David S. Miller [Sat, 18 Dec 2021 12:19:15 +0000 (12:19 +0000)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-17
Maciej Fijalkowski says:
It seems that previous [0] Rx fix was not enough and there are still
issues with AF_XDP Rx ZC support in ice driver. Elza reported that for
multiple XSK sockets configured on a single netdev, some of them were
becoming dead after a while. We have spotted more things that needed to
be addressed this time. More of information can be found in particular
commit messages.
It also carries Alexandr's patch that was sent previously which was
overlapping with this set.
George Kennedy [Thu, 16 Dec 2021 18:25:32 +0000 (13:25 -0500)]
tun: avoid double free in tun_free_netdev
Avoid double free in tun_free_netdev() by moving the
dev->tstats and tun->security allocs to a new ndo_init routine
(tun_net_init()) that will be called by register_netdevice().
ndo_init is paired with the desctructor (tun_free_netdev()),
so if there's an error in register_netdevice() the destructor
will handle the frees.
BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605
In line:
upper = info->upper_dev;
We access upper_dev field, which is related only for particular events
(e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory
access for another events,
when ptr is not netdev_notifier_changeupper_info.
The tipc_aead_init() function can be calling from an interrupt routine.
This allocation might sleep with GFP_KERNEL flag, hence the following BUG
is reported.
If the user sets a lower mtu on the CPU port than on the switch,
then DMA inserts a few more bytes into the buffer than expected.
In the worst case, it may exceed the size of the buffer. The
experiments showed that the buffer should be a multiple of the
burst length value. This patch rounds the length of the rx buffer
upwards and fixes this bug. The reservation of FCS space in the
buffer has been removed as PMAC strips the FCS.
Fixes: 4e16cb068c5a ("net: lantiq: add support for jumbo frames") Reported-by: Thomas Nixon <tom@tomn.co.uk> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net/sched: Fix ct zone matching for invalid conntrack state
Currently, when a packet is marked as invalid conntrack_in in act_ct,
post_ct will be set, and connection info (nf_conn) will be removed
from the skb. Later openvswitch and flower matching will parse this
as ct_state=+trk+inv. But because the connection info is missing,
there is also no zone info to match against even though the packet
is tracked.
This series fixes that, by passing the last executed zone by act_ct.
The zone info is passed along from act_ct to the ct flow dissector
(used by flower to extract zone info) and to ovs, the same way as post_ct
is passed, via qdisc layer skb cb to dissector, and via skb extension
to OVS.
Since adding any more data to qdisc skb cb, there will be no room
for BPF skb cb to extend it and stay under skb->cb size, this series
moves the tc related info from within qdisc skb cb to a tc specific cb
that also extends it.
====================
Paul Blakey [Tue, 14 Dec 2021 17:24:35 +0000 (19:24 +0200)]
net: openvswitch: Fix matching zone id for invalid conns arriving from tc
Zone id is not restored if we passed ct and ct rejected the connection,
as there is no ct info on the skb.
Save the zone from tc skb cb to tc skb extension and pass it on to
ovs, use that info to restore the zone id for invalid connections.
Fixes: d756d80c98a9 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Tue, 14 Dec 2021 17:24:34 +0000 (19:24 +0200)]
net/sched: flow_dissector: Fix matching on zone id for invalid conns
If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.
To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).
Fixes: 4c72a1db37dc ("net/sched: cls_flower add CT_FLAGS_INVALID flag support") Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Blakey [Tue, 14 Dec 2021 17:24:33 +0000 (19:24 +0200)]
net/sched: Extend qdisc control block with tc control block
BPF layer extends the qdisc control block via struct bpf_skb_data_end
and because of that there is no more room to add variables to the
qdisc layer control block without going over the skb->cb size.
Extend the qdisc control block with a tc control block,
and move all tc related variables to there as a pre-step for
extending the tc control block with additional members.
Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and
later on during the Rx processing it is incremented per each frame that
driver consumed. This can result in excessive buffers requested from xsk
pool based on that value.
To address this, just drop cleaned_count and pass
ICE_DESC_UNUSED(rx_ring) directly as a function argument to
ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed.
Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of
ice_clean_rx_irq_zc. This has been changed in that way for corresponding
ice_clean_rx_irq, but not here.
Fixes: a40d09f79c37 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: xsk: allow empty Rx descriptors on XSK ZC data path
Commit 2804ff83c889 ("ice: allow empty Rx descriptors") stated that ice
HW can produce empty descriptors that are valid and they should be
processed.
Add this support to xsk ZC path to avoid potential processing problems.
Fixes: a40d09f79c37 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor
The descriptor that ntu is pointing at when we exit
ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared
as descriptor is not allocated in there and it is not valid for HW
usage.
The allocation routine at the entry will fill the descriptor that ntu
points to after it was set to ntu + nb_buffs on previous call.
Even the spec says:
"The tail pointer should be set to one descriptor beyond the last empty
descriptor in host descriptor ring."
Therefore, step away from clearing the status_error0 on ntu + nb_buffs
descriptor.
Fixes: 8a0becfb7d89 ("ice: Use the xsk batched rx allocation interface") Reported-by: Elza Mathew <elza.mathew@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'if (ntu == rx_ring->count)' block in ice_alloc_rx_buffers_zc()
was previously residing in the loop, but after introducing the
batched interface it is used only to wrap-around the NTU descriptor,
thus no more need to assign 'xdp'.
Fixes: 8a0becfb7d89 ("ice: Use the xsk batched rx allocation interface") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: xsk: allocate separate memory for XDP SW ring
Currently, the zero-copy data path is reusing the memory region that was
initially allocated for an array of struct ice_rx_buf for its own
purposes. This is error prone as it is based on the ice_rx_buf struct
always being the same size or bigger than what the zero-copy path needs.
There can also be old values present in that array giving rise to errors
when the zero-copy path uses it.
Fix this by freeing the ice_rx_buf region and allocating a new array for
the zero-copy path that has the right length and is initialized to zero.
Fixes: cfb57a30aa07 ("ice: Use xdp_buf instead of rx_buf for xsk zero-copy") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: xsk: return xsk buffers back to pool when cleaning the ring
Currently we only NULL the xdp_buff pointer in the internal SW ring but
we never give it back to the xsk buffer pool. This means that buffers
can be leaked out of the buff pool and never be used again.
Add missing xsk_buff_free() call to the routine that is supposed to
clean the entries that are left in the ring so that these buffers in the
umem can be used by other sockets.
Also, only go through the space that is actually left to be cleaned
instead of a whole ring.
