Takashi Iwai [Wed, 14 Aug 2019 16:27:08 +0000 (18:27 +0200)]
ALSA: hda: Drop export of snd_hdac_bus_add/remove_device()
snd_hdac_bus_add_device() and snd_hdac_remove_device() are called only
internally in hda-core. Let's drop the exports of them and move the
declarations into local.h.
Takashi Iwai [Tue, 13 Aug 2019 15:25:39 +0000 (17:25 +0200)]
ALSA: hda: Add codec on bus address table lately
The call of snd_hdac_bus_add_device() is needed only for registering
the codec onto the bus caddr_tbl[] that is referred essentially only
in the unsol event handler. That is, the reason of this call and the
release by the counter-part function snd_hdac_bus_remove_device() is
just to assure that the unsol event gets notified to the codec.
But the current implementation of the unsol notification wouldn't work
properly when the codec is still in a premature init state. So this
patch tries to work around it by delaying the caddr_tbl[] registration
at the point of snd_hdac_device_register().
Also, the order of snd_hdac_bus_remove_device() and device_del() calls
are shuffled to make sure that the unsol event is masked before
deleting the device.
Takashi Iwai [Tue, 13 Aug 2019 15:11:28 +0000 (17:11 +0200)]
ALSA: hda - Drop unsol event handler for Intel HDMI codecs
We don't need to deal with the unsol events for Intel chips that are
tied with the graphics via audio component notifier. Although the
presence of the audio component is checked at the beginning of
hdmi_unsol_event(), better to short cut by dropping unsol_event ops.
Takashi Iwai [Mon, 12 Aug 2019 16:01:47 +0000 (18:01 +0200)]
ALSA: hda: Set fifo_size for both playback and capture streams
Currently we set hdac_stream.fifo_size field only for the playback
stream by some odd reason I forgot, while this field isn't referred in
any places. Actually this fifo_size field would have been required in
the position report correction for VIA chipset, but due to the lack of
the fifo_size set for capture streams, snd-hda-intel driver fetches
the register by itself.
This patch straightens and simplifies the code by setting the
fifo_size field for both playback and capture streams, and use it in
the HD-audio controller driver.
Tomas Espeleta [Fri, 9 Aug 2019 14:37:54 +0000 (16:37 +0200)]
ALSA: hda - Add a quirk model for fixing Huawei Matebook X right speaker
[ This is rather a revival of the patch Tomas sent in months ago, but
applying only with the quirk model option -- tiwai ]
Hard coded coefficients to make Huawuei Matebook X right speaker
work. The Matebook X has a ALC298, please refer to bug 197801 on
how these numbers were reverse engineered from the Windows driver
The reversed engineered sequence represents a repeating pattern
of verbs, and the only values that are changing periodically are
written on indexes 0x23 and 0x25:
* skipped reading sequences (0x500 - 0xc00 sequences are ignored)
* static values from reverse engineering are used
NOTE: since a significant risk is still considered, this is provided
as an experimental fix that isn't applied as default for now. For
enabling the fix, you'll have to choose huawei-mbx-stereo via model
option of snd-hda-intel module.
If we get feedback from users that this works stably, we may apply it
per default.
[ Some coding style fixes and replacement with AC_VERB_* by tiwai ]
Takashi Iwai [Fri, 9 Aug 2019 14:13:16 +0000 (16:13 +0200)]
ALSA: hda - Inform too slow responses
For the sake of debugging, show each response that took too long time
and its corresponding last verb. Since such an error happens in
series once when started, use the ratelimited variant for suppressing
the flood.
YueHaibing [Fri, 9 Aug 2019 11:01:00 +0000 (19:01 +0800)]
ASoC: SOF: Intel: Add missing include file hdac_hda.h
Building with SND_SOC_SOF_HDA_AUDIO_CODEC fails:
sound/soc/sof/intel/hda-bus.c: In function sof_hda_bus_init:
sound/soc/sof/intel/hda-bus.c:16:25: error: implicit declaration of function
snd_soc_hdac_hda_get_ops; did you mean snd_soc_jack_add_gpiods? [-Werror=implicit-function-declaration]
#define sof_hda_ext_ops snd_soc_hdac_hda_get_ops()
Takashi Iwai [Wed, 7 Aug 2019 18:50:50 +0000 (20:50 +0200)]
ASoC: SOF: Intel: Initialize hdaudio bus properly
The SOF HD-audio bus has its house-made initialization code. It's
supposedly for making the code independent from HD-audio bus drivers.
