David S. Miller [Mon, 27 Jan 2020 13:35:40 +0000 (14:35 +0100)]
Merge branch 'qed-Utilize-FW-8.42.2.0'
Michal Kalderon says:
====================
qed*: Utilize FW 8.42.2.0
This FW contains several fixes and features, main ones listed below.
We have taken into consideration past comments on previous FW versions
that were uploaded and tried to separate this one to smaller patches to
ease review.
- RoCE
- SRIOV support
- Fixes in following flows:
- latency optimization flow for inline WQEs
- iwarp OOO packed DDPs flow
- tx-dif workaround calculations flow
- XRC-SRQ exceed cache num
- Debug
- Better handling of extracting data during traffic
- ILT Dump -> dumping host memory used by chip
- MDUMP -> collect debug data on system crash and extract after
reboot
Patches prefixed with FW 8.42.2.0 are required to work with binary
8.42.2.0 FW where as the rest are FW related but do not require the
binary.
Changes from V2
---------------
- Move FW version to the start of the series to maintain minimal compatibility
- Fix some kbuild errors:
- frame size larger than 1024 (Queue Manager patch - remove redundant
field from struct)
- sparse warning on endianity (Dmae patch fix - wrong use of __le32 for field
used only on host, should be u32)
- static should be used for some functions (Debug feature ilt and mdump)
Reported-by: kbuild test robot <lkp@intel.com>
Changes from V1
---------------
- Remove epoch + kernel version from device debug dump
- don't bump driver version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:19 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 debug features
Add to debug dump more information on the platform it was collected
from (pci func, path id).
Provide human readable reg fifo erros.
Removed static debug arrays from HSI Functions, and move them to
the hwfn.
Some structures were slightly changed (removing reserved chip id
for example) which lead to many long initializations being modified
with one parameter less during initialization. This leads to
some long diffs that don't really change anything.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:18 +0000 (15:26 +0200)]
qed: rt init valid initialization changed
The QM phase init tool can be invoked multiple times during
the driver lifetime. Part of the init comes from the runtime array.
The logic for setting the values did not init all values, basically
assuming the runtime array was all zeroes. But if it was invoked
multiple times, nobody was zeroing it after the first time.
In this change we zero the runtime array right after using it.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:17 +0000 (15:26 +0200)]
qed: Debug feature: ilt and mdump
Part of the FW drop includes new debug capabilities implemented in the
qed_debug file. This patch dumps additional information during ethtool -d
for better debugging. The data dumped is the ilt (internal logical table)
and information gathered by the management firmware incase there was a
crash and driver was not able to extract the information (mdump).
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:16 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 Add fw overlay feature
This feature enables the FW to page out FW code when required
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:15 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 HSI changes
This patch contains several HSI changes. The changes are part of
features like RDMA VF and OVS, the patch also contains a fix to
how the init code determines if the dmae is ready to be used.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:14 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 iscsi/fcoe changes
- Remove struct iscsi_slow_path_hdr and field fw_cid from several structs
- Remove struct iscsi_spe_func_dstry
- Remove fields pbe_page_size_log and pbl_page_size_log from struct
iscsi_conn_offload_param
Signed-off-by: Manish Rangankar <manish.rangankar@marvell.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@marvell.com> Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:13 +0000 (15:26 +0200)]
qed: Add abstraction for different hsi values per chip
The number of BTB blocks was modified to be different between the two chip
flavors supported (BB/K2) as a result, this lead to a re-write of selecting
the default hsi value based on the chip.
This patch creates a lookup table for hsi values per chip rather than
ask again and again for every value.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:12 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 Additional ll2 type
LL2 queues were a limited resource due to FW constraints.
This FW introduced a new resource which is a context based ll2 queue
(memory on host). The additional ll2 queues are required for RDMA SRIOV.
The code refers to the previous ll2 queues as ram-based or legacy, and the
new queues as ctx-based.
This change decreased the "legacy" ram-based queues therefore the first ll2
queue used for iWARP was converted to the ctx-based ll2 queue.
This feature also exposed a bug in the DIRECT_REG_WR64 macro implementation
which didn't have an effect in other use cases.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:11 +0000 (15:26 +0200)]
qed: Use dmae to write to widebus registers in fw_funcs
There are several wide-bus registers written to by the fw_funcs
that require using the dmae for atomicity. Therefore using the dmae
channel functionality was added to the fw_funcs file, since the code
is very similar to the previously used code, the structures used were
moved to qed_hsi. Due to FW conventions, the names of the flags in the
struct changed. Since this required slight modification in the places
that set the flags the code was modified to use GET/SET FIELD macros.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:10 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 Parser offsets modified
Convert storm ram line to regpair rather than two distinct u32
to better represent the u64 width of the ram.
Convert some defines to be hex instead of negative values
these values also changed by FW from previous value.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:09 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 Queue Manager changes
This patch contains changes in initialization and usage of the QM blocks.
Instead of setting a rate limiter per vport the rate limiters are now a
global resource and set independentaly.
The patch also contains a field name change:
vport_wfq which is part of vport_params was renamed to wfq as the vport
prefix is redundant.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Mon, 27 Jan 2020 13:26:08 +0000 (15:26 +0200)]
qed: FW 8.42.2.0 Expose new registers and change windows
This patch contains register initialization related changes.
