The most common case is that vcpu->arch.dr6 and the host's %dr6 value
are not related at all because ->switch_db_regs is zero. To do this
all correctly, we must handle the case where the guest leaves an arbitrary
unused value in vcpu->arch.dr6 before disabling breakpoints again.
However, this means that vcpu->arch.dr6 is not suitable to detect the
need for a %dr6 clear.
Paolo Bonzini [Sun, 21 Oct 2018 09:47:01 +0000 (11:47 +0200)]
Merge tag 'kvm-ppc-next-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
Second PPC KVM update for 4.20.
Two commits; one is an optimization for PCI pass-through, and the
other disables nested HV-KVM on early POWER9 chips that need a
particular hardware bug workaround.
KVM: PPC: Optimize clearing TCEs for sparse tables
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses. These tables are radix trees,
we allocate indirect levels when they are written to. Since
the memory allocation is problematic in real mode, we have 2 accessors
to the entries:
- for virtual mode: it allocates the memory and it is always expected
to return non-NULL;
- fr real mode: it does not allocate and can return NULL.
Also, DMA windows can span to up to 55 bits of the address space and since
we never have this much RAM, such windows are sparse. However currently
the SPAPR TCE IOMMU driver walks through all TCEs to unpin DMA memory.
Since we maintain a userspace addresses table for VFIO which is a mirror
of the hardware table, we can use it to know which parts of the DMA
window have not been mapped and skip these so does this patch.
The bare metal systems do not have this problem as they use a bypass mode
of a PHB which maps RAM directly.
This helps a lot with sparse DMA windows, reducing the shutdown time from
about 3 minutes per 1 billion TCEs to a few seconds for 32GB sparse guest.
Just skipping the last level seems to be good enough.
As non-allocating accessor is used now in virtual mode as well, rename it
from IOMMU_TABLE_USERSPACE_ENTRY_RM (real mode) to _RO (read only).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Vitaly Kuznetsov [Fri, 19 Oct 2018 14:16:03 +0000 (16:16 +0200)]
x86/kvm/nVMX: tweak shadow fields
It seems we have some leftovers from times when 'unrestricted guest'
wasn't exposed to L1. Stop shadowing GUEST_CS_{BASE,LIMIT,AR_SELECTOR}
and GUEST_ES_BASE, shadow GUEST_SS_AR_BYTES as it was found that some
hypervisors (e.g. Hyper-V without Enlightened VMCS) access it pretty
often.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Christoffer Dall [Wed, 17 Oct 2018 18:21:16 +0000 (20:21 +0200)]
KVM: arm64: Safety check PSTATE when entering guest and handle IL
This commit adds a paranoid check when entering the guest to make sure
we don't attempt running guest code in an equally or more privilged mode
than the hypervisor. We also catch other accidental programming of the
SPSR_EL2 which results in an illegal exception return and report this
safely back to the user.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Paul Mackerras [Fri, 19 Oct 2018 09:44:04 +0000 (20:44 +1100)]
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
This disables the use of the streamlined entry path for radix guests
on early POWER9 chips that need the workaround added in commit 43169b00ddde ("powerpc/mm/radix: Workaround prefetch issue with KVM",
2017-07-24), because the streamlined entry path does not include
that workaround. This also means that we can't do nested HV-KVM
on those chips.
Since the chips that need that workaround are the same ones that can't
run both radix and HPT guests at the same time on different threads of
a core, we use the existing 'no_mixing_hpt_and_radix' variable that
identifies those chips to identify when we can't use the new guest
entry path, and when we can't do nested virtualization.
Dongjiu Geng [Fri, 12 Oct 2018 16:12:49 +0000 (00:12 +0800)]
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
The commit 30ed509801aa ("KVM: arm64: Share the parts of
get/set events useful to 32bit") shares the get/set events
helper for arm64 and arm32, but forgot to share the cap
extension code.
User space will check whether KVM supports vcpu events by
checking the KVM_CAP_VCPU_EVENTS extension
Acked-by: James Morse <james.morse@arm.com>
Reviewed-by : Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Mark Rutland [Wed, 17 Oct 2018 16:42:10 +0000 (17:42 +0100)]
KVM: arm64: Fix caching of host MDCR_EL2 value
At boot time, KVM stashes the host MDCR_EL2 value, but only does this
when the kernel is not running in hyp mode (i.e. is non-VHE). In these
cases, the stashed value of MDCR_EL2.HPMN happens to be zero, which can
lead to CONSTRAINED UNPREDICTABLE behaviour.
Since we use this value to derive the MDCR_EL2 value when switching
to/from a guest, after a guest have been run, the performance counters
do not behave as expected. This has been observed to result in accesses
via PMXEVTYPER_EL0 and PMXEVCNTR_EL0 not affecting the relevant
counters, resulting in events not being counted. In these cases, only
the fixed-purpose cycle counter appears to work as expected.
Fix this by always stashing the host MDCR_EL2 value, regardless of VHE.
