Lukas Bulwahn [Wed, 26 Oct 2022 12:00:29 +0000 (14:00 +0200)]
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
Before the do-while loop in mtree_range_walk(), the variables next, min,
max need to be initialized. The variables last, prev_min and prev_max are
set within the loop body before they are eventually used after exiting the
loop body.
As it is a do-while loop, the loop body is executed at least once, so the
variables last, prev_min and prev_max do not need to be initialized before
the loop body.
Remove unneeded initialization of last and prev_min.
The needless initialization was reported by clang-analyzer as Dead Stores.
As the compiler already identifies these assignments as unneeded, it
optimizes the assignments away. Hence:
Liam Howlett [Tue, 25 Oct 2022 16:12:49 +0000 (16:12 +0000)]
mmap: fix remap_file_pages() regression
When using the VMA iterator, the final execution will set the variable
'next' to NULL which causes the function to fail out. Restore the break
in the loop to exit the VMA iterator early without clearing NULL fixes the
issue.
Ira Weiny [Tue, 25 Oct 2022 22:01:08 +0000 (15:01 -0700)]
mm/shmem: ensure proper fallback if page faults
The kernel test robot flagged a recursive lock as a result of a conversion
from kmap_atomic() to kmap_local_folio()[Link]
The cause was due to the code depending on the kmap_atomic() side effect
of disabling page faults. In that case the code expects the fault to fail
and take the fallback case.
git archaeology implied that the recursion may not be an actual bug.[1]
However, depending on the implementation of the mmap_lock and the
condition of the call there may still be a deadlock.[2] So this is not
purely a lockdep issue. Considering a single threaded call stack there
are 3 options.
1) Different mm's are in play (no issue)
2) Readlock implementation is recursive and same mm is in play
(no issue)
3) Readlock implementation is _not_ recursive (issue)
The mmap_lock is recursive so with a single thread there is no issue.
However, Matthew pointed out a deadlock scenario when you consider
additional process' and threads thusly.
"The readlock implementation is only recursive if nobody else has taken a
write lock. If you have a multithreaded process, one of the other threads
can call mmap() and that will prevent recursion (due to fairness). Even
if it's a different process that you're trying to acquire the mmap read
lock on, you can still get into a deadly embrace. eg:
process A thread 1 takes read lock on own mmap_lock
process A thread 2 calls mmap, blocks taking write lock
process B thread 1 takes page fault, read lock on own mmap lock
process B thread 2 calls mmap, blocks taking write lock
process A thread 1 blocks taking read lock on process B
process B thread 1 blocks taking read lock on process A
Now all four threads are blocked waiting for each other."
Regardless using pagefault_disable() ensures that no matter what locking
implementation is used a deadlock will not occur. Add an explicit
pagefault_disable() and a big comment to explain this for future souls
looking at this code.
Link: https://lkml.kernel.org/r/20221025220108.2366043-1-ira.weiny@intel.com Link: https://lore.kernel.org/r/202210211215.9dc6efb5-yujie.liu@intel.com Fixes: 2fb0894ba432 ("shmem: convert shmem_mfill_atomic_pte() to use a folio") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by: kernel test robot <yujie.liu@intel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ira Weiny [Mon, 24 Oct 2022 04:34:52 +0000 (21:34 -0700)]
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page() which is appropriate for any thread local context.[1]
A recent locking bug report with userfaultfd showed that the conversion of
the kmap_atomic()'s in those code flows requires care with regard to the
prevention of deadlock.[2]
git archaeology implied that the recursion may not be an actual bug.[3]
However, depending on the implementation of the mmap_lock and the
condition of the call there may still be a deadlock.[4] So this is not
purely a lockdep issue. Considering a single threaded call stack there
are 3 options.
1) Different mm's are in play (no issue)
2) Readlock implementation is recursive and same mm is in play
(no issue)
3) Readlock implementation is _not_ recursive (issue)
The mmap_lock is recursive so with a single thread there is no issue.
However, Matthew pointed out a deadlock scenario when you consider
additional process' and threads thusly.
"The readlock implementation is only recursive if nobody else has taken a
write lock. If you have a multithreaded process, one of the other threads
can call mmap() and that will prevent recursion (due to fairness). Even
if it's a different process that you're trying to acquire the mmap read
lock on, you can still get into a deadly embrace. eg:
process A thread 1 takes read lock on own mmap_lock
process A thread 2 calls mmap, blocks taking write lock
process B thread 1 takes page fault, read lock on own mmap lock
process B thread 2 calls mmap, blocks taking write lock
process A thread 1 blocks taking read lock on process B
process B thread 1 blocks taking read lock on process A
Now all four threads are blocked waiting for each other."
Regardless using pagefault_disable() ensures that no matter what locking
implementation is used a deadlock will not occur.
Complete kmap conversion in userfaultfd by replacing the kmap() and
kmap_atomic() calls with kmap_local_page(). When replacing the
kmap_atomic() call ensure page faults continue to be disabled to support
the correct fall back behavior and add a comment to inform future souls of
the requirement.