- Modifications to the runtime offsets - these are defines used
by the driver or firmware functions to set values that are used
by the initialization functions to set device register values.
- Global window values changes to provide different device register
ranges.
- Additional device registers addresses were added to the register file,
used in later stages.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
IRO stands for internal RAM offsets. Updating the FW binary produces
different iro offsets. This file contains the different values,
and a new representation of the values.
Update the FW version
Signed-off-by: Ariel Elior <ariel.elior@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
octeontx2-pf: Add network driver for physical function
OcteonTX2 SOC's resource virtualization unit (RVU) supports
multiple physical and virtual functions. Each of the PF's
functionality is determined by what kind of resources are attached
to it. If NPA and NIX blocks are attached to a PF it can function
as a highly capable network device.
This patch series add a network driver for the PF. Initial set of
patches adds mailbox communication with admin function (RVU AF)
and configuration of queues. Followed by Rx and tx pkts NAPI
handler and then support for HW offloads like RSS, TSO, Rxhash etc.
Ethtool support to extract stats, config RSS, queue sizes, queue
count is also added.
Added documentation to give a high level overview of HW and
different drivers which will be upstreamed and how they interact.
Changes from v5:
* Fixed otx2_atomic64_add() non ARM64 fallback definition.
- Suggested by David Miller
Changes from v4:
* Replaced pci_set_dma_mask and pci_set_consistent_dma_mask
fn()s with dma_set_mask_and_coherent().
* Some additonal code cleanup.
* Fixed receive buffer segmnetation logic in otx2_alloc_rbuf()
* Removed all unused BIG_ENDIAN structure definitions.
* Removed unnecessary memory barriers
- Sugested by Jakub Kicinski
* Fixed mailbox initalization failure handling
* Removed unused function parameter in otx2_skb_add_frag()
- Suggested by Maciej Fijalkowski
Changes from v3:
* Fixed receive side scaling reinitialization during interface
DOWN and UP to retain user configured settings, if any.
* Removed driver version from ethtool.
* Fixed otx2_set_rss_hash_opts() to return error incase RSS is
not enabled.
- Sugested by Jakub Kicinski
Changes from v2:
* Removed frames, bytes, dropped packet stats from ethtool to avoid
duplication of same stats in netlink and ethtool.
- Sugested by Jakub Kicinski
* Removed number of channels and ringparam upper bound checking
in ethtool support.
* Fixed RSS hash option setting to reject unsupported config.
- Suggested by Michal Kubecek
Changes from v1:
* Made driver dependent on 64bit, to fix build errors related to
non availability of writeq/readq APIs for 32bit platforms.
- Reported by kbuild test robot
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:29 +0000 (18:35 +0530)]
octeontx2-pf: ethtool RSS config support
Added support to show or configure RSS hash key, indirection table,
2,4 tuple via ethtool. Also added debug msg_level support
to dump messages when HW reports errors in packet received
or transmitted.
Signed-off-by: Prakash Brahmajyosyula <bprakash@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christina Jacob [Mon, 27 Jan 2020 13:05:28 +0000 (18:35 +0530)]
octeontx2-pf: Add basic ethtool support
This patch adds ethtool support for
- Driver stats, Tx/Rx perqueue and CGX LMAC stats
- Set/show Rx/Tx queue count
- Set/show Rx/Tx ring sizes
- Set/show IRQ coalescing parameters
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Mon, 27 Jan 2020 13:05:27 +0000 (18:35 +0530)]
octeontx2-pf: Add ndo_get_stats64
Added ndo_get_stats64 which returns stats maintained by HW.
Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:25 +0000 (18:35 +0530)]
octeontx2-pf: Receive side scaling support
Adds receive side scaling (RSS) support to distribute
pkts/flows across multiple queues. Sets up key, indirection
table etc. Also added extraction of HW calculated rxhash and
adding to same to SKB ie NETIF_F_RXHASH offload support.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Geetha sowjanya [Mon, 27 Jan 2020 13:05:24 +0000 (18:35 +0530)]
octeontx2-pf: Error handling support
HW reports many errors on the receive and transmit paths.
Such as incorrect queue configuration, pkt transmission errors,
LMTST instruction errors, transmit queue full etc. These are reported
via QINT interrupt. Most of the errors are fatal and needs
reinitialization.
Also added support to allocate receive buffers in non-atomic context
when allocation fails in NAPI context.
Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Aleksey Makarov <amakarov@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:23 +0000 (18:35 +0530)]
octeontx2-pf: MTU, MAC and RX mode config support
This patch addes support to change interface MTU, MAC address
retrieval and config, RX mode ie unicast, multicast and promiscuous.
Also added link loopback support
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linu Cherian [Mon, 27 Jan 2020 13:05:22 +0000 (18:35 +0530)]
octeontx2-pf: Register and handle link notifications
PF and AF (admin function) shares 64KB of reserved memory region for
communication. This region is shared for
- Messages sent by PF and responses sent by AF.
- Notifications sent by AF and ACKs sent by PF.
This patch adds infrastructure to handle notifications sent
by AF and adds handlers to process them.
One of the main usecase of notifications from AF is physical
link changes. So this patch adds registration of PF with AF
to receive link status change notifications and also adds
the handler for that notification.
