Tina Hsu [Thu, 22 Sep 2022 06:16:30 +0000 (14:16 +0800)]
nvme-pci: disable Write Zeroes on Phison E3C/E4C
E3C/E4C SSDs do support the Write Zeroes command in theory, but have very
bad performance when using it. As the firmware has been frozen for these
products we can not expect firmware improvements for it, so disable
Write Zeroes.
Signed-off-by: Tina Hsu <tina_hsu@phison.corp-partner.google.com>
[hch: update the commit message] Signed-off-by: Christoph Hellwig <hch@lst.de>
Michael Kelley [Fri, 23 Sep 2022 04:49:09 +0000 (21:49 -0700)]
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified). The current code does it backwards.
Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.
Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command. The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.
Tested on a version 1.4 PCI NVMe device in an Azure VM.
Fixes: 6a147b690aff ("nvme: move block_device_operations and ns/ctrl freeing to common code") Fixes: 60d4da9ad7bb ("NVMe: Add persistent reservation ops") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Dusty Mabe reported consistent hang during CoreOS shutdown with a MD
RAID1 setup. Although apparently similar hangs happened before,
and this patch most likely is not the root cause it made it much
more severe. Revert it until we can figure out what is going on
with the md driver.
Stefan Haberland [Mon, 19 Sep 2022 15:49:31 +0000 (17:49 +0200)]
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
Cc: <stable@vger.kernel.org> # 2.6.25+ Fixes: d961699f84cf ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's a bug in blkdev_issue_secure_erase. The statement
"unsigned int len = min_t(sector_t, nr_sects, max_sectors);"
sets the variable "len" to the length in sectors, but the statement
"bio->bi_iter.bi_size = len" treats it as if it were in bytes.
The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len <<
SECTOR_SHIFT" are thinko.
Merge tag 'nvme-6.0-2022-09-08' of git://git.infradead.org/nvme into block-6.0
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors (Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)"
* tag 'nvme-6.0-2022-09-08' of git://git.infradead.org/nvme:
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
Keith Busch [Thu, 1 Sep 2022 15:30:39 +0000 (08:30 -0700)]
nvme: requeue aen after firmware activation
The driver prevents async event work while handling a processing paused
event, but someone needs to restart it after the controller returns to a
live state.
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.
Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).
Fixes: ffa08b52e6a2 ("nvmet: add ZBD over ZNS backend support") Suggested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme-tcp: fix regression that causes sporadic requests to time out
When we queue requests, we strive to batch as much as possible and also
signal the network stack that more data is about to be sent over a socket
with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued
as well as queue->more_requests that is derived from the block layer
last-in-batch indication.
We set more_request=true when we flush the request directly from
.queue_rq submission context (in nvme_tcp_send_all), however this is
wrongly assuming that no other requests may be queued during the
execution of nvme_tcp_send_all.
Due to this, a race condition may happen where:
1. request X is queued as !last-in-batch
2. request X submission context calls nvme_tcp_send_all directly
3. nvme_tcp_send_all is preempted and schedules to a different cpu
4. request Y is queued as last-in-batch
5. nvme_tcp_send_all context sends request X+Y, however signals for
both MSG_SENDPAGE_NOTLAST because queue->more_requests=true.
==> none of the requests is pushed down to the wire as the network
stack is waiting for more data, both requests timeout.
To fix this, we eliminate queue->more_requests and only rely on
the queue req_list and send_list to be not-empty.
Fixes: 4158266ca0b6 ("nvme-tcp: optimize network stack with setting msg flags according to batch size") Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
We should also bail from the io_work loop when we set rd_enabled to true,
so we don't attempt to read data from the socket when the TCP stream is
already out-of-sync or corrupted.
Fixes: 1fcf4b8ae898 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Ming Lei [Tue, 23 Aug 2022 10:38:19 +0000 (18:38 +0800)]
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
Commit 12639dd88663 ("block, loop: support partitions without scanning")
adds GD_SUPPRESS_PART_SCAN for replacing part function of
GENHD_FL_NO_PART. But looks blk_add_partitions() is missed, since
loop doesn't want to add partitions if GENHD_FL_NO_PART was set.
And it causes regression on libblockdev (as called from udisks) which
operates with the LO_FLAGS_PARTSCAN.
Fixes the issue by not adding partitions if GD_SUPPRESS_PART_SCAN is
set.
Fixes: 12639dd88663 ("block, loop: support partitions without scanning") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220823103819.395776-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'nvme-6.0-2022-09-01' of git://git.infradead.org/nvme into block-6.0
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.0
- error handling fix for the new auth code (Hannes Reinecke)
- fix unhandled tcp states in nvmet_tcp_state_change (Maurizio Lombardi)
- add NVME_QUIRK_BOGUS_NID for Lexar NM610 (Shyamin Ayesh)"
* tag 'nvme-6.0-2022-09-01' of git://git.infradead.org/nvme:
nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
nvmet-auth: add missing goto in nvmet_setup_auth()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610
nvmet-tcp: fix unhandled tcp states in nvmet_tcp_state_change()
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing
so we can ignore them and avoid printing the "unhandled state"
warning message.
[ 1298.852386] nvmet_tcp: queue 2 unhandled state 5
[ 1298.879112] nvmet_tcp: queue 7 unhandled state 5
[ 1298.884253] nvmet_tcp: queue 8 unhandled state 5
[ 1298.889475] nvmet_tcp: queue 9 unhandled state 5
v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore
the fin_wait2 and last_ack states.