Cc: Christopher Dall <christoffer.dall@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Fixes: a5ce7c0e4aa16900 ("arm64: KVM: Skip HYP setup when already running in HYP") Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Paolo Bonzini [Tue, 16 Oct 2018 22:55:22 +0000 (00:55 +0200)]
KVM: VMX: enable nested virtualization by default
With live migration support and finally a good solution for exception
event injection, nested VMX should be ready for having a stable userspace
ABI. The results of syzkaller fuzzing are not perfect but not horrible
either (and might be partially due to running on GCE, so that effectively
we're testing three-level nesting on a fork of upstream KVM!). Enabling
it by default seems like a nice way to conclude the 4.20 pull request. :)
Unfortunately, enabling nested SVM in 2009 (commit 73623f728cc) was a
bit premature. However, until live migration support is in place we can
reasonably expect that it does not offer much in terms of ABI guarantees.
Therefore we are still in time to break things and conform as much as
possible to the interface used for VMX.
Suggested-by: Jim Mattson <jmattson@google.com> Suggested-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Celebrated-by: Liran Alon <liran.alon@oracle.com> Celebrated-by: Wanpeng Li <kernellwp@gmail.com> Celebrated-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 16 Oct 2018 21:29:24 +0000 (14:29 -0700)]
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
This is a per-VM capability which can be enabled by userspace so that
the faulting linear address will be included with the information
about a pending #PF in L2, and the "new DR6 bits" will be included
with the information about a pending #DB in L2. With this capability
enabled, the L1 hypervisor can now intercept #PF before CR2 is
modified. Under VMX, the L1 hypervisor can now intercept #DB before
DR6 and DR7 are modified.
When userspace has enabled KVM_CAP_EXCEPTION_PAYLOAD, it should
generally provide an appropriate payload when injecting a #PF or #DB
exception via KVM_SET_VCPU_EVENTS. However, to support restoring old
checkpoints, this payload is not required.
Note that bit 16 of the "new DR6 bits" is set to indicate that a debug
exception (#DB) or a breakpoint exception (#BP) occurred inside an RTM
region while advanced debugging of RTM transactional regions was
enabled. This is the reverse of DR6.RTM, which is cleared in this
scenario.
This capability also enables exception.pending in struct
kvm_vcpu_events, which allows userspace to distinguish between pending
and injected exceptions.
Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 16 Oct 2018 21:29:23 +0000 (14:29 -0700)]
kvm: vmx: Defer setting of DR6 until #DB delivery
When exception payloads are enabled by userspace (which is not yet
possible) and a #DB is raised in L2, defer the setting of DR6 until
later. Under VMX, this allows the L1 hypervisor to intercept the fault
before DR6 is modified. Under SVM, DR6 is modified before L1 can
intercept the fault (as has always been the case with DR7).
Note that the payload associated with a #DB exception includes only
the "new DR6 bits." When the payload is delievered, DR6.B0-B3 will be
cleared and DR6.RTM will be set prior to merging in the new DR6 bits.
Also note that bit 16 in the "new DR6 bits" is set to indicate that a
debug exception (#DB) or a breakpoint exception (#BP) occurred inside
an RTM region while advanced debugging of RTM transactional regions
was enabled. Though the reverse of DR6.RTM, this makes the #DB payload
field compatible with both the pending debug exceptions field under
VMX and the exit qualification for #DB exceptions under VMX.
Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 16 Oct 2018 21:29:22 +0000 (14:29 -0700)]
kvm: x86: Defer setting of CR2 until #PF delivery
When exception payloads are enabled by userspace (which is not yet
possible) and a #PF is raised in L2, defer the setting of CR2 until
the #PF is delivered. This allows the L1 hypervisor to intercept the
fault before CR2 is modified.
For backwards compatibility, when exception payloads are not enabled
by userspace, kvm_multiple_exception modifies CR2 when the #PF
exception is raised.
Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 16 Oct 2018 21:29:21 +0000 (14:29 -0700)]
kvm: x86: Add payload operands to kvm_multiple_exception
kvm_multiple_exception now takes two additional operands: has_payload
and payload, so that updates to CR2 (and DR6 under VMX) can be delayed
until the exception is delivered. This is necessary to properly
emulate VMX or SVM hardware behavior for nested virtualization.
The new behavior is triggered by
vcpu->kvm->arch.exception_payload_enabled, which will (later) be set
by a new per-VM capability, KVM_CAP_EXCEPTION_PAYLOAD.
Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 16 Oct 2018 21:29:20 +0000 (14:29 -0700)]
kvm: x86: Add exception payload fields to kvm_vcpu_events
The per-VM capability KVM_CAP_EXCEPTION_PAYLOAD (to be introduced in a
later commit) adds the following fields to struct kvm_vcpu_events:
exception_has_payload, exception_payload, and exception.pending.
With this capability set, all of the details of vcpu->arch.exception,
including the payload for a pending exception, are reported to
userspace in response to KVM_GET_VCPU_EVENTS.
With this capability clear, the original ABI is preserved, and the
exception.injected field is set for either pending or injected
exceptions.
