Samuel Holland [Sun, 24 Apr 2022 16:26:30 +0000 (11:26 -0500)]
drm/sun4i: Add support for D1 TCON TOP
D1 has a TCON TOP with TCON TV0 and DSI, but no TCON TV1. This puts the
DSI clock name at index 1 in clock-output-names. Support this by only
incrementing the index for clocks that are actually supported.
Samuel Holland [Sun, 24 Apr 2022 16:26:29 +0000 (11:26 -0500)]
drm/sun4i: Add support for D1 mixers
D1 has a display engine with the usual pair of mixers, albeit with
relatively few layers. In fact, D1 appears to be the first SoC to have
a mixer without any UI layers. Add support for these new variants.
Samuel Holland [Sun, 24 Apr 2022 16:26:28 +0000 (11:26 -0500)]
drm/sun4i: csc: Add support for the new MMIO layout
D1 changes the MMIO offsets for the CSC blocks in the first mixer. The
mixers' ccsc property is used as an index into the ccsc_base array. Use
an enumeration to describe this index, and add the new set of offsets.
Samuel Holland [Sun, 24 Apr 2022 16:26:27 +0000 (11:26 -0500)]
drm/sun4i: Allow VI layers to be primary planes
D1's mixer 1 has no UI layers, only a single VI layer. That means the
mixer can only be used if the primary plane comes from this VI layer.
Add the code to handle this case.
Newly introduced mode_set callback in engine structure is a much better
place for setting mixer output size and interlace mode for the following
reasons:
1. Aforementioned properties change only when mode changes, so it's
enough to be set only once per mode set. Currently it's done whenever
properties of primary plane are changed.
2. It's assumed that primary plane will always cover whole screen. While
this is true most of the time, it's not always. DE2/3 planes are
universal and mostly equal in functionality. There is no reason to
add artificial limitation to primary planes.
3. The current code only works for UI layers, but some mixers do not
have any UI layers.
Newly introduced mode_set callback in engine structure is a much better
place for setting backend output size and interlace mode for following
reasons:
1. Aforementioned properties change only when mode changes, so it's
enough to be set only once per mode set. Currently it's done whenever
properties of primary plane are changed.
2. It's assumed that primary plane will always cover whole screen. While
this is true most of the time, it's not always. Planes are universal.
There is no reason to add artificial limitation to primary plane.
This optional callback is useful for setting properties which depends
only on current mode. Such properties are width, height and interlaced
output.
These properties are currently set in update layer callback for primary
plane which is less than ideal. More about that in follow up patches,
which will migrate that code to this newly defined callback.
Samuel Holland [Sun, 24 Apr 2022 16:26:23 +0000 (11:26 -0500)]
drm/sun4i: Allow building the driver on RISC-V
Allwinner D1 is a RISC-V SoC which contains a DE 2.0 engine. Let's
remove the dependency on a specific CPU architecture, so the driver can
be built wherever ARCH_SUNXI is selected.
Samuel Holland [Sun, 24 Apr 2022 16:26:22 +0000 (11:26 -0500)]
drm/sun4i: hdmi: Use more portable I/O helpers
readsb/writesb are unavailable on some architectures. In preparation for
removing the Kconfig architecture dependency, switch to the equivalent
but more portable ioread/write8_rep helpers.
Samuel Holland [Sun, 24 Apr 2022 16:26:19 +0000 (11:26 -0500)]
dt-bindings: display: Separate clock item lists by compatible
So far, the binding and driver have relied on the fact that the H6
clocks are both a prefix and a subset of the R40 clocks. This allows
them to share the clocks/clock-names items and the clock-output-names
order between the hardware variants.
However, the D1 hardware has TCON TV0 and DSI, but no TCON TV1. This
cannot be supported by the existing scheme because it puts a gap in the
middle of the item lists. To prepare for adding D1 support, use separate
lists for variants with different combinations of clocks.
This function returns zero unconditionally, so there isn't any benefit
of returning a value. Make it return void to be able to see at a glance
that the return value of ssd130x_i2c_remove() is always zero.
