Linus Torvalds [Sat, 6 Aug 2022 23:38:17 +0000 (16:38 -0700)]
Merge tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for syscall stack randomization
- Add support for atomic operations to the 32 & 64-bit BPF JIT
- Full support for KASAN on 64-bit Book3E
- Add a watchdog driver for the new PowerVM hypervisor watchdog
- Add a number of new selftests for the Power10 PMU support
- Add a driver for the PowerVM Platform KeyStore
- Increase the NMI watchdog timeout during live partition migration, to
avoid timeouts due to increased memory access latency
- Add support for using the 'linux,pci-domain' device tree property for
PCI domain assignment
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Andy Shevchenko, Arnd Bergmann, Athira
Rajeev, Bagas Sanjaya, Christophe Leroy, Erhard Furtner, Fabiano Rosas,
Greg Kroah-Hartman, Greg Kurz, Haowen Bai, Hari Bathini, Jason A.
Donenfeld, Jason Wang, Jiang Jian, Joel Stanley, Juerg Haefliger, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Masahiro Yamada,
Maxime Bizon, Miaoqian Lin, Murilo Opsfelder Araújo, Nathan Lynch,
Naveen N. Rao, Nayna Jain, Nicholas Piggin, Ning Qiang, Pali Rohár,
Petr Mladek, Rashmica Gupta, Sachin Sant, Scott Cheloha, Segher
Boessenkool, Stephen Rothwell, Uwe Kleine-König, Wolfram Sang, Xiu
Jianfeng, and Zhouyi Zhou.
* tag 'powerpc-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (191 commits)
powerpc/64e: Fix kexec build error
EDAC/ppc_4xx: Include required of_irq header directly
powerpc/pci: Fix PHB numbering when using opal-phbid
powerpc/64: Init jump labels before parse_early_param()
selftests/powerpc: Avoid GCC 12 uninitialised variable warning
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
powerpc/xive: Fix refcount leak in xive_get_max_prio
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
powerpc/perf: Include caps feature for power10 DD1 version
powerpc: add support for syscall stack randomization
powerpc: Move system_call_exception() to syscall.c
powerpc/powernv: rename remaining rng powernv_ functions to pnv_
powerpc/powernv/kvm: Use darn for H_RANDOM on Power9
powerpc/powernv: Avoid crashing if rng is NULL
selftests/powerpc: Fix matrix multiply assist test
powerpc/signal: Update comment for clarity
powerpc: make facility_unavailable_exception 64s
powerpc/platforms/83xx/suspend: Remove write-only global variable
powerpc/platforms/83xx/suspend: Prevent unloading the driver
powerpc/platforms/83xx/suspend: Reorder to get rid of a forward declaration
...
Linus Torvalds [Sat, 6 Aug 2022 22:04:48 +0000 (15:04 -0700)]
Merge tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
Linus Torvalds [Sat, 6 Aug 2022 21:48:54 +0000 (14:48 -0700)]
Merge tag '9p-for-5.20' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- a couple of fixes
- add a tracepoint for fid refcounting
- some cleanup/followup on fid lookup
- some cleanup around req refcounting
* tag '9p-for-5.20' of https://github.com/martinetd/linux:
net/9p: Initialize the iounit field during fid creation
net: 9p: fix refcount leak in p9_read_work() error handling
9p: roll p9_tag_remove into p9_req_put
9p: Add client parameter to p9_req_put()
9p: Drop kref usage
9p: Fix some kernel-doc comments
9p fid refcount: cleanup p9_fid_put calls
9p fid refcount: add a 9p_fid_ref tracepoint
9p fid refcount: add p9_fid_get/put wrappers
9p: Fix minor typo in code comment
9p: Remove unnecessary variable for old fids while walking from d_parent
9p: Make the path walk logic more clear about when cloning is required
9p: Track the root fid with its own variable during lookups
Linus Torvalds [Sat, 6 Aug 2022 21:44:49 +0000 (14:44 -0700)]
Merge tag 'gfs2-v5.19-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Instantiate glocks ouside of the glock state engine, in the contect
of the process taking the glock. This moves unnecessary complexity
out of the core glock code. Clean up the instantiate logic to be more
sensible.
- In gfs2_glock_async_wait(), cancel pending locking request upon
failure. Make sure all glocks are left in a consistent state.
- Various other minor cleanups and fixes.
* tag 'gfs2-v5.19-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: List traversal in do_promote is safe
gfs2: do_promote glock holder stealing fix
gfs2: Use better variable name
gfs2: Make go_instantiate take a glock
gfs2: Add new go_held glock operation
gfs2: Revert 'Fix "truncate in progress" hang'
gfs2: Instantiate glocks ouside of glock state engine
gfs2: Fix up gfs2_glock_async_wait
gfs2: Minor gfs2_glock_nq_m cleanup
gfs2: Fix spelling mistake in comment
gfs2: Rewrap overlong comment in do_promote
gfs2: Remove redundant NULL check before kfree
It turns out that it was hopelessly naive to think that this would work,
considering that we've always done this. The first machine I actually
tested this on broke at bootup, getting to
Reached target cryptsetup.target - Local Encrypted Volumes.
and then hanging. It's unclear what actually fails, since there's a lot
else going on around that time (eg amdgpu probing also happens around
that same time, but it could be some other random init thing that didn't
complete earlier and just caused the boot to hang at that point).
The expectations that we should default to some unsafe and untested mode
seems entirely unfounded, and the belief that this wouldn't affect
modern systems is clearly entirely false. The machine in question is
about two years old, so it's not exactly shiny, but it's also not some
dusty old museum piece PDP-11 in a closet.
Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: John Garry <john.garry@huawei.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 6 Aug 2022 18:09:55 +0000 (11:09 -0700)]
Merge tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull more device mapper updates from Mike Snitzer:
- Add flags argument to dm_bufio_client_create and introduce
DM_BUFIO_CLIENT_NO_SLEEP flag to have dm-bufio use spinlock rather
than mutex for its locking.
- Add optional "try_verify_in_tasklet" feature to DM verity target.
This feature gives users the option to improve IO latency by using a
tasklet to verify, using hashes in bufio's cache, rather than wait to
schedule a work item via workqueue. But if there is a bufio cache
miss, or an error, then the tasklet will fallback to using workqueue.
- Incremental changes to both dm-bufio and the DM verity target to use
jump_label to minimize cost of branching associated with the niche
"try_verify_in_tasklet" feature. DM-bufio in particular is used by
quite a few other DM targets so it doesn't make sense to incur
additional bufio cost in those targets purely for the benefit of this
niche verity feature if the feature isn't ever used.
- Optimize verity_verify_io, which is used by both workqueue and
tasklet based verification, if FEC is not configured or tasklet based
verification isn't used.
- Remove DM verity target's verify_wq's use of the WQ_CPU_INTENSIVE
flag since it uses WQ_UNBOUND. Also, use the WQ_HIGHPRI flag if
"try_verify_in_tasklet" is specified.
* tag 'for-6.0/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: have verify_wq use WQ_HIGHPRI if "try_verify_in_tasklet"
dm verity: remove WQ_CPU_INTENSIVE flag since using WQ_UNBOUND
dm verity: only copy bvec_iter in verity_verify_io if in_tasklet
dm verity: optimize verity_verify_io if FEC not configured
dm verity: conditionally enable branching for "try_verify_in_tasklet"
dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP
dm verity: allow optional args to alter primary args handling
dm verity: Add optional "try_verify_in_tasklet" feature
dm bufio: Add DM_BUFIO_CLIENT_NO_SLEEP flag
dm bufio: Add flags argument to dm_bufio_client_create
Linus Torvalds [Sat, 6 Aug 2022 17:56:45 +0000 (10:56 -0700)]
Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
Linus Torvalds [Sat, 6 Aug 2022 17:42:38 +0000 (10:42 -0700)]
Merge tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
* tag 'backlight-next-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
MAINTAINERS: Use Lee Jones' kernel.org address for Backlight submissions
backlight: lp855x: Switch to atomic PWM API
dt-bindings: backlight: Update Lee Jones' email address
Revert "drivers/video/backlight/platform_lcd.c: add support for device tree based probe"
backlight: rt4831: Apply ocp level from devicetree
dt-bindings: backlight: rt4831: Add the new ocp level property
* tag 'mfd-next-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits)
dt-bindings: mfd: stm32-timers: Move fixed string node names under 'properties'
dt-bindings: mfd: st,stm32-timers: Correct 'resets' property name
dt-bindings: mfd: syscon: Update Lee Jones' email address
MAINTAINERS: Use Lee Jones' kernel.org address for Syscon submissions
MAINTAINERS: Use Lee Jones' kernel.org address for MFD submissions
mfd: sun6i-prcm: Update Kconfig description
mfd: intel_soc_pmic_bxtwc: Fix spelling in the comment
mfd: intel_soc_pmic_bxtwc: Drop unneeded casting
mfd: intel_soc_pmic_bxtwc: Use sysfs_emit() instead of sprintf()
mfd: intel_soc_pmic_bxtwc: Use bits.h macros for all masks
mfd: intel_soc_pmic_bxtwc: Drop redundant ACPI_PTR()
mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct device
mfd: intel_soc_pmic_bxtwc: Use dev_err_probe()
mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata()
mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facility
mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store()
mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDs
mfd: mt6397: Add basic support for MT6331+MT6332 PMIC
mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cells
...
Linus Torvalds [Sat, 6 Aug 2022 17:19:51 +0000 (10:19 -0700)]
Merge tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
new drivers (as usual), while there have been some significant (but
almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't
notice, but on the devices with tons of control elements, it can be
visibly faster
- Support for input validation for controls; this will harden for
badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in
situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board
integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
ALSA: line6: Replace sprintf() with sysfs_emit()
ALSA: hda: Replace sprintf() with sysfs_emit()
ALSA: pcm: Replace sprintf() with sysfs_emit()
ALSA: core: Replace scnprintf() with sysfs_emit()
ALSA: control-led: Replace sprintf() with sysfs_emit()
ALSA: aoa: Replace sprintf() with sysfs_emit()
ALSA: ac97: Replace sprintf() with sysfs_emit()
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
ALSA: control: Use deferred fasync helper
ALSA: pcm: Use deferred fasync helper
ALSA: timer: Use deferred fasync helper
ALSA: core: Add async signal helpers
ASoC: q6asm: use kcalloc() instead of kzalloc()
ACPI: scan: Add CLSA0101 Laptop Support
ALSA: hda: cs35l41: Support CLSA0101
ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
ASoC: dt-bindings: use spi-peripheral-props.yaml
ASoC: codecs: va-macro: use fsgen as clock
...
