Linus Torvalds [Tue, 15 Nov 2022 18:30:34 +0000 (10:30 -0800)]
Merge tag 'erofs-for-6.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Most patches randomly fix error paths or corner cases in fscache mode
reported recently. One fixes an invalid access relating to fragments
on crafted images.
Summary:
- Fix packed_inode invalid access when reading fragments on crafted
images
- Add a missing erofs_put_metabuf() in an error path in fscache mode
- Fix incorrect `count' for unmapped extents in fscache mode
- Fix use-after-free of fsid and domain_id string when remounting
- Fix missing xas_retry() in fscache mode"
* tag 'erofs-for-6.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix missing xas_retry() in fscache mode
erofs: fix use-after-free of fsid and domain_id string
erofs: get correct count for unmapped range in fscache mode
erofs: put metabuf in error path in fscache mode
erofs: fix general protection fault when reading fragment
Linus Torvalds [Mon, 14 Nov 2022 20:40:51 +0000 (12:40 -0800)]
Merge tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fixes for potential container registration leak for drivers not
implementing a close callback, duplicate container de-registrations,
and a regression in support for bus reset on last device close from
a device set (Anthony DeRossi)
* tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check the device set open count on reset
vfio: Export the device set open count
vfio: Fix container device registration life cycle
Linus Torvalds [Mon, 14 Nov 2022 20:00:03 +0000 (12:00 -0800)]
Merge tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
- Placate "$VARIABLE is used uninitialized" warnings
- omap2: Add missing dependency on GPMC
- qcom: Handle ret from parse with codeword_fixup
* tag 'mtd/fixes-for-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: onenand: omap2: add dependency on GPMC
mtd: rawnand: placate "$VARIABLE is used uninitialized" warnings
mtd: rawnand: qcom: handle ret from parse with codeword_fixup
Jingbo Xu [Mon, 14 Nov 2022 12:19:43 +0000 (20:19 +0800)]
erofs: fix missing xas_retry() in fscache mode
The xarray iteration only holds the RCU read lock and thus may encounter
XA_RETRY_ENTRY if there's process modifying the xarray concurrently.
This will cause oops when referring to the invalid entry.
Fix this by adding the missing xas_retry(), which will make the
iteration wind back to the root node if XA_RETRY_ENTRY is encountered.
Fixes: d435d53228dd ("erofs: change to use asynchronous io for fscache readpage/readahead") Suggested-by: David Howells <dhowells@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com> Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com> Link: https://lore.kernel.org/r/20221114121943.29987-1-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Linus Torvalds [Sun, 13 Nov 2022 15:57:33 +0000 (07:57 -0800)]
Merge tag 'mips-fixes_6.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix jump label branch range check
- check kmalloc failures in Loongson64 kexec
- fix builds with clang-14
- fix char/int handling in pic32
* tag 'mips-fixes_6.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: pic32: treat port as signed integer
MIPS: jump_label: Fix compat branch range check
mips: alchemy: gpio: Include the right header
MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed
MIPS: fix duplicate definitions for exported symbols
mips: boot/compressed: use __NO_FORTIFY
Linus Torvalds [Sun, 13 Nov 2022 15:52:22 +0000 (07:52 -0800)]
Merge tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
Linus Torvalds [Sat, 12 Nov 2022 17:27:15 +0000 (09:27 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.
The sas one is in an unlikely error leg, the debug one is to make it
more standards conformant and the ibmvfc one is to fix a user visible
bug where a failover could lose all paths to the device"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
scsi: ibmvfc: Avoid path failures during live migration
Takashi Iwai [Sat, 12 Nov 2022 08:47:18 +0000 (09:47 +0100)]
ALSA: memalloc: Try dma_alloc_noncontiguous() at first
The latest fix for the non-contiguous memalloc helper changed the
allocation method for a non-IOMMU system to use only the fallback
allocator. This should have worked, but it caused a problem sometimes
when too many non-contiguous pages are allocated that can't be treated
by HD-audio controller.
As a quirk workaround, go back to the original strategy: use
dma_alloc_noncontiguous() at first, and apply the fallback only when
it fails, but only for non-IOMMU case.
We'll need a better fix in the fallback code as well, but this
workaround should paper over most cases.
Linus Torvalds [Sat, 12 Nov 2022 04:27:13 +0000 (20:27 -0800)]
Merge tag 'ata-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"Several libata generic code fixes for rc5:
- Add missing translation of the SYNCHRONIZE CACHE 16 scsi command as
this command is mandatory for host-managed ZBC drives.
The lack of support for it in libata-scsi was causing issues with
some passthrough applications using ZBC drives (from Shin'ichiro).
- Fix the error path of libata-transport host, port, link and device
attributes initialization (from Yingliang).
- Prevent issuing new commands to a drive that is in the NCQ error
state and undergoing recovery (From Niklas).
This bug went unnoticed for a long time as commands issued to a
drive in error state are aborted immediately and retried by the
scsi layer, hiding the useless abort-and-retry sequence"
* tag 'ata-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: do not issue non-internal commands once EH is pending
ata: libata-transport: fix error handling in ata_tdev_add()
ata: libata-transport: fix error handling in ata_tlink_add()
ata: libata-transport: fix error handling in ata_tport_add()
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure
Linus Torvalds [Sat, 12 Nov 2022 01:18:42 +0000 (17:18 -0800)]
Merge tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
Linus Torvalds [Sat, 12 Nov 2022 01:10:13 +0000 (17:10 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Another fix for rodata=full. Since rodata= is not a simple boolean on
arm64 (accepting 'full' as well), it got inadvertently broken by
changes in the core code. If rodata=on is the default and rodata=off
is passed on the kernel command line, rodata_full is never disabled
- Fix gcc compiler warning of shifting 0xc0 into bits 31:24 without an
explicit conversion to u32 (triggered by the AMPERE1 MIDR definition)
- Include asm/ptrace.h in asm/syscall_wrapper.h to fix an incomplete
struct pt_regs type causing the BPF verifier to refuse to load a
tracing program which accesses pt_regs
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Include asm/ptrace.h in syscall_wrapper header.
arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro
arm64: fix rodata=full again
Niklas Cassel [Tue, 8 Nov 2022 23:15:34 +0000 (00:15 +0100)]
ata: libata-core: do not issue non-internal commands once EH is pending
While the ATA specification states that a device should return command
aborted for all commands queued after the device has entered error state,
since ATA only keeps the sense data for the latest command (in non-NCQ
case), we really don't want to send block layer commands to the device
after it has entered error state. (Only ATA EH commands should be sent,
to read the sense data etc.)
