Marek Vasut [Tue, 28 Jun 2022 00:34:07 +0000 (02:34 +0200)]
drm/doc: Fix comment typo
Replace apprpriately with appropriately.
Fixes: 66b593b02c1a5 ("drm/doc: Polish plane composition property docs") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sean Paul <seanpaul@chromium.org> Cc: Simon Ser <contact@emersion.fr> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220628003407.77765-1-marex@denx.de
Yannick Fertre [Fri, 3 Jun 2022 13:46:54 +0000 (15:46 +0200)]
drm/stm: ltdc: update hardware error management
The latest hardware version (0x40100) supports a hardware threshold
register (aka FUTR) to trigger a fifo underrun interrupt.
A software threshold has been implemented for other hardware versions.
The threshold is set to 128 by default.
José Expósito [Mon, 20 Jun 2022 16:06:40 +0000 (18:06 +0200)]
drm/doc: Add KUnit documentation
Explain how to run the KUnit tests present in the DRM subsystem and
clarify why the UML-only options were not added to the configuration
file present in drivers/gpu/drm/.kunitconfig [1] [2].
José Expósito [Mon, 20 Jun 2022 16:06:39 +0000 (18:06 +0200)]
drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_rgb332()
Test the conversion from XRGB8888 to RGB332.
What is tested?
- Different values for the X in XRGB8888 to make sure it is ignored
- Different clip values: Single pixel and full and partial buffer
- Well known colors: White, black, red, green, blue, magenta, yellow
and cyan
- Other colors: Randomly picked
- Destination pitch
How to run the tests?
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
drm/simple-kms: Use drm_atomic_helper_check_crtc_state()
Simple-KMS helpers guarantee that the CRTC and plane enable
flags are synchronized. Implement this with atomic helpers
drm_atomic_helper_check_crtc_state() on the CRTC side, and
drm_atomic_helper_check_plane_state() on the plane side.
Add drm_atomic_helper_check_crtc_state(), which contains tests common
to many CRTCs. The first added test verifies that an enabled CRTC has
at least one enabled primary plane.
Clip memory range to screen-buffer size to avoid out-of-bounds access
in fbdev deferred I/O's damage handling.
Fbdev's deferred I/O can only track pages. From the range of pages, the
damage handler computes the clipping rectangle for the display update.
If the fbdev screen buffer ends near the beginning of a page, that page
could contain more scanlines. The damage handler would then track these
non-existing scanlines as dirty and provoke an out-of-bounds access
during the screen update. Hence, clip the maximum memory range to the
size of the screen buffer.
While at it, rename the variables min/max to min_off/max_off in
drm_fb_helper_deferred_io(). This avoids confusion with the macros of
the same name.
Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Fixes: 0252090bb2a7 ("drm/fb-helper: Calculate damaged area in separate helper") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: <stable@vger.kernel.org> # v5.18+ Link: https://patchwork.freedesktop.org/patch/msgid/20220621104617.8817-1-tzimmermann@suse.de
Alex Williamson [Wed, 22 Jun 2022 14:01:34 +0000 (16:01 +0200)]
vfio/pci: Remove console drivers
Console drivers can create conflicts with PCI resources resulting in
userspace getting mmap failures to memory BARs. This is especially
evident when trying to re-use the system primary console for userspace
drivers. Use the aperture helpers to remove these conflicts.
Implement DRM's aperture helpers under video/ for sharing with other
sub-systems. Remove DRM-isms from the interface. The helpers track
the ownership of framebuffer apertures and provide hand-over from
firmware, such as EFI and VESA, to native graphics drivers.
Other subsystems, such as fbdev and vfio, also have to maintain ownership
of framebuffer apertures. Moving DRM's aperture helpers to a more public
location allows all subsystems to interact with each other and share a
common implementation.
The aperture helpers are selected by the various firmware drivers within
DRM and fbdev, and the VGA text-console driver.