However, this is error-prone, and above all, the SOF driver has
already dependency on HD-audio bus driver when CONFIG_SND_SOF_HDA is
set. That is, if this Kconfig is set, there is no reason to avoid the
call to the proper bus init function.
Also, the ext_ops that is set at bus initialization can be better
handled inside sof_hda_bus_init(). We don't need to refer this
outside the bus initialization.
So this patch addresses these issues:
- sof_hda_bus_init() calls nothing but snd_hdac_ext_bus_init()
when CONFIG_SND_SOF_HDA is set. Otherwise some fields are
initialized locally like before for avoiding the dependency.
- ext_ops is referred inside sof_hda_bus_init(). The ext_ops argument
of snd_hda_bus_init() is dropped.
Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 7 Aug 2019 18:32:08 +0000 (20:32 +0200)]
ALSA: hda: Direct MMIO accesses
HD-audio drivers access to the mmio registers indirectly via the
corresponding bus->io_ops callbacks. This is because some platform
(notably Tegra SoC) requires the word-aligned access. But it's rather
a rare case, and other platforms suffer from the penalties by indirect
calls unnecessarily.
This patch is an attempt to optimize and cleanup for this situation.
Now the special aligned access is used only when a new kconfig
CONFIG_SND_HDA_ALIGNED_MMIO is set. And the HD-audio core itself
provides the aligned MMIO access helpers instead of the driver side.
If Kconfig isn't set (as default), the standard helpers like readl()
or writel() are used directly.
A couple of places in ASoC Intel drivers have the access via io_ops
reg_writel(), and they are replaced with the direct writel() calls.
And now with this patch, the whole bus->io_ops becomes empty, so it's
dropped completely. The bus initialization functions are changed
accordingly as well to drop the whole bus->io_ops.
Takashi Iwai [Wed, 7 Aug 2019 18:02:31 +0000 (20:02 +0200)]
ALSA: hda: Remove page allocation redirection
The HD-audio core allocates and releases pages via driver's specific
dma_alloc_pages and dma_free_pages ops defined in bus->io_ops. This
was because some platforms require the uncached pages and the handling
of page flags had to be done locally in the driver code.
Since the recent change in ALSA core memory allocator, we can simply
pass SNDRV_DMA_TYPE_DEV_UC for the uncached pages, and the only
difference became about this type to be passed to the core allocator.
That is, it's good time for cleaning up the mess.
This patch changes the allocation code in HD-audio core to call the
core allocator directly so that we get rid of dma_alloc_pages and
dma_free_pages io_ops. If a driver needs the uncached pages, it has
to set bus->dma_type right after the bus initialization.
This is merely a code refactoring and shouldn't bring any behavior
changes.
Ard van Breemen [Fri, 2 Aug 2019 11:52:15 +0000 (13:52 +0200)]
ALSA: usb-audio: Add Pioneer DDJ-SX3 PCM quirck
The Pioneer DDJ-SX3 is a plain 12 32bit channel out and 10 channel in
PCM/midi controller. The PCM part is "vendor specific".
It needs the "ignore invalid bsynchaddress" patch as it uses 0 for that.
Signed-off-by: Ard van Breemen <ard@kwaak.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ard van Breemen [Fri, 2 Aug 2019 11:52:14 +0000 (13:52 +0200)]
ALSA: usb-audio: Skip bSynchAddress endpoint check if it is invalid
The Linux kernel assumes that get_endpoint(alts,0) and
get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that
assumption. But if the bsyncaddress is 0 (invalid), it will flag that as
a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.
Signed-off-by: Ard van Breemen <ard@kwaak.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Alexander Tsoy [Thu, 10 Aug 2017 23:36:14 +0000 (02:36 +0300)]
ALSA: usb-audio: fix PCM device order
Some cards have alternate setting with non-PCM format as the first
altsetting in the interface descriptors. This confuses userspace, since
alsa-lib uses device 0 by default. So lets parse interfaces in two steps:
1. Parse altsettings with PCM formats.
2. Parse altsettings with non-PCM formats.
This fixes at least following cards:
- Audinst HUD-mx2
- Audinst HUD-mini
[ Adapted to 5.3 kernel by tiwai ]
Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Wenwen Wang [Tue, 6 Aug 2019 07:00:27 +0000 (03:00 -0400)]
ALSA: usb-audio: fix a memory leak bug
In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is
allocated through kzalloc() before the execution goto 'found_clock'.
However, this structure is not deallocated if the memory allocation for
'pd' fails, leading to a memory leak bug.