Signed-off-by: Linu Cherian <lcherian@marvell.com> Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:21 +0000 (18:35 +0530)]
octeontx2-pf: Add packet transmission support
This patch adds the packet transmission support.
For a given skb prepares send queue descriptors (SQEs) and pushes them
to HW. Here driver doesn't maintain it's own SQ rings, SQEs are pushed
to HW using a silicon specific operations called LMTST. From the
instuction HW derives the transmit queue number and queues the SQE to
that queue. These LMTST instructions are designed to avoid queue
maintenance in SW and lockless behavior ie when multiple cores are trying
to add SQEs to same queue then HW will takecare of serialization, no need
for SW to hold locks.
Also supports scatter/gather.
Co-developed-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:19 +0000 (18:35 +0530)]
octeontx2-pf: Setup interrupts and NAPI handler
Completion queue (CQ) is the one with which HW notifies SW on a packet
reception or transmission. Each of the RQ and SQ are mapped to a unique
CQ and again both CQs are mapped to same interrupt ie the CINT. So that
each core has one interrupt source in whose handler both Rx and Tx
notifications are processed.
Also
- Registered a NAPI handler for the CINT.
- Setup coalescing parameters.
- IRQ affinity hints etc
Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:18 +0000 (18:35 +0530)]
octeontx2-pf: Initialize and config queues
This patch does the initialization of all queues ie the
receive buffer pools, receive and transmit queues, completion
or notification queues etc. Allocates all required resources
(eg transmit schedulers, receive buffers etc) and configures
them for proper functioning of queues. Also sets up receive
queue's RED dropping levels.
Co-developed-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:17 +0000 (18:35 +0530)]
octeontx2-pf: Attach NIX and NPA block LFs
For a PF to function as a NIC, NPA (for Rx buffers, Tx descriptors etc)
and NIX (for rcv, send and completion queues) are the minimum resources
needed. So request admin function (AF) to attach one each of NIX and NPA
block LFs (local functions).
Only AF can configure a LF's contexts, so request AF to allocate memory
for NPA aura/pool and NIX RQ/SQ/CQ HW contexts. Upon receiving response,
save some of the HW constants like number of pointers per stack page,
size of send queue buffer (SQBs, where SQEs are queued by HW) e.t.c which
are later used to initialize queues.
A HW context here is like a state machine maintained for a descriptor
queue. eg size, head/tail pointers, irq etc etc. HW maintains this in
memory.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:16 +0000 (18:35 +0530)]
octeontx2-pf: Mailbox communication with AF
In the resource virtualization unit (RVU) each of the PF and AF
(admin function) share a 64KB of reserved memory region for
communication. This patch initializes PF <=> AF mailbox IRQs,
registers handlers for processing these communication messages.
Also adds support to process these messages in both directions
ie responses to PF initiated DOWN (PF => AF) messages and AF
initiated UP messages (AF => PF).
Mbox communication APIs and message formats are defined in AF driver
(drivers/net/ethernet/marvell/octeontx2/af), mbox.h from AF driver is
included here to avoid duplication.
Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Aleksey Makarov <amakarov@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Mon, 27 Jan 2020 13:05:15 +0000 (18:35 +0530)]
octeontx2-pf: Add Marvell OcteonTX2 NIC driver
This patch adds template for the Marvell's OcteonTX2 network
controller's physical function driver. Just the probe, PCI
specific initialization and netdev registration.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Mon, 27 Jan 2020 07:20:28 +0000 (09:20 +0200)]
net/core: Replace driver version to be kernel version
In order to stop useless driver version bumps and unify output
presented by ethtool -i, let's set default version string.
As Linus said in [1]: "Things are supposed to be backwards and
forwards compatible, because we don't accept breakage in user
space anyway. So versioning is pointless, and only causes
problems."
They cause problems when users start to see version changes
and expect specific set of features which will be different
for stable@, vanilla and distribution kernels.
Distribution kernels are based on some kernel version with extra
patches on top, for example, in RedHat world this "extra" is a lot
and for them your driver version say nothing. Users who run vanilla
kernels won't use driver version information too, because running
such kernels requires knowledge and understanding.
Another set of problems are related to difference in versioning scheme
and such doesn't allow to write meaningful automation which will work
sanely on all ethtool capable devices.
Before this change:
[leonro@erver ~]$ ethtool -i eth0
driver: virtio_net
version: 1.0.0
After this change and once ->version assignment will be deleted
from virtio_net:
[leonro@server ~]$ ethtool -i eth0
driver: virtio_net
version: 5.5.0-rc6+
Splitting final bits of the driver code into different files, which
will later be used in another driver for a new product.
This is a continuation to my previous patch series. (three of them)
Refactoring will be concluded with this series, for now.
As instructed, split the renaming and moving into different patches.
Removed stray spaces before tabs... twice.
Minor refactoring was done with the renaming, as explained in the
first patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 Jan 2020 10:33:29 +0000 (11:33 +0100)]
Merge branch 'bnxt_en-next'
Michael Chan says:
====================
bnxt_en: Updates for net-next.
This patch-set includes link up and link initialization improvements,
RSS and aRFS improvements, devlink refactoring and registration
improvements, devlink info support including documentation.
v2: Removed the TC ingress rate limiting patch. The developer Harsha needs
to rework some code.
