drm/gma500: Make cdv lvds use ddc adapter from drm_connector
We're moving all uses of ddc_bus to drm_connector where they belong.
Also, add missing call to destroy ddc bus when destroying the connector
and cleanup the error handling in cdv_intel_lvds_init().
drm/ssd130x: Only define a SPI device ID table when built as a module
The kernel test robot reports a compile warning due the ssd130x_spi_table
variable being defined but not used. This happen when ssd130x-spi driver
is built-in instead of being built as a module, i.e:
CC drivers/gpu/drm/solomon/ssd130x-spi.o
AR drivers/base/firmware_loader/built-in.a
AR drivers/base/built-in.a
CC kernel/trace/trace.o
drivers/gpu/drm/solomon/ssd130x-spi.c:155:35: warning: ‘ssd130x_spi_table’ defined but not used [-Wunused-const-variable=]
155 | static const struct spi_device_id ssd130x_spi_table[] = {
| ^~~~~~~~~~~~~~~~~
The driver shouldn't need a SPI device ID table and only have an OF device
ID table, but the former is needed to workaround an issue in the SPI core.
This always reports a MODALIAS of the form "spi:<device>" even for devices
registered through Device Trees.
But the table is only needed when the driver built as a module to populate
the .ko alias info. It's not needed when the driver is built-in the kernel.
Saurabh Sengar [Sat, 21 May 2022 14:23:39 +0000 (07:23 -0700)]
drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
There were two different approaches getting used in this driver to
allocate vram:
1. VRAM allocation from PCI region for Gen1
2. VRAM alloaction from MMIO region for Gen2
First approach limilts the vram to PCI BAR size, which is 64 MB in most
legacy systems. This limits the maximum resolution to be restricted to
64 MB size, and with recent conclusion on fbdev issue its concluded to have
similar allocation strategy for both Gen1 and Gen2. This patch unifies
the Gen1 and Gen2 vram allocation strategy.
Christian König [Mon, 25 Apr 2022 12:22:12 +0000 (14:22 +0200)]
dma-buf: generalize dma_fence unwrap & merging v3
Introduce a dma_fence_unwrap_merge() macro which allows to unwrap fences
which potentially can be containers as well and then merge them back
together into a flat dma_fence_array.
v2: rename the function, add some more comments about how the wrapper is
used, move filtering of signaled fences into the unwrap iterator,
add complex selftest which covers more cases.
v3: fix signaled fence filtering once more
Yunhao Tian [Tue, 10 May 2022 03:02:19 +0000 (11:02 +0800)]
drm/mipi-dbi: align max_chunk to 2 in spi_transfer
In __spi_validate, there's a validation that no partial transfers
are accepted (xfer->len % w_size must be zero). When
max_chunk is not a multiple of bpw (e.g. max_chunk = 65535,
bpw = 16), the transfer will be rejected.
This patch aligns max_chunk to 2 bytes (the maximum value of bpw is 16),
so that no partial transfer will occur.
Add the features, issues, and GPU ID for Mali-G57, a first-generation
Valhall GPU. Other first- and second-generation Valhall GPUs should be
similar.
v2: Split out issue list for r0p0 from newer Natt GPUs, as TTRX_3485 was
fixed in r0p1. Unfortunately, MT8192 has a r0p0, so we do need to handle
TTRX_3485.
L2_MMU_CONFIG is an implementation-defined register. Different Mali GPUs
define slightly different MAX_READS and MAX_WRITES fields, which
throttle outstanding reads and writes when set to non-zero values. When
left as zero, reads and writes are not throttled.
Both kbase and panfrost always zero these registers. Per discussion with
Steven Price, there are two reasons these quirks may be used:
1. Simulating slower memory subsystems. This use case is only of
interest to system-on-chip designers; it is not relevant to mainline.
2. Working around broken memory subsystems. Hopefully we never see this
case in mainline. If we do, we'll need to set this register based on
an SoC-compatible, rather than generally matching on the GPU model.
