Ursula Braun [Wed, 9 Oct 2019 08:07:45 +0000 (10:07 +0200)]
net/smc: increase device refcount for added link group
SMCD link groups belong to certain ISM-devices and SMCR link group
links belong to certain IB-devices. Increase the refcount for
these devices, as long as corresponding link groups exist.
Ursula Braun [Wed, 9 Oct 2019 08:07:43 +0000 (10:07 +0200)]
net/smc: separate SMCD and SMCR link group lists
Currently SMCD and SMCR link groups are maintained in one list.
To facilitate abnormal termination handling they are split into
a separate list for SMCR link groups and separate lists for SMCD
link groups per SMCD device.
Biao Huang [Wed, 9 Oct 2019 07:33:48 +0000 (15:33 +0800)]
net: stmmac: dwmac-mediatek: fix wrong delay value issue when resume back
mac_delay value will be divided by 550/170 in mt2712_delay_ps2stage(),
which is invoked at the beginning of mt2712_set_delay(), and the value
should be restored at the end of mt2712_set_delay().
Or, mac_delay will be divided again when invoking mt2712_set_delay()
when resume back.
So, add mt2712_delay_stage2ps() to mt2712_set_delay() to recovery the
original mac_delay value.
Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Xin Long says:
====================
There are 4 events defined in rfc5061 missed in linux sctp:
SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED, SCTP_ADDR_MADE_PRIM and
SCTP_SEND_FAILED_EVENT.
This patchset is to add them up.
====================
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Xin Long [Tue, 8 Oct 2019 11:27:36 +0000 (19:27 +0800)]
sctp: add SCTP_SEND_FAILED_EVENT event
This patch is to add a new event SCTP_SEND_FAILED_EVENT described in
rfc6458#section-6.1.11. It's a update of SCTP_SEND_FAILED event:
struct sctp_sndrcvinfo ssf_info is replaced with
struct sctp_sndinfo ssfe_info in struct sctp_send_failed_event.
SCTP_SEND_FAILED is being deprecated, but we don't remove it in this
patch. Both are being processed in sctp_datamsg_destroy() when the
corresp event flag is set.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Xin Long [Tue, 8 Oct 2019 11:27:35 +0000 (19:27 +0800)]
sctp: add SCTP_ADDR_MADE_PRIM event
sctp_ulpevent_nofity_peer_addr_change() would be called in
sctp_assoc_set_primary() to send SCTP_ADDR_MADE_PRIM event
when this transport is set to the primary path of the asoc.
This event is described in rfc6458#section-6.1.2:
SCTP_ADDR_MADE_PRIM: This address has now been made the primary
destination address. This notification is provided whenever an
address is made primary.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Xin Long [Tue, 8 Oct 2019 11:27:34 +0000 (19:27 +0800)]
sctp: add SCTP_ADDR_REMOVED event
sctp_ulpevent_nofity_peer_addr_change() is called in
sctp_assoc_rm_peer() to send SCTP_ADDR_REMOVED event
when this transport is removed from the asoc.
This event is described in rfc6458#section-6.1.2:
SCTP_ADDR_REMOVED: The address is no longer part of the
association.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Xin Long [Tue, 8 Oct 2019 11:27:33 +0000 (19:27 +0800)]
sctp: add SCTP_ADDR_ADDED event
A helper sctp_ulpevent_nofity_peer_addr_change() will be extracted
to make peer_addr_change event and enqueue it, and the helper will
be called in sctp_assoc_add_peer() to send SCTP_ADDR_ADDED event.
This event is described in rfc6458#section-6.1.2:
SCTP_ADDR_ADDED: The address is now part of the association.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
As noticed by Jakub, this is no longer needed after
commit be785e0ec91f ("tun: fix memory leak in error path")
This no longer exports dev_get_valid_name() for the exclusive
use of tun driver.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jiri Pirko [Tue, 8 Oct 2019 11:01:51 +0000 (13:01 +0200)]
net: tipc: prepare attrs in __tipc_nl_compat_dumpit()
__tipc_nl_compat_dumpit() calls tipc_nl_publ_dump() which expects
the attrs to be available by genl_dumpit_info(cb)->attrs. Add info
struct and attr parsing in compat dumpit function.
