It is reported that ACPI interrupts do not work any more on
Dell Latitude D600 after commit 8eb6f4a4182c (ACPICA: Save
current masks of enabled GPEs after enable register writes).
The problem turns out to be related to the fact that the
enable_mask and enable_for_run GPE bit masks are not in
sync (in the absence of any system suspend/resume events)
for at least one GPE register on that machine.
Address this problem by writing the enable_for_run mask into
enable_mask as soon as enable_for_run is updated instead of
doing that only after the subsequent register write has
succeeded. For consistency, update acpi_hw_gpe_enable_write()
to store the bit mask to be written into the GPE register
in enable_mask unconditionally before the write.
Since the ACPI_GPE_SAVE_MASK flag is not necessary any more after
that, drop it along with the symbols depending on it.
Reported-and-tested-by: Jim Bos <jim876@xs4all.nl> Fixes: 8eb6f4a4182c (ACPICA: Save current masks of enabled GPEs after enable register writes) Cc: 3.19+ <stable@vger.kernel.org> # 3.19+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
But this commit only resets width/precision/quialifier to fix the reported
issue and doesn't fix other states issues. So now we still can see breakage
in format types and integer bases.
This patch resets format type/base states for local printf to fix this
issue. Lv Zheng.
Linux kernel is not affected by this patch as acpi_ut_vsnprintf() hasn't
been enabled in the kernel.
Link: https://github.com/acpica/acpica/commit/6853da4c Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cleanup of LPIT table output (Dean Nelson)
Split some long lines.
Link: https://github.com/acpica/acpica/commit/330e3b7e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://github.com/acpica/acpica/commit/a2c590ce Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update to latest table definition, which contains major changes.
SLIC table is not used in the Linux kernel.
Link: https://github.com/acpica/acpica/commit/c73195e1 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Updates the dump buffer utility to comment out the ASCII part
of buffer dump. Prevents some tools from getting confused.
Link: https://github.com/acpica/acpica/commit/657dc227 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch removes unused AML_INT_STATICSTRING_OP. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3ec86776 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Windows uses a value of 2, and has no plans to ever change this. So, _REV is
essentially useless for its primary purpose.
Worse, some BIOS vendors have used the difference in _REV values between
Windows and ACPICA to indicate which one is running.
It has been decided by the ACPI community to deprecate this method, and return
1 for ACPI 1.0 (32-bit integers) and 2 for ACPI 2.0 and greater (both 32-bit
and 64-bit integers.
ACPICA is changed to reflect this.
Link: https://github.com/acpica/acpica/commit/7af00219 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://github.com/acpica/acpica/commit/b293f602 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds the basic low-level infrastructure for the External
AML opcode. The interpreter will simply ignore this op, as the op
is intended for use by the disassembler only.
Note that External() opcode is useful for disassembler, interpreter
can simply ignore it and still return exceptions for unknown control
methods so the kernel part only includes the grammar definition of
External() opcode in order to ignore it but doesn't interpret it.
Link: https://github.com/acpica/acpica/commit/d115fe2f Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support to fold expressions with a target operand -- these are
folded and converted to a Store operator:
Add (4, 3, INT1) --> Store (7, INT1)
Also supports ASL+ constructs:
INT1 = 4 + 3 --> Store (7, INT1)
Linux kernel is not affected by this patch.
Link: https://github.com/acpica/acpica/commit/4f9e950d Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For dynamically loaded tables that have unknown ACPI signatures,
this option (-df) forces the disassembler to treat the table as if
it contains valid AML code (like a DSDT or SSDT). Otherwise, the
disassembler will treat the table as an unkown data table and
simply do a hex dump of the table.
Linux kernel is not affected by this patch.
Link: https://github.com/acpica/acpica/commit/f5d2ff3f Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Remove unused variables
- Update to use standard naming/capitalization convention.
Linux kernel is not affected by this patch.
Link: https://github.com/acpica/acpica/commit/f65d0e5b Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Change global #ifdef to check for ACPI_DEBUGGER only.
- Cleanup some long lines and misaligned code.
Link: https://github.com/acpica/acpica/commit/184f3cc4 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://github.com/acpica/acpica/commit/84f3569d Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update for some recent changes, detected by MSVC and FreeBSD builds.
Link: https://github.com/acpica/acpica/commit/46dc081e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some conditional compilation definitions are wrong across header and source
files. This patch corrects them for the resources component.
NOTE that a further patch in this patchset cleans up all ACPI_EXEC_APP,
converting them into ACPI_DEBUGGER, including part of this change.
Link: https://github.com/acpica/acpica/commit/f92a0851 Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some conditional compilation definitions are wrong across header and source
files. This patch corrects them for the utilities component.