Linus Torvalds [Sat, 6 Aug 2022 16:36:08 +0000 (09:36 -0700)]
Merge tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf lock contention' subtool, using new lock contention
tracepoints and using BPF for in kernel aggregation and then
userspace processing using the perf tooling infrastructure for
resolving symbols, target specification, etc.
Since the new lock contention tracepoints don't provide lock names,
get up to 8 stack traces and display the first non-lock function
symbol name as a caller:
update_blocked_a... 40 40 3.61 us 144.45 us
kernfs_fop_open+... 5 5 3.64 us 18.18 us
_nohz_idle_balance 3 3 2.65 us 7.95 us
tick_do_update_j... 1 1 6.04 us 6.04 us
ep_scan_ready_list 1 1 3.93 us 3.93 us
Supports the usual 'perf record' + 'perf report' workflow as well as
a BCC/bpftrace like mode where you start the tool and then press
control+C to get results:
$ sudo perf lock contention -b
^C
contended total wait max wait avg wait type caller
42 192.67 us 13.64 us 4.59 us spinlock queue_work_on+0x20
23 85.54 us 10.28 us 3.72 us spinlock worker_thread+0x14a
6 13.92 us 6.51 us 2.32 us mutex kernfs_iop_permission+0x30
3 11.59 us 10.04 us 3.86 us mutex kernfs_dop_revalidate+0x3c
1 7.52 us 7.52 us 7.52 us spinlock kthread+0x115
1 7.24 us 7.24 us 7.24 us rwlock:W sys_epoll_wait+0x148
2 7.08 us 3.99 us 3.54 us spinlock delayed_work_timer_fn+0x1b
1 6.41 us 6.41 us 6.41 us spinlock idle_balance+0xa06
2 2.50 us 1.83 us 1.25 us mutex kernfs_iop_lookup+0x2f
1 1.71 us 1.71 us 1.71 us mutex kernfs_iop_getattr+0x2c
...
- Add new 'perf kwork' tool to trace time properties of kernel work
(such as softirq, and workqueue), uses eBPF skeletons to collect info
in kernel space, aggregating data that then gets processed by the
userspace tool, e.g.:
# perf kwork report
Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end |
----------------------------------------------------------------------------------------------------
nvme0q5:130 | 004 | 1.101 ms | 49 | 0.051 ms | 26035.056403 s | 26035.056455 s |
amdgpu:162 | 002 | 0.176 ms | 9 | 0.046 ms | 26035.268020 s | 26035.268066 s |
nvme0q24:149 | 023 | 0.161 ms | 55 | 0.009 ms | 26035.655280 s | 26035.655288 s |
nvme0q20:145 | 019 | 0.090 ms | 33 | 0.014 ms | 26035.939018 s | 26035.939032 s |
nvme0q31:156 | 030 | 0.075 ms | 21 | 0.010 ms | 26035.052237 s | 26035.052247 s |
nvme0q8:133 | 007 | 0.062 ms | 12 | 0.021 ms | 26035.416840 s | 26035.416861 s |
nvme0q6:131 | 005 | 0.054 ms | 22 | 0.010 ms | 26035.199919 s | 26035.199929 s |
nvme0q19:144 | 018 | 0.052 ms | 14 | 0.010 ms | 26035.110615 s | 26035.110625 s |
nvme0q7:132 | 006 | 0.049 ms | 13 | 0.007 ms | 26035.125180 s | 26035.125187 s |
nvme0q18:143 | 017 | 0.033 ms | 14 | 0.007 ms | 26035.169698 s | 26035.169705 s |
nvme0q17:142 | 016 | 0.013 ms | 1 | 0.013 ms | 26035.565147 s | 26035.565160 s |
enp5s0-rx-0:164 | 006 | 0.004 ms | 4 | 0.002 ms | 26035.928882 s | 26035.928884 s |
enp5s0-tx-0:166 | 008 | 0.003 ms | 3 | 0.002 ms | 26035.870923 s | 26035.870925 s |
--------------------------------------------------------------------------------------------------------
See commit log messages for more examples with extra options to limit
the events time window, etc.
- Add support for new AMD IBS (Instruction Based Sampling) features:
With the DataSrc extensions, the source of data can be decoded among:
- Local L3 or other L1/L2 in CCX.
- A peer cache in a near CCX.
- Data returned from DRAM.
- A peer cache in a far CCX.
- DRAM address map with "long latency" bit set.
- Data returned from MMIO/Config/PCI/APIC.
- Extension Memory (S-Link, GenZ, etc - identified by the CS target
and/or address map at DF's choice).
- Peer Agent Memory.
- Support hardware tracing with Intel PT on guest machines, combining
the traces with the ones in the host machine.
- Add a "-m" option to 'perf buildid-list' to show kernel and modules
build-ids, to display all of the information needed to do external
symbolization of kernel stack traces, such as those collected by
bpf_get_stackid().
- Add arch TSC frequency information to perf.data file headers.
- Handle changes in the binutils disassembler function signatures in
perf, bpftool and bpf_jit_disasm (Acked by the bpftool maintainer).
- Fix building the perf perl binding with the newest gcc in distros
such as fedora rawhide, where some new warnings were breaking the
build as perf uses -Werror.
- Add 'perf test' entry for branch stack sampling.
- Add ARM SPE system wide 'perf test' entry.
- Add user space counter reading tests to 'perf test'.
- Build with python3 by default, if available.
- Add python converter script for the vendor JSON event files.
- Update vendor JSON files for most Intel cores.
- Add vendor JSON File for Intel meteorlake.
- Add Arm Cortex-A78C and X1C JSON vendor event files.
- Add workaround to symbol address reading from ELF files without phdr,
falling back to the previoous equation.
- Convert legacy map definition to BTF-defined in the perf BPF script
test.
- Rework prologue generation code to stop using libbpf deprecated APIs.
- Add default hybrid events for 'perf stat' on x86.
- Add topdown metrics in the default 'perf stat' on the hybrid machines
(big/little cores).
- Prefer sampled CPU when exporting JSON in 'perf data convert'
- Fix ('perf stat CSV output linter') and ("Check branch stack
sampling") 'perf test' entries on s390.
* tag 'perf-tools-for-v6.0-2022-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf stat: Refactor __run_perf_stat() common code
perf lock: Print the number of lost entries for BPF
perf lock: Add --map-nr-entries option
perf lock: Introduce struct lock_contention
perf scripting python: Do not build fail on deprecation warnings
genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO
perf build: Suppress openssl v3 deprecation warnings in libcrypto feature test
perf parse-events: Break out tracepoint and printing
perf parse-events: Don't #define YY_EXTRA_TYPE
tools bpftool: Don't display disassembler-four-args feature test
tools bpftool: Fix compilation error with new binutils
tools bpf_jit_disasm: Don't display disassembler-four-args feature test
tools bpf_jit_disasm: Fix compilation error with new binutils
tools perf: Fix compilation error with new binutils
tools include: add dis-asm-compat.h to handle version differences
tools build: Don't display disassembler-four-args feature test
tools build: Add feature test for init_disassemble_info API changes
perf test: Add ARM SPE system wide test
perf tools: Rework prologue generation code
perf bpf: Convert legacy map definition to BTF-defined
...
Linus Torvalds [Sat, 6 Aug 2022 16:19:42 +0000 (09:19 -0700)]
Merge tag 'livepatching-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Make a selftest more reliable
* tag 'livepatching-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: better synchronize test_klp_callbacks_busy
Linus Torvalds [Sat, 6 Aug 2022 15:59:35 +0000 (08:59 -0700)]
Merge tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Cleanup use of extern in function prototypes (Alex Williamson)
- Simplify bus_type usage and convert to device IOMMU interfaces (Robin
Murphy)
- Check missed return value and fix comment typos (Bo Liu)
- Split migration ops from device ops and fix races in mlx5 migration
support (Yishai Hadas)
- Fix missed return value check in noiommu support (Liam Ni)
- Hardening to clear buffer pointer to avoid use-after-free (Schspa
Shi)
- Remove requirement that only the same mm can unmap a previously
mapped range (Li Zhe)
- Adjust semaphore release vs device open counter (Yi Liu)
- Remove unused arg from SPAPR support code (Deming Wang)
- Rework vfio-ccw driver to better fit new mdev framework (Eric Farman,
Michael Kawano)
- Replace DMA unmap notifier with callbacks (Jason Gunthorpe)
- Clarify SPAPR support comment relative to iommu_ops (Alexey
Kardashevskiy)
- Revise page pinning API towards compatibility with future iommufd
support (Nicolin Chen)
- Resolve issues in vfio-ccw, including use of DMA unmap callback (Eric
Farman)
* tag 'vfio-v6.0-rc1' of https://github.com/awilliam/linux-vfio: (40 commits)
vfio/pci: fix the wrong word
vfio/ccw: Check return code from subchannel quiesce
vfio/ccw: Remove FSM Close from remove handlers
vfio/ccw: Add length to DMA_UNMAP checks
vfio: Replace phys_pfn with pages for vfio_pin_pages()
vfio/ccw: Add kmap_local_page() for memcpy
vfio: Rename user_iova of vfio_dma_rw()
vfio/ccw: Change pa_pfn list to pa_iova list
vfio/ap: Change saved_pfn to saved_iova
vfio: Pass in starting IOVA to vfio_pin/unpin_pages API
vfio/ccw: Only pass in contiguous pages
vfio/ap: Pass in physical address of ind to ap_aqic()
drm/i915/gvt: Replace roundup with DIV_ROUND_UP
vfio: Make vfio_unpin_pages() return void
vfio/spapr_tce: Fix the comment
vfio: Replace the iommu notifier with a device list
vfio: Replace the DMA unmapping notifier with a callback
vfio/ccw: Move FSM open/close to MDEV open/close
vfio/ccw: Refactor vfio_ccw_mdev_reset
vfio/ccw: Create a CLOSE FSM event
...
