Rodrigo Vivi [Tue, 25 Feb 2020 17:29:58 +0000 (09:29 -0800)]
Merge drm/drm-next into drm-intel-next-queued
Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.
Reference: https://patchwork.freedesktop.org/series/70952/ Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com
drm/i915/psr: Force PSR probe only after full initialization
Commit 60c6a14b489b ("drm/i915/display: Force the state compute phase
once to enable PSR") was forcing the state compute too earlier
causing errors because not everything was initialized, so here
moving to the end of i915_driver_modeset_probe() when the display is
all initialized.
Also fixing the place where it disarm the force probe as during the
atomic check phase errors could happen like the ones due locking and
it would cause PSR to never be enabled if that happens.
Leaving the disarm to the atomic commit phase, intel_psr_enable() or
intel_psr_update() will be called even if the current state do not
allow PSR to be enabled.
v2: Check if intel_dp is null in intel_psr_force_mode_changed_set()
v3: Check intel_dp before get dev_priv
v4:
- renamed intel_psr_force_mode_changed_set() to
intel_psr_set_force_mode_changed()
- removed the set parameter from intel_psr_set_force_mode_changed()
- not calling intel_psr_set_force_mode_changed() from
intel_psr_enable/update(), directly setting it after the same checks
that intel_psr_set_force_mode_changed() does
- moved intel_psr_set_force_mode_changed() arm call to
i915_driver_modeset_probe() as it is a better for a PSR call, all the
functions calls happening between the old and the new function call
will cause issue
Fixes: 60c6a14b489b ("drm/i915/display: Force the state compute phase once to enable PSR") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151 Tested-by: Ross Zwisler <zwisler@google.com> Reported-by: Ross Zwisler <zwisler@google.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com
Ville Syrjälä [Fri, 21 Feb 2020 15:43:10 +0000 (17:43 +0200)]
drm/i915: Correctly terminate connector iteration
One should use drm_connector_list_iter_end() rather than
drm_connector_list_iter_begin() to terminate the connector
iteration.
Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/issues/1278 Fixes: e24bcd34c1dd ("drm/i915/dp: Add all tiled and port sync conns to modeset") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221154310.14858-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Jani Nikula [Fri, 21 Feb 2020 10:54:14 +0000 (12:54 +0200)]
drm/i915: fix header test with GCOV
$(CC) with $(CFLAGS_GCOV) assumes the output filename with .gcno suffix
appended is writable. This is not the case when the output filename is
/dev/null:
Chris Wilson [Sun, 23 Feb 2020 17:37:46 +0000 (17:37 +0000)]
drm/i915/display: Fix inverted WARN_ON
Restore the previous WARN_ON(cond) so that we don't complain about poor
old Cherryview.
Fixes: eb020ca3d43f ("drm/i915/display/dp: Make WARN* drm specific where drm_device ptr is available") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200223173959.3885742-1-chris@chris-wilson.co.uk
Pankaj Bharadiya [Thu, 20 Feb 2020 16:55:04 +0000 (22:25 +0530)]
drm/i915/display/dp: Make WARN* drm specific where drm_device ptr is available
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
Pankaj Bharadiya [Thu, 20 Feb 2020 16:55:02 +0000 (22:25 +0530)]
drm/i915/display/display: Make WARN* drm specific where drm_device ptr is available
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
Pankaj Bharadiya [Thu, 20 Feb 2020 16:55:01 +0000 (22:25 +0530)]
drm/i915/display/ddi: Make WARN* drm specific where drm_device ptr is available
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
Kees Cook [Fri, 21 Feb 2020 00:05:17 +0000 (16:05 -0800)]
drm/i915: Distribute switch variables for initialization
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/gpu/drm/i915/display/intel_display.c: In function ‘check_digital_port_conflicts’:
drivers/gpu/drm/i915/display/intel_display.c:12963:17: warning: statement will never be executed [-Wswitch-unreachable]
12963 | unsigned int port_mask;
| ^~~~~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_get_fifo_size’:
drivers/gpu/drm/i915/intel_pm.c:474:7: warning: statement will never be executed [-Wswitch-unreachable]
474 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
drivers/gpu/drm/i915/intel_pm.c: In function ‘vlv_atomic_update_fifo’:
drivers/gpu/drm/i915/intel_pm.c:1997:7: warning: statement will never be executed [-Wswitch-unreachable]
1997 | u32 dsparb, dsparb2, dsparb3;
| ^~~~~~
Jani Nikula [Wed, 19 Feb 2020 13:37:56 +0000 (15:37 +0200)]
drm/i915: split i915_driver_modeset_probe() to pre/post irq install
Pair the irq install and uninstall in the same layer. There are no
functional changes in the happy day scenario. The cleanup paths are
currently a mess though.
