If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which
is actually skb->cb, and IPCB(skb_in)->opt will be used in
__ip_options_echo. It is possible that memcpy is out of bounds and lead
to stack overflow.
We should clear skb->cb before ip_local_out or ip6_local_out.
v2:
1. clean the stack info
2. use IPCB/IP6CB instead of skb->cb
To reproduce(ipvlan with IPVLAN_MODE_L3):
Env setting:
=======================================================
modprobe ipvlan ipvlan_default_mode=1
sysctl net.ipv4.conf.eth0.forwarding=1
iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j
MASQUERADE
ip link add gw link eth0 type ipvlan
ip -4 addr add 20.0.0.254/24 dev gw
ip netns add net1
ip link add ipv1 link eth0 type ipvlan
ip link set ipv1 netns net1
ip netns exec net1 ip link set ipv1 up
ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1
ip netns exec net1 route add default gw 20.0.0.254
ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10%
ifconfig gw up
iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with
icmp-port-unreachable
=======================================================
And then excute the shell(curl any address of eth0 can reach):
for((i=1;i<=100000;i++))
do
ip netns exec net1 curl x.x.x.x:8888
done
=======================================================
Fixes: 35b69229bc37 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40@huawei.com> Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: b762de0d38a2 ("vlan: consolidate VLAN parsing code and limit max parsing depth") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
do_recvmmsg() can write to sk->sk_err from multiple threads.
As said before, many other points reading or writing sk_err
need annotations.
Fixes: b054cf52e1b8 ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1:
netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022
sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017
____sys_recvmsg+0x2db/0x310 net/socket.c:2718
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00 -> 0x01
Fixes: 285ec1599c50 ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
First turn this BUG_ON into a WARN. I think it was triggered
via enable_hooks=1 flag.
When this flag is turned on, the conntrack hooks are registered
before nf_ct_hook pointer gets assigned.
This opens a short window where packets enter the conntrack machinery,
can have skb->_nfct set up and a subsequent kfree_skb might occur
before nf_ct_hook is set.
Call nf_conntrack_init_end() to set nf_ct_hook before we register the
pernet ops.
Fixes: ae08d40e69a0 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: d28cee41da7e ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Fixes: 4f105e5ffd1d ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix kernel-doc warnings from the kernel test robot:
jornada720_ssp.c:24: warning: Function parameter or member 'jornada_ssp_lock' not described in 'DEFINE_SPINLOCK'
jornada720_ssp.c:24: warning: expecting prototype for arch/arm/mac(). Prototype was for DEFINE_SPINLOCK() instead
jornada720_ssp.c:34: warning: Function parameter or member 'byte' not described in 'jornada_ssp_reverse'
jornada720_ssp.c:57: warning: Function parameter or member 'byte' not described in 'jornada_ssp_byte'
jornada720_ssp.c:85: warning: Function parameter or member 'byte' not described in 'jornada_ssp_inout'
After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle
detection more robust"), fw_devlink prints an error when consumer
devices don't have their fwnode set. This used to be ignored silently.
Set the fwnode mipi_dsi_device so fw_devlink can find them and properly
track their dependencies.
This fixes errors like this:
[ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8
[ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi
There are many places where both the fwnode_handle and the of_node of a
device need to be populated. Add a function which does both so that we
have consistency.
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a26cc2934331 ("drm/mipi-dsi: Set the fwnode for mipi_dsi_device") Signed-off-by: Sasha Levin <sashal@kernel.org>
When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.
One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.
CPU0
----
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
// e.g. timer interrupt handler runs at this moment
some_timer_func() {
kmalloc(GFP_ATOMIC) {
__alloc_pages_slowpath() {
read_seqbegin(&zonelist_update_seq) {
// spins forever because zonelist_update_seq.seqcount is odd
}
}
}
}
// e.g. timer interrupt handler finishes
write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
}
This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests. But Michal Hocko does not know whether we should go with this
approach.
Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.
preventing interrupt context from calling kmalloc(GFP_ATOMIC)
and
preventing printk() from calling console_flush_all()
while zonelist_update_seq.seqcount is odd.
Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by
disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)
and
disabling synchronous printk() in order to avoid console_flush_all()
.
As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...
Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp Fixes: 9ad3553b5736 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation") Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Petr Mladek <pmladek@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Patrick Daly <quic_pdaly@quicinc.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will
not be freed through rpi_firmware_delete(), fix this leak by calling
kfree() in the error path.
Fixes: 2284abf319f5 ("firmware: raspberrypi: Keep count of all consumers") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117070636.3849773-1-yangyingliang@huawei.com Acked-by: Joel Savitz <jsavitz@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following commit 160b21398825 ("drm/msm: fix unbalanced
pm_runtime_enable in adreno_gpu_{init, cleanup}"), any call to
adreno_unbind() will disable runtime PM twice, as indicated by the call
trees below:
Note that pm_runtime_force_suspend() is called right before
gpu->funcs->destroy() and both functions are called unconditionally.
With recent addition of the eDP AUX bus code, this problem manifests
itself when the eDP panel cannot be found yet and probing is deferred.
On the first probe attempt, we disable runtime PM twice as described
above. This then causes any later probe attempt to fail with
[drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13
preventing the driver from loading.
As there seem to be scenarios where the aNxx_destroy() functions are not
called from adreno_unbind(), simply removing pm_runtime_disable() from
inside adreno_unbind() does not seem to be the proper fix. This is what
commit 160b21398825 ("drm/msm: fix unbalanced pm_runtime_enable in
adreno_gpu_{init, cleanup}") intended to fix. Therefore, instead check
whether runtime PM is still enabled, and only disable it in that case.
Fixes: 160b21398825 ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Link: https://lore.kernel.org/r/20220606211305.189585-1-luzmaximilian@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rename of generic_pm_domain.slave_links to
generic_pm_domain.child_links accidentally dropped the TAB to align the
member's comment. Re-add the lost TAB to restore indentation.
Fixes: 8d89926c46f39c6a ("PM: domains: Fix up terminology with parent/child") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[ rjw: Minor subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[This patch implements subset of original commit 3d954c5c7239 ("printk:
remove NMI tracking") where commit 1007843a9190 ("mm/page_alloc: fix
potential deadlock on zonelist_update_seq seqlock") depends on, for
commit 9ad3553b5736 ("mm/page_alloc: fix race condition between
build_all_zonelists and page allocation") was backported to stable.]
All NMI contexts are handled the same as the safe context: store the
message and defer printing. There is no need to have special NMI
context tracking for this. Using in_nmi() is enough.
There are several parts of the kernel that are manually calling into
the printk NMI context tracking in order to cause general printk
deferred printing:
For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new
function pair printk_deferred_enter/exit that explicitly achieves the
same objective.
For ftrace, remove the printk context manipulation completely. It was
added in commit 6303a569c680 ("printk/nmi: Prevent deadlock when
accessing the main log buffer in NMI"). The purpose was to enforce
storing messages directly into the ring buffer even in NMI context.
It really should have only modified the behavior in NMI context.
There is no need for a special behavior any longer. All messages are
always stored directly now. The console deferring is handled
transparently in vprintk().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
[pmladek@suse.com: Remove special handling in ftrace.c completely. Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de
[penguin-kernel: Copy only printk_deferred_{enter,safe}() definition ] Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
d4fb4159db01 ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
Use down_read_nested() and down_write_nested() when taking the
ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in
the path to the PCI root bus as lock subclass parameter.