To the best of our knowledge, these fields are zero at reset, so the
write is not necessary. Let's remove the write to aid porting to new
Mali GPUs, which have different layouts for the L2_MMU_CONFIG register.
Add the HW_FEATURE_CLEAN_ONLY_SAFE bit based on kbase. When I actually
tried to port the logic from kbase, trivial jobs raised Data Invalid
Faults, so this may depend on other coherency details. It's still useful
to have the bit to record the feature bit when adding new models.
TTRX_3485 requires the infamous "dummy job" workaround. I have this
workaround implemented in a local branch, but I have not yet hit a case
that requires it so I cannot test whether the implementation is correct.
In the mean time, add the quirk bit so we can document which platforms
may need it in the future.
From the kernel's perspective, (pre-CSF, "Job Manager") Valhall is more
or less compatible with Bifrost, although they differ to userspace. Add
a compatible for Valhall to the existing Bifrost bindings documentation.
As the first SoC with a Valhall GPU receiving mainline support, add a
specific compatible for the MediaTek MT8192, which instantiates a
Mali-G57.
v2: Change compatible to arm,mali-valhall-jm (Daniel Stone).
Jonathan Liu [Mon, 23 May 2022 13:01:44 +0000 (23:01 +1000)]
drm: bridge: icn6211: Adjust clock phase using SYS_CTRL_1
The code from [1] sets SYS_CTRL_1 to different values depending on the
desired clock phase (0, 1/4, 1/2 or 3/4). A clock phase of 0 aligns the
positive edge of the clock with the pixel data while other values delay
the clock by a fraction of the clock period. A clock phase of 1/2 aligns
the negative edge of the clock with the pixel data.
The driver currently hard codes SYS_CTRL_1 to 0x88 which corresponds to
aligning the positive edge of the clock with the pixel data. This won't
work correctly for panels that require aligning the negative edge of the
clock with the pixel data.
Adjust the clock phase to 0 if DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE is
present in bus_flags, otherwise adjust the clock phase to 1/2 as
appropriate for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE.
Rob Herring [Wed, 25 May 2022 20:56:26 +0000 (15:56 -0500)]
dt-bindings: display: ingenic,jz4780-hdmi: Drop undocumented 'ddc-i2c-bus'
While 'ddc-i2c-bus' is a common property, it should be in a connector
node rather than the HDMI bridge node as the I2C bus goes to a
connector and not the HDMI block. Drop it from the example.
Fabio Estevam [Wed, 25 May 2022 21:53:16 +0000 (18:53 -0300)]
drm: bridge: adv7511: Move CEC definitions to adv7511_cec.c
ADV7511_REG_CEC_RX_FRAME_HDR[] and ADV7511_REG_CEC_RX_FRAME_LEN[]
are only used inside adv7511_cec.c.
Move their definitions to this file to avoid the following build
warnings when CONFIG_DRM_I2C_ADV7511_CEC is not selected:
drivers/gpu/drm/bridge/adv7511/adv7511.h:229:17: warning: 'ADV7511_REG_CEC_RX_FRAME_HDR' defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/bridge/adv7511/adv7511.h:235:17: warning: 'ADV7511_REG_CEC_RX_FRAME_LEN' defined but not used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com> Fixes: c47378d86879 ("drm: bridge: adv7511: use non-legacy mode for CEC RX") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220525215316.1133057-1-festevam@gmail.com
Since commit 49dba410a730 ("drm/vkms: Bugfix racing hrtimer vblank
handle") the work is scheduled at vkms_vblank_simulate() and since
commit 45fdc1e0993c ("drm/vkms: flush crc workers earlier in commit
flow") the work is flushed at vkms_atomic_commit_tail(). Update function
commment to reflect that.