Linus Torvalds [Fri, 5 Aug 2022 23:32:45 +0000 (16:32 -0700)]
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
Linus Torvalds [Fri, 5 Aug 2022 21:13:45 +0000 (14:13 -0700)]
Merge tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- Dynamic partition support
- Fix deadlock in sm_ftl
- Various refcount fixes in maps, partitions and parser code
- Integer overflow fixes in mtdchar
- Support for Sercomm partitions
NAND driver changes:
- Clockrate fix for arasan
- Add ATO25D1GA support
- Double free fix for meson driver
- Fix probe/remove methods in cafe NAND
- Support unprotected spare data pages in qcom_nandc
SPI NOR core changes:
- move SECT_4K_PMC flag out of the core as it's a vendor specific
flag
- s/addr_width/addr_nbytes/g: address width means the number of IO
lines used for the address, whereas in the code it is used as the
number of address bytes.
- do not change nor->addr_nbytes at SFDP parsing time. At the SFDP
parsing time we should not change members of struct spi_nor, but
instead fill members of struct spi_nor_flash_parameters which could
later on be used by the callers.
- track flash's internal address mode so that we can use 4B opcodes
together with opcodes that don't have a 4B opcode correspondent.
SPI NOR manufacturer drivers changes:
- esmt: Rename "f25l32qa" flash name to "f25l32qa-2s".
- micron-st: Skip FSR reading if SPI controller does not support it
to allow flashes that support FSR to work even when attached to
such SPI controllers.
- spansion: Add s25hl-t/s25hs-t IDs and fixups"
* tag 'mtd/for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (53 commits)
mtd: core: check partition before dereference
mtd: spi-nor: fix spi_nor_spimem_setup_op() call in spi_nor_erase_{sector,chip}()
mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
mtd: spi-nor: spansion: Add local function to discover page size
mtd: spi-nor: core: Track flash's internal address mode
mtd: spi-nor: core: Return error code from set_4byte_addr_mode()
mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing time
mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytes
mtd: spi-nor: s/addr_width/addr_nbytes
mtd: spi-nor: esmt: Use correct name of f25l32qa
mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support it
MAINTAINERS: Use my kernel.org email
mtd: rawnand: arasan: Fix clock rate in NV-DDR
mtd: rawnand: arasan: Update NAND bus clock instead of system clock
mtd: core: introduce of support for dynamic partitions
dt-bindings: mtd: partitions: add additional example for qcom,smem-part
dt-bindings: mtd: partitions: support label/name only partition
mtd: spi-nor: move SECT_4K_PMC special handling
mtd: dataflash: Add SPI ID table
mtd: hyperbus: rpc-if: Fix RPM imbalance in probe error path
...
Linus Torvalds [Fri, 5 Aug 2022 21:03:11 +0000 (14:03 -0700)]
Merge tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- KASAN support for x86_64
- noreboot command line option, just like qemu's -no-reboot
- Various fixes and cleanups
* tag 'for-linus-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: include sys/types.h for size_t
um: Replace to_phys() and to_virt() with less generic function names
um: Add missing apply_returns()
um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups
um: include linux/stddef.h for __always_inline
UML: add support for KASAN under x86_64
mm: Add PAGE_ALIGN_DOWN macro
um: random: Don't initialise hwrng struct with zero
um: remove unused mm_copy_segments
um: remove unused variable
um: Remove straying parenthesis
um: x86: print RIP with symbol
arch: um: Fix build for statically linked UML w/ constructors
x86/um: Kconfig: Fix indentation
um/drivers: Kconfig: Fix indentation
um: Kconfig: Fix indentation
Linus Torvalds [Fri, 5 Aug 2022 20:59:38 +0000 (13:59 -0700)]
Merge tag 'for-linus' of github.com:openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"In this cycle we add PCI support to OpenRISC used in our new QEMU virt
platform.
The main updates from me include:
- Kconfig updates to support OpenRISC PCI (just config now after the
PCI cleanups I did on Bjorn's branch)
- A new defconfig for the qemu virt platform.
- Also there is one MAINTAINERS update. As I was working on the PCI
series we kept getting bounces from Richard's old email address. I
added this here; I am not sure how these are usually handled when
the maintainer doesn't queue it themselves"
* tag 'for-linus' of github.com:openrisc/linux:
openrisc: io: Define iounmap argument as volatile
MAINTAINERS: Update Richard Henderson's address
openrisc: Add virt defconfig
openrisc: Add pci bus support
Linus Torvalds [Fri, 5 Aug 2022 17:47:40 +0000 (10:47 -0700)]
Merge tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX updates from Dave Hansen:
"A set of x86/sgx changes focused on implementing the "SGX2" features,
plus a minor cleanup:
- SGX2 ISA support which makes enclave memory management much more
dynamic. For instance, enclaves can now change enclave page
permissions on the fly.
- Removal of an unused structure member"
* tag 'x86_sgx_for_v6.0-2022-08-03.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/sgx: Drop 'page_index' from sgx_backing
selftests/sgx: Page removal stress test
selftests/sgx: Test reclaiming of untouched page
selftests/sgx: Test invalid access to removed enclave page
selftests/sgx: Test faulty enclave behavior
selftests/sgx: Test complete changing of page type flow
selftests/sgx: Introduce TCS initialization enclave operation
selftests/sgx: Introduce dynamic entry point
selftests/sgx: Test two different SGX2 EAUG flows
selftests/sgx: Add test for TCS page permission changes
selftests/sgx: Add test for EPCM permission changes
Documentation/x86: Introduce enclave runtime management section
x86/sgx: Free up EPC pages directly to support large page ranges
x86/sgx: Support complete page removal
x86/sgx: Support modifying SGX page type
x86/sgx: Tighten accessible memory range after enclave initialization
x86/sgx: Support adding of pages to an initialized enclave
x86/sgx: Support restricting of enclave page permissions
x86/sgx: Support VA page allocation without reclaiming
x86/sgx: Export sgx_encl_page_alloc()
...
Linus Torvalds [Fri, 5 Aug 2022 17:07:23 +0000 (10:07 -0700)]
Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
Linus Torvalds [Fri, 5 Aug 2022 17:02:33 +0000 (10:02 -0700)]
Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These updates came in after I had already tagged the branches, but
they still seem appropriate for 6.0 and most of them were part of
linux-next through other trees.
- The reset controller tree adds one new driver for the TI TPS380x
power management chip and a few minor changes in other drivers
- Apple M1 now has a DT entry for the NVMe controller after the
driver was merged, and has a new mailing list in the MAINTAINERS
file.
- Fixes for USB on the Socionext Uniphier platforms and the network
controller on Intel Cyclone5"
* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
arm64: dts: apple: t8103: Add ANS2 NVMe nodes
reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
reset: tps380x: Add TPS380x device driver supprt
dt-bindings: reset: Add TPS380x documentation
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
ARM: dts: add EMAC AXI settings for Cyclone5
reset: reset-simple should depends on HAS_IOMEM
Revert "reset: microchip-sparx5: allow building as a module"
reset: a10sr: allow building under COMPILE_TEST
reset: allow building of reset simple driver if expert config selected
reset: microchip-sparx5: allow building as a module
arm64: dts: apple: Re-parent ANS2 power domains
MAINTAINERS: add ARM/APPLE MACHINE mailing list
Linus Torvalds [Fri, 5 Aug 2022 16:58:58 +0000 (09:58 -0700)]
Merge tag 'for-5.20/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"One real bugfix to change the io_pgetevents_time64() syscall to use
the compat implementation when running in compat mode, otherwise the
signed int32 parameters min_nr and nr will be incorrectly handled as
unsigned int64 values.
Other than that just small cleanups:
- hardware database housekeeping and proper /proc/iomem output
- add proper function exit code if probe functions fail
- drop stale variables (pa_swapper_pg_lock)
- drop unneccessary zero-initializations
- typo fixes in comments"
* tag 'for-5.20/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
Input: gscps2 - check return value of ioremap() in gscps2_probe()
parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
parisc: Drop zero variable initialisations in mm/init.c
parisc: Do not initialise statics to 0
parisc: Check the return value of ioremap() in lba_driver_probe()
parisc: Drop pa_swapper_pg_lock spinlock
parisc: Fix comment typo in fault.c
parisc: Fix device names in /proc/iomem
parisc: Clean up names in hardware database
Linus Torvalds [Fri, 5 Aug 2022 16:56:51 +0000 (09:56 -0700)]
Merge tag 'microblaze-v5.20' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Trivial comment fix
- Remove HANDLE_DOMAIN_IRQ selection
* tag 'microblaze-v5.20' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix some typos in comment
arch: microblaze: Remove unused "select HANDLE_DOMAIN_IRQ"
Linus Torvalds [Fri, 5 Aug 2022 16:54:36 +0000 (09:54 -0700)]
Merge tag 'printk-for-5.20-sane' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow reading kernel log in gdb even on 32 bits systems
- More granular check of the buffer usage in printf selftest
- Clang warning fix
* tag 'printk-for-5.20-sane' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/test_printf.c: fix clang -Wformat warnings
scripts/gdb: fix 'lx-dmesg' on 32 bits arch
lib/test_printf.c: split write-beyond-buffer check in two
Linus Torvalds [Fri, 5 Aug 2022 16:41:12 +0000 (09:41 -0700)]
Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
Linus Torvalds [Fri, 5 Aug 2022 16:35:46 +0000 (09:35 -0700)]
Merge tag 'trace-rtla-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull real time analysis tool (rtla) updates from Steven Rostedt:
- Fix a double free
- Define syscall numbers for RISCV
- Fix Makefile when called from -C tools
- Use calloc() to check for memory allocation failures
* tag 'trace-rtla-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
rtla: Define syscall numbers for riscv
rtla: Fix double free
rtla: Fix Makefile when called from -C tools/
rtla/utils: Use calloc and check the potential memory allocation failure
Linus Torvalds [Fri, 5 Aug 2022 03:19:16 +0000 (20:19 -0700)]
Merge tag 'xfs-5.20-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"The biggest changes for this release are the log scalability
improvements, lockless lookups for the buffer cache, and making the
attr fork a permanent part of the incore inode in preparation for
directory parent pointers.
