Alex Deucher [Mon, 25 Jun 2018 18:17:41 +0000 (13:17 -0500)]
PCI: Export pcie_get_speed_cap and pcie_get_width_cap
So drivers can use them. This can be used to replace
duplicate code in the drm subsystem.
Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 2 Jul 2018 19:35:36 +0000 (14:35 -0500)]
drm/amdgpu: switch firmware path for SI parts
Use separate firmware path for amdgpu to avoid conflicts
with radeon on SI parts.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 2 Jul 2018 19:32:28 +0000 (14:32 -0500)]
drm/amdgpu: switch firmware path for CIK parts (v2)
Use separate firmware path for amdgpu to avoid conflicts
with radeon on CIK parts.
v2: squash in logic simplification (Alex)
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Fri, 29 Jun 2018 11:23:25 +0000 (13:23 +0200)]
drm/amdgpu: fix user fence write race condition
The buffer object backing the user fence is reserved using the non-user
fence, i.e., as soon as the non-user fence is signaled, the user fence
buffer object can be moved or even destroyed.
Therefore, emit the user fence first.
Both fences have the same cache invalidation behavior, so this should
have no user-visible effect.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rex zhu [Thu, 28 Jun 2018 05:55:46 +0000 (13:55 +0800)]
drm/amd/pp: Switch the tolerable latency for display
Select the lowest MCLK frequency that is within
the tolerable latency defined in DISPALY
Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 18 Jun 2018 10:49:07 +0000 (18:49 +0800)]
drm/amd/pp: Memory Latency is always 25us on Vega10
For HBM, 25us latency is enough for memory clock switch.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 18 Jun 2018 10:15:15 +0000 (18:15 +0800)]
drm/amd/pp: Convert clock unit to KHz as defined
Convert clock unit 10KHz to KHz as the data sturct defined.
e.g.
struct pp_clock_with_latency {
uint32_t clocks_in_khz;
uint32_t latency_in_us;
};
Meanwhile revert the same conversion in display side.
Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 28 Jun 2018 17:32:27 +0000 (12:32 -0500)]
drm/amdgpu: update uvd_v6_0_ring_vm_funcs to use new nop packet
Was missed when updating the uvd 6 module.
Fixes: 27208f59de (drm/amdgpu: fix insert nop for UVD6 ring) Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 17:41:21 +0000 (12:41 -0500)]
drm/amdgpu/vce: simplify vce instance setup
Set the me instance in early init and use that rather than
calculating the instance based on the ring pointer.
Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 25 Jun 2018 17:24:10 +0000 (12:24 -0500)]
drm/amdgpu/sdma: simplify sdma instance setup
Set the me instance in early init and use that rather than
calculating the instance based on the ring pointer.
Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To hopefully make the code dealing with GPU vs CPU pages a little
clearer.
Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Fri, 15 Jun 2018 14:37:03 +0000 (16:37 +0200)]
drm/amdgpu: Use gmc_vram_full_visible in vram_mgr_bo_invisible_size
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lyude Paul [Tue, 26 Jun 2018 01:09:07 +0000 (21:09 -0400)]
drm/amdgpu: Dynamically probe for ATIF handle (v2)
The other day I was testing one of the HP laptops at my office with an
i915/amdgpu hybrid setup and noticed that hotplugging was non-functional
on almost all of the display outputs. I eventually discovered that all
of the external outputs were connected to the amdgpu device instead of
i915, and that the hotplugs weren't being detected so long as the GPU
was in runtime suspend. After some talking with folks at AMD, I learned
that amdgpu is actually supposed to support hotplug detection in runtime
suspend so long as the OEM has implemented it properly in the firmware.
On this HP ZBook 15 G4 (the machine in question), amdgpu wasn't managing
to find the ATIF handle at all despite the fact that I could see acpi
events being sent in response to any hotplugging. After going through
dumps of the firmware, I discovered that this machine did in fact
support ATIF, but that it's ATIF method lived in an entirely different
namespace than this device's handle (the device handle was
\_SB_.PCI0.PEG0.PEGP, but ATIF lives in ATPX's handle at
\_SB_.PCI0.GFX0).