This patch is a preparation for making i2c remove callbacks return void.
Marek Vasut [Sun, 17 Apr 2022 02:10:11 +0000 (04:10 +0200)]
drm: mxsfb: Obtain bus flags from bridge state
In case the MXSFB is connected to a bridge, attempt to obtain bus flags
from that bridge state too. The bus flags may specify e.g. the DE signal
polarity.
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220417021011.337066-1-marex@denx.de
Marek Vasut [Sun, 17 Apr 2022 02:08:00 +0000 (04:08 +0200)]
drm: mxsfb: Reorder mxsfb_crtc_mode_set_nofb()
Reorder mxsfb_crtc_mode_set_nofb() such that all functions which perform
register IO are called from one single location in this function. This is
a clean up. No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-4-marex@denx.de
Marek Vasut [Sun, 17 Apr 2022 02:07:59 +0000 (04:07 +0200)]
drm: mxsfb: Factor out mxsfb_set_mode()
Pull mode registers programming from mxsfb_enable_controller() into
dedicated function mxsfb_set_mode(). This is a clean up. No functional
change.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-3-marex@denx.de
Marek Vasut [Sun, 17 Apr 2022 02:07:58 +0000 (04:07 +0200)]
drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()
Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr() to correctly handle
FB offset.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-2-marex@denx.de
Marek Vasut [Sun, 17 Apr 2022 02:07:57 +0000 (04:07 +0200)]
drm: mxsfb: Wrap FIFO reset and comments into mxsfb_reset_block()
Wrap FIFO reset and comments into mxsfb_reset_block(), this is a clean up.
No functional change.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220417020800.336675-1-marex@denx.de
drm/display: Move SCDC helpers into display-helper library
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC
helpers into display/ and split the header into files for core and
helpers. Update all affected drivers. No functional changes.
To avoid the proliferation of Kconfig options, SCDC is part of DRM's
support for HDMI. If necessary, a new option could make SCDC an
independent feature.
drm/display: Move HDMI helpers into display-helper module
Move DRM's HMDI helpers into the display/ subdirectoy and add it
to DRM's display helpers. Update all affected drivers. No functional
changes.
The HDMI helpers were implemented in the EDID and connector code, but
are actually unrelated. With the move to the display-helper library, we
can remove the dependency on drm_edid.{c,h} in some driver's HDMI source
files.
Several of the HDMI helpers remain in EDID code because both share parts
of their implementation internally. With better refractoring of the EDID
code, those HDMI helpers could be moved into the display-helper library
as well.
drm/display: Move HDCP helpers into display-helper module
Move DRM's HDCP helper library into the display/ subdirectory and add
it to DRM's display helpers. Split the header file into core and helpers.
Update all affected drivers. No functional changes.
drm/display: Move DSC header and helpers into display-helper module
DSC is the Display Stream Compression standard for DisplayPort. Move
the DSC code into display/ and split the header into files for protocol
core and DRM helpers. Adapt all users of the code. No functional
changes.
To avoid the proliferation of Kconfig options, DSC is part of DRM's
support for DisplayPort. If necessary, a new option could make DSC an
independent feature.
drm/display: Split DisplayPort header into core and helper
Move DisplayPort protocol constants and structures into the new
header drm_dp.h, which can be used by DRM core components. The
existing header drm_dp_helper.h now only contains helper code for
graphics drivers. No functional changes.
drm/display: Introduce a DRM display-helper module
Replace the DP-helper module with a display-helper module. The
support for DisplayPort becomes an internal option that drivers
have to select. Update all related Kconfig and Makefile rules.
Besides the existing code for DisplayPort, the new module will
contain helpers for other video-output standards, such as HDMI.
Drivers will have to select their required video-output helpers.
Linking all display-related code into a single module avoids the
proliferation of small kernel modules.