Use fw.psid suggested by Jakub Kicinski.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:27 +0000 (04:56 -0500)]
devlink: document devlink info versions reported by bnxt_en driver
Add the set of info versions reported by bnxt_en driver, including
a description of what the version represents, and what modes (fixed,
running, stored) it reports.
v2: Use fw.psid.
Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:26 +0000 (04:56 -0500)]
bnxt_en: Add support for devlink info command
Display the following information via devlink info command:
- Driver name
- Board id
- Broad revision
- Board Serial number
- Board FW version
- FW parameter set version
- FW App version
- FW management version
- FW RoCE version
Standard output example:
$ devlink dev info pci/0000:3b:00.0
pci/0000:3b:00.0:
driver bnxt_en
serial_number 00-10-18-FF-FE-AD-05-00
versions:
fixed:
asic.id D802
asic.rev 1
running:
fw 216.1.124.0
fw.psid 0.0.0
fw.app 216.1.122.0
fw.mgmt 864.0.32.0
fw.roce 216.1.15.0
[ This version has incorporated changes suggested by Jakub Kicinski to
use generic devlink version tags. ]
v2: Use fw.psid
Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:25 +0000 (04:56 -0500)]
devlink: add macro for "fw.roce"
Add definition and documentation for the new generic info "fw.roce".
v2: Remove board.nvm_cfg since fw.psid is similar.
Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:24 +0000 (04:56 -0500)]
bnxt_en: Rename switch_id to dsn
Instead of switch_id, renaming it to dsn will be more meaningful
so that it can be used to display device serial number in follow up
patch via devlink_info command.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:23 +0000 (04:56 -0500)]
bnxt_en: Add support to update progress of flash update
This patch adds status notification to devlink flash update
while flashing is in progress.
$ devlink dev flash pci/0000:05:00.0 file 103.pkg
Preparing to flash
Flashing done
Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:22 +0000 (04:56 -0500)]
bnxt_en: Move devlink_register before registering netdev
Latest kernels get the phys_port_name via devlink, if
ndo_get_phys_port_name is not defined. To provide the phys_port_name
correctly, register devlink before registering netdev.
Also call devlink_port_type_eth_set() after registering netdev as
devlink port updates the netdev structure and notifies user.
Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:21 +0000 (04:56 -0500)]
bnxt_en: Register devlink irrespective of firmware spec version
This will allow to register for devlink port and use port features.
Also register params only if firmware spec version is at least 0x10600
which will support reading/setting numbered variables in NVRAM.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Mon, 27 Jan 2020 09:56:20 +0000 (04:56 -0500)]
bnxt_en: Refactor bnxt_dl_register()
Define bnxt_dl_params_register() and bnxt_dl_params_unregister()
functions and move params register/unregister code to these newly
defined functions. This patch is in preparation to register
devlink irrespective of firmware spec. version in the next patch.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavan Chebbi [Mon, 27 Jan 2020 09:56:18 +0000 (04:56 -0500)]
bnxt_en: Periodically check and remove aged-out ntuple filters
Currently the only time we check and remove expired filters is
when we are inserting new filters.
Improving the aRFS expiry handling by adding code to do the above
work periodically.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 27 Jan 2020 09:56:17 +0000 (04:56 -0500)]
bnxt_en: Do not accept fragments for aRFS flow steering.
In bnxt_rx_flow_steer(), if the dissected packet is a fragment, do not
proceed to create the ntuple filter and return error instead. Otherwise
we would create a filter with 0 source and destination ports because
the dissected ports would not be available for fragments.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 27 Jan 2020 09:56:15 +0000 (04:56 -0500)]
bnxt_en: Remove the setting of dev_port.
The dev_port is meant to distinguish the network ports belonging to
the same PCI function. Our devices only have one network port
associated with each PCI function and so we should not set it for
correctness.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 27 Jan 2020 09:56:14 +0000 (04:56 -0500)]
bnxt_en: Improve bnxt_probe_phy().
If the 2nd parameter fw_dflt is not set, we are calling bnxt_probe_phy()
after the firmware has reset. There is no need to query the current
PHY settings from firmware as these settings may be different from
the ethtool settings that the driver will re-establish later. So
return earlier in bnxt_probe_phy() to save one firmware call.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 27 Jan 2020 09:56:13 +0000 (04:56 -0500)]
bnxt_en: Improve link up detection.
In bnxt_update_phy_setting(), ethtool_get_link_ksettings() and
bnxt_disable_an_for_lpbk(), we inconsistently use netif_carrier_ok()
to determine link. Instead, we should use bp->link_info.link_up
which has the true link state. The netif_carrier state may be off
during self-test and while the device is being reset and may not always
reflect the true link state.
By always using bp->link_info.link_up, the code is now more
consistent and more correct. Some unnecessary link toggles are
now prevented with this patch.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 Jan 2020 10:31:36 +0000 (11:31 +0100)]
Merge branch 'ethtool-netlink-interface-part-2'
Michal Kubecek says:
====================
ethtool netlink interface, part 2
This shorter series adds support for getting and setting of wake-on-lan
settings and message mask (originally message level). Together with the
code already in net-next, this will allow full implementation of
"ethtool <dev>" and "ethtool -s <dev> ...".