So, fix this by probing ATPX's ACPI parent's namespace if we can't find
ATIF elsewhere, along with storing a pointer to the proper handle to use
for ATIF and using that instead of the device's handle.
This fixes HPD detection while in runtime suspend for this ZBook!
v2: Update the comment to reflect how the namespaces are arranged
based on the system configuration. (Alex)
Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lyude Paul [Tue, 26 Jun 2018 01:09:06 +0000 (21:09 -0400)]
drm/amdgpu: Add amdgpu_atpx_get_dhandle()
Since it seems that some vendors are storing the ATIF ACPI methods under
the same handle that ATPX lives under instead of the device's own
handle, we're going to need to be able to retrieve this handle later so
we can probe for ATIF there.
Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lyude Paul [Tue, 26 Jun 2018 01:09:04 +0000 (21:09 -0400)]
drm/amdgpu: Make struct amdgpu_atif private to amdgpu_acpi.c
Currently, there is nothing in amdgpu that actually uses these structs
other than amdgpu_acpi.c. Additionally, since we're about to start
saving the correct ACPI handle to use for calling ATIF in this struct
this saves us from having to handle making sure that the acpi_handle
(and by proxy, the type definition for acpi_handle and all of the other
acpi headers) doesn't need to be included within the amdgpu_drv struct
itself. This follows the example set by amdgpu_atpx_handler.c.
Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 08:48:43 +0000 (16:48 +0800)]
drm/amd/powerplay: cosmetic fix
Fix coding style and drop unused variable.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 08:46:40 +0000 (16:46 +0800)]
drm/amd/powerplay: correct vega12 thermal support as true
Thermal support is enabled on vega12.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 09:22:33 +0000 (17:22 +0800)]
drm/amd/powerplay: set vega12 pre display configurations
Set num_displays to 0 and force uclk high as part of the mode
set sequence.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 08:40:57 +0000 (16:40 +0800)]
drm/amd/powerplay: apply clocks adjust rules on power state change
This add the apply_clocks_adjust_rules callback which is used
to validate the clock settings on a power state change.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 08:33:40 +0000 (16:33 +0800)]
drm/amd/powerplay: correct vega12 max num of dpm level
Use MAX_NUM_CLOCKS instead of VG12_PSUEDO* macros for
the max number of dpm levels.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 20 Jun 2018 04:28:10 +0000 (12:28 +0800)]
drm/amd/powerplay: drop unnecessary uclk hard min setting
We don't need to set uclk hard min here because this will
be set with other clocks on power state change.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 20 Jun 2018 04:24:29 +0000 (12:24 +0800)]
drm/amd/powerplay: correct smc display config for multi monitor
Need to take into account multi-head with synced displays.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 08:25:14 +0000 (16:25 +0800)]
drm/amd/powerplay: initialize uvd/vce powergate status v4
On UVD/VCE dpm enabled/disabled, the powergate status will be
set as false/true. So that we will not try to ungate/gate them(
enable/disable their dpm) again.
v2: added check for uvd/vce powergate status before gating
v3: fix typo in description
v4: warning fix (Alex)
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 08:04:17 +0000 (16:04 +0800)]
drm/amd/powerplay: revise clock level setup
Make sure the clock level set only on dpm enabled. Also uvd/vce/soc
clock also changed correspondingly.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 07:41:44 +0000 (15:41 +0800)]
drm/amd/powerplay: retrieve all clock ranges on startup
So that we do not need to use PPSMC_MSG_GetMin/MaxDpmFreq to
get the clock ranges on runtime. Since that causes some problems.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the soft/hard min/max level correctly and
handle the dpm disabled situation.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 09:38:54 +0000 (17:38 +0800)]
drm/amd/powerplay: drop the acg fix
This workaround is not needed any more.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Mon, 11 Jun 2018 07:20:39 +0000 (15:20 +0800)]
drm/amd/powerplay: smc_dpm_info structure change
A new member Vr2_I2C_address is added.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vbios firmware structure changed between v3_1 and v3_2. So,
the code to setup bootup values needs different paths based
on header version.
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. CG/PG enablement are part of gpu hw ip initialize, we should
wait for them complete. otherwise, there are some potential conflicts,
for example, Suspend and CG enablement concurrently.