There's also a bunch of bug fixes that have accumulated since -rc5. I
might send you a second pull request with some more bug fixes that I'm
still working on.
Once the merge window ends, I will hand maintainership back to Dave
Chinner until the 6.1-rc1 release so that I can conduct the design
review for the online fsck feature, and try to get it merged.
Summary:
- Improve scalability of the XFS log by removing spinlocks and global
synchronization points.
- Add security labels to whiteout inodes to match the other
filesystems.
- Clean up per-ag pointer passing to simplify call sites.
- Reduce verifier overhead by precalculating more AG geometry.
- Implement fast-path lockless lookups in the buffer cache to reduce
spinlock hammering.
- Make attr forks a permanent part of the inode structure to fix a
UAF bug and because most files these days tend to have security
labels and soon will have parent pointers too.
- Clean up XFS_IFORK_Q usage and give it a better name.
- Fix more UAF bugs in the xattr code.
- SOB my tags.
- Fix some typos in the timestamp range documentation.
- Fix a few more memory leaks.
- Code cleanups and typo fixes.
- Fix an unlocked inode fork pointer access in getbmap"
* tag 'xfs-5.20-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (61 commits)
xfs: delete extra space and tab in blank line
xfs: fix NULL pointer dereference in xfs_getbmap()
xfs: Fix typo 'the the' in comment
xfs: Fix comment typo
xfs: don't leak memory when attr fork loading fails
xfs: fix for variable set but not used warning
xfs: xfs_buf cache destroy isn't RCU safe
xfs: delete unnecessary NULL checks
xfs: fix comment for start time value of inode with bigtime enabled
xfs: fix use-after-free in xattr node block inactivation
xfs: lockless buffer lookup
xfs: remove a superflous hash lookup when inserting new buffers
xfs: reduce the number of atomic when locking a buffer after lookup
xfs: merge xfs_buf_find() and xfs_buf_get_map()
xfs: break up xfs_buf_find() into individual pieces
xfs: add in-memory iunlink log item
xfs: add log item precommit operation
xfs: combine iunlink inode update functions
xfs: clean up xfs_iunlink_update_inode()
xfs: double link the unlinked inode list
...
Linus Torvalds [Fri, 5 Aug 2022 03:13:46 +0000 (20:13 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Add new ioctls to set and get the file system UUID in the ext4
superblock and improved the performance of the online resizing of file
systems with bigalloc enabled.
Fixed a lot of bugs, in particular for the inline data feature,
potential races when creating and deleting inodes with shared extended
attribute blocks, and the handling of directory blocks which are
corrupted"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (37 commits)
ext4: add ioctls to get/set the ext4 superblock uuid
ext4: avoid resizing to a partial cluster size
ext4: reduce computation of overhead during resize
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
ext4: block range must be validated before use in ext4_mb_clear_bb()
mbcache: automatically delete entries from cache on freeing
mbcache: Remove mb_cache_entry_delete()
ext2: avoid deleting xattr block that is being reused
ext2: unindent codeblock in ext2_xattr_set()
ext2: factor our freeing of xattr block reference
ext4: fix race when reusing xattr blocks
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: remove EA inode entry from mbcache on inode eviction
mbcache: add functions to delete entry if unused
mbcache: don't reclaim used entries
ext4: make sure ext4_append() always allocates new block
ext4: check if directory block is within i_size
ext4: reflect mb_optimize_scan value in options file
ext4: avoid remove directory when directory is corrupted
ext4: aligned '*' in comments
...
Linus Torvalds [Fri, 5 Aug 2022 03:00:14 +0000 (20:00 -0700)]
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
Linus Torvalds [Fri, 5 Aug 2022 02:54:32 +0000 (19:54 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This cycle we got a new RDMA driver "ERDMA" for the Alibaba cloud
environment. Otherwise the changes are dominated by rxe fixes.
There is another RDMA driver on the list that might get merged next
cycle, 'MANA' for the Azure cloud environment.
Summary:
- Bug fixes and small features for irdma, hns, siw, qedr, hfi1, mlx5
- General spelling/grammer fixes
- rdma cm can follow changes in neighbours for control packets
- Significant amounts of rxe fixes and spec compliance changes
- Use the modern NAPI API
- Use the bitmap API instead of open coding
- Performance improvements for rtrs
- Add the ERDMA driver for Alibaba cloud
- Fix a use after free bug in SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/ib_srpt: Unify checking rdma_cm_id condition in srpt_cm_req_recv()
RDMA/rxe: Fix error unwind in rxe_create_qp()
RDMA/mlx5: Add missing check for return value in get namespace flow
RDMA/rxe: Split qp state for requester and completer
RDMA/rxe: Generate error completion for error requester QP state
RDMA/rxe: Update wqe_index for each wqe error completion
RDMA/srpt: Fix a use-after-free
RDMA/srpt: Introduce a reference count in struct srpt_device
RDMA/srpt: Duplicate port name members
IB/qib: Fix repeated "in" within comments
RDMA/erdma: Add driver to kernel build environment
RDMA/erdma: Add the ABI definitions
RDMA/erdma: Add the erdma module
RDMA/erdma: Add connection management (CM) support
RDMA/erdma: Add verbs implementation
RDMA/erdma: Add verbs header file
RDMA/erdma: Add event queue implementation
RDMA/erdma: Add cmdq implementation
RDMA/erdma: Add main include file
RDMA/erdma: Add the hardware related definitions
...
Linus Torvalds [Fri, 5 Aug 2022 02:47:37 +0000 (19:47 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
Linus Torvalds [Fri, 5 Aug 2022 02:41:09 +0000 (19:41 -0700)]
Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for the asynchronous SDIO wakeup interrupts
- Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap
- Add support to store error stats from host drivers
- Extend debugfs to show error stats from host drivers
- Add single I/O read support in the recovery path for 4k sector cards
MMC host:
- dw_mmc-exynos: Convert corresponding DT bindings to the dtschema
- dw_mmc-rockchip: Add support for the Rockchip RV1126 variant
- mmc_spi: Convert corresponding DT bindings to the dtschema
- mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode
- mtk-sd: Add support for SDIO wake irqs
- mtk-sd: Add support for the Mediatek MT8188 variant
- renesas_sdhi: Drop redundant manual tap correction for newer SoCs
- renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants
- sdhci/cqhci: Add support to capture stats from host errors
- sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0
- sdhci-msm: Add support for the MSM8998 and SM8450 variant
- sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R
- sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant
- sdhci-of-dwcmshc: Enable reset support for the Rockchip variants
- sdhci-pci-gli: Improve I/O read/write performance for GL9763E
- sdhci-s3c: Convert corresponding DT bindings to the dtschema
- tmio: Avoid glitches when resetting
MEMSTICK core:
- A couple of minor fixes and cleanups"
* tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits)
mmc: mediatek: add support for SDIO eint wakup IRQ
mmc: core: Add support for SDIO wakeup interrupt
dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126
mmc: renesas_sdhi: newer SoCs don't need manual tap correction
mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
mmc: cavium-octeon: Add of_node_put() when breaking out of loop
mmc: core: quirks: Add of_node_put() when breaking out of loop
mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume
dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible
mmc: sdhci-msm: drop redundant of_device_id entries
dt-bindings: mmc: sdhci-msm: add MSM8998
mmc: block: Add single read for 4k sector cards
mmc: mxcmmc: Use mmc_card_sdio macro
mmc: core: Use mmc_card_* macro and add a new for the sd_combo type
dt-bindings: mmc: sdhci-msm: constrain reg-names per variants
dt-bindings: mmc: sdhci-msm: fix reg-names entries
dt-bindings: mmc: Add compatible for MediaTek MT8188
dt-bindings: mmc: sdhci-msm: document resets
mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
...
Linus Torvalds [Fri, 5 Aug 2022 02:30:35 +0000 (19:30 -0700)]
Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Consolidate duplicated 'next function' scanning and extend to allow
'isolated functions' on s390, similar to existing hypervisors
(Niklas Schnelle)
Resource management:
- Implement pci_iobar_pfn() for sparc, which allows us to remove the
sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().