Currently, scsi_queue_rq() will check if scsi_host_in_recovery()
(state is SHOST_RECOVERY), and if so, it will _not_ issue a command via:
scsi_dispatch_cmd() -> host->hostt->queuecommand() (ata_scsi_queuecmd())
-> __ata_scsi_queuecmd() -> ata_scsi_translate() -> ata_qc_issue()
Before commit e494f6a72839 ("[SCSI] improved eh timeout handler"),
when receiving a TFES error IRQ, the call chain looked like this:
ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort() ->
ata_qc_complete() -> ata_qc_schedule_eh() -> blk_abort_request() ->
blk_rq_timed_out() -> q->rq_timed_out_fn() (scsi_times_out()) ->
scsi_eh_scmd_add() -> scsi_host_set_state(shost, SHOST_RECOVERY)
Which meant that as soon as an error IRQ was serviced, SHOST_RECOVERY
would be set.
However, after commit e494f6a72839 ("[SCSI] improved eh timeout handler"),
scsi_times_out() will instead call scsi_abort_command() which will queue
delayed work, and the worker function scmd_eh_abort_handler() will call
scsi_eh_scmd_add(), which calls scsi_host_set_state(shost, SHOST_RECOVERY).
So now, after the TFES error IRQ has been serviced, we need to wait for
the SCSI workqueue to run its work before SHOST_RECOVERY gets set.
It is worth noting that, even before commit e494f6a72839 ("[SCSI] improved
eh timeout handler"), we could receive an error IRQ from the time when
scsi_queue_rq() checks scsi_host_in_recovery(), to the time when
ata_scsi_queuecmd() is actually called.
In order to handle both the delayed setting of SHOST_RECOVERY and the
window where we can receive an error IRQ, add a check against
ATA_PFLAG_EH_PENDING (which gets set when servicing the error IRQ),
inside ata_scsi_queuecmd() itself, while holding the ap->lock.
(Since the ap->lock is held while servicing IRQs.)
Fixes: e494f6a72839 ("[SCSI] improved eh timeout handler") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Linus Torvalds [Fri, 11 Nov 2022 22:02:44 +0000 (14:02 -0800)]
Merge tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:
- Tweak for the TCP zero-copy io_uring self test (Pavel)
- Rather than use our internal cached value of number of CQ events
available, use what the user can see (Dylan)
- Fix a typo in a comment, added in this release (me)
- Don't allow wrapping while adding provided buffers (me)
- Fix a double poll race, and add a lockdep assertion for it too
(Pavel)"
* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
io_uring/poll: lockdep annote io_poll_req_insert_locked
io_uring/poll: fix double poll req->flags races
io_uring: check for rollover of buffer ID when providing buffers
io_uring: calculate CQEs from the user visible value
io_uring: fix typo in io_uring.h comment
selftests/net: don't tests batched TCP io_uring zc
Linus Torvalds [Fri, 11 Nov 2022 19:49:20 +0000 (11:49 -0800)]
Merge tag 's390-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- fix memcpy warning about field-spanning write in zcrypt driver
- minor updates to defconfigs
- remove CONFIG_DEBUG_INFO_BTF from all defconfigs and add btf.config
addon config file. It significantly decreases compile time and allows
quickly enabling that option into the current kernel config
- add kasan.config addon config file which allows to easily enable
KASAN into the current kernel config
- binutils commit 906f69cf65da ("IBM zSystems: Issue error for *DBL
relocs on misaligned symbols") caused several link errors. Always
build relocatable kernel to avoid this problem
- raise the minimum clang version to 15.0.0 to avoid silent generation
of a corrupted code
* tag 's390-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390
s390: always build relocatable kernel
s390/configs: add kasan.config addon config file
s390/configs: move CONFIG_DEBUG_INFO_BTF into btf.config addon config
s390: update defconfigs
s390/zcrypt: fix warning about field-spanning write
Linus Torvalds [Fri, 11 Nov 2022 19:28:26 +0000 (11:28 -0800)]
Merge tag 'nfsd-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix an export leak
- Fix a potential tracepoint crash
* tag 'nfsd-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: put the export reference in nfsd4_verify_deleg_dentry
nfsd: fix use-after-free in nfsd_file_do_acquire tracepoint
Linus Torvalds [Fri, 11 Nov 2022 17:45:30 +0000 (09:45 -0800)]
Merge tag 'perf-tools-fixes-for-v6.1-2-2022-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf stat' crash with --per-node --metric-only in CSV mode, due
to the AGGR_NODE slot in the 'aggr_header_csv' array not being set.
- Fix printing prefix in CSV output of 'perf stat' metrics in interval
mode (-I), where an extra separator was being added to the start of
some lines.
- Fix skipping branch stack sampling 'perf test' entry, that was using
both --branch-any and --branch-filter, which can't be used together.
* tag 'perf-tools-fixes-for-v6.1-2-2022-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add the include/perf/ directory to .gitignore
perf test: Fix skipping branch stack sampling test
perf stat: Fix printing os->prefix in CSV metrics output
perf stat: Fix crash with --per-node --metric-only in CSV mode
Linus Torvalds [Fri, 11 Nov 2022 17:40:19 +0000 (09:40 -0800)]
Merge tag 'riscv-for-linus-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to add the missing PWM LEDs into the SiFive HiFive Unleashed
device tree.
- A fix to fully clear a task's registers on creation, as they end up
in userspace and thus leak kernel memory.