2. better run ib test after hw initialize completely. That is to say,
ib test should be after CG/PG enablement. otherwise, the test will
not cover the cg/pg/poweroff enable case.
Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rex zhu [Wed, 27 Jun 2018 09:34:37 +0000 (17:34 +0800)]
drm/amd/display: Fix dm-pp clks type convert error
fix a typo when convert displayphyclk type.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rex zhu [Wed, 27 Jun 2018 09:35:40 +0000 (17:35 +0800)]
drm/amd/display: Drop unnecessary header file
powerplay implement hwmgr_function table for all supported asics in
order to conceal the asic's detail infomation. so no need to include
the smu10_hwmgr.h.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stefan Agner [Sun, 17 Jun 2018 08:53:38 +0000 (10:53 +0200)]
drm/amd/display: don't initialize result
The wrong enum type is used to initialize the result, leading to a
warning when using clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:1998:26: warning:
implicit conversion from enumeration type 'enum ddc_result' to different
enumeration type 'enum dc_status' [-Wenum-conversion]
enum dc_status result = DDC_RESULT_UNKNOWN;
~~~~~~ ^~~~~~~~~~~~~~~~~~
1 warning generated.
Initialization of result is unnecessary anyway, just drop the
initialization.
Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything in the flush code path (i.e. waiting for SW queue
to become empty) names with *_flush()
and everything in the release code path names *_fini()
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything in the flush code path (i.e. waiting for SW queue
to become empty) names with *_flush()
and everything in the release code path names *_fini()
This patch also effect the amdgpu and etnaviv drivers which
use those functions.
v2:
Also pplay the change to vd3.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Tue, 5 Jun 2018 13:14:36 +0000 (09:14 -0400)]
drm/amd/display: dal 3.1.52
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yongqiang Sun [Fri, 8 Jun 2018 18:07:53 +0000 (13:07 -0500)]
drm/amd/display: Check scaling ration not viewports params.
In case of roation, width and height in viewport is difference
between viewport and h_active and v_active, while this is not scaling.
The right way is check ratios in scaling data,
to determine it is a scaling case or not.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Thu, 31 May 2018 21:31:14 +0000 (17:31 -0400)]
drm/amd/display: Add dmpp clks types for conversion
Add more cases for dm_pp clks translator into pp clks so
we can pass the right structures to the powerplay.
Use clks translator instead of massive switch statement.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mikita Lipski [Thu, 31 May 2018 18:49:00 +0000 (14:49 -0400)]
drm/amd/display: Enable PPLib calls from DC on linux
Set the powerplay debug flag to false for both Windows and Linux
to allow the calls to pplib. So we can retrieve the clock values
from powerplay instead of using default hardcoded values.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 5 Jun 2018 18:24:53 +0000 (14:24 -0400)]
drm/amd/display: fix potential infinite loop in fbc path
- Fixing integer overflow bug in wait_for_fbc_state_changed()
- Correct the max value of retries for the corresponding warning
Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Tue, 5 Jun 2018 13:14:22 +0000 (09:14 -0400)]
drm/amd/display: dal 3.1.51
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Tue, 5 Jun 2018 13:13:56 +0000 (09:13 -0400)]
drm/amd/display: dal 3.1.50
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Fri, 1 Jun 2018 13:49:06 +0000 (09:49 -0400)]
drm/amd/display: Add front end for dp debugfs files
As part of hardware certification, read-write access to
the link rate, lane count, voltage swing, pre-emphasis,
and PHY test pattern of DP connectors is required. This commit
adds debugfs files that will correspond to these values.
The file operations are not yet implemented: currently
writing or reading them does nothing.
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Tue, 8 May 2018 16:25:29 +0000 (12:25 -0400)]
drm/amd/display: dal 3.1.49
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Tue, 29 May 2018 21:45:05 +0000 (17:45 -0400)]
drm/amd/display: fix use of uninitialized memory
DML does not calculate chroma values for RQ when surface is not YUV, but DC
will unconditionally use the uninitialized values for HW programming.
This does not cause visual corruption since HW will ignore garbage chroma
values when surface is not YUV, but causes presubmission tests to fail
golden value comparison.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes incorrect clock caching and by extension fixes
the clock reporting.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / kernel.git / log