net: dsa: bcm_sf2: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the bcm_sf2
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII and Reverse MII links is
handled within phylink_generic_validate() in phylink, so there is no
need to make them conditional on the interface mode in the driver.
Thanks to Florian Fainelli for suggesting how to populate the supported
interfaces.
net: dsa: ar9331: convert to phylink_generic_validate()
Populate the supported interfaces and MAC capabilities for the AR9331
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 3 Feb 2022 11:44:08 +0000 (11:44 +0000)]
Merge branch 'mptcp-next'
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.18
Patch 1 has some minor cleanup in mptcp_write_options().
Patch 2 moves a rarely-needed branch to optimize mptcp_write_options().
Patch 3 adds a comment explaining which combinations of MPTCP option
headers are expected.
Patch 4 adds a pr_debug() for the MPTCP_RST option.
Patches 5-7 allow setting MPTCP_PM_ADDR_FLAG_FULLMESH with the "set
flags" netlink command. This allows changing the behavior of existing
path manager endpoints. The flag was previously only set at endpoint
creation time. Associated selftests also updated.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:43 +0000 (17:03 -0800)]
selftests: mptcp: add fullmesh setting tests
This patch added the fullmesh setting and clearing selftests in
mptcp_join.sh.
Now we can set both backup and fullmesh flags, so avoid using the
words 'backup' and 'bkup'.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:42 +0000 (17:03 -0800)]
selftests: mptcp: set fullmesh flag in pm_nl_ctl
This patch added the fullmesh flag setting and clearing support in
pm_nl_ctl:
# pm_nl_ctl set ip flags fullmesh
# pm_nl_ctl set ip flags nofullmesh
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:41 +0000 (17:03 -0800)]
mptcp: set fullmesh flag in pm_netlink
This patch added the fullmesh flag setting support in pm_netlink.
If the fullmesh flag of the address is changed, remove all the related
subflows, update the fullmesh flag and create subflows again.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:40 +0000 (17:03 -0800)]
mptcp: print out reset infos of MP_RST
This patch printed out the reset infos, reset_transient and reset_reason,
of MP_RST in mptcp_parse_option() to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Thu, 3 Feb 2022 01:03:39 +0000 (17:03 -0800)]
mptcp: clarify when options can be used
RFC8684 doesn't seem to clearly specify which MPTCP options can be used
together.
Some options are mutually exclusive -- e.g. MP_CAPABLE and MP_JOIN --,
some can be used together -- e.g. DSS + MP_PRIO --, some can but we
prefer not to -- e.g. DSS + ADD_ADDR -- and some have to be used
together at some points -- e.g. MP_FAIL and DSS.
We need to clarify this as a base before allowing other modifications.
For example, does it make sense to send a RM_ADDR with an MPC or MPJ?
This remains open for possible future discussions.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts [Thu, 3 Feb 2022 01:03:38 +0000 (17:03 -0800)]
mptcp: reduce branching when writing MP_FAIL option
MP_FAIL should be use in very rare cases, either when the TCP RST flag
is set -- with or without an MP_RST -- or with a DSS, see
mptcp_established_options().
Here, we do the same in mptcp_write_options().
Co-developed-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geliang Tang [Thu, 3 Feb 2022 01:03:37 +0000 (17:03 -0800)]
mptcp: move the declarations of ssk and subflow
Move the declarations of ssk and subflow in MP_FAIL and MP_PRIO to the
beginning of the function mptcp_write_options().
Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: ipa: support variable RX buffer size
Specify the size of receive buffers used for RX endpoints in the
configuration data, rather than using 8192 bytes for all of them.
Increase the size of the AP receive buffer for the modem to 32KB.
====================
Alex Elder [Tue, 1 Feb 2022 15:37:36 +0000 (09:37 -0600)]
net: ipa: define per-endpoint receive buffer size
Allow RX endpoints to have differing receive buffer sizes. Define
the receive buffer size in the configuration data, and use that
rather than IPA_RX_BUFFER_SIZE when configuring the endpoint.
Add verification in ipa_endpoint_data_valid_one() that the receive
buffer specified for AP RX endpoints is both big enough to handle at
least one full packet, and not so big in an aggregating endpoint
that its size can't be represented when programming the hardware.
Move aggr_byte_limit_max() up in "ipa_endpoint.c" so it can be used
earlier in the file without a forward-reference.
Initially we'll just keep the 8KB receive buffer size already in use
for all AP RX endpoints..
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Akhmat Karakotov [Fri, 28 Jan 2022 19:26:21 +0000 (22:26 +0300)]
tcp: Use BPF timeout setting for SYN ACK RTO
When setting RTO through BPF program, some SYN ACK packets were unaffected
and continued to use TCP_TIMEOUT_INIT constant. This patch adds timeout
option to struct request_sock. Option is initialized with TCP_TIMEOUT_INIT
and is reassigned through BPF using tcp_timeout_init call. SYN ACK
retransmits now use newly added timeout option.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru> Acked-by: Martin KaFai Lau <kafai@fb.com>
v2:
- Add timeout option to struct request_sock. Do not call
tcp_timeout_init on every syn ack retransmit.
v3:
- Use unsigned long for min. Bound tcp_timeout_init to TCP_RTO_MAX.
v4:
- Refactor duplicate code by adding reqsk_timeout function. Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 2 Feb 2022 14:44:00 +0000 (14:44 +0000)]
Merge branch 'qca8k-mdio'
Ansuel Smith says:
====================
Add support for qca8k mdio rw in Ethernet packet
The main reason for this is that we notice some routing problem in the
switch and it seems assisted learning is needed. Considering mdio is
quite slow due to the indirect write using this Ethernet alternative way
seems to be quicker.