Link: https://github.com/acpica/acpica/commit/9a5982af Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_tb_store_table() implements a logic that is only correct to iasl. So it
won't be used by any other utilities except iasl. This function is
complained by the kernel users as an unused function. The best choice to
stop releasing it to the Linux kernel should be moving it to adisasm.c.
ACPI table manager can use both struct acpi_table_desc (direct referencing)
and table index (indirect referencing) as the descriptor to the table, so
acpi_tb_get_next_root_index() is extended to return both of them to allow
maximum usability from the callers. NOTE that indirect referencing is a
design result to meet the boot stage static allocation requirement for the
table descriptors.
This is a linuxized acpi_tb_store_table() removing result, there should be
no functional changes introduced to the Linux kernel by this patch except
the additonal kernel unused argument for acpi_tb_get_next_root_index()
(renamed to acpi_tb_get_next_root_index()). This argument is used in the
ACPICA upstream.
Link: https://github.com/acpica/acpica/commit/6eb364d7 Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove the function acpi_ut_create_pkg_state_and_push() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Link: https://github.com/acpica/acpica/commit/2a9ebd97 Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The macro __DATE__ and friends is not allowed in the Linux kernel. Also,
including the build time in output doesn't seem to provide any value.
Link: https://github.com/acpica/acpica/commit/3d9fb6d1 Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a facility in Linux, developers can obtain GPE and fixed event
status via /sys/firmware/interrupts/. This is implemented using
acpi_get_event_status() and acpi_get_gpe_status(). Recently while debugging some
GPE race issues, it is found that the facility is lacking in the ability to
obtain real hardware register values, the confusing information makes
debugging difficult.
This patch modifies acpi_get_gpe_status() to return EN register values to fix
this gap. Then flags returned from acpi_get_event_status() and
acpi_get_gpe_status() are also cleaned up to reflect this change.
The old ACPI_EVENT_FLAG_SET is carefully kept to avoid regressions. It can
be deleted after we can make sure all its references are removed from OSPM
code. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/e25d791e Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI_MTX_TABLES is acquired and released by the callers of
acpi_tb_install_standard_table() so releasing it in the function itself is
causing the following error in Linux kernel if the table is reloaded:
ACPI Error: Mutex [0x2] is not acquired, cannot release (20141107/utmutex-321)
Call Trace:
[<ffffffff81b0bd48>] dump_stack+0x4f/0x7b
[<ffffffff81546bf5>] acpi_ut_release_mutex+0x47/0x67
[<ffffffff81544357>] acpi_load_table+0x73/0xcb
Link: https://github.com/acpica/acpica/commit/c70434d4 Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that on a physically 64-bit addressed machine, 32-bit kernel
can trigger crashes in accessing the memory regions that are beyond the
32-bit boundary. The region field's start address should still be 32-bit
compliant, but after a calculation (adding some offsets), it may exceed the
32-bit boundary. This case is rare and buggy, but there are real BIOSes
leaked with such issues (see References below).
This patch fixes this gap by always defining IO addresses as 64-bit, and
allows OSPMs to optimize it for a real 32-bit machine to reduce the size of
the internal objects.
Internal acpi_physical_address usages in the structures that can be fixed
by this change include:
1. struct acpi_object_region:
acpi_physical_address address;
2. struct acpi_address_range:
acpi_physical_address start_address;
acpi_physical_address end_address;
3. struct acpi_mem_space_context;
acpi_physical_address address;
4. struct acpi_table_desc
acpi_physical_address address;
See known issues 1 for other usages.
Note that acpi_io_address which is used for ACPI_PROCESSOR may also suffer
from same problem, so this patch changes it accordingly.
For iasl, it will enforce acpi_physical_address as 32-bit to generate
32-bit OSPM compatible tables on 32-bit platforms, we need to define
ACPI_32BIT_PHYSICAL_ADDRESS for it in acenv.h.
Known issues:
1. Cleanup of mapped virtual address
In struct acpi_mem_space_context, acpi_physical_address is used as a virtual
address:
acpi_physical_address mapped_physical_address;
It is better to introduce acpi_virtual_address or use acpi_size instead.
This patch doesn't make such a change. Because this should be done along
with a change to acpi_os_map_memory()/acpi_os_unmap_memory().
There should be no functional problem to leave this unchanged except
that only this structure is enlarged unexpectedly.
Link: https://github.com/acpica/acpica/commit/aacf863c
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=87971
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=79501 Reported-and-tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Reported-and-tested-by: Sial Nije <sialnije@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use 0x%8.8X%8.8X instead of ACPI_PRINTF_UINT
and ACPI_FORMAT_UINT64() instead of
ACPI_FORMAT_NATIVE_UINT()/ACPI_FORMAT_TO_UINT().
This patch also removes above replaced macros as there are no users.
This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.
Link: https://github.com/acpica/acpica/commit/b6061237 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For physical addresses, since the address may exceed 32-bit address range
after calculation, we should use %8.8X%8.8X (see ACPI_FORMAT_UINT64()) to
convert the %p formats.