This removes the ability to map the entire PCI I/O space using
/proc/bus/pci, but we believe that's already been broken since
v2.6.28 (Arnd Bergmann)
- Move common PCI definitions to asm-generic/pci.h and rework others
to be be more specific and more encapsulated in arches that need
them (Stafford Horne)
Power management:
- Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)
Virtualization:
- Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
the functions but don't advertise an ACS capability (Pavan Chebbi)
Error handling:
- Clear PCI Status register during enumeration in case firmware left
errors logged (Kai-Heng Feng)
- When we have native control of AER, enable error reporting for all
devices that support AER. Previously only a few drivers enabled
this (Stefan Roese)
- Keep AER error reporting enabled for switches. Previously we
enabled this during enumeration but immediately disabled it (Stefan
Roese)
- Iterate over error counters instead of error strings to avoid
printing junk in AER sysfs counters (Mohamed Khalfella)
ASPM:
- Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
via sysfs, are not lost across power state changes (Kai-Heng Feng)
Endpoint framework:
- Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)
Endpoint embedded DMA controller driver:
- Simplify and clean up support for the DesignWare embedded DMA
(eDMA) controller (Frank Li, Serge Semin)
Broadcom STB PCIe controller driver:
- Avoid config space accesses when link is down because we can't
recover from the CPU aborts these cause (Jim Quinlan)
- Look for power regulators described under Root Ports in DT and
enable them before scanning the secondary bus (Jim Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Simplify and clean up clock and PHY management (Richard Zhu)
- Disable/enable regulators in suspend/resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
- Make link being down a non-fatal error so controller probe doesn't
fail if there are no Endpoints connected (Richard Zhu)
Loongson PCIe controller driver:
- Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)
- Avoid config reads to non-existent LS2K/LS7A devices because a
hardware defect causes machine hangs (Huacai Chen)
- Work around LS7A integrated devices that report incorrect Interrupt
Pin values (Jianmin Lv)
Marvell Aardvark PCIe controller driver:
- Add support for AER and Slot capability on emulated bridge (Pali
Rohár)
MediaTek PCIe controller driver:
- Add Airoha EN7532 to DT binding (John Crispin)
- Allow building of driver for ARCH_AIROHA (Felix Fietkau)
MediaTek PCIe Gen3 controller driver:
- Print decoded LTSSM state when the link doesn't come up (Jianjun
Wang)
NVIDIA Tegra194 PCIe controller driver:
- Convert DT binding to json-schema (Vidya Sagar)
- Add DT bindings and driver support for Tegra234 Root Port and
Endpoint mode (Vidya Sagar)
- Fix some Root Port interrupt handling issues (Vidya Sagar)
- Set default Max Payload Size to 256 bytes (Vidya Sagar)
- Fix Data Link Feature capability programming (Vidya Sagar)
- Extend Endpoint mode support to devices beyond Controller-5 (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Rework clock, reset, PHY power-on ordering to avoid hangs and
improve consistency (Robert Marko, Christian Marangi)
- Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)
- Add IPQ60xx support (Selvam Sathappan Periakaruppan)
- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)
- Add support for more than 32 MSI interrupts (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Convert DT binding to json-schema (Herve Codina)
- Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
(Herve Codina)
Samsung Exynos PCIe controller driver:
- Fix phy-exynos-pcie driver so it follows the 'phy_init() before
phy_power_on()' PHY programming model (Marek Szyprowski)
Synopsys DesignWare PCIe controller driver:
- Simplify and clean up the DWC core extensively (Serge Semin)
- Fix an issue with programming the ATU for regions that cross a 4GB
boundary (Serge Semin)
- Enable the CDM check if 'snps,enable-cdm-check' exists; previously
we skipped it if 'num-lanes' was absent (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit
address (Will McVicker)
- Add DWC core support for more than 32 MSI interrupts (Dmitry
Baryshkov)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port
(Bharat Kumar Gogada)"
* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
...
Linus Torvalds [Fri, 5 Aug 2022 01:44:38 +0000 (18:44 -0700)]
Merge tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support / Core:
- Remove DMA_MEMCPY_SG for lack of users
- Tegra 234 dmaengine support
- Mediatek MT8365 dma support
- Apple ADMAC driver
Updates:
- Yaml conversion for ST-Ericsson DMA40 binding and Freescale edma
- rz-dmac updates and device_synchronize support
- Bunch of typo in comments fixes in drivers
- multithread support in sf-pdma driver"
* tag 'dmaengine-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (50 commits)
dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in comment
dmaengine: axi-dmac: check cache coherency register
dmaengine: sh: rz-dmac: Add device_synchronize callback
dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
dmaengine: tegra: Add terminate() for Tegra234
dt-bindings: dmaengine: Add compatible for Tegra234
dmaengine: xilinx: use strscpy to replace strlcpy
dmaengine: imx-sdma: Add FIFO stride support for multi FIFO script
dmaengine: idxd: Correct IAX operation code names
dmaengine: imx-dma: Cast of_device_get_match_data() with (uintptr_t)
dmaengine: dw-axi-dmac: ignore interrupt if no descriptor
dmaengine: dw-axi-dmac: do not print NULL LLI during error
dmaengine: altera-msgdma: Fixed some inconsistent function name descriptions
dmaengine: imx-sdma: Add missing struct documentation
dmaengine: sf-pdma: Add multithread support for a DMA channel
dt-bindings: dma: dw-axi-dmac: extend the number of interrupts
dmaengine: dmatest: use strscpy to replace strlcpy
dmaengine: ste_dma40: fix typo in comment
dmaengine: jz4780: fix typo in comment
dmaengine: s3c24xx: fix typo in comment
...
Linus Torvalds [Fri, 5 Aug 2022 01:40:08 +0000 (18:40 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The clk core gains a new set of APIs that allow drivers to both
acquire clks and prepare and enable them at the same time. This also
comes with devm support so that drivers can make a single call to get
and prepare and enable the clk and have that all undone when their
driver is removed.
Many folks have requested this feature over the years, but we've had
disagreements about how to implement it and if it was worthwhile to
encourage drivers to use such an API.
Now it's here, so let's see how it goes.
I hope that by introducing this API we can identify drivers that would
benefit from further consolidation of clk API usage, possibly by
moving such logic to the bus layer and out of drivers altogether.
Outside of that major API update, we have the usual collection of
driver updates. A few new SoCs are supported, mostly Qualcomm and
Renesas this time around. Then we have the long tail of non-critical
fixes and minor feature additions to various clk drivers.
And finally more clk provider migration to struct clk_parent_data,
reducing boot times in the process.
Summary:
Core:
- devm helpers for clk_get() + clk_prepare() and clk_enable()
New Drivers:
- Support for the camera clock controller in Qualcomm SM8450 and the
display and gpu clock controllers in Qualcomm SM8350
- Add support for the Renesas RZ/Five SoC
Updates:
- Various fixes, new clocks and USB GDSCs are introduced for Qualcomm
IPQ8074
- Fixes to Qualcomm MSM8939 for issues introduced by inheriting the
MSM8916 GCC driver
- Support for a new type of voteable GDSCs used by Qualcomm SC8280XP
PCIe GDSCs
- Qualcomm SC8280XP pipe clocks transitioned to the new phy-mux
implementation
- Qualcomm MSM8996 GCC, RPM clock driver and some clocks in MSM8994
GCC are migrated to use clk_parent_data
- Corrected the topology for Titan (camera) GDSCs on Qualcomm SDM845
and SM8250
- Qualcomm MSM8916 gains more possible frequencies for its GP clocks.
- The GCC and tsens handling on Qualcomm MSM8960 is reworked to mimic
the design in IPQ8074 to allow the GCC driver to probe earlier.
- The regulator based mmcx supply for Qualcomm dispcc and videocc is
dropped, as the only upstream target that adapted this interface
was transitioned several kernel versions ago
- Qualcomm GDSCs found to be enabled at boot will now reflect in the
enable count of the supply, as was done with the regulator supplies
previously
- Correct adc1, nic_media and edma1's parents for NXP i.MX93
- rdiv, mfd values, the return rate in recalc_rate and add more
frequencies in the table for fracn-gppll on i.MX
- Remove Allwinner workaround logic/compatible in fixed factor code
- MediaTek clk driver cleanups
- Add reset support to more MediaTek clk drivers
- deduplicate Allwinner ccu_clks arrays
- Allwinner H6 GPU DFS support
- Adjust Allwinner Kconfig to limit choice
- Fix initconst confusion on Renesas R-Car Gen4
- Add GPT/POEG (PWM) clocks and resets on Renesas RZ/G2L
- Add PFC and WDT clocks and resets on Renesas RZ/V2M
- Add thermal, SDHI, Z (CPU core), PCIe, and HSCIF (serial) clocks on
Renesas R-Car S4-8"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (124 commits)
clk: fixed-factor: Introduce *clk_hw_register_fixed_factor_parent_hw()
clk: mux: Introduce devm_clk_hw_register_mux_parent_hws()
clk: divider: Introduce devm_clk_hw_register_divider_parent_hw()
clk: qcom: gcc-msm8994: use parent_hws for gpll0/4
clk: qcom: clk-rpm: convert to parent_data API
dt-bindings: clock: fix wrong clock documentation for qcom,rpmcc
clk: qcom: gcc-msm8939: Add missing USB HS system clock frequencies
clk: qcom: gcc-msm8939: Add missing MDSS MDP clock frequencies
clk: qcom: gcc-msm8939: Add missing CAMSS CPP clock frequencies
clk: qcom: gcc-msm8939: Fix venus0_vcodec0_clk frequency definitions
clk: qcom: gcc-msm8939: Add missing CAMSS CCI bus clock
clk: qcom: gcc-msm8939: Fix weird field spacing in ftbl_gcc_camss_cci_clk
clk: qcom: gdsc: Bump parent usage count when GDSC is found enabled
clk: qcom: Drop mmcx gdsc supply for dispcc and videocc
clk: qcom: fix build error initializer element is not constant
clk: sprd: Add dt-bindings include file for UMS512
dt-bindings: clk: sprd: Add bindings for ums512 clock controller
clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS
dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sources
clk: qcom: add support for SM8350 DISPCC
...
Linus Torvalds [Fri, 5 Aug 2022 01:34:05 +0000 (18:34 -0700)]
Merge tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Here are the updates for this merge window from the GPIO subsystem.
We have more lines removed than added thanks to dropping of a driver
for a platform that's no longer supported. Otherwise the changes are
pretty straightforward: support for some new models, various
improvements to existing drivers, some tweaks to the core library code
and DT bindings updates.