The qca8k switch supports a special way to pass mdio read/write request
using specially crafted Ethernet packet.
This works by putting some defined data in the Ethernet header where the
mac source and dst should be placed. The Ethernet type header is set to qca
header and is set to a mdio read/write type.
This is used to communicate to the switch that this is a special packet
and should be parsed differently.
Currently we use Ethernet packet for
- MIB counter
- mdio read/write configuration
- phy read/write for each port
Current implementation of this use completion API to wait for the packet
to be processed by the tagger and has a timeout that fallback to the
legacy mdio way and mutex to enforce one transaction at time.
We now have connect()/disconnect() ops for the tagger. They are used to
allocate priv data in the dsa priv. The header still has to be put in
global include to make it usable by a dsa driver.
They are called when the tag is connect to the dst and the data is freed
using discconect on tagger change.
(if someone wonder why the bind function is put at in the general setup
function it's because tag is set in the cpu port where the notifier is
still not available and we require the notifier to sen the
tag_proto_connect() event.
We now have a tag_proto_connect() for the dsa driver used to put
additional data in the tagger priv (that is actually the dsa priv).
This is called using a switch event DSA_NOTIFIER_TAG_PROTO_CONNECT.
Current use for this is adding handler for the Ethernet packet to keep
the tagger code as dumb as possible.
The tagger priv implement only the handler for the special packet. All the
other stuff is placed in the qca8k_priv and the tagger has to access
it under lock.
We use the new API from Vladimir to track if the master port is
operational or not. We had to track many thing to reach a usable state.
Checking if the port is UP is not enough and tracking a NETDEV_CHANGE is
also not enough since it use also for other task. The correct way was
both track for interface UP and if a qdisc was assigned to the
interface. That tells us the port (and the tagger indirectly) is ready
to accept and process packet.
I tested this with multicpu port and with port6 set as the unique port and
it's sad.
It seems they implemented this feature in a bad way and this is only
supported with cpu port0. When cpu port6 is the unique port, the switch
doesn't send ack packet. With multicpu port, packet ack are not duplicated
and only cpu port0 sends them. This is the same for the MIB counter.
For this reason this feature is enabled only when cpu port0 is enabled and
operational.
v8:
- Reworked to rolling counter for the seq_num
- Reworked the hi/lo cache patch
- Fix multiple missing skb free and mutex lock errors
- Fix some spelling mistake
- Add macro build check for mgmt packet size
- Change some struct naming to make them more descriptive
v7:
- Rebase on net-next changes
- Add bulk patches to speedup this even more
v6:
- Fix some error in ethtool handler caused by rebase/cleanup
v5:
- Adapt to new API fixes
- Fix a wrong logic for noop
- Add additional lock for master_state change
- Limit mdio Ethernet to cpu port0 (switch limitation)
- Add priority to these special packet
- Move mdio cache to qca8k_priv
v4:
- Remove duplicate patch sent by mistake.
v3:
- Include MIB with Ethernet packet.
- Include phy read/write with Ethernet packet.
- Reorganize code with new API.
- Introuce master tracking by Vladimir
v2:
- Address all suggestion from Vladimir.
Try to generilize this with connect/disconnect function from the
tagger and tag_proto_connect for the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:35 +0000 (01:03 +0100)]
net: dsa: qca8k: introduce qca8k_bulk_read/write function
Introduce qca8k_bulk_read/write() function to use mgmt Ethernet way to
read/write packet in bulk. Make use of this new function in the fdb
function and while at it reduce the reg for fdb_read from 4 to 3 as the
max bit for the ARL(fdb) table is 83 bits.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:34 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet
mgmt Ethernet packet can read/write up to 16byte at times. The len reg
is limited to 15 (0xf). The switch actually sends and accepts data in 4
different steps of len values.
Len steps:
- 0: nothing
- 1-4: first 4 byte
- 5-6: first 12 byte
- 7-15: all 16 byte
In the alloc skb function we check if the len is 16 and we fix it to a
len of 15. It the read/write function interest to extract the real asked
data. The tagger handler will always copy the fully 16byte with a READ
command. This is useful for some big regs like the fdb reg that are
more than 4byte of data. This permits to introduce a bulk function that
will send and request the entire entry in one go.
Write function is changed and it does now require to pass the pointer to
val to also handle array val.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:33 +0000 (01:03 +0100)]
net: dsa: qca8k: cache lo and hi for mdio write
From Documentation, we can cache lo and hi the same way we do with the
page. This massively reduce the mdio write as 3/4 of the time as we only
require to write the lo or hi part for a mdio write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:32 +0000 (01:03 +0100)]
net: dsa: qca8k: move page cache to driver priv
There can be multiple qca8k switch on the same system. Move the static
qca8k_current_page to qca8k_priv and make it specific for each switch.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:31 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for phy read/write with mgmt Ethernet
Use mgmt Ethernet also for phy read/write if availabale. Use a different
seq number to make sure we receive the correct packet.
On any error, we fallback to the legacy mdio read/write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:30 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for mib autocast in Ethernet packet
The switch can autocast MIB counter using Ethernet packet.
Add support for this and provide a handler for the tagger.
The switch will send packet with MIB counter for each port, the switch
will use completion API to wait for the correct packet to be received
and will complete the task only when each packet is received.