When userspace calls KVM_SET_VCPU_EVENTS with
KVM_CAP_EXCEPTION_PAYLOAD clear, exception.injected is no longer
translated to exception.pending. KVM_SET_VCPU_EVENTS can now only
establish a pending exception when KVM_CAP_EXCEPTION_PAYLOAD is set.
Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 16 Oct 2018 21:29:19 +0000 (14:29 -0700)]
kvm: x86: Add has_payload and payload to kvm_queued_exception
The payload associated with a #PF exception is the linear address of
the fault to be loaded into CR2 when the fault is delivered. The
payload associated with a #DB exception is a mask of the DR6 bits to
be set (or in the case of DR6.RTM, cleared) when the fault is
delivered. Add fields has_payload and payload to kvm_queued_exception
to track payloads for pending exceptions.
The new fields are introduced here, but for now, they are just cleared.
Reported-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 16 Oct 2018 16:50:09 +0000 (18:50 +0200)]
x86/kvm/nVMX: nested state migration for Enlightened VMCS
Add support for get/set of nested state when Enlightened VMCS is in use.
A new KVM_STATE_NESTED_EVMCS flag to indicate eVMCS on the vCPU was enabled
is added.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 16 Oct 2018 16:50:06 +0000 (18:50 +0200)]
x86/kvm/lapic: preserve gfn_to_hva_cache len on cache reinit
vcpu->arch.pv_eoi is accessible through both HV_X64_MSR_VP_ASSIST_PAGE and
MSR_KVM_PV_EOI_EN so on migration userspace may try to restore them in any
order. Values match, however, kvm_lapic_enable_pv_eoi() uses different
length: for Hyper-V case it's the whole struct hv_vp_assist_page, for KVM
native case it is 8. In case we restore KVM-native MSR last cache will
be reinitialized with len=8 so trying to access VP assist page beyond
8 bytes with kvm_read_guest_cached() will fail.
Check if we re-initializing cache for the same address and preserve length
in case it was greater.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 16 Oct 2018 16:50:05 +0000 (18:50 +0200)]
x86/kvm/hyperv: don't clear VP assist pages on init
VP assist pages may hold valuable data which needs to be preserved across
migration. Clean PV EOI portion of the data on init, the guest is
responsible for making sure there's no garbage in the rest.
This will be used for nVMX migration, eVMCS address needs to be preserved.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 16 Oct 2018 16:50:04 +0000 (18:50 +0200)]
KVM: nVMX: optimize prepare_vmcs02{,_full} for Enlightened VMCS case
When Enlightened VMCS is in use by L1 hypervisor we can avoid vmwriting
VMCS fields which did not change.
Our first goal is to achieve minimal impact on traditional VMCS case so
we're not wrapping each vmwrite() with an if-changed checker. We also can't
utilize static keys as Enlightened VMCS usage is per-guest.
This patch implements the simpliest solution: checking fields in groups.
We skip single vmwrite() statements as doing the check will cost us
something even in non-evmcs case and the win is tiny. Unfortunately, this
makes prepare_vmcs02_full{,_full}() code Enlightened VMCS-dependent (and
a bit ugly).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 16 Oct 2018 16:50:03 +0000 (18:50 +0200)]
KVM: nVMX: implement enlightened VMPTRLD and VMCLEAR
Per Hyper-V TLFS 5.0b:
"The L1 hypervisor may choose to use enlightened VMCSs by writing 1 to
the corresponding field in the VP assist page (see section 7.8.7).
Another field in the VP assist page controls the currently active
enlightened VMCS. Each enlightened VMCS is exactly one page (4 KB) in
size and must be initially zeroed. No VMPTRLD instruction must be
executed to make an enlightened VMCS active or current.
After the L1 hypervisor performs a VM entry with an enlightened VMCS,
the VMCS is considered active on the processor. An enlightened VMCS
can only be active on a single processor at the same time. The L1
hypervisor can execute a VMCLEAR instruction to transition an
enlightened VMCS from the active to the non-active state. Any VMREAD
or VMWRITE instructions while an enlightened VMCS is active is
unsupported and can result in unexpected behavior."
Keep Enlightened VMCS structure for the current L2 guest permanently mapped
from struct nested_vmx instead of mapping it every time.
Enlightened VMCS is opt-in. The current version does not contain all
fields supported by nested VMX so we must not advertise the
corresponding VMX features if enlightened VMCS is enabled.
Userspace is given the enlightened VMCS version supported by KVM as
part of enabling KVM_CAP_HYPERV_ENLIGHTENED_VMCS. The version is to
be advertised to the nested hypervisor, currently done via a cpuid
leaf for Hyper-V.
Wei Yang [Thu, 4 Oct 2018 02:04:23 +0000 (10:04 +0800)]
KVM: x86: reintroduce pte_list_remove, but including mmu_spte_clear_track_bits
rmap_remove() removes the sptep after locating the correct rmap_head but,
in several cases, the caller has already known the correct rmap_head.