Fixes: a40d09f79c37 ("ice: Add support for AF_XDP") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Thu, 16 Dec 2021 23:02:14 +0000 (15:02 -0800)]
Merge tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, wifi, bpf.
Relatively large batches of fixes from BPF and the WiFi stack, calm in
general networking.
Current release - regressions:
- dpaa2-eth: fix buffer overrun when reporting ethtool statistics
Current release - new code bugs:
- bpf: fix incorrect state pruning for <8B spill/fill
- iavf:
- add missing unlocks in iavf_watchdog_task()
- do not override the adapter state in the watchdog task (again)
- mlxsw: spectrum_router: consolidate MAC profiles when possible
Previous releases - regressions:
- mac80211 fixes:
- rate control, avoid driver crash for retransmitted frames
- regression in SSN handling of addba tx
- a memory leak where sta_info is not freed
- marking TX-during-stop for TX in in_reconfig, prevent stall
- cfg80211: acquire wiphy mutex on regulatory work
- wifi drivers: fix build regressions and LED config dependency
- virtio_net: fix rx_drops stat for small pkts
- dsa: mv88e6xxx: unforce speed & duplex in mac_link_down()
Previous releases - always broken:
- bpf fixes:
- kernel address leakage in atomic fetch
- kernel address leakage in atomic cmpxchg's r0 aux reg
- signed bounds propagation after mov32
- extable fixup offset
- extable address check
- mac80211:
- fix the size used for building probe request
- send ADDBA requests using the tid/queue of the aggregation
session
- agg-tx: don't schedule_and_wake_txq() under sta->lock, avoid
deadlocks
- validate extended element ID is present
- mptcp:
- never allow the PM to close a listener subflow (null-defer)
- clear 'kern' flag from fallback sockets, prevent crash
- fix deadlock in __mptcp_push_pending()
- inet_diag: fix kernel-infoleak for UDP sockets
- xsk: do not sleep in poll() when need_wakeup set
- smc: avoid very long waits in smc_release()
- sch_ets: don't remove idle classes from the round-robin list
- netdevsim:
- zero-initialize memory for bpf map's value, prevent info leak
- don't let user space overwrite read only (max) ethtool parms
- ixgbe: set X550 MDIO speed before talking to PHY
- stmmac:
- fix null-deref in flower deletion w/ VLAN prio Rx steering
- dwmac-rk: fix oob read in rk_gmac_setup
- ice: time stamping fixes
- systemport: add global locking for descriptor life cycle"
* tag 'net-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (89 commits)
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
sit: do not call ipip6_dev_free() from sit_init_net()
net: systemport: Add global locking for descriptor lifecycle
net/smc: Prevent smc_release() from long blocking
net: Fix double 0x prefix print in SKB dump
virtio_net: fix rx_drops stat for small pkts
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
sfc_ef100: potential dereference of null pointer
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
net: usb: lan78xx: add Allied Telesis AT29M2-AF
net/packet: rx_owner_map depends on pg_vec
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
dpaa2-eth: fix ethtool statistics
ixgbe: set X550 MDIO speed before talking to PHY
...
Linus Torvalds [Thu, 16 Dec 2021 22:48:57 +0000 (14:48 -0800)]
Merge tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of DT fixes, mostly for mistakes found through
static checking of the dts files again, as well as a couple of minor
changes to address incorrect DT settings.
For i.MX, there is yet another series of devitree changes to update
RGMII delay settings for ethernet, which is an ongoing problem after
some driver changes.
For SoC specific device drivers, a number of smaller fixes came up:
- i.MX SoC identification was incorrectly registered non-i.MX
machines when the driver is built-in
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- a few compile fixes for warnings that get in the way of -Werror
- a string overflow in the scpi firmware driver
- a boot failure with FORTIFY_SOURCE on Rockchips machines
- broken error handling in the AMD TEE driver
- a revert for a tegra reset driver commit that broke HDA"
* tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc/tegra: fuse: Fix bitwise vs. logical OR warning
firmware: arm_scpi: Fix string overflow in SCPI genpd driver
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
ARM: socfpga: dts: fix qspi node compatible
arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
dt-bindings: i2c: apple,i2c: allow multiple compatibles
arm64: meson: remove COMMON_CLK
arm64: meson: fix dts for JetHub D1
tee: amdtee: fix an IS_ERR() vs NULL bug
arm64: dts: apple: change ethernet0 device type to ethernet
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: rockchip: fix poweroff on helios64
arm64: dts: rockchip: fix audio-supply for Rock Pi 4
arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
...
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 12 files changed, 434 insertions(+), 30 deletions(-).
The main changes are:
1) Fix incorrect verifier state pruning behavior for <8B register spill/fill,
from Paul Chaignon.
2) Fix x86-64 JIT's extable handling for fentry/fexit when return pointer
is an ERR_PTR(), from Alexei Starovoitov.
3) Fix 3 different possibilities that BPF verifier missed where unprivileged
could leak kernel addresses, from Daniel Borkmann.
4) Fix xsk's poll behavior under need_wakeup flag, from Magnus Karlsson.
5) Fix an oob-write in test_verifier due to a missed MAX_NR_MAPS bump,
from Kumar Kartikeya Dwivedi.
6) Fix a race in test_btf_skc_cls_ingress selftest, from Martin KaFai Lau.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
selftest/bpf: Add a test that reads various addresses.
bpf: Fix extable address check.
bpf: Fix extable fixup offset.
bpf, selftests: Add test case trying to taint map value pointer
bpf: Make 32->64 bounds propagation slightly more robust
bpf: Fix signed bounds propagation after mov32
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
bpf: Fix kernel address leakage in atomic cmpxchg's r0 aux reg
bpf, selftests: Add test case for atomic fetch on spilled pointer
bpf: Fix kernel address leakage in atomic fetch
selftests/bpf: Fix OOB write in test_verifier
xsk: Do not sleep in poll() when need_wakeup set
selftests/bpf: Tests for state pruning with u32 spill/fill
bpf: Fix incorrect state pruning for <8B spill/fill
====================
Martin KaFai Lau [Thu, 16 Dec 2021 19:16:30 +0000 (11:16 -0800)]
bpf, selftests: Fix racing issue in btf_skc_cls_ingress test
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 3261b8bd461e ("bpf: selftest: Add test_btf_skc_cls_ingress") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
selftest/bpf: Add a test that reads various addresses.
Add a function to bpf_testmod that returns invalid kernel and user addresses.
Then attach an fexit program to that function that tries to read
memory through these addresses.
This logic checks that bpf_probe_read_kernel and BPF_PROBE_MEM logic is sane.
Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The verifier checks that PTR_TO_BTF_ID pointer is either valid or NULL,
but it cannot distinguish IS_ERR pointer from valid one.
When offset is added to IS_ERR pointer it may become small positive
value which is a user address that is not handled by extable logic
and has to be checked for at the runtime.
Tighten BPF_PROBE_MEM pointer check code to prevent this case.
Fixes: 643d483d7b91 ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Reported-by: Lorenzo Fontana <lorenzo.fontana@elastic.co> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The prog - start_of_ldx is the offset before the faulting ldx to the location
after it, so this will be used to adjust pt_regs->ip for jumping over it and
continuing, and with old temp it would have been fixed up to the wrong offset,
causing crash.
Fixes: 643d483d7b91 ("bpf: Emit explicit NULL pointer checks for PROBE_LDX instructions.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linus Torvalds [Thu, 16 Dec 2021 19:48:59 +0000 (11:48 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single fix for the clk framework that needed some more bake time in
linux-next.
The problem is that two clks being registered at the same time can
lead to a busted clk tree if the parent isn't fully registered by the
time the child finds the parent. We rejigger the place where we mark
the parent as fully registered so that the child can't find the parent
until things are proper"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Don't parent clks until the parent is fully registered
Daniel Borkmann [Wed, 15 Dec 2021 22:28:48 +0000 (22:28 +0000)]
bpf: Make 32->64 bounds propagation slightly more robust
Make the bounds propagation in __reg_assign_32_into_64() slightly more
robust and readable by aligning it similarly as we did back in the
__reg_combine_64_into_32() counterpart. Meaning, only propagate or
pessimize them as a smin/smax pair.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Wed, 15 Dec 2021 22:02:19 +0000 (22:02 +0000)]
bpf: Fix signed bounds propagation after mov32
For the case where both s32_{min,max}_value bounds are positive, the
__reg_assign_32_into_64() directly propagates them to their 64 bit
counterparts, otherwise it pessimises them into [0,u32_max] universe and
tries to refine them later on by learning through the tnum as per comment
in mentioned function. However, that does not always happen, for example,
in mov32 operation we call zext_32_to_64(dst_reg) which invokes the
__reg_assign_32_into_64() as is without subsequent bounds update as
elsewhere thus no refinement based on tnum takes place.
Thus, not calling into the __update_reg_bounds() / __reg_deduce_bounds() /
__reg_bound_offset() triplet as we do, for example, in case of ALU ops via
adjust_scalar_min_max_vals(), will lead to more pessimistic bounds when
dumping the full register state:
Technically, the smin_value=0 and smax_value=4294967295 bounds are not
incorrect, but given the register is still a constant, they break assumptions
about const scalars that smin_value == smax_value and umin_value == umax_value.
Without the smin_value == smax_value and umin_value == umax_value invariant
being intact for const scalars, it is possible to leak out kernel pointers
from unprivileged user space if the latter is enabled. For example, when such
registers are involved in pointer arithmtics, then adjust_ptr_min_max_vals()
will taint the destination register into an unknown scalar, and the latter
can be exported and stored e.g. into a BPF map value.
Fixes: 576785048b47 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Kuee K1r0a <liulin063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Thu, 16 Dec 2021 18:44:20 +0000 (10:44 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix missing error code on kexec failure path"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec: Fix missing error code 'ret' warning in load_other_segments()
Linus Torvalds [Thu, 16 Dec 2021 18:05:49 +0000 (10:05 -0800)]
Merge tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix use after free in DM btree remove's rebalance_children()
- Fix DM integrity data corruption, introduced during 5.16 merge, due
to improper use of bvec_kmap_local()
* tag 'for-5.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix data corruption due to improper use of bvec_kmap_local
dm btree remove: fix use after free in rebalance_children()
Return code is not set to an error code in load_other_segments() when
of_kexec_alloc_and_setup_fdt() call returns a NULL dtb. This results
in status success (return code set to 0) being returned from
load_other_segments().
Set return code to -EINVAL if of_kexec_alloc_and_setup_fdt() returns
NULL dtb.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 843ef14bcdb1 ("arm64: Use common of_kexec_alloc_and_setup_fdt()") Link: https://lore.kernel.org/r/20211210010121.101823-1-nramas@linux.microsoft.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
David Howells [Tue, 14 Dec 2021 09:22:12 +0000 (09:22 +0000)]
afs: Fix mmap
Fix afs_add_open_map() to check that the vnode isn't already on the list
when it adds it. It's possible that afs_drop_open_mmap() decremented
the cb_nr_mmap counter, but hadn't yet got into the locked section to
remove it.
Also vnode->cb_mmap_link should be initialised, so fix that too.
Fixes: 5c5ec604ae2a ("afs: Fix mmap coherency vs 3rd-party changes") Reported-by: kafs-testing+fedora34_64checkkafs-build-300@auristor.com Suggested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kafs-testing+fedora34_64checkkafs-build-300@auristor.com
cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/686465.1639435380@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Fainelli [Wed, 15 Dec 2021 20:24:49 +0000 (12:24 -0800)]
net: systemport: Add global locking for descriptor lifecycle
The descriptor list is a shared resource across all of the transmit queues, and
the locking mechanism used today only protects concurrency across a given
transmit queue between the transmit and reclaiming. This creates an opportunity
for the SYSTEMPORT hardware to work on corrupted descriptors if we have
multiple producers at once which is the case when using multiple transmit
queues.
This was particularly noticeable when using multiple flows/transmit queues and
it showed up in interesting ways in that UDP packets would get a correct UDP
header checksum being calculated over an incorrect packet length. Similarly TCP
packets would get an equally correct checksum computed by the hardware over an
incorrect packet length.
The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges
when the driver produces a new descriptor anytime it writes to the
WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to
re-organize its descriptors and it is possible that concurrent TX queues
eventually break this internal allocation scheme to the point where the
length/status part of the descriptor gets used for an incorrect data buffer.
The fix is to impose a global serialization for all TX queues in the short
section where we are writing to the WRITE_PORT_{HI,LO} registers which solves
the corruption even with multiple concurrent TX queues being used.