Ensure that KMSAN builds replace memset/memcpy/memmove calls with the
respective __msan_XXX functions, and that none of the macros are redefined
twice. This should allow building kernel with both CONFIG_KMSAN and
CONFIG_FORTIFY_SOURCE.
x86: asm: make sure __put_user_size() evaluates pointer once
User access macros must ensure their arguments are evaluated only once if
they are used more than once in the macro body. Adding
instrument_put_user() to __put_user_size() resulted in double evaluation
of the `ptr` argument, which led to correctness issues when performing
e.g. unsafe_put_user(..., p++, ...).
To fix those issues, evaluate the `ptr` argument of __put_user_size() at
the beginning of the macro.
Link: https://lkml.kernel.org/r/20221024212144.2852069-4-glider@google.com Fixes: 3420bb532956 ("x86: asm: instrument usercopy in get_user() and put_user()") Signed-off-by: Alexander Potapenko <glider@google.com> Reported-by: youling257 <youling257@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
KMSAN adds a lot of instrumentation to the code, which results in
increased stack usage (up to 2048 bytes and more in some cases). It's
hard to predict how big the stack frames can be, so we disable the
warnings for KMSAN instead.
Baolin Wang [Mon, 24 Oct 2022 08:34:21 +0000 (16:34 +0800)]
mm: migrate: fix return value if all subpages of THPs are migrated successfully
During THP migration, if THPs are not migrated but they are split and all
subpages are migrated successfully, migrate_pages() will still return the
number of THP pages that were not migrated. This will confuse the callers
of migrate_pages(). For example, the longterm pinning will failed though
all pages are migrated successfully.
Thus we should return 0 to indicate that all pages are migrated in this
case
Link: https://lkml.kernel.org/r/de386aa864be9158d2f3b344091419ea7c38b2f7.1666599848.git.baolin.wang@linux.alibaba.com Fixes: 541d6f378f74 ("mm: migrate: fix the return value of migrate_pages()") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I just got time to revisit this and found that the root cause is we simply
messed up with the vma check, so that for !PTE_MARKER_UFFD_WP system, we
will allow UFFDIO_REGISTER of MINOR & WP upon shmem as the check was
wrong:
if (vm_flags & VM_UFFD_MINOR)
return is_vm_hugetlb_page(vma) || vma_is_shmem(vma);
Where we'll allow anything to pass on shmem as long as minor mode is
requested.
Axel did it right when introducing minor mode but I messed it up in b381dbf5e6bc when moving code around. Fix it.
Hugh Dickins [Sat, 22 Oct 2022 07:51:06 +0000 (00:51 -0700)]
mm: prep_compound_tail() clear page->private
Although page allocation always clears page->private in the first page or
head page of an allocation, it has never made a point of clearing
page->private in the tails (though 0 is often what is already there).
But now commit 4854ad291460 ("mm/huge_memory: do not clobber swp_entry_t
during THP split") issues a warning when page_tail->private is found to be
non-0 (unless it's swapcache).
We could just delete the warning, but today's consensus appears to want
page->private to be 0, unless there's a good reason for it to be set: so
now clear it in prep_compound_tail() (more general than just for THP; but
not for high order allocation, which makes no pass down the tails).
Link: https://lkml.kernel.org/r/1c4233bb-4e4d-5969-fbd4-96604268a285@google.com Fixes: 4854ad291460 ("mm/huge_memory: do not clobber swp_entry_t during THP split") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rik van Riel [Fri, 21 Oct 2022 23:28:05 +0000 (19:28 -0400)]
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
A common use case for hugetlbfs is for the application to create
memory pools backed by huge pages, which then get handed over to
some malloc library (eg. jemalloc) for further management.
That malloc library may be doing MADV_DONTNEED calls on memory
that is no longer needed, expecting those calls to happen on
PAGE_SIZE boundaries.
However, currently the MADV_DONTNEED code rounds up any such
requests to HPAGE_PMD_SIZE boundaries. This leads to undesired
outcomes when jemalloc expects a 4kB MADV_DONTNEED, but 2MB of
memory get zeroed out, instead.
Use of pre-built shared libraries means that user code does not
always know the page size of every memory arena in use.
Avoid unexpected data loss with MADV_DONTNEED by rounding up
only to PAGE_SIZE (in do_madvise), and rounding down to huge
page granularity.
That way programs will only get as much memory zeroed out as
they requested.
Link: https://lkml.kernel.org/r/20221021192805.366ad573@imladris.surriel.com Fixes: ee7e0c34358a ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Maria Yu [Fri, 21 Oct 2022 10:15:55 +0000 (18:15 +0800)]
mm/page_isolation: fix clang deadcode warning
When !CONFIG_VM_BUG_ON, there is warning of
clang-analyzer-deadcode.DeadStores:
Value stored to 'mt' during its initialization is never read.
Link: https://lkml.kernel.org/r/20221021101555.7992-2-quic_aiquny@quicinc.com Signed-off-by: Maria Yu <quic_aiquny@quicinc.com> Cc: David Hildenbrand <david@redhat.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Fri, 21 Oct 2022 04:19:22 +0000 (21:19 -0700)]
ipc/msg.c: fix percpu_counter use after free
These percpu counters are referenced in free_ipcs->freeque, so destroy
them later.