Shyamin Ayesh [Fri, 26 Aug 2022 16:51:40 +0000 (09:51 -0700)]
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM610
Lexar NM610 reports bogus eui64 values that appear to be the same across
all drives. Quirk them out so they are not marked as "non globally unique"
duplicates.
Signed-off-by: Shyamin Ayesh <me@shyamin.com>
[patch formatting] Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
Jens Axboe [Wed, 24 Aug 2022 19:58:37 +0000 (13:58 -0600)]
Merge branch 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.0
Pull MD fixes from Song:
"1. Fix for clustered raid, by Guoqing Jiang.
2. req_op fix, by Bart Van Assche.
3. Fix race condition in raid recreate, by David Sloan."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
Fixes: 56c17cbc4063 ("md: move bitmap_destroy to the beginning of __md_stop") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
Guoqing Jiang [Wed, 17 Aug 2022 12:05:13 +0000 (20:05 +0800)]
Revert "md-raid: destroy the bitmap after destroying the thread"
This reverts commit 8d276a45d5cc77f6944b9dd4ec0b4135d083f77f. Because it
obviously breaks clustered raid as noticed by Neil though it fixed KASAN
issue for dm-raid, let's revert it and fix KASAN issue in next commit.
Fixes: 8d276a45d5cc ("md-raid: destroy the bitmap after destroying the thread") Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
David Sloan [Thu, 11 Aug 2022 17:14:13 +0000 (11:14 -0600)]
md: Flush workqueue md_rdev_misc_wq in md_alloc()
A race condition still exists when removing and re-creating md devices
in test cases. However, it is only seen on some setups.
The race condition was tracked down to a reference still being held
to the kobject by the rdev in the md_rdev_misc_wq which will be released
in rdev_delayed_delete().
md_alloc() waits for previous deletions by waiting on the md_misc_wq,
but the md_rdev_misc_wq may still be holding a reference to a recently
removed device.
To fix this, also flush the md_rdev_misc_wq in md_alloc().
Signed-off-by: David Sloan <david.sloan@eideticom.com>
[logang@deltatee.com: rewrote commit message] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
Bart Van Assche [Wed, 10 Aug 2022 18:20:12 +0000 (11:20 -0700)]
md/raid10: Fix the data type of an r10_sync_page_io() argument
Fix the following sparse warning:
drivers/md/raid10.c:2647:60: sparse: sparse: incorrect type in argument 5 (different base types) @@ expected restricted blk_opf_t [usertype] opf @@ got int rw @@
This patch does not change any functionality since REQ_OP_READ = READ = 0
and since REQ_OP_WRITE = WRITE = 1.
Cc: Rong A Chen <rong.a.chen@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 7989bb45ee48 ("md/core: Combine two sync_page_io() arguments") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Song Liu <song@kernel.org>
The userspace can configure a loop using an ioctl call, wherein
a configuration of type loop_config is passed (see lo_ioctl()'s
case on line 1550 of drivers/block/loop.c). This proceeds to call
loop_configure() which in turn calls loop_set_status_from_info()
(see line 1050 of loop.c), passing &config->info which is of type
loop_info64*. This function then sets the appropriate values, like
the offset.
loop_device has lo_offset of type loff_t (see line 52 of loop.c),
which is typdef-chained to long long, whereas loop_info64 has
lo_offset of type __u64 (see line 56 of include/uapi/linux/loop.h).
The function directly copies offset from info to the device as
follows (See line 980 of loop.c):
lo->lo_offset = info->lo_offset;
This results in an overflow, which triggers a warning in iomap_iter()
due to a call to iomap_iter_done() which has:
WARN_ON_ONCE(iter->iomap.offset > iter->pos);
Thus, check for negative value during loop_set_status_from_info().
Currently, in virtio_scsi, if 'bd->last' is not set to true while
dispatching request, such io will stay in driver's queue, and driver
will wait for block layer to dispatch more rqs. However, if block
layer failed to dispatch more rq, it should trigger commit_rqs to
inform driver.
There is a problem in blk_mq_try_issue_list_directly() that commit_rqs
won't be called:
// assume that queue_depth is set to 1, list contains two rq
blk_mq_try_issue_list_directly
blk_mq_request_issue_directly
// dispatch first rq
// last is false
__blk_mq_try_issue_directly
blk_mq_get_dispatch_budget
// succeed to get first budget
__blk_mq_issue_directly
scsi_queue_rq
cmd->flags |= SCMD_LAST
virtscsi_queuecommand
kick = (sc->flags & SCMD_LAST) != 0
// kick is false, first rq won't issue to disk
queued++
blk_mq_request_issue_directly
// dispatch second rq
__blk_mq_try_issue_directly
blk_mq_get_dispatch_budget
// failed to get second budget
ret == BLK_STS_RESOURCE
blk_mq_request_bypass_insert
// errors is still 0
if (!list_empty(list) || errors && ...)
// won't pass, commit_rqs won't be called
In this situation, first rq relied on second rq to dispatch, while
second rq relied on first rq to complete, thus they will both hung.
Fix the problem by also treat 'BLK_STS_*RESOURCE' as 'errors' since
it means that request is not queued successfully.
Same problem exists in blk_mq_dispatch_rq_list(), 'BLK_STS_*RESOURCE'
can't be treated as 'errors' here, fix the problem by calling
commit_rqs if queue_rq return 'BLK_STS_*RESOURCE'.