This fixes the following false-positive lockdep report when unplugging a
Lenovo X1C8 from a Lenovo 2nd gen TB3 dock:
pcieport 0000:06:01.0: pciehp: Slot(1): Link Down
pcieport 0000:06:01.0: pciehp: Slot(1): Card not present
============================================
WARNING: possible recursive locking detected
5.16.0-rc2+ #621 Not tainted
--------------------------------------------
irq/124-pciehp/86 is trying to acquire lock: ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80
but task is already holding lock: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
other info that might help us debug this:
Possible unsafe locking scenario:
This lockdep warning is triggered because with Thunderbolt, hotplug ports
are nested. When removing multiple devices in a daisy-chain, each hotplug
port's reset_lock may be acquired recursively. It's never the same lock, so
the lockdep splat is a false positive.
Because locks at the same hierarchy level are never acquired recursively, a
per-level lockdep class is sufficient to fix the lockdep warning.
The choice to use one lockdep subclass per pcie-hotplug controller in the
path to the root-bus was made to conserve class keys because their number
is limited and the complexity grows quadratically with number of keys
according to Documentation/locking/lockdep-design.rst.
When we receive a flush command (or "barrier" in DRBD), we currently use
a REQ_OP_FLUSH with the REQ_PREFLUSH flag set.
The correct way to submit a flush bio is by using a REQ_OP_WRITE without
any data, and set the REQ_PREFLUSH flag.
Since commit b4a6bb3a67aa ("block: add a sanity check for non-write
flush/fua bios"), this triggers a warning in the block layer, but this
has been broken for quite some time before that.
So use the correct set of flags to actually make the flush happen.
Cc: Christoph Hellwig <hch@infradead.org> Cc: stable@vger.kernel.org Fixes: 7d16f2c4c8d8 ("drbd: allow parallel flushes for multi-volume resources") Reported-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Thu, 11 May 2023 12:32:44 +0000 (15:32 +0300)]
serial: 8250: Fix serial8250_tx_empty() race with DMA Tx
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.
It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.
Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.
Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.
Fixes: 1cfdaf0559982 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f) Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Thu, 11 May 2023 12:32:43 +0000 (15:32 +0300)]
tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.
Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).
The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.
In ext4_xattr_move_to_block(), the value of the extended attribute
which we need to move to an external block may be allocated by
kvmalloc() if the value is stored in an external inode. So at the end
of the function the code tried to check if this was the case by
testing entry->e_value_inum.
However, at this point, the pointer to the xattr entry is no longer
valid, because it was removed from the original location where it had
been stored. So we could end up calling kvfree() on a pointer which
was not allocated by kvmalloc(); or we could also potentially leak
memory by not freeing the buffer when it should be freed. Fix this by
storing whether it should be freed in a separate variable.
If a malicious fuzzer overwrites the ext4 superblock while it is
mounted such that the s_first_data_block is set to a very large
number, the calculation of the block group can underflow, and trigger
a BUG_ON check. Change this to be an ext4_warning so that we don't
crash the kernel.
In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.
Normally the extended attributes in the inode body would have been
checked when the inode is first opened, but if someone is writing to
the block device while the file system is mounted, it's possible for
the inode table to get corrupted. Add bounds checking to avoid
reading beyond the end of allocated memory if this happens.
In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock
by calling ext4_handle_dirty_dirblock() when it already has taken the
directory lock. There is a similar self-deadlock in
ext4_incvert_inline_data_nolock() for data files which we'll fix at
the same time.
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
When using cached extent stored in extent status tree in tree->cache_es
another process holding ei->i_es_lock for reading can be racing with us
setting new value of tree->cache_es. If the compiler would decide to
refetch tree->cache_es at an unfortunate moment, it could result in a
bogus in_range() check. Fix the possible race by using READ_ONCE() when
using tree->cache_es only under ei->i_es_lock for reading.
Replace
le16_to_cpu(sbi->s_es->s_desc_size)
with
sbi->s_desc_size
It reduces ext4's compiled text size, and makes the code more efficient
(we remove an extra indirect reference and a potential byte
swap on big endian systems), and there is no downside. It also avoids the
potential KASAN / syzkaller failure, as a bonus.
Acctually, blocks per group is 64, but block bitmap indicate at least has
128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's
bitmap if set.