The original DRM interface is kept in place for use by DRM drivers.
v3:
* prefix all interfaces with aperture_ (Javier)
* rework and simplify documentation (Javier)
* rename struct dev_aperture to struct aperture_range
* rebase onto latest DRM
* update MAINTAINERS entry
There will be more DRM drivers for firmware-provided framebuffers. Use
the existing entry for simpledrm instead of adding a new one for each
driver. Also add DRM's aperture helpers, which are part of the driver's
infrastructure.
Jocelyn Falempe [Wed, 22 Jun 2022 12:48:15 +0000 (14:48 +0200)]
drm/ast: Fix black screen when getting out of suspend
With an AST2600, the screen is garbage when going out of suspend.
This is because color settings are lost, and not restored on resume.
Force the color settings on DPMS_ON, to make sure the settings are correct.
I didn't write this code, it comes from the out-of-tree aspeed driver v1.13
https://www.aspeedtech.com/support_driver/
Miaoqian Lin [Wed, 25 May 2022 11:54:11 +0000 (15:54 +0400)]
drm/mcde: Fix refcount leak in mcde_dsi_bind
Every iteration of for_each_available_child_of_node() decrements
the reference counter of the previous node. There is no decrement
when break out from the loop and results in refcount leak.
Add missing of_node_put() to fix this.
Joel Selvaraj [Wed, 1 Jun 2022 08:24:10 +0000 (13:54 +0530)]
drm/panel: introduce ebbg,ft8719 panel
Add DRM panel driver for EBBG FT8719 6.18" 2246x1080 DSI video mode
panel, which can be found on some Xiaomi Poco F1 phones. The panel's
backlight is managed through QCOM WLED driver.
A helper macro that can be used to simplify sending DCS commands.
It is useful in scenarios like panel initialization which can sometimes
involve sending lot of DCS commands.
Joel Selvaraj [Wed, 1 Jun 2022 08:24:08 +0000 (13:54 +0530)]
dt-bindings: display: Add bindings for EBBG FT8719
Add bindings for the EBBG FT8719 6.18" 2246x1080 DSI video mode panel,
which can be found on some Xiaomi Poco F1 phones. The backlight is
managed through the QCOM WLED driver.
Jiasheng Jiang [Thu, 2 Jun 2022 10:34:01 +0000 (18:34 +0800)]
drm: bridge: adv7511: Add check for mipi_dsi_driver_register
As mipi_dsi_driver_register could return error if fails,
it should be better to check the return value and return error
if fails.
Moreover, if i2c_add_driver fails, mipi_dsi_driver_register
should be reverted.
Stephen Kitt [Tue, 7 Jun 2022 18:10:22 +0000 (20:10 +0200)]
drm/bridge: parade-ps8622: Use backlight helper
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220607181022.1119546-1-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:08:21 +0000 (19:08 +0200)]
drm: shmobile: Use backlight helper
This started with work on the removal of backlight_properties'
deprecated fb_blank field, much of which can be taken care of by using
helper functions provided by backlight.h instead of directly accessing
fields in backlight_properties. This patch series doesn't involve
fb_blank, but it still seems useful to use helper functions where
appropriate.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220616170821.1348169-1-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:23:13 +0000 (19:23 +0200)]
drm/panel: panel-asus-z00t-tm5p5-n35596: Use backlight helper
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220616172316.1355133-2-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:23:14 +0000 (19:23 +0200)]
drm/panel: panel-dsi-cm: Use backlight helpers
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of setting the power state by manually updating fields in
struct backlight_properties, use backlight_enable() and
backlight_disable(). These also call backlight_update_status() so the
separate call is no longer needed.
Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220616172316.1355133-3-steve@sk2.org
Stephen Kitt [Thu, 16 Jun 2022 17:23:15 +0000 (19:23 +0200)]
drm/panel: sony-acx565akm: Use backlight helpers
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Instead of manually checking the power state in struct
backlight_properties, use backlight_is_blank().