Yufen Yu [Wed, 3 Aug 2022 02:33:55 +0000 (10:33 +0800)]
blk-mq: run queue no matter whether the request is the last request
We do test on a virtio scsi device (/dev/sda) and the default mq
scheduler is 'none'. We found a IO hung as following:
blk_finish_plug
blk_mq_plug_issue_direct
scsi_mq_get_budget
//get budget_token fail and sdev->restarts=1
scsi_end_request
scsi_run_queue_async
//sdev->restart=0 and run queue
blk_mq_request_bypass_insert
//add request to hctx->dispatch list
//continue to dispath plug list
blk_mq_dispatch_plug_list
blk_mq_try_issue_list_directly
//success issue all requests from plug list
After .get_budget fail, scsi_mq_get_budget will increase 'restarts'.
Normally, it will run hw queue when io complete and set 'restarts'
as 0. But if we run queue before adding request to the dispatch list
and blk_mq_dispatch_plug_list also success issue all requests, then
on one will run queue, and the request will be stall in the dispatch
list and cannot complete forever.
It is wrong to use last request of plug list to decide if run queue is
needed since all the remained requests in plug list may be from other
hctxs. To fix the bug, pass run_queue as true always to
blk_mq_request_bypass_insert().
Fix-suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Fixes: 4efd73597ebd ("block: attempt direct issue of plug list") Link: https://lore.kernel.org/r/20220803023355.3687360-1-yuyufen@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
ZiyangZhang [Mon, 15 Aug 2022 02:36:33 +0000 (10:36 +0800)]
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
In ublk_queue_rq(), Assume current request is a re-issued request aborted
previously in monitor_work because the ubq_daemon(ioucmd's task) is
PF_EXITING. For this request, we cannot call
io_uring_cmd_complete_in_task() anymore because at that moment io_uring
context may be freed in case that no inflight ioucmd exists. Otherwise,
we may cause null-deref in ctx->fallback_work.
Add a check on UBLK_IO_FLAG_ABORTED to prevent the above situation. This
check is safe and makes sense.
Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request
(releasing the tag). Then the request is restarted(allocating the tag)
and we are here. Since releasing/allocating a tag implies smp_mb(),
finding UBLK_IO_FLAG_ABORTED guarantees that here is a re-issued request
aborted previously.
ZiyangZhang [Mon, 15 Aug 2022 02:36:32 +0000 (10:36 +0800)]
ublk_drv: update comment for __ublk_fail_req()
Since __ublk_rq_task_work always fails requests immediately during
exiting, __ublk_fail_req() is only called from abort context during
exiting. So lock is unnecessary.
ZiyangZhang [Wed, 10 Aug 2022 05:52:12 +0000 (13:52 +0800)]
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
If ublksrv sends UBLK_IO_NEED_GET_DATA with new allocated io buffer, we
have to update iod->addr in task_work before calling io_uring_cmd_done().
Then usersapce target can handle (write)io request with the new io
buffer reading from updated iod.
Without this change, userspace target may touch a wrong io buffer!
Rafael Mendonca [Thu, 11 Aug 2022 23:23:37 +0000 (20:23 -0300)]
block: Do not call blk_put_queue() if gendisk allocation fails
Commit 11c28a1a6c40 ("block: simplify disk shutdown") removed the call
to blk_get_queue() during gendisk allocation but missed to remove the
corresponding cleanup code blk_put_queue() for it. Thus, if the gendisk
allocation fails, the request_queue refcount gets decremented and
reaches 0, causing blk_mq_release() to be called with a hctx still
alive. That triggers a WARNING report, as found by syzkaller:
Jens Axboe [Thu, 11 Aug 2022 14:37:48 +0000 (08:37 -0600)]
Merge tag 'nvme-6.0-2022-08-11' of git://git.infradead.org/nvme into block-6.0
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.0
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in nvme-fc
(Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu)"
* tag 'nvme-6.0-2022-08-11' of git://git.infradead.org/nvme:
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Dennis P. Kliem [Thu, 11 Aug 2022 10:56:57 +0000 (12:56 +0200)]
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
ADATA XPG GAMMIX S70 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Signed-off-by: Dennis P. Kliem <dpkliem@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme-tcp: check if the queue is allocated before stopping it
When an error is detected and the host reconnects, the
nvme_tcp_error_recovery_work() function is called and starts
tearing down the io queues and de-allocating them;
If at the same time the "nvme" process deletes the controller via sysfs,
the nvme_tcp_delete_ctrl() gets called and waits until the
nvme_tcp_error_recovery_work() finishes its job; then starts
tearing down the io queues, but at this point they have already
been freed and the mutexes are destroyed.
Calling mutex_lock() against a destroyed mutex triggers a warning:
"nvme-fc: fold t fc_update_appid into fc_appid_store" accidentally
changed the userspace interface for the appid attribute, because the code
that decrements "count" to remove a trailing '\n' in the parsing results
in the decremented value being incorrectly be returned from the sysfs
write. Fix this by keeping an orig_count variable for the full length
of the write.
Fixes: 076626b9206d ("nvme-fc: fold t fc_update_appid into fc_appid_store") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Tested-by: Muneendra Kumar M <muneendra.kumar@broadcom.com>
Ming Lei [Thu, 21 Jul 2022 00:33:58 +0000 (08:33 +0800)]
nvme-fc: restart admin queue if the caller needs to restart queue
Without restarting admin queue in __nvme_fc_abort_outstanding_ios(),
it leaves controller not capable of handling admin pt request, and
causes io hang.
Fixes it by restarting admin queue if the caller of __nvme_fc_abort_outstanding_ios
requires to restart queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: James Smart <jsmart2021@gmail.com> Tested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Fri, 5 Aug 2022 03:00:14 +0000 (20:00 -0700)]
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
Linus Torvalds [Fri, 5 Aug 2022 02:54:32 +0000 (19:54 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud
environment. Otherwise the changes are dominated by rxe fixes.