This patch introduces a new pte_list_remove(); because it is known that
the spte is present (or it would not have an rmap_head), it is safe
to remove the tracking bits without any previous check.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peng Hao [Sat, 13 Oct 2018 23:09:55 +0000 (07:09 +0800)]
kvm/x86 : add coalesced pio support
Coalesced pio is based on coalesced mmio and can be used for some port
like rtc port, pci-host config port and so on.
Specially in case of rtc as coalesced pio, some versions of windows guest
access rtc frequently because of rtc as system tick. guest access rtc like
this: write register index to 0x70, then write or read data from 0x71.
writing 0x70 port is just as index and do nothing else. So we can use
coalesced pio to handle this scene to reduce VM-EXIT time.
When starting and closing a virtual machine, it will access pci-host config
port frequently. So setting these port as coalesced pio can reduce startup
and shutdown time.
without my patch, get the vm-exit time of accessing rtc 0x70 and piix 0xcf8
using perf tools: (guest OS : windows 7 64bit)
IO Port Access Samples Samples% Time% Min Time Max Time Avg time
0x70:POUT 86 30.99% 74.59% 9us 29us 10.75us (+- 3.41%)
0xcf8:POUT 1119 2.60% 2.12% 2.79us 56.83us 3.41us (+- 2.23%)
with my patch
IO Port Access Samples Samples% Time% Min Time Max Time Avg time
0x70:POUT 106 32.02% 29.47% 0us 10us 1.57us (+- 7.38%)
0xcf8:POUT 1065 1.67% 0.28% 0.41us 65.44us 0.66us (+- 10.55%)
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lan Tianyu [Sat, 13 Oct 2018 14:54:05 +0000 (22:54 +0800)]
KVM/VMX: Change hv flush logic when ept tables are mismatched.
If ept table pointers are mismatched, flushing tlb for each vcpus via
hv flush interface still helps to reduce vmexits which are triggered
by IPI and INEPT emulation.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Uros Bizjak [Thu, 11 Oct 2018 17:40:44 +0000 (19:40 +0200)]
KVM/x86: Use assembly instruction mnemonics instead of .byte streams
Recently the minimum required version of binutils was changed to 2.20,
which supports all VMX instruction mnemonics. The patch removes
all .byte #defines and uses real instruction mnemonics instead.
The compiler is now able to pass memory operand to the instruction,
so there is no need for memory clobber anymore. Also, the compiler
adds CC register clobber automatically to all extended asm clauses,
so the patch also removes explicit CC clobber.
The immediate benefit of the patch is removal of many unnecesary
register moves, resulting in 1434 saved bytes in vmx.o:
text data bss dec hex filename
151257 18246 8500 178003 2b753 vmx.o
152691 18246 8500 179437 2bced vmx-old.o
Some examples of improvement include removal of unneeded moves
of %rsp to %rax in front of invept and invvpid instructions:
Uros Bizjak [Thu, 11 Oct 2018 17:40:43 +0000 (19:40 +0200)]
KVM/x86: Fix invvpid and invept register operand size in 64-bit mode
Register operand size of invvpid and invept instruction in 64-bit mode
has always 64 bits. Adjust inline function argument type to reflect
correct size.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86/kvm/mmu: check if MMU reconfiguration is needed in init_kvm_nested_mmu()
We don't use root page role for nested_mmu, however, optimizing out
re-initialization in case nothing changed is still valuable as this
is done for every nested vmentry.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed
MMU reconfiguration in init_kvm_tdp_mmu()/kvm_init_shadow_mmu() can be
avoided if the source data used to configure it didn't change; enhance
MMU extended role with the required fields and consolidate common code in
kvm_calc_mmu_role_common().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86/kvm/mmu: make space for source data caching in struct kvm_mmu
In preparation to MMU reconfiguration avoidance we need a space to
cache source data. As this partially intersects with kvm_mmu_page_role,
create 64bit sized union kvm_mmu_role holding both base and extended data.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When EPT is used for nested guest we need to re-init MMU as shadow
EPT MMU (nested_ept_init_mmu_context() does that). When we return back
from L2 to L1 kvm_mmu_reset_context() in nested_vmx_load_cr3() resets
MMU back to normal TDP mode. Add a special 'guest_mmu' so we can use
separate root caches; the improved hit rate is not very important for
single vCPU performance, but it avoids contention on the mmu_lock for
many vCPUs.
On the nested CPUID benchmark, with 16 vCPUs, an L2->L1->L2 vmexit
goes from 42k to 26k cycles.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86/kvm/mmu.c: set get_pdptr hook in kvm_init_shadow_ept_mmu()
kvm_init_shadow_ept_mmu() doesn't set get_pdptr() hook and is this
not a problem just because MMU context is already initialized and this
hook points to kvm_pdptr_read(). As we're intended to use a dedicated
MMU for shadow EPT MMU set this hook explicitly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
x86/kvm/mmu: make vcpu->mmu a pointer to the current MMU
As a preparation to full MMU split between L1 and L2 make vcpu->arch.mmu
a pointer to the currently used mmu. For now, this is always
vcpu->arch.root_mmu. No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Paolo Bonzini [Wed, 22 Aug 2018 17:59:33 +0000 (19:59 +0200)]
kvm: x86: optimize dr6 restore
The quote from the comment almost says it all: we are currently zeroing
the guest dr6 in kvm_arch_vcpu_put, because do_debug expects it. However,
the host %dr6 is either:
- zero because the guest hasn't run after kvm_arch_vcpu_load
- written from vcpu->arch.dr6 by vcpu_enter_guest
- written by the guest and copied to vcpu->arch.dr6 by ->sync_dirty_debug_regs().