Summary:
- remove gpio-vr41xx driver as the only platform using it got dropped
too
- add support for suspend/resume to gpio-davinci
- improvements to the GPIO character device code
- add support for disabling bias for in-kernel users (up until now
only user-space could set it)
- drop unused devm_gpio_free()
- fix a refcount issue in gpiolib OF
- use device match helpers where applicable
- add support for a new model to gpio-rockchip
- non-functional improvements in gpio-adp5588
- improve and simplify teardown in gpio-twl4030 and gpio-ucb1400
- modernize the gpio-74xx-mmio and gpio-adnp drivers
- coding style improvements in gpio-xilinx, gpio-104-idi-48
- support new model (pca9571) in gpio-pca9570
- convert the DT bindings to YAML for gpio-mvebu and update the
document
- don't return error codes from remove() in gpio-brcmstb
- add a library for the intel 8255 PPI interface and use it in
drivers
- reduce using magic numbers and improve code readability in several
drivers
- convert DT bindings to YAML for gpio-tpic2810
- add new models to DT bindings for gpio-frl-imx
- Kconfig improvements
- other minor tweaks and improvements"
* tag 'gpio-updates-for-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (52 commits)
dt-bindings: gpio: fsl-imx-gpio: Add i.MXRT compatibles
gpio: 74xx-mmio: Use bits instead of plain numbers for flags
gpio: xilinx: add missing blank line after declarations
MAINTAINERS: Update Intel 8255 GPIO driver file list
gpio: gpio-mm: Implement and utilize register structures
gpio: 104-idi-48: Implement and utilize register structures
gpio: 104-dio-48e: Implement and utilize register structures
gpio: i8255: Introduce the Intel 8255 interface library module
gpio: 104-idio-16: Implement and utilize register structures
gpio: ws16c48: Implement and utilize register structures
gpio: remove VR41XX related gpio driver
dt-bindings: gpio: add pull-disable flag
gpiolib: acpi: support bias pull disable
gpiolib: of: support bias pull disable
gpiolib: add support for bias pull disable
gpio: 74xx-mmio: use bits.h macros for all masks
gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
gpio: 74xx-mmio: Make use of device properties
gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
gpiolib: cdev: consolidate edge detector configuration flags
...
Linus Torvalds [Fri, 5 Aug 2022 01:19:14 +0000 (18:19 -0700)]
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
Linus Torvalds [Fri, 5 Aug 2022 01:08:34 +0000 (18:08 -0700)]
Merge tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Add spi-peripheral-props.yaml references to various SPI device
bindings
- Convert qcom,pm8916-wdt, ds1307, Qualcomm BAM DMA, is31fl319x,
skyworks,aat1290, Rockchip EMAC, gpio-ir-receiver, ahci-ceva, Arm
CCN PMU, rda,8810pl-intc, sil,sii9022, ps2-gpio, and
arm-firmware-suite bindings to DT schema format
- New bindings for Arm virtual platforms display, Qualcomm IMEM
memory region, Samsung S5PV210 ChipID, EM Microelectronic EM3027
RTC, and arm,cortex-a78ae
- Add vendor prefixes for asrock, bytedance, hxt, ingrasys, inventec,
quanta, and densitron
- Add missing MSI and IOMMU properties to host-generic-pci
- Remove bindings for removed EFM32 platform
- Remove old chosen.txt binding (replaced by schema)
- Treewide add missing type information for properties
- Treewide fixing of typos and its vs. it's in bindings. Its all good
now.
- Drop unnecessary quoting in power related schemas
- Several LED binding updates which didn't get picked up
- Move various bindings to proper directories
DT core code:
- Convert unittest GPIO related tests to use fwnode
- Check ima-kexec-buffer against memory bounds
- Print reserved-memory allocation/reservation failures as errors
- Cleanup early_init_dt_reserve_memory_arch()
- Simplify of_overlay_fdt_apply() tail"
* tag 'devicetree-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (65 commits)
dt-bindings: mtd: microchip,mchp48l640: use spi-peripheral-props.yaml
dt-bindings: power: supply: drop quotes when not needed
dt-bindings: power: reset: drop quotes when not needed
dt-bindings: power: drop quotes when not needed
dt-bindings: PCI: host-generic-pci: Allow IOMMU and MSI properties
of/fdt: declared return type does not match actual return type
devicetree/bindings: correct possessive "its" typos
dt-bindings: net: convert emac_rockchip.txt to YAML
dt-bindings: eeprom: microchip,93lc46b: move to eeprom directory
dt-bindings: eeprom: at25: use spi-peripheral-props.yaml
dt-bindings: display: use spi-peripheral-props.yaml
dt-bindings: watchdog: qcom,pm8916-wdt: convert to dtschema
dt-bindings: power: reset: qcom,pon: use absolute path to other schema
dt-bindings: iio/dac: adi,ad5766: Add missing type to 'output-range-microvolts'
dt-bindings: power: supply: charger-manager: Add missing type for 'cm-battery-stat'
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode'
of/fdt: Clean up early_init_dt_reserve_memory_arch()
dt-bindings: PCI: fsl,imx6q-pcie: Add missing type for 'reset-gpio-active-high'
dt-bindings: rtc: Add EM Microelectronic EM3027 bindings
dt-bindings: rtc: ds1307: Convert to json-schema
...
Linus Torvalds [Fri, 5 Aug 2022 01:04:28 +0000 (18:04 -0700)]
Merge tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for AMD SOCs using SFH1.1 memory access (Basavaraj Natikar)
- XP-PEN Deco L support (José Expósito)
- support for Elan eKTH6915 touchscreens (Douglas Anderson)
- other small assorted fixes and device ID additions
* tag 'for-linus-2022080201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (39 commits)
HID: amd_sfh: Handle condition of "no sensors"
HID: amd_sfh: Fix implicit declaration error on i386
HID: apple: Add "GANSS" to the non-Apple list
HID: alps: Declare U1_UNICORN_LEGACY support
HID: wacom: Force pen out of prox if no events have been received in a while
HID: nintendo: Add missing array termination
HID: lg-g15: Fix comment typo
HID: amd_sfh: Implement SFH1.1 functionality
HID: amd_sfh: Move interrupt handling to common interface
HID: amd_sfh: Move amd_sfh_work to common interface
HID: amd_sfh: Move global functions to static
HID: amd_sfh: Add remove operation in amd_mp2_ops
HID: amd_sfh: Add PM operations in amd_mp2_ops
HID: amd_sfh: Add descriptor operations in amd_mp2_ops
HID: amd_sfh: Move request_list variable to client data
HID: amd_sfh: Move request_list struct to header file
HID: amd_sfh: Move common macros and structures
HID: amd_sfh: Add NULL check for hid device
HID: core: remove unneeded assignment in hid_process_report()
ID: intel-ish-hid: hid-client: drop unexpected word "the" in the comments
...
Linus Torvalds [Thu, 4 Aug 2022 22:35:58 +0000 (15:35 -0700)]
Merge tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- support KCOV
- enable ARCH_HAS_GCOV_PROFILE_ALL
- minor ISS network driver cleanups
* tag 'xtensa-20220804' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: enable ARCH_HAS_GCOV_PROFILE_ALL
xtensa: enable KCOV support
xtensa: iss: fix handling error cases in iss_net_configure()
xtensa: iss/network: provide release() callback
xtensa: iss/network: drop 'devices' list
Linus Torvalds [Thu, 4 Aug 2022 22:27:20 +0000 (15:27 -0700)]
Merge tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux
Pull csky updates from Guo Ren:
- Add jump-label implementation
- Add qspinlock support
- Enable ARCH_INLINE_READ*/WRITE*/SPIN*
- Some fixups and a coding convention
* tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux:
csky: abiv1: Fixup compile error
csky: cmpxchg: Coding convention for BUILD_BUG()
csky: Enable ARCH_INLINE_READ*/WRITE*/SPIN*
csky: Add qspinlock support
csky: Add jump-label implementation
csky: Move HEAD_TEXT_SECTION out of __init_begin-end
csky: Correct position of _stext
csky: Use the bitmap API to allocate bitmaps
csky/kprobe: reclaim insn_slot on kprobe unregistration
Linus Torvalds [Thu, 4 Aug 2022 22:20:39 +0000 (15:20 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32
Pull AVR32 updates from Hans-Christian Noren Egtvedt:
"Mostly changes to documentation and comments"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
video:backlight: remove reference to AVR32 architecture in ltv350qv
video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb
usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig
sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver
net: remove cdns,at32ap7000-macb device tree entry
misc: update maintainer email address and description for atmel-ssc
mfd: remove reference to AVR32 architecture in atmel-smc.c
dma:dw: remove reference to AVR32 architecture in core.c
Eric Farman [Thu, 4 Aug 2022 21:39:26 +0000 (23:39 +0200)]
s390/dasd: Establish DMA alignment
linux-next commit c49ec585f24a ("iomap: add support for dma aligned
direct-io") changes the alignment requirement to come from the block
device rather than the block size, and the default alignment
requirement is 512-byte boundaries. Since DASD I/O has page
alignments for IDAW/TIDAW requests, let's override this value to
restore the expected behavior.
Make this change for both ECKD and DIAG disciplines, as they both
would fall into this category. Leave FBA alone, since it is always
comprised of 512-byte blocks.
Signed-off-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220804213926.3361574-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 4 Aug 2022 22:10:55 +0000 (15:10 -0700)]
Merge tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series fine tuning virtio support for Xen guests, including removal
the now again unused "platform_has()" feature.
- a fix for host admin triggered reboot of Xen guests
- a simple spelling fix
* tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: don't require virtio with grants for non-PV guests
kernel: remove platform_has() infrastructure
virtio: replace restricted mem access flag with callback
xen: Fix spelling mistake
xen/manage: Use orderly_reboot() to reboot
Linus Torvalds [Thu, 4 Aug 2022 21:59:54 +0000 (14:59 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
Mike Snitzer [Thu, 4 Aug 2022 19:55:57 +0000 (15:55 -0400)]
dm verity: have verify_wq use WQ_HIGHPRI if "try_verify_in_tasklet"
Allow verify_wq to preempt softirq since verification in tasklet will
fall-back to using it for error handling (or if the bufio cache
doesn't have required hashes).
Suggested-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Sudip Mukherjee [Thu, 4 Aug 2022 18:01:46 +0000 (19:01 +0100)]
drm/amd/amdgpu: fix build failure due to implicit declaration
The builds for alpha and mips allmodconfig fails with the error:
drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:23: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:21: error: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:545:33: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
Linus Torvalds [Thu, 4 Aug 2022 19:12:54 +0000 (12:12 -0700)]
Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Linus Torvalds [Thu, 4 Aug 2022 19:01:42 +0000 (12:01 -0700)]
Merge tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver patches for 6.0-rc1.
Another round where we removed more lines of code than added, always a
nice progression. Some of that came from the movement of the vme code
back into staging, and removal of some other of the vme driver code as
there are no known users and it is very obsolete and unmaintained. It
can be added back easily if someone offers to maintain it.