Gao Chao [Tue, 24 May 2022 02:45:51 +0000 (10:45 +0800)]
drm/panel: Fix build error when CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m
If CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20=y && CONFIG_DRM_DISPLAY_HELPER=m,
bulding fails:
drivers/gpu/drm/panel/panel-samsung-atna33xc20.o: In function `atana33xc20_probe':
panel-samsung-atna33xc20.c:(.text+0x744): undefined reference to
`drm_panel_dp_aux_backlight'
make: *** [vmlinux] Error 1
Let CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 select DRM_DISPLAY_DP_HELPER and
CONFIG_DRM_DISPLAY_HELPER to fix this error.
Fixes: 76db0fa2d68f ("drm/panel: atna33xc20: Introduce the Samsung ATNA33XC20 panel") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Gao Chao <gaochao49@huawei.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220524024551.539-1-gaochao49@huawei.com
Mark Menzynski [Mon, 23 May 2022 11:35:41 +0000 (13:35 +0200)]
drm/nouveau: clear output poll workers before nouveau_fbcon_destroy()
Resources needed for output poll workers are destroyed in
nouveau_fbcon_fini() before output poll workers are cleared in
nouveau_display_fini(). This means there is a time between fbcon_fini()
and display_fini(), where if output poll happens, it crashes.
This patch introduces another output poll clearing before fbcon
resources are destroyed.
BUG: KASAN: use-after-free in
__drm_fb_helper_initial_config_and_unlock.cold+0x1f3/0x291
[drm_kms_helper]
Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mark Menzynski <mmenzyns@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220523113541.10562-1-mmenzyns@redhat.com
This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.
This patch depends on the patches just aplied to the media tree, and will
not build without them, which leaves drm-misc-next in a broken state.
Let's revert the two latter patches until rc1 has been branched,
and rc1 has been backmerged into drm-misc-next.
drm/st7735r: Fix module autoloading for Okaya RH128128T
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that the st7735r.ko module won't autoload if
a DT has a node with a compatible "okaya,rh128128t" string.
In that case, kmod expects a "MODALIAS=of:N*T*Cokaya,rh128128t" uevent but
instead will get a "MODALIAS=spi:rh128128t", which is not present in the
list of aliases:
John Stultz [Wed, 11 May 2022 01:26:12 +0000 (01:26 +0000)]
drm/bridge: lt9611: Use both bits for HDMI sensing
In commit b38eafa7adae ("lontium-lt9611: check a different
register bit for HDMI sensing"), the bit flag used to detect
HDMI cable connect was switched from BIT(2) to BIT(0) to improve
compatibility with some monitors that didn't seem to set BIT(2).
However, with that change, I've seen occasional issues where the
detection failed, because BIT(2) was set, but not BIT(0).
Unfortunately, as I understand it, the bits and their function
was never clearly documented. So lets instead check both
(BIT(2) | BIT(0)) when checking the register.
Cc: Yongqin Liu <yongqin.liu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: kernel-team@android.com Fixes: b38eafa7adae ("lontium-lt9611: check a different register bit for HDMI sensing") Signed-off-by: John Stultz <jstultz@google.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220511012612.3297577-2-jstultz@google.com
Marek Vasut [Thu, 19 May 2022 11:23:37 +0000 (13:23 +0200)]
drm/bridge: anx7625: Add missing of_node_put for endpoint
Add of_node_put call on the endpoint node after it is not needed.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Xin Ji <xji@analogixsemi.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220519112337.62198-1-marex@denx.de
Marek Vasut [Wed, 18 May 2022 23:38:44 +0000 (01:38 +0200)]
drm/bridge: ti-sn65dsi83: Handle dsi_lanes == 0 as invalid
Handle empty data-lanes = < >; property, which translates to
dsi_lanes = 0 as invalid.
Fixes: 454c13700cba3 ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220518233844.248504-1-marex@denx.de
drm/i915/display/debug: Expose crtc current bpc via debugfs
This new debugfs will expose the currently using bpc by crtc.