This is a preparation to switch acpi_physical_address to 64-bit on 32-bit
kernel builds.
Link: https://github.com/acpica/acpica/commit/7f06739d Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are code pieces converting pointers using "(acpi_physical_address) x"
or "ACPI_CAST_PTR (t, x)" formats, this patch cleans up them.
Known issues:
1. Cleanup of "(ACPI_PHYSICAL_ADDRRESS) x" for a table field
For the conversions around the table fields, it is better to fix it with
alignment also fixed. So this patch doesn't modify such code. There
should be no functional problem by leaving them unchanged.
Link: https://github.com/acpica/acpica/commit/154f6d07 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The conversion converts an acpi_physical_address to acpi_physical_address,
this patch thus removes such useless conversion.
Link: https://github.com/acpica/acpica/commit/c3279864 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The offset calculation needn't convert a pointer to a special integer type.
So this patch uses ACPI_TO_INTEGER() instead.
This patch only affects acpidump tool.
Link: https://github.com/acpica/acpica/commit/9e2d8180 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
OSPMs like Linux expect an acpi_physical_address returning value from
acpi_find_root_pointer(). This triggers warnings if sizeof (acpi_size) doesn't
equal to sizeof (acpi_physical_address):
drivers/acpi/osl.c:275:3: warning: passing argument 1 of 'acpi_find_root_pointer' from incompatible pointer type [enabled by default]
In file included from include/acpi/acpi.h:64:0,
from include/linux/acpi.h:36,
from drivers/acpi/osl.c:41:
include/acpi/acpixf.h:433:1: note: expected 'acpi_size *' but argument is of type 'acpi_physical_address *'
This patch corrects acpi_find_root_pointer().
Link: https://github.com/acpica/acpica/commit/7d9fd643 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA: Linuxize: Reduce divergences for 20150410 release.
This patch reduces source code differences between the Linux kernel and the
ACPICA upstream so that the linuxized ACPICA 20150410 release can be
applied with reduced human intervention.
Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs and fs fixes from Al Viro:
"Several AIO and OCFS2 fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ocfs2: _really_ sync the right range
ocfs2_file_write_iter: keep return value and current position update in sync
[regression] ocfs2: do *not* increment ->ki_pos twice
ioctx_alloc(): fix vma (and file) leak on failure
fix mremap() vs. ioctx_kill() race
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull last minute thermal-SoC management fixes from Eduardo Valentin:
"Specifics:
- Minor fixes on ST and RCAR thermal drivers.
- Avoid flooding kernel log when driver returns -EAGAIN.
Note: I am sending this pull on Rui's behalf while he fixes issues in
his Linux box"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
drivers: thermal: st: remove several sparse warnings
thermal: constify of_device_id array
thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN
thermal: rcar: Fix typo in r8a73a4 SoC name
Merge tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound
Pull last-minute ASoC fix from Mark Brown:
"This patch backs out a change that came in during the merge window
which selects a configuration for GPIO4 on pcm512x CODECs that may not
be suitable for all systems using the device. Changes for v4.1 will
make this properly configurable but for now it's safest to revert to
the v3.19 behaviour and leave the pin configuration alone.
Sorry for sending this direct at the last minute but due to the GPIO
misuse it'd be really good to get it in the release and I'd not
realised it hadn't been sent yet - between some travel, a job change
and other non-urgent fixes coming in I'd lost track of the urgency.
It's been in -next for several weeks now, is isolated to the driver
and fairly clear to inspection"
* tag 'asoc-fix-v4.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Howard Mitchell [Mon, 23 Mar 2015 21:17:01 +0000 (21:17 +0000)]
ASoC: pcm512x: Remove hardcoding of pll-lock to GPIO4
Currently GPIO4 is hardcoded to output the pll-lock signal.
Unfortunately this is after the pll-out GPIO is configured which
is selectable in the device tree. Therefore it is not possible to
use GPIO4 for pll-out. Therefore this patch removes the
configuration of GPIO4.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
It added a new warning to try to encourage driver writers to set the
device capabities properly, but drivers haven't been updated and in the
meantime it just generaters a scary message that users cannot actually
do anything about.
Warnings like these are appropriate if you actually expect to fix the
code that causes them. They are not appropriate for releases.
Requested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
blk-mq: initialize 'struct request' and associated data to zero
Jan Engelhardt reports a strange oops with an invalid ->sense_buffer
pointer in scsi_init_cmd_errh() with the blk-mq code.
The sense_buffer pointer should have been initialized by the call to
scsi_init_request() from blk_mq_init_rq_map(), but there seems to be
some non-repeatable memory corruptor.