To resolve above issue, add check like fsck "Padding at end of block bitmap is
not set".
Cc: stable@kernel.org Reported-by: syzbot+68223fe9f6c95ad43bed@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230116020015.1506120-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To fully utilize the BT polling/refresh rate, a few input events
are sent together to reduce event delay. This causes issue to the
timestamp generated by input_sync since all the events in the same
packet would pretty much have the same timestamp. This patch inserts
time interval to the events by averaging the total time used for
sending the packet.
This decision was mainly based on observing the actual time interval
between each BT polling. The interval doesn't seem to be constant,
due to the network and system environment. So, using solutions other
than averaging doesn't end up with valid timestamps.
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.
As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the logical place to put the backlight device, and it also
fixes a kernel crash if the MIPI host is removed. Previously the
backlight device would be unregistered twice when this happened - once
as a child of the MIPI host through `mipi_dsi_host_unregister`, and
once when the panel device is destroyed.
Fixes: 661bbe90a292 ("drm/panel: otm8009a: Use new backlight API") Signed-off-by: James Cowgill <james.cowgill@blaize.com> Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from nmi_debug_setup().
Fixes: dd620cf79834 ("sh: nmi_debug support.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: stable@vger.kernel.org Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20230306040037.20350-3-rdunlap@infradead.org Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_OF_EARLY_FLATTREE and CONFIG_SH_DEVICE_TREE are not set,
SH3 build fails with a call to early_init_dt_scan(), so in
arch/sh/kernel/setup.c and arch/sh/kernel/head_32.S, use
CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF_FLATTREE.
Fixes this build error:
../arch/sh/kernel/setup.c: In function 'sh_fdt_init':
../arch/sh/kernel/setup.c:262:26: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration]
262 | if (!dt_virt || !early_init_dt_scan(dt_virt)) {
Fixes: 3644c628879d ("sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE") Fixes: efb73a599e55 ("sh: fix memory corruption of unflattened device tree") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: devicetree@vger.kernel.org Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: linux-sh@vger.kernel.org Cc: stable@vger.kernel.org Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20230306040037.20350-4-rdunlap@infradead.org Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a warning that was reported by the kernel test robot:
In file included from ../include/math-emu/soft-fp.h:27,
from ../arch/sh/math-emu/math.c:22:
../arch/sh/include/asm/sfp-machine.h:17: warning: "__BYTE_ORDER" redefined
17 | #define __BYTE_ORDER __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:21:
../arch/sh/math-emu/sfp-util.h:71: note: this is the location of the previous definition
71 | #define __BYTE_ORDER __LITTLE_ENDIAN
Fixes: 45e1921b951b ("sh: define __BIG_ENDIAN for math-emu") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202111121827.6v6SXtVv-lkp@intel.com Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20230306040037.20350-5-rdunlap@infradead.org Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When inotify_freeing_mark() races with inotify_handle_inode_event() it
can happen that inotify_handle_inode_event() sees that i_mark->wd got
already reset to -1 and reports this value to userspace which can
confuse the inotify listener. Avoid the problem by validating that wd is
sensible (and pretend the mark got removed before the event got
generated otherwise).
CC: stable@vger.kernel.org Fixes: cbb36f453190 ("inotify: fix error paths in inotify_update_watch")
Message-Id: <20230424163219.9250-1-jack@suse.cz> Reported-by: syzbot+4a06d4373fd52f0b2f9c@syzkaller.appspotmail.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change type of pcchunk->Length from u32 to u64 to match
smb2_copychunk_range arguments type. Fixes the problem where performing
server-side copy with CIFS_IOC_COPYCHUNK_FILE ioctl resulted in incomplete
copy of large files while returning -EINVAL.
Fixes: 79abd0e36f08 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files") Cc: <stable@vger.kernel.org> Signed-off-by: Pawel Witek <pawel.ireneusz.witek@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check nodesize to sectorsize in alignment check in print_extent_item.