The module parameters drm_dp_cec_unregister_delay, dp_aux_i2c_speed_khz,
and dp_aux_i2c_transfer_size are moving from the drm_dp_helper namespace
to drm_display_helper.
v2:
* mention module parameters in commit message (Javier)
* distiguish between display module and DP support in Kconfig
* update Makefile rules for DP helpers
* move Kconfig rules into separate file under display/
Rename dp/ to display/ to account for additional display-related
helpers, such as HDMI. Update all related include statements. No
functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme
by putting code for video-output standards into a local display/
directory. The new directory's name is aligned with this convention.
Marek Vasut [Wed, 6 Apr 2022 09:36:27 +0000 (11:36 +0200)]
drm/panel: simple: Add missing bus flags for Innolux G070Y2-L01
The DE signal is active high on this display, fill in the missing bus_flags.
This aligns panel_desc with its display_timing .
Fixes: 097e1162f4b0b ("drm/panel: simple: Add support for Innolux G070Y2-L01") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220406093627.18011-1-marex@denx.de
Marek Vasut [Mon, 11 Apr 2022 00:47:28 +0000 (02:47 +0200)]
drm/panel: lvds: Drop now redundant width-mm and height-mm check
The check for mandatory DT properties width-mm and height-mm is now
part of of_get_drm_panel_display_mode(), drop the redundant check
from this driver.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220411004728.68203-2-marex@denx.de
Marek Vasut [Mon, 11 Apr 2022 00:47:27 +0000 (02:47 +0200)]
drm/modes: Make width-mm/height-mm check in of_get_drm_panel_display_mode() mandatory
All users of this function require width-mm/height-mm DT property to be
present per their DT bindings, make width-mm/height-mm check mandatory.
It is generally a good idea to specify panel dimensions, so userspace
can configure e.g. scaling accordingly.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220411004728.68203-1-marex@denx.de
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220422102242.18959-2-marex@denx.de
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220422102242.18959-1-marex@denx.de
drm/vmwgfx: Reserve fence slots on buffer objects in cotables
The buffer objects created by cotables were missing fence reservations.
They are created from vmw_validation_res_validate which makes them miss
the ttm_eu_reserve_buffers which is called from vmw_validation_bo_reserve.
Cotables are the only resources which create a buffer object in the
create callback so make sure the code also reserves the slots.
Signed-off-by: Zack Rusin <zackr@vmware.com> Co-developed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Fixes: 6f3996ca4dfb ("dma-buf/drivers: make reserving a shared slot mandatory v4") Link: https://patchwork.freedesktop.org/patch/msgid/20220422161342.1142584-1-zack@kde.org
drm/doc: Add sections about tiny drivers and external refs to intro page
Learning about the DRM subsystem could be quite overwhelming for newcomers
but there are lots of useful talks, slides and articles available that can
help to understand the needed concepts and ease the learning curve.
There are also simple DRM drivers that can be used as example about how a
DRM driver should look like.
Add sections to the introduction page, that contains references to these.
drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c:80:5-8: Unneeded variable: "ret". Return "0" on line 94
drivers/gpu/drm/bridge/synopsys/dw-hdmi-gp-audio.c:105:5-8: Unneeded variable: "ret". Return "0" on line 112
Remove unneeded variable used to store return value.
Miaoqian Lin [Wed, 20 Apr 2022 01:16:40 +0000 (01:16 +0000)]
drm/bridge: Fix error handling in analogix_dp_probe
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call, as already done in the remove function.
José Expósito [Wed, 20 Apr 2022 11:44:59 +0000 (13:44 +0200)]
drm/vc4: hdmi: Replace drm_detect_hdmi_monitor() with is_hdmi
Once EDID is parsed, the monitor HDMI support information is cached in
drm_display_info.is_hdmi by drm_parse_hdmi_vsdb_video().
This driver calls drm_detect_hdmi_monitor() to receive the same
information and stores its own cached value in
vc4_hdmi_encoder.hdmi_monitor, which is less efficient.
Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead. This also allows to remove vc4_hdmi_encoder.hdmi_monitor.
drm_detect_hdmi_monitor() is called in vc4_hdmi_connector_detect() and
vc4_hdmi_connector_get_modes(). In both cases it is safe to rely on
drm_display_info.is_hdmi as shown by ftrace:
$ sudo trace-cmd record -p function_graph -l "vc4_hdmi_*" -l "drm_*"
vc4_hdmi_connector_detect:
vc4_hdmi_connector_detect() {
drm_get_edid() {
drm_connector_update_edid_property() {
drm_add_display_info() {
drm_reset_display_info();
drm_for_each_detailed_block.part.0();
drm_parse_cea_ext() {
drm_find_cea_extension();
drm_parse_hdmi_vsdb_video();
/* drm_display_info.is_hdmi is cached here */
}
}
}
}
/* drm_display_info.is_hdmi is used here */
}
vc4_hdmi_connector_get_modes:
vc4_hdmi_connector_get_modes() {
drm_get_edid() {
drm_connector_update_edid_property() {
drm_add_display_info() {
drm_reset_display_info();
drm_for_each_detailed_block.part.0();
drm_parse_cea_ext() {
drm_find_cea_extension();
drm_parse_hdmi_vsdb_video();
/* drm_display_info.is_hdmi is cached here */
}
}
}
}
/* drm_display_info.is_hdmi is used here */
drm_connector_update_edid_property();
}
drm/radeon: Use TTM builtin resource manager debugfs code
Switch to using the TTM resource manager debugfs helpers. The
functionality is largely the same.
The TTM resource managers need to stay valid for as long as the
drm debugfs_root is valid.
Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220412033526.369115-6-zack@kde.org Reviewed-by: Christian König <christian.koenig@amd.com>
drm/qxl: Use TTM builtin resource manager debugfs code
Switch to using the TTM resource manager debugfs helpers. The
functionality is largely the same.
The TTM resource managers need to stay valid for as long as the
drm debugfs_root is valid.
Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220412033526.369115-5-zack@kde.org Reviewed-by: Christian König <christian.koenig@amd.com>
drm/amdgpu: Use TTM builtin resource manager debugfs code
Switch to using the TTM resource manager debugfs helpers. It's
exactly the same functionality but the debugfs code is shared with
other drivers.
The TTM resource managers need to stay valid for as long as the
drm debugfs_root is valid.
Signed-off-by: Zack Rusin <zackr@vmware.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Nirmoy Das <nirmoy.das@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: amd-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220412033526.369115-4-zack@kde.org Reviewed-by: Christian König <christian.koenig@amd.com>
drm/vmwgfx: Add debugfs entries for various ttm resource managers
Use the newly added TTM's ability to automatically create debugfs entries
for specified placements. This creates debugfs files that can be read to
get information about various TTM resource managers which are used by
vmwgfx.
drm/ttm: Add common debugfs code for resource managers
Drivers duplicate the code required to add debugfs entries for various
ttm resource managers. To fix it add common TTM resource manager debugfs
code that each driver can reuse.
Specific resource managers can overwrite
ttm_resource_manager_func::debug to get more information from those
debugfs entries.
drm/solomon: Add SSD130x OLED displays SPI support
The ssd130x driver only provides the core support for these devices but it
does not have any bus transport logic. Add a driver to interface over SPI.
There is a difference in the communication protocol when using 4-wire SPI
instead of I2C. For the latter, a control byte that contains a D/C# field
has to be sent. This field tells the controller whether the data has to be
written to the command register or to the graphics display data memory.
But for 4-wire SPI that control byte is not used, instead a real D/C# line
must be pulled HIGH for commands data and LOW for graphics display data.
For this reason the standard SPI regmap can't be used and a custom .write
bus handler is needed.
drm/solomon: Move device info from ssd130x-i2c to the core driver
These are declared in the ssd130x-i2c transport driver but the information
is not I2C specific, and could be used by other SSD130x transport drivers.
Move them to the ssd130x core driver and just set the OF device entries to
an ID that could be used to lookup the correct device info from an array.
While being there, also move the SSD130X_DATA and SSD130X_COMMAND control
bytes. Since even though they are used by the I2C interface, they could
also be useful for other transport protocols such as SPI.
drm/solomon: Add ssd130x new compatible strings and deprecate old ones.