Therefore, we can skip the write if vcpu->arch.dr6 is already zero. We
may do extra useless writes if vcpu->arch.dr6 is nonzero but the guest
hasn't run; however that is less important for performance.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Wed, 10 Oct 2018 15:14:38 +0000 (17:14 +0200)]
KVM: x86: hyperv: optimize sparse VP set processing
Rewrite kvm_hv_flush_tlb()/send_ipi_vcpus_mask() making them cleaner and
somewhat more optimal.
hv_vcpu_in_sparse_set() is converted to sparse_set_to_vcpu_mask()
which copies sparse banks u64-at-a-time and then, depending on the
num_mismatched_vp_indexes value, returns immediately or does
vp index to vcpu index conversion by walking all vCPUs.
To support the change and make kvm_hv_send_ipi() look similar to
kvm_hv_flush_tlb() send_ipi_vcpus_mask() is introduced.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: add option to perform early consistency checks via H/W
KVM defers many VMX consistency checks to the CPU, ostensibly for
performance reasons[1], including checks that result in VMFail (as
opposed to VMExit). This behavior may be undesirable for some users
since this means KVM detects certain classes of VMFail only after it
has processed guest state, e.g. emulated MSR load-on-entry. Because
there is a strict ordering between checks that cause VMFail and those
that cause VMExit, i.e. all VMFail checks are performed before any
checks that cause VMExit, we can detect (almost) all VMFail conditions
via a dry run of sorts. The almost qualifier exists because some
state in vmcs02 comes from L0, e.g. VPID, which means that hardware
will never detect an invalid VPID in vmcs12 because it never sees
said value. Software must (continue to) explicitly check such fields.
After preparing vmcs02 with all state needed to pass the VMFail
consistency checks, optionally do a "test" VMEnter with an invalid
GUEST_RFLAGS. If the VMEnter results in a VMExit (due to bad guest
state), then we can safely say that the nested VMEnter should not
VMFail, i.e. any VMFail encountered in nested_vmx_vmexit() must
be due to an L0 bug. GUEST_RFLAGS is used to induce VMExit as it
is unconditionally loaded on all implementations of VMX, has an
invalid value that is writable on a 32-bit system and its consistency
check is performed relatively early in all implementations (the exact
order of consistency checks is micro-architectural).
Unfortunately, since the "passing" case causes a VMExit, KVM must
be extra diligent to ensure that host state is restored, e.g. DR7
and RFLAGS are reset on VMExit. Failure to restore RFLAGS.IF is
particularly fatal.
And of course the extra VMEnter and VMExit impacts performance.
The raw overhead of the early consistency checks is ~6% on modern
hardware (though this could easily vary based on configuration),
while the added latency observed from the L1 VMM is ~10%. The
early consistency checks do not occur in a vacuum, e.g. spending
more time in L0 can lead to more interrupts being serviced while
emulating VMEnter, thereby increasing the latency observed by L1.
Add a module param, early_consistency_checks, to provide control
over whether or not VMX performs the early consistency checks.
In addition to standard on/off behavior, the param accepts a value
of -1, which is essentialy an "auto" setting whereby KVM does
the early checks only when it thinks it's running on bare metal.
When running nested, doing early checks is of dubious value since
the resulting behavior is heavily dependent on L0. In the future,
the "auto" setting could also be used to default to skipping the
early hardware checks for certain configurations/platforms if KVM
reaches a state where it has 100% coverage of VMFail conditions.
[1] To my knowledge no one has implemented and tested full software
emulation of the VMFail consistency checks. Until that happens,
one can only speculate about the actual performance overhead of
doing all VMFail consistency checks in software. Obviously any
code is slower than no code, but in the grand scheme of nested
virtualization it's entirely possible the overhead is negligible.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: vmx: write HOST_IA32_EFER in vmx_set_constant_host_state()
EFER is constant in the host and writing it once during setup means
we can skip writing the host value in add_atomic_switch_msr_special().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: call kvm_skip_emulated_instruction in nested_vmx_{fail,succeed}
... as every invocation of nested_vmx_{fail,succeed} is immediately
followed by a call to kvm_skip_emulated_instruction(). This saves
a bit of code and eliminates some silly paths, e.g. nested_vmx_run()
ended up with a goto label purely used to call and return
kvm_skip_emulated_instruction().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: do not call nested_vmx_succeed() for consistency check VMExit
EFLAGS is set to a fixed value on VMExit, calling nested_vmx_succeed()
is unnecessary and wrong.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: do not skip VMEnter instruction that succeeds
A successful VMEnter is essentially a fancy indirect branch that
pulls the target RIP from the VMCS. Skipping the instruction is
unnecessary (RIP will get overwritten by the VMExit handler) and
is problematic because it can incorrectly suppress a #DB due to
EFLAGS.TF when a VMFail is detected by hardware (happens after we
skip the instruction).