The comment states that and this is correct, similar check is done
elsewhere in the functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 73d6f4ac708c ("btrfs: require only sector size alignment for parent eb bytenr") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris noticed in his simple quotas testing that he was getting a leak
with Sweet Tea's change to subvol create that stopped doing a
transaction commit. This was just a side effect of that change.
In the delayed inode code we have an optimization that will free extra
reservations if we think we can pack a dir item into an already modified
leaf. Previously this wouldn't be triggered in the subvolume create
case because we'd commit the transaction, it was still possible but
much harder to trigger. It could actually be triggered if we did a
mkdir && subvol create with qgroups enabled.
This occurs because in btrfs_insert_delayed_dir_index(), which gets
called when we're adding the dir item, we do the following:
The temporary block rsv just has ->qgroup_rsv_reserved set,
->qgroup_rsv_size == 0. The optimization in
btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then
later on when we call btrfs_subvolume_release_metadata() which has
qgroup_to_release is set to 0, and we do not convert the reserved
metadata space.
The problem here is that the block rsv code has been unconditionally
messing with ->qgroup_rsv_reserved, because the main place this is used
is delalloc, and any time we call btrfs_block_rsv_release() we do it
with qgroup_to_release set, and thus do the proper accounting.
The subvolume code is the only other code that uses the qgroup
reservation stuff, but it's intermingled with the above optimization,
and thus was getting its reservation freed out from underneath it and
thus leaking the reserved space.
The solution is to simply not mess with the qgroup reservations if we
don't have qgroup_to_release set. This works with the existing code as
anything that messes with the delalloc reservations always have
qgroup_to_release set. This fixes the leak that Boris was observing.
Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A call to btrfs_prev_leaf() may end up returning a path that points to the
same item (key) again. This happens if while btrfs_prev_leaf(), after we
release the path, a concurrent insertion happens, which moves items off
from a sibling into the front of the previous leaf, and an item with the
computed previous key does not exists.
For example, suppose we have the two following leaves:
If we call btrfs_prev_leaf(), from btrfs_previous_item() for example, with
a path pointing to leaf B and slot 0 and the following happens:
1) At btrfs_prev_leaf() we compute the previous key to search as:
(300 96 19), which is a key that does not exists in the tree;
2) Then we call btrfs_release_path() at btrfs_prev_leaf();
3) Some other task inserts a key at leaf A, that sorts before the key at
slot 20, for example it has an objectid of 299. In order to make room
for the new key, the key at slot 22 is moved to the front of leaf B.
This happens at push_leaf_right(), called from split_leaf().
4) At btrfs_prev_leaf() we call btrfs_search_slot() for the computed
previous key: (300 96 19). Since the key does not exists,
btrfs_search_slot() returns 1 and with a path pointing to leaf B
and slot 1, the item with key (300 96 20);
5) This makes btrfs_prev_leaf() return a path that points to slot 1 of
leaf B, the same key as before it was called, since the key at slot 0
of leaf B (300 96 16) is less than the computed previous key, which is
(300 96 19);
6) As a consequence btrfs_previous_item() returns a path that points again
to the item with key (300 96 20).
For some users of btrfs_prev_leaf() or btrfs_previous_item() this may not
be functional a problem, despite not making sense to return a new path
pointing again to the same item/key. However for a caller such as
tree-log.c:log_dir_items(), this has a bad consequence, as it can result
in not logging some dir index deletions in case the directory is being
logged without holding the inode's VFS lock (logging triggered while
logging a child inode for example) - for the example scenario above, in
case the dir index keys 17, 18 and 19 were deleted in the current
transaction.
CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In elf_read_build_id(), if gnu build_id is found, should return the size of
the actually copied data. If descsz is greater thanBuild_ID_SIZE,
write_buildid data access may occur.