Other than that this merge has lots of little things:
- huge cleanups for r8188eu driver
- minor cleanups for other wifi drivers
- tiny loop fixes for greybus code
- other small coding style fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits)
staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c
staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup
staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function
staging: vt6655: Rename MACvClearStckDS
staging: fbtft: core: set smem_len before fb_deferred_io_init call
staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
staging: r8188eu: make dump_chip_info() static
staging: r8188eu: remove DoReserved prototype
staging: r8188eu: remove OnAtim prototype
staging: r8188eu: remove SetHwReg8188EU()
staging: r8188eu: make update_TSF() and correct_TSF() static
staging: r8188eu: remove unused parameter from update_TSF()
staging: r8188eu: remove unused parameter from correct_TSF()
staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
staging: pi433: remove duplicated comments
staging: qlge: refine variable name
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function
...
usb: cdns3: Don't use priv_dev uninitialized in cdns3_gadget_ep_enable()
Clang warns:
drivers/usb/cdns3/cdns3-gadget.c:2290:11: error: variable 'priv_dev' is uninitialized when used here [-Werror,-Wuninitialized]
dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
^~~~~~~~
include/linux/dev_printk.h:155:18: note: expanded from macro 'dev_dbg'
dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~
include/linux/dynamic_debug.h:167:7: note: expanded from macro 'dynamic_dev_dbg'
dev, fmt, ##__VA_ARGS__)
^~~
include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
drivers/usb/cdns3/cdns3-gadget.c:2278:31: note: initialize the variable 'priv_dev' to silence this warning
struct cdns3_device *priv_dev;
^
= NULL
1 error generated.
The priv_dev assignment was moved below the if statement to avoid
potentially dereferencing ep before it was checked but priv_dev is used
in the dev_dbg() call.
To fix this, move the priv_dev and comp_desc assignments back to their
original spot and hoist the ep check above those assignments with a call
to pr_debug() instead of dev_dbg().
Fixes: 6ba7eb0fda92 ("usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()") Link: https://github.com/ClangBuiltLinux/linux/issues/1680 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 4 Aug 2022 18:41:28 +0000 (11:41 -0700)]
Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
Linus Torvalds [Thu, 4 Aug 2022 18:31:20 +0000 (11:31 -0700)]
Merge tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
Linus Torvalds [Thu, 4 Aug 2022 18:05:48 +0000 (11:05 -0700)]
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
Mike Snitzer [Tue, 26 Jul 2022 15:29:50 +0000 (11:29 -0400)]
dm verity: allow optional args to alter primary args handling
The previous commit ("dm verity: Add optional "try_verify_in_tasklet"
feature") imposed that CRYPTO_ALG_ASYNC mask be used even if the
optional "try_verify_in_tasklet" feature was not specified. This was
because verity_parse_opt_args() was called after handling the primary
args (due to it having data dependencies on having first parsed all
primary args).
Enhance verity_ctr() so that simple optional args, that don't have a
data dependency on primary args parsing, can alter how the primary
args are handled. In practice this means verity_parse_opt_args() gets
called twice. First with the new 'only_modifier_opts' arg set to true,
then again with it set to false _after_ parsing all primary args.
This allows the v->use_tasklet flag to be properly set and then used
when verity_ctr() parses the primary args and then calls
crypto_alloc_ahash() with CRYPTO_ALG_ASYNC conditionally set.
Using tasklets for disk verification can reduce IO latency. When there
are accelerated hash instructions it is often better to compute the
hash immediately using a tasklet rather than deferring verification to
a work-queue. This reduces time spent waiting to schedule work-queue
jobs, but requires spending slightly more time in interrupt context.
If the dm-bufio cache does not have the required hashes we fallback to
the work-queue implementation. FEC is only possible using work-queue
because code to support the FEC feature may sleep.
The following shows a speed comparison of random reads on a dm-verity
device. The dm-verity device uses a 1G ramdisk for data and a 1G
ramdisk for hashes. One test was run using tasklets and one test was
run using the existing work-queue solution. Both tests were run when
the dm-bufio cache was hot. The tasklet implementation performs
significantly better since there is no time spent waiting for
work-queue jobs to be scheduled.
Bjorn Helgaas [Thu, 4 Aug 2022 16:46:53 +0000 (11:46 -0500)]
Merge branch 'pci/header-cleanup-immutable'
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and
ATA_SECONDARY_IRQ() instead (Stafford Horne)
- Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used
(Stafford Horne)
- Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne)
- Move common PCI definitions that arches sometimes override to
asm-generic/pci.h (Stafford Horne)
- Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed
(bisection hole here) (Randy Dunlap)
* pci/header-cleanup-immutable:
PCI: Stub __pci_ioport_map() for arches that don't support it at all
x86/cyrix: include header linux/isa-dma.h
asm-generic: Add new pci.h and use it
csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE
PCI: Move isa_dma_bridge_buggy out of asm/dma.h
PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:57 +0000 (11:41 -0500)]
Merge branch 'pci/ctrl/mediatek-gen3'
- Fix refcount leak in mtk_pcie_init_irq_domains() (Miaoqian Lin)
- Print decoded LTSSM state when the link doesn't come up (Jianjun Wang)
* pci/ctrl/mediatek-gen3:
PCI: mediatek-gen3: Print LTSSM state when PCIe link down
PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:55 +0000 (11:41 -0500)]
Merge branch 'pci/ctrl/imx6'
- Factor out ref clock disables to match enables (Bjorn Helgaas)
- Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu)
- Propagate regulator and clock errors back to .host_init() caller (Richard
Zhu)
- Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu)
- Call host init function directly in resume instead of duplicating the
code (Richard Zhu)
- Turn off regulators when suspending (Richard Zhu)
- Make link being down a non-fatal error so probe doesn't fail (Richard
Zhu)
- Start link in resume only if it was up before suspend to reduce resume
time (Richard Zhu)
- Move PHY init and power-on out of clock- and reset-related functions
(Richard Zhu)
- Rework suspend callback to be more symmetric with resume (Richard Zhu)
- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)
- Allow speeds faster than Gen2 (Richard Zhu)
* pci/ctrl/imx6:
PCI: imx6: Support more than Gen2 speed link mode
PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
PCI: imx6: Reformat suspend callback to keep symmetric with resume
PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
PCI: imx6: Disable clocks in reverse order of enable
PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
PCI: imx6: Reduce resume time by only starting link if it was up before suspend
PCI: imx6: Mark the link down as non-fatal error
PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
PCI: imx6: Turn off regulator when system is in suspend mode
PCI: imx6: Call host init function directly in resume
PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
PCI: imx6: Propagate .host_init() errors to caller
PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
PCI: imx6: Factor out ref clock disable to match enable
PCI: imx6: Move imx6_pcie_clk_disable() earlier
PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
PCI: imx6: Move PHY management functions together
PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
- Move eDMA private data from struct dw_edma to struct dw_edma_chip (Frank
Li)
- Convert "struct dw_edma_region rg_region" to "void __iomem *reg_base"
since only the virtual address (not physical address or size) is used
(Frank Li)
- Rename "*_ch_cnt" to "ll_*_cnt" to reflect actual usage (Frank Li)
- Drop dma_slave_config.direction field usage (Serge Semin)
- Fix eDMA Rd/Wr-channels and DMA-direction semantics (Serge Semin)
- Add chip-specific DW_EDMA_CHIP_LOCAL flag to indicate that local eDMA
doesn't require generating MSIs to remote (Frank Li)
- Enable DMA tests for endpoints that support it (Frank Li)
* pci/ctrl/dwc-edma:
PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities
dmaengine: dw-edma: Add support for chip-specific flags
dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
dmaengine: dw-edma: Drop dma_slave_config.direction field usage
dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chip
dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip
dmaengine: dw-edma: Detach the private data and chip info structures
dmaengine: dw-edma: Remove unused irq field in struct dw_edma_chip
- Detect iATU region size from hardware (Serge Semin)
- Validate iATU outbound mappings against hardware constraints (Serge
Semin)
- Check for errors in iATU setup (Serge Semin)
- Allocate a 32-bit DMA-able page to be MSI target instead of using a
driver data structure that may not be addressable with 32-bit address
(Will McVicker)
- Use the bitmap API to allocate bitmaps instead of open-coding it
(Christophe JAILLET)
- Correct dw_pcie_free_msi() checking for when to remove IRQ handler and
data (Dmitry Baryshkov)
- Split MSI init to new dw_pcie_msi_host_init() function (Dmitry Baryshkov)
- Convert struct pcie_port.msi_irq to an array so we can support more than
32 MSI interrupts (Dmitry Baryshkov)
- Handle MSIs routed to multiple GIC interrupts for Qualcomm platforms with
groups of 32 MSI vectors (Dmitry Baryshkov)
- Add additional MSI interrupts to qcom DT (Dmitry Baryshkov)
* pci/ctrl/dwc:
dt-bindings: PCI: qcom: Support additional MSI vectors
PCI: dwc: Handle MSIs routed to multiple GIC interrupts
PCI: dwc: Convert struct pcie_port.msi_irq to an array
PCI: dwc: Split MSI IRQ parsing/allocation to a separate function
PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
PCI: dwc: Use the bitmap API to allocate bitmaps
PCI: dwc: Fix MSI msi_msg DMA mapping
PCI: dwc: Check iATU in/outbound range setup status