Note that modeset probe pre-irq + post-irq install are matched by
modeset driver remove pre-irq + post-irq uninstall, together, but not
independently. They are not symmetric pairs.
Chris Wilson [Fri, 21 Feb 2020 23:51:35 +0000 (23:51 +0000)]
drm/i915/gt: Push the GPU cancellation to the backend
Upon unregistering the user interface, we mark the GPU as wedged to
ensure we push no new work to the GPU, and to flush all current work
from the GPU. Move this call to the GT backend.
Chris Wilson [Fri, 21 Feb 2020 22:18:18 +0000 (22:18 +0000)]
drm/i915: Avoid recursing onto active vma from the shrinker
We mark the vma as active while binding it in order to protect outselves
from being shrunk under mempressure. This only works if we are strict in
not attempting to shrink active objects.
Matt Roper [Wed, 19 Feb 2020 21:56:55 +0000 (13:56 -0800)]
drm/i915/tgl: Add Wa_22010178259:tgl
We need to explicitly set the TLB Request Timer initial value in the
BW_BUDDY registers to 0x8 rather than relying on the hardware default.
v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct
bits during the rmw. (Jose)
Bspec: 52890
Bspec: 50044 Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Chris Wilson [Fri, 21 Feb 2020 12:19:40 +0000 (12:19 +0000)]
drm/i915: Check that the vma hasn't been closed before we insert it
As there is a delay before we pin a vma, there is an opportunity for
another thread to have closed the vm and its vma (including us).
Check as soon as we acquire the vm->mutex and know the vm/vma is stable.
Michał Winiarski [Wed, 19 Feb 2020 16:18:22 +0000 (17:18 +0100)]
drm/i915/pmu: Avoid using globals for PMU events
Attempting to bind / unbind module from devices where we have both
integrated and discreete GPU handled by i915, will cause us to try and
double free the global state, hitting null ptr deref in free_event_attributes.
Let's move it to i915_pmu.
Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-2-michal.winiarski@intel.com
Michał Winiarski [Wed, 19 Feb 2020 16:18:21 +0000 (17:18 +0100)]
drm/i915/pmu: Avoid using globals for CPU hotplug state
Attempting to bind / unbind module from devices where we have both
integrated and discreete GPU handled by i915 can lead to leaks and
warnings from cpuhp:
Error: Removing state XXX which has instances left.
Let's move the state to i915_pmu.
Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-1-michal.winiarski@intel.com
Wambui Karuga [Tue, 18 Feb 2020 17:39:36 +0000 (20:39 +0300)]
drm/i915/perf: conversion to struct drm_device based logging macros.
Manual conversion of instances of printk based drm logging macros to the
struct drm_device based logging macros in i915/i915_perf.c.
Also involves extraction of the struct drm_i915_private device from
various intel types for use in the macros.
Instances of the DRM_DEBUG printk macro were not converted due to the
lack of an analogous struct drm_device based logging macro.
v2: remove instances of DRM_DEBUG that were converted.
Matt Roper [Tue, 4 Feb 2020 01:10:32 +0000 (17:10 -0800)]
drm/i915/tgl: Program MBUS_ABOX{1,2}_CTL during display init
On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL
during display initialization, but on gen12 we're now supposed to
program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well.
v2:
- Program registers with rmw to preserve contents of unrelated bits.
- Switch to the new display uncore helpers.
Matt Roper [Tue, 4 Feb 2020 01:10:31 +0000 (17:10 -0800)]
drm/i915: Program MBUS with rmw during initialization
It wasn't terribly clear from the bspec's wording, but after discussion
with the hardware folks, it turns out that we need to preserve the
pre-existing contents of the MBUS ABOX control register when
initializing a few specific bits.
Ville Syrjälä [Wed, 12 Feb 2020 16:17:32 +0000 (18:17 +0200)]
drm/i915: Use intel_de_write_fw() for skl+ scaler registers
We have to write quite a few registers when programming the
pipe scaler. Let's use intel_de_write_fw() for these to reduce
the lockdep overhead a bit. All plane registers (including plane
scaler) already do this.