There is another RDMA driver on the list that might get merged next
cycle, 'MANA' for the Azure cloud environment.
Summary:
- Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5
- General spelling/grammer fixes
- rdma cm can follow changes in neighbours for control packets
- Significant amounts of rxe fixes and spec compliance changes
- Use the modern NAPI API
- Use the bitmap API instead of open coding
- Performance improvements for rtrs
- Add the ERDMA driver for Alibaba cloud
- Fix a use after free bug in SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv()
RDMA/rxe: Fix error unwind in rxe_create_qp()
RDMA/mlx5: Add missing check for return value in get namespace flow
RDMA/rxe: Split qp state for requester and completer
RDMA/rxe: Generate error completion for error requester QP state
RDMA/rxe: Update wqe_index for each wqe error completion
RDMA/srpt: Fix a use-after-free
RDMA/srpt: Introduce a reference count in struct srpt_device
RDMA/srpt: Duplicate port name members
IB/qib: Fix repeated "in" within comments
RDMA/erdma: Add driver to kernel build environment
RDMA/erdma: Add the ABI definitions
RDMA/erdma: Add the erdma module
RDMA/erdma: Add connection management (CM) support
RDMA/erdma: Add verbs implementation
RDMA/erdma: Add verbs header file
RDMA/erdma: Add event queue implementation
RDMA/erdma: Add cmdq implementation
RDMA/erdma: Add main include file
RDMA/erdma: Add the hardware related definitions
...
Linus Torvalds [Fri, 5 Aug 2022 02:47:37 +0000 (19:47 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
Linus Torvalds [Fri, 5 Aug 2022 02:41:09 +0000 (19:41 -0700)]
Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for the asynchronous SDIO wakeup interrupts
- Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap
- Add support to store error stats from host drivers
- Extend debugfs to show error stats from host drivers
- Add single I/O read support in the recovery path for 4k sector cards
MMC host:
- dw_mmc-exynos: Convert corresponding DT bindings to the dtschema
- dw_mmc-rockchip: Add support for the Rockchip RV1126 variant
- mmc_spi: Convert corresponding DT bindings to the dtschema
- mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode
- mtk-sd: Add support for SDIO wake irqs
- mtk-sd: Add support for the Mediatek MT8188 variant
- renesas_sdhi: Drop redundant manual tap correction for newer SoCs
- renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants
- sdhci/cqhci: Add support to capture stats from host errors
- sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0
- sdhci-msm: Add support for the MSM8998 and SM8450 variant
- sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R
- sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
- sdhci-of-dwcmshc: Enable reset support for the Rockchip variants
- sdhci-pci-gli: Improve I/O read/write performance for GL9763E
- sdhci-s3c: Convert corresponding DT bindings to the dtschema
- tmio: Avoid glitches when resetting
MEMSTICK core:
- A couple of minor fixes and cleanups"
* tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits)
mmc: mediatek: add support for SDIO eint wakup IRQ
mmc: core: Add support for SDIO wakeup interrupt
dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126
mmc: renesas_sdhi: newer SoCs don't need manual tap correction
mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
mmc: cavium-octeon: Add of_node_put() when breaking out of loop
mmc: core: quirks: Add of_node_put() when breaking out of loop
mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible
mmc: sdhci-msm: drop redundant of_device_id entries
dt-bindings: mmc: sdhci-msm: add MSM8998
mmc: block: Add single read for 4k sector cards
mmc: mxcmmc: Use mmc_card_sdio macro
mmc: core: Use mmc_card_* macro and add a new for the sd_combo type
dt-bindings: mmc: sdhci-msm: constrain reg-names per variants
dt-bindings: mmc: sdhci-msm: fix reg-names entries
dt-bindings: mmc: Add compatible for MediaTek MT8188
dt-bindings: mmc: sdhci-msm: document resets
mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
...
Linus Torvalds [Fri, 5 Aug 2022 02:30:35 +0000 (19:30 -0700)]
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
Linus Torvalds [Fri, 5 Aug 2022 01:44:38 +0000 (18:44 -0700)]
Merge tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support / Core:
- Remove DMA_MEMCPY_SG for lack of users
- Tegra 234 dmaengine support
- Mediatek MT8365 dma support
- Apple ADMAC driver
Updates:
- Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma
- rz-dmac updates and device_synchronize support
- Bunch of typo in comments fixes in drivers
- multithread support in sf-pdma driver"
* tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits)
dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment
dmaengine: axi-dmac: check cache coherency register
dmaengine: sh: rz-dmac: Add device_synchronize callback
dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
dmaengine: tegra: Add terminate() for Tegra234
dt-bindings: dmaengine: Add compatible for Tegra234
dmaengine: xilinx: use strscpy to replace strlcpy
dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script
dmaengine: idxd: Correct IAX operation code names
dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)
dmaengine: dw-axi-dmac: ignore interrupt if no descriptor
dmaengine: dw-axi-dmac: do not print NULL LLI during error
dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions
dmaengine: imx-sdma: Add missing struct documentation
dmaengine: sf-pdma: Add multithread support for a DMA channel
dt-bindings: dma: dw-axi-dmac: extend the number of interrupts
dmaengine: dmatest: use strscpy to replace strlcpy
dmaengine: ste_dma40: fix typo in comment
dmaengine: jz4780: fix typo in comment
dmaengine: s3c24xx: fix typo in comment
...
Linus Torvalds [Fri, 5 Aug 2022 01:40:08 +0000 (18:40 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The clk core gains a new set of APIs that allow drivers to both
acquire clks and prepare and enable them at the same time. This also
comes with devm support so that drivers can make a single call to get
and prepare and enable the clk and have that all undone when their
driver is removed.