The current compatible strings for SSD130x I2C controllers contain an "fb"
and "-i2c" suffixes. These have been deprecated and more correct ones were
added, that don't encode a subsystem or bus used to interface the devices.
The current compatible strings for SSD130x I2C controllers contain both an
"fb" and "-i2c" suffixes. It seems to indicate that are for a fbdev driver
and also that are for devices that can be accessed over an I2C bus.
But a DT is supposed to describe the hardware and not Linux implementation
details. So let's deprecate those compatible strings and add new ones that
only contain the vendor and device name, without any of these suffixes.
These will just describe the device and can be matched by both I2C and SPI
DRM drivers. The required properties should still be enforced for old ones.
While being there, just drop the "sinowealth,sh1106-i2c" compatible string
since that was never present in a released Linux version.
fbdev: Warn in hot-unplug workaround for framebuffers without device
A workaround makes fbdev hot-unplugging work for framebuffers without
device. The only user for this feature was offb. As each OF framebuffer
now has an associated platform device, the workaround hould no longer
be triggered. Update it with a warning and rewrite the comment. Fbdev
drivers that trigger the hot-unplug workaround really need to be fixed.
Create a platform device for each OF-declared framebuffer and have
offb bind to these devices. Allows for real hot-unplugging and other
drivers besides offb.
Originally, offb created framebuffer devices while initializing its
module by parsing the OF device tree. No actual Linux device was set
up. This tied OF framebuffers to offb and makes writing other drivers
for the OF framebuffers complicated. The absence of a Linux device
further prevented real hot-unplugging. Adding a distinct platform
device for each OF framebuffer solves both problems. Specifically, a
DRM driver can now provide graphics output for modern userspace.
Some of the offb init code is now located in the OF initialization.
There's now also an implementation of of_platform_default_populate_init(),
which was missing before. The OF side creates different devices for
either OF display nodes or BootX displays as they require different
handling by the driver. The offb drivers picks up each type of device
and runs the appropriate fbdev initialization.
Tested with OF display nodes on qemu's ppc64le target.
v3:
* declare variable 'node' with function scope (Rob)
v2:
* run PPC code as part of existing initialization (Rob)
* add a few more error warnings (Javier)
drm/gma500: fix a potential repeat execution in psb_driver_load
Instead of exiting the loop as expected when an entry is found, the
list_for_each_entry() continues until the traversal is complete. To
avoid potential executing 'ret = gma_backlight_init(dev);' repeatly,
goto outside the loop when found entry by replacing switch/case with
if statement.
Marek Vasut [Thu, 7 Apr 2022 18:56:17 +0000 (20:56 +0200)]
drm: bridge: icn6211: Add DSI lane count DT property parsing
The driver currently hard-codes DSI lane count to two, however the chip
is capable of operating in 1..4 DSI lanes mode. Parse 'data-lanes' DT
property and program the result into DSI_CTRL register.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220407185617.179573-2-marex@denx.de
It is necessary to specify the number of connected/used DSI data lanes when
using the DSI input port of this bridge. Document the 'data-lanes' property
of the DSI input port.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220407185617.179573-1-marex@denx.de
drm/bridge: anx7625: Use uint8 for lane-swing arrays
As defined in the anx7625 dt-binding, the analogix,lane0-swing and
analogix,lane1-swing properties are uint8 arrays. Yet, the driver was
reading the array as if it were of uint32 and masking to 8-bit before
writing to the registers. This means that a devicetree written in
accordance to the dt-binding would have its values incorrectly parsed.
Fix the issue by reading the array as uint8 and storing them as uint8
internally, so that we can also drop the masking when writing the
registers.
drm: bridge: dw_hdmi: Audio: Add General Parallel Audio (GPA) driver
General Parallel Audio (GPA) interface is one of the supported
audio interface for synopsys HDMI module, which has verified for
i.MX8MPlus platform.
This is initial version for GPA.
drm: bridge: dw_hdmi: Enable GCP only for Deep Color
HDMI1.4b specification section 6.5.3:
Source shall only send GCPs with non-zero CD to sinks
that indicate support for Deep Color.