While we're at it, drop .fb_blank from the initialisation function; it
is deprecated, and this helps make progress towards enabling its
removal. This change makes no functional difference since
FB_BLANK_UNBLANK is the default value.
Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220616172316.1355133-4-steve@sk2.org
Alexander Stein [Tue, 21 Jun 2022 07:21:18 +0000 (09:21 +0200)]
drm/panel: panel-simple: Add dev_err_probe if backlight could not be found
If the backlight node is not enabled, this (silently) returns with
-EPROBE_DEFER. /sys/kernel/debug/devices_deferred also shows nothing
helpful:
$ cat /sys/kernel/debug/devices_deferred
display
With this patch, there is a helpful hint:
$ cat /sys/kernel/debug/devices_deferred
display panel-simple: Could not find backlight
Jiang Jian [Tue, 21 Jun 2022 13:31:07 +0000 (21:31 +0800)]
drm/pl111: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/pl111/pl111_display.c
line: 251
* Note that the the ARM hardware's format reader takes 'r' from
changed to
* Note that the the ARM hardware's format reader takes 'r' from
Jiang Jian [Tue, 21 Jun 2022 14:01:51 +0000 (22:01 +0800)]
drm/panel: nt35510: Remove duplicate 'the' in two places.
file: ./drivers/gpu/drm/panel/panel-novatek-nt35510.c
line: 193,214,253
* amplification for the the step-up circuit:
changed to
* amplification for the step-up circuit:
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.22.394.2206121300120.3447@hadrien
Yang Li [Mon, 13 Jun 2022 01:26:58 +0000 (09:26 +0800)]
drm: Remove unnecessary print function dev_err()
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warning:
./drivers/gpu/drm/logicvc/logicvc_drm.c:352:2-9: line 352 is redundant
because platform_get_irq() already prints an error
Dan Carpenter [Tue, 14 Jun 2022 12:08:53 +0000 (15:08 +0300)]
drm: logicvc: fix error code in logicvc_layer_init()
Return -EINVAL if logicvc_layer_formats_lookup() fails. Don't return
success.
Fixes: 03b72aa1419a ("drm: Add support for the LogiCVC display controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yqh6VdNiDvJYMOQ+@kili
Dan Carpenter [Tue, 14 Jun 2022 12:08:25 +0000 (15:08 +0300)]
drm: logicvc: Fix uninitialized variable in probe
The "regmap" is supposed to be initialized to NULL but it's used
without being initialized.
Fixes: 03b72aa1419a ("drm: Add support for the LogiCVC display controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yqh6OfSiPFuVrGo4@kili
drm/hyperv-drm: Include framebuffer and EDID headers
Fix a number of compile errors by including the correct header
files. Examples are shown below.
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_blit_to_vram_rect':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:25:48: error: invalid use of undefined type 'struct drm_framebuffer'
25 | struct hyperv_drm_device *hv = to_hv(fb->dev);
| ^~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c: In function 'hyperv_connector_get_modes':
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:59:17: error: implicit declaration of function 'drm_add_modes_noedid' [-Werror=implicit-function-declaration]
59 | count = drm_add_modes_noedid(connector,
| ^~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/hyperv/hyperv_drm_modeset.c:62:9: error: implicit declaration of function 'drm_set_preferred_mode'; did you mean 'drm_mm_reserve_node'? [-Werror=implicit-function-declaration]
62 | drm_set_preferred_mode(connector, hv->preferred_width,
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: aebd89482ab4 ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Fixes: 6f5734c32c2c ("drm: Drop drm_framebuffer.h from drm_crtc.h") Fixes: b6a276d7208a ("drm: Drop drm_edid.h from drm_crtc.h") Cc: Deepak Rawat <drawat.floss@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: linux-hyperv@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.14+ Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220622083413.12573-1-tzimmermann@suse.de
Jiang Jian [Tue, 21 Jun 2022 13:51:40 +0000 (21:51 +0800)]
GPU: drm: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/drm_ioctl.c
line: 86
* means the the unique name for the master node just opening is _not_ filled
changed to
* means the unique name for the master node just opening is _not_ filled
Jiang Jian [Tue, 21 Jun 2022 13:44:01 +0000 (21:44 +0800)]
drm: panel-orientation-quirks: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/drm_panel_orientation_quirks.c
line: 196
* GPD Pocket, note that the the DMI data is less generic then
changed to
* GPD Pocket, note that the DMI data is less generic then
Jiang Jian [Tue, 21 Jun 2022 13:05:50 +0000 (21:05 +0800)]
drm/vc4: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/vc4/vc4_regs.h
line: 267
/* Set when the the downstream tries to read from the display FIFO
changed to
/* Set when the downstream tries to read from the display FIFO
Jiang Jian [Tue, 21 Jun 2022 13:02:10 +0000 (21:02 +0800)]
drm/prime: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/drm_prime.c
line: 842
* of the the buffer described by the provided sg_table.