- A pair of VDSO-related build fixes that manifest on recent LLVM-based
toolchains.
- A fix to our early init to ensure the DT is adequately processed
before reserved memory nodes are processed.
* tag 'riscv-for-linus-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: vdso: Do not add missing symbols to version section in linker script
riscv: fix reserved memory setup
riscv: vdso: fix build with llvm
riscv: process: fix kernel info leakage
riscv: dts: sifive unleashed: Add PWM controlled LEDs
Linus Torvalds [Fri, 11 Nov 2022 17:32:57 +0000 (09:32 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm
"This is a pretty large diffstat for this time of the release. The main
culprit is a reorganization of the AMD assembly trampoline, allowing
percpu variables to be accessed early.
This is needed for the return stack depth tracking retbleed mitigation
that will be in 6.2, but it also makes it possible to tighten the IBRS
restore on vmexit. The latter change is a long tail of the
spectrev2/retbleed patches (the corresponding Intel change was simpler
and went in already last June), which is why I am including it right
now instead of sharing a topic branch with tip.
Being assembly and being rich in comments makes the line count balloon
a bit, but I am pretty confident in the change (famous last words)
because the reorganization actually makes everything simpler and more
understandable than before. It has also had external review and has
been tested on the aforementioned 6.2 changes, which explode quite
brutally without the fix.
Apart from this, things are pretty normal.
s390:
- PCI fix
- PV clock fix
x86:
- Fix clash between PMU MSRs and other MSRs
- Prepare SVM assembly trampoline for 6.2 retbleed mitigation and
for...
- ... tightening IBRS restore on vmexit, moving it before the first
RET or indirect branch
- Fix log level for VMSA dump
- Block all page faults during kvm_zap_gfn_range()
Tools:
- kvm_stat: fix incorrect detection of debugfs
- kvm_stat: update vmexit definitions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Block all page faults during kvm_zap_gfn_range()
KVM: x86/pmu: Limit the maximum number of supported AMD GP counters
KVM: x86/pmu: Limit the maximum number of supported Intel GP counters
KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet
KVM: SVM: Only dump VMSA to klog at KERN_DEBUG level
tools/kvm_stat: update exit reasons for vmx/svm/aarch64/userspace
tools/kvm_stat: fix incorrect detection of debugfs
x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callers
KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assembly
KVM: SVM: restore host save area from assembly
KVM: SVM: move guest vmsave/vmload back to assembly
KVM: SVM: do not allocate struct svm_cpu_data dynamically
KVM: SVM: remove dead field from struct svm_cpu_data
KVM: SVM: remove unused field from struct vcpu_svm
KVM: SVM: retrieve VMCB from assembly
KVM: SVM: adjust register allocation for __svm_vcpu_run()
KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svm
KVM: x86: use a separate asm-offsets.c file
KVM: s390: pci: Fix allocation size of aift kzdev elements
KVM: s390: pv: don't allow userspace to set the clock under PV
Linus Torvalds [Fri, 11 Nov 2022 17:24:03 +0000 (09:24 -0800)]
Merge tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix TSC MSR write for root partition (Anirudh Rayabharam)
- Fix definition of vector in pci-hyperv driver (Dexuan Cui)
- A few other misc patches
* tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Fix the definition of vector in hv_compose_msi_msg()
MAINTAINERS: remove sthemmin
x86/hyperv: fix invalid writes to MSRs during root partition kexec
clocksource/drivers/hyperv: add data structure for reference TSC MSR
Drivers: hv: fix repeated words in comments
x86/hyperv: Remove BUG_ON() for kmap_local_page()
Linus Torvalds [Fri, 11 Nov 2022 17:19:05 +0000 (09:19 -0800)]
Merge tag 'dmaengine-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Misc minor driver fixes and a big pile of at_hdmac driver fixes. More
work on this driver is done and sitting in next:
- Pile of at_hdmac driver rework which fixes many long standing
issues for this driver.
- couple of stm32 driver fixes for clearing structure and race fix
- idxd fixes for RO device state and batch size
- ti driver mem leak fix
- apple fix for grabbing channels in xlate
- resource leak fix in mv xor"
* tag 'dmaengine-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: at_hdmac: Check return code of dma_async_device_register
dmaengine: at_hdmac: Fix impossible condition
dmaengine: at_hdmac: Don't allow CPU to reorder channel enable
dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errors
dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardware
dmaengine: at_hdmac: Fix concurrency over the active list
dmaengine: at_hdmac: Free the memset buf without holding the chan lock
dmaengine: at_hdmac: Fix concurrency over descriptor
dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()
dmaengine: at_hdmac: Protect atchan->status with the channel lock
dmaengine: at_hdmac: Do not call the complete callback on device_terminate_all
dmaengine: at_hdmac: Fix premature completion of desc in issue_pending
dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_hdmac: Don't start transactions at tx_submit level
dmaengine: at_hdmac: Fix at_lli struct definition
dmaengine: stm32-dma: fix potential race between pause and resume
dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()
dmaengine: apple-admac: Fix grabbing of channels in of_xlate
dmaengine: idxd: fix RO device state error after been disabled/reset
...
Linus Torvalds [Fri, 11 Nov 2022 17:13:52 +0000 (09:13 -0800)]
Merge tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A relatively large batch of fixes here but all device specific, plus
an update to MAINTAINERS.