We already had a few accidental intel_de_write_fw() in there.
Ville Syrjälä [Wed, 5 Feb 2020 18:35:43 +0000 (20:35 +0200)]
drm/i915: Mark all HPD capabled connectors as such
Currently we only set the DRM_CONNECTOR_POLL_{DISCONNECT,CONNECT}
bits in intel_connector->polled (the base setting), leading to
some confusing looking code to reset drm_connector->polled
(the actual setting) to DRM_CONNECTOR_POLL_HPD. Let's set
intel_connector->polled = DRM_CONNECTOR_POLL_HPD for all hpd
capable connectors, and then we don't need so many special
cases in the hotplug code.
Ville Syrjälä [Wed, 5 Feb 2020 18:35:42 +0000 (20:35 +0200)]
drm/i915/hpd: Replace the loop-within-loop with two independent loops
No point in looping over all connectors for each hpd pin. Just loop
over each connector first and deal with each one's hpd pin. Then
loop over all the hpd pins to mark them as enabled again.
Dave Airlie [Thu, 20 Feb 2020 05:21:02 +0000 (15:21 +1000)]
Merge tag 'drm-misc-next-2020-02-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.7:
UAPI Changes:
- lima: Add support for heap buffers
Cross-subsystem Changes:
Core Changes:
- Implement mode_config mode_valid for memory constrained drivers
- Bus format negociation between bridges
- Consolidate fake vblank events for drivers without vblank interrupts
- drm/bufs: dma_alloc related cleanups
- drm/dp_mst: Various fixes
- drm/print: New drm_device based print helpers
- Thomas is a drm-misc maintainer now!
Driver Changes:
- DPMS cleanups for atomic drivers
- Removal of owner field in SPI tinydrm drivers
- Removal of explicit dependency on DT for tinydrm drivers
- Conversion to YAML schemas for DT bindings
- tidss: New driver
- virtio: various reworks and fixes
- Our usual dozen or so new panels or bridges
We are quite trigger happy in cleaning up the firmware blobs, as we do
so from several error/fini paths in GuC/HuC/uC code. We do have the
__uc_cleanup_firmwares cleanup function, which unwinds
__uc_fetch_firmwares and is already called both from the error path of
gem_init and from gem_driver_release, so let's stop cleaning up from
all the other paths.
The fact that we're not cleaning the firmware immediately means that
we can't consider firmware availability as an indication of
initialization success. A "LOADABLE" status has been added to
indicate that the initialization was successful, to be used to
selectively load HuC only if HuC init has completed (HuC init failure
is not considered a fatal error).
v2: s/ready_to_load/loadable (Michal), only run guc/huc_fini if the
fw is in loadable state
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-9-daniele.ceraolospurio@intel.com
Now that we can differentiate wants vs uses GuC/HuC, intel_uc_init is
restricted to running only if we have successfully fetched the required
blob(s) and are committed to using the microcontroller(s).
The only remaining thing that can go wrong in uc_init is the allocation
of GuC/HuC related objects; if we get such a failure better to bail out
immediately instead of wedging later, like we do for e.g.
intel_engines_init, since without objects we can't use the HW, including
not being able to attempt the firmware load.
While at it, remove the unneeded fw_cleanup call (this is handled
outside of gt_init) and add a probe failure injection point for testing.
Also, update the logs for <g/h>uc_init failures to probe_failure() since
they will cause the driver load to fail.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-8-daniele.ceraolospurio@intel.com
drm/i915/guc: Apply new uC status tracking to GuC submission as well
To be able to differentiate the before and after of our commitment to
GuC submission, which will be used in follow-up patches to early set-up
the submission structures.
To be able to setup GuC submission functions during engine init we need
to commit to using GuC as soon as possible.
Currently, the only thing that can stop us from using the
microcontrollers once we've fetched the blobs is a fundamental
error (e.g. OOM); given that if we hit such an error we can't really
fall-back to anything, we can "officialize" the FW fetching completion
as the moment at which we're committing to using GuC.
To better differentiate this case, the uses_guc check, which indicates
that GuC is supported and was selected in modparam, is renamed to
wants_guc and a new uses_guc is introduced to represent the case were
we're committed to using the GuC. Note that uses_guc does still not imply
that the blob is actually loaded on the HW (is_running is the check for
that). Also, since we need to have attempted the fetch for the result
of uses_guc to be meaningful, we need to make sure we've moved away
from INTEL_UC_FIRMWARE_SELECTED.