This patch makes sure we initialize the whole struct request allocation
(and the associated 'struct scsi_cmnd' for the SCSI case) to zero, by
using __GFP_ZERO in the allocation. The old code initialized a couple
of individual fields, leaving the rest undefined (although many of them
are then initialized in later phases, like blk_mq_rq_ctx_init() etc.
It's not entirely clear why this matters, but it's the rigth thing to do
regardless, and with 4.0 imminent this is the defensive "let's just make
sure everything is initialized properly" patch.
Merge tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull late ipmi fixes from Corey Minyard:
"Some annoying issues in the IPMI driver that would be good to have
fixed before 4.0 is released.
These got reported or discovered late, but they will avoid some
situations that would cause lots of log spam and in one case a
deadlock"
* tag 'for-linus-4.0-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi_ssif: Use interruptible completion for waiting in the thread
ipmi/powernv: Fix minor locking bug
ipmi: Handle BMCs that don't allow clearing the rcv irq bit
If ipmi_powernv_recv(...) is called without a current message it
prints a warning and returns. However it fails to release the message
lock causing the system to dead lock during any subsequent IPMI
operations.
This error path should never normally be taken unless there are bugs
elsewhere in the system.
ipmi: Handle BMCs that don't allow clearing the rcv irq bit
Some BMCs don't let you clear the receive irq bit in the global
enables. This is kind of silly, but they give an error if you
try to clear it. Compensate for this by detecting the situation
and working around it.
Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Thomas D <whissi@whissi.de> Reviewed-by: Thomas D <whissi@whissi.de>
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is our remaining set of three fixes for 4.0: two oops fixes(one
for cable pulls triggering oopses and the other be2iscsi specific) and
one warn on in sysfs on multipath devices using enclosures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Defer processing of REQ_PREEMPT requests for blocked devices
be2iscsi: Fix kernel panic when device initialization fails
enclosure: fix WARN_ON removing an adapter in multi-path devices
Pull SCSI target fixes from Nicholas Bellinger:
"Just a few small fixes:
Two from Andy, the first addresses a v4.0 target specific regression
to a user visible configfs attribute, and the second adds a set of
missing brackets around IPv6 discovery portal information within
iscsi-target.
And one from Mike that fixes an OOPs regression in traditional
iscsi-target when an iovec allocation fails, that has been present
since v3.10.y code. (CC'd to stable)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi target: fix oops when adding reject pdu
iscsi-target: TargetAddress in SendTargets should bracket ipv6 addresses
target: Allow userspace to write 1 to attrib/emulate_fua_write
Mike Christie [Fri, 10 Apr 2015 07:47:27 +0000 (02:47 -0500)]
iscsi target: fix oops when adding reject pdu
This fixes a oops due to a double list add when adding a reject PDU for
iscsit_allocate_iovecs allocation failures. The cmd has already been
added to the conn_cmd_list in iscsit_setup_scsi_cmd, so this has us call
iscsit_reject_cmd.
Note that for ERL0 the reject PDU is not actually sent, so this patch
is not completely tested. Just verified we do not oops. The problem is the
add reject functions return -1 which is returned all the way up to
iscsi_target_rx_thread which for ERL0 will drop the connection.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Merge tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are fixes gathered for 4.0-final; one FireFire endian fix, two
USB-audio quirks, and three HD-audio quirks.
All relatively small and device-specific fixes, should be pretty safe
to apply"
* tag 'sound-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
ALSA: hda - Fix headphone pin config for Lifebook T731
ALSA: bebob: fix to processing in big-endian machine for sending cue
ALSA: hda/realtek - Make more stable to get pin sense for ALC283
ALSA: usb-audio: don't try to get Benchmark DAC1 sample rate
ALSA: hda/realtek - Support Dell headset mode for ALC256
nios2: fix cache coherency issue when debug with gdb
Remove the end address checking for flushda function. We need to flush
each address line for flushda instruction, from start to end address.
This is because flushda instruction only flush the cache if tag and line
fields are matched.
Change to use ldwio instruction (bypass cache) to load the instruction
that causing trap. Our interest is the actual instruction that executed
by the processor, this should be uncached.
Note, EA address might be an userspace cached address.
Merge tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are stable-candidate fixes of some recently reported issues in
the cpufreq core, cpuidle core, the ACPI cpuidle driver and the
hibernate core.
Specifics:
- Revert a 3.17 hibernate commit that was supposed to fix an issue
related to e820 reserved regions, but broke resume from hibernation
on Lenovo x230 (Rafael J Wysocki).
- Prevent the ACPI cpuidle driver from overwriting the name and
description of the C0 state set by the core when the list of
C-states changes (Thomas Schlichter).
- Remove the no longer needed state_count field from struct
cpuidle_device which prevents the list of C-states shown by the
sysfs interface from becoming incorrect when the current number of
them is different from the number of C-states on boot (Bartlomiej
Zolnierkiewicz).