DW HDMI GCP default enabled, but only transmit CD
and do not handle AVMUTE, PP norDefault_Phase (yet).
Disable Auto GCP when 24-bit color for sinks that not support Deep Color.
drm: bridge: dw_hdmi: default enable workaround to clear the overflow
i.MX8MPlus (v2.13a) has verified need the workaround to clear the
overflow with one iteration.
Only i.MX6Q(v1.30a) need the workaround with 4 iterations,
the others versions later than v1.3a have been identified as needing
the workaround with a single iteration.
Default enable the workaround with one iteration for all versions
later than v1.30a.
Marek Szyprowski [Tue, 19 Apr 2022 09:14:22 +0000 (11:14 +0200)]
drm: bridge: panel: Register connector if DRM device is already registered
If panel_bridge_attach() happens after DRM device registration, the
created connector will not be registered by the DRM core anymore. Fix
this by registering it explicitly in such case.
This fixes the following issue observed on Samsung Exynos4210-based Trats
board with a DSI panel (the panel driver is registered after the Exynos DRM
component device is bound):
$ ./modetest -c -Mexynos
could not get connector 56: No such file or directory
Segmentation fault
While touching this, move the connector reset() call also under the DRM
device registered check, because otherwise it is not really needed.
Biju Das [Tue, 19 Apr 2022 14:24:53 +0000 (15:24 +0100)]
drm: bridge: adv7511: Enable DRM_BRIDGE_OP_HPD based on HPD interrupt
Connector detection using poll method won't work in case of bridge
attached to the encoder with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR, as
the code defaults to HPD.
Enable DRM_BRIDGE_OP_HPD based on HPD interrupt availability, so that
it will fall back to polling, if HPD is not available.
Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to
Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly
capable at converting formats, but sadly it is also highly undocumented.
This driver is written without any documentation from Lontium and based
only on shreds of information available in various obscure example codes,
hence long runs of unknown register patches and lengthy delays in various
places. Whichever register meaning could be divined from its behavior has
at least a comment around it.
Currently the only mode tested is Single-link DSI to Single-link LVDS.
Dual-link LVDS might work as well, the register programming is in place,
but is untested.
Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
Add bindings for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to
Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly
capable at converting formats, but sadly it is also highly undocumented.
Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-1-marex@denx.de
Hsin-Yi Wang [Thu, 14 Apr 2022 09:00:04 +0000 (17:00 +0800)]
drm/bridge: anx7625: Fill in empty ELD when no connector
Speaker may share I2S with DP and .get_eld callback will be called when
speaker is playing. When HDMI wans't connected, the connector will be
null. Instead of return an error, fill in empty ELD.
Devarsh Thakkar [Mon, 14 Mar 2022 11:37:39 +0000 (17:07 +0530)]
drm/tidss: Soft Reset DISPC on startup
Soft reset the display subsystem controller on startup and wait for
the reset to complete. This helps the scenario where display was
already in use by some other core before the linux was booted.
Paul Cercueil [Mon, 18 Apr 2022 19:44:36 +0000 (20:44 +0100)]
Merge drm/drm-next into drm-misc-next
drm/drm-next has a build fix for the NewVision NV3052C panel
(drivers/gpu/drm/panel/panel-newvision-nv3052c.c), which needs to be
merged back to drm-misc-next, as it was failing to build there.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Imre Deak [Mon, 11 Apr 2022 13:25:39 +0000 (16:25 +0300)]
drm/dp: Factor out a function to probe a DPCD address
Factor out from drm_dp_dpcd_read() a function to probe a DPCD address
with a 1-byte read access. This will be needed by the next patch doing a
read from an LTTPR address, which must happen without the preceding
wake-up read in drm_dp_dpcd_read().
While at it add tracing for the 1 byte read even if the read was
successful.
v2: Add a probe function instead of exporting drm_dp_dpcd_access(). (Jani)
v3: Add tracing for the 1-byte read even if the read was successful. (Khaled)
Jani Nikula [Mon, 11 Apr 2022 14:00:31 +0000 (17:00 +0300)]
drm/edid: use EDID block read helper in drm_do_get_edid()
Convert drm_do_get_edit() from the base block read helper to the generic
block read helper. There's quite a bit going on here, as the corrupt and
null EDID information is moved back to the caller. As we see, they were
not all that clear to begin with, and this change underlines that.