All the GuC changes have been mirrored on the HuC for coherency.
v2: split fetch return changes and new macros to their own patches,
support HuC only if GuC is wanted, improve "used" state
description (Michal)
v3: s/wants_huc/uses_huc in uc_init_wopcm
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Fernando Pacheco <fernando.pacheco@intel.com> #v1 Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-6-daniele.ceraolospurio@intel.com
drm/i915/uc: Update the FW status on injected fetch error
In a follow up patch we will rely on the fact that the status always
moves away from "SELECTED" after the fetch is attempted to decide what
to do with the GuC.
v2: Split this change to its own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-4-daniele.ceraolospurio@intel.com
use intel_uc_uses_guc_submission() directly instead, to be consistent in
the way we check what we want to do with the GuC.
v2: do not go through ctx->vm->gt, use i915->gt instead
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1 Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-3-daniele.ceraolospurio@intel.com
use intel_uc_uses_guc() directly instead, to be consistent in the way we
check what we want to do with the GuC.
v2: split guc_log_info changes to their own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-2-daniele.ceraolospurio@intel.com
drm/i915/debugfs: Pass guc_log struct to i915_guc_log_info
The log struct is the only thing the function needs (apart from
the seq_file), so we can pass just that instead of the whole dev_priv.
v2: Split this change to its own patch (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200218223327.11058-1-daniele.ceraolospurio@intel.com
Chris Wilson [Thu, 20 Feb 2020 12:36:07 +0000 (12:36 +0000)]
drm/i915: Double check bumping after the spinlock
In preparation for making GEM execbuf parallel, we need to be prepared
to handle very early declaration of dependencies -- even before our
signaler has itself been submitted.
Chris Wilson [Thu, 20 Feb 2020 07:50:20 +0000 (07:50 +0000)]
drm/i915/gt: Protect signaler walk with RCU
While we know that the waiters cannot disappear as we walk our list
(only that they might be added), the same cannot be said for our
signalers as they may be completed by the HW and retired as we process
this request. Ergo we need to use rcu to protect the list iteration and
remember to mark up the list_del_rcu.
v2: Mark the deps as safe-for-rcu
Fixes: 793c22617367 ("drm/i915/gt: Protect execlists_hold/unhold from new waiters") Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200220075025.1539375-1-chris@chris-wilson.co.uk
Manasi Navare [Fri, 14 Feb 2020 11:41:25 +0000 (03:41 -0800)]
drm/i915/dp: Compute port sync crtc states post compute_config()
This patch pushes out the computation of master and slave
transcoders in crtc states after encoder's compute_config hook.
This ensures that the assigned master slave crtcs have exact same
mode and timings which is a requirement for Port sync mode
to be enabled.
v3:
* Make crtc_state const, remove crtc state NULL init (Ville)
v2:
* Correct indentation
* Rename to intel_ddi_port_sync_transcoders (Ville)
* remove unwanted debug (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-2-manasi.d.navare@intel.com
Add an optional secondary encoder state compute hook. This gets
called after the normak .compute_config() has been called for
all the encoders in the state. Thus in the new hook we can rely
on all derived state populated by .compute_config() to be already
set up. Should be useful for MST and port sync master/slave
transcoder selection.
Chris Wilson [Wed, 19 Feb 2020 12:34:18 +0000 (12:34 +0000)]
drm/i915/selftests: Mark GPR checking more hostile
Currently, we check that a new context has a clear set of general
purpose registers. Add a little bit of hostility by preempting our new
context and re-poisoning the GPR to ensure that there is no context
leakage from preemption.
Chris Wilson [Sun, 16 Feb 2020 16:34:45 +0000 (16:34 +0000)]
drm/i915: Read rawclk_freq earlier
Read the rawclk_freq during runtime info probing, prior to its first use
in computing the CS timestamp frequency. Then store it in the runtime
info, and include it in the debug printouts.
Chris Wilson [Tue, 18 Feb 2020 16:21:48 +0000 (16:21 +0000)]
drm/i915/gt: Refactor l3cc/mocs availability
On dgfx, we only use l3cc and not mocs, but we share the table
containing both register definitions with Tigerlake. This confuses our
selftest that verifies that both sets of registers do contain the values
in our tables after various events (idling, reset, activity etc).
When constructing the table of register definitions, also include the
flags for which registers are valid so that information is computed
centrally and available to all callers.