It is very useful for verifying whether we enter the correct
output color depth from IGT.
This patch will also add the connector's max supported bpc to
"i915_display_info" debugfs.
drm/r128: Fix undefined behavior due to shift overflowing the constant
Fix:
drivers/gpu/drm/r128/r128_cce.c: In function ‘r128_do_init_cce’:
drivers/gpu/drm/r128/r128_cce.c:417:2: error: case label does not reduce to an integer constant
case R128_PM4_64BM_64VCBM_64INDBM:
^~~~
drivers/gpu/drm/r128/r128_cce.c:418:2: error: case label does not reduce to an integer constant
case R128_PM4_64PIO_64VCPIO_64INDPIO:
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220405151517.29753-5-bp@alien8.de
Marek Vasut [Fri, 20 May 2022 12:15:43 +0000 (14:15 +0200)]
drm/bridge: tc358767: Make sure Refclk clock are enabled
The Refclk may be supplied by SoC clock output instead of crystal
oscillator, make sure the clock are enabled before any other action
is performed with the bridge chip, otherwise it may either fail to
operate at all, or miss reset GPIO toggle.
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 16bb6b52adee4 ("drm/bridge: tc358767: Add DPI to eDP bridge driver") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Marek Vasut <marex@denx.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220520121543.11550-1-marex@denx.de
Douglas Anderson [Tue, 10 May 2022 19:29:41 +0000 (12:29 -0700)]
drm/dp: Export symbol / kerneldoc fixes for DP AUX bus
While working on the DP AUX bus code I found a few small things that
should be fixed. Namely the non-devm version of
of_dp_aux_populate_ep_devices() was missing an export. There was also
an extra blank line in a kerneldoc and a kerneldoc that incorrectly
documented a return value. Fix these.
drm: Document the power requirements for DP AUX transfers
When doing DP AUX transfers there are two actors that need to be
powered in order for the DP AUX transfer to work: the DP source and
the DP sink. Commit 26ff68b5ec8c ("drm: Mention the power state
requirement on side-channel operations") added some documentation
saying that the DP source is required to power itself up (if needed)
to do AUX transfers. However, that commit doesn't talk anything about
the DP sink.
For full fledged DP the sink isn't really a problem. It's expected
that if an external DP monitor isn't plugged in that attempting to do
AUX transfers won't work. It's also expected that if a DP monitor is
plugged in (and thus asserting HPD) then AUX transfers will work.
When we're looking at eDP, however, things are less obvious. Let's add
some documentation about expectations. Here's what we'll say:
1. We don't expect the DP AUX transfer function to power on an eDP
panel. If an eDP panel is physically connected but powered off then it
makes sense for the transfer to fail.
2. We'll document that the official way to power on a panel is via the
bridge chain, specifically by making sure that the panel's prepare
function has been called (which is called by
panel_bridge_pre_enable()). It's already specified in the kernel doc
of drm_panel_prepare() that this is the way to power the panel on and
also that after this call "it is possible to communicate with any
integrated circuitry via a command bus."
3. We'll also document that for code running in the panel driver
itself that it is legal for the panel driver to power itself up
however it wants (it doesn't need to officially call
drm_panel_pre_enable()) and then it can do AUX bus transfers. This is
currently the way that edp-panel works when it's running atop the DP
AUX bus.
NOTE: there was much discussion of all of this in response to v1 [1]
of this patch. A summary of that is:
* With the Intel i195 driver, apparently eDP panels do get powered
up. We won't forbid this but it is expected that code that wants to
run on a variety of platforms should ensure that the drm_panel's
prepare() function has been called.
* There is at least a reasonable amount of agreement that the
transfer() functions itself shouldn't be responsible for powering
the panel. It's proposed that if we need the DP AUX dev nodes to be
robust for eDP that the code handling the DP AUX dev nodes could
handle powering the panel by ensuring that the panel's prepare()
call was made. Potentially drm_dp_aux_dev_get_by_minor() could be a
good place to do this. This is left as a future exercise. Until
that's fixed the DP AUX dev nodes for eDP are probably best just
used for debugging.