- The cpufreq core updates the policy object of the only online CPU
during system resume to make it reflect the current hardware state,
but it always assumes that CPU to be CPU0 which need not be the
case, so fix the code to avoid that assumption (Viresh Kumar)"
* tag 'pm+acpi-4.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PM / hibernate: avoid unsafe pages in e820 reserved regions"
cpuidle: ACPI: do not overwrite name and description of C0
cpuidle: remove state_count field from struct cpuidle_device
cpufreq: Schedule work for the first-online CPU on resume
Merge tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Here are some fixes for v4.0. I apologize for how late they are. We
were hoping for some better fixes, but couldn't get them polished in
time. These fix:
- a Xen domU oops with PCI passthrough devices
- a sparc T5 boot failure
- a STM SPEAr13xx crash (use after initdata freed)
- a cpcihp hotplug driver thinko
- an AER thinko that printed stack junk
Details:
Enumeration
- Don't look for ACPI hotplug parameters if ACPI is disabled (Bjorn Helgaas)
Resource management
- Revert "sparc/PCI: Clip bridge windows to fit in upstream windows" (Bjorn Helgaas)
AER
- Avoid info leak in __print_tlp_header() (Rasmus Villemoes)
ST Microelectronics SPEAr13xx host bridge driver
- Drop __initdata from spear13xx_pcie_driver (Matwey V. Kornilov)
* tag 'pci-v4.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "sparc/PCI: Clip bridge windows to fit in upstream windows"
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
PCI: cpcihp: Add missing curly braces in cpci_configure_slot()
PCI/AER: Avoid info leak in __print_tlp_header()
PCI: spear: Drop __initdata from spear13xx_pcie_driver
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
Adds an entry for Creative USB X-Fi to the rc_config array in
mixer_quirks.c to allow use of volume knob on the device.
Adds support for newer X-Fi Pro card, known as "Model No. SB1095"
with USB ID "041e:3237"
Al Viro [Wed, 8 Apr 2015 21:00:32 +0000 (17:00 -0400)]
ocfs2: _really_ sync the right range
"ocfs2 syncs the wrong range" had been broken; prior to it the
code was doing the wrong thing in case of O_APPEND, all right,
but _after_ it we were syncing the wrong range in 100% cases.
*ppos, aka iocb->ki_pos is incremented prior to that point,
so we are always doing sync on the area _after_ the one we'd
written to.
Spotted by Joseph Qi <joseph.qi@huawei.com> back in January;
unfortunately, I'd missed his mail back then ;-/
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Final drm fixes: one core locking imbalance regression, and a bunch of
i915 baytrail s/r fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm: fix drm_mode_getconnector() locking imbalance regression
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915/chv: Remove Wait for a previous gfx force-off
drm/i915/vlv: save/restore the power context base reg
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph revert from Sage Weil:
"This corrects a recent misadventure with __GFP_MEMALLOC and
PF_MEMALLOC; it turns out it's not a good fit for RBD and we're better
off relying on dirty page throttling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
Revert "libceph: use memalloc flags for net IO"
Merge misc fixes from Andrew Morton:
"Three fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: numa: disable change protection for vma(VM_HUGETLB)
include/linux/dmapool.h: declare struct device
mm: move zone lock to a different cache line than order-0 free page lists
Copy the kernel module data from user space in chunks
Unlike most (all?) other copies from user space, kernel module loading
is almost unlimited in size. So we do a potentially huge
"copy_from_user()" when we copy the module data from user space to the
kernel buffer, which can be a latency concern when preemption is
disabled (or voluntary).
Also, because 'copy_from_user()' clears the tail of the kernel buffer on
failures, even a *failed* copy can end up wasting a lot of time.
Normally neither of these are concerns in real life, but they do trigger
when doing stress-testing with trinity. Running in a VM seems to add
its own overheadm causing trinity module load testing to even trigger
the watchdog.
The simple fix is to just chunk up the module loading, so that it never
tries to copy insanely big areas in one go. That bounds the latency,
and also the amount of (unnecessarily, in this case) cleared memory for
the failure case.
The rule for 'copy_from_user()' is that it zeroes the remaining kernel
buffer even when the copy fails halfway, just to make sure that we don't
leave uninitialized kernel memory around. Because even if we check for
errors, some kernel buffers stay around after thge copy (think page
cache).
However, the x86-64 logic for user copies uses a copy_user_generic()
function for all the cases, that set the "zerorest" flag for any fault
on the source buffer. Which meant that it didn't just try to clear the
kernel buffer after a failure in copy_from_user(), it also tried to
clear the destination user buffer for the "copy_in_user()" case.
Not only is that pointless, it also means that the clearing code has to
worry about the tail clearing taking page faults for the user buffer
case. Which is just stupid, since that case shouldn't happen in the
first place.