changed to
* of the buffer described by the provided sg_table.
Jiang Jian [Tue, 21 Jun 2022 13:39:20 +0000 (21:39 +0800)]
drm/nouveau/mmu: drop unexpected word "the" in the comments
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
line: 1051
* have the the deepest nesting of page tables.
changed to
* have the deepest nesting of page tables.
Lyude Paul [Thu, 2 Jun 2022 20:17:55 +0000 (16:17 -0400)]
drm/display/dp_mst: Don't validate port refs in drm_dp_check_and_send_link_address()
Drive-by cleanup, we don't need to validate the port references here as we
already previously went through the effort of refactoring things such that
we're guaranteed to be able to access ->mstb and ->port safely from
drm_dp_check_and_send_link_address(), since the only two places in the
codebase that drop an MST reference in such a way that it would remove it
from the topology are both protected under probe_lock.
Jiang Jian [Tue, 21 Jun 2022 19:00:55 +0000 (03:00 +0800)]
drm/display: Remove duplicate 'the' in two places.
there is an unexpected word "the" in the comments that need to be dropped
file: drivers/gpu/drm/display/drm_dp_helper.c
line: 1600
* Doesn't account the the "MOT" bit, and instead assumes each
changed to
* Doesn't account the "MOT" bit, and instead assumes eac
Douglas Anderson [Tue, 14 Jun 2022 21:54:18 +0000 (14:54 -0700)]
drm/bridge: parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux
This implements the callback added by the patch ("drm/dp: Add
wait_hpd_asserted() callback to struct drm_dp_aux").
With this change and all the two "DP AUX Endpoint" drivers changed to
use wait_hpd_asserted(), we no longer need to have an long delay in
the AUX transfer function. It's up to the panel code to make sure that
the panel is powered now. If someone tried to call the aux transfer
function without making sure the panel is powered we'll just get a
normal transfer failure.
We'll still keep the wait for HPD in the pre_enable() function. Though
it's probably not actually needed there, this driver is used in the
old mode (pre-DP AUX Endpoints) and it may be important for those
cases. If nothing else, it shouldn't cause any big problems.
NOTE: When handling the timeout for HPD we start the timer _after_
we've runtime resumed the device. This is definitely important for the
panel on my homestar which comes up 170 ms after we start timing (the
panel specifies 200 ms max). It's a little unclear how much of this
extra time is due to some internal state machine in the parade
firmware vs. debouncing but it seems to work for the two test cases I
have to do it this way.
Douglas Anderson [Tue, 14 Jun 2022 21:54:17 +0000 (14:54 -0700)]
drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux
Let's add support for being able to read the HPD pin even if it's
hooked directly to the controller. This will let us take away the
waiting in the AUX transfer functions of the eDP controller drivers.