* If a panel could be in PSR and DP AUX via the dev node needs to be
reliable then we need to be able to pull the panel out of PSR. On
i915 this is also apparently handled as part of the transfer()
function.
Douglas Anderson [Wed, 11 May 2022 22:58:08 +0000 (15:58 -0700)]
drm/probe-helper: For DP, add 640x480 if all other modes are bad
As per Displayport spec section 5.2.1.2 ("Video Timing Format") says
that all detachable sinks shall support 640x480 @60Hz as a fail safe
mode.
A DP compliance test expected us to utilize the above fact when all
modes it presented to the DP source were not achievable. It presented
only modes that would be achievable with more lanes and/or higher
speeds than we had available and expected that when we couldn't do
that then we'd fall back to 640x480 even though it didn't advertise
this size.
In order to pass the compliance test (and also support any users who
might fall into a similar situation with their display), we need to
add 640x480 into the list of modes. However, we don't want to add
640x480 all the time. Despite the fact that the DP spec says all sinks
_shall support_ 640x480, they're not guaranteed to support it
_well_. Continuing to read the spec you can see that the display is
not required to really treat 640x480 equal to all the other modes. It
doesn't need to scale or anything--just display the pixels somehow for
failsafe purposes. It should also be noted that it's not hard to find
a display hooked up via DisplayPort that _doesn't_ support 640x480 at
all. The HP ZR30w screen I'm sitting in front of has a native DP port
and doesn't work at 640x480. I also plugged in a tiny 800x480 HDMI
display via a DP to HDMI adapter and that screen definitely doesn't
support 640x480.
As a compromise solution, let's only add the 640x480 mode if:
* We're on DP.
* All other modes have been pruned.
This acknowledges that 640x480 might not be the best mode to use but,
since sinks are _supposed_ to support it, we will at least fall back
to it if there's nothing else.
Note that we _don't_ add higher resolution modes like 1024x768 in this
case. We only add those modes for a failed EDID read where we have no
idea what's going on. In the case where we've pruned all modes then
instead we only want 640x480 which is the only defined "Fail Safe"
resolution.
This patch originated in response to Kuogee Hsieh's patch [1].
Douglas Anderson [Wed, 11 May 2022 22:58:07 +0000 (15:58 -0700)]
drm/probe-helper: Add helper for drm_helper_probe_single_connector_modes()
The drm_helper_probe_single_connector_modes() is a bit long. Let's
break a chunk off to update and validate modes. This helps avoid one
goto and also will allow us to more easily call the helper a second
time in a future patch without adding looping or another goto.
This change is intended to be a no-op change--just code movement.
drm/gem-vram: Share code between GEM VRAM's _{prepare, cleanup}_fb()
The error-recovery code in drm_gem_vram_plane_helper_prepare_fb() is of
the same pattern as drm_gem_vram_plane_helper_cleanup_fb(). Implement
both of them using an internal helper. No functional changes.
drm/gem: Ignore color planes that are unused by framebuffer format
Only handle color planes that exist in a framebuffer's color format.
Ignore non-existing planes.
So far, several helpers assumed that all 4 planes are available and
silently ignored non-existing planes. This lead to subtil bugs with
uninitialized data in instances of struct iosys_map. [1]
drm/gem: Share code between drm_gem_fb_{begin,end}_cpu_access()
The error-recovery code in drm_gem_fb_begin() is of the same pattern
as drm_gem_fb_end(). Implement both of them using an internal helper.