The summary print change to the STM32 driver is fixing an issue where
the driver could easily end up spamming the logs with something that
should be a debug message"
* tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amd: Fix SPI_SPD7 value
spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run
spi: meson-spicc: fix do_div build error on non-arm64
spi: intel: Use correct mask for flash and protected regions
spi: mediatek: Fix package division error
spi: tegra210-quad: Don't initialise DMA if not supported
MAINTAINERS: Update HiSilicon SFC Driver maintainer
spi: meson-spicc: move wait completion in driver to take bursts delay in account
spi: stm32: Print summary 'callbacks suppressed' message
Linus Torvalds [Fri, 11 Nov 2022 17:09:04 +0000 (09:09 -0800)]
Merge tag 'mmc-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Provide helper for resetting both SDHCI and CQHCI
- Fix reset for CQHCI (am654, brcmstb, esdhc-imx, of-arasan, tegra)
- Fixup support for MMC_CAP_8_BIT_DATA (esdhc-imx)
* tag 'mmc-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATA
mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCI
mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI
Linus Torvalds [Fri, 11 Nov 2022 17:03:19 +0000 (09:03 -0800)]
Merge tag 'for-linus-2022111101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for memory leak (on error path) in Hyper-V driver (Yang
Yingliang)
- regression fix for handling 3rd barrel switch emulation in Wacom
driver (Jason Gerecke)
* tag 'for-linus-2022111101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Fix logic used for 3rd barrel switch emulation
HID: hyperv: fix possible memory leak in mousevsc_probe()
HID: asus: Remove unused variable in asus_report_tool_width()
The idea behind io_poll_double_prepare() is to serialise with the
first poll entry by taking the wq lock. However, it's not safe to assume
that io_poll_wake() is not running when we can't grab the lock and so we
may race modifying req->flags.
Skip double poll setup if that happens. It's ok because the first poll
entry will only be removed when it's definitely completing, e.g.
pollfree or oneshot with a valid mask.
Linus Torvalds [Fri, 11 Nov 2022 16:58:43 +0000 (08:58 -0800)]
Merge tag 'sound-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things look calming down, as this contains only a few small fixes:
- Fix for a corner-case bug with SG-buffer page allocation helper
- A regression fix for Roland USB-audio device probe
- A potential memory leak fix at the error path
- Handful quirks and device-specific fixes for HD- and USB-audio"
* tag 'sound-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: fix potential memleak in 'add_widget_node'
ALSA: memalloc: Don't fall back for SG-buffer with IOMMU
ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue
ALSA: hda/realtek: Add Positivo C6300 model quirk
ALSA: usb-audio: Add DSD support for Accuphase DAC-60
ALSA: usb-audio: Add quirk entry for M-Audio Micro
ALSA: hda/hdmi - enable runtime pm for more AMD display audio
ALSA: usb-audio: Remove redundant workaround for Roland quirk
ALSA: usb-audio: Yet more regression for for the delayed card registration
ALSA: hda/ca0132: add quirk for EVGA Z390 DARK
ALSA: hda: clarify comments on SCF changes
ALSA: arm: pxa: pxa2xx-ac97-lib: fix return value check of platform_get_irq()
ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41
Linus Torvalds [Fri, 11 Nov 2022 16:50:36 +0000 (08:50 -0800)]
Merge tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Weekly pull request for graphics, mostly amdgpu and i915, with a
couple of fixes for vc4 and panfrost, panel quirks and a kconfig
change for rcar-du. Nothing seems to be too strange at this stage.
amdgpu:
- Fix s/r in amdgpu_vram_mgr_new
- SMU 13.0.4 update
- GPUVM TLB race fix
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- Vega10 fan fix
- BACO fix for Beige Goby board
- PSR fix
- GPU VM PT locking fixes
amdkfd:
- CRIU fixes
vc4:
- HDMI fixes to vc4.
panfrost:
- Make panfrost's uapi header compile with C++.
- Handle 1 gb boundary correctly in panfrost mmu code.
panel:
- Add rotation quirks for 2 panels.
rcar-du:
- DSI Kconfig fix
i915:
- Fix sg_table handling in map_dma_buf
- Send PSR update also on invalidate
- Do not set cache_dirty for DGFX
- Restore userptr probe_range behaviour"
* tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amd/display: only fill dirty rectangles when PSR is enabled
drm/amdgpu: disable BACO on special BEIGE_GOBY card
drm/amdgpu: Drop eviction lock when allocating PT BO
drm/amdgpu: Unlock bo_list_mutex after error handling
Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""
drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
drm/amd/display: Fix gpio port mapping issue
drm/amd/display: Fix reg timeout in enc314_enable_fifo
drm/amd/display: Fix FCLK deviation and tool compile issues
drm/amd/display: Zeromem mypipe heap struct before using it
drm/amd/display: Update SR watermarks for DCN314
drm/amdgpu: workaround for TLB seq race
drm/amdkfd: Fix error handling in criu_checkpoint
drm/amdkfd: Fix error handling in kfd_criu_restore_events
drm/amd/pm: update SMU IP v13.0.4 msg interface header
drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSI
drm/panfrost: Split io-pgtable requests properly
drm/amdgpu: Fix the lpfn checking condition in drm buddy
drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
drm: panel-orientation-quirks: Add quirk for Nanote UMPC-01
...
get_port_from_cmdline() returns an int, yet is assigned to a char, which
is wrong in its own right, but also, with char becoming unsigned, this
poses problems, because -1 is used as an error value. Further
complicating things, fw_init_early_console() is only ever called with a
-1 argument. Fix this up by removing the unused argument from
fw_init_early_console() and treating port as a proper signed integer.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Jiaxun Yang [Thu, 3 Nov 2022 15:10:53 +0000 (15:10 +0000)]
MIPS: jump_label: Fix compat branch range check
Cast upper bound of branch range to long to do signed compare,
avoid negative offset trigger this warning.
Fixes: 9b6584e35f40 ("MIPS: jump_label: Use compact branches for >= r6") Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: stable@vger.kernel.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Linus Walleij [Thu, 3 Nov 2022 10:15:35 +0000 (11:15 +0100)]
mips: alchemy: gpio: Include the right header
The local GPIO driver in the MIPS Alchemy is including the legacy
<linux/gpio.h> header but what it wants is to implement a GPIO
driver so include <linux/gpio/driver.h> instead.
Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: linux-gpio@vger.kernel.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Rongwei Zhang [Wed, 2 Nov 2022 12:27:39 +0000 (20:27 +0800)]
MIPS: fix duplicate definitions for exported symbols
Building with clang-14 fails with:
AS arch/mips/kernel/relocate_kernel.o
<unknown>:0: error: symbol 'kexec_args' is already defined
<unknown>:0: error: symbol 'secondary_kexec_args' is already defined
<unknown>:0: error: symbol 'kexec_start_address' is already defined
<unknown>:0: error: symbol 'kexec_indirection_page' is already defined
<unknown>:0: error: symbol 'relocate_new_kernel_size' is already defined
It turns out EXPORT defined in asm/asm.h expands to a symbol definition,
so there is no need to define these symbols again. Remove duplicated
symbol definitions.
John Thomson [Mon, 31 Oct 2022 17:07:49 +0000 (03:07 +1000)]
mips: boot/compressed: use __NO_FORTIFY
In the mips CONFIG_SYS_SUPPORTS_ZBOOT kernel, fix the compile error
when using CONFIG_FORTIFY_SOURCE=y
LD vmlinuz
mipsel-openwrt-linux-musl-ld: arch/mips/boot/compressed/decompress.o: in
function `decompress_kernel':
./include/linux/decompress/mm.h:(.text.decompress_kernel+0x177c):
undefined reference to `warn_slowpath_fmt'
KVM: x86/mmu: Block all page faults during kvm_zap_gfn_range()
When zapping a GFN range, pass 0 => ALL_ONES for the to-be-invalidated
range to effectively block all page faults while the zap is in-progress.
The invalidation helpers take a host virtual address, whereas zapping a
GFN obviously provides a guest physical address and with the wrong unit
of measurement (frame vs. byte).
Alternatively, KVM could walk all memslots to get the associated HVAs,
but thanks to SMM, that would require multiple lookups. And practically
speaking, kvm_zap_gfn_range() usage is quite rare and not a hot path,
e.g. MTRR and CR0.CD are almost guaranteed to be done only on vCPU0
during boot, and APICv inhibits are similarly infrequent operations.
Fixes: edb298c663fc ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range") Reported-by: Chao Peng <chao.p.peng@linux.intel.com> Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221111001841.2412598-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yang Yingliang [Tue, 8 Nov 2022 13:40:04 +0000 (21:40 +0800)]
ata: libata-transport: fix error handling in ata_tdev_add()
In ata_tdev_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x3a0
lr : device_del+0x44/0x3a0
Call trace:
device_del+0x48/0x3a0
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tdev_delete+0x24/0x50 [libata]
ata_tlink_delete+0x40/0xa0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tdev_add(). In the error path, device_del() is called to delete
the device which was added earlier in this function, and ata_tdev_free()
is called to free ata_dev.
Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Yang Yingliang [Tue, 8 Nov 2022 13:40:03 +0000 (21:40 +0800)]
ata: libata-transport: fix error handling in ata_tlink_add()
In ata_tlink_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tlink_delete+0x88/0xb0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tlink_add().
Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Yang Yingliang [Tue, 8 Nov 2022 13:40:02 +0000 (21:40 +0800)]
ata: libata-transport: fix error handling in ata_tport_add()
In ata_tport_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tport_delete+0x34/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tport_add().
Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Yang Yingliang [Tue, 8 Nov 2022 13:40:01 +0000 (21:40 +0800)]
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
In the error path in ata_tport_add(), when calling put_device(),
ata_tport_release() is called, it will put the refcount of 'ap->host'.
And then ata_host_put() is called again, the refcount is decreased
to 0, ata_host_release() is called, all ports are freed and set to
null.
When unbinding the device after failure, ata_host_stop() is called
to release the resources, it leads a null-ptr-deref(), because all
the ports all freed and null.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ata_host_stop+0x3c/0x84 [libata]
lr : release_nodes+0x64/0xd0
Call trace:
ata_host_stop+0x3c/0x84 [libata]
release_nodes+0x64/0xd0
devres_release_all+0xbc/0x1b0
device_unbind_cleanup+0x20/0x70
really_probe+0x158/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__driver_attach+0xb4/0x220
bus_for_each_dev+0x78/0xdc
driver_attach+0x2c/0x40
bus_add_driver+0x184/0x240
driver_register+0x80/0x13c
__pci_register_driver+0x4c/0x60
ahci_pci_driver_init+0x30/0x1000 [ahci]
Fix this by removing redundant ata_host_put() in the error path.
Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Linus Torvalds [Fri, 11 Nov 2022 01:31:15 +0000 (17:31 -0800)]
Merge tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
Jakub Kicinski [Fri, 11 Nov 2022 00:29:56 +0000 (16:29 -0800)]
Merge tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-02
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
net/mlx5e: Fix tc acts array not to be dependent on enum order
net/mlx5e: Fix usage of DMA sync API
net/mlx5e: Add missing sanity checks for max TX WQE size
net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
net/mlx5: Allow async trigger completion execution on single CPU systems
net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================
Dave Airlie [Fri, 11 Nov 2022 00:20:11 +0000 (10:20 +1000)]
Merge tag 'drm-intel-fixes-2022-11-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix sg_table handling in map_dma_buf (Matthew Auld)
- Send PSR update also on invalidate (Jouni Högander)
- Do not set cache_dirty for DGFX (Niranjana Vishwanathapura)
- Restore userptr probe_range behaviour (Matthew Auld)
RISC-V: vdso: Do not add missing symbols to version section in linker script
Recently, ld.lld moved from '--undefined-version' to
'--no-undefined-version' as the default, which breaks the compat vDSO
build:
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_gettimeofday' failed: symbol not defined
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_gettime' failed: symbol not defined
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_getres' failed: symbol not defined
These symbols are not present in the compat vDSO or the regular vDSO for
32-bit but they are unconditionally included in the version section of
the linker script, which is prohibited with '--no-undefined-version'.
Fix this issue by only including the symbols that are actually exported
in the version section of the linker script.
Conor Dooley [Mon, 7 Nov 2022 15:15:25 +0000 (15:15 +0000)]
riscv: fix reserved memory setup
Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params.