Reported-by: syzbot+8d37c50ffb0f52941a5e@syzkaller.appspotmail.com Fixes: 3a3cc4be2327 ("net: tipc: have genetlink code to parse the attrs during dumpit") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jiri Pirko [Tue, 8 Oct 2019 10:31:43 +0000 (12:31 +0200)]
net: genetlink: always allocate separate attrs for dumpit ops
Individual dumpit ops (start, dumpit, done) are locked by genl_lock
if !family->parallel_ops. However, multiple
genl_family_rcv_msg_dumpit() calls may in in flight in parallel.
Each has a separate struct genl_dumpit_info allocated
but they share the same family->attrbuf. Fix this by allocating separate
memory for attrs for dumpit ops, for non-parallel_ops (for parallel_ops
it is done already).
Reported-by: syzbot+495688b736534bb6c6ad@syzkaller.appspotmail.com Reported-by: syzbot+ff59dc711f2cff879a05@syzkaller.appspotmail.com Reported-by: syzbot+dbe02e13bcce52bcf182@syzkaller.appspotmail.com Reported-by: syzbot+9cb7edb2906ea1e83006@syzkaller.appspotmail.com Fixes: aa97a7fc27d2 ("net: genetlink: parse attrs and store in contect info struct during dumpit") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Yunsheng Lin [Tue, 8 Oct 2019 01:20:09 +0000 (09:20 +0800)]
net: hns3: support tx-scatter-gather-fraglist feature
The hardware supports up to 8 TX BD for non-tso skb and up to
63 TX BD for TSO skb. Currently, the hns3 driver supports RX skb
with fraglist when HW GRO is enabled, when the stack forwards a
RX skb with fraglist, the stack need to linearize the skb before
sending to other interface without TX fraglist support.
This patch adds support for TX fraglist. The performance increases
from 1 GByte to 1.5 GByte for one iperf TCP stream during
forwarding test after this patch. BTW, the minimum BD number of
ring should be updated to 72 for supporting TX fraglist.
This patch also changes the error handling of some function that
called by hns3_fill_desc, which returns BD num when there is no
error, change some macro to more meaningful name.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Huazhong Tan [Tue, 8 Oct 2019 01:20:08 +0000 (09:20 +0800)]
net: hns3: add support for configuring VF MAC from the host
This patch adds support of configuring VF MAC from the host
for the HNS3 driver.
BTW, the parameter init in the hns3_init_mac_addr is
unnecessary now, since the MAC address will not read from
NCL_CONFIG when doing reset, so it should be removed,
otherwise it will affect VF's MAC address initialization.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Yonglong Liu [Tue, 8 Oct 2019 01:20:07 +0000 (09:20 +0800)]
net: hns3: add support for configuring bandwidth of VF on the host
This patch adds support for configuring bandwidth of VF on the host
for HNS3 drivers.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jian Shen [Tue, 8 Oct 2019 01:20:06 +0000 (09:20 +0800)]
net: hns3: add support for setting VF trust
This patch adds supports for setting VF trust by host. If specified
VF is trusted, then it can enable promisc(include allmulti mode).
If a trusted VF enabled promisc, and being untrusted, host will
disable promisc mode for this VF.
For VF will update its promisc mode from set_rx_mode now, so it's
unnecessary to set broadcst promisc mode when initialization or
reset.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Jian Shen [Tue, 8 Oct 2019 01:20:05 +0000 (09:20 +0800)]
net: hns3: add support for spoof check setting
This patch adds support for spoof check configuration for VFs.
When it is enabled, "spoof checking" is done for both mac address
and VLAN. For each VF, the HW ensures that the source MAC address
(or VLAN) of every outgoing packet exists in the MAC-list (or
VLAN-list) configured for RX filtering for that VF. If not,
the packet is dropped.
Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Yufeng Mo [Tue, 8 Oct 2019 01:20:04 +0000 (09:20 +0800)]
net: hns3: add support for setting VF link status on the host
This patch adds support to configure VF link properties.
The options are auto, enable, and disable. Even if the PF
is down, the communication between VFs will be normal
if the VFs are set to enable. The commands are as follows:
'ip link set <pf> vf <vf_id> state <auto|enable|disable>'
change the VF status
'ip link show'
show the setting status
Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Fixes: 25be6dea04db ("net: introduce name_node struct to be used in hashlist") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Colin Ian King [Mon, 7 Oct 2019 11:52:39 +0000 (12:52 +0100)]
nfp: bpf: make array exp_mask static, makes object smaller
Don't populate the array exp_mask on the stack but instead make it
static. Makes the object code smaller by 224 bytes.
Before:
text data bss dec hex filename
77832 2290 0 80122 138fa ethernet/netronome/nfp/bpf/jit.o
After:
text data bss dec hex filename
77544 2354 0 79898 1381a ethernet/netronome/nfp/bpf/jit.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Vladimir Oltean [Thu, 5 Sep 2019 01:01:12 +0000 (04:01 +0300)]
spi: Add a PTP system timestamp to the transfer structure
SPI is one of the interfaces used to access devices which have a POSIX
clock driver (real time clocks, 1588 timers etc). The fact that the SPI
bus is slow is not what the main problem is, but rather the fact that
drivers don't take a constant amount of time in transferring data over
SPI. When there is a high delay in the readout of time, there will be
uncertainty in the value that has been read out of the peripheral.
When that delay is constant, the uncertainty can at least be
approximated with a certain accuracy which is fine more often than not.
Timing jitter occurs all over in the kernel code, and is mainly caused
by having to let go of the CPU for various reasons such as preemption,
servicing interrupts, going to sleep, etc. Another major reason is CPU
dynamic frequency scaling.
It turns out that the problem of retrieving time from a SPI peripheral
with high accuracy can be solved by the use of "PTP system
timestamping" - a mechanism to correlate the time when the device has
snapshotted its internal time counter with the Linux system time at that
same moment. This is sufficient for having a precise time measurement -
it is not necessary for the whole SPI transfer to be transmitted "as
fast as possible", or "as low-jitter as possible". The system has to be
low-jitter for a very short amount of time to be effective.
This patch introduces a PTP system timestamping mechanism in struct
spi_transfer. This is to be used by SPI device drivers when they need to
know the exact time at which the underlying device's time was
snapshotted. More often than not, SPI peripherals have a very exact
timing for when their SPI-to-interconnect bridge issues a transaction
for snapshotting and reading the time register, and that will be
dependent on when the SPI-to-interconnect bridge figures out that this
is what it should do, aka as soon as it sees byte N of the SPI transfer.
Since spi_device drivers are the ones who'd know best how the peripheral
behaves in this regard, expose a mechanism in spi_transfer which allows
them to specify which word (or word range) from the transfer should be
timestamped.
Add a default implementation of the PTP system timestamping in the SPI
core. This is not going to be satisfactory performance-wise, but should
at least increase the likelihood that SPI device drivers will use PTP
system timestamping in the future.
There are 3 entry points from the core towards the SPI controller
drivers:
- transfer_one: The driver is passed individual spi_transfers to
execute. This is the easiest to timestamp.
- transfer_one_message: The core passes the driver an entire spi_message
(a potential batch of spi_transfers). The core puts the same pre and
post timestamp to all transfers within a message. This is not ideal,
but nothing better can be done by default anyway, since the core has
no insight into how the driver batches the transfers.
- transfer: Like transfer_one_message, but for unqueued drivers (i.e.
the driver implements its own queue scheduling).
David S. Miller [Mon, 7 Oct 2019 14:08:09 +0000 (10:08 -0400)]
Merge branch 'dpaa2-eth-misc-cleanup'
Ioana Ciornei says:
====================
dpaa2-eth: misc cleanup
This patch set consists of some cleanup patches ranging from removing dead
code to fixing a minor issue in ethtool stats. Also, unbounded while loops
are removed from the driver by adding a maximum number of retries for DPIO
portal commands.