No functional changes.
v2:
* print additional information in error message (Javier)
* fix commit description (Javier)
Dongjin Kim [Mon, 16 May 2022 07:22:45 +0000 (07:22 +0000)]
drm/meson: add YUV422 output support
Support YUV422 output from the Amlogic Meson SoC VPU to the HDMI
controller. Without this YUV422 format out of the HDMI encoder
leads to using the dw-hdmi YUV444 to YUV422 color conversion which
gives wrong colors and a green line on the left edge of the screen.
Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Furkan Kardame <f.kardame@manjaro.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Dan Johansen <strit@manjaro.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220516072245.10745-1-christianshewitt@gmail.com
Miaoqian Lin [Wed, 11 May 2022 05:40:51 +0000 (09:40 +0400)]
drm/meson: Fix refcount leak in meson_encoder_hdmi_init
of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
Add missing put_device() in error path to avoid refcount
leak.
Fixes: bcf5446630b8 ("drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511054052.51981-1-linmq006@gmail.com
drm/mgag200: Split up connector's mode_valid helper
Split up the connector's mode_valid helper into a simple-pipe and a
mode-config helper. The simple-pipe helper tests for display-size
limits while the mode-config helper tests for memory-bandwidth limits.
Also add the mgag200_ prefix to mga_vga_calculate_mode_bandwidth() and
comment on the function's purpose.
The memory-bandwidth tests assume that the display uses 4 bytes per
pixel. The first models of G200SE-A only had 1.75 MiB of VRAM, which
limits these devices to 640x480-32.
v2:
* note the memory constraints on early G200SE-A
drm/mgag200: Test memory requirements in drm_mode_config_funcs.mode_valid
Test for a mode's memory requirements in the device-wide mode_valid
helper. For simplicify, always assume a 32-bit color format. While
some rejected modes would work with less colors, implementing this
is probably not worth the effort.
Also remove the memory-related test from the connector's mode_valid
helper. The test uses the bpp value that users can specify on the
kernel's command line. This value is unrelated and the test would
belong into atomic_check.
struct mga_connector has outlived its purpose. Inline the rsp init
helper into the mode-config code and remove the data structure. No
functional changes.
Store the I2C state within struct mga_device and switch I2C to
managed release. Simplifies the related code and lets us remove
mga_connector_destroy().
drm/mgag200: Implement connector's get_modes with helper
Provide drm_connector_helper_get_modes_from_ddc() to implement the
connector's get_modes callback. The new helper updates the connector
from DDC-provided EDID data.
Initialization of the I2C adapter was allowed to fail. The mgag200
driver would have continued without DDC support. Had this happened in
practice, it would have led to segmentation faults in the connector
code. Resolve this problem by failing driver initialization on I2C-
related errors.
v2:
* initialize 'ret' before drm_err() (kernel test robot)
DDC operation conflicts with concurrent mode setting. Acquire the
driver's I/O lock in get_modes to prevent this. This change should
have been part of commit 946965594140 ("drm/mgag200: Protect
concurrent access to I/O registers with lock"), but apparently got
lost somewhere.
v3:
* fix commit message to say 'drm/mgag200' (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 946965594140 ("drm/mgag200: Protect concurrent access to I/O registers with lock") Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220516134343.6085-2-tzimmermann@suse.de
drm/scheduler: Don't kill jobs in interrupt context
Interrupt context can't sleep. Drivers like Panfrost and MSM are taking
mutex when job is released, and thus, that code can sleep. This results
into "BUG: scheduling while atomic" if locks are contented while job is
freed. There is no good reason for releasing scheduler's jobs in IRQ
context, hence use normal context to fix the trouble.
drm: bridge: DRM_FSL_LDB should depend on ARCH_MXC
The Freescale i.MX8MP LDB bridge is only present on Freescale i.MX8MP
SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user
about this driver when configuring a kernel without i.MX SoC support.