D. Wythe [Wed, 15 Dec 2021 12:29:21 +0000 (20:29 +0800)]
net/smc: Prevent smc_release() from long blocking
In nginx/wrk benchmark, there's a hung problem with high probability
on case likes that: (client will last several minutes to exit)
server: smc_run nginx
client: smc_run wrk -c 10000 -t 1 http://server
Client hangs with the following backtrace:
0 [ffffa7ce8Of3bbf8] __schedule at ffffffff9f9eOd5f
1 [ffffa7ce8Of3bc88] schedule at ffffffff9f9eløe6
2 [ffffa7ce8Of3bcaO] schedule_timeout at ffffffff9f9e3f3c
3 [ffffa7ce8Of3bd2O] wait_for_common at ffffffff9f9el9de
4 [ffffa7ce8Of3bd8O] __flush_work at ffffffff9fOfeOl3
5 [ffffa7ce8øf3bdfO] smc_release at ffffffffcO697d24 [smc]
6 [ffffa7ce8Of3be2O] __sock_release at ffffffff9f8O2e2d
7 [ffffa7ce8Of3be4ø] sock_close at ffffffff9f8ø2ebl
8 [ffffa7ce8øf3be48] __fput at ffffffff9f334f93
9 [ffffa7ce8Of3be78] task_work_run at ffffffff9flOlff5
10 [ffffa7ce8Of3beaO] do_exit at ffffffff9fOe5Ol2
11 [ffffa7ce8Of3bflO] do_group_exit at ffffffff9fOe592a
12 [ffffa7ce8Of3bf38] __x64_sys_exit_group at ffffffff9fOe5994
13 [ffffa7ce8Of3bf4O] do_syscall_64 at ffffffff9f9d4373
14 [ffffa7ce8Of3bfsO] entry_SYSCALL_64_after_hwframe at ffffffff9fa0007c
This issue dues to flush_work(), which is used to wait for
smc_connect_work() to finish in smc_release(). Once lots of
smc_connect_work() was pending or all executing work dangling,
smc_release() has to block until one worker comes to free, which
is equivalent to wait another smc_connnect_work() to finish.
In order to fix this, There are two changes:
1. For those idle smc_connect_work(), cancel it from the workqueue; for
executing smc_connect_work(), waiting for it to finish. For that
purpose, replace flush_work() with cancel_work_sync().
2. Since smc_connect() hold a reference for passive closing, if
smc_connect_work() has been cancelled, release the reference.
Fixes: 67f98918e75b ("net/smc: rebuild nonblocking connect") Reported-by: Tony Lu <tonylu@linux.alibaba.com> Tested-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/1639571361-101128-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Thu, 16 Dec 2021 09:28:25 +0000 (11:28 +0200)]
net: Fix double 0x prefix print in SKB dump
When printing netdev features %pNF already takes care of the 0x prefix,
remove the explicit one.
Fixes: 74fd0b22ca13 ("skbuff: increase verbosity when dumping skb data") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenliang Wang [Thu, 16 Dec 2021 03:11:35 +0000 (11:11 +0800)]
virtio_net: fix rx_drops stat for small pkts
We found the stat of rx drops for small pkts does not increment when
build_skb fail, it's not coherent with other mode's rx drops stat.
Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Eremeev [Wed, 15 Dec 2021 17:30:32 +0000 (20:30 +0300)]
dsa: mv88e6xxx: fix debug print for SPEED_UNFORCED
Debug print uses invalid check to detect if speed is unforced:
(speed != SPEED_UNFORCED) should be used instead of (!speed).
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Eremeev <Axtone4all@yandex.ru> Fixes: f4b4622108c0 ("net: dsa: mv88e6xxx: add port's MAC speed setter") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Wed, 15 Dec 2021 14:37:31 +0000 (22:37 +0800)]
sfc_ef100: potential dereference of null pointer
The return value of kmalloc() needs to be checked.
To avoid use in efx_nic_update_stats() in case of the failure of alloc.
Fixes: a55cfb214878 ("sfc_ef100: statistics gathering") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
John Keeping [Tue, 14 Dec 2021 19:10:09 +0000 (19:10 +0000)]
net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup
KASAN reports an out-of-bounds read in rk_gmac_setup on the line:
while (ops->regs[i]) {
This happens for most platforms since the regs flexible array member is
empty, so the memory after the ops structure is being read here. It
seems that mostly this happens to contain zero anyway, so we get lucky
and everything still works.
To avoid adding redundant data to nearly all the ops structures, add a
new flag to indicate whether the regs field is valid and avoid this loop
when it is not.
Fixes: f6cbed57c8dd ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 15 Dec 2021 14:39:37 +0000 (09:39 -0500)]
net/packet: rx_owner_map depends on pg_vec
Packet sockets may switch ring versions. Avoid misinterpreting state
between versions, whose fields share a union. rx_owner_map is only
allocated with a packet ring (pg_vec) and both are swapped together.
If pg_vec is NULL, meaning no packet ring was allocated, then neither
was rx_owner_map. And the field may be old state from a tpacket_v3.
Fixes: 6b1d969bc861 ("net/packet: tpacket_rcv: avoid a producer race condition") Reported-by: Syzbot <syzbot+1ac0994a0a0c55151121@syzkaller.appspotmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211215143937.106178-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Haimin Zhang [Wed, 15 Dec 2021 11:15:30 +0000 (19:15 +0800)]
netdevsim: Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
Zero-initialize memory for new map's value in function nsim_bpf_map_alloc
since it may cause a potential kernel information leak issue, as follows:
1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for
a new map.
2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't
zero it.
3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific
element's information in the map.
4. The kernel function map_lookup_elem will call bpf_map_copy_value to get
the information allocated at step-2, then use copy_to_user to copy to the
user buffer.
This can only leak information for an array map.
Fixes: c80225d11804 ("netdevsim: bpf: support fake map offload") Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Haimin Zhang <tcs.kernel@gmail.com> Link: https://lore.kernel.org/r/20211215111530.72103-1-tcs.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ioana Ciornei [Wed, 15 Dec 2021 10:58:31 +0000 (12:58 +0200)]
dpaa2-eth: fix ethtool statistics
Unfortunately, with the blamed commit I also added a side effect in the
ethtool stats shown. Because I added two more fields in the per channel
structure without verifying if its size is used in any way, part of the
ethtool statistics were off by 2.
Fix this by not looking up the size of the structure but instead on a
fixed value kept in a macro.
Ignacy Gawędzki [Fri, 10 Dec 2021 15:31:27 +0000 (16:31 +0100)]
netfilter: fix regression in looped (broad|multi)cast's MAC handling
In commit a668aefe02c3 ("netfilter: nfnetlink_queue: fix OOB when mac
header was cleared"), the test for non-empty MAC header introduced in
commit 5616022f9da369 ("netfilter: fix looped (broad|multi)cast's MAC
handling") has been replaced with a test for a set MAC header.