Changes in v2:
- return -ETIMEDOUT where possible if the number of retries is hit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Mon, 7 Oct 2019 11:38:28 +0000 (14:38 +0300)]
dpaa2-eth: Avoid unbounded while loops
Throughout the driver there are several places where we wait
indefinitely for DPIO portal commands to be executed, while
the portal returns a busy response code.
Even though in theory we are guaranteed the portals become
available eventually, in practice the QBMan hardware module
may become unresponsive in various corner cases.
Make sure we can never get stuck in an infinite while loop
by adding a retry counter for all portal commands.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Radulescu [Mon, 7 Oct 2019 11:38:26 +0000 (14:38 +0300)]
dpaa2-eth: Cleanup dead code
Remove one function call whose result was not used anywhere.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 7 Oct 2019 04:09:32 +0000 (21:09 -0700)]
net/tls: store decrypted on a single bit
Use a single bit instead of boolean to remember if packet
was already decrypted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 7 Oct 2019 04:09:31 +0000 (21:09 -0700)]
net/tls: store async_capable on a single bit
Store async_capable on a single bit instead of a full integer
to save space.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 7 Oct 2019 04:09:30 +0000 (21:09 -0700)]
net/tls: pass context to tls_device_decrypted()
Avoid unnecessary pointer chasing and calculations, callers already
have most of the state tls_device_decrypted() needs.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 7 Oct 2019 04:09:29 +0000 (21:09 -0700)]
net/tls: make allocation failure unlikely
Make sure GCC realizes it's unlikely that allocations will fail.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 7 Oct 2019 04:09:28 +0000 (21:09 -0700)]
net/tls: mark sk->err being set as unlikely
Tell GCC sk->err is not likely to be set.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 7 Oct 2019 04:09:27 +0000 (21:09 -0700)]
net: sockmap: use bitmap for copy info
Don't use bool array in struct sk_msg_sg, save 12 bytes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 7 Oct 2019 13:30:03 +0000 (09:30 -0400)]
Merge branch 'ena-set_channels'
Sameeh Jubran says:
====================
ena: Support ethtool set_channels
Difference from v2:
* ethtool's set/get channels: Switched to using combined instead of
separate rx/tx
* Fixed error handling in set_channels
* Fixed indentation and cosmetic issues as requested by Jakub Kicinski
Difference from v1:
* Dropped the print from patch 0002 - "net: ena: multiple queue creation
related cleanups" as requested by David Miller
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sameeh Jubran [Sun, 6 Oct 2019 12:33:28 +0000 (15:33 +0300)]
net: ena: ethtool: support set_channels callback
Set channels callback enables the user to change the count of queues
used by the driver using ethtool. We decided to currently support only
equal number of rx and tx queues, this might change in the future.
Also rename dev_up to dev_was_up in ena_update_queue_count() to make
it clearer.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sameeh Jubran [Sun, 6 Oct 2019 12:33:26 +0000 (15:33 +0300)]
net: ena: make ethtool -l show correct max number of queues
- Update ena_ethtool:ena_get_channels() to return adapter->max_io_queues
so that ethtool -l returns the correct maximum queue number.
- Change the name of ena_calc_io_queue_num() to
ena_calc_max_io_queue_num() as it returns the maximum number of io
queues and actual number of queues can be smaller if changed
by ethtool -L which is implemented in a later commit.
- Change variable name from io_queue_num to max_num_io_queues in
ena_calc_max_io_queue_num() and ena_probe().
- Make all types of variables that convey the number and sizeof queues
to be u32, for consistency with the API between the driver and the
device.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sameeh Jubran [Sun, 6 Oct 2019 12:33:24 +0000 (15:33 +0300)]
net: ena: multiple queue creation related cleanups
- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity
and consistency
- Remove redundant number of io queues parameter in functions
ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts(),
which already get adapter parameter, so use adapter->num_io_queues
in the function instead.