Marek Vasut [Sat, 30 Apr 2022 02:50:20 +0000 (04:50 +0200)]
drm: bridge: icn6211: Register macro clean up
Drop two unused register macros, ICN6211_MAX_REGISTER and MIPI_ATE_STATUS_1,
neither of which is used and where the later should be specified using macro
MIPI_ATE_STATUS(1) instead. Drop the _(n) underscore and keep only the (n)
part of register macros. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220430025020.640277-1-marex@denx.de
Jocelyn Falempe [Fri, 13 May 2022 08:49:00 +0000 (10:49 +0200)]
drm/mgag200: Enable atomic gamma lut update
Add support for atomic update of gamma lut.
With this patch the "Night light" feature of gnome3
is working properly on mgag200.
v2:
- Add a default linear gamma function
- renamed functions with mgag200 prefix
- use format's 4cc code instead of bit depth
- use better interpolation for 16bits gamma
- remove legacy function mga_crtc_load_lut()
- can't remove the call to drm_mode_crtc_set_gamma_size()
because it doesn't work with userspace.
- other small refactors
v3:
- change mgag200_crtc_set_gamma*() argument
to struct drm_format_info *format
- fix printk format to %p4cc for 4cc and %zu for size_t
- rebased to drm-misc-next.
Don't add a mode for the kernel's command-line parameters from
within the DRM client code. Doing so can result in an unusable
display. If there's no compatible command-line mode, the client
will use one of the connector's preferred modes.
All mode creation and validation has to be performed by the
connector. When clients run, the connector's fill_modes callback
has already processed the kernel parameters and validated each
mode before adding it. The connector's mode list does not contain
invalid modes.
When picking a mode, first look for modes that have been specified
by the user on the kernel's command line. Only if that fails, use
the existing heuristic of picking a nearby mode from it's various
parameters.
drm: Always warn if user-defined modes are not supported
Print a warning if a user-specifed display mode is not supported by
the display pipeline. Users specified the display mode on the kernel
command line with the use of the video= parameter. Setting an
unsupported mode will leave the console blank, so we should at least
let the user know why.
Jani Nikula [Mon, 9 May 2022 12:03:03 +0000 (15:03 +0300)]
drm/edid: start propagating drm_edid to lower levels
We'll need to propagate drm_edid everywhere. This is a clunky start, but
a start nonetheless. We'll eventually convert all of the EDID parsing to
struct drm_edid.
Initially, we'll just create the struct drm_edid in stack. This will be
the compat layer for legacy struct edid code. In the future, we'll have
EDID read return drm_edid objects.
Jani Nikula [Mon, 9 May 2022 12:03:02 +0000 (15:03 +0300)]
drm/edid: add struct drm_edid container
Introduce new opaque type struct drm_edid to encapsulate the EDID data
and the size allocated for it. The contents will be private to
drm_edid.c.
There are a number of reasons for adding a container around struct edid:
* struct edid is a raw blob pointer to data that usually originates
outside of the kernel. Its size is contained within the structure.
* There's no way to attach meta information (such as allocated memory
size) to struct edid.
* Validation of the EDID blob and its size become crucial, and it's
spread all over the subsystem, with varying levels of accuracy.
* HDMI Forum has introduced an HF-EEODB extension that defines an
override EDID size within an EDID extension. The size allocated for an
EDID depends on whether the allocator understands the HF-EEODB
extension. Given a struct edid *, it's impossible to know how much
memory was actually allocated for it.
There are also some reasons for making the container type struct
drm_edid opaque and private to drm_edid.c:
* Have only one place for creating and parsing the EDID, to avoid
duplicating bugs.
* Prepare for reading a pure DisplayID 2.0 from its own DDC address, and
adding it within the same struct drm_edid container, transparently,
and for all drivers.
* With the idea that the drm_edid objects are immutable during their
lifetimes, it will be possible to refcount them and reduce EDID
copying everywhere (this is left for future work).
Initially, just add the type. In follow-up, we'll start converting the
guts of drm_edid.c to use it, and finally add interfaces around it.
projects / kernel.git / log