Jani Nikula [Mon, 11 Apr 2022 14:00:30 +0000 (17:00 +0300)]
drm/edid: abstract an EDID block read helper
We have an abstraction for the EDID base block read, yet duplicating the
retries and error handling for extension block reads. Introduce a more
generic EDID block read helper.
Switch to the helper piecemeal, starting with drm_edid_get_panel_id(),
which doesn't need or have access to the connector anyway.
The subtle change is switching from drm_edid_block_valid() to
edid_block_check(). We also status print once, not for every attempt.
Dave Airlie [Thu, 14 Apr 2022 02:03:08 +0000 (12:03 +1000)]
Merge tag 'drm-intel-next-2022-04-13-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull for v5.19:
Features and functionality:
- Add support for new Tile 4 format on DG2 (Stan)
- Add support for new CCS clear color compression on DG2 (Mika, Juha-Pekka)
- Add support for new render and media compression formats on DG2 (Matt)
- Support multiple eDP and LVDS native mode refresh rates (Ville)
- Support static DRRS (Ville)
- ATS-M platform info (Matt)
- RPL-S PCI IDs (Tejas)
- Extend DP HDR support to HSW+ (Uma)
- Bump ADL-P DMC version to v2.16 (Madhumitha)
- Let users disable PSR2 while enabling PSR1 (José)
Refactoring and cleanups:
- Massive DRRS and panel fixed mode refactoring and cleanups (Ville)
- Power well refactoring and cleanup (Imre)
- Clean up and refactor crtc readout and compute config (Ville)
- Use kernel string helpers (Lucas)
- Refactor gmbus pin lookups and allocation (Jani)
- PCH display cleanups (Ville)
- DPLL and DPLL manager refactoring (Ville)
- Include and header refactoring (Jani, Tvrtko)
- DMC abstractions (Jani)
- Non-x86 build refactoring (Casey)
- VBT parsing refactoring (Ville)
- Bigjoiner refactoring (Ville)
- Optimize plane, pfit, scaler, etc. programming using unlocked writes (Ville)
- Split several register writes in commit to noarm+arm pairs (Ville)
- Clean up SAGV handling (Ville)
- Clean up bandwidth and ddb allocation (Ville)
- FBC cleanups (Ville)
Fixes:
- Fix native HDMI and DP HDMI DFP clock limits on deep color/4:2:0 (Ville)
- Fix DMC firmware platform check (Lucas)
- Fix cursor coordinates on bigjoiner secondary (Ville)
- Fix MSO vs. bigjoiner timing confusion (Ville)
- Fix ADL-P eDP voltage swing (José)
- Fix VRR capability property update (Manasi)
- Log DG2 SNPS PHY calibration errors (Matt, Lucas)
- Fix PCODE request status checks (Stan)
- Fix uncore unclaimed access warnings (Lucas)
- Fix VBT new max TMDS clock parsing (Shawn)
- Fix ADL-P non-existent underrun recovery (Swathi Dhanavanthri)
- Fix ADL-N stepping info (Tejas)
- Fix DPT mapping flags to contiguous (Stan)
- Fix DG2 max display bandwidth (Vinod)
- Fix DP low voltage SKU checks (Ankit)
- Fix RPL-S VT-d translation enable via quirk (Tejas)
- Fixes to PSR2 (José)
- Fix PIPE_MBUS_DBOX_CTL programming (José)
- Fix LTTPR capability read/check on DP 1.2 (Imre)
- Fix ADL-P register corruption after DDI clock enabling (Imre)
- Fix ADL-P MBUS DBOX BW and B credits (Caz)
Daniel Vetter [Wed, 13 Apr 2022 08:21:28 +0000 (10:21 +0200)]
fbcon: Fix delayed takeover locking
I messed up the delayed takover path in the locking conversion in 0627f2704a33 ("fbcon: Move console_lock for register/unlink/unregister").
If CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is enabled, fbcon take-over
doesn't take place when calling fbcon_fb_registered(). Instead, is deferred
using a workqueue and its fbcon_register_existing_fbs() function calls to
fbcon_fb_registered() again for each registered fbcon fb.
This leads to the console_lock tried to be held twice, causing a deadlock.
Fix it by re-extracting the lockless function and using it in the
delayed takeover path, where we need to hold the lock already to
iterate over the list of already registered fb. Well the current code
still is broken in there (since the list is protected by a
registration_lock, which we can't take here because it nests the other
way round with console_lock), but in the future this will be a list
protected by console_lock when this is all sorted out.
While reviewing the broken commit I realized that I've left some
outdated comments about the locking behind. Fix those too.
v2: Improve commit message (Javier)
Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Fixes: 0627f2704a33 ("fbcon: Move console_lock for register/unlink/unregister") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Du Cheng <ducheng2@gmail.com> Cc: Claudio Suarez <cssk@net-c.es> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Matthew Wilcox <willy@infradead.org> Cc: Zheyu Ma <zheyuma97@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220413082128.348186-1-daniel.vetter@ffwll.ch
Marek Vasut [Fri, 1 Apr 2022 16:21:54 +0000 (18:21 +0200)]
drm/panel: lvds: Use bus_flags from DT panel-timing property
This driver currently rewrites bus_flags based solely on the value of
DT property 'data-mirror' and ignores bus_flags which might have been
set in DT panel-timing node. Specificaly, the 'de-active' DT property
sets DRM_BUS_FLAG_DE_ bus_flags.
Since of_get_drm_panel_display_mode() conveniently parses the bus_flags
out of DT panel-timing property, just ORR them with bus_flags inferred
from 'data-mirror' DT property and use the result as panel bus_flags.
This fixes handling of panels with 'panel-timing { de-active = <1>; };'.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-2-marex@denx.de
Marek Vasut [Fri, 1 Apr 2022 16:21:53 +0000 (18:21 +0200)]
drm/panel: lvds: Simplify mode parsing
The mode parsing is currently implemented in three steps:
of_get_display_timing() - DT panel-timing to struct display_timing
videomode_from_timing() - struct display_timing to struct videomode
drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode
Replace all that with simple of_get_drm_panel_display_mode() call,
which already populates struct drm_display_mode and then duplicate
that mode in panel_lvds_get_modes() each time, since the mode does
not change.
Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode()
out of panel-timing DT node, which is used in subsequent patch to fix
handling of 'de-active' DT property.
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-1-marex@denx.de
Marek Vasut [Sun, 3 Apr 2022 17:10:04 +0000 (19:10 +0200)]
drm: bridge: icn6211: Convert to regmap
To make debugging easier, convert driver to regmap. Implement read and write
regmap tables for known registers, keep all known register readable and mark
those which are obviously read-only as not writeable.
Use common I2C regmap for the I2C configuration, implement custom regmap bus
for DSI configuration. The later is mandatory as this chip requires one extra
byte set to read access length between register address and data.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Acked-by: Mark Brown <broonie@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
Ville Syrjälä [Tue, 15 Mar 2022 14:00:00 +0000 (16:00 +0200)]
drm/i915/fbc: Introduce intel_fbc_sanitize()
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Ville Syrjälä [Tue, 15 Mar 2022 13:59:59 +0000 (15:59 +0200)]
drm/i915/fbc: Remove intel_fbc_global_disable()
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Ville Syrjälä [Tue, 15 Mar 2022 13:59:57 +0000 (15:59 +0200)]
drm/i915/fbc: Skip nuke when flip is pending
Don't issue a nuke from frontbuffer flush while a flip is pending.
This avoids the DSPADDR/DSPSURF rmw abuse from the pre-snb nuke
from racing with the DSPADDR/DSPSURF write being performed by
the flip/plane update. The flip itself will already cause the nuke
so a double nuke is redundant.
projects / kernel.git / log