To fix the above issue, free 'fp->chmap' before returning NULL.
Fixes: 9a8eb0804727 ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 6 Aug 2019 10:28:08 +0000 (12:28 +0200)]
Merge tag 'asoc-fix-v5.3-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.3
A relatively large batch of mostly unremarkable fixes here, a couple of
small core fixes for fairly obscure issues, more comment/email updates
with no code impact than usual and a bunch of small driver fixes.
The support for new sample rates in the max98373 driver is a fix for the
fact that the driver declared support for those rates but would in fact
return an error if these rates were selected.
ALSA: firewire-lib: add a kernel API to stop a couple of AMDTP streams in AMDTP domain
This commit adds a kernel API to stop a couple of isochronous contexts
for AMDTP streams. The API is not protected with any lock primitive.
Callers should use this with enough lock against concurrent access.
ASoC: amd: acp3x: use dma address for acp3x dma driver
We shouldn't assume CPU physical address we get from page_to_phys()
is same as DMA address we get from dma_alloc_coherent(). On x86_64,
we won't run into any problem with the assumption when dma_ops is
nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled.
And it's most likely different from CPU physical address when AMD
IOMMU is not in passthrough mode.
This patch fixes page faults when IOMMU is enabled.
ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver
AMD platform device acp3x_rv_i2s created by parent PCI device
driver. Pass struct device of the parent to
snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use
correct dma_ops. Otherwise, it will use default dma_ops which
is nommu_dma_ops on x86_64 even when IOMMU is enabled and
set to non passthrough mode.
Colin Ian King [Thu, 1 Aug 2019 16:28:24 +0000 (17:28 +0100)]
ALSA: isa/wavefront: remove redundant assignment to pointer bptr
The pointer bptr is being assigned a value that is never read
and it is being updated in the next statement with a new value.
The initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda/intel: stop probe if DMICS are detected on Skylake+ platforms
The legacy HD-Audio driver cannot handle Skylake+ platforms with
digital microphones. For those platforms, the SOF or SST drivers need
to be used.
This patch provides an automatic way of detecting the presence of
DMICs using NHTL information reported by the BIOS. A kernel kconfig
option or a kernel module parameter provide an opt-in means of
stopping the probe. The kernel would then look for an alternate driver
registered for the same PCI ID to probe.
With this capability, distros no longer have to blacklist
snd-hda-intel, but still need to make sure the SOF/SST drivers are
functional by providing the relevant firmware and topology files in
/lib/firmware/intel
The coexistence between SOF and SST drivers and their dynamic
detection is not addressed by this patch, different mechanisms need to
be used, e.g. DMI-based quirks.
Move parts of the code outside of the Skylake driver to help detect
the presence of DMICs (which are not supported by the HDaudio legacy
driver).
No functionality change (except for the removal of useless OR
operations), only indentation and checkpatch fixes, making sure
that the code compiles without ACPI and fixing an ACPI leak
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc64):
sound/sparc/dbri.c: In function ‘reverse_bytes’:
sound/sparc/dbri.c:582:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xffff0000) >> 16) | ((b & 0x0000ffff) << 16);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:583:2: note: here
case 16:
^~~~
sound/sparc/dbri.c:584:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xff00ff00) >> 8) | ((b & 0x00ff00ff) << 8);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:585:2: note: here
case 8:
^~~~
sound/sparc/dbri.c:586:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xf0f0f0f0) >> 4) | ((b & 0x0f0f0f0f) << 4);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:587:2: note: here
case 4:
^~~~
sound/sparc/dbri.c:588:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xcccccccc) >> 2) | ((b & 0x33333333) << 2);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:589:2: note: here
case 2:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Johannes Berg [Mon, 29 Jul 2019 07:14:22 +0000 (09:14 +0200)]
ALSA: aoa: onyx: always initialize register read value
A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.
Fixes: 3f4ff7c5f2ad ("[ALSA] snd-aoa: add snd-aoa") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add mixer quirk for the Focusrite Scarlett 6i6, 18i8, and 18i20 Gen 2
audio interfaces. Although the interfaces are USB compliant,
additional input/output level controls and hardware routing/mixing
functionality are available using proprietary USB requests.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Samuel Thibault [Fri, 26 Jul 2019 21:47:02 +0000 (23:47 +0200)]
ALSA: hda: Fix 1-minute detection delay when i915 module is not available
Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically. Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507
In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.
This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).