Many folks have requested this feature over the years, but we've had
disagreements about how to implement it and if it was worthwhile to
encourage drivers to use such an API.
Now it's here, so let's see how it goes.
I hope that by introducing this API we can identify drivers that would
benefit from further consolidation of clk API usage, possibly by
moving such logic to the bus layer and out of drivers altogether.
Outside of that major API update, we have the usual collection of
driver updates. A few new SoCs are supported, mostly Qualcomm and
Renesas this time around. Then we have the long tail of non-critical
fixes and minor feature additions to various clk drivers.
And finally more clk provider migration to struct clk_parent_data,
reducing boot times in the process.
Summary:
Core:
- devm helpers for clk_get() + clk_prepare() and clk_enable()
New Drivers:
- Support for the camera clock controller in Qualcomm SM8450 and the
display and gpu clock controllers in Qualcomm SM8350
- Add support for the Renesas RZ/Five SoC
Updates:
- Various fixes, new clocks and USB GDSCs are introduced for Qualcomm
IPQ8074
- Fixes to Qualcomm MSM8939 for issues introduced by inheriting the
MSM8916 GCC driver
- Support for a new type of voteable GDSCs used by Qualcomm SC8280XP
PCIe GDSCs
- Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux
implementation
- Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994
GCC are migrated to use clk_parent_data
- Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845
and SM8250
- Qualcomm MSM8916 gains more possible frequencies for its GP clocks.
- The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic
the design in IPQ8074 to allow the GCC driver to probe earlier.
- The regulator based mmcx supply for Qualcomm dispcc and videocc is
dropped, as the only upstream target that adapted this interface
was transitioned several kernel versions ago
- Qualcomm GDSCs found to be enabled at boot will now reflect in the
enable count of the supply, as was done with the regulator supplies
previously
- Correct adc1, nic_media and edma1's parents for NXP i.MX93
- rdiv, mfd values, the return rate in recalc_rate and add more
frequencies in the table for fracn-gppll on i.MX
- Remove Allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- deduplicate Allwinner ccu_clks arrays
- Allwinner H6 GPU DFS support
- Adjust Allwinner Kconfig to limit choice
- Fix initconst confusion on Renesas R-Car Gen4
- Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L
- Add PFC and WDT clocks and resets on Renesas RZ/V2M
- Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
Renesas R-Car S4-8"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits)
clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
clk: qcom: clk-rpm: convert to parent_data API
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
clk: qcom: fix build error initializer element is not constant
clk: sprd: Add dt-bindings include file for UMS512
dt-bindings: clk: sprd: Add bindings for ums512 clock controller
clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
clk: qcom: add support for SM8350 DISPCC
...
Linus Torvalds [Fri, 5 Aug 2022 01:34:05 +0000 (18:34 -0700)]
Merge tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Here are the updates for this merge window from the GPIO subsystem.
We have more lines removed than added thanks to dropping of a driver
for a platform that's no longer supported. Otherwise the changes are
pretty straightforward: support for some new models, various
improvements to existing drivers, some tweaks to the core library code
and DT bindings updates.
Summary:
- remove gpio-vr41xx driver as the only platform using it got dropped
too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the
document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in
drivers
- reduce using magic numbers and improve code readability in several
drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements"
* tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits)
dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles
gpio: 74xx-mmio: Use bits instead of plain numbers for flags
gpio: xilinx: add missing blank line after declarations
MAINTAINERS: Update Intel 8255 GPIO driver file list
gpio: gpio-mm: Implement and utilize register structures
gpio: 104-idi-48: Implement and utilize register structures
gpio: 104-dio-48e: Implement and utilize register structures
gpio: i8255: Introduce the Intel 8255 interface library module
gpio: 104-idio-16: Implement and utilize register structures
gpio: ws16c48: Implement and utilize register structures
gpio: remove VR41XX related gpio driver
dt-bindings: gpio: add pull-disable flag
gpiolib: acpi: support bias pull disable
gpiolib: of: support bias pull disable
gpiolib: add support for bias pull disable
gpio: 74xx-mmio: use bits.h macros for all masks
gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
gpio: 74xx-mmio: Make use of device properties
gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
gpiolib: cdev: consolidate edge detector configuration flags
...
Linus Torvalds [Fri, 5 Aug 2022 01:19:14 +0000 (18:19 -0700)]
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Linus Torvalds [Fri, 5 Aug 2022 01:08:34 +0000 (18:08 -0700)]
Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
Linus Torvalds [Fri, 5 Aug 2022 01:04:28 +0000 (18:04 -0700)]
Merge tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)
- XP-PEN Deco L support (José Expósito)
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
- other small assorted fixes and device ID additions
* tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: amd_sfh: Handle condition of "no sensors"
HID: amd_sfh: Fix implicit declaration error on i386
HID: apple: Add "GANSS" to the non-Apple list
HID: alps: Declare U1_UNICORN_LEGACY support
HID: wacom: Force pen out of prox if no events have been received in a while
HID: nintendo: Add missing array termination
HID: lg-g15: Fix comment typo
HID: amd_sfh: Implement SFH1.1 functionality
HID: amd_sfh: Move interrupt handling to common interface
HID: amd_sfh: Move amd_sfh_work to common interface
HID: amd_sfh: Move global functions to static
HID: amd_sfh: Add remove operation in amd_mp2_ops
HID: amd_sfh: Add PM operations in amd_mp2_ops
HID: amd_sfh: Add descriptor operations in amd_mp2_ops
HID: amd_sfh: Move request_list variable to client data
HID: amd_sfh: Move request_list struct to header file
HID: amd_sfh: Move common macros and structures
HID: amd_sfh: Add NULL check for hid device
HID: core: remove unneeded assignment in hid_process_report()
ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments
...