Fixes: 66ea835153c3 ("ipc/msg: mitigate the lock contention with percpu counter") Reported-by: syzbot+96e659d35b9d6b541152@syzkaller.appspotmail.com Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Jiebin Sun <jiebin.sun@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Waiman Long [Thu, 20 Oct 2022 17:56:19 +0000 (13:56 -0400)]
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
Commit 918a25c5c6dd ("mm/kmemleak: prevent soft lockup in first object
iteration loop of kmemleak_scan()") adds cond_resched() in the first
object iteration loop of kmemleak_scan(). However, it turns that the 2nd
objection iteration loop can still cause soft lockup to happen in some
cases. So add a cond_resched() call in the 2nd and 3rd loops as well to
prevent that and for completeness.
Link: https://lkml.kernel.org/r/20221020175619.366317-1-longman@redhat.com Fixes: 918a25c5c6dd ("mm/kmemleak: prevent soft lockup in first object iteration loop of kmemleak_scan()") Signed-off-by: Waiman Long <longman@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Phillip Lougher [Thu, 20 Oct 2022 22:36:15 +0000 (23:36 +0100)]
squashfs: fix extending readahead beyond end of file
The readahead code will try to extend readahead to the entire size of the
Squashfs data block.
But, it didn't take into account that the last block at the end of the
file may not be a whole block. In this case, the code would extend
readahead to beyond the end of the file, leaving trailing pages.
Fix this by only requesting the expected number of pages.
Phillip Lougher [Thu, 20 Oct 2022 22:36:14 +0000 (23:36 +0100)]
squashfs: fix read regression introduced in readahead code
Patch series "squashfs: fix some regressions introduced in the readahead
code".
This patchset fixes 3 regressions introduced by the recent readahead code
changes. The first regression is causing "snaps" to randomly fail after a
couple of hours or days, which how the regression came to light.
This patch (of 3):
If a file isn't a whole multiple of the page size, the last page will have
trailing bytes unfilled.
There was a mistake in the readahead code which did this. In particular
it incorrectly assumed that the last page in the readahead page array
(page[nr_pages - 1]) will always contain the last page in the block, which
if we're at file end, will be the page that needs to be zero filled.
But the readahead code may not return the last page in the block, which
means it is unmapped and will be skipped by the decompressors (a temporary
buffer used).
In this case the zero filling code will zero out the wrong page, leading
to data corruption.
Fix this by by extending the "page actor" to return the last page if
present, or NULL if a temporary buffer was used.
Alistair Popple [Wed, 19 Oct 2022 12:29:34 +0000 (23:29 +1100)]
nouveau: fix migrate_to_ram() for faulting page
Commit d7405e828be4 ("mm/memory.c: fix race when faulting a device private
page") changed the migrate_to_ram() callback to take a reference on the
device page to ensure it can't be freed while handling the fault.
Unfortunately the corresponding update to Nouveau to accommodate this
change was inadvertently dropped from that patch causing GPU to CPU
migration to fail so add it here.
Link: https://lkml.kernel.org/r/20221019122934.866205-1-apopple@nvidia.com Fixes: d7405e828be4 ("mm/memory.c: fix race when faulting a device private page") Signed-off-by: Alistair Popple <apopple@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The problem can be reproduced with the mmtests config
config-workload-stressng-mmap. It does not always happen and when it
triggers is variable but it has happened on multiple machines.
The intent of commit a1d8506fb824 patch was to avoid the case where
PG_private is clear but folio->private is not-NULL. However, THP tail
pages uses page->private for "swp_entry_t if folio_test_swapcache()" as
stated in the documentation for struct folio. This patch only clobbers
page->private for tail pages if the head page was not in swapcache and
warns once if page->private had an unexpected value.
Link: https://lkml.kernel.org/r/20221019134156.zjyyn5aownakvztf@techsingularity.net Fixes: a1d8506fb824 ("mm: Clear page->private when splitting or migrating a page") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <shy828301@gmail.com> Cc: Brian Foster <bfoster@redhat.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Kravetz [Wed, 19 Oct 2022 20:19:57 +0000 (13:19 -0700)]
hugetlb: fix memory leak associated with vma_lock structure
The hugetlb vma_lock structure hangs off the vm_private_data pointer of
sharable hugetlb vmas. The structure is vma specific and can not be
shared between vmas. At fork and various other times, vmas are duplicated
via vm_area_dup(). When this happens, the pointer in the newly created
vma must be cleared and the structure reallocated. Two hugetlb specific
routines deal with this hugetlb_dup_vma_private and hugetlb_vm_op_open.
Both routines are called for newly created vmas. hugetlb_dup_vma_private
would always clear the pointer and hugetlb_vm_op_open would allocate the
new vms_lock structure. This did not work in the case of this calling
sequence pointed out in [1].
move_vma
copy_vma
new_vma = vm_area_dup(vma);
new_vma->vm_ops->open(new_vma); --> new_vma has its own vma lock.
is_vm_hugetlb_page(vma)
clear_vma_resv_huge_pages
hugetlb_dup_vma_private --> vma->vm_private_data is set to NULL
When clearing hugetlb_dup_vma_private we actually leak the associated
vma_lock structure.
