36:01 +0000 (08:36 +0100)]
can: isotp: fix error path in isotp_sendmsg() to unlock wait queue
Commit 351c22bce6d2 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent
access in isotp_sendmsg()") introduced a new locking scheme that may render
the userspace application in a locking state when an error is detected.
This issue shows up under high load on simultaneously running isotp channels
with identical configuration which is against the ISO specification and
therefore breaks any reasonable PDU communication anyway.
Fixes: 351c22bce6d2 ("can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()") Link: https://lore.kernel.org/all/20220209073601.25728-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Cc: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Tue, 8 Feb 2022 20:00:26 +0000 (21:00 +0100)]
can: isotp: fix potential CAN frame reception race in isotp_rcv()
When receiving a CAN frame the current code logic does not consider
concurrently receiving processes which do not show up in real world
usage.
Ziyang Xuan writes:
The following syz problem is one of the scenarios. so->rx.len is
changed by isotp_rcv_ff() during isotp_rcv_cf(), so->rx.len equals
0 before alloc_skb() and equals 4096 after alloc_skb(). That will
trigger skb_over_panic() in skb_put().
Therefore we make sure the state changes and data structures stay
consistent at CAN frame reception time by adding a spin_lock in
isotp_rcv(). This fixes the issue reported by syzkaller but does not
affect real world operation.
Louis Peens [Tue, 8 Feb 2022 10:14:53 +0000 (11:14 +0100)]
nfp: flower: fix ida_idx not being released
When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT
that gets set if nfp_flower_is_supported_bridge is true is not taken
into account. Consequently the path that should release the ida_index
in cleanup is never triggered, causing messages like:
nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex.
after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to
new tunnel flows not being offloaded.
Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if
the port is of type OTHER.
Fixes: 3493d5205f48 ("nfp: flower: encode mac indexes with pre-tunnel rule check") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.
If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.
This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:
====================
More DSA fixes for devres + mdiobus_{alloc,register}
The initial patch series "[net,0/2] Fix mdiobus users with devres"
https://patchwork.kernel.org/project/netdevbpf/cover/20210920214209.1733768-1-vladimir.oltean@nxp.com/
fixed some instances where DSA drivers on slow buses (SPI, I2C) trigger
a panic (changed since then to a warn) in mdiobus_free. That was due to
devres calling mdiobus_free() with no prior mdiobus_unregister(), which
again was due to commit fade4e2be273 ("net: phy: don't abuse devres in
devm_mdiobus_register()") by Bartosz Golaszewski.
Rafael Richter and Daniel Klauer report yet another variation on that
theme, but this time it applies to any DSA switch driver, not just those
on buses which have a "->shutdown() calls ->remove() which unregisters
children" sequence.
Their setup is that of an LX2160A DPAA2 SoC driving a Marvell DSA switch
(MDIO). DPAA2 Ethernet drivers probe on the "fsl-mc" bus
(drivers/bus/fsl-mc/fsl-mc-bus.c). This bus is meant to be the
kernel-side representation of the networking objects kept by the
Management Complex (MC) firmware.
which proceeds to remove the children on the bus. Among those children,
the dpaa2-eth network driver.
When dpaa2-eth is a DSA master, this removal of the master on shutdown
trips up the device link created by dsa_master_setup(), and as such, the
Marvell switch is also removed.
From this point on, readers can revisit the description of commits 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
since the prerequisites for the BUG_ON in mdiobus_free() have been
accomplished if there is a devres mismatch between mdiobus_alloc() and
mdiobus_register().
Most DSA drivers have this kind of mismatch, and upon my initial
assessment I had not realized the possibility described above, so I
didn't fix it. This patch series walks through all drivers and makes
them use either fully devres, or no devres.
I am aware that there are DSA drivers that are only known to be tested
with a single DSA master, so some patches are probably overkill for
them. But code is copy-pasted from so many sources without fully
understanding the differences, that I think it's better to not leave an
in-tree source of inspiration that may lead to subtle breakage if not
adapted properly.