Linus Torvalds [Thu, 4 Aug 2022 22:35:58 +0000 (15:35 -0700)]
Merge tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- support KCOV
- enable ARCH_HAS_GCOV_PROFILE_ALL
- minor ISS network driver cleanups
* tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: enable ARCH_HAS_GCOV_PROFILE_ALL
xtensa: enable KCOV support
xtensa: iss: fix handling error cases in iss_net_configure()
xtensa: iss/network: provide release() callback
xtensa: iss/network: drop 'devices' list
Linus Torvalds [Thu, 4 Aug 2022 22:27:20 +0000 (15:27 -0700)]
Merge tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux
Pull csky updates from Guo Ren:
- Add jump-label implementation
- Add qspinlock support
- Enable ARCH_INLINE_READ*/WRITE*/SPIN*
- Some fixups and a coding convention
* tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux:
csky: abiv1: Fixup compile error
csky: cmpxchg: Coding convention for BUILD_BUG()
csky: Enable ARCH_INLINE_READ*/WRITE*/SPIN*
csky: Add qspinlock support
csky: Add jump-label implementation
csky: Move HEAD_TEXT_SECTION out of __init_begin-end
csky: Correct position of _stext
csky: Use the bitmap API to allocate bitmaps
csky/kprobe: reclaim insn_slot on kprobe unregistration
Linus Torvalds [Thu, 4 Aug 2022 22:20:39 +0000 (15:20 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Noren Egtvedt:
"Mostly changes to documentation and comments"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
video:backlight: remove reference to AVR32 architecture in ltv350qv
video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb
usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig
sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver
net: remove cdns,at32ap7000-macb device tree entry
misc: update maintainer email address and description for atmel-ssc
mfd: remove reference to AVR32 architecture in atmel-smc.c
dma:dw: remove reference to AVR32 architecture in core.c
Eric Farman [Thu, 4 Aug 2022 21:39:26 +0000 (23:39 +0200)]
s390/dasd: Establish DMA alignment
linux-next commit b45bd7907ca3 ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.
Make this change for both ECKD and DIAG disciplines, as they both
would fall into this category. Leave FBA alone, since it is always
comprised of 512-byte blocks.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220804213926.3361574-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 4 Aug 2022 22:10:55 +0000 (15:10 -0700)]
Merge tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series fine tuning virtio support for Xen guests, including removal
the now again unused "platform_has()" feature.
- a fix for host admin triggered reboot of Xen guests
- a simple spelling fix
* tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't require virtio with grants for non-PV guests
kernel: remove platform_has() infrastructure
virtio: replace restricted mem access flag with callback
xen: Fix spelling mistake
xen/manage: Use orderly_reboot() to reboot
Linus Torvalds [Thu, 4 Aug 2022 21:59:54 +0000 (14:59 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
Sudip Mukherjee [Thu, 4 Aug 2022 18:01:46 +0000 (19:01 +0100)]
drm/amd/amdgpu: fix build failure due to implicit declaration
The builds for alpha and mips allmodconfig fails with the error:
drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:23: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:21: error: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:545:33: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
Linus Torvalds [Thu, 4 Aug 2022 19:12:54 +0000 (12:12 -0700)]
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Linus Torvalds [Thu, 4 Aug 2022 19:01:42 +0000 (12:01 -0700)]
Merge tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver patches for 6.0-rc1.
Another round where we removed more lines of code than added, always a
nice progression. Some of that came from the movement of the vme code
back into staging, and removal of some other of the vme driver code as
there are no known users and it is very obsolete and unmaintained. It
can be added back easily if someone offers to maintain it.
Other than that this merge has lots of little things:
- huge cleanups for r8188eu driver
- minor cleanups for other wifi drivers
- tiny loop fixes for greybus code
- other small coding style fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits)
staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c
staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup
staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function
staging: vt6655: Rename MACvClearStckDS
staging: fbtft: core: set smem_len before fb_deferred_io_init call
staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
staging: r8188eu: make dump_chip_info() static
staging: r8188eu: remove DoReserved prototype
staging: r8188eu: remove OnAtim prototype
staging: r8188eu: remove SetHwReg8188EU()
staging: r8188eu: make update_TSF() and correct_TSF() static
staging: r8188eu: remove unused parameter from update_TSF()
staging: r8188eu: remove unused parameter from correct_TSF()
staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
staging: pi433: remove duplicated comments
staging: qlge: refine variable name
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function
...
usb: cdns3: Don't use priv_dev uninitialized in cdns3_gadget_ep_enable()
Clang warns:
drivers/usb/cdns3/cdns3-gadget.c:2290:11: error: variable 'priv_dev' is uninitialized when used here [-Werror,-Wuninitialized]
dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
^~~~~~~~
include/linux/dev_printk.h:155:18: note: expanded from macro 'dev_dbg'
dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~
include/linux/dynamic_debug.h:167:7: note: expanded from macro 'dynamic_dev_dbg'
dev, fmt, ##__VA_ARGS__)
^~~
include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
drivers/usb/cdns3/cdns3-gadget.c:2278:31: note: initialize the variable 'priv_dev' to silence this warning
struct cdns3_device *priv_dev;
^
= NULL
1 error generated.
The priv_dev assignment was moved below the if statement to avoid
potentially dereferencing ep before it was checked but priv_dev is used
in the dev_dbg() call.