Now that vmx_nested_run() is not prematurely skipping the instr,
use the full kvm_skip_emulated_instruction() in the VMFail path
of nested_vmx_vmexit(). We also need to explicitly update the
GUEST_INTERRUPTIBILITY_INFO when loading vmcs12 host state.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: do early preparation of vmcs02 before check_vmentry_postreqs()
In anticipation of using vmcs02 to do early consistency checks, move
the early preparation of vmcs02 prior to checking the postreqs. The
downside of this approach is that we'll unnecessary load vmcs02 in
the case that check_vmentry_postreqs() fails, but that is essentially
our slow path anyways (not actually slow, but it's the path we don't
really care about optimizing).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: initialize vmcs02 constant exactly once (per VMCS)
Add a dedicated flag to track if vmcs02 has been initialized, i.e.
the constant state for vmcs02 has been written to the backing VMCS.
The launched flag (in struct loaded_vmcs) gets cleared on logical
CPU migration to mirror hardware behavior[1], i.e. using the launched
flag to determine whether or not vmcs02 constant state needs to be
initialized results in unnecessarily re-initializing the VMCS when
migrating between logical CPUS.
[1] The active VMCS needs to be VMCLEARed before it can be migrated
to a different logical CPU. Hardware's VMCS cache is per-CPU
and is not coherent between CPUs. VMCLEAR flushes the cache so
that any dirty data is written back to memory. A side effect
of VMCLEAR is that it also clears the VMCS's internal launch
flag, which KVM must mirror because VMRESUME must be used to
run a previously launched VMCS.
Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: split pieces of prepare_vmcs02() to prepare_vmcs02_early()
Add prepare_vmcs02_early() and move pieces of prepare_vmcs02() to the
new function. prepare_vmcs02_early() writes the bits of vmcs02 that
a) must be in place to pass the VMFail consistency checks (assuming
vmcs12 is valid) and b) are needed recover from a VMExit, e.g. host
state that is loaded on VMExit. Splitting the functionality will
enable KVM to leverage hardware to do VMFail consistency checks via
a dry run of VMEnter and recover from a potential VMExit without
having to fully initialize vmcs02.
Add prepare_vmcs02_constant_state() to handle writing vmcs02 state that
comes from vmcs01 and never changes, i.e. we don't need to rewrite any
of the vmcs02 that is effectively constant once defined.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vmx->pml_pg is allocated by vmx_create_vcpu() and is only nullified
when the vCPU is destroyed by vmx_free_vcpu(). Remove the ASSERTs
on vmx->pml_pg, there is no need to carry debug code that provides
no value to the current code base.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: vVMX: rename label for post-enter_guest_mode consistency check
Rename 'fail' to 'vmentry_fail_vmexit_guest_mode' to make it more
obvious that it's simply a different entry point to the VMExit path,
whose purpose is unwind the updates done prior to calling
prepare_vmcs02().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: assimilate nested_vmx_entry_failure() into nested_vmx_enter_non_root_mode()
Handling all VMExits due to failed consistency checks on VMEnter in
nested_vmx_enter_non_root_mode() consolidates all relevant code into
a single location, and removing nested_vmx_entry_failure() eliminates
a confusing function name and label. For a VMEntry, "fail" and its
derivatives has a very specific meaning due to the different behavior
of a VMEnter VMFail versus VMExit, i.e. it wasn't obvious that
nested_vmx_entry_failure() handled VMExit scenarios.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: move check_vmentry_postreqs() call to nested_vmx_enter_non_root_mode()
In preparation of supporting checkpoint/restore for nested state,
commit 47e220b3e2ca ("kvm: nVMX: Split VMCS checks from nested_vmx_run()")
modified check_vmentry_postreqs() to only perform the guest EFER
consistency checks when nested_run_pending is true. But, in the
normal nested VMEntry flow, nested_run_pending is only set after
check_vmentry_postreqs(), i.e. the consistency check is being skipped.
Alternatively, nested_run_pending could be set prior to calling
check_vmentry_postreqs() in nested_vmx_run(), but placing the
consistency checks in nested_vmx_enter_non_root_mode() allows us
to split prepare_vmcs02() and interleave the preparation with
the consistency checks without having to change the call sites
of nested_vmx_enter_non_root_mode(). In other words, the rest
of the consistency check code in nested_vmx_run() will be joining
the postreqs checks in future patches.
Fixes: 47e220b3e2ca ("kvm: nVMX: Split VMCS checks from nested_vmx_run()") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Jim Mattson <jmattson@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: rename enter_vmx_non_root_mode to nested_vmx_enter_non_root_mode
...to be more consistent with the nested VMX nomenclature.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: try to set EFER bits correctly when initializing controls
VM_ENTRY_IA32E_MODE and VM_{ENTRY,EXIT}_LOAD_IA32_EFER will be
explicitly set/cleared as needed by vmx_set_efer(), but attempt
to get the bits set correctly when intializing the control fields.