The vma_lock structure contains a pointer to the associated vma. This
information can be used in hugetlb_dup_vma_private and hugetlb_vm_op_open
to ensure we only clear the vm_private_data of newly created (copied)
vmas. In such cases, the vma->vma_lock->vma field will not point to the
vma.
Update hugetlb_dup_vma_private and hugetlb_vm_op_open to not clear
vm_private_data if vma->vma_lock->vma == vma. Also, log a warning if
hugetlb_vm_op_open ever encounters the case where vma_lock has already
been correctly allocated for the vma.
Liam R. Howlett [Tue, 31 May 2022 13:20:51 +0000 (09:20 -0400)]
mm/page_alloc: reduce potential fragmentation in make_alloc_exact()
Try to avoid using the left over split page on the next request for a page
by calling __free_pages_ok() with FPI_TO_TAIL. This increases the
potential of defragmenting memory when it's used for a short period of
time.
Rik van Riel [Tue, 18 Oct 2022 00:25:05 +0000 (20:25 -0400)]
mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages
The h->*_huge_pages counters are protected by the hugetlb_lock, but
alloc_huge_page has a corner case where it can decrement the counter
outside of the lock.
This could lead to a corrupted value of h->resv_huge_pages, which we have
observed on our systems.
Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a
potential race.
Link: https://lkml.kernel.org/r/20221017202505.0e6a4fcd@imladris.surriel.com Fixes: 5872dee8abef ("mm: hugetlb: fix hugepage memory leak caused by wrong reserve count") Signed-off-by: Rik van Riel <riel@surriel.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Glen McCready <gkmccready@meta.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Tue, 18 Oct 2022 19:17:12 +0000 (19:17 +0000)]
mm/mmap: fix MAP_FIXED address return on VMA merge
mmap should return the start address of newly mapped area when successful.
On a successful merge of a VMA, the return address was changed and thus
was violating that expectation from userspace.
This is a restoration of functionality provided by 0f5860a88419
(mm/mmap.c: fix mmap return value when vma is merged after call_mmap()).
For completeness of fixing MAP_FIXED, implement the comments from the
previous discussion to never update the address and fail if the address
changes. Leaving the error as a WARN_ON() to avoid crashing the kernel.
Mike Kravetz [Tue, 18 Oct 2022 02:49:45 +0000 (19:49 -0700)]
mm/mmap: undo ->mmap() when mas_preallocate() fails
A memory leak in hugetlb_reserve_pages was reported in [1]. The root
cause was traced to an error path in mmap_region when mas_preallocate()
fails. In this case, the vma is freed after a successful call to
filesystem specific mmap. The hugetlbfs mmap routine may allocate data
structures pointed to by m_private_data. These need to be cleaned up by
the hugetlb vm_ops->close() routine.
The same issue was addressed by commit e8e2cf37762d ("mm/mmap: undo
->mmap() when arch_validate_flags() fails") for the arch_validate_flags()
test. Go to the same close_and_free_vma label if mas_preallocate() fails.
Joseph Qi [Mon, 17 Oct 2022 13:02:27 +0000 (21:02 +0800)]
ocfs2: clear dinode links count in case of error
In ocfs2_mknod(), if error occurs after dinode successfully allocated,
ocfs2 i_links_count will not be 0.
So even though we clear inode i_nlink before iput in error handling, it
still won't wipe inode since we'll refresh inode from dinode during inode
lock. So just like clear inode i_nlink, we clear ocfs2 i_links_count as
well. Also do the same change for ocfs2_symlink().
Link: https://lkml.kernel.org/r/20221017130227.234480-2-joseph.qi@linux.alibaba.com Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Yan Wang <wangyan122@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joseph Qi [Mon, 17 Oct 2022 13:02:26 +0000 (21:02 +0800)]
ocfs2: fix BUG when iput after ocfs2_mknod fails
Commit f19fba12ad86 "ocfs2: should reclaim the inode if
'__ocfs2_mknod_locked' returns an error" tried to reclaim the claimed
inode if __ocfs2_mknod_locked() fails later. But this introduce a race,
the freed bit may be reused immediately by another thread, which will
update dinode, e.g. i_generation. Then iput this inode will lead to BUG:
inode->i_generation != le32_to_cpu(fe->i_generation)
We could make this inode as bad, but we did want to do operations like
wipe in some cases. Since the claimed inode bit can only affect that an
dinode is missing and will return back after fsck, it seems not a big
problem. So just leave it as is by revert the reclaim logic.
Link: https://lkml.kernel.org/r/20221017130227.234480-1-joseph.qi@linux.alibaba.com Fixes: f19fba12ad86 ("ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Yan Wang <wangyan122@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Martin Liska [Thu, 13 Oct 2022 07:40:59 +0000 (09:40 +0200)]
gcov: support GCC 12.1 and newer compilers
Starting with GCC 12.1, the created .gcda format can't be read by gcov
tool. There are 2 significant changes to the .gcda file format that
need to be supported:
Tested with GCC 7.5, 10.4, 12.2 and the current master.