PCI: dwc: Validate iATU outbound mappings against hardware constraints
PCI: dwc: Add iATU regions size detection procedure
PCI: dwc: Simplify in/outbound iATU setup methods
PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB
PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO
PCI: dwc: Add dw_pcie_ops.host_deinit() callback
PCI: tegra194: Drop manual DW PCIe controller version setup
PCI: intel-gw: Drop manual DW PCIe controller version setup
PCI: dwc: Add macros to compare Synopsys IP core versions
PCI: dwc: Read DWC IP core version from register
PCI: dwc: Use native DWC IP core version representation
PCI: dwc: Detect iATU settings after getting "addr_space" resource
PCI: dwc: Log link speed and width if it comes up
PCI: dwc-plat: Drop dw_plat_pcie_of_match[] forward declaration
PCI: dwc-plat: Drop unused regmap pointer
PCI: dwc-plat: Simplify dw_plat_pcie_probe() return values
PCI: dwc: Rename struct pcie_port to dw_pcie_rp
PCI: dwc: Move io_cfg_atu_shared to struct pcie_port
PCI: dwc: Add start_link/stop_link inlines
PCI: dwc: Reuse local pointer to the resource data
PCI: dwc: Organize local variable usage
PCI: dwc: Convert dw_pcie_link_up() to use dw_pcie_readl_dbi()
PCI: dwc: Simplify unrolled iATU detection
PCI: dwc: Add newlines to log messages
PCI: dwc: Add braces to multi-line if-else statements
PCI: dwc: Always enable CDM check if "snps,enable-cdm-check" exists
PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors
PCI: dwc: Set INCREASE_REGION_SIZE flag based on limit address
PCI: dwc: Disable outbound windows only for controllers using iATU
PCI: dwc: Add unroll iATU space support to dw_pcie_disable_atu()
PCI: dwc: Stop link on host_init errors and de-initialization
- Prevent config space access when link is down (Jim Quinlan)
- Split post-link up initialization to brcm_pcie_start_link() (Jim Quinlan)
- Enable child bus device regulators described under Root Ports in DT (Jim
Quinlan)
- Disable/enable regulators in suspend/resume (Jim Quinlan)
- Rename .map_bus() functions to end with 'map_bus' as they do in other
drivers (Jim Quinlan)
* pci/ctrl/brcmstb:
PCI: brcmstb: Rename .map_bus() functions to end with 'map_bus'
PCI: brcmstb: Disable/enable regulators in suspend/resume
PCI: brcmstb: Enable child bus device regulators from DT
PCI: brcmstb: Split post-link up initialization to brcm_pcie_start_link()
PCI: brcmstb: Prevent config space access when link is down
PCI: brcmstb: Remove unnecessary forward declarations
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:52 +0000 (11:41 -0500)]
Merge branch 'pci/resource'
- Replace sparc pci_mmap_page_range() wrapper. This still leaves a
sparc-specific pci_mmap_resource_range(), but it's only one interface
instead of two (Arnd Bergmann)
- Remove sparc-specific pci_mmap_resource_range() by implementing
pci_iobar_pfn(). This removes the ability to map the entire PCI I/O
space using /proc/bus/pci, but we believe that's already been broken
since v2.6.28 (Arnd Bergmann)
* pci/resource:
sparc: Use generic pci_mmap_resource_range()
PCI: Remove pci_mmap_page_range() wrapper
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:52 +0000 (11:41 -0500)]
Merge branch 'pci/err'
- Recognize disconnected devices so we don't bother trying to set them to
"frozen" or "normal" state (Christoph Hellwig)
- Clear PCI Status register during enumeration in case firmware left errors
logged (Kai-Heng Feng)
- Configure ECRC for every device, including hot-added ones (Stefan Roese)
- Keep AER error reporting enabled for switches (Stefan Roese)
- Enable error reporting for all devices that support AER (Stefan Roese)
- Iterate over error counters instead of error strings to avoid printing
junk in AER sysfs counters (Mohamed Khalfella)
* pci/err:
PCI/AER: Iterate over error counters instead of error strings
PCI/AER: Enable error reporting when AER is native
PCI/portdrv: Don't disable AER reporting in get_port_device_capability()
PCI/AER: Configure ECRC for every device
PCI: Clear PCI_STATUS when setting up device
PCI/ERR: Recognize disconnected devices in report_error_detected()
Bjorn Helgaas [Thu, 4 Aug 2022 16:41:51 +0000 (11:41 -0500)]
Merge branch 'pci/enumeration'
- Split out ARI "next function" handling from the traditional one (Niklas
Schnelle)
- Move jailhouse "isolated function" (non-zero functions where function 0
doesn't exist) handling to pci_scan_slot() to avoid duplicating
multi-function scanning in pci_scan_child_bus_extend() (Niklas Schnelle)
- Extend "isolated function" probing to s390 (Niklas Schnelle).
- Allow s390 zPCI zbus without a function 0 (Niklas Schnelle)
* pci/enumeration:
s390/pci: allow zPCI zbus without a function zero
PCI: Extend isolated function probing to s390
PCI: Move jailhouse's isolated function handling to pci_scan_slot()
PCI: Split out next_ari_fn() from next_fn()
PCI: Clean up pci_scan_slot()
MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
When CONFIG_XPA is enabled, Clang warns:
arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
^
arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
# define _PAGE_NO_EXEC (1 << _PAGE_NO_EXEC_SHIFT)
^
2 errors generated.
_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.
According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf
fbdev:
- device unregistering fixes
- vesa: Support COMPILE_TEST
- Disable firmware-device registration when first native driver loads
aperture:
- fix segfault during hot-unplug
- export for use with other subsystems
client:
- use driver validated modes
dp:
- aux: make probing more reliable
- mst: Read extended DPCD capabilities during system resume
- Support waiting for HDP signal
- Port-validation fixes
probe-helper:
- use 640x480 as displayport fallback
scheduler:
- don't kill jobs in interrupt context
bridge:
- Add support for i.MX8qxp and i.MX8qm
- lots of fixes/cleanups
- Add TI-DLPC3433
- fy07024di26a30d: Optional GPIO reset
- ldb: Add reg and reg-name properties to bindings, Kconfig fixes
- lt9611: Fix display sensing;
- tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
- tc358775: Fix clock settings
- ti-sn65dsi83: Allow GPIO to sleep
- adv7511: I2C fixes
- anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
- fsl-ldb: Drop DE flip
- ti-sn65dsi86: Convert to atomic modesetting
amdgpu:
- use atomic fence helpers in DM
- fix VRAM address calculations
- export CRTC bpc via debugfs
- Initial devcoredump support
- Enable high priority gfx queue on asics which support it
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11 / SDMA 6
- Add gfxoff status query for vangogh
- Fix timestamps for cursor only commits
- Adjust GART size on newer APUs for S/G display
- fix buddy memory corruption
amdkfd:
- MMU notifier fixes
- P2P DMA support using dma-buf
- Add available memory IOCTL
- HMM profiler support
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
i915:
- General driver clean-up
- DG2 enabling (still under force probe)
- DG2 small BAR memory support
- HuC loading support
- DG2 workarounds
- DG2/ATS-M device IDs added
- Ponte Vecchio prep work and new blitter engines
- add Meteorlake support
- Fix sparse warnings
- DMC MMIO range checks
- Audio related fixes
- Runtime PM fixes
- PSR fixes
- Media freq factor and per-gt enhancements
- DSI fixes for ICL+
- Disable DMC flip queue handlers
- ADL_P voltage swing updates
- Use more the VBT for panel information
- Fix on Type-C ports with TBT mode
- Improve fastset and allow seamless M/N changes
- Accept more fixed modes with VRR/DMRRS panels
- Disable connector polling for a headless SKU
- ADL-S display PLL w/a
- Enable THP on Icelake and beyond
- Fix i915_gem_object_ggtt_pin_ww regression on old platforms
- Expose per tile media freq factor in sysfs
- Fix dma_resv fence handling in multi-batch execbuf
- Improve on suspend / resume time with VT-d enabled
- export CRTC bpc settings via debugfs
msm:
- gpu: a619 support
- gpu: Fix for unclocked GMU register access
- gpu: Devcore dump enhancements
- client utilization via fdinfo support
- fix fence rollover issue
- gem: Lockdep false-positive warning fix
- gem: Switch to pfn mappings
- WB support on sc7180
- dp: dropped custom bulk clock implementation
- fix link retraining on resolution change
- hdmi: dropped obsolete GPIO support
tegra:
- context isolation for host1x engines
- tegra234 soc support
exynos:
- Fix resume function issue of exynos decon driver by calling
clk_disable_unprepare() properly if clk_prepare_enable() failed.
nouveau:
- set of misc fixes/cleanups
- display cleanups
gma500:
- Cleanup connector I2C handling
hyperv:
- Unify VRAM allocation of Gen1 and Gen2
meson:
- Support YUV422 output; Refcount fixes
mgag200:
- Support damage clipping
- Support gamma handling
- Protect concurrent HW access
- Fixes to connector
- Store model-specific limits in device-info structure
- fix PCI register init
panfrost:
- Valhall support
r128:
- Fix bit-shift overflow
rockchip:
- Locking fixes in error path
ssd130x:
- Fix built-in linkage
udl:
- Always advertize VGA connector
ast:
- Support multiple outputs
- fix black screen on resume
sun4i:
- HDMI PHY cleanups
vc4:
- Add support for BCM2711
vkms:
- Allocate output buffer with vmalloc()
mcde:
- Fix ref-count leak
mxsfb/lcdif:
- Support i.MX8MP LCD controller
stm/ltdc:
- Support dynamic Z order
- Support mirroring
ingenic:
- Fix display at maximum resolution"
* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
drm/amdgpu: enable support for psp 13.0.4 block
drm/amdgpu: add files for PSP 13.0.4
drm/amdgpu: add header files for MP 13.0.4
drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
drm/amdgpu: send msg to IMU for the front-door loading
drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
drm/amdgpu: fix hive reference leak when reflecting psp topology info
drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
drm/amd/pm: update driver if header for SMU 13.0.0
drm/amdgpu: move mes self test after drm sched re-started
drm/amdgpu: drop non-necessary call trace dump
drm/amdgpu: enable VCN cg and JPEG cg/pg
drm/amdgpu: vcn_4_0_2 video codec query
drm/amdgpu: add VCN_4_0_2 firmware support
drm/amdgpu: add VCN function in NBIO v7.7
drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
drm/amd/amdgpu: add memory training support for PSP_V13
drm/amdkfd: remove an unnecessary amdgpu_bo_ref
drm/amd/pm: Add get_gfx_off_status interface for yellow carp
...
projects / kernel.git / log