Older versions of the ethtool netlink series allowed getting WoL settings
by unprivileged users and only filtered out the password but this was
a source of controversy so for now, ETHTOOL_MSG_WOL_GET request always
requires CAP_NET_ADMIN as ETHTOOL_GWOL ioctl request does.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Sun, 26 Jan 2020 22:11:19 +0000 (23:11 +0100)]
ethtool: add WOL_NTF notification
Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of
a device are modified using ETHTOOL_MSG_WOL_SET netlink message or
ETHTOOL_SWOL ioctl request.
As notifications can be received by anyone, do not include SecureOn(tm)
password in notification messages.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Sun, 26 Jan 2020 22:11:10 +0000 (23:11 +0100)]
ethtool: add DEBUG_NTF notification
Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message
mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message
or ETHTOOL_SMSGLVL ioctl request.
The notification message has the same format as reply to DEBUG_GET request.
As with other ethtool notifications, netlink requests only trigger the
notification if the mask is actually changed while ioctl request trigger it
whenever the request results in calling the ethtool_ops handler.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Sun, 26 Jan 2020 22:11:07 +0000 (23:11 +0100)]
ethtool: set message mask with DEBUG_SET request
Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubecek [Sun, 26 Jan 2020 22:11:04 +0000 (23:11 +0100)]
ethtool: provide message mask with DEBUG_GET request
Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Mon, 27 Jan 2020 10:25:07 +0000 (11:25 +0100)]
Merge branch 'bpf-flow-dissector-fix-port-ranges'
Yoshiki Komachi says:
====================
When I tried a test based on the selftest program for BPF flow dissector
(test_flow_dissector.sh), I observed unexpected result as below:
$ tc filter add dev lo parent ffff: protocol ip pref 1337 flower ip_proto \
udp src_port 8-10 action drop
$ tools/testing/selftests/bpf/test_flow_dissector -i 4 -f 9 -F
inner.dest4: 127.0.0.1
inner.source4: 127.0.0.3
pkts: tx=10 rx=10
The last rx means the number of received packets. I expected rx=0 in this
test (i.e., all received packets should have been dropped), but it resulted
in acceptance.
Although the previous commit 1bd2993626ae ("cls_flower: Fix the behavior
using port ranges with hw-offload") added new flag and field toward filtering
based on port ranges with hw-offload, it missed applying for BPF flow dissector
then. As a result, BPF flow dissector currently stores data extracted from
packets in incorrect field used for exact match whenever packets are classified
by filters based on port ranges. Thus, they never match rules in such cases
because flow dissector gives rise to generating incorrect flow keys.
This series fixes the issue by replacing incorrect flag and field with new
ones in BPF flow dissector, and adds a test for filtering based on specified
port ranges to the existing selftest program.
Changes in v2:
- set key_ports to NULL at the top of __skb_flow_bpf_to_target()
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yoshiki Komachi [Fri, 17 Jan 2020 07:05:32 +0000 (16:05 +0900)]
flow_dissector: Fix to use new variables for port ranges in bpf hook
This patch applies new flag (FLOW_DISSECTOR_KEY_PORTS_RANGE) and
field (tp_range) to BPF flow dissector to generate appropriate flow
keys when classified by specified port ranges.
Fixes: 1bd2993626ae ("cls_flower: Fix the behavior using port ranges with hw-offload") Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117070533.402240-2-komachi.yoshiki@gmail.com
Here's (probably) the last bluetooth-next pull request for the 5.6 kernel.
- Initial pieces of Bluetooth 5.2 Isochronous Channels support
- mgmt: Various cleanups and a new Set Blocked Keys command
- btusb: Added support for 04ca:3021 QCA_ROME device
- hci_qca: Multiple fixes & cleanups
- hci_bcm: Fixes & improved device tree support
- Fixed attempts to create duplicate debugfs entries
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'
'alloc_etherdev_mqs()' expects first 'tx', then 'rx'. The semantic here
looks reversed.
Reorder the arguments passed to 'alloc_etherdev_mqs()' in order to keep
the correct semantic.
In fact, this is a no-op because both XGENE_NUM_[RT]X_RING are 8.
Fixes: 32c2a7157d10 ("drivers: net: xgene: Add support for multiple queues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Mon, 27 Jan 2020 00:14:02 +0000 (16:14 -0800)]
bpf, xdp: Remove no longer required rcu_read_{un}lock()
Now that we depend on rcu_call() and synchronize_rcu() to also wait
for preempt_disabled region to complete the rcu read critical section
in __dev_map_flush() is no longer required. Except in a few special
cases in drivers that need it for other reasons.
These originally ensured the map reference was safe while a map was
also being free'd. And additionally that bpf program updates via
ndo_bpf did not happen while flush updates were in flight. But flush
by new rules can only be called from preempt-disabled NAPI context.
The synchronize_rcu from the map free path and the rcu_call from the
delete path will ensure the reference there is safe. So lets remove
the rcu_read_lock and rcu_read_unlock pair to avoid any confusion
around how this is being protected.
If the rcu_read_lock was required it would mean errors in the above
logic and the original patch would also be wrong.
Now that we have done above we put the rcu_read_lock in the driver
code where it is needed in a driver dependent way. I think this
helps readability of the code so we know where and why we are
taking read locks. Most drivers will not need rcu_read_locks here
and further XDP drivers already have rcu_read_locks in their code
paths for reading xdp programs on RX side so this makes it symmetric
where we don't have half of rcu critical sections define in driver
and the other half in devmap.