Link: https://lkml.kernel.org/r/624bda92-f307-30e9-9aaa-8cc678b2dfb2@suse.cz Signed-off-by: Martin Liska <mliska@suse.cz> Tested-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Inside the zs_destroy_pool() function, there can still be NULL size_class
pointers: if when the next size_class is allocated, inside
zs_create_pool() function, kzalloc will return NULL and handling the error
condition, zs_create_pool() will call zs_destroy_pool().
Liam Howlett [Sat, 15 Oct 2022 02:12:33 +0000 (02:12 +0000)]
mm/mempolicy: fix mbind_range() arguments to vma_merge()
Fuzzing produced an invalid argument to vma_merge() which was caught by
the newly added verification of the number of VMAs being removed on
process exit. Analyzing the failure eventually resulted in finding an
issue with the search of a VMA that started at address 0, which caused an
underflow and thus the loss of many VMAs being tracked in the tree. Fix
the underflow by changing the search of the maple tree to use the start
address directly.
Dan Carpenter [Wed, 12 Oct 2022 13:19:39 +0000 (16:19 +0300)]
mailmap: update Dan Carpenter's email address
My time at Oracle is ending at the end of the month. Update my email
address accordingly.
Link: https://lkml.kernel.org/r/Y0a+6+5SHMdvUnpg@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Sun, 16 Oct 2022 22:27:07 +0000 (15:27 -0700)]
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Linus Torvalds [Sun, 16 Oct 2022 22:14:29 +0000 (15:14 -0700)]
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
Linus Torvalds [Sun, 16 Oct 2022 18:12:22 +0000 (11:12 -0700)]
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
Linus Torvalds [Sun, 16 Oct 2022 18:08:19 +0000 (11:08 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
Linus Torvalds [Sun, 16 Oct 2022 18:01:40 +0000 (11:01 -0700)]
Merge tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
Tetsuo Handa [Sat, 15 Oct 2022 15:53:51 +0000 (00:53 +0900)]
Revert "cpumask: fix checking valid cpu range".
This reverts commit b55d5df4cb41 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit b55d5df4cb41 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Masahiro Yamada [Fri, 14 Oct 2022 20:18:11 +0000 (05:18 +0900)]
kbuild: fix single directory build
Commit a9d3bdc81687 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: a9d3bdc81687 ("kbuild: refactor single builds of *.ko") Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 16 Oct 2022 00:05:07 +0000 (17:05 -0700)]
Merge tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
Linus Torvalds [Sat, 15 Oct 2022 23:47:33 +0000 (16:47 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
Linus Torvalds [Sat, 15 Oct 2022 23:36:38 +0000 (16:36 -0700)]
Merge tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
Hyeonggon Yoo [Sat, 15 Oct 2022 04:34:29 +0000 (13:34 +0900)]
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
After commit 710bdf2b63c5 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Steve French [Sat, 15 Oct 2022 05:43:22 +0000 (00:43 -0500)]
smb3: improve SMB3 change notification support
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
Steve French [Sat, 15 Oct 2022 01:00:32 +0000 (20:00 -0500)]
cifs: lease key is uninitialized in two additional functions when smb1
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 00:18:32 +0000 (19:18 -0500)]
cifs: lease key is uninitialized in smb1 paths
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 14 Oct 2022 20:14:54 +0000 (17:14 -0300)]
cifs: fix double-fault crash during ntlmssp
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes: 51865fc04b82 ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
56b23af7a6d9304a ("x86/apic: Don't disable x2APIC if locked") 78a2b25c4f019aac ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch only add basic parsing support according to the definition of
the PTT packet described in Documentation/trace/hisi-ptt.rst. And the
fields of each packet can be further decoded following the PCIe Spec's
definition of TLP packet.
Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 6 Oct 2022 15:51:49 +0000 (21:21 +0530)]
perf tests stat+json_output: Include sanity check for topology
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 7ade92144c9f7723 ("perf test: JSON format checking") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 6 Oct 2022 15:51:48 +0000 (21:21 +0530)]
perf tests stat+csv_output: Include sanity check for topology
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: a4cfa1c145dd6e2f ("perf test: Add checking for perf stat CSV output.") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 12 Oct 2022 08:22:59 +0000 (11:22 +0300)]
perf intel-pt: Fix system_wide dummy event for hybrid
User space tasks can migrate between CPUs, so when tracing selected CPUs,
system-wide sideband is still needed, however evlist->core.has_user_cpus
is not set in the hybrid case, so check the target cpu_list instead.
Fixes: 4788bef75c531450 ("perf intel-pt: Track sideband system-wide when needed") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 12 Oct 2022 08:22:58 +0000 (11:22 +0300)]
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 3ea2f9522652918a ("perf tools: Pass Intel PT information for decoding MTC and CYC") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Wed, 12 Oct 2022 09:46:32 +0000 (10:46 +0100)]
perf test: Fix attr tests for PERF_FORMAT_LOST
Since PERF_FORMAT_LOST was added, the default read format has that bit
set, so add it to the tests. Keep the old value as well so that the test
still passes on older kernels.
