Eric Biggers [Thu, 26 May 2022 04:04:12 +0000 (21:04 -0700)]
ext4: fix up test_dummy_encryption handling for new mount API
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Jan Kara [Fri, 20 May 2022 11:14:02 +0000 (13:14 +0200)]
ext4: improve write performance with disabled delalloc
When delayed allocation is disabled (either through mount option or
because we are running low on free space), ext4_write_begin() allocates
blocks with EXT4_GET_BLOCKS_IO_CREATE_EXT flag. With this flag extent
merging is disabled and since ext4_write_begin() is called for each page
separately, we end up with a *lot* of 1 block extents in the extent tree
and following writeback is writing 1 block at a time which results in
very poor write throughput (4 MB/s instead of 200 MB/s). These days when
ext4_get_block_unwritten() is used only by ext4_write_begin(),
ext4_page_mkwrite() and inline data conversion, we can safely allow
extent merging to happen from these paths since following writeback will
happen on different boundaries anyway. So use
EXT4_GET_BLOCKS_CREATE_UNRIT_EXT instead which restores the performance.
Zhang Yi [Fri, 20 May 2022 02:32:16 +0000 (10:32 +0800)]
ext4: fix warning when submitting superblock in ext4_commit_super()
We have already check the io_error and uptodate flag before submitting
the superblock buffer, and re-set the uptodate flag if it has been
failed to write out. But it was lockless and could be raced by another
ext4_commit_super(), and finally trigger '!uptodate' WARNING when
marking buffer dirty. Fix it by submit buffer directly.
Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com> Link: https://lore.kernel.org/r/20220520023216.3065073-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add the description of @folio and remove @page in function kernel-doc
comment to remove warnings found by running scripts/kernel-doc, which
is caused by using 'make W=1'.
fs/jbd2/transaction.c:2149: warning: Function parameter or member
'folio' not described in 'jbd2_journal_try_to_free_buffers'
fs/jbd2/transaction.c:2149: warning: Excess function parameter 'page'
description in 'jbd2_journal_try_to_free_buffers'
Linus Torvalds [Sun, 12 Jun 2022 18:33:42 +0000 (11:33 -0700)]
Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix hp-wmi regression on HP Omen laptops introduced in 5.18
- Several hardware-id additions
- A couple of other tiny fixes"
* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: hid: Add Surface Go to VGBS allow list
platform/x86: hp-wmi: Use zero insize parameter only when supported
platform/x86: hp-wmi: Resolve WMI query failures on some devices
platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
platform/x86: barco-p50-gpio: Add check for platform_driver_register
platform/x86/intel: pmc: Support Intel Raptorlake P
platform/x86/intel: Fix pmt_crashlog array reference
platform/mellanox: Add static in struct declaration.
platform/mellanox: Spelling s/platfom/platform/
Linus Torvalds [Sun, 12 Jun 2022 18:16:00 +0000 (11:16 -0700)]
Merge tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Tetsuo's patch to trigger build warnings if system-wide wq's are
flushed along with a TP type update and trivial comment update"
* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Switch to new kerneldoc syntax for named variable macro argument
workqueue: Fix type of cpu in trace event
workqueue: Wrap flush_workqueue() using a macro
Linus Torvalds [Sun, 12 Jun 2022 18:10:07 +0000 (11:10 -0700)]
Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Make the *.mod build rule portable for POSIX awk
- Fix regression of 'make nsdeps'
- Make scripts/check-local-export working for older bash versions
- Fix scripts/gdb to extract the .config data from vmlinux
* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/gdb: change kernel config dumping method
scripts/check-local-