Although the handler will drop all the other packet, we still have to
consume each MIB packet to complete the request. This is done to prevent
mixed data with concurrent ethtool request.
connect_tag_protocol() is used to add the handler to the tag_qca tagger,
master_state_change() use the MIB lock to make sure no MIB Ethernet is
in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:29 +0000 (01:03 +0100)]
net: dsa: qca8k: add support for mgmt read/write in Ethernet packet
Add qca8k side support for mgmt read/write in Ethernet packet.
qca8k supports some specially crafted Ethernet packet that can be used
for mgmt read/write instead of the legacy method uart/internal mdio.
This add support for the qca8k side to craft the packet and enqueue it.
Each port and the qca8k_priv have a special struct to put data in it.
The completion API is used to wait for the packet to be received back
with the requested data.
The various steps are:
1. Craft the special packet with the qca hdr set to mgmt read/write
mode.
2. Set the lock in the dedicated mgmt struct.
3. Increment the seq number and set it in the mgmt pkt
4. Reinit the completion.
5. Enqueue the packet.
6. Wait the packet to be received.
7. Use the data set by the tagger to complete the mdio operation.
If the completion timeouts or the ack value is not true, the legacy
mdio way is used.
It has to be considered that in the initial setup mdio is still used and
mdio is still used until DSA is ready to accept and tag packet.
tag_proto_connect() is used to fill the required handler for the tagger
to correctly parse and elaborate the special Ethernet mdio packet.
Locking is added to qca8k_master_change() to make sure no mgmt Ethernet
are in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:28 +0000 (01:03 +0100)]
net: dsa: qca8k: add tracking state of master port
MDIO/MIB Ethernet require the master port and the tagger availabale to
correctly work. Use the new api master_state_change to track when master
is operational or not and set a bool in qca8k_priv.
We cache the first cached master available and we check if other cpu
port are operational when the cached one goes down.
This cached master will later be used by mdio read/write and mib request to
correctly use the working function.
qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only
one that answers with the ack packet or sends MIB Ethernet packets. For
this reason the master_state_change ignore CPU port6 and only checks
CPU port0 if it's operational and enables this mode.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:27 +0000 (01:03 +0100)]
net: dsa: tag_qca: add support for handling mgmt and MIB Ethernet packet
Add connect/disconnect helper to assign private struct to the DSA switch.
Add support for Ethernet mgmt and MIB if the DSA driver provide an handler
to correctly parse and elaborate the data.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:26 +0000 (01:03 +0100)]
net: dsa: tag_qca: add define for handling MIB packet
Add struct to correctly parse a mib Ethernet packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:25 +0000 (01:03 +0100)]
net: dsa: tag_qca: add define for handling mgmt Ethernet packet
Add all the required define to prepare support for mgmt read/write in
Ethernet packet. Any packet of this type has to be dropped as the only
use of these special packet is receive ack for an mgmt write request or
receive data for an mgmt read request.
A struct is used that emulates the Ethernet header but is used for a
different purpose.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:24 +0000 (01:03 +0100)]
net: dsa: tag_qca: enable promisc_on_master flag
Ethernet MDIO packets are non-standard and DSA master expects the first
6 octets to be the MAC DA. To address these kind of packet, enable
promisc_on_master flag for the tagger.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:23 +0000 (01:03 +0100)]
net: dsa: tag_qca: move define to include linux/dsa
Move tag_qca define to include dir linux/dsa as the qca8k require access
to the tagger define to support in-band mdio read/write using ethernet
packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith [Wed, 2 Feb 2022 00:03:22 +0000 (01:03 +0100)]
net: dsa: tag_qca: convert to FIELD macro
Convert driver to FIELD macro to drop redundant define.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 2 Feb 2022 00:03:21 +0000 (01:03 +0100)]
net: dsa: replay master state events in dsa_tree_{setup,teardown}_master
In order for switch driver to be able to make simple and reliable use of
the master tracking operations, they must also be notified of the
initial state of the DSA master, not just of the changes. This is
because they might enable certain features only during the time when
they know that the DSA master is up and running.
Therefore, this change explicitly checks the state of the DSA master
under the same rtnl_mutex as we were holding during the
dsa_master_setup() and dsa_master_teardown() call. The idea being that
if the DSA master became operational in between the moment in which it
became a DSA master (dsa_master_setup set dev->dsa_ptr) and the moment
when we checked for the master being up, there is a chance that we
would emit a ->master_state_change() call with no actual state change.
We need to avoid that by serializing the concurrent netdevice event with
us. If the netdevice event started before, we force it to finish before
we begin, because we take rtnl_lock before making netdev_uses_dsa()
return true. So we also handle that early event and do nothing on it.
Similarly, if the dev_open() attempt is concurrent with us, it will
attempt to take the rtnl_mutex, but we're holding it. We'll see that
the master flag IFF_UP isn't set, then when we release the rtnl_mutex
we'll process the NETDEV_UP notifier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 2 Feb 2022 00:03:20 +0000 (01:03 +0100)]
net: dsa: provide switch operations for tracking the master state
Certain drivers may need to send management traffic to the switch for
things like register access, FDB dump, etc, to accelerate what their
slow bus (SPI, I2C, MDIO) can already do.
Ethernet is faster (especially in bulk transactions) but is also more
unreliable, since the user may decide to bring the DSA master down (or
not bring it up), therefore severing the link between the host and the
attached switch.
Drivers needing Ethernet-based register access already should have
fallback logic to the slow bus if the Ethernet method fails, but that
fallback may be based on a timeout, and the I/O to the switch may slow
down to a halt if the master is down, because every Ethernet packet will
have to time out. The driver also doesn't have the option to turn off
Ethernet-based I/O momentarily, because it wouldn't know when to turn it
back on.