This fixes the following failure:
expected read_format=0|4, got 20
FAILED './tests/attr/test-record-C0' - match failure
Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ammy Yi [Fri, 14 Oct 2022 17:09:05 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Add 9 tests
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:04 +0000 (20:09 +0300)]
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
When a program header was added, it moved the text section but
GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
Fixes: c3a9798ad5e3f30a ("perf jit: Include program header in ELF files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lieven Hey <lieven.hey@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:03 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Add jitdump test
Add a test for decoding self-modifying code using a jitdump file.
The test creates a workload that uses self-modifying code and generates its
own jitdump file. The result is processed with perf inject --jit and
checked for decoding errors.
Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET
for jit" applied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:02 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Tidy some alignment
Tidy alignment of test function lines to make them more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:01 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
Messages display with the perf test -v option. Add a message to show when
skipping a test because the user cannot do kernel tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:00 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Tidy some perf record options
When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 15 Oct 2022 01:41:41 +0000 (18:41 -0700)]
Merge tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dan Williams:
"Some small cleanups and fixes in and around the nvdimm subsystem. The
most significant change is a regression fix for nvdimm namespace
(volume) creation when the namespace size is smaller than 2MB/
Summary:
- Fix nvdimm namespace creation on platforms that do not publish
associated 'DIMM' metadata for a persistent memory region.
- Miscellaneous fixes and cleanups"
* tag 'libnvdimm-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
ACPI: HMAT: Release platform device in case of platform_device_add_data() fails
dax: Remove usage of the deprecated ida_simple_xxx API
libnvdimm/region: Allow setting align attribute on regions without mappings
nvdimm/namespace: Fix comment typo
nvdimm: make __nvdimm_security_overwrite_query static
nvdimm/region: Fix kernel-doc
nvdimm/namespace: drop unneeded temporary variable in size_store()
nvdimm/namespace: return uuid_null only once in nd_dev_to_uuid()
Linus Torvalds [Sat, 15 Oct 2022 01:36:42 +0000 (18:36 -0700)]
Merge tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A great rework of the isl12022 driver makes up the bulk of the
changes. There is also an important fix for CMOS and then the usual
small fixes:
- switch to devm_clk_get_enabled() where relevant
- cmos: event handler registration fix
- isl12022: code improvements"
* tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rv3028: Fix codestyle errors
rtc: cmos: Fix event handler registration ordering issue
rtc: k3: Use devm_clk_get_enabled() helper
rtc: jz4740: Use devm_clk_get_enabled() helper
rtc: mpfs: Use devm_clk_get_enabled() helper
rtc: ds1685: Fix spelling of function name in comment block
rtc: isl12022: switch to using regmap API
rtc: isl12022: drop redundant write to HR register
rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()
rtc: isl12022: use %ptR
rtc: isl12022: simplify some expressions
rtc: isl12022: drop a dev_info()
rtc: isl12022: specify range_min and range_max
rtc: isl12022: stop using deprecated devm_rtc_device_register()
rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()
rtc: mxc: Use devm_clk_get_enabled() helper
rtc: gamecube: Always reset HW_SRNPROT after read
rtc: k3: detect SoC to determine erratum fix
rtc: k3: wait until the unlock field is not zero
rtc: mpfs: Remove printing of stray CR
Linus Torvalds [Sat, 15 Oct 2022 01:31:28 +0000 (18:31 -0700)]
Merge tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Not much this cycle, only two fixes for a rare event"
- fix device reattach issues"
* tag 'i3c/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Remove the wrong place of reattach.
i3c: master: Free the old_dyn_addr when reattach.
Linus Torvalds [Sat, 15 Oct 2022 01:23:23 +0000 (18:23 -0700)]
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
Linus Torvalds [Sat, 15 Oct 2022 01:14:48 +0000 (18:14 -0700)]
Merge tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Richard Weinberger:
- Move to strscpy()
- Improve panic notifiers
- Fix NR_CPUS usage
- Fixes for various comments
- Fixes for virtio driver
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
uml: Remove the initialization of statics to 0
um: Do not initialise statics to 0.
um: Fix comment typo
um: Improve panic notifiers consistency and ordering
um: remove unused reactivate_chan() declaration
um: mmaper: add __exit annotations to module exit funcs
um: virt-pci: add __init/__exit annotations to module init/exit funcs
hostfs: move from strlcpy with unused retval to strscpy
um: move from strlcpy with unused retval to strscpy
um: increase default virtual physical memory to 64 MiB
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
um: read multiple msg from virtio slave request fd
Linus Torvalds [Fri, 14 Oct 2022 20:47:42 +0000 (13:47 -0700)]
Merge tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"A last-minute arch/alpha regression fix: the previous asm-generic
branch contained a new regression from a typo"
* tag 'asm-generic-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: fix marvel_ioread8 build regression
Linus Torvalds [Fri, 14 Oct 2022 20:44:53 +0000 (13:44 -0700)]
Merge tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are three fixes for build warnings that came in during the merge
window"
* tag 'arm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: mmp: Make some symbols static
ARM: spear6xx: Staticize few definitions
clk: spear: Move prototype to accessible header
Stephen Boyd [Fri, 14 Oct 2022 20:44:44 +0000 (13:44 -0700)]
Merge branch 'clk-rate-range' into clk-next
- Various clk rate range fixes
- Drop clk rate range constraints on clk_put() (redux)
* clk-rate-range: (28 commits)
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
clk: tests: Add some tests for orphan with multiple parents
clk: tests: Add tests for mux with multiple parents
clk: tests: Add tests for single parent mux
...