Douglas Anderson [Tue, 14 Jun 2022 21:54:16 +0000 (14:54 -0700)]
drm/panel-edp: Take advantage of wait_hpd_asserted() in struct drm_dp_aux
Let's add support for being able to read the HPD pin even if it's
hooked directly to the controller. This will allow us to get more
accurate delays also lets us take away the waiting in the AUX transfer
functions of the eDP controller drivers.
Douglas Anderson [Tue, 14 Jun 2022 21:54:15 +0000 (14:54 -0700)]
drm/dp: Add wait_hpd_asserted() callback to struct drm_dp_aux
Sometimes it's useful for users of the DP AUX bus (like panels) to be
able to poll HPD. Let's add a callback that allows DP AUX busses
drivers to provide this.
Hsin-Yi Wang [Thu, 9 Jun 2022 07:27:23 +0000 (15:27 +0800)]
drm: Config orientation property if panel provides it
Panel orientation property should be set before drm_dev_register().
Some drm driver calls drm_dev_register() in .bind(). However, most
panels sets orientation property relatively late, mostly in .get_modes()
callback, since this is when they are able to get the connector and
binds the orientation property to it, though the value should be known
when the panel is probed.
In drm_bridge_connector_init(), if a bridge is a panel bridge, use it to
set the connector's panel orientation property.
Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-9-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-8-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-7-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation and double blank line] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-6-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-5-hsinyi@chromium.org
To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed space vs. tab indentation] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-4-hsinyi@chromium.org
Hsin-Yi Wang [Thu, 9 Jun 2022 07:27:15 +0000 (15:27 +0800)]
drm/panel: Add an API to allow drm to set orientation from panel
Panels usually call drm_connector_set_panel_orientation(), which is
later than drm/kms driver calling drm_dev_register(). This leads to a
WARN().
The orientation property is known earlier. For example, some panels
parse the property through device tree during probe.
Add an API to return the property from panel to drm/kms driver, so the
drivers are able to call drm_connector_set_orientation_from_panel() before
drm_dev_register().
Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: removed space before tab] Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220609072722.3488207-2-hsinyi@chromium.org
drm/aperture: Run fbdev removal before internal helpers
Always run fbdev removal first to remove simpledrm via
sysfb_disable(). This clears the internal state. The later call
to drm_aperture_detach_drivers() then does nothing. Otherwise,
with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Alex Deucher [Thu, 16 Jun 2022 20:35:38 +0000 (16:35 -0400)]
drm/amdgpu/display: drop set but unused variable
Fixes this warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9143:27: warning: variable 'abo' set but not used [-Wunused-but-set-variable]
Jiri Vanek [Wed, 15 Jun 2022 22:22:21 +0000 (00:22 +0200)]
drm/bridge/tc358775: Fix DSI clock division for vsync delay calculation
Use the same PCLK divide option (divide DSI clock to generate pixel clock)
which is set to LVDS Configuration Register (LVCFG) also for a VSync delay
calculation. Without this change an auxiliary variable could underflow
during the calculation for some dual-link LVDS panels and then calculated
VSync delay is wrong. This leads to a shifted picture on a panel.
Jiri Vanek [Wed, 15 Jun 2022 22:22:20 +0000 (00:22 +0200)]
drm/bridge/tc358775: Return before displaying inappropriate error message
Function for reading from i2c device register displays error message even
if reading ends correctly. Add return to avoid falling through into
the fail label.
Liu Ying [Sat, 11 Jun 2022 14:14:19 +0000 (22:14 +0800)]
drm/bridge: imx: Add LDB support for i.MX8qm
This patch adds a drm bridge driver for i.MX8qm LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 30bpp parallel input color format and can
map the input to VESA or JEIDA standards. The two channels can be used
simultaneously, either in dual mode or split mode. In dual mode, the
two channels output identical data. In split mode, channel0 outputs
odd pixels and channel1 outputs even pixels. This patch supports the
LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-13-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:18 +0000 (22:14 +0800)]
drm/bridge: imx: Add LDB support for i.MX8qxp
This patch adds a drm bridge driver for i.MX8qxp LVDS display bridge(LDB)
which is officially named as pixel mapper. The LDB has two channels.