Which is where this change comes in. By tracking NETDEV_CHANGE,
NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know
the exact interval of time during which this interface is reliably
available for traffic. Provide this information to switches so they can
use it as they wish.
An helper is added dsa_port_master_is_operational() to check if a master
port is operational.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Mon, 31 Jan 2022 11:10:54 +0000 (11:10 +0000)]
sfc: The size of the RX recycle ring should be more flexible
Ideally the size would depend on the link speed, but the recycle
ring is created when the interface is brought up before the driver
knows the link speed. So size it for the maximum speed of a given NIC.
PowerPC is only supported on SFN7xxx and SFN8xxx NICs.
With this patch on a 40G NIC the number of calls to alloc_pages and
friends went down from about 18% to under 2%.
On a 10G NIC the number of calls to alloc_pages and friends went down
from about 15% to 0 (perf did not capture any calls during the 60
second test).
On a 100G NIC the number of calls to alloc_pages and friends went down
from about 23% to 4%.
Jakub Kicinski [Mon, 31 Jan 2022 23:33:57 +0000 (15:33 -0800)]
net: allow SO_MARK with CAP_NET_RAW via cmsg
There's not reason SO_MARK would be allowed via setsockopt()
and not via cmsg, let's keep the two consistent. See
commit 079925cce1d0 ("net: allow SO_MARK with CAP_NET_RAW")
for justification why NET_RAW -> SO_MARK is safe.
David S. Miller [Tue, 1 Feb 2022 14:18:44 +0000 (14:18 +0000)]
Merge branch 'lan966x-ptp'
Horatiu Vultur says:
====================
net: lan966x: Add PTP Hardward Clock support
Add support for PTP Hardware Clock (PHC) for lan966x. The switch supports
both PTP 1-step and 2-step modes.
v1->v2:
- fix commit messages
- reduce the scope of the lock ptp_lock inside the function
lan966x_ptp_hwtstamp_set
- the rx timestamping is always enabled for all packages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:21 +0000 (11:01 +0100)]
net: lan966x: Add support for ptp interrupts
When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:20 +0000 (11:01 +0100)]
net: lan966x: Update extraction/injection for timestamping
Update both the extraction and injection to do timestamping of the
frames. The extraction is always doing the timestamping while for
injection is doing the timestamping only if it is configured.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:19 +0000 (11:01 +0100)]
net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP
Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow
to configure the ports to enable/disable timestamping for TX. The RX
timestamping is always enabled. The HW is capable to run both 1-step
timestamping and 2-step timestamping.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 31 Jan 2022 10:01:18 +0000 (11:01 +0100)]
net: lan966x: Add support for ptp clocks
The lan966x has 3 PHC. Enable each of them, for now all the
timestamping is happening on the first PHC.
Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 31 Jan 2022 15:42:06 +0000 (16:42 +0100)]
selftests: fib rule: Log test description
All callers of fib_rule6_test_match_n_redirect() and
fib_rule4_test_match_n_redirect() pass a third argument containing a
description of the test being run. Instead of ignoring this argument,
let's use it for logging instead of printing a truncated version of the
command.
Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Mon, 31 Jan 2022 15:42:04 +0000 (16:42 +0100)]
selftests: fib rule: Drop erroneous TABLE variable
The fib_rule6_del_by_pref() and fib_rule4_del_by_pref() functions use
an uninitialised $TABLE variable. They should use $RTABLE instead.
This doesn't alter the result of the test, as it just makes the grep
command less specific (but since the script always uses the same table
number, that doesn't really matter).
Let's fix it anyway and, while there, specify the filtering parameters
directly in 'ip -X rule show' to avoid the extra grep command entirely.
Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 1 Feb 2022 12:53:18 +0000 (12:53 +0000)]
Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next
-queue
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2022-01-31
Alexander Lobakin says:
This is an interpolation of [0] to other Intel Ethernet drivers
(and is (re)based on its code).
The main aim is to keep XDP metadata not only in case with
build_skb(), but also when we do napi_alloc_skb() + memcpy().
All Intel drivers suffers from the same here:
- metadata gets lost on XDP_PASS in legacy-rx;
- excessive headroom allocation on XSK Rx to skbs;
- metadata gets lost on XSK Rx to skbs.
Those get especially actual in XDP Hints upcoming.
I couldn't have addressed the first one for all Intel drivers due to
that they don't reserve any headroom for now in legacy-rx mode even
with XDP enabled. This is hugely wrong, but requires quite a bunch
of work and a separate series. Luckily, ice doesn't suffer from
that.
igc has 1 and 3 already fixed in [0].
Hyeonggon Yoo [Sat, 29 Jan 2022 08:53:36 +0000 (08:53 +0000)]
net: ena: Do not waste napi skb cache
By profiling, discovered that ena device driver allocates skb by
build_skb() and frees by napi_skb_cache_put(). Because the driver
does not use napi skb cache in allocation path, napi skb cache is
periodically filled and flushed. This is waste of napi skb cache.
As ena_alloc_skb() is called only in napi, Use napi_build_skb()
and napi_alloc_skb() when allocating skb.
This patch was tested on aws a1.metal instance.
[ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of
netdev_alloc_skb_ip_align() to keep things consistent. ]
qed: use msleep() in qed_mcp_cmd() and add qed_mcp_cmd_nosleep() for udelay.
Change qed_mcp_cmd() to use msleep() (by setting QED_MB_FLAG_CAN_SLEEP
flag) and add new nosleep() version of the api. These api are used to
issue cmds to management fw and the change affects how driver
behaves while waiting for a response/resource.