To fix this, move the priv_dev and comp_desc assignments back to their
original spot and hoist the ep check above those assignments with a call
to pr_debug() instead of dev_dbg().
Fixes: 11d42d0ac32a ("usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()") Link: https://github.com/ClangBuiltLinux/linux/issues/1680 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 4 Aug 2022 18:41:28 +0000 (11:41 -0700)]
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Linus Torvalds [Thu, 4 Aug 2022 18:31:20 +0000 (11:31 -0700)]
Merge tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
Linus Torvalds [Thu, 4 Aug 2022 18:05:48 +0000 (11:05 -0700)]
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
Bjorn Helgaas [Thu, 4 Aug 2022 16:46:53 +0000 (11:46 -0500)]
Merge branch 'pci/header-cleanup-immutable'
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and
ATA_SECONDARY_IRQ() instead (Stafford Horne)
- Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used
(Stafford Horne)
- Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne)
- Move common PCI definitions that arches sometimes override to
asm-generic/pci.h (Stafford Horne)
- Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed
(bisection hole here) (Randy Dunlap)
* pci/header-cleanup-immutable:
PCI: Stub __pci_ioport_map() for arches that don't support it at all
x86/cyrix: include header linux/isa-dma.h
asm-generic: Add new pci.h and use it
csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE
PCI: Move isa_dma_bridge_buggy out of asm/dma.h
PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:57 +0000 (11:41 -0500)]
Merge branch 'pci/ctrl/mediatek-gen3'
- Fix refcount leak in mtk_pcie_init_irq_domains() (Miaoqian Lin)
- Print decoded LTSSM state when the link doesn't come up (Jianjun Wang)
* pci/ctrl/mediatek-gen3:
PCI: mediatek-gen3: Print LTSSM state when PCIe link down
PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:55 +0000 (11:41 -0500)]
Merge branch 'pci/ctrl/imx6'
- Factor out ref clock disables to match enables (Bjorn Helgaas)
- Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu)
- Propagate regulator and clock errors back to .host_init() caller (Richard
Zhu)
- Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu)
- Call host init function directly in resume instead of duplicating the
code (Richard Zhu)
- Turn off regulators when suspending (Richard Zhu)
- Make link being down a non-fatal error so probe doesn't fail (Richard
Zhu)
- Start link in resume only if it was up before suspend to reduce resume
time (Richard Zhu)
- Move PHY init and power-on out of clock- and reset-related functions
(Richard Zhu)
- Rework suspend callback to be more symmetric with resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
* pci/ctrl/imx6:
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
- Move eDMA private data from struct dw_edma to struct dw_edma_chip (Frank
Li)
- Convert "struct dw_edma_region rg_region" to "void __iomem *reg_base"
since only the virtual address (not physical address or size) is used
(Frank Li)
- Rename "*_ch_cnt" to "ll_*_cnt" to reflect actual usage (Frank Li)
- Drop dma_slave_config.direction field usage (Serge Semin)
- Fix eDMA Rd/Wr-channels and DMA-direction semantics (Serge Semin)
- Add chip-specific DW_EDMA_CHIP_LOCAL flag to indicate that local eDMA
doesn't require generating MSIs to remote (Frank Li)
- Enable DMA tests for endpoints that support it (Frank Li)
* pci/ctrl/dwc-edma:
PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities
dmaengine: dw-edma: Add support for chip-specific flags
dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
dmaengine: dw-edma: Drop dma_slave_config.direction field usage
dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chip
dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip
dmaengine: dw-edma: Detach the private data and chip info structures
dmaengine: dw-edma: Remove unused irq field in struct dw_edma_chip
- Detect iATU region size from hardware (Serge Semin)
- Validate iATU outbound mappings against hardware constraints (Serge
Semin)
- Check for errors in iATU setup (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit address
(Will McVicker)
- Use the bitmap API to allocate bitmaps instead of open-coding it
(Christophe JAILLET)
- Correct dw_pcie_free_msi() checking for when to remove IRQ handler and
data (Dmitry Baryshkov)
- Split MSI init to new dw_pcie_msi_host_init() function (Dmitry Baryshkov)
- Convert struct pcie_port.msi_irq to an array so we can support more than
32 MSI interrupts (Dmitry Baryshkov)
- Handle MSIs routed to multiple GIC interrupts for Qualcomm platforms with
groups of 32 MSI vectors (Dmitry Baryshkov)
- Add additional MSI interrupts to qcom DT (Dmitry Baryshkov)
* pci/ctrl/dwc:
dt-bindings: PCI: qcom: Support additional MSI vectors
PCI: dwc: Handle MSIs routed to multiple GIC interrupts
PCI: dwc: Convert struct pcie_port.msi_irq to an array
PCI: dwc: Split MSI IRQ parsing/allocation to a separate function
PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
PCI: dwc: Use the bitmap API to allocate bitmaps
PCI: dwc: Fix MSI msi_msg DMA mapping
PCI: dwc: Check iATU in/outbound range setup status
PCI: dwc: Validate iATU outbound mappings against hardware constraints
PCI: dwc: Add iATU regions size detection procedure
PCI: dwc: Simplify in/outbound iATU setup methods
PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB
PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO
PCI: dwc: Add dw_pcie_ops.host_deinit() callback
PCI: tegra194: Drop manual DW PCIe controller version setup
PCI: intel-gw: Drop manual DW PCIe controller version setup
PCI: dwc: Add macros to compare Synopsys IP core versions