Setting the value correctly can avoid multiple VMWrites.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: vmx: do not unconditionally clear EFER switching
Do not unconditionally call clear_atomic_switch_msr() when updating
EFER. This adds up to four unnecessary VMWrites in the case where
guest_efer != host_efer, e.g. if the load_on_{entry,exit} bits were
already set.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: reset cache/shadows when switching loaded VMCS
Reset the vm_{entry,exit}_controls_shadow variables as well as the
segment cache after loading a new VMCS in vmx_switch_vmcs(). The
shadows/cache track VMCS data, i.e. they're stale every time we
switch to a new VMCS regardless of reason.
This fixes a bug where stale control shadows would be consumed after
a nested VMExit due to a failed consistency check.
Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: use vm_exit_controls_init() to write exit controls for vmcs02
Write VM_EXIT_CONTROLS using vm_exit_controls_init() when configuring
vmcs02, otherwise vm_exit_controls_shadow will be stale. EFER in
particular can be corrupted if VM_EXIT_LOAD_IA32_EFER is not updated
due to an incorrect shadow optimization, which can crash L0 due to
EFER not being loaded on exit. This does not occur with the current
code base simply because update_transition_efer() unconditionally
clears VM_EXIT_LOAD_IA32_EFER before conditionally setting it, and
because a nested guest always starts with VM_EXIT_LOAD_IA32_EFER
clear, i.e. we'll only ever unnecessarily clear the bit. That is,
until someone optimizes update_transition_efer()...
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: move vmcs12 EPTP consistency check to check_vmentry_prereqs()
An invalid EPTP causes a VMFail(VMXERR_ENTRY_INVALID_CONTROL_FIELD),
not a VMExit.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: move host EFER consistency checks to VMFail path
Invalid host state related to loading EFER on VMExit causes a
VMFail(VMXERR_ENTRY_INVALID_HOST_STATE_FIELD), not a VMExit.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Thu, 13 Sep 2018 18:54:48 +0000 (11:54 -0700)]
KVM: nVMX: Always reflect #NM VM-exits to L1
When bit 3 (corresponding to CR0.TS) of the VMCS12 cr0_guest_host_mask
field is clear, the VMCS12 guest_cr0 field does not necessarily hold
the current value of the L2 CR0.TS bit, so the code that checked for
L2's CR0.TS bit being set was incorrect. Moreover, I'm not sure that
the CR0.TS check was adequate. (What if L2's CR0.EM was set, for
instance?)
Fortunately, lazy FPU has gone away, so L0 has lost all interest in
intercepting #NM exceptions. See commit 0754d6d2ddcf ("KVM: x86:
remove code for lazy FPU handling"). Therefore, there is no longer any
question of which hypervisor gets first dibs. The #NM VM-exit should
always be reflected to L1. (Note that the corresponding bit must be
set in the VMCS12 exception_bitmap field for there to be an #NM
VM-exit at all.)
Fixes: 395bc53023282 ("kvm, vmx: Really fix lazy FPU on nested guest") Reported-by: Abhiroop Dabral <adabral@paloaltonetworks.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Tested-by: Abhiroop Dabral <adabral@paloaltonetworks.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using hypercall for sending IPIs is faster because this allows to specify
any number of vCPUs (even > 64 with sparse CPU set), the whole procedure
will take only one VMEXIT.
Current Hyper-V TLFS (v5.0b) claims that HvCallSendSyntheticClusterIpi
hypercall can't be 'fast' (passing parameters through registers) but
apparently this is not true, Windows always uses it as 'fast' so we need
to support that.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: hyperv: keep track of mismatched VP indexes
In most common cases VP index of a vcpu matches its vcpu index. Userspace
is, however, free to set any mapping it wishes and we need to account for
that when we need to find a vCPU with a particular VP index. To keep search
algorithms optimal in both cases introduce 'num_mismatched_vp_indexes'
counter showing how many vCPUs with mismatching VP index we have. In case
the counter is zero we can assume vp_index == vcpu_idx.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Virtual processors are identified by using an index (VP index). The
> maximum number of virtual processors per partition supported by the
> current implementation of the hypervisor can be obtained through CPUID
> leaf 0x40000005. A virtual processor index must be less than the
> maximum number of virtual processors per partition.
Forbid userspace to set VP_INDEX above KVM_MAX_VCPUS. get_vcpu_by_vpidx()
can now be optimized to bail early when supplied vpidx is >= KVM_MAX_VCPUS.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nVMX x86: Make nested_vmx_check_pml_controls() concise
Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wei Yang [Wed, 5 Sep 2018 21:58:16 +0000 (05:58 +0800)]
KVM: x86: adjust kvm_mmu_page member to save 8 bytes
On a 64bits machine, struct is naturally aligned with 8 bytes. Since
kvm_mmu_page member *unsync* and *role* are less then 4 bytes, we can
rearrange the sequence to compace the struct.