All sleepable callers of the existing api now use msleep() version. For
non-sleepable callers, the new nosleep() version is explicitly used.
For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().
Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly
To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().
Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ice_construct_skb().
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ice_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: respect metadata in legacy-rx/ice_construct_skb()
In "legacy-rx" mode represented by ice_construct_skb(), we can
still use XDP (and XDP metadata), but after XDP_PASS the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
Point net_prefetch() to xdp->data_meta instead of data. This won't
change anything when the meta is not here, but will save some cache
misses otherwise.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David S. Miller [Mon, 31 Jan 2022 15:08:20 +0000 (15:08 +0000)]
Merge branch 'smc-improvements'
Tony Lu says:
====================
net/smc: Improvements for TCP_CORK and sendfile()
Currently, SMC use default implement for syscall sendfile() [1], which
is wildly used in nginx and big data sences. Usually, applications use
sendfile() with TCP_CORK:
The above is an example of Nginx, when sendfile() on, Nginx first
enables TCP_CORK, write headers, the data will not be sent. Then call
sendfile(), it reads file and write to sndbuf. When TCP_CORK is cleared,
all pending data is sent out.
The performance of the default implement of sendfile is lower than when
it is off. After investigation, it shows two parts to improve:
- unnecessary lock contention of delayed work
- less data per send than when sendfile off
Patch #1 tries to reduce lock_sock() contention in smc_tx_work().
Patch #2 removes timed work for corking, and let applications control
it. See TCP_CORK [2] MSG_MORE [3].
Patch #3 adds MSG_SENDPAGE_NOTLAST for corking more data when
sendfile().
Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- server: smc_run nginx
- client: smc_run ./wrk -c 100 -t 2 -d 30 http://192.168.100.1:8080/4k.html
- payload: 4KB local disk file
Items QPS
sendfile off 272477.10
sendfile on (orig) 223622.79
sendfile on (this) 395847.21
This benchmark shows +45.28% improvement compared with sendfile off, and
+77.02% compared with original sendfile implement.
Tony Lu [Sun, 30 Jan 2022 18:02:57 +0000 (02:02 +0800)]
net/smc: Cork when sendpage with MSG_SENDPAGE_NOTLAST flag
This introduces a new corked flag, MSG_SENDPAGE_NOTLAST, which is
involved in syscall sendfile() [1], it indicates this is not the last
page. So we can cork the data until the page is not specify this flag.
It has the same effect as MSG_MORE, but existed in sendfile() only.
This patch adds a option MSG_SENDPAGE_NOTLAST for corking data, try to
cork more data before sending when using sendfile(), which acts like
TCP's behaviour. Also, this reimplements the default sendpage to inform
that it is supported to some extent.
Tony Lu [Sun, 30 Jan 2022 18:02:56 +0000 (02:02 +0800)]
net/smc: Remove corked dealyed work
Based on the manual of TCP_CORK [1] and MSG_MORE [2], these two options
have the same effect. Applications can set these options and informs the
kernel to pend the data, and send them out only when the socket or
syscall does not specify this flag. In other words, there's no need to
send data out by a delayed work, which will queue a lot of work.
This removes corked delayed work with SMC_TX_CORK_DELAY (250ms), and the
applications control how/when to send them out. It improves the
performance for sendfile and throughput, and remove unnecessary race of
lock_sock(). This also unlocks the limitation of sndbuf, and try to fill
it up before sending.
Tony Lu [Sun, 30 Jan 2022 18:02:55 +0000 (02:02 +0800)]
net/smc: Send directly when TCP_CORK is cleared
According to the man page of TCP_CORK [1], if set, don't send out
partial frames. All queued partial frames are sent when option is
cleared again.
When applications call setsockopt to disable TCP_CORK, this call is
protected by lock_sock(), and tries to mod_delayed_work() to 0, in order
to send pending data right now. However, the delayed work smc_tx_work is
also protected by lock_sock(). There introduces lock contention for
sending data.
To fix it, send pending data directly which acts like TCP, without
lock_sock() protected in the context of setsockopt (already lock_sock()ed),
and cancel unnecessary dealyed work, which is protected by lock.
[1] https://linux.die.net/man/7/tcp
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jan 2022 15:05:25 +0000 (15:05 +0000)]
Merge branch 'hash-rethink'
Akhmat Karakotov says:
====================
Make hash rethink configurable
As it was shown in the report by Alexander Azimov, hash rethink at the
client-side may lead to connection timeout toward stateful anycast
services. Tom Herbert created a patchset to address this issue by applying
hash rethink only after a negative routing event (3RTOs) [1]. This change
also affects server-side behavior, which we found undesirable. This
patchset changes defaults in a way to make them safe: hash rethink at the
client-side is disabled and enabled at the server-side upon each RTO
event or in case of duplicate acknowledgments.
This patchset provides two options to change default behaviour. The hash
rethink may be disabled at the server-side by the new sysctl option.
Changes in the sysctl option don't affect default behavior at the
client-side.