Ard Biesheuvel [Sun, 6 Nov 2022 14:53:54 +0000 (15:53 +0100)]
arm64: efi: Fix handling of misaligned runtime regions and drop warning
Currently, when mapping the EFI runtime regions in the EFI page tables,
we complain about misaligned regions in a rather noisy way, using
WARN().
Not only does this produce a lot of irrelevant clutter in the log, it is
factually incorrect, as misaligned runtime regions are actually allowed
by the EFI spec as long as they don't require conflicting memory types
within the same 64k page.
So let's drop the warning, and tweak the code so that we
- take both the start and end of the region into account when checking
for misalignment
- only revert to RWX mappings for non-code regions if misaligned code
regions are also known to exist.
Ard Biesheuvel [Thu, 10 Nov 2022 09:36:20 +0000 (10:36 +0100)]
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
Ampere Altra machines are reported to misbehave when the SetTime() EFI
runtime service is called after ExitBootServices() but before calling
SetVirtualAddressMap(). Given that the latter is horrid, pointless and
explicitly documented as optional by the EFI spec, we no longer invoke
it at boot if the configured size of the VA space guarantees that the
EFI runtime memory regions can remain mapped 1:1 like they are at boot
time.
On Ampere Altra machines, this results in SetTime() calls issued by the
rtc-efi driver triggering synchronous exceptions during boot. We can
now recover from those without bringing down the system entirely, due to
commit 23715a26c8d81291 ("arm64: efi: Recover from synchronous
exceptions occurring in firmware"). However, it would be better to avoid
the issue entirely, given that the firmware appears to remain in a funny
state after this.
So attempt to identify these machines based on the 'family' field in the
type #1 SMBIOS record, and call SetVirtualAddressMap() unconditionally
in that case.
Tested-by: Alexandru Elisei <alexandru.elisei@gmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Jisheng Zhang [Mon, 31 Oct 2022 18:29:43 +0000 (02:29 +0800)]
riscv: vdso: fix build with llvm
Even after commit 89fd4a1df829 ("riscv: jump_label: mark arguments as
const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE
+ LLVM=1 can reproduce below build error:
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:5:
In file included from include/vdso/datapage.h:17:
In file included from include/vdso/processor.h:10:
In file included from arch/riscv/include/asm/vdso/processor.h:7:
In file included from include/linux/jump_label.h:112:
arch/riscv/include/asm/jump_label.h:42:3: error:
invalid operand for inline asm constraint 'i'
" .option push \n\t"
^
1 error generated.
I think the problem is when "-Os" is passed as CFLAGS, it's removed by
"CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is
introduced in commit e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday
broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c
arm64 does remove "-Os" as well, but it forces "-O2" after removing
"-Os".
I compared the generated vgettimeofday.o with "-O2" and "-Os",
I think no big performance difference. So let's tell the kbuild not
to remove "-Os" rather than follow arm64 style.
vdso related performance can be improved a lot when building kernel with
CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization)
Jisheng Zhang [Sat, 29 Oct 2022 11:34:50 +0000 (19:34 +0800)]
riscv: process: fix kernel info leakage
thread_struct's s[12] may contain random kernel memory content, which
may be finally leaked to userspace. This is a security hole. Fix it
by clearing the s[12] array in thread_struct when fork.
As for kthread case, it's better to clear the s[12] array as well.
Anthony DeRossi [Thu, 10 Nov 2022 01:40:27 +0000 (17:40 -0800)]
vfio/pci: Check the device set open count on reset
vfio_pci_dev_set_needs_reset() inspects the open_count of every device
in the set to determine whether a reset is allowed. The current device
always has open_count == 1 within vfio_pci_core_disable(), effectively
disabling the reset logic. This field is also documented as private in
vfio_device, so it should not be used to determine whether other devices
in the set are open.
Checking for vfio_device_set_open_count() > 1 on the device set fixes
both issues.
After commit 2cd8b14aaa66 ("vfio/pci: Move to the device set
infrastructure"), failure to create a new file for a device would cause
the reset to be skipped due to open_count being decremented after
calling close_device() in the error path.
After commit eadd86f835c6 ("vfio: Remove calls to
vfio_group_add_container_user()"), releasing a device would always skip
the reset due to an ordering change in vfio_device_fops_release().
Failing to reset the device leaves it in an unknown state, potentially
causing errors when it is accessed later or bound to a different driver.
This issue was observed with a Radeon RX Vega 56 [1002:687f] (rev c3)
assigned to a Windows guest. After shutting down the guest, unbinding
the device from vfio-pci, and binding the device to amdgpu:
Fixes: 2cd8b14aaa66 ("vfio/pci: Move to the device set infrastructure") Fixes: eadd86f835c6 ("vfio: Remove calls to vfio_group_add_container_user()") Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20221110014027.28780-4-ajderossi@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Anthony DeRossi [Thu, 10 Nov 2022 01:40:26 +0000 (17:40 -0800)]
vfio: Export the device set open count
The open count of a device set is the sum of the open counts of all
devices in the set. Drivers can use this value to determine whether
shared resources are in use without tracking them manually or accessing
the private open_count in vfio_device.
Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20221110014027.28780-3-ajderossi@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Anthony DeRossi [Thu, 10 Nov 2022 01:40:25 +0000 (17:40 -0800)]
vfio: Fix container device registration life cycle
In vfio_device_open(), vfio_device_container_register() is always called
when open_count == 1. On error, vfio_device_container_unregister() is
only called when open_count == 1 and close_device is set. This leaks a
registration for devices without a close_device implementation.
In vfio_device_fops_release(), vfio_device_container_unregister() is
called unconditionally. This can cause a device to be unregistered
multiple times.
Treating container device registration/unregistration uniformly (always
when open_count == 1) fixes both issues.
Fixes: ce4b4657ff18 ("vfio: Replace the DMA unmapping notifier with a callback") Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20221110014027.28780-2-ajderossi@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Jens Axboe [Thu, 10 Nov 2022 17:50:55 +0000 (10:50 -0700)]
io_uring: check for rollover of buffer ID when providing buffers
We already check if the chosen starting offset for the buffer IDs fit
within an unsigned short, as 65535 is the maximum value for a provided
buffer. But if the caller asks to add N buffers at offset M, and M + N
would exceed the size of the unsigned short, we simply add buffers with
wrapping around the ID.