Jani Nikula [Fri, 14 Feb 2020 13:50:58 +0000 (15:50 +0200)]
drm/i915: split i915_driver_modeset_remove() to pre/post irq uninstall
Push irq uninstall further up, by splitting i915_driver_modeset_remove()
to two, the part with working irqs before irq uninstall, and the part
after irq uninstall. No functional changes.
Jani Nikula [Fri, 14 Feb 2020 13:50:57 +0000 (15:50 +0200)]
drm/i915: split intel_modeset_driver_remove() to pre/post irq uninstall
Split intel_modeset_driver_remove() to two, the part with working irqs
before irq uninstall, and the part after irq uninstall. Move
irq_unintall() closer to the layer it belongs.
The error path in i915_driver_modeset_probe() looks obviously weird
after this, but remains as good or broken as it ever was. No functional
changes.
Jani Nikula [Mon, 17 Feb 2020 18:42:19 +0000 (20:42 +0200)]
drm/i915/gem: use spinlock_t instead of struct spinlock
spinlock_t is one case where the typedef is to be preferred over struct
spinlock.
Fixes: 42fb60de3129 ("drm/i915/gem: Don't leak non-persistent requests on changing engines") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200217184219.15325-1-jani.nikula@intel.com
Chris Wilson [Tue, 18 Feb 2020 21:12:15 +0000 (21:12 +0000)]
drm/i915/selftests: Flush tasklet on wait_for_submit()
Always flush the tasklet if we have pending submissions in
wait_for_submit(), so that even if we see the HW has started before we
process its ack, when we return the execlists state is well defined.
Jani Nikula [Fri, 14 Feb 2020 14:09:10 +0000 (16:09 +0200)]
drm/i915/display: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
Jani Nikula [Fri, 14 Feb 2020 14:09:09 +0000 (16:09 +0200)]
drm/i915/csr: use intel_de_*() functions for register access
The implicit "dev_priv" local variable use has been a long-standing pain
point in the register access macros I915_READ(), I915_WRITE(),
POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW().
Replace them with the corresponding new display engine register
accessors intel_de_read(), intel_de_write(), intel_de_posting_read(),
intel_de_read_fw(), and intel_de_write_fw().
Chris Wilson [Mon, 17 Feb 2020 09:58:35 +0000 (09:58 +0000)]
drm/i915/gt: Rearrange code to silence compiler
Without selftests enabled, I915_SELFTEST_ONLY becomes a dummy,
generating a bare '0'. This causes the compiler to complain about a
useless line, and while we could use I915_SELFTEST_DECLARE instead, it
is a bit messier. Move the selftest-only code to a helper and make that
conditional on having selftests enabled.
Jani Nikula [Wed, 12 Feb 2020 14:40:57 +0000 (16:40 +0200)]
drm/i915: split out vlv/chv specific suspend/resume code
i915_drv.c is a fairly big file, and having very specific vlv/chv
suspend/resume code in it is a distraction. Split it out to a new
vlv_suspend.[ch] file.
Linus Torvalds [Sun, 16 Feb 2020 21:05:46 +0000 (13:05 -0800)]
Merge tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI update from Corey Minyard:
"Minor bug fixes for IPMI
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB
driver, which is something I wanted from the beginning for it"
* tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi:
drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write
ipmi:ssif: Handle a possible NULL pointer reference
drivers: ipmi: Modify max length of IPMB packet
drivers: ipmi: Support raw i2c packet in IPMB
Linus Torvalds [Sun, 16 Feb 2020 21:01:42 +0000 (13:01 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
Linus Torvalds [Sun, 16 Feb 2020 20:49:36 +0000 (12:49 -0800)]
Merge tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes for use-after-free and memory leaking in the EDAC core, by
Robert Richter.
Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
unearthed issues with the lifespan of memory allocated by the EDAC
memory controller descriptor due to misdesigned memory freeing, done
partially by the EDAC core *and* the driver core, which is problematic
to say the least.