Hash rethink can also be enabled/disabled with socket option or bpf
syscalls which ovewrite both default and sysctl settings. This socket
option is available on both client and server-side. This should provide
mechanics to enable hash rethink inside administrative domain, such as DC,
where hash rethink at the client-side can be desirable.
v2:
- Changed sysctl default to ENABLED in all patches. Reduced sysctl
and socket option size to u8. Fixed netns bug reported by kernel
test robot.
v3:
- Fixed bug with bad u8 comparison. Moved sk_txrehash to use less
bytes in struct. Added WRITE_ONCE() in setsockopt in and
READ_ONCE() in tcp_rtx_synack.
v4:
- Rebase and add documentation for sysctl option.
v5:
- Move sk_txrehash out of busy poll ifdef.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:25 +0000 (16:31 +0300)]
tcp: Change SYN ACK retransmit behaviour to account for rehash
Disabling rehash behavior did not affect SYN ACK retransmits because hash
was forcefully changed bypassing the sk_rethink_hash function. This patch
adds a condition which checks for rehash mode before resetting hash.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:24 +0000 (16:31 +0300)]
bpf: Add SO_TXREHASH setsockopt
Add bpf socket option to override rehash behaviour from userspace or from bpf.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:22 +0000 (16:31 +0300)]
txhash: Add socket option to control TX hash rethink behavior
Add the SO_TXREHASH socket option to control hash rethink behavior per socket.
When default mode is set, sockets disable rehash at initialization and use
sysctl option when entering listen state. setsockopt() overrides default
behavior.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Akhmat Karakotov [Mon, 31 Jan 2022 13:31:21 +0000 (16:31 +0300)]
txhash: Make rethinking txhash behavior configurable via sysctl
Add a per ns sysctl that controls the txhash rethink behavior:
net.core.txrehash. When enabled, the same behavior is retained,
when disabled, rethink is not performed. Sysctl is enabled by default.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder [Sun, 30 Jan 2022 09:54:22 +0000 (10:54 +0100)]
selftests/net: timestamping: Fix bind_phc check
timestamping checks socket options during initialisation. For the field
bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if
PHC is not bound. Actually the value of bind_phc is 0 if PHC is not
bound. This results in the following output:
This is fixed by setting default value and expected value of bind_phc to
0.
Fixes: 2214d7032479 ("selftests/net: timestamping: support binding PHC") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 31 Jan 2022 11:42:13 +0000 (11:42 +0000)]
Merge branch 'renesas-dead-code'
Sergey Shtylyov says:
====================
Remove some dead code in the Renesas Ethernet drivers
Here are 2 patches against DaveM's 'net-next.git' repo. The Renesas drivers
call their ndo_stop() methods directly and they always return 0, making the
result checks pointless, hence remove them...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergey Shtylyov [Sat, 29 Jan 2022 11:55:17 +0000 (14:55 +0300)]
sh_eth: sh_eth_close() always returns 0
sh_eth_close() always returns 0, hence the check in sh_eth_wol_restore()
is pointless (however we cannot change the prototype of sh_eth_close() as
it implements the driver's ndo_stop() method).
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergey Shtylyov [Sat, 29 Jan 2022 11:55:16 +0000 (14:55 +0300)]
ravb: ravb_close() always returns 0
ravb_close() always returns 0, hence the check in ravb_wol_restore() is
pointless (however, we cannot change the prototype of ravb_close() as it
implements the driver's ndo_stop() method).
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Sat, 29 Jan 2022 01:27:02 +0000 (01:27 +0000)]
net/fsl: xgmac_mdio: fix return value check in xgmac_mdio_probe()
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Fixes: 1d14eb15dc2c ("net/fsl: xgmac_mdio: Use managed device resources") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 28 Jan 2022 23:53:47 +0000 (16:53 -0700)]
ipv4: Make ip_idents_reserve static
ip_idents_reserve is only used in net/ipv4/route.c. Make it static
and remove the export.
Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 28 Jan 2022 20:41:42 +0000 (21:41 +0100)]
r8169: add rtl_disable_exit_l1()
Add rtl_disable_exit_l1() for ensuring that the chip doesn't
inadvertently exit ASPM L1 when being in a low-power mode.
The new function is called from rtl_prepare_power_down() which
has to be moved in the code to avoid a forward declaration.
According to Realtek OCP register 0xc0ac shadows ERI register 0xd4
on RTL8168 versions from RTL8168g. This allows to simplify the
code a little.
v2:
- call rtl_disable_exit_l1() also if DASH or WoL are enabled
Suggested-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sergey Shtylyov [Fri, 28 Jan 2022 18:32:40 +0000 (21:32 +0300)]
phy: make phy_set_max_speed() *void*
After following the call tree of phy_set_max_speed(), it became clear
that this function never returns anything but 0, so we can change its
result type to *void* and drop the result checks from the three drivers
that actually bothered to do it...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
The individual patches have all the details. This work was triggered
by recent work on a platform that took 16s (sic) to load the mv88e6xxx
module.
The first patch gets rid of most of that time by replacing a very long
delay with a tighter poll loop to wait for the busy bit to clear.
The second patch shaves off some more time by avoiding redundant
busy-bit-checks, saving 1 out of 4 MDIO operations for every register
read/write in the optimal case.
v1 -> v2:
- Make sure that we always poll the busy bit at least twice, in the
unlikely event that the first one is quick to query the hardware,
but is then scheduled out for a long time before the timeout is
checked.
v2 -> v3:
- Fallback to the longer sleeps after the initial two poll attempts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this change, both the read and write callback would start out
by asserting that the chip's busy flag was cleared. However, both
callbacks also made sure to wait for the clearing of the busy bit
before returning - making the initial check superfluous. The only
time that would ever have an effect was if the busy bit was initially
set for some reason.
With that in mind, make sure to perform an initial check of the busy
bit, after which both read and write can rely the previous operation
to have waited for the bit to clear.
This cuts the number of operations on the underlying MDIO bus by 25%
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6xxx: Improve performance of busy bit polling
Avoid a long delay when a busy bit is still set and has to be polled
again.
Measurements on a system with 2 Opals (6097F) and one Agate (6352)
show that even with this much tighter loop, we have about a 50% chance
of the bit being cleared on the first poll, all other accesses see the
bit being cleared on the second poll.