- Use the local variable ena_dev instead of ctx->ena_dev in
ena_calc_io_queue_size
- Fix multi row comment alignments
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sameeh Jubran [Sun, 6 Oct 2019 12:33:23 +0000 (15:33 +0300)]
net: ena: change num_queues to num_io_queues for clarity and consistency
Most places in the code refer to the IO queues as io_queues and not
simply queues. Examples - max_io_queues_per_vf, ENA_MAX_NUM_IO_QUEUES,
ena_destroy_all_io_queues() etc..
We are also adding the new max_num_io_queues field to struct ena_adapter
in the following commit.
The changes included in this commit are:
struct ena_adapter->num_queues => struct ena_adapter->num_io_queues
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel T. Lee [Sat, 5 Oct 2019 08:25:08 +0000 (17:25 +0900)]
samples: pktgen: add helper functions for IP(v4/v6) CIDR parsing
This commit adds CIDR parsing and IP validate helper function to parse
single IP or range of IP with CIDR. (e.g. 198.18.0.0/15)
Validating the address should be preceded prior to the parsing.
Helpers will be used in prior to set target address in samples/pktgen.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel T. Lee [Sat, 5 Oct 2019 08:25:07 +0000 (17:25 +0900)]
samples: pktgen: fix proc_cmd command result check logic
Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread',
'pg_set'. proc_cmd is designed to check command result with grep the
"Result:", but this might fail since this string is only shown in
'pg_thread' and 'pg_set'.
This commit fixes this logic by grep-ing the "Result:" string only when
the command is not for 'pg_ctrl'.
For clarity of an execution flow, 'errexit' flag has been set.
To cleanup pktgen on exit, trap has been added for EXIT signal.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel T. Lee [Sat, 5 Oct 2019 08:25:06 +0000 (17:25 +0900)]
samples: pktgen: make variable consistent with option
This commit changes variable names that can cause confusion.
For example, variable DST_MIN is quite confusing since the
keyword 'udp_dst_min' and keyword 'dst_min' is used with pg_ctrl.
On the following commit, 'dst_min' will be used to set destination IP,
and the existing variable name DST_MIN should be changed.
Variable names are matched to the exact keyword used with pg_ctrl.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Mon, 7 Oct 2019 07:28:31 +0000 (09:28 +0200)]
net: devlink: fix reporter dump dumpit
In order for attrs to be prepared for reporter dump dumpit callback,
set GENL_DONT_VALIDATE_DUMP_STRICT instead of GENL_DONT_VALIDATE_DUMP.
Fixes: 26e95a480773 ("devlink: have genetlink code to parse the attrs during dumpit" Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Sun, 6 Oct 2019 11:17:13 +0000 (13:17 +0200)]
net: stmmac: selftests: Add tests for VLAN Perfect Filtering
Add two new tests for VLAN Perfect Filtering. While at it, increase a
little bit the tests strings lenght so that we can have more descriptive
test names.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Sun, 6 Oct 2019 11:17:12 +0000 (13:17 +0200)]
net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available
If VLAN Hash Filtering is not available we can fallback to perfect
filtering instead. Let's implement this in XGMAC and GMAC cores and let
the user use this filter.
VLAN VID=0 always passes filter so we check if more than 2 VLANs are
created and return proper error code if so because perfect filtering
only supports 1 VID at a time.
Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Sun, 6 Oct 2019 07:08:32 +0000 (15:08 +0800)]
net/rds: Add missing include file
Fix build error:
net/rds/ib_cm.c: In function rds_dma_hdrs_alloc:
net/rds/ib_cm.c:475:13: error: implicit declaration of function dma_pool_zalloc; did you mean mempool_alloc? [-Werror=implicit-function-declaration]
hdrs[i] = dma_pool_zalloc(pool, GFP_KERNEL, &hdr_daddrs[i]);
^~~~~~~~~~~~~~~
mempool_alloc
net/rds/ib.c: In function rds_ib_dev_free:
net/rds/ib.c:111:3: error: implicit declaration of function dma_pool_destroy; did you mean mempool_destroy? [-Werror=implicit-function-declaration]
dma_pool_destroy(rds_ibdev->rid_hdrs_pool);
^~~~~~~~~~~~~~~~
mempool_destroy
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 6a439997002a ("net/rds: Use DMA memory pool allocation for rds_header") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
mlxsw: Query number of modules from firmware
Vadim says:
The patchset adds support for a new field "num_of_modules" of Management
General Peripheral Information Register (MGPIR), providing the maximum
number of QSFP modules, which can be supported by the system.
It allows to obtain the number of QSFP modules directly from this field,
as a static data, instead of old method of getting this info through
"network port to QSFP module" mapping. With the old method, in case of
port dynamic re-configuration some modules can logically "disappear" as
a result of port split operations, which can cause some modules to
appear missing.
Such scenario can happen on a system equipped with a BMC card, while PCI
chip driver at host CPU side can perform some ports "split" or "unsplit"
operations, while BMC side I2C chip driver reads the "port-to-module"
mapping.
Add common API for FW "minor" and "subminor" versions validation and
share it between PCI and I2C based drivers.
Add FW version validation for "minimal" driver, because use of new field
"num_of_modules" in MGPIR register is not backward compatible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Sun, 6 Oct 2019 06:34:52 +0000 (09:34 +0300)]
mlxsw: minimal: Add validation for FW version
Add validation for FW version in order to prevent driver initialization
in case FW version is older than expected. FW version validation is
necessary, because use of a new field 'num_of_modules' in MGPIR register
is not backward compatible. FW 'minor' and 'subminor' versions are
expected to be greater than or equal to 2000 and 1886, respectively.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Sun, 6 Oct 2019 06:34:50 +0000 (09:34 +0300)]
mlxsw: thermal: Provide optimization for QSFP modules number detection
Use new field "num_of_modules" of MGPIR register for "thermal" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Sun, 6 Oct 2019 06:34:49 +0000 (09:34 +0300)]
mlxsw: hwmon: Provide optimization for QSFP modules number detection
Use new field "num_of_modules" of MGPIR register for "hwmon" interface
in order to get the number of modules supported by system directly from
the system configuration, instead of getting it from port to module
mapping info.
Reading this info through MGPIR register is faster and does not depend
on possible dynamic re-configuration of ports.
In case of port dynamic re-configuration some modules can logically
"disappear" as a result of port split and un-spilt operations, which
can cause missing of some modules, in case this info is taken from port
to module mapping info.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Sun, 6 Oct 2019 06:34:48 +0000 (09:34 +0300)]
mlxsw: reg: Extend MGPIR register with new field exposing the number of QSFP modules
Extend MGPIR - Management General Peripheral Information Register
with new field "num_of_modules" exposing the number of modules
supported by specific system.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: genetlink: parse attrs for dumpit() callback
In generic netlink, parsing attributes for doit() callback is already
implemented. They are available in info->attrs.
For dumpit() however, each user which is interested in attributes have to
parse it manually. Even though the attributes may be (depending on flag)
already validated (by parse function).
Make usage of attributes in dumpit() more convenient and prepare
info->attrs too.
Patchset also make the existing users of genl_family_attrbuf() converted
to use info->attrs and removes the helper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 5 Oct 2019 18:04:36 +0000 (20:04 +0200)]
net: genetlink: parse attrs and store in contect info struct during dumpit
Extend the dumpit info struct for attrs. Instead of existing attribute
validation do parse them and save in the info struct. Caller can benefit
from this and does not have to do parse itself. In order to properly
free attrs, genl_family pointer needs to be added to dumpit info struct
as well.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 5 Oct 2019 18:04:35 +0000 (20:04 +0200)]
net: genetlink: push attrbuf allocation and parsing to a separate function
To be re-usable by dumpit as well, push the code that is taking care of
attrbuf allocation and parting from doit into separate function.