Jon Hunter [Mon, 10 Oct 2022 10:00:46 +0000 (11:00 +0100)]
clk: tegra: Fix Tegra PWM parent clock
Commit efa4a7e19dd5 ("pwm: tegra: Optimize period calculation") updated
the period calculation in the Tegra PWM driver and now returns an error
if the period requested is less than minimum period supported. This is
breaking PWM support on various Tegra platforms. For example, on the
Tegra210 Jetson Nano platform this is breaking the PWM fan support and
probing the PWM fan driver now fails ...
pwm-fan pwm-fan: Failed to configure PWM: -22
pwm-fan: probe of pwm-fan failed with error -22
The problem is that the default parent clock for the PWM on Tegra210 is
a 32kHz clock and is unable to support the requested PWM period.
Fix PWM support on Tegra20, Tegra30, Tegra114, Tegra124 and Tegra210 by
updating the parent clock for the PWM to be the PLL_P.
Fixes: efa4a7e19dd5 ("pwm: tegra: Optimize period calculation") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20 Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # TF700T T3 Link: https://lore.kernel.org/r/20221010100046.6477-1-jonathanh@nvidia.com Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Walleij [Thu, 13 Oct 2022 14:07:45 +0000 (16:07 +0200)]
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
These two clocks are now registered in the device tree as fixed clocks,
causing a regression in the driver as the clock already exists with
e.g. the name "pxo_board" as the MSM8660 GCC driver probes.
Fix this by just not hard-coding this anymore and everything works
like a charm.
Since commit 3c0c969b9c03 ("clk: Stop forwarding clk_rate_requests
to the parent"), the clk_rate_request is .. as the title says, not
forwarded anymore to the parent: this produces an issue with the
MediaTek clock MUX driver during GPU DVFS on MT8195, but not on
MT8192 or others.
This is because, differently from others, like MT8192 where all of
the clocks in the MFG parents tree are of mtk_mux type, but in the
parent tree of MT8195's MFG clock, we have one mtk_mux clock and
one (clk framework generic) mux clock, like so:
To solve this issue and also keep the GPU DVFS clocks code working
as expected, wire up a .determine_rate() callback for the mtk_mux
ops; for that, the standard clk_mux_determine_rate_flags() was used
as it was possible to.
This commit was successfully tested on MT6795 Xperia M5, MT8173 Elm,
MT8192 Spherion and MT8195 Tomato; no regressions were seen.
For the sake of some more documentation about this issue here's the
trace of it:
The rule for generating human readable LLVM IR (.ll) is only useful as a
debugging feature:
$ make LLVM=1 fs/select.ll
As Fangrui notes:
A LLVM_ENABLE_ASSERTIONS=off build of Clang defaults to
-fdiscard-value-names.
A LLVM_ENABLE_ASSERTIONS=on build of Clang defaults to
-fno-discard-value-names.
Explicitly enable -fno-discard-value-names so that the IR always contains
value names regardless of whether assertions were enabled or not.
Assertions generally are not enabled in releases of clang packaged by
distributions.
Link: https://github.com/ClangBuiltLinux/linux/issues/1467 Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Fri, 14 Oct 2022 20:22:14 +0000 (13:22 -0700)]
Merge tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a few remaining patches for 6.1-rc1.
The major changes are the hibernation fixes for HD-audio CS35L41 codec
and the USB-audio small fixes against the last change. In addition, a
couple of HD-audio regression fixes and a couple of potential
mutex-deadlock fixes with OSS emulation in ALSA core side are seen"
* tag 'sound-fix-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: cs35l41: Support System Suspend
ALSA: hda: cs35l41: Remove suspend/resume hda hooks
ALSA: hda/cs_dsp_ctl: Fix mutex inversion when creating controls
ALSA: hda: hda_cs_dsp_ctl: Ensure pwr_lock is held before reading/writing controls
ALSA: hda: hda_cs_dsp_ctl: Minor clean and redundant code removal
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: hda/realtek: Add Intel Reference SSID to support headset keys
ALSA: hda/realtek: Add quirk for ASUS GV601R laptop
ALSA: hda/realtek: Correct pin configs for ASUS G533Z
ALSA: usb-audio: Avoid superfluous endpoint setup
ALSA: usb-audio: Correct the return code from snd_usb_endpoint_set_params()
ALSA: usb-audio: Apply mutex around snd_usb_endpoint_set_params()
ALSA: usb-audio: Avoid unnecessary interface change at EP close
ALSA: hda: Update register polling macros
ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530
Linus Torvalds [Fri, 14 Oct 2022 19:38:03 +0000 (12:38 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Cortex-A55 errata workaround (repeat TLBI)
- AMPERE1 added to the Spectre-BHB affected list
- MTE fix to avoid setting PG_mte_tagged if no tags have been touched
on a page
- Fixed typo in the SCTLR_EL1.SPINTMASK bit naming (the commit log has
other typos)
- perf: return value check in ali_drw_pmu_probe(),
ALIBABA_UNCORE_DRW_PMU dependency on ACPI
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add AMPERE1 to the Spectre-BHB affected list
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
MAINTAINERS: rectify file entry in ALIBABA PMU DRIVER
drivers/perf: ALIBABA_UNCORE_DRW_PMU should depend on ACPI
drivers/perf: fix return value check in ali_drw_pmu_probe()
arm64: errata: Add Cortex-A55 to the repeat tlbi list
arm64/sysreg: Fix typo in SCTR_EL1.SPINTMASK
Linus Torvalds [Fri, 14 Oct 2022 19:28:43 +0000 (12:28 -0700)]
Merge tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
Jonathan reported that this commit broke this topology, where all the space
available on bus 02 was assigned to the 02:00.0 bridge window, leaving none
for the e1000 device at 02:00.1:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Linus Torvalds [Fri, 14 Oct 2022 19:10:01 +0000 (12:10 -0700)]
Merge tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Fixes:
- When we added basic vDSO support in kernel 5.18 we introduced a bug
which prevented a mmap() of graphic card memory. This is because we
used the DMB (data memory break trap bit) page flag as special-bit,
but missed to clear that bit when loading the TLB.