On a standard MDIO bus running MDC at 2.5MHz, a single access with 32
bits of preamble plus 32 bits of data takes 64*(1/2.5MHz) = 25.6us.
This means that mv88e6xxx_smi_direct_wait took 26us + CPU overhead in
the fast scenario, but 26us + 1500us + 26us + CPU overhead in the slow
case - bringing the average close to 1ms.
With this change in place, the slow case is closer to 2*26us + CPU
overhead, with the average well below 100us - a 10x improvement.
This translates to real-world winnings. On a 3-chip 20-port system,
the modprobe time drops by 88%:
Before:
root@coronet:~# time modprobe mv88e6xxx
real 0m 15.99s
user 0m 0.00s
sys 0m 1.52s
After:
root@coronet:~# time modprobe mv88e6xxx
real 0m 2.21s
user 0m 0.00s
sys 0m 1.54s
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Sun Shouxin [Fri, 28 Jan 2022 14:44:42 +0000 (09:44 -0500)]
net: bonding: Add support for IPV6 ns/na to balance-alb/balance-tlb mode
Since ipv6 neighbor solicitation and advertisement messages
isn't handled gracefully in bond6 driver, we can see packet
drop due to inconsistency between mac address in the option
message and source MAC .
Another examples is ipv6 neighbor solicitation and advertisement
messages from VM via tap attached to host bridge, the src mac
might be changed through balance-alb mode, but it is not synced
with Link-layer address in the option message.
The patch implements bond6's tx handle for ipv6 neighbor
solicitation and advertisement messages.
Suggested-by: Hu Yadi <huyd12@chinatelecom.cn> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 29 Jan 2022 17:49:21 +0000 (17:49 +0000)]
Merge branch 'Cadence-ZyncMP-SGMII'
Robert Hancock says:
====================
Cadence MACB/GEM support for ZynqMP SGMII
Changes to allow SGMII mode to work properly in the GEM driver on the
Xilinx ZynqMP platform.
Changes since v3:
-more code formatting and error handling fixes
Changes since v2:
-fixed missing includes in DT binding example
-fixed phy_init and phy_power_on error handling/cleanup, moved
phy_power_on to open rather than probe
Changes since v1:
-changed order of controller reset and PHY init as per suggestion
-switched device reset to be optional
-updated bindings doc patch for switch to YAML
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Thu, 27 Jan 2022 16:37:36 +0000 (10:37 -0600)]
arm64: dts: zynqmp: Added GEM reset definitions
The Cadence GEM/MACB driver now utilizes the platform-level reset on the
ZynqMP platform. Add reset definitions to the ZynqMP platform device
tree to allow this to be used.
Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Thu, 27 Jan 2022 16:37:35 +0000 (10:37 -0600)]
net: macb: Added ZynqMP-specific initialization
The GEM controllers on ZynqMP were missing some initialization steps which
are required in some cases when using SGMII mode, which uses the PS-GTR
transceivers managed by the phy-zynqmp driver.
The GEM core appears to need a hardware-level reset in order to work
properly in SGMII mode in cases where the GT reference clock was not
present at initial power-on. This can be done using a reset mapped to
the zynqmp-reset driver in the device tree.
Also, when in SGMII mode, the GEM driver needs to ensure the PHY is
initialized and powered on.
Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Robert Hancock [Thu, 27 Jan 2022 16:37:34 +0000 (10:37 -0600)]
dt-bindings: net: cdns,macb: added generic PHY and reset mappings for ZynqMP
Updated macb DT binding documentation to reflect the phy-names, phys,
resets, reset-names properties which are now used with ZynqMP GEM
devices, and added a ZynqMP-specific DT example.
Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 28 Jan 2022 21:39:04 +0000 (13:39 -0800)]
Merge tag 'for-net-next-2022-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for RTL8822C hci_ver 0x08
- Add support for RTL8852AE part 0bda:2852
- Fix WBS setting for Intel legacy ROM products
- Enable SCO over I2S ib mt7921s
- Increment management interface revision
* tag 'for-net-next-2022-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (30 commits)
Bluetooth: Increment management interface revision
Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set
Bluetooth: hci_h5: Add power reset via gpio in h5_btrtl_open
Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08
Bluetooth: hci_event: Fix HCI_EV_VENDOR max_len
Bluetooth: hci_core: Rate limit the logging of invalid SCO handle
Bluetooth: hci_event: Ignore multiple conn complete events
Bluetooth: msft: fix null pointer deref on msft_monitor_device_evt
Bluetooth: btmtksdio: mask out interrupt status
Bluetooth: btmtksdio: run sleep mode by default
Bluetooth: btmtksdio: lower log level in btmtksdio_runtime_[resume|suspend]()
Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl()
Bluetooth: mt7921s: fix bus hang with wrong privilege
Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]()
Bluetooth: mt7921s: fix firmware coredump retrieve
Bluetooth: hci_serdev: call init_rwsem() before p->open()
Bluetooth: Remove kernel-doc style comment block
Bluetooth: btusb: Whitespace fixes for btusb_setup_csr()
Bluetooth: btusb: Add one more Bluetooth part for the Realtek RTL8852AE
Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products
...