These two are minimal fixes to take care of stable - a proper rework
is following which cleans up that mess properly"
* tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sysfs: Remove csrow objects on errors
EDAC/mc: Fix use-after-free and memleaks during device removal
Linus Torvalds [Sun, 16 Feb 2020 20:35:52 +0000 (12:35 -0800)]
Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Not a lot here, which is great, basically just three small bcache
fixes from Coly, and four NVMe fixes via Keith"
* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
bcache: remove macro nr_to_fifo_front()
bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
bcache: ignore pending signals when creating gc and allocator thread
Linus Torvalds [Sun, 16 Feb 2020 19:43:45 +0000 (11:43 -0800)]
Merge tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two races fixed, memory leak fix, sysfs directory fixup and two new
log messages:
- two fixed race conditions: extent map merging and truncate vs
fiemap
- create the right sysfs directory with device information and move
the individual device dirs under it
- print messages when the tree-log is replayed at mount time or
cannot be replayed on remount"
* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs, move device id directories to UUID/devinfo
btrfs: sysfs, add UUID/devinfo kobject
Btrfs: fix race between shrinking truncate and fiemap
btrfs: log message when rw remount is attempted with unclean tree-log
btrfs: print message when tree-log replay starts
Btrfs: fix race between using extent maps and merging them
btrfs: ref-verify: fix memory leaks
Linus Torvalds [Sun, 16 Feb 2020 19:41:29 +0000 (11:41 -0800)]
Merge tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable"
* tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
cifs: Fix mode output in debugging statements
cifs: fix mount option display for sec=krb5i
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve explanation of a mount failure caused by a misconfigured kernel
jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
ext4: add cond_resched() to ext4_protect_reserved_inode
ext4: fix checksum errors with indexed dirs
ext4: fix support for inode sizes > 1024 bytes
ext4: simplify checking quota limits in ext4_statfs()
ext4: don't assume that mmp_nodename/bdevname have NUL
Chris Wilson [Sun, 16 Feb 2020 16:17:46 +0000 (16:17 +0000)]
drm/i915: Avoid potential division-by-zero in computing CS timestamp period
Since we use a HW readback or estimation of the CS timestamp frequency,
sometimes it may result in 0. Avoid the division-by-zero in computing
its reciprocal, the timestamp period.
Tvrtko Ursulin [Sun, 16 Feb 2020 13:36:20 +0000 (13:36 +0000)]
drm/i915: Track hw reported context runtime
GPU saves accumulated context runtime (in CS timestamp units) in PPHWSP
which will be useful for us in cases when we are not able to track context
busyness ourselves (like with GuC). Keep a copy of this in struct
intel_context from where it can be easily read even if the context is not
pinned.
v2:
(Chris)
* Do not store pphwsp address in intel_context.
* Log CS wrap-around.
* Simplify calculation by relying on integer wraparound.
v3:
* Include total/avg in traces and error state for debugging
Linus Torvalds [Sun, 16 Feb 2020 00:49:25 +0000 (16:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a few drivers have been updated to use flexible-array syntax instead
of GCC extension
- ili210x touchscreen driver now supports the 2120 protocol flavor
- a couple more of Synaptics devices have been switched over to RMI4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
Input: gpio_keys - replace zero-length array with flexible-array member
Input: goldfish_events - replace zero-length array with flexible-array member
Input: psmouse - switch to using i2c_new_scanned_device()
Input: ili210x - add ili2120 support
Input: ili210x - fix return value of is_visible function
Linus Torvalds [Sun, 16 Feb 2020 00:38:49 +0000 (16:38 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not too much going on here, though there are about four fixes related
to stuff merged during the last merge window.
We also see the return of a syzkaller instance with access to RDMA
devices, and a few bugs detected by that squished.
- Fix three crashers and a memory memory leak for HFI1
- Several bugs found by syzkaller
- A bug fix for the recent QP counters feature on older mlx5 HW
- Locking inversion in cxgb4
- Unnecessary WARN_ON in siw
- A umad crasher regression during unload, from a bug fix for
something else
- Bugs introduced in the merge window:
- Missed list_del in uverbs file rework, core and mlx5 devx
- Unexpected integer math truncation in the mlx5 VAR patches
- Compilation bug fix for the VAR patches on 32 bit"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Use div64_u64 for num_var_hw_entries calculation
RDMA/core: Fix protection fault in get_pkey_idx_qp_list
RDMA/rxe: Fix soft lockup problem due to using tasklets in softirq
RDMA/mlx5: Prevent overflow in mmap offset calculations
IB/umad: Fix kernel crash while unloading ib_umad
RDMA/mlx5: Fix async events cleanup flows
RDMA/core: Add missing list deletion on freeing event queue
RDMA/siw: Remove unwanted WARN_ON in siw_cm_llp_data_ready()
RDMA/iw_cxgb4: initiate CLOSE when entering TERM
IB/mlx5: Return failure when rts2rts_qp_counters_set_id is not supported
RDMA/core: Fix invalid memory access in spec_filter_size
IB/rdmavt: Reset all QPs when the device is shut down
IB/hfi1: Close window for pq and request coliding
IB/hfi1: Acquire lock to release TID entries when user file is closed
RDMA/hfi1: Fix memory leak in _dev_comp_vect_mappings_create
Linus Torvalds [Sat, 15 Feb 2020 21:10:38 +0000 (13:10 -0800)]
Merge tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Enable paes-s390 cipher selftests in testmgr (acked-by Herbert Xu).