This breaks the case when the MAC header has been reset (using
skb_reset_mac_header), as is the case with looped-back multicast
packets. As a result, the packets ending up in NFQUEUE get a bogus
hwaddr interpreted from the first bytes of the IP header.
This patch adds a test for a non-empty MAC header in addition to the
test for a set MAC header. The same two tests are also implemented in
nfnetlink_log.c, where the initial code of commit 5616022f9da369
("netfilter: fix looped (broad|multi)cast's MAC handling") has not been
touched, but where supposedly the same situation may happen.
Fixes: a668aefe02c3 ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared") Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Eric Dumazet [Mon, 13 Dec 2021 13:45:44 +0000 (05:45 -0800)]
netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()
We need to use list_for_each_entry_safe() iterator
because we can not access @catchall after kfree_rcu() call.
syzbot reported:
BUG: KASAN: use-after-free in nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline]
BUG: KASAN: use-after-free in nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline]
BUG: KASAN: use-after-free in nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493
Read of size 8 at addr ffff8880716e5b80 by task syz-executor.3/8871
Memory state around the buggy address: ffff8880716e5a80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880716e5b00: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
>ffff8880716e5b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^ ffff8880716e5c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880716e5c80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
Fixes: 4344921cea3b ("netfilter: nftables: add catch-all set element support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cyril Novikov [Tue, 2 Nov 2021 01:39:36 +0000 (18:39 -0700)]
ixgbe: set X550 MDIO speed before talking to PHY
The MDIO bus speed must be initialized before talking to the PHY the first
time in order to avoid talking to it using a speed that the PHY doesn't
support.
This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on
Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network
plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined
with the 10Gb network results in a 24MHz MDIO speed, which is apparently
too fast for the connected PHY. PHY register reads over MDIO bus return
garbage, leading to initialization failure.
Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using
the following setup:
* Use an Atom C3000 family system with at least one X552 LAN on the SoC
* Disable PXE or other BIOS network initialization if possible
(the interface must not be initialized before Linux boots)
* Connect a live 10Gb Ethernet cable to an X550 port
* Power cycle (not reset, doesn't always work) the system and boot Linux
* Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17
Fixes: bcd6384d7d25 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mike Snitzer [Wed, 15 Dec 2021 17:31:51 +0000 (12:31 -0500)]
dm integrity: fix data corruption due to improper use of bvec_kmap_local
Commit 9fd3b1ce0d4f ("dm integrity: use bvec_kmap_local in
__journal_read_write") didn't account for __journal_read_write() later
adding the biovec's bv_offset. As such using bvec_kmap_local() caused
the start of the biovec to be skipped.
Trivial test that illustrates data corruption:
# integritysetup format /dev/pmem0
# integritysetup open /dev/pmem0 integrityroot
# mkfs.xfs /dev/mapper/integrityroot
...
bad magic number
bad magic number
Metadata corruption detected at xfs_sb block 0x0/0x1000
libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000
releasing dirty buffer (bulk) to free list!
Fix this by using kmap_local_page() instead of bvec_kmap_local() in
__journal_read_write().
Fixes: 9fd3b1ce0d4f ("dm integrity: use bvec_kmap_local in __journal_read_write") Reported-by: Tony Asleson <tasleson@redhat.com> Reviewed-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit a9d844bfbf2b ("ixgbe: Add ethtool support to enable 2.5 and 5.0
Gbps support") introduced suppression of the advertisement of NBASE-T
speeds by default, according to Todd Fujinaka to accommodate customers
with network switches which could not cope with advertised NBASE-T
speeds, as posted in the E1000-devel mailing list:
However, the suppression was not documented at all, nor was how to
enable NBASE-T support.
Properly document the NBASE-T suppression and how to enable NBASE-T
support.
Fixes: a9d844bfbf2b ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sasha Neftin [Tue, 2 Nov 2021 07:20:06 +0000 (09:20 +0200)]
igc: Fix typo in i225 LTR functions
The LTR maximum value was incorrectly written using the scale from
the LTR minimum value. This would cause incorrect values to be sent,
in cases where the initial calculation lead to different min/max scales.
Letu Ren [Sat, 13 Nov 2021 03:42:34 +0000 (11:42 +0800)]
igbvf: fix double free in `igbvf_probe`
In `igbvf_probe`, if register_netdev() fails, the program will go to
label err_hw_init, and then to label err_ioremap. In free_netdev() which
is just below label err_ioremap, there is `list_for_each_entry_safe` and
`netif_napi_del` which aims to delete all entries in `dev->napi_list`.
The program has added an entry `adapter->rx_ring->napi` which is added by
`netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has
been freed below label err_hw_init. So this a UAF.
In terms of how to patch the problem, we can refer to igbvf_remove() and
delete the entry before `adapter->rx_ring`.
Fixes: ac92e453a3681 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Karen Sornek [Tue, 31 Aug 2021 11:16:35 +0000 (13:16 +0200)]
igb: Fix removal of unicast MAC filters of VFs
Move checking condition of VF MAC filter before clearing
or adding MAC filter to VF to prevent potential blackout caused
by removal of necessary and working VF's MAC filter.
Fixes: 089e281baef6 ("igb: add VF trust infrastructure") Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 15 Dec 2021 19:06:41 +0000 (11:06 -0800)]
Merge tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"An SGID directory handling fix (marked for stable), a metrics
accounting fix and two fixups to appease static checkers"
* tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client:
ceph: fix up non-directory creation in SGID directories
ceph: initialize pathlen variable in reconnect_caps_cb
ceph: initialize i_size variable in ceph_sync_read
ceph: fix duplicate increment of opened_inodes metric
Linus Torvalds [Wed, 15 Dec 2021 18:52:01 +0000 (10:52 -0800)]
Merge tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Add missing handling of R_390_PLT32DBL relocation type in
arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3
generate such relocation entries, which our relocation code silently
ignores, and which finally will result in an endless loop within the
purgatory code in case of kexec.
- Add proper handling of errors and print error messages when applying
relocations
- Fix duplicate tracking of irq nesting level in entry code
- Let recordmcount.pl also look for jgnop mnemonic. Starting with
binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which
breaks mcount location detection. This is only a problem if used with
compilers older than gcc 9, since with gcc 9 and newer compilers
recordmcount.pl is not used anymore.
- Remove preempt_disable()/preempt_enable() pair in
kprobe_ftrace_handler() which was done for all architectures except
for s390.