Jia-Ju Bai [Fri, 26 Jul 2019 02:14:42 +0000 (10:14 +0800)]
ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls()
In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
if (! ak->adc_info ||
! ak->adc_info[mixer_ch].switch_name)
When ak->adc_info is NULL, it is used on line 792:
knew.name = ak->adc_info[mixer_ch].selector_name;
Thus, a possible null-pointer dereference may occur.
To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.
This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda - Show the fatal CORB/RIRB error more clearly
The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up. Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.
Also, show the bus-reset fallback also as an error, too.
The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.
Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.
With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.
Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).
explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.
Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.
When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.
In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.
This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.
Hui Wang [Thu, 25 Jul 2019 06:57:37 +0000 (14:57 +0800)]
ALSA: hda - Add a conexant codec entry to let mute led work
This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.
Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips
It turned out that the recent Intel HD-audio controller chips show a
significant stall during the system PM resume intermittently. It
doesn't happen so often and usually it may read back successfully
after one or more seconds, but in some rare worst cases the driver
went into fallback mode.
After trial-and-error, we found out that the communication stall seems
covered by issuing the sync after each verb write, as already done for
AMD and other chipsets. So this patch enables the write-sync flag for
the recent Intel chips, Skylake and onward, as a workaround.
Also, since Broxton and co have the very same driver flags as Skylake,
refer to the Skylake driver flags instead of defining the same
contents again for simplification.
ASoC: Fail card instantiation if DAI format setup fails
If the DAI format setup fails, there is no valid communication format
between CPU and CODEC, so fail card instantiation, rather than continue
with a card that will most likely not function properly.
Downgrade "nothing to do in IRQ thread" message from error to a debug
message in the IPC interrupt handler thread.
The spurious wake-up can happen if a HDA stream interrupt is
raised while the IPC interrupt thread is running. IPC functionality
is not impacted by this condition, so debug is a more appropriate
trace level.
Stephan Gerhold [Mon, 22 Jul 2019 13:03:52 +0000 (15:03 +0200)]
ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links
apq8016_sbc_parse_of() sets up multiple DAI links, depending on the
number of nodes in the device tree. However, at the moment
CPU and platform components are only allocated for the first link.
This causes an oops when more than one link is defined:
Move the allocation inside the loop to ensure that each link is
properly initialized.
Fixes: 0a3816483628 ("ASoC: qcom: apq8016_sbc: use modern dai_link style") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Mon, 22 Jul 2019 09:24:36 +0000 (10:24 +0100)]
ALSA: compress: Be more restrictive about when a drain is allowed
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.
Charles Keepax [Mon, 22 Jul 2019 09:24:35 +0000 (10:24 +0100)]
ALSA: compress: Don't allow paritial drain operations on capture streams
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.
Charles Keepax [Mon, 22 Jul 2019 09:24:34 +0000 (10:24 +0100)]
ALSA: compress: Prevent bypasses of set_params
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.
Charles Keepax [Mon, 22 Jul 2019 09:24:33 +0000 (10:24 +0100)]
ALSA: compress: Fix regression on compressed capture streams
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Wenwen Wang [Mon, 22 Jul 2019 13:57:44 +0000 (08:57 -0500)]
ASoC: dapm: fix a memory leak bug
In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in
dapm_cnew_widget() to hold the new dapm widget. Then, different actions are
taken according to the id of the widget, i.e., 'w->id'. If any failure
occurs during this process, snd_soc_dapm_new_control_unlocked() should be
terminated by going to the 'request_failed' label. However, the allocated
kernel buffer is not freed on this code path, leading to a memory leak bug.
To fix the above issue, free the buffer before returning from
snd_soc_dapm_new_control_unlocked() through the 'request_failed' label.
ALSA: firewire-lib: pass packet descriptor to data block processing layer
This commit changes signature of callback function to call data block
processing layer with packet descriptor. At present, the layer is called
per packet.
ALSA: firewire-lib: add syt_override member for some protocols
Some protocols don't use syt field of CIP header to represent
presentation timestamp. For such protocol, ALSA IEC 61883-1/6
packet streaming engine uses a pointer into local variable for
the value of syt to call data block processing layer. However,
it can decide the value when initializing packet streaming
layer.
This commit adds 'syt_override' member for packet streaming
layer.
ALSA: firewire-lib: operate data block counter in top level of processing for IR context
In ALSA IEC 61883-1/6 packet streaming engine, two types of data block
counter are supported. This commit applies code refactoring to make it
explicitly for IR context.
projects / kernel.git / log