- Fix protected key length update in PKEY_SEC2PROTK ioctl and increase
card/queue requests counter to 64-bit in crypto code.
- Fix clang warning in get_tod_clock.
- Fix ultravisor info length extensions handling.
- Fix style of SPDX License Identifier in vfio-ccw.
- Avoid unnecessary GFP_ATOMIC and simplify ACK tracking in qdio.
* tag 's390-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
crypto/testmgr: enable selftests for paes-s390 ciphers
s390/time: Fix clk type in get_tod_clock
s390/uv: Fix handling of length extensions
s390/qdio: don't allocate *aob array with GFP_ATOMIC
s390/qdio: simplify ACK tracking
s390/zcrypt: fix card and queue total counter wrap
s390/pkey: fix missing length of protected key on return
vfio-ccw: Use the correct style for SPDX License Identifier
Linus Torvalds [Sat, 15 Feb 2020 21:03:50 +0000 (13:03 -0800)]
Merge tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix compatible string typos in the xdpe12284 driver, and a wrong bit
value in the ltc2978 driver"
* tag 'hwmon-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/xdpe12284) fix typo in compatible strings
hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.
Linus Torvalds [Sat, 15 Feb 2020 20:51:22 +0000 (12:51 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes all over the place:
- Fix NUMA over-balancing between lightly loaded nodes. This is
fallout of the big load-balancer rewrite.
- Fix the NOHZ remote loadavg update logic, which fixes anomalies
like reported 150 loadavg on mostly idle CPUs.
- Fix XFS performance/scalability
- Fix throttled groups unbound task-execution bug
- Fix PSI procfs boundary condition
- Fix the cpu.uclamp.{min,max} cgroup configuration write checks
- Fix DocBook annotations
- Fix RCU annotations
- Fix overly CPU-intensive housekeeper CPU logic loop on large CPU
counts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix kernel-doc warning in attach_entity_load_avg()
sched/core: Annotate curr pointer in rq with __rcu
sched/psi: Fix OOB write when writing 0 bytes to PSI files
sched/fair: Allow a per-CPU kthread waking a task to stack on the same CPU, to fix XFS performance regression
sched/fair: Prevent unlimited runtime on throttled group
sched/nohz: Optimize get_nohz_timer_target()
sched/uclamp: Reject negative values in cpu_uclamp_write()
sched/fair: Allow a small load imbalance between low utilisation SD_NUMA domains
timers/nohz: Update NOHZ load in remote tick
sched/core: Don't skip remote tick for idle CPUs
Linus Torvalds [Sat, 15 Feb 2020 20:30:42 +0000 (12:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Fixes and HW enablement patches:
- Tooling fixes, most of which are tooling header synchronization
with v5.6 changes
- Fix kprobes fallout on ARM
- Add Intel Elkhart Lake support and extend Tremont support, these
are relatively simple and should only affect those models
- Fix the AMD family 17h generic event table"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers x86: Sync disabled-features.h
tools include UAPI: Sync sound/asound.h copy
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf tools: Add arm64 version of get_cpuid()
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers uapi: Sync linux/fscrypt.h with the kernel sources
tools headers UAPI: Sync sched.h with the kernel
perf trace: Resolve prctl's 'option' arg strings to numbers
perf beauty prctl: Export the 'options' strarray
tools headers UAPI: Sync prctl.h with the kernel sources
tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
perf maps: Move kmap::kmaps setup to maps__insert()
perf maps: Fix map__clone() for struct kmap
perf maps: Mark ksymbol DSOs with kernel type
perf maps: Mark module DSOs with kernel type
tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
...
Marek Behún [Sat, 15 Feb 2020 14:21:30 +0000 (15:21 +0100)]
bus: moxtet: fix potential stack buffer overflow
The input_read function declares the size of the hex array relative to
sizeof(buf), but buf is a pointer argument of the function. The hex
array is meant to contain hexadecimal representation of the bin array.