Introduce a helper to free the buffer too.
Check family->maxattr too before calling kfree() to be symmetrical with
the allocation check.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 5 Oct 2019 18:04:34 +0000 (20:04 +0200)]
net: genetlink: introduce dump info struct to be available during dumpit op
Currently the cb->data is taken by ops during non-parallel dumping.
Introduce a new structure genl_dumpit_info and store the ops there.
Distribute the info to both non-parallel and parallel dumping. Also add
a helper genl_dumpit_info() to easily get the info structure in the
dumpit callback from cb.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 5 Oct 2019 18:04:33 +0000 (20:04 +0200)]
net: genetlink: push doit/dumpit code from genl_family_rcv_msg
Currently the function genl_family_rcv_msg() is quite big. Since it is
quite convenient, push code that is related to doit and dumpit ops into
separate functions.
Do small changes on the way, like rc/err unification, NULL check etc.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yi-Hung Wei [Fri, 4 Oct 2019 16:26:44 +0000 (09:26 -0700)]
openvswitch: Allow attaching helper in later commit
This patch allows to attach conntrack helper to a confirmed conntrack
entry. Currently, we can only attach alg helper to a conntrack entry
when it is in the unconfirmed state. This patch enables an use case
that we can firstly commit a conntrack entry after it passed some
initial conditions. After that the processing pipeline will further
check a couple of packets to determine if the connection belongs to
a particular application, and attach alg helper to the connection
in a later stage.
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
create netdevsim instances in namespace
Allow user to create netdevsim devlink and netdevice instances in a
network namespace according to the namespace where the user resides in.
Add a selftest to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 5 Oct 2019 06:10:33 +0000 (08:10 +0200)]
selftests: test creating netdevsim inside network namespace
Add a test that creates netdevsim instance inside network namespace
and verifies that the related devlink instance and port netdevices
reside in the namespace.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Sat, 5 Oct 2019 06:10:32 +0000 (08:10 +0200)]
netdevsim: create devlink and netdev instances in namespace
When user does create new netdevsim instance using sysfs bus file,
create the devlink instance and related netdev instance in the namespace
of the caller.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net/tls: add ctrl path tracing and statistics
This set adds trace events related to TLS offload and basic MIB stats
for TLS.
First patch contains the TLS offload related trace points. Those are
helpful in troubleshooting offload issues, especially around the
resync paths.
Second patch adds a tracepoint to the fastpath of device offload,
it's separated out in case there will be objections to adding
fast path tracepoints. Again, it's quite useful for debugging
offload issues.
Next four patches add MIB statistics. The statistics are implemented
as per-cpu per-netns counters. Since there are currently no fast path
statistics we could move to atomic variables. Per-CPU seem more common.
Most basic statistics are number of created and live sessions, broken
out to offloaded and non-offloaded. Users seem to like those a lot.
Next there is a statistic for decryption errors. These are primarily
useful for device offload debug, in normal deployments decryption
errors should not be common.
Last but not least a counter for device RX resync.
====================
Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 4 Oct 2019 23:19:26 +0000 (16:19 -0700)]
net/tls: add TlsDecryptError stat
Add a statistic for TLS record decryption errors.
Since devices are supposed to pass records as-is when they
encounter errors this statistic will count bad records in
both pure software and inline crypto configurations.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 4 Oct 2019 23:19:25 +0000 (16:19 -0700)]
net/tls: add statistics for installed sessions
Add SNMP stats for number of sockets with successfully
installed sessions. Break them down to software and
hardware ones. Note that if hardware offload fails
stack uses software implementation, and counts the
session appropriately.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 4 Oct 2019 23:19:23 +0000 (16:19 -0700)]
net/tls: add device decrypted trace point
Add a tracepoint to the TLS offload's fast path. This tracepoint
can be used to track the decrypted and encrypted status of received
records. Records decrypted by the device should have decrypted set
to 1, records which have neither decrypted nor decrypted set are
partially decrypted, require re-encryption and therefore are most
expensive to deal with.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / kernel.git / log