This is not necessarily a bug and could in fact be a valid use case, but
it seems confusing and inconsistent with the initial check for starting
offset. Let's check for wrap consistently, and error the addition if we
do need to wrap.
Linus Torvalds [Thu, 10 Nov 2022 16:58:29 +0000 (08:58 -0800)]
Merge tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- revert memory optimization for scrub blocks, this misses errors in
2nd and following blocks
- add exception for ENOMEM as reason for transaction abort to not print
stack trace, syzbot has reported many
- zoned fixes:
- fix locking imbalance during scrub
- initialize zones for seeding device
- initialize zones for cloned device structures
- when looking up device, change assertion to a real check as some of
the search parameters can be passed by ioctl, reported by syzbot
- fix error pointer check in self tests
* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix locking imbalance on scrub
btrfs: zoned: initialize device's zone info for seeding
btrfs: zoned: clone zoned device info when cloning a device
Revert "btrfs: scrub: use larger block size for data extent scrub"
btrfs: don't print stack trace when transaction is aborted due to ENOMEM
btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
btrfs: fix match incorrectly in dev_args_match_device
Linus Torvalds [Thu, 10 Nov 2022 16:42:59 +0000 (08:42 -0800)]
Merge tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"Two qcom driver fixes for broadcast completion reinit and check for
outanding writes. And a lone Intel driver fix for clock stop timeout"
* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: check for outanding writes before doing a read
soundwire: qcom: reinit broadcast completion
soundwire: intel: Initialize clock stop timeout
Linus Torvalds [Thu, 10 Nov 2022 16:36:42 +0000 (08:36 -0800)]
Merge tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of odd driver fixes and a MAINTAINER email update:
- Update Kishon's email
- stms32 error code fix in driver probe
- tegra: fix for checking valid pointer
- qcom_qmp: null deref fix
- sunplus: error check fix
- ralink: add missing sentinel to table"
* tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ralink: mt7621-pci: add sentinel to quirks table
phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe
phy: qcom-qmp-combo: fix NULL-deref on runtime resume
phy: tegra: xusb: Fix crash during pad power on/down
phy: stm32: fix an error code in probe
MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK
Linus Torvalds [Thu, 10 Nov 2022 16:28:20 +0000 (08:28 -0800)]
Merge tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"I apparently had missed tagging and sending this set of changes out
during the 6.1 merge window. But did get the associated dts changes
depending on this merged. The result is a regression in 6.1-rc on the
affected, older, Qualcomm platforms - in for form of them not booting.
So while these weren't regression fixes originally, they are now. It's
not introducing new beahavior, but simply extending the existing new
Devicetree model, to cover remaining platforms:
- extend the DeviceTree binding and implementation for the Qualcomm
hardware spinlock on some older platforms to follow the style of
the newer ones where the DeviceTree representation does not rely on
an intermediate syscon node"
* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
hwspinlock: qcom: add support for MMIO on older SoCs
hwspinlock: qcom: correct MMIO max register for newer SoCs
dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs
In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.
Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.
Ye Bin [Thu, 10 Nov 2022 14:45:39 +0000 (22:45 +0800)]
ALSA: hda: fix potential memleak in 'add_widget_node'
As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources.
Jens Axboe [Thu, 10 Nov 2022 13:55:02 +0000 (06:55 -0700)]
Merge tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme into block-6.1
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- quiet user passthrough command errors (Keith Busch)
- fix memory leak in nvmet_subsys_attr_model_store_locked
- fix a memory leak in nvmet-auth (Sagi Grimberg)"
* tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme:
nvmet: fix a memory leak
nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked
nvme: quiet user passthrough command errors
Takashi Iwai [Thu, 10 Nov 2022 13:22:16 +0000 (14:22 +0100)]
ALSA: memalloc: Don't fall back for SG-buffer with IOMMU
When the non-contiguous page allocation for SG buffer allocation
fails, the memalloc helper tries to fall back to the old page
allocation methods. This would, however, result in the bogus page
addresses when IOMMU is enabled. Usually in such a case, the fallback
allocation should fail as well, but occasionally it succeeds and
hitting a bad access.
The fallback was thought for non-IOMMU case, and as the error from
dma_alloc_noncontiguous() with IOMMU essentially implies a fatal
memory allocation error, we should return the error straightforwardly
without fallback. This avoids the corner case like the above.
The patch also renames the local variable "dma_ops" with snd_ prefix
for avoiding the name conflict.
Zhengchao Shao [Wed, 9 Nov 2022 02:54:32 +0000 (10:54 +0800)]
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
When failed to init rxq or txq in mv643xx_eth_open() for opening device,
napi isn't disabled. When open mv643xx_eth device next time, it will
trigger a BUG_ON() in napi_enable(). Compile tested only.
Zhengchao Shao [Wed, 9 Nov 2022 02:37:41 +0000 (10:37 +0800)]
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.
====================
macsec: clear encryption keys in h/w drivers
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading but some h/w drivers did a copy of the key
which need to be zeroed as well.
The MSCC PHY driver can actually be converted not to copy the encryption
key at all, but such patch would be quite difficult to backport. I'll
send a following up patch doing this in net-next once this series lands.
Tested on the MSCC PHY but not on the atlantic NIC.
====================
Antoine Tenart [Tue, 8 Nov 2022 15:34:59 +0000 (16:34 +0100)]
net: atlantic: macsec: clear encryption keys from the stack
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.
[4 Fixes tags below, all part of the same series, no need to split this]
Antoine Tenart [Tue, 8 Nov 2022 15:34:58 +0000 (16:34 +0100)]
net: phy: mscc: macsec: clear encryption keys when freeing a flow
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.
Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
stmmac: dwmac-loongson: fixes three leaks
patch #2 fixes missing pci_disable_device() in the error path in probe()
patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in
error and remove() path.