- Update defconfig
* tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
recordmcount.pl: look for jgnop instruction as well as bcrl on s390
s390/entry: fix duplicate tracking of irq nesting level
s390: enable switchdev support in defconfig
s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add()
s390/ftrace: remove preempt_disable()/preempt_enable() pair
s390/kexec_file: fix error handling when applying relocations
s390/kexec_file: print some more error messages
Linus Torvalds [Wed, 15 Dec 2021 18:46:03 +0000 (10:46 -0800)]
Merge tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fix from Wei Liu:
"Build fix from Randy Dunlap"
* tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
Paul Moore [Thu, 9 Dec 2021 16:46:07 +0000 (11:46 -0500)]
audit: improve robustness of the audit queue handling
If the audit daemon were ever to get stuck in a stopped state the
kernel's kauditd_thread() could get blocked attempting to send audit
records to the userspace audit daemon. With the kernel thread
blocked it is possible that the audit queue could grow unbounded as
certain audit record generating events must be exempt from the queue
limits else the system enter a deadlock state.
This patch resolves this problem by lowering the kernel thread's
socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks
the kauditd_send_queue() function to better manage the various audit
queues when connection problems occur between the kernel and the
audit daemon. With this patch, the backlog may temporarily grow
beyond the defined limits when the audit daemon is stopped and the
system is under heavy audit pressure, but kauditd_thread() will
continue to make progress and drain the queues as it would for other
connection problems. For example, with the audit daemon put into a
stopped state and the system configured to audit every syscall it
was still possible to shutdown the system without a kernel panic,
deadlock, etc.; granted, the system was slow to shutdown but that is
to be expected given the extreme pressure of recording every syscall.
The timeout value of HZ/10 was chosen primarily through
experimentation and this developer's "gut feeling". There is likely
no one perfect value, but as this scenario is limited in scope (root
privileges would be needed to send SIGSTOP to the audit daemon), it
is likely not worth exposing this as a tunable at present. This can
always be done at a later date if it proves necessary.
Cc: stable@vger.kernel.org Fixes: ceee30414e577 ("audit: fix auditd/kernel connection state tracking") Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com> Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
soc/tegra: fuse: Fix bitwise vs. logical OR warning
A new warning in clang points out two instances where boolean
expressions are being used with a bitwise OR instead of logical OR:
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
reg = tegra_fuse_read_spare(i) |
^~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning
2 warnings generated.
The motivation for the warning is that logical operations short circuit
while bitwise operations do not.
In this instance, tegra_fuse_read_spare() is not semantically returning
a boolean, it is returning a bit value. Use u32 for its return type so
that it can be used with either bitwise or boolean operators without any
warnings.
Fixes: 6f5f50b9e8aa ("ARM: tegra: Add speedo-based process identification") Link: https://github.com/ClangBuiltLinux/linux/issues/1488 Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
Daniel Borkmann [Mon, 13 Dec 2021 22:25:23 +0000 (22:25 +0000)]
bpf, selftests: Update test case for atomic cmpxchg on r0 with pointer
Fix up unprivileged test case results for 'Dest pointer in r0' verifier tests
given they now need to reject R0 containing a pointer value, and add a couple
of new related ones with 32bit cmpxchg as well.
root@foo:~/bpf/tools/testing/selftests/bpf# ./test_verifier
#0/u invalid and of negative number OK
#0/p invalid and of negative number OK
[...]
#1268/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK
#1269/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK
#1270/p XDP pkt read, pkt_data <= pkt_meta', good access OK
#1271/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#1272/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1900 PASSED, 0 SKIPPED, 0 FAILED
Given a BPF insn can only have two registers (dst, src), the R0 is fixed and
used as an auxilliary register for input (old value) as well as output (returning
old value from memory location). While the verifier performs a number of safety
checks, it misses to reject unprivileged programs where R0 contains a pointer as
old value.
Through brute-forcing it takes about ~16sec on my machine to leak a kernel pointer
with BPF_CMPXCHG. The PoC is basically probing for kernel addresses by storing the
guessed address into the map slot as a scalar, and using the map value pointer as
R0 while SRC_REG has a canary value to detect a matching address.
Fix it by checking R0 for pointers, and reject if that's the case for unprivileged
programs.
Daniel Borkmann [Tue, 7 Dec 2021 10:07:04 +0000 (10:07 +0000)]
bpf, selftests: Add test case for atomic fetch on spilled pointer
Test whether unprivileged would be able to leak the spilled pointer either
by exporting the returned value from the atomic{32,64} operation or by reading
and exporting the value from the stack after the atomic operation took place.
Note that for unprivileged, the below atomic cmpxchg test case named "Dest
pointer in r0 - succeed" is failing. The reason is that in the dst memory
location (r10 -8) there is the spilled register r10:
Daniel Borkmann [Tue, 7 Dec 2021 12:51:56 +0000 (12:51 +0000)]
bpf: Fix kernel address leakage in atomic fetch
The change in commit f33f93ce3900 ("bpf: Propagate stack bounds to registers
in atomics w/ BPF_FETCH") around check_mem_access() handling is buggy since
this would allow for unprivileged users to leak kernel pointers. For example,
an atomic fetch/and with -1 on a stack destination which holds a spilled
pointer will migrate the spilled register type into a scalar, which can then
be exported out of the program (since scalar != pointer) by dumping it into
a map value.
The original implementation of XADD was preventing this situation by using
a double call to check_mem_access() one with BPF_READ and a subsequent one
with BPF_WRITE, in both cases passing -1 as a placeholder value instead of
register as per XADD semantics since it didn't contain a value fetch. The
BPF_READ also included a check in check_stack_read_fixed_off() which rejects
the program if the stack slot is of __is_pointer_value() if dst_regno < 0.
The latter is to distinguish whether we're dealing with a regular stack spill/
fill or some arithmetical operation which is disallowed on non-scalars, see
also 071755280b8a ("bpf: Forbid XADD on spilled pointers for unprivileged
users") for more context on check_mem_access() and its handling of placeholder
value -1.
One minimally intrusive option to fix the leak is for the BPF_FETCH case to
initially check the BPF_READ case via check_mem_access() with -1 as register,
followed by the actual load case with non-negative load_reg to propagate
stack bounds to registers.
Fixes: f33f93ce3900 ("bpf: Propagate stack bounds to registers in atomics w/ BPF_FETCH") Reported-by: <n4ke4mry@gmail.com> Acked-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
====================
mptcp: Fixes for ULP, a deadlock, and netlink docs
Two of the MPTCP fixes in this set are related to the TCP_ULP socket
option with MPTCP sockets operating in "fallback" mode (the connection
has reverted to regular TCP). The other issues are an observed deadlock
and missing parameter documentation in the MPTCP netlink API.