- Graphics card memory size was not correctly aligned
- Spelling fixes (from Colin Ian King)
Enhancements:
- PDC console (which uses firmware calls) now rewritten as early
console
- Reduced size of alternative tables"
* tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver
parisc: Fix userspace graphics card breakage due to pgtable special bit
parisc: fbdev/stifb: Align graphics memory size to 4MB
parisc: Convert PDC console to an early console
parisc: Reduce kernel size by packing alternative tables
Linus Torvalds [Fri, 14 Oct 2022 18:36:05 +0000 (11:36 -0700)]
Merge tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Generate a change uevent on unsolicited device end I/O interrupt for
z/VM unit record devices supported by the vmur driver. This event can
be used to automatically trigger processing of files as they arrive
in the z/VM reader.
* tag 's390-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmur: generate uevent on unsolicited device end
s390/vmur: remove unnecessary BUG statement
Linus Torvalds [Fri, 14 Oct 2022 18:21:11 +0000 (11:21 -0700)]
Merge tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- DT updates for the PolarFire SOC
- a fix to correct the handling of write-only mappings
- m{vetndor,arcd,imp}id is now in /proc/cpuinfo
- the SiFive L2 cache controller support has been refactored to also
support L3 caches
- misc fixes, cleanups and improvements throughout the tree
* tag 'riscv-for-linus-6.1-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
MAINTAINERS: add RISC-V's patchwork
RISC-V: Make port I/O string accessors actually work
riscv: enable software resend of irqs
RISC-V: Re-enable counter access from userspace
riscv: vdso: fix NULL deference in vdso_join_timens() when vfork
riscv: Add cache information in AUX vector
soc: sifive: ccache: define the macro for the register shifts
soc: sifive: ccache: use pr_fmt() to remove CCACHE: prefixes
soc: sifive: ccache: reduce printing on init
soc: sifive: ccache: determine the cache level from dts
soc: sifive: ccache: Rename SiFive L2 cache to Composable cache.
dt-bindings: sifive-ccache: change Sifive L2 cache to Composable cache
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
riscv: Pass -mno-relax only on lld < 15.0.0
RISC-V: Avoid dereferening NULL regs in die()
dt-bindings: riscv: add new riscv,isa strings for emulators
...
Linus Torvalds [Fri, 14 Oct 2022 18:16:18 +0000 (11:16 -0700)]
Merge tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix 32-bit syscall wrappers with 64-bit arguments of unaligned
register-pairs. Notably this broke ftruncate64 & pread/write64, which
can lead to file corruption.
- Fix lost interrupts when returning to soft-masked context on 64-bit.
- Fix build failure when CONFIG_DTL=n.
Thanks to Nicholas Piggin, Jason A. Donenfeld, Guenter Roeck, Arnd
Bergmann, and Sachin Sant.
* tag 'powerpc-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Fix CONFIG_DTL=n build
powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context
powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs
drm/amd/display: Fix build breakage with CONFIG_DEBUG_FS=n
After commit ea6e492882d2 ("drm/amd/display: Fix vblank refcount in vrr
transition"), a build with CONFIG_DEBUG_FS=n is broken due to a
misplaced brace, along the lines of:
In file included from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_trace.h:39,
from drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:41:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c: At top level:
./include/drm/drm_atomic.h:864:9: error: expected identifier or ‘(’ before ‘for’
864 | for ((__i) = 0; \
| ^~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8317:9: note: in expansion of macro ‘for_each_new_crtc_in_state’
8317 | for_each_new_crtc_in_state(state, crtc, new_crtc_state, j)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Move the brace within the #ifdef so that the file can be built with or
without CONFIG_DEBUG_FS.
projects / kernel.git / log