Ville Syrjälä [Thu, 13 Feb 2020 14:04:12 +0000 (16:04 +0200)]
drm/i915: Force state->modeset=true when distrust_bios_wm==true
Currently when we load the driver we set distrust_bios_wm=true, which
will cause active_pipe_changes to get flagged even when we're not
toggling any pipes on/off. The reason being that we want to fully
redistribute the dbuf among the active pipes and ignore whatever
state the firmware left behind.
Unfortunately when the code flags active_pipe_changes it doesn't
set state->modeset to true, which means the hardware dbuf state
won't actually get updated. Hence the hardware and software
states go out of sync, which can result in planes trying to use a
disabled dbuf slice. Suprisingly that only seems to corrupt the
display rather than making the whole display engine keel over.
Let's fix this for now by flagging state->modeset whenever
distrust_bios_wm is set.
Eventually we'll likely want to rip out all of this mess and
introduce proper statye tracking for dbuf. But that requires
more work. Toss in a FIXME to that effect.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: ff2cd8635e41 ("drm/i915: Correctly map DBUF slices to pipes") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-4-stanislav.lisovskiy@intel.com
Jani Nikula [Thu, 13 Feb 2020 14:04:11 +0000 (16:04 +0200)]
drm/i915/dsc: force full modeset whenever DSC is enabled at probe
We lack full state readout of DSC config, which may lead to DSC enable
using a config that's all zeros, failing spectacularly. Force full
modeset and thus compute config at probe to get a sane state, until we
implement DSC state readout. Any fastset that did appear to work with
DSC at probe, worked by coincidence. [1] is an example of a change that
triggered the issue on TGL DSI DSC.
drm/i915: Ensure no conflicts with BIOS when updating Dbuf
TGL BIOS seems to enable both DBuf slices ocasionally, depending
how many displays are connected, while i915 according to BSpec
was powering on S1 DBuf slice, until a modeset was done.
This was causing a brief flash during the boot as we were
disabling slice, previously used by BIOS with that.
To prevent this, now we are ensuring tht we are enabling
_at least_ one slice, but if there are more, let's not
power them off.
Theodore Ts'o [Fri, 14 Feb 2020 23:11:19 +0000 (18:11 -0500)]
ext4: improve explanation of a mount failure caused by a misconfigured kernel
If CONFIG_QFMT_V2 is not enabled, but CONFIG_QUOTA is enabled, when a
user tries to mount a file system with the quota or project quota
enabled, the kernel will emit a very confusing messsage:
EXT4-fs warning (device vdc): ext4_enable_quotas:5914: Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
EXT4-fs (vdc): mount failed
We will now report an explanatory message indicating which kernel
configuration options have to be enabled, to avoid customer/sysadmin
confusion.
drm/i915/mst: Set intel_dp_set_m_n() for MST slaves
Commit 1c9d2eb24153 ("drm/i915: move intel_dp_set_m_n() to encoder for
DDI platforms") moved the intel_dp_set_m_n() from hsw_crtc_enable()
to intel_ddi_pre_enable_dp() but it missed add it to
intel_mst_pre_enable_dp() causing MST slaves to not work.
v2: Not setting intel_ddi_set_dp_msa() twice for MST master
Fixes: 1c9d2eb24153 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211185008.30806-1-jose.souza@intel.com
Ingo Molnar [Sat, 15 Feb 2020 08:35:11 +0000 (09:35 +0100)]
Merge tag 'perf-urgent-for-mingo-5.6-20200214' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
BPF:
Arnaldo Carvalho de Melo:
- Fix script used to obtain kernel make directives to work with new kbuild
used for building BPF programs.
maps:
Jiri Olsa:
- Fixup kmap->kmaps backpointer in kernel maps.
arm64:
John Garry:
- Add arm64 version of get_cpuid() to get proper, arm64 specific output from
'perf list' and other tools.
perf top:
Kim Phillips:
- Update kernel idle symbols so that output in AMD systems is in line with
other systems.
perf stat:
Kim Phillips:
- Don't report a null stalled cycles per insn metric.
tools headers:
Arnaldo Carvalho de Melo:
- Sync tools/ headers with the kernel sources to get things like syscall
numbers and new arguments so that 'perf trace' can decode and use them in
tracepoint filters, e.g. prctl's new PR_{G,S}ET_IO_FLUSHER options.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Input: cyapa - replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
projects / kernel.git / log