====================
Vladimir Oltean [Mon, 7 Feb 2022 16:15:53 +0000 (18:15 +0200)]
net: dsa: lantiq_gswip: don't use devres for mdiobus
As explained in commits: 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes: fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:52 +0000 (18:15 +0200)]
net: dsa: mt7530: fix kernel bug in mdiobus_free() when unbinding
Nobody in this driver calls mdiobus_unregister(), which is necessary if
mdiobus_register() completes successfully. So if the devres callbacks
that free the mdiobus get invoked (this is the case when unbinding the
driver), mdiobus_free() will BUG if the mdiobus is still registered,
which it is.
My speculation is that this is due to the fact that prior to commit fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()")
from June 2020, _devm_mdiobus_free() used to call mdiobus_unregister().
But at the time that the mt7530 support was introduced in May 2021, the
API was already changed. It's therefore likely that the blamed patch was
developed on an older tree, and incorrectly adapted to net-next. This
makes the Fixes: tag correct.
Fix the problem by using the devres variant of mdiobus_register.
Fixes: b298a6ab38e3 ("net: dsa: mt7530: add interrupt support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:51 +0000 (18:15 +0200)]
net: dsa: seville: register the mdiobus under devres
As explained in commits: 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Seville VSC9959 switch is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the seville switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The seville driver has a code structure that could accommodate both the
mdiobus_unregister and mdiobus_free calls, but it has an external
dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls
devm_mdiobus_alloc_size() on its behalf. So rather than restructuring
that, and exporting yet one more symbol mscc_miim_teardown(), let's work
with devres and replace of_mdiobus_register with the devres variant.
When we use all-devres, we can ensure that devres doesn't free a
still-registered bus (it either runs both callbacks, or none).
Fixes: fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:50 +0000 (18:15 +0200)]
net: dsa: felix: don't use devres for mdiobus
As explained in commits: 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Felix VSC9959 switch is a PCI device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the felix switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The felix driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc_size() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes: fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:49 +0000 (18:15 +0200)]
net: dsa: bcm_sf2: don't use devres for mdiobus
As explained in commits: 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The Starfighter 2 is a platform device, so the initial set of
constraints that I thought would cause this (I2C or SPI buses which call
->remove on ->shutdown) do not apply. But there is one more which
applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the bcm_sf2 switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The bcm_sf2 driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.
Fixes: fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:48 +0000 (18:15 +0200)]
net: dsa: ar9331: register the mdiobus under devres
As explained in commits: 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The ar9331 is an MDIO device, so the initial set of constraints that I
thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the ar9331 switch driver on shutdown.
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The ar9331 driver doesn't have a complex code structure for mdiobus
removal, so just replace of_mdiobus_register with the devres variant in
order to be all-devres and ensure that we don't free a still-registered
bus.
Fixes: fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Mon, 7 Feb 2022 16:15:47 +0000 (18:15 +0200)]
net: dsa: mv88e6xxx: don't use devres for mdiobus
As explained in commits: 5e50a6cf1d83 ("net: dsa: realtek: register the MDIO bus under devres") 985b21caec19 ("net: dsa: don't allocate the slave_mii_bus using devres")
mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.
The mv88e6xxx is an MDIO device, so the initial set of constraints that
I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.
If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the Marvell switch driver on shutdown.
systemd-shutdown[1]: Powering off.
mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down
fsl-mc dpbp.9: Removing from iommu group 7
fsl-mc dpbp.8: Removing from iommu group 7
------------[ cut here ]------------
kernel BUG at drivers/net/phy/mdio_bus.c:677!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15
pc : mdiobus_free+0x44/0x50
lr : devm_mdiobus_free+0x10/0x20
Call trace:
mdiobus_free+0x44/0x50
devm_mdiobus_free+0x10/0x20
devres_release_all+0xa0/0x100
__device_release_driver+0x190/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x4c/0x220
device_release_driver_internal+0xac/0xb0
device_links_unbind_consumers+0xd4/0x100
__device_release_driver+0x94/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_device_remove+0x24/0x40
__fsl_mc_device_remove+0xc/0x20
device_for_each_child+0x58/0xa0
dprc_remove+0x90/0xb0
fsl_mc_driver_remove+0x20/0x5c
__device_release_driver+0x21c/0x220
device_release_driver+0x28/0x40
bus_remove_device+0x118/0x124
device_del+0x174/0x420
fsl_mc_bus_remove+0x80/0x100
fsl_mc_bus_shutdown+0xc/0x1c
platform_shutdown+0x20/0x30
device_shutdown+0x154/0x330
kernel_power_off+0x34/0x6c
__do_sys_reboot+0x15c/0x250
__arm64_sys_reboot+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x4c/0x150
el0_svc+0x24/0xb0
el0t_64_sync_handler+0xa8/0xb0
el0t_64_sync+0x178/0x17c
So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.
The Marvell driver already has a good structure for mdiobus removal, so
just plug in mdiobus_free and get rid of devres.
Fixes: fade4e2be273 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Rafael Richter <Rafael.Richter@gin.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Daniel Klauer <daniel.klauer@gin.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mahesh Bandewar [Mon, 7 Feb 2022 22:29:01 +0000 (14:29 -0800)]
bonding: pair enable_port with slave_arr_updates
When 803.2ad mode enables a participating port, it should update
the slave-array. I have observed that the member links are participating
and are part of the active aggregator while the traffic is egressing via
only one member link (in a case where two links are participating). Via
kprobes I discovered that slave-arr has only one link added while
the other participating link wasn't part of the slave-arr.
I couldn't see what caused that situation but the simple code-walk
through provided me hints that the enable_port wasn't always associated
with the slave-array update.
Fixes: af59b16be455 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NeilBrown [Mon, 17 Jan 2022 05:36:53 +0000 (16:36 +1100)]
SUNRPC: lock against ->sock changing during sysfs read
->sock can be set to NULL asynchronously unless ->recv_mutex is held.
So it is important to hold that mutex. Otherwise a sysfs read can
trigger an oops.
Commit 9f759263746a ("SUNRPC: Check if the xprt is connected before
handling sysfs reads") appears to attempt to fix this problem, but it
only narrows the race window.
Fixes: 9f759263746a ("SUNRPC: Check if the xprt is connected before handling sysfs reads") Fixes: ea56a96d4f9a ("SUNRPC query transport's source port") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add the description of @server and @fhandle, and remove the excess
@inode in nfs4_proc_get_locations() kernel-doc comment to remove
warnings found by running scripts/kernel-doc, which is caused by
using 'make W=1'.
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'server'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Function parameter or member 'fhandle'
not described in 'nfs4_proc_get_locations'
fs/nfs/nfs4proc.c:8219: warning: Excess function parameter 'inode'
description in 'nfs4_proc_get_locations'
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Dan Aloni [Tue, 25 Jan 2022 20:06:46 +0000 (22:06 +0200)]
xprtrdma: fix pointer derefs in error cases of rpcrdma_ep_create
If there are failures then we must not leave the non-NULL pointers with
the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries
free them, resulting in an Oops.
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trond Myklebust [Wed, 2 Feb 2022 23:52:01 +0000 (18:52 -0500)]
NFS: Fix initialisation of nfs_client cl_flags field
For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().
Fixes: 7b9744db9509 ("NFSv4: Initialise connection to the server in nfs4_alloc_client()") Cc: stable@vger.kernel.org # 4.8.x Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
Cc: stable@vger.kernel.org Fixes: 84d7d7d94488 ("net: phy: marvell: Avoid unnecessary soft reset") Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 7 Feb 2022 23:25:50 +0000 (15:25 -0800)]
Merge tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- NTLMSSP authentication improvement
- RDMA (smbdirect) fix allowing broader set of NICs to be supported
- improved buffer validation
- additional small fixes, including a posix extensions fix for stable
* tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for key exchange
ksmbd: reduce smb direct max read/write size
ksmbd: don't align last entry offset in smb2 query directory
ksmbd: fix same UniqueId for dot and dotdot entries
ksmbd: smbd: validate buffer descriptor structures
ksmbd: fix SMB 3.11 posix extension mount failure
* tag 'mmc-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
moxart: fix potential use-after-free on remove path
mmc: core: Wait for command setting 'Power Off Notification' bit to complete
mmc: sh_mmcif: Check for null res pointer
mmc: sdhci-of-esdhc: Check for error num after setting mask
Linus Torvalds [Mon, 7 Feb 2022 17:55:14 +0000 (09:55 -0800)]
Merge tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Fixes for recently found bugs.