John Fastabend [Mon, 27 Jan 2020 00:14:01 +0000 (16:14 -0800)]
bpf, xdp: virtio_net use access ptr macro for xdp enable check
virtio_net currently relies on rcu critical section to access the xdp
program in its xdp_xmit handler. However, the pointer to the xdp program
is only used to do a NULL pointer comparison to determine if xdp is
enabled or not.
Use rcu_access_pointer() instead of rcu_dereference() to reflect this.
Then later when we drop rcu_read critical section virtio_net will not
need in special handling.
Heiner Kallweit [Sun, 26 Jan 2020 09:40:44 +0000 (10:40 +0100)]
r8169: don't set min_mtu/max_mtu if not needed
Defaults for min_mtu and max_mtu are set by ether_setup(), which is
called from devm_alloc_etherdev(). Let rtl_jumbo_max() only return
a positive value if actually jumbo packets are supported. This also
allows to remove constant Jumbo_1K which is a little misleading anyway.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 25 Jan 2020 21:01:11 +0000 (23:01 +0200)]
net: dsa: Fix use-after-free in probing of DSA switch tree
DSA sets up a switch tree little by little. Every switch of the N
members of the tree calls dsa_register_switch, and (N - 1) will just
touch the dst->ports list with their ports and quickly exit. Only the
last switch that calls dsa_register_switch will find all DSA links
complete in dsa_tree_setup_routing_table, and not return zero as a
result but instead go ahead and set up the entire DSA switch tree
(practically on behalf of the other switches too).
The trouble is that the (N - 1) switches don't clean up after themselves
after they get an error such as EPROBE_DEFER. Their footprint left in
dst->ports by dsa_switch_touch_ports is still there. And switch N, the
one responsible with actually setting up the tree, is going to work with
those stale dp, dp->ds and dp->ds->dev pointers. In particular ds and
ds->dev might get freed by the device driver.
Be there a 2-switch tree and the following calling order:
- Switch 1 calls dsa_register_switch
- Calls dsa_switch_touch_ports, populates dst->ports
- Calls dsa_port_parse_cpu, gets -EPROBE_DEFER, exits.
- Switch 2 calls dsa_register_switch
- Calls dsa_switch_touch_ports, populates dst->ports
- Probe doesn't get deferred, so it goes ahead.
- Calls dsa_tree_setup_routing_table, which returns "complete == true"
due to Switch 1 having called dsa_switch_touch_ports before.
- Because the DSA links are complete, it calls dsa_tree_setup_switches
now.
- dsa_tree_setup_switches iterates through dst->ports, initializing
the Switch 1 ds structure (invalid) and the Switch 2 ds structure
(valid).
- Undefined behavior (use after free, sometimes NULL pointers, etc).
Real example below (debugging prints added by me, as well as guards
against NULL pointers):
The solution is to recognize that the functions that call
dsa_switch_touch_ports (dsa_switch_parse_of, dsa_switch_parse) have side
effects, and therefore one should clean up their side effects on error
path. The cleanup of dst->ports was taken from dsa_switch_remove and
moved into a dedicated dsa_switch_release_ports function, which should
really be per-switch (free only the members of dst->ports that are also
members of ds, instead of all switch ports).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 25 Jan 2020 12:42:14 +0000 (13:42 +0100)]
net: remove eth_change_mtu
All usage of this function was removed three years ago, and the
function was marked as deprecated: 66dc69596fc7 ("net: deprecate eth_change_mtu, remove usage")
So I think we can remove it now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 25 Jan 2020 11:48:51 +0000 (12:48 +0100)]
net: socionext: fix xdp_result initialization in netsec_process_rx
Fix xdp_result initialization in netsec_process_rx in order to not
increase rx counters if there is no bpf program attached to the xdp hook
and napi_gro_receive returns GRO_DROP
Fixes: 77ef2067ddb9f ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sat, 25 Jan 2020 11:48:50 +0000 (12:48 +0100)]
net: socionext: fix possible user-after-free in netsec_process_rx
Fix possible use-after-free in in netsec_process_rx that can occurs if
the first packet is sent to the normal networking stack and the
following one is dropped by the bpf program attached to the xdp hook.
Fix the issue defining the skb pointer in the 'budget' loop
Fixes: 77ef2067ddb9f ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: allow per-net notifier to follow netdev into namespace
Currently we have per-net notifier, which allows to get only
notifications relevant to particular network namespace. That is enough
for drivers that have netdevs local in a particular namespace (cannot
move elsewhere).
However if netdev can change namespace, per-net notifier cannot be used.
Introduce dev_net variant that is basically per-net notifier with an
extension that re-registers the per-net notifier upon netdev namespace
change. Basically the per-net notifier follows the netdev into
namespace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce dev_net variants of netdev notifier register/unregister functions
and allow per-net notifier to follow the netdevice into the namespace it is
moved to.
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 Jan 2020 10:00:21 +0000 (11:00 +0100)]
Merge branch 'Support-fraglist-GRO-GSO'
Steffen Klassert says:
====================
Support fraglist GRO/GSO
This patchset adds support to do GRO/GSO by chaining packets
of the same flow at the SKB frag_list pointer. This avoids
the overhead to merge payloads into one big packet, and
on the other end, if GSO is needed it avoids the overhead
of splitting the big packet back to the native form.