PCI: dwc: Read DWC IP core version from register
PCI: dwc: Use native DWC IP core version representation
PCI: dwc: Detect iATU settings after getting "addr_space" resource
PCI: dwc: Log link speed and width if it comes up
PCI: dwc-plat: Drop dw_plat_pcie_of_match[] forward declaration
PCI: dwc-plat: Drop unused regmap pointer
PCI: dwc-plat: Simplify dw_plat_pcie_probe() return values
PCI: dwc: Rename struct pcie_port to dw_pcie_rp
PCI: dwc: Move io_cfg_atu_shared to struct pcie_port
PCI: dwc: Add start_link/stop_link inlines
PCI: dwc: Reuse local pointer to the resource data
PCI: dwc: Organize local variable usage
PCI: dwc: Convert dw_pcie_link_up() to use dw_pcie_readl_dbi()
PCI: dwc: Simplify unrolled iATU detection
PCI: dwc: Add newlines to log messages
PCI: dwc: Add braces to multi-line if-else statements
PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists
PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors
PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address
PCI: dwc: Disable outbound windows only for controllers using iATU
PCI: dwc: Add unroll iATU space support to dw_pcie_disable_atu()
PCI: dwc: Stop link on host_init errors and de-initialization
- Prevent config space access when link is down (Jim Quinlan)
- Split post-link up initialization to brcm_pcie_start_link() (Jim Quinlan)
- Enable child bus device regulators described under Root Ports in DT (Jim
Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
- Rename .map_bus() functions to end with 'map_bus' as they do in other
drivers (Jim Quinlan)
* pci/ctrl/brcmstb:
PCI: brcmstb: Rename .map_bus() functions to end with 'map_bus'
PCI: brcmstb: Disable/enable regulators in suspend/resume
PCI: brcmstb: Enable child bus device regulators from DT
PCI: brcmstb: Split post-link up initialization to brcm_pcie_start_link()
PCI: brcmstb: Prevent config space access when link is down
PCI: brcmstb: Remove unnecessary forward declarations
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:52 +0000 (11:41 -0500)]
Merge branch 'pci/resource'
- Replace sparc pci_mmap_page_range() wrapper. This still leaves a
sparc-specific pci_mmap_resource_range(), but it's only one interface
instead of two (Arnd Bergmann)
- Remove sparc-specific pci_mmap_resource_range() by implementing
pci_iobar_pfn(). This removes the ability to map the entire PCI I/O
space using /proc/bus/pci, but we believe that's already been broken
since v2.6.28 (Arnd Bergmann)
* pci/resource:
sparc: Use generic pci_mmap_resource_range()
PCI: Remove pci_mmap_page_range() wrapper
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:52 +0000 (11:41 -0500)]
Merge branch 'pci/err'
- Recognize disconnected devices so we don't bother trying to set them to
"frozen" or "normal" state (Christoph Hellwig)
- Clear PCI Status register during enumeration in case firmware left errors
logged (Kai-Heng Feng)
- Configure ECRC for every device, including hot-added ones (Stefan Roese)
- Keep AER error reporting enabled for switches (Stefan Roese)
- Enable error reporting for all devices that support AER (Stefan Roese)
- Iterate over error counters instead of error strings to avoid printing
junk in AER sysfs counters (Mohamed Khalfella)
* pci/err:
PCI/AER: Iterate over error counters instead of error strings
PCI/AER: Enable error reporting when AER is native
PCI/portdrv: Don't disable AER reporting in get_port_device_capability()
PCI/AER: Configure ECRC for every device
PCI: Clear PCI_STATUS when setting up device
PCI/ERR: Recognize disconnected devices in report_error_detected()
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:51 +0000 (11:41 -0500)]
Merge branch 'pci/enumeration'
- Split out ARI "next function" handling from the traditional one (Niklas
Schnelle)
- Move jailhouse "isolated function" (non-zero functions where function 0
doesn't exist) handling to pci_scan_slot() to avoid duplicating
multi-function scanning in pci_scan_child_bus_extend() (Niklas Schnelle)
- Extend "isolated function" probing to s390 (Niklas Schnelle).
- Allow s390 zPCI zbus without a function 0 (Niklas Schnelle)
* pci/enumeration:
s390/pci: allow zPCI zbus without a function zero
PCI: Extend isolated function probing to s390
PCI: Move jailhouse's isolated function handling to pci_scan_slot()
PCI: Split out next_ari_fn() from next_fn()
PCI: Clean up pci_scan_slot()
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
Linus Torvalds [Thu, 4 Aug 2022 02:23:51 +0000 (19:23 -0700)]
Merge tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new drivers: Microchip CoreI2C, Renesas RZV2M
- quite some DT schema conversions and extensions
- and a bunch of driver updates and improvements
* tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
i2c: extend documentation about retvals of master_xfer functions
i2c: mux-gpmux: Add of_node_put() when breaking out of loop
dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126
i2c: qcom-geni: Use the correct return value
i2c: cadence: Support PEC for SMBus block read
i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
i2c: brcmstb: Use dev_name() for adapter name
i2c: Add Renesas RZ/V2M controller
dt-bindings: i2c: Document RZ/V2M I2C controller
i2c: mlxcpld: Add callback to notify probing completion
i2c: scmi: Replace open coded device_get_match_data()
i2c: stm32: add support for the STM32MP13 soc
dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
i2c: add support for microchip fpga i2c controllers
i2c: i801: Add support for Intel Meteor Lake-P
dt-bindings: i2c: nomadik: Add power domain to binding
dt-bindings: i2c: nomadik: Drop unused voltage supply from example
i2c: Fix a potential use after free
i2c: hisi: use HZ_PER_KHZ macro in units.h
...
projects / kernel.git / log