One was found/noticed while reviewing IMA support for fsverity digests
and signatures. Two of them were found/noticed while working on IMA
namespacing. Plus two other bugs.
All of them are for previous kernel releases"
* tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Do not print policy rule with inactive LSM labels
ima: Allow template selection with ima_template[_fmt]= after ima_hash=
ima: Remove ima_policy file before directory
integrity: check the return value of audit_log_start()
ima: fix reference leak in asymmetric_verify()
Damien Le Moal [Mon, 7 Feb 2022 02:27:53 +0000 (11:27 +0900)]
ata: libata-core: Fix ata_dev_config_cpr()
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: 863b1191e29c ("libata: support concurrent positioning ranges log") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519 Cc: stable@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Abderraouf Adjal <adjal.arf@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Eric Dumazet [Sun, 6 Feb 2022 14:33:48 +0000 (06:33 -0800)]
net/smc: use GFP_ATOMIC allocation in smc_pnet_add_eth()
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: a9e29fdf3aed ("net/smc: fix ref_tracker issue in smc_pnet_add()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 6 Feb 2022 18:34:45 +0000 (10:34 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4 fast commit and inline data handling.
Also fix regression introduced as part of moving to the new mount API"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs/ext4: fix comments mentioning i_mutex
ext4: fix incorrect type issue during replay_del_range
jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()
ext4: fix potential NULL pointer dereference in ext4_fill_super()
jbd2: refactor wait logic for transaction updates into a common function
jbd2: cleanup unused functions declarations from jbd2.h
ext4: fix error handling in ext4_fc_record_modified_inode()
ext4: remove redundant max inline_size check in ext4_da_write_inline_data_begin()
ext4: fix error handling in ext4_restore_inline_data()
ext4: fast commit may miss file actions
ext4: fast commit may not fallback for ineligible commit
ext4: modify the logic of ext4_mb_new_blocks_simple
ext4: prevent used blocks from being allocated during fast commit replay
Linus Torvalds [Sun, 6 Feb 2022 18:18:23 +0000 (10:18 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix display of grouped aliased events in 'perf stat'.
- Add missing branch_sample_type to perf_event_attr__fprintf().
- Apply correct label to user/kernel symbols in branch mode.
- Fix 'perf ftrace' system_wide tracing, it has to be set before
creating the maps.
- Return error if procfs isn't mounted for PID namespaces when
synthesizing records for pre-existing processes.
- Set error stream of objdump process for 'perf annotate' TUI, to avoid
garbling the screen.
- Add missing arm64 support to perf_mmap__read_self(), the kernel part
got into 5.17.
- Check for NULL pointer before dereference writing debug info about a
sample.
- Update UAPI copies for asound, perf_event, prctl and kvm headers.
- Fix a typo in bpf_counter_cgroup.c.
* tag 'perf-tools-fixes-for-v5.17-2022-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf ftrace: system_wide collection is not effective by default
libperf: Add arm64 support to perf_mmap__read_self()
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf stat: Fix display of grouped aliased events
perf tools: Apply correct label to user/kernel symbols in branch mode
perf bpf: Fix a typo in bpf_counter_cgroup.c
perf synthetic-events: Return error if procfs isn't mounted for PID namespaces
perf session: Check for NULL pointer before dereference
perf annotate: Set error stream of objdump process for TUI
perf tools: Add missing branch_sample_type to perf_event_attr__fprintf()
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf beauty: Make the prctl arg regexp more strict to cope with PR_SET_VMA
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
projects / kernel.git / log