Patch 1 adds netdev feature flags to enable fraglist GRO,
this implements one of the configuration options discussed
at netconf 2019.
Patch 2 adds a netdev software feature set that defaults to off
and assigns the new fraglist GRO feature flag to it.
Patch 3 adds the core infrastructure to do fraglist GRO/GSO.
Patch 4 enables UDP to use fraglist GRO/GSO if configured.
I have only meaningful forwarding performance measurements.
I did some tests for the local receive path with netperf and iperf,
but in this case the sender that generates the packets is the
bottleneck. So the benchmarks are not that meaningful for the
receive path.
Paolo Abeni did some benchmarks of the local receive path for the
RFC v2 version of this pachset, results can be found here:
- Add IPv6 support.
- Split patchset to enable UDP GRO by default before adding
fraglist GRO support.
- Mark fraglist GRO packets as CHECKSUM_NONE.
- Take a refcount on the first segment skb when doing fraglist
segmentation. With this we can use the same error handling
path as with standard segmentation.
Changes from RFC v2:
- Add a netdev feature flag to configure listifyed GRO.
- Fix UDP GRO enabling for IPv6.
- Fix a rcu_read_lock() imbalance.
- Fix error path in skb_segment_list().
Changes from RFC v3:
- Rename NETIF_F_GRO_LIST to NETIF_F_GRO_FRAGLIST and add
NETIF_F_GSO_FRAGLIST.
- Move introduction of SKB_GSO_FRAGLIST to patch 2.
- Use udpv6_encap_needed_key instead of udp_encap_needed_key in IPv6.
- Move some missplaced code from patch 5 to patch 1 where it belongs to.
Changes from RFC v4:
- Drop the 'UDP: enable GRO by default' patch for now. Standard UDP GRO
is not changed with this patchset.
- Rebase to net-next current.
Changes fom v1 (December 18th):
- Do a full __copy_skb_header instead of tryng to find the really
needed subset header fields. Thisa can be done later.
- Mark all fraglist GRO packets with CHECKSUM_UNNECESSARY.
- Rebase to net-next current.
Changes fom v2 (January 24th):
- Do the CHECKSUM_UNNECESSARY setting from IPv4 for IPv6 too.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Sat, 25 Jan 2020 10:26:45 +0000 (11:26 +0100)]
udp: Support UDP fraglist GRO/GSO.
This patch extends UDP GRO to support fraglist GRO/GSO
by using the previously introduced infrastructure.
If the feature is enabled, all UDP packets are going to
fraglist GRO (local input and forward).
After validating the csum, we mark ip_summed as
CHECKSUM_UNNECESSARY for fraglist GRO packets to
make sure that the csum is not touched.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Sat, 25 Jan 2020 10:26:44 +0000 (11:26 +0100)]
net: Support GRO/GSO fraglist chaining.
This patch adds the core functions to chain/unchain
GSO skbs at the frag_list pointer. This also adds
a new GSO type SKB_GSO_FRAGLIST and a is_flist
flag to napi_gro_cb which indicates that this
flow will be GROed by fraglist chaining.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Sat, 25 Jan 2020 10:26:43 +0000 (11:26 +0100)]
net: Add a netdev software feature set that defaults to off.
The previous patch added the NETIF_F_GRO_FRAGLIST feature.
This is a software feature that should default to off.
Current software features default to on, so add a new
feature set that defaults to off.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert [Sat, 25 Jan 2020 10:26:42 +0000 (11:26 +0100)]
net: Add fraglist GRO/GSO feature flags
This adds new Fraglist GRO/GSO feature flags. They will be used
to configure fraglist GRO/GSO what will be implemented with some
followup paches.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sven Auhagen [Sat, 25 Jan 2020 08:07:03 +0000 (08:07 +0000)]
mvneta driver disallow XDP program on hardware buffer management
Recently XDP Support was added to the mvneta driver
for software buffer management only.
It is still possible to attach an XDP program if
hardware buffer management is used.
It is not doing anything at that point.
The patch disallows attaching XDP programs to mvneta
if hardware buffer management is used.
I am sorry about that. It is my first submission and I am having
some troubles with the format of my emails.
v4 -> v5:
- Remove extra tabs
v3 -> v4:
- Please ignore v3 I accidentally submitted
my other patch with git-send-mail and v4 is correct
v2 -> v3:
- My mailserver corrupted the patch
resubmission with git-send-email
v1 -> v2:
- Fixing the patches indentation
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Fri, 24 Jan 2020 23:08:04 +0000 (23:08 +0000)]
rxrpc: Fix use-after-free in rxrpc_receive_data()
The subpacket scanning loop in rxrpc_receive_data() references the
subpacket count in the private data part of the sk_buff in the loop
termination condition. However, when the final subpacket is pasted into
the ring buffer, the function is no longer has a ref on the sk_buff and
should not be looking at sp->* any more. This point is actually marked in
the code when skb is cleared (but sp is not - which is an error).
Fix this by caching sp->nr_subpackets in a local variable and using that
instead.
Also clear 'sp' to catch accesses after that point.
This can show up as an oops in rxrpc_get_skb() if sp->nr_subpackets gets
trashed by the sk_buff getting freed and reused in the meantime.