As the comment shows, *role* and *gfn* are used to key the shadow page. In
order to keep the comment valid, this patch moves the *unsync* up and
exchange the position of *role* and *gfn*.
From /proc/slabinfo, it shows the size of kvm_mmu_page is 8 bytes less and
with one more object per slap after applying this patch.
KVM: nVMX: restore host state in nested_vmx_vmexit for VMFail
A VMEnter that VMFails (as opposed to VMExits) does not touch host
state beyond registers that are explicitly noted in the VMFail path,
e.g. EFLAGS. Host state does not need to be loaded because VMFail
is only signaled for consistency checks that occur before the CPU
starts to load guest state, i.e. there is no need to restore any
state as nothing has been modified. But in the case where a VMFail
is detected by hardware and not by KVM (due to deferring consistency
checks to hardware), KVM has already loaded some amount of guest
state. Luckily, "loaded" only means loaded to KVM's software model,
i.e. vmcs01 has not been modified. So, unwind our software model to
the pre-VMEntry host state.
Not restoring host state in this VMFail path leads to a variety of
failures because we end up with stale data in vcpu->arch, e.g. CR0,
CR4, EFER, etc... will all be out of sync relative to vmcs01. Any
significant delta in the stale data is all but guaranteed to crash
L1, e.g. emulation of SMEP, SMAP, UMIP, WP, etc... will be wrong.
An alternative to this "soft" reload would be to load host state from
vmcs12 as if we triggered a VMExit (as opposed to VMFail), but that is
wildly inconsistent with respect to the VMX architecture, e.g. an L1
VMM with separate VMExit and VMFail paths would explode.
Note that this approach does not mean KVM is 100% accurate with
respect to VMX hardware behavior, even at an architectural level
(the exact order of consistency checks is microarchitecture specific).
But 100% emulation accuracy isn't the goal (with this patch), rather
the goal is to be consistent in the information delivered to L1, e.g.
a VMExit should not fall-through VMENTER, and a VMFail should not jump
to HOST_RIP.
This technically reverts commit "e961421ff798 (KVM: nVMX: Fix mmu
context after VMLAUNCH/VMRESUME failure)", but retains the core
aspects of that patch, just in an open coded form due to the need to
pull state from vmcs01 instead of vmcs12. Restoring host state
resolves a variety of issues introduced by commit "71b7cd8e8004
(kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly)",
which remedied the incorrect behavior of treating VMFail like VMExit
but in doing so neglected to restore arch state that had been modified
prior to attempting nested VMEnter.
A sample failure that occurs due to stale vcpu.arch state is a fault
of some form while emulating an LGDT (due to emulated UMIP) from L1
after a failed VMEntry to L3, in this case when running the KVM unit
test test_tpr_threshold_values in L1. L0 also hits a WARN in this
case due to a stale arch.cr4.UMIP.
L1:
BUG: unable to handle kernel paging request at ffffc90000663b9e
PGD 276512067 P4D 276512067 PUD 276513067 PMD 274efa067 PTE 8000000271de2163
Oops: 0009 [#1] SMP
CPU: 5 PID: 12495 Comm: qemu-system-x86 Tainted: G W 4.18.0-rc2+ #2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:native_load_gdt+0x0/0x10
Jim Mattson [Fri, 21 Sep 2018 17:36:17 +0000 (10:36 -0700)]
KVM: nVMX: Clear reserved bits of #DB exit qualification
According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit
qualification field for debug exceptions are reserved (cleared to
0). However, the SDM is incorrect about bit 16 (corresponding to
DR6.RTM). This bit should be set if a debug exception (#DB) or a
breakpoint exception (#BP) occurred inside an RTM region while
advanced debugging of RTM transactional regions was enabled. Note that
this is the opposite of DR6.RTM, which "indicates (when clear) that a
debug exception (#DB) or breakpoint exception (#BP) occurred inside an
RTM region while advanced debugging of RTM transactional regions was
enabled."
There is still an issue with stale DR6 bits potentially being
misreported for the current debug exception. DR6 should not have been
modified before vectoring the #DB exception, and the "new DR6 bits"
should be available somewhere, but it was and they aren't.
Fixes: e678828d14620 ("KVM: nVMX: fixes to nested virt interrupt injection") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrew Jones [Tue, 18 Sep 2018 17:54:32 +0000 (19:54 +0200)]
kvm: selftests: port dirty_log_test to aarch64
While we're messing with the code for the port and to support guest
page sizes that are less than the host page size, we also make some
code formatting cleanups and apply sync_global_to_guest().
Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andrew Jones [Tue, 18 Sep 2018 17:54:31 +0000 (19:54 +0200)]
kvm: selftests: add vcpu support for aarch64
This code adds VM and VCPU setup code for the VM_MODE_FLAT48PG mode.
The VM_MODE_FLAT48PG isn't yet fully supportable, as it defines the
guest physical address limit as 52-bits, and KVM currently only
supports guests with up to 40-bit physical addresses (see
KVM_PHYS_SHIFT). VM_MODE_FLAT48PG will work fine, though, as long as
no >= 40-bit physical addresses are used.
Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / kernel.git / log