====================
Jisheng Zhang [Fri, 28 Jan 2022 14:52:13 +0000 (22:52 +0800)]
net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended
Currently, the dwmac-sun8i's stmmaceth clk isn't disabled even if the
the device has been runtime suspended. The reason is the driver gets
the "stmmaceth" clk as tx_clk and enabling it during probe. But
there's no other usage of tx_clk except preparing and enabling, so
we can remove tx_clk and its usage then rely on the common routine
stmmac_probe_config_dt() to prepare and enable the stmmaceth clk
during driver initialization, and benefit from the runtime pm feature
after probed.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 28 Jan 2022 15:02:50 +0000 (15:02 +0000)]
Merge branch 'dsa-realtek-MDIO'
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: MDIO interface and RTL8367S,RTL8367RB-VB
The old realtek-smi driver was linking subdrivers into a single
realtek-smi.ko After this series, each subdriver will be an independent
module required by either realtek-smi (platform driver) or the new
realtek-mdio (mdio driver). Both interface drivers (SMI or MDIO) are
independent, and they might even work side-by-side, although it will be
difficult to find such device. The subdriver can be individually
selected but only at buildtime, saving some storage space for custom
embedded systems.
Existing realtek-smi devices continue to work untouched during the
tests. The realtek-smi was moved into a realtek subdirectory, but it
normally does not break things.
I couldn't identify a fixed relation between port numbers (0..9) and
external interfaces (0..2), and I'm not sure if it is fixed for each
chip version or a device configuration. Until there is more info about
it, there is a new port property "realtek,ext-int" that can inform the
external interface.
The rtl8365mb might now handle multiple CPU ports and extint ports not
used as CPU ports. RTL8367S has an SGMII external interface, but my test
device (TP-Link Archer C5v4) uses only the second RGMII interface. We
need a test device with more external ports to test these features.
The driver still cannot handle SGMII ports.
RTL8367RB-VB support was added using information from Frank Wunderlich
<frank-w@public-files.de> but I didn't test it myself.
The rtl8365mb was tested with a MDIO-connected RTL8367S (TP-Link Acher
C5v4) and a SMI-connected RTL8365MB-VC switch (Asus RT-AC88U)
The rtl8366rb subdriver was not tested with this patch series, but it
was only slightly touched. It would be nice to test it, especially in an
MDIO-connected switch.
Best,
Luiz
Changelog:
v1-v2)
- formatting fixes
- dropped the rtl8365mb->rtl8367c rename
- other suggestions
v2-v3)
* realtek-mdio.c:
- cleanup realtek-mdio.c (BUG_ON, comments and includes)
- check devm_regmap_init return code
- removed realtek,rtl8366s string from realtek-mdio
* realtek-smi.c:
- removed void* type cast
* rtl8365mb.c:
- using macros to identify EXT interfaces
- rename some extra extport->extint cases
- allow extint as non cpu (not tested)
- allow multple cpu ports (not tested)
- dropped cpu info from struct rtl8365mb
* dropped dt-bindings changes (dealing outside this series)
* formatting issues fixed
v3-v4)
* fix cover message numbering 0/13 -> 0/11
* use static for realtek_mdio_read_reg
- Reported-by: kernel test robot <lkp@intel.com>
* use dsa_switch_for_each_cpu_port
* mention realtek_smi_{variant,ops} to realtek_{variant,ops}
in commit message
v5) sent again v4 branch. Sorry
v4-v6)
- added support for RTL8367RB-VB
- cleanup mdio_{read,write}, removing misterious START_OP, checking and
returning errors
- renamed priv->phy_id to priv->mdio_addr
- duplicated priv->ds_ops into ds_ops_{smi,mdio}. ds_ops_smi must not
set
phy_read or else both dsa and this driver might free slave_mii.
Dropped 401fd75c92f37
- Map port to extint using code instead of device-tree property. Added
comment
about port number, port description and external interfaces. Dropped
'realtek,ext-int' device-tree property
- Redacted the non-cpu ext port commit message, not highlighting the
possibility of using multiple CPU ports as it was just a byproduct.
- In a possible case of multiple cpu ports, use the first one as the
trap port.
Dropped 'realtek,trap-port' device-tree property
- Some formatting fixes
- BUG: rtl8365mb_phy_mode_supported was still checking for a cpu port
and not
an external interface
- BUG: fix trapdoor masking for port>7. Got a compiler error with a
bigger
constant value
- WARN: completed kdoc for rtl8366rb_drop_untagged()
- WARN: removed marks from incomplete kdoc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trap door number is a 4-bit number divided in two regions (3 and 1-bit).
Both values were not masked properly. This bug does not affect supported
devices as they use up to port 7 (ext2). It would only be a problem if
the driver becomes compatible with 10-port switches like RTL8370MB and
RTL8310SR.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
External interfaces can be configured, even if they are not CPU ports.
The first CPU port will also be the trap port (for receiving trapped
frames from the switch).
The CPU information was dropped from chip data as it was not used
outside setup. The only other place it was used is when it wrongly
checks for CPU port when it should check for extint.
The supported modes check now uses port type and not port usage.
As a byproduct, more than one CPU can be configured. although this
might not work well with DSA setups. Also, this driver is still only
blindly forwarding all traffic to CPU port(s).
This change was not tested in a device with multiple active external
interfaces ports.
realtek_priv->cpu_port is now only used by rtl8366rb.c
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: realtek: rtl8365mb: add RTL8367S support
Realtek's RTL8367S, a 5+2 port 10/100/1000M Ethernet switch.
It shares the same driver family (RTL8367C) with other models
as the RTL8365MB-VC. Its compatible string is "realtek,rtl8367s".
It was tested only with MDIO interface (realtek-mdio), although it might
work out-of-the-box with SMI interface (using realtek-smi).
This patch was based on an unpublished patch from Alvin Šipraga
<alsi@bang-olufsen.dk>.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / kernel.git / log