Fixes: 03febc9611ee ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Worley [Fri, 24 Jan 2020 21:53:27 +0000 (16:53 -0500)]
net: include struct nhmsg size in nh nlmsg size
Include the size of struct nhmsg size when calculating
how much of a payload to allocate in a new netlink nexthop
notification message.
Without this, we will fail to fill the skbuff at certain nexthop
group sizes.
You can reproduce the failure with the following iproute2 commands:
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy
ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19
ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19
ip next add id 1111 group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19
ip next del id 1111
Fixes: 6e9d1ef54f91 ("nexthop: Add support for nexthop groups") Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Ignatov [Fri, 24 Jan 2020 22:41:42 +0000 (14:41 -0800)]
tools/bpf: Allow overriding llvm tools for runqslower
tools/testing/selftests/bpf/Makefile supports overriding clang, llc and
other tools so that custom ones can be used instead of those from PATH.
It's convinient and heavily used by some users.
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
sport 80 0xffff flowid 1:3
tc filter add dev eth0 parent 1:0 protocol ip prio 1 u32 match ip \
sport 25 0xffff flowid 1:4
where filters are installed on qdisc 1:0, so we can't merely
search from class 1:1 when creating class 1:3 and class 1:4. We have
to walk through all the child classes of the direct parent qdisc.
Otherwise we would miss filters those need reverse binding.
Fixes: 04212b6c6b10 ("net_sched: add reverse binding for tc class") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 24 Jan 2020 00:26:18 +0000 (16:26 -0800)]
net_sched: fix ops->bind_class() implementations
The current implementations of ops->bind_class() are merely
searching for classid and updating class in the struct tcf_result,
without invoking either of cl_ops->bind_tcf() or
cl_ops->unbind_tcf(). This breaks the design of them as qdisc's
like cbq use them to count filters too. This is why syzbot triggered
the warning in cbq_destroy_class().
In order to fix this, we have to call cl_ops->bind_tcf() and
cl_ops->unbind_tcf() like the filter binding path. This patch does
so by refactoring out two helper functions __tcf_bind_filter()
and __tcf_unbind_filter(), which are lockless and accept a Qdisc
pointer, then teaching each implementation to call them correctly.
Note, we merely pass the Qdisc pointer as an opaque pointer to
each filter, they only need to pass it down to the helper
functions without understanding it at all.
Fixes: 04212b6c6b10 ("net_sched: add reverse binding for tc class") Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
Netfilter updates for net-next
This batch contains Netfilter updates for net-next:
1) Add nft_setelem_parse_key() helper function.
2) Add NFTA_SET_ELEM_KEY_END to specify a range with one single element.
3) Add NFTA_SET_DESC_CONCAT to describe the set element concatenation,
from Stefano Brivio.
4) Add bitmap_cut() to copy n-bits from source to destination,
from Stefano Brivio.
5) Add set to match on arbitrary concatenations, from Stefano Brivio.
6) Add selftest for this new set type. An extract of Stefano's
description follows:
"Existing nftables set implementations allow matching entries with
interval expressions (rbtree), e.g. 192.0.2.1-192.0.2.4, entries
specifying field concatenation (hash, rhash), e.g. 192.0.2.1:22,
but not both.
In other words, none of the set types allows matching on range
expressions for more than one packet field at a time, such as ipset
does with types bitmap:ip,mac, and, to a more limited extent
(netmasks, not arbitrary ranges), with types hash:net,net,
hash:net,port, hash:ip,port,net, and hash:net,port,net.
As a pure hash-based approach is unsuitable for matching on ranges,
and "proxying" the existing red-black tree type looks impractical as
elements would need to be shared and managed across all employed
trees, this new set implementation intends to fill the functionality
gap by employing a relatively novel approach.
The fundamental idea, illustrated in deeper detail in patch 5/9, is to
use lookup tables classifying a small number of grouped bits from each
field, and map the lookup results in a way that yields a verdict for
the full set of specified fields.
The grouping bit aspect is loosely inspired by the Grouper algorithm,
by Jay Ligatti, Josh Kuhn, and Chris Gage (see patch 5/9 for the full
reference).
A reference, stand-alone implementation of the algorithm itself is
available at:
https://pipapo.lameexcu.se
Some notes about possible future optimisations are also mentioned
there. This algorithm reduces the matching problem to, essentially,
a repetitive sequence of simple bitwise operations, and is
particularly suitable to be optimised by leveraging SIMD instruction
sets."
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Tue, 21 Jan 2020 23:17:56 +0000 (00:17 +0100)]
selftests: netfilter: Introduce tests for sets with range concatenation
This test covers functionality and stability of the newly added
nftables set implementation supporting concatenation of ranged
fields.
For some selected set expression types, test:
- correctness, by checking that packets match or don't
- concurrency, by attempting races between insertion, deletion, lookup
- timeout feature, checking that packets don't match expired entries
and (roughly) estimate matching rates, comparing to baselines for
simple drop on netdev ingress hook and for hash and rbtrees sets.
In order to send packets, this needs one of sendip, netcat or bash.
To flood with traffic, iperf3, iperf and netperf are supported. For
performance measurements, this relies on the sample pktgen script
pktgen_bench_xmit_mode_netif_receive.sh.
If none of the tools suitable for a given test are available, specific
tests will be skipped.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
projects / kernel.git / log