Fixes: f08e5a2b9c749ace ("perf symbols: Fix issue with binaries using 16-bytes buildids (v2)") Reported-by: Will Ochowicz <Will.Ochowicz@genusplc.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Will Ochowicz <Will.Ochowicz@genusplc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/lkml/CWLP265MB49702F7BA3D6D8F13E4B1A719C649@CWLP265MB4970.GBRP265.PROD.OUTLOOK.COM/T/ Link: https://lore.kernel.org/r/20230427012841.231729-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Addresses of two data structure members were determined before
corresponding null pointer checks in the implementation of the function
“sort__sym_from_cmp”.
Thus avoid the risk for undefined behaviour by removing extra
initialisations for the local variables “from_l” and “from_r” (also
because they were already reassigned with the same value behind this
pointer check).
This issue was detected by using the Coccinelle software.
Fixes: 9af306ddd326c150 ("perf tools: Fix report -F symbol_from for data without branch info") Signed-off-by: <elfring@users.sourceforge.net> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/cocci/54a21fea-64e3-de67-82ef-d61b90ffad05@web.de/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c2981c6a13746261 ("perf vendor events powerpc: Update POWER9
events") added and updated power9 PMU JSON events. However some of the
JSON events which are part of other.json and pipeline.json files,
contains UTF-8 characters in their brief description. Having UTF-8
character could breaks the perf build on some distros.
Fix this issue by removing the UTF-8 characters from other.json and
pipeline.json files.
For multi-queue and large ring-size use case, the following error
occurred when free_unused_bufs:
rcu: INFO: rcu_sched self-detected stall on CPU.
Fixes: 4724d194c2dc ("virtio_net: multiqueue support") Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch separates two functions for freeing sq buf and rq buf from
free_unused_bufs().
When supporting the enable/disable tx/rq queue in the future, it is
necessary to support separate recovery of a sq buf or a rq buf.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-40-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: f8bb51043945 ("virtio_net: suppress cpu stall when free_unused_bufs") Signed-off-by: Sasha Levin <sashal@kernel.org>
The multi-chip module MT7530 switch with a 40 MHz oscillator on the
MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using
trgmii.
This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL,
hence using the ncpo1 value, 0x0780.
My testing shows this value works on Unielec U7621-06, Bartel's testing
shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices
tested have got 40 MHz oscillators.
Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The
definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code
whilst 150 MHz PLL don't.
Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz
oscillator on the said MT7621 SoCs works fine because the ncpo1 value
defined for it is for 125 MHz PLL.
Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL
ncpo1 values for both oscillator frequencies.
This patch adds a new case to handle the situation where the
device does not support any input methods in the
`snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code
to indicate that no input methods are supported on the device.
Fixes: a59ce4465ca7 ("[ALSA] Add Native Instrument usb audio device support") Signed-off-by: Ruliang Lin <u202112092@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It seems that ethtool is calling into .get_rxnfc more often with
ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't
need to log a message about it, just return not supported.
Fixes: f0e09614e85d6 ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in
seconds, so fix the point at which sendmsg() applies it to the call to
convert to jiffies from seconds, not milliseconds.
Fixes: 5c7c3502b731 ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel") Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:
5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
altname enp179s0f1np1
As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit cfaa46b97f12 ("gue: TX support for using remote checksum offload option").
Fixes: 0fa61b32cf14 ("sit: add IPv4 over IPv4 support") Reported-by: Palash Oswal <oswalpalash@gmail.com> Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Error handler of tcf_block_bind() frees the whole bo->cb_list on error.
However, by that time the flow_block_cb instances are already in the driver
list because driver ndo_setup_tc() callback is called before that up the
call chain in tcf_block_offload_cmd(). This leaves dangling pointers to
freed objects in the list and causes use-after-free[0]. Fix it by also
removing flow_block_cb instances from driver_list before deallocating them.
[0]:
[ 279.868433] ==================================================================
[ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0
[ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963
[ 279.987532] The buggy address belongs to the object at ffff888147e2bf00
which belongs to the cache kmalloc-192 of size 192
[ 279.989747] The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0)
[ 280.002386] Memory state around the buggy address:
[ 280.003338] ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.004781] ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.007700] ^
[ 280.008592] ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 280.010035] ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.011564] ==================================================================
Fixes: 1d978efbb5b6 ("net: sched: use flow block API") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.
Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.
Fixes: 8161e92546f7 ("net/ncsi: Configure multi-package, multi-channel modes with failover") Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com Fixes: a0560374714b ("relay file read: start-pos fix") Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com> Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com> Reviewed-by: Zhou Kete <zhou.kete@h3c.com> Reviewed-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When reading, read_pos should start with bytes_consumed, not file->f_pos.
Because when there is more than one reader, the read_pos corresponding to
file->f_pos may have been consumed, which will cause the data that has
been consumed to be read and the bytes_consumed update error.
A failure loading the safexcel driver results in the following warning
on boot, because the IRQ affinity has not been correctly cleaned up.
Ensure we clean up the affinity and workqueues on a failure to load the
driver.
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: a33ee47a80c6 ("dm verity: add 'check_at_most_once' option to only validate hashes once") Cc: stable@vger.kernel.org Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com> Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Using flexible array is more straight forward. It
- saves 1 pointer in the 'zynqmp_ipi_pdata' structure
- saves an indirection when using this array
- saves some LoC and avoids some always spurious pointer arithmetic
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Zhouyi Zhou <zhouzhouyi@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: rcu <rcu@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: a3f0bd1aa224 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel") Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a nohz_full CPU is looping in the kernel, the scheduling-clock tick
might nevertheless remain disabled. In !PREEMPT kernels, this can
prevent RCU's attempts to enlist the aid of that CPU's executions of
cond_resched(), which can in turn result in an arbitrarily delayed grace
period and thus an OOM. RCU therefore needs a way to enable a holdout
nohz_full CPU's scheduler-clock interrupt.
This commit therefore provides a new TICK_DEP_BIT_RCU value which RCU can
pass to tick_dep_set_cpu() and friends to force on the scheduler-clock
interrupt for a specified CPU or task. In some cases, rcutorture needs
to turn on the scheduler-clock tick, so this commit also exports the
relevant symbols to GPL-licensed modules.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 58d766824264 ("tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem") Signed-off-by: Sasha Levin <sashal@kernel.org>
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
After a standalone CBR (not associated with TSC), update the cycles
reference timestamp and reset the cycle count, so that CYC timestamps
are calculated relative to that point with the new frequency.
Fixes: ae97ce70a4b230bc ("perf tools: Add Intel PT support for decoding CYC packets") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 9b395806b305daed ("perf record: Add support for using symbols in address filters") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
The DASD driver does not kick the requeue list when requeuing IO requests
to the blocklayer. This might lead to hanging blockdevice when there is
no other trigger for this.
Fix by automatically kick the requeue list when requeuing DASD requests
to the blocklayer.
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
Below incompatibilities between Python2 and Python3 made lx-timerlist fail
to run under Python3.
o xrange() is replaced by range() in Python3
o bytes and str are different types in Python3
o the return value of Inferior.read_memory() is memoryview object in
Python3
akpm: cc stable so that older kernels are properly debuggable under newer
Python.
Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Peng Liu <liupeng17@lenovo.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clk_cifout is derived from clk_cifout_src through an integer divider
limited to 32. clk_cifout_src is a child of either cpll, gpll or npll
without any possibility of a divider of any sort. The default clock
parent is cpll.
Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in
order to find the real closest possible rate for clk_cifout and not one
derived from cpll only.
Multiple IPI channels are mapped to same interrupt handler.
Current isr implementation handles only one channel per isr.
Fix this behavior by checking isr status bit of all child
mailbox nodes.
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit f10a5c06b81d ("md/raid10: Allow skipping recovery when clean arrays are assembled") Fixes: f10a5c06b81d ("md/raid10: Allow skipping recovery when clean arrays are assembled") Cc: stable@vger.kernel.org Signed-off-by: Li Nan <linan122@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
projects / kernel.git / log