====================
Yang Yingliang [Tue, 8 Nov 2022 11:46:47 +0000 (19:46 +0800)]
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().
Fixes: 2ae34111fe4e ("stmmac: dwmac-loongson: fix invalid mdio_node") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yang Yingliang [Tue, 8 Nov 2022 11:46:46 +0000 (19:46 +0800)]
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
Add missing pci_disable_device() in the error path in loongson_dwmac_probe().
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yang Yingliang [Tue, 8 Nov 2022 11:46:45 +0000 (19:46 +0800)]
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ai Chao [Thu, 10 Nov 2022 06:34:52 +0000 (14:34 +0800)]
ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue
For Hamedal C20, the current rate is different from the runtime rate,
snd_usb_endpoint stop and close endpoint to resetting rate.
if snd_usb_endpoint close the endpoint, sometimes usb will
disconnect the device.
Zhengchao Shao [Wed, 9 Nov 2022 01:21:00 +0000 (09:21 +0800)]
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied
during adapter goes up are not cleared. Fix it. Only be compiled, not be
tested.
Tan, Tee Min [Tue, 8 Nov 2022 02:08:11 +0000 (21:08 -0500)]
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
Current Intel platform has an output of ~976ms interval
when probed on 1 Pulse-per-Second(PPS) hardware pin.
The correct PTP clock frequency for PCH GbE should be 204.8MHz
instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz.
Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform") Signed-off-by: Ling Pei Lee <pei.lee.ling@intel.com> Signed-off-by: Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com> Link: https://lore.kernel.org/r/20221108020811.12919-1-yi.fang.gan@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao [Wed, 9 Nov 2022 02:14:51 +0000 (10:14 +0800)]
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
When failed to bind qsets in cxgb_up() for opening device, napi isn't
disabled. When open cxgb3 device next time, it will trigger a BUG_ON()
in napi_enable(). Compile tested only.
Zhengchao Shao [Wed, 9 Nov 2022 01:15:37 +0000 (09:15 +0800)]
net: cpsw: disable napi in cpsw_ndo_open()
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for
opening device, napi isn't disabled. When open cpsw device next time, it
will report a invalid opcode issue. Compiled tested only.
Jingbo Xu [Fri, 21 Oct 2022 02:31:53 +0000 (10:31 +0800)]
erofs: fix use-after-free of fsid and domain_id string
When erofs instance is remounted with fsid or domain_id mount option
specified, the original fsid and domain_id string pointer in sbi->opt
is directly overridden with the fsid and domain_id string in the new
fs_context, without freeing the original fsid and domain_id string.
What's worse, when the new fsid and domain_id string is transferred to
sbi, they are not reset to NULL in fs_context, and thus they are freed
when remount finishes, while sbi is still referring to these strings.
Reconfiguration for fsid and domain_id seems unusual. Thus clarify this
restriction explicitly and dump a warning when users are attempting to
do this.
Besides, to fix the use-after-free issue, move fsid and domain_id from
erofs_mount_opts to outside.
Hamza Mahfooz [Wed, 9 Nov 2022 17:06:27 +0000 (12:06 -0500)]
drm/amd/display: only fill dirty rectangles when PSR is enabled
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't
supported by the relevant link in amdgpu_dm_commit_planes(), this is
undesirable especially because when drm.debug is enabled we are printing
messages in fill_dc_dirty_rects() that are only useful for debugging PSR
(and confusing otherwise). So, we can instead limit the filling of dirty
rectangles to only when PSR is enabled.
Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 2 Nov 2022 20:55:31 +0000 (16:55 -0400)]
drm/amdgpu: Drop eviction lock when allocating PT BO
Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.
Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Thu, 3 Nov 2022 14:24:52 +0000 (10:24 -0400)]
drm/amdgpu: Unlock bo_list_mutex after error handling
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.
If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.
Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.
WARNING: kfdtest/2930 still has locks held!
1 lock held by kfdtest/2930:
(&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
stack backtrace:
dump_stack_lvl+0x44/0x57
get_signal+0x79f/0xd00
arch_do_signal_or_restart+0x36/0x7b0
exit_to_user_mode_prepare+0xfd/0x1b0
syscall_exit_to_user_mode+0x19/0x40
do_syscall_64+0x40/0x80
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Thu, 27 Oct 2022 20:22:26 +0000 (16:22 -0400)]
drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
[WHY?]
Data return times when using lowest memclk can be <= 60us, which can cause
underflow on high bandwidth displays with a workload.
[HOW?]
Enforce a minimum prefetch time during validation for low memclk modes.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steve Su [Thu, 27 Oct 2022 21:52:32 +0000 (05:52 +0800)]
drm/amd/display: Fix gpio port mapping issue
[Why]
1. Port of gpio has different mapping.
[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Steve Su <steve.su@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix reg timeout in enc314_enable_fifo
[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.
This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.
This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.
[How]
Don't wait for the symclk to be on here because firmware already does.
Don't wait for reset if we know the symclk isn't on.
Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.
Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
Chaitanya Dhere [Thu, 27 Oct 2022 13:51:19 +0000 (09:51 -0400)]
drm/amd/display: Fix FCLK deviation and tool compile issues
[Why]
Recent backports from open source do not have header inclusion pattern
that is consistent with inclusion style in the rest of the file. This
breaks the internal tool builds as well. A recent commit erronously
modified the original DML formula for calculating
ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation
from the golden values.
[How]
Change the way in which display_mode_vba.h is included so that it is
consistent with the inclusion style in rest of the file which also fixes
the tool build. Restore the DML formula to its original state to fix the
FCLK deviation.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Thu, 20 Oct 2022 21:26:24 +0000 (17:26 -0400)]
drm/amd/display: Zeromem mypipe heap struct before using it
[Why&How]
Bug was caused when moving variable from stack to heap because it was reusable
and garbage was left over, so we need to zero mem.
Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
New values requested by hardware after fine-tuning.
Update for all memory types.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
projects / kernel.git / log