Get rid of the whole "zerorest" thing entirely, and instead just check
if the destination is in kernel space or not. And then just use
memset() to clear the tail of the kernel buffer if necessary.
Dave Airlie [Wed, 8 Apr 2015 20:59:50 +0000 (06:59 +1000)]
Merge tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel into drm-fixes
three commits, all cc: stable, to address Baytrail
suspend/resume issues.
* tag 'drm-intel-fixes-2015-04-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915/vlv: remove wait for previous GFX clk disable request
drm/i915/chv: Remove Wait for a previous gfx force-off
drm/i915/vlv: save/restore the power context base reg
ALSA: hda - Fix headphone pin config for Lifebook T731
Some BIOS version of Fujitsu Lifebook T731 seems to set up the
headphone pin (0x21) without the assoc number 0x0f while it's set only
to the output on the docking port (0x1a). With the recent commit
[fea061392e40: ALSA: hda - Fix "PCM" name being used on one DAC when
there are two DACs], this resulted in the weird mixer element
mapping where the headphone on the laptop is assigned as a shared
volume with the speaker and the docking port is assigned as an
individual headphone.
This patch improves the situation by correcting the headphone pin
config to the more appropriate value.
Reported-and-tested-by: Taylor Smock <smocktaylor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Bart Van Assche [Wed, 4 Mar 2015 09:31:47 +0000 (10:31 +0100)]
Defer processing of REQ_PREEMPT requests for blocked devices
SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:
Reported-by: Max Gurtuvoy <maxg@mellanox.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
John Soni Jose [Thu, 12 Feb 2015 01:15:47 +0000 (06:45 +0530)]
be2iscsi: Fix kernel panic when device initialization fails
Kernel panic was happening as iscsi_host_remove() was called on
a host which was not yet added.
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
ALSA: bebob: fix to processing in big-endian machine for sending cue
Some M-Audio devices require to receive bootup command just after
powering on, while codes in BeBoB driver doesn't work properly in
big-endian machine because the command should be aligned by
little-endian.
This commit fixes this bug. This fix should go to stable kernel.
David Ahern reported that 37c6be6b1a77 breaks booting on an 8-socket T5
sparc system. He also verified that the system boots with 37c6be6b1a77
reverted. Yinghai has some fixes, but they need a little more polishing
than we can do before v4.0.
Bjorn Helgaas [Tue, 24 Mar 2015 16:12:45 +0000 (11:12 -0500)]
PCI: Don't look for ACPI hotplug parameters if ACPI is disabled
Booting a v3.18 or newer Xen domU kernel with PCI devices passed through
results in an oops (this is a 32-bit 3.13.11 dom0 with a 64-bit 4.4.0
hypervisor and 32-bit domU):
Don't look for ACPI configuration information if ACPI has been disabled.
I don't think this is the best fix, because we can boot plain Linux (no
Xen) with "acpi=off", and we don't need this check in pci_get_hp_params().
There should be a better fix that would make Xen domU work the same way.
The domU kernel has ACPI support but it has no AML. There should be a way
to initialize the ACPI data structures so things fail gracefully rather
than oopsing. This is an interim fix to address the regression.
Fixes: 5bebc2282dec ("PCI: Add pci_configure_device() during enumeration") Link: https://bugzilla.kernel.org/show_bug.cgi?id=96301 Reported-by: Michael D Labriola <mlabriol@gdeb.com> Tested-by: Michael D Labriola <mlabriol@gdeb.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.18+
Kailang Yang [Wed, 8 Apr 2015 08:34:00 +0000 (16:34 +0800)]
ALSA: hda/realtek - Make more stable to get pin sense for ALC283
Pin sense will active when power pin is wake up.
Power pin will not wake up immediately during resume state.
Add some delay to wait for power pin activated.
Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
drm: Fix deadlock due to getconnector locking changes
If the drm_connector_find() call returns NULL, we should no longer
call drm_modeset_unlock() to avoid locking imbalance.
Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
mm: numa: disable change protection for vma(VM_HUGETLB)
Currently when a process accesses a hugetlb range protected with
PROTNONE, unexpected COWs are triggered, which finally puts the hugetlb
subsystem into a broken/uncontrollable state, where for example
h->resv_huge_pages is subtracted too much and wraps around to a very
large number, and the free hugepage pool is no longer maintainable.
This patch simply stops changing protection for vma(VM_HUGETLB) to fix
the problem. And this also allows us to avoid useless overhead of minor
faults.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Suggested-by: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Tue, 7 Apr 2015 21:26:44 +0000 (14:26 -0700)]
include/linux/dmapool.h: declare struct device
dmapool uses struct device in function arguments but relies on an
implicit inclusion to declare struct device causing warnings in some
configurations:
include/linux/dmapool.h:31:7: warning: 'struct device' declared inside parameter list
Fix this by adding a struct device declaration to the file.
Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: move zone lock to a different cache line than order-0 free page lists
Huang Ying reported the following problem due to commit 9f5793683054 ("mm:
rearrange zone fields into read-only, page alloc, statistics and page
reclaim lines") from the Intel performance tests
The problem is specific to very large machines under stress. It was not
reproducible with the machines I had used to justify the original patch
because large numbers of CPUs are required. When pressure is high enough,
the cache line is bouncing between CPUs trying to acquire the lock and the
holder of the lock adjusting free lists. The intention was that the
acquirer of the lock would automatically have the cache line holding the
free lists but according to Huang, this is not a universal win.
One possibility is to move the zone lock to its own cache line but it
increases the size of the zone. This patch moves the lock to the other
end of the free lists where they do not contend under high pressure. It
does mean the page allocator paths now require more cache lines but Huang
reports that it restores performance to previous levels on large machines
drivers: thermal: st: remove several sparse warnings
Simple patch to make symbols static. Symbols that are not
shared with other parts of the kernel can be made static.
This change also removes several sparse complains.
Cc: Zhang Rui <rui.zhang@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ajit Pal Singh <ajitpal.singh@st.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Hans de Goede [Sat, 21 Mar 2015 14:02:55 +0000 (15:02 +0100)]
thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN
Some temperature sensors only get updated every few seconds and while
waiting for the first irq reporting a (new) temperature to happen there
get_temp operand will return -EAGAIN as it does not have any data to report
yet.
Not logging an error in this case avoids messages like these from showing
up in dmesg on affected systems:
[ 1.219353] thermal thermal_zone0: failed to read out thermal zone 0
[ 2.015433] thermal thermal_zone0: failed to read out thermal zone 0
[ 2.416737] thermal thermal_zone0: failed to read out thermal zone 0
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Dirty page throttling should be sufficient for us in the general case
so there is no need to use __GFP_MEMALLOC - it would be needed only in
the swap-over-rbd case, which we currently don't support. (It would
probably take approximately the commit that is being reverted to add
that support, but we would also need the "swap" option to distinguish
from the general case and make sure swap ceph_client-s aren't shared
with anything else.) See ceph-devel threads [1] and [2] for the
details of why enabling pfmemalloc reserves for all cases is a bad
thing.
On top of potential system lockups related to drained emergency
reserves, this turned out to cause ceph lockups in case peers are on
the same host and communicating via loopback due to sk_filter()
dropping pfmemalloc skbs on the receiving side because the receiving
loopback socket is not tagged with SOCK_MEMALLOC.
[1] "SOCK_MEMALLOC vs loopback"
http://www.spinics.net/lists/ceph-devel/msg22998.html
[2] "[PATCH] libceph: don't set memalloc flags in loopback case"
http://www.spinics.net/lists/ceph-devel/msg23392.html
drm/i915: vlv: factor out vlv_force_gfx_clock and check for pending force-of
but I'm not sure why. It has caused problems for us in the past (see 85250ddff7a6 "drm/i915/chv: Remove Wait for a previous gfx force-off"
and 5af03c3eb9b6 "drm/i915: vlv: increase timeout when forcing on the
GFX clock") and doesn't seem to be required, so let's just drop it.
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org # d533b40803db: drm/i915/chv: Remove Wait ... Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Deepak S [Sat, 28 Mar 2015 09:53:34 +0000 (15:23 +0530)]
drm/i915/chv: Remove Wait for a previous gfx force-off
On CHV, PUNIT team confirmed that 'VLV_GFX_CLK_STATUS_BIT' is not a
sticky bit and it will always be set. So ignore Check for previous
Gfx force off during suspend and allow the force clk as part S0ix
Sequence
Signed-off-by: Deepak S <deepak.s@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm/i915/vlv: save/restore the power context base reg
Some BIOSes (e.g. the one on the Minnowboard) don't save/restore this
reg. If it's unlocked, we can just restore the previous value, and if
it's locked (in case the BIOS re-programmed it for us) the write will be
ignored and we'll still have "did it move" sanity check in the PM code to
warn us if something is still amiss.
References: https://bugs.freedesktop.org/show_bug.cgi?id=89611 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Darren Hart <dvhart@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit bb867832fa51 (PM / hibernate: avoid unsafe pages in e820 reserved
regions) is reported to make resume from hibernation on Lenovo x230
unreliable, so revert it.
We will revisit the issue the commit in question was supposed to fix
in the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96111 Reported-by: rhn <kebuac.rhn@porcupinefactory.org> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1) In TCP, don't register an FRTO for cumulatively ACK'd data that was
previously SACK'd, from Neal Cardwell.
2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup,
from Cong WANG.
3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also
from Cong WANG.
4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel.