Each of them supports up to 24bpp parallel input color format and can map
the input to VESA or JEIDA standards. The two channels cannot be used
simultaneously, that is to say, the user should pick one of them to use.
Two LDB channels from two LDB instances can work together in LDB split
mode to support a dual link LVDS display. The channel indexes have to be
different. Channel0 outputs odd pixels and channel1 outputs even pixels.
This patch supports the LDB single mode and split mode.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-12-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:16 +0000 (22:14 +0800)]
drm/bridge: imx: Add LDB driver helper support
This patch adds a helper to support LDB drm bridge drivers for
i.MX SoCs. Helper functions supported by this helper should
implement common logics for all LDB modules embedded in i.MX SoCs.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-10-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:15 +0000 (22:14 +0800)]
drm/bridge: imx: Add i.MX8qxp pixel link to DPI support
This patch adds a drm bridge driver for i.MX8qxp pixel link to display
pixel interface(PXL2DPI). The PXL2DPI interfaces the pixel link 36-bit
data output and the DSI controller’s MIPI-DPI 24-bit data input, and
inputs of LVDS Display Bridge(LDB) module used in LVDS mode, to remap
the pixel color codings between those modules. The PXL2DPI is purely
combinatorial.
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-9-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:13 +0000 (22:14 +0800)]
drm/bridge: imx: Add i.MX8qm/qxp display pixel link support
This patch adds a drm bridge driver for i.MX8qm/qxp display pixel link.
The pixel link forms a standard asynchronous linkage between
pixel sources(display controller or camera module) and pixel
consumers(imaging or displays). It consists of two distinct
functions, a pixel transfer function and a control interface.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-7-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:11 +0000 (22:14 +0800)]
drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
This patch adds a drm bridge driver for i.MX8qm/qxp pixel combiner.
The pixel combiner takes two output streams from a single display
controller and manipulates the two streams to support a number
of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured
as either one screen, two screens, or virtual screens. The pixel
combiner is also responsible for generating some of the control signals
for the pixel link output channel. For now, the driver only supports
the bypass mode.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Colibri iMX8X, LT170410-2WHC, LP156WF1 Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-5-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:09 +0000 (22:14 +0800)]
media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
This patch adds documentations for RGB666_1X30_CPADLO, RGB888_1X30_CPADLO,
RGB666_1X36_CPADLO and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp
pixel combiner. The RGB pixels with padding low per component are
transmitted on a 30-bit input bus(10-bit per component) from a display
controller or a 36-bit output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-3-victor.liu@nxp.com
Liu Ying [Sat, 11 Jun 2022 14:14:08 +0000 (22:14 +0800)]
media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
This patch adds RGB666_1X30_CPADLO, RGB888_1X30_CPADLO, RGB666_1X36_CPADLO
and RGB888_1X36_CPADLO bus formats used by i.MX8qm/qxp pixel combiner.
The RGB pixels with padding low per component are transmitted on a 30-bit
input bus(10-bit per component) from a display controller or a 36-bit
output bus(12-bit per component) to a pixel link.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220611141421.718743-2-victor.liu@nxp.com
Helge Deller [Thu, 2 Jun 2022 20:06:28 +0000 (22:06 +0200)]
fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.
To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.
Helge Deller [Thu, 2 Jun 2022 20:08:38 +0000 (22:08 +0200)]
fbcon: Fix accelerated fbdev scrolling while logo is still shown
There is no need to directly skip over to the SCROLL_REDRAW case while
the logo is still shown.
When using DRM, this change has no effect because the code will reach
the SCROLL_REDRAW case immediately anyway.
But if you run an accelerated fbdev driver and have
FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION enabled, console scrolling is
slowed down by factors so that it feels as if you use a 9600 baud
terminal.
So, drop those unnecessary checks and speed up fbdev console
acceleration during bootup.
projects / kernel.git / log