Patch 1 marks TCP_ULP as unsupported earlier in MPTCP setsockopt code,
so the fallback code path in the MPTCP layer does not pass the TCP_ULP
option down to the subflow TCP socket.
Patch 2 makes sure a TCP fallback socket returned to userspace by
accept()ing on a MPTCP listening socket does not allow use of the
"mptcp" TCP_ULP type. That ULP is intended only for use by in-kernel
MPTCP subflows.
Patch 3 fixes the possible deadlock when sending data and there are
socket option changes to sync to the subflows.
Patch 4 makes sure all MPTCP netlink event parameters are documented
in the MPTCP uapi header.
====================
Maxim Galaganov [Tue, 14 Dec 2021 23:16:03 +0000 (15:16 -0800)]
mptcp: fix deadlock in __mptcp_push_pending()
__mptcp_push_pending() may call mptcp_flush_join_list() with subflow
socket lock held. If such call hits mptcp_sockopt_sync_all() then
subsequently __mptcp_sockopt_sync() could try to lock the subflow
socket for itself, causing a deadlock.
Fix the issue by using __mptcp_flush_join_list() instead of plain
mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by
Florian. The sockopt sync will be deferred to the workqueue.
Fixes: 581d3c63be8a ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/244 Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Maxim Galaganov <max@internet.ru> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal [Tue, 14 Dec 2021 23:16:02 +0000 (15:16 -0800)]
mptcp: clear 'kern' flag from fallback sockets
The mptcp ULP extension relies on sk->sk_sock_kern being set correctly:
It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from
working for plain tcp sockets (any userspace-exposed socket).
But in case of fallback, accept() can return a plain tcp sk.
In such case, sk is still tagged as 'kernel' and setsockopt will work.
This will crash the kernel, The subflow extension has a NULL ctx->conn
mptcp socket:
BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0
Call Trace:
tcp_data_ready+0xf8/0x370
[..]
Fixes: e16f0c73e49e ("mptcp: Create SUBFLOW socket for incoming connections") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karol Kolacinski [Tue, 16 Nov 2021 12:07:14 +0000 (13:07 +0100)]
ice: Don't put stale timestamps in the skb
The driver has to check if it does not accidentally put the timestamp in
the SKB before previous timestamp gets overwritten.
Timestamp values in the PHY are read only and do not get cleared except
at hardware reset or when a new timestamp value is captured.
The cached_tstamp field is used to detect the case where a new timestamp
has not yet been captured, ensuring that we avoid sending stale
timestamp data to the stack.
Fixes: fd28ad3fe698 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change the division in ice_ptp_adjfine from div_u64 to div64_u64.
div_u64 is used when the divisor is 32 bit but in this case incval is
64 bit and it caused incorrect calculations and incval adjustments.
Fixes: 6e97854adf8d ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The commit referenced below added fixup_map_timer support (to create a
BPF map containing timers), but failed to increase the size of the
map_fds array, leading to out of bounds write. Fix this by changing
MAX_NR_MAPS to 22.
Magnus Karlsson [Tue, 14 Dec 2021 10:26:07 +0000 (11:26 +0100)]
xsk: Do not sleep in poll() when need_wakeup set
Do not sleep in poll() when the need_wakeup flag is set. When this
flag is set, the application needs to explicitly wake up the driver
with a syscall (poll, recvmsg, sendmsg, etc.) to guarantee that Rx
and/or Tx processing will be processed promptly. But the current code
in poll(), sleeps first then wakes up the driver. This means that no
driver processing will occur (baring any interrupts) until the timeout
has expired.
Fix this by checking the need_wakeup flag first and if set, wake the
driver and return to the application. Only if need_wakeup is not set
should the process sleep if there is a timeout set in the poll() call.
Fixes: c4f9ea350d2c ("xsk: add support for need_wakeup flag in AF_XDP rings") Reported-by: Keith Wiles <keith.wiles@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20211214102607.7677-1-magnus.karlsson@gmail.com
Danielle Ratson [Tue, 14 Dec 2021 10:21:37 +0000 (12:21 +0200)]
selftests: mlxsw: Add a test case for MAC profiles consolidation
Add a test case to cover the bug fixed by the previous patch.
Edit the MAC address of one netdev so that it matches the MAC address of
the second netdev. Verify that the two MAC profiles were consolidated by
testing that the MAC profiles occupancy decreased by one.
Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Tue, 14 Dec 2021 10:21:36 +0000 (12:21 +0200)]
mlxsw: spectrum_router: Consolidate MAC profiles when possible
Currently, when setting a router interface (RIF) MAC address while the
MAC profile is not shared with other RIFs, the profile is edited so that
the new MAC address is assigned to it.
This does not take into account a situation in which the new MAC address
already matches an existing MAC profile. In that situation, two MAC
profiles will be occupied even though they hold MAC addresses from the
same profile.
In order to prevent that, add a check to ensure that editing a MAC
profile takes place only when the new MAC address does not match an
existing profile.
Fixes: 9bba70d9958b6 ("mlxsw: spectrum_router: Add RIF MAC profiles support") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Tested-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 14 Dec 2021 12:47:22 +0000 (12:47 +0000)]
Merge tag 'mac80211-for-net-2021-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A fairly large number of fixes this time:
* fix a station info memory leak on insert collisions
* a rate control fix for retransmissions
* two aggregation setup fixes
* reload current regdomain when reloading database
* a locking fix in regulatory work
* a probe request allocation size fix in mac80211
* apply TCP vs. aggregation (sk pacing) on mesh
* fix ordering of channel context update vs. station
state
* set up skb->dev for mesh forwarding properly
* track QoS data frames only for admission control to
avoid out-of-bounds read (found by syzbot)
* validate extended element ID vs. existing data to
avoid out-of-bounds read (found by syzbot)
* fix locking in mac80211 aggregation TX setup
* fix traffic stall after HW restart when TXQs are used
* fix ordering of reconfig/restart after HW restart
* fix interface type for extended aggregation capability
lookup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Baowen Zheng [Mon, 13 Dec 2021 14:46:04 +0000 (15:46 +0100)]
flow_offload: return EOPNOTSUPP for the unsupported mpls action type
We need to return EOPNOTSUPP for the unsupported mpls action type when
setup the flow action.
In the original implement, we will return 0 for the unsupported mpls
action type, actually we do not setup it and the following actions
to the flow action entry.
Fixes: bc5052d8e47f ("net: sched: take rtnl lock in tc_setup_flow_action()") Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The above issue is due to previous incorrect implementation of
tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule()
to get struct flow_rule *rule which is no longer valid for tc filter
delete operation.
So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for
earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(),
this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload
record for 'RX frame steering' tc flower, currently used for VLAN
priority. The implementation has taken consideration for future extension
to include other type RX frame steering such as EtherType based.
v2:
- Clean up overly extensive backtrace and rewrite git message to better
explain the kernel NULL pointer issue.
Fixes: d7b533788066 ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 29 Nov 2021 13:32:40 +0000 (15:32 +0200)]
mac80211: do drv_reconfig_complete() before restarting all
When we reconfigure, the driver might do some things to complete
the reconfiguration. It's strange and could be broken in some
cases because we restart other works (e.g. remain-on-channel and
TX) before this happens, yet only start queues later.
Change this to do the reconfig complete when reconfiguration is
actually complete, not when we've already started doing other
things again.
For iwlwifi, this should fix a race where the reconfig can race
with TX, for ath10k and ath11k that also use this it won't make
a difference because they just start queues there, and mac80211
also stopped the queues and will restart them later as before.
Johannes Berg [Mon, 29 Nov 2021 13:32:39 +0000 (15:32 +0200)]
mac80211: mark TX-during-stop for TX in in_reconfig
Mark TXQs as having seen transmit while they were stopped if
we bail out of drv_wake_tx_queue() due to reconfig, so that
the queue wake after this will make them catch up. This is
particularly necessary for when TXQs are used for management
packets since those TXQs won't see a lot of traffic that'd
make them catch up later.
mac80211: update channel context before station state
Currently channel context is updated only after station got an update about
new assoc state, this results in station using the old channel context.
Fix this by moving the update channel context before updating station,
enabling the driver to immediately use the updated channel context in
the new assoc state.
Johannes Berg [Mon, 29 Nov 2021 13:32:46 +0000 (15:32 +0200)]
mac80211: fix lookup when adding AddBA extension element
We should be doing the HE capabilities lookup based on the full
interface type so if P2P doesn't have HE but client has it doesn't
get confused. Fix that.
Ilan Peer [Thu, 2 Dec 2021 13:28:54 +0000 (15:28 +0200)]
cfg80211: Acquire wiphy mutex on regulatory work
The function cfg80211_reg_can_beacon_relax() expects wiphy
mutex to be held when it is being called. However, when
reg_leave_invalid_chans() is called the mutex is not held.
Fix it by acquiring the lock before calling the function.
Johannes Berg [Thu, 2 Dec 2021 13:26:25 +0000 (15:26 +0200)]
mac80211: agg-tx: don't schedule_and_wake_txq() under sta->lock
When we call ieee80211_agg_start_txq(), that will in turn call
schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb()
this is done under sta->lock, which leads to certain circular
lock dependencies, as reported by Chris Murphy:
https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com
In general, ieee80211_agg_start_txq() is usually not called
with sta->lock held, only in this one place. But it's always
called with sta->ampdu_mlme.mtx held, and that's therefore
clearly sufficient.
Change ieee80211_stop_tx_ba_cb() to also call it without the
sta->lock held, by factoring it out of ieee80211_remove_tid_tx()
(which is only called in this one place).
This breaks the locking chain and makes it less likely that
we'll have similar locking chain problems in the future.
Finn Behrens [Wed, 1 Dec 2021 12:49:18 +0000 (13:49 +0100)]
nl80211: remove reload flag from regulatory_request
This removes the previously unused reload flag, which was introduced in 7c96fb8e4ff0.
The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed
unconditionally.
Felix Fietkau [Thu, 2 Dec 2021 12:45:33 +0000 (13:45 +0100)]
mac80211: send ADDBA requests using the tid/queue of the aggregation session
Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.
Paolo Abeni [Sat, 11 Dec 2021 16:11:12 +0000 (17:11 +0100)]
mptcp: never allow the PM to close a listener subflow
Currently, when deleting an endpoint the netlink PM treverses
all the local MPTCP sockets, regardless of their status.
If an MPTCP listener socket is bound to the IP matching the
delete endpoint, the listener TCP socket will be closed.
That is unexpected, the PM should only affect data subflows.
Additionally, syzbot was able to trigger a NULL ptr dereference
due to the above:
Linus Torvalds [Mon, 13 Dec 2021 22:34:22 +0000 (14:34 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Misc virtio and vdpa bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa: Consider device id larger than 31
virtio/vsock: fix the transport to work with VMADDR_CID_ANY
virtio_ring: Fix querying of maximum DMA mapping size for virtio device
virtio: always enter drivers/virtio/
vduse: check that offset is within bounds in get_config()
vdpa: check that offsets are within bounds
vduse: fix memory corruption in vduse_dev_ioctl()
Linus Torvalds [Fri, 10 Dec 2021 22:00:15 +0000 (14:00 -0800)]
fget: clarify and improve __fget_files() implementation
Commit f32cd882a0c5 ("fget: check that the fd still exists after getting
a ref to it") fixed a race with getting a reference to a file just as it
was being closed. It was a fairly minimal patch, and I didn't think
re-checking the file pointer lookup would be a measurable overhead,
since it was all right there and cached.
But I was wrong, as pointed out by the kernel test robot.
The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed
quite noticeably. Admittedly it seems to be a very artificial test:
doing "poll()" system calls on regular files in a very tight loop in
multiple threads.
That means that basically all the time is spent just looking up file
descriptors without ever doing anything useful with them (not that doing
'poll()' on a regular file is useful to begin with). And as a result it
shows the extra "re-check fd" cost as a sore thumb.
Happily, the regression is fixable by just writing the code to loook up
the fd to be better and clearer. There's still a cost to verify the
file pointer, but now it's basically in the noise even for that
benchmark that does nothing else - and the code is more understandable
and has better comments too.
[ Side note: this patch is also a classic case of one that looks very
messy with the default greedy Myers diff - it's much more legible with
either the patience of histogram diff algorithm ]
Stefan Assmann [Wed, 1 Dec 2021 08:14:34 +0000 (09:14 +0100)]
iavf: do not override the adapter state in the watchdog task (again)
The watchdog task incorrectly changes the state to __IAVF_RESETTING,
instead of letting the reset task take care of that. This was already
resolved by commit a15f78ea1171 ("iavf: do not override the adapter
state in the watchdog task") but the problem was reintroduced by the
recent code refactoring in commit 5e34a07e771d ("iavf: Refactor iavf
state machine tracking").
Fixes: 5e34a07e771d ("iavf: Refactor iavf state machine tracking") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
projects / kernel.git / log