5) When we encapsulate for a tunnel device, skb->sk still points to the
user socket. So this leads to cases where we retraverse the
ipv4/ipv6 output path with skb->sk being of some other address
family (f.e. AF_PACKET). This can cause things to crash since the
ipv4 output path is dereferencing an AF_PACKET socket as if it were
an ipv4 one.
The short term fix for 'net' and -stable is to elide these socket
checks once we've entered an encapsulation sequence by testing
xmit_recursion.
Longer term we have a better solution wherein we pass the tunnel's
socket down through the output paths, but that is way too invasive
for 'net' and -stable.
From Hannes Frederic Sowa.
6) l2tp_init() failure path forgets to unregister per-net ops, from
Cong WANG.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
net: dsa: fix filling routing table from OF description
l2tp: unregister l2tp_net_ops on failure path
mvneta: dont call mvneta_adjust_link() manually
ipv6: protect skb->sk accesses from recursive dereference inside the stack
netns: don't allocate an id for dead netns
Revert "netns: don't clear nsid too early on removal"
ip6mr: call del_timer_sync() in ip6mr_free_table()
net: move fib_rules_unregister() under rtnl lock
ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup
tcp: fix FRTO undo on cumulative ACK of SACKed range
xen-netfront: transmit fully GSO-sized packets
Al Viro [Mon, 6 Apr 2015 21:57:44 +0000 (17:57 -0400)]
ioctx_alloc(): fix vma (and file) leak on failure
If we fail past the aio_setup_ring(), we need to destroy the
mapping. We don't need to care about anybody having found ctx,
or added requests to it, since the last failure exit is exactly
the failure to make ctx visible to lookups.
Reproducer (based on one by Joe Mario <jmario@redhat.com>):
Al Viro [Mon, 6 Apr 2015 21:48:54 +0000 (17:48 -0400)]
fix mremap() vs. ioctx_kill() race
teach ->mremap() method to return an error and have it fail for
aio mappings in process of being killed
Note that in case of ->mremap() failure we need to undo move_page_tables()
we'd already done; we could call ->mremap() first, but then the failure of
move_page_tables() would require undoing whatever _successful_ ->mremap()
has done, which would be a lot more headache in general.
net/mlx4_core: Fix error message deprecation for ConnectX-2 cards
Commit 38ee4ef6be62 ("net/mlx4_core: Deprecate error message at
ConnectX-2 cards startup to debug") did the deprecation only for port 1
of the card. Need to deprecate for port 2 as well.
Fixes: 38ee4ef6be62 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: fix filling routing table from OF description
According to description in 'include/net/dsa.h', in cascade switches
configurations where there are more than one interconnected devices,
'rtable' array in 'dsa_chip_data' structure is used to indicate which
port on this switch should be used to send packets to that are destined
for corresponding switch.
However, dsa_of_setup_routing_table() fills 'rtable' with port numbers
of the _target_ switch, but not current one.
This commit removes redundant devicetree parsing and adds needed port
number as a function argument. So dsa_of_setup_routing_table() now just
looks for target switch number by parsing parent of 'link' device node.
To remove possible misunderstandings with the way of determining target
switch number, a corresponding comment was added to the source code and
to the DSA device tree bindings documentation file.
This was tested on a custom board with two Marvell 88E6095 switches with
following corresponding routing tables: { -1, 10 } and { 8, -1 }.
Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Updates for the input subsystem - two more tweaks for ALPS driver to
work out kinks after splitting the touchpad, trackstick, and potential
external PS/2 mouse into separate input devices.
Changes to support ALPS SS4 devices (protocol V8) will be coming in
4.1..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: alps - document stick behavior for protocol V2
Input: alps - report V2 Dualpoint Stick events via the right evdev node
Input: alps - report interleaved bare PS/2 packets via dev3
ipv6: protect skb->sk accesses from recursive dereference inside the stack
We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.
ipv6 does not conform with this in three places:
1) ip6_fragment: we do consult ipv6_npinfo for frag_size
2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
loop the packet back to the local socket
3) ip6_skb_dst_mtu could query the settings from the user socket and
force a wrong MTU
Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.
Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.
Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede [Sat, 4 Apr 2015 00:20:05 +0000 (17:20 -0700)]
Input: alps - report V2 Dualpoint Stick events via the right evdev node
On V2 devices the DualPoint Stick reports bare packets, these should be
reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also
has the INPUT_PROP_POINTING_STICK propbit set.
Note that since there is no way to distinguish these packets from an external
PS/2 mouse (insofar as these laptops have an external PS/2 port) this means
that we will be reporting PS/2 mouse events via this evdev node too, as we've
been doing in kernel 3.19 and older.
This has been tested on a Dell Latitude D620 and a Dell Latitude E6400,
which both have a V2 touchpad + a DualPoint Stick which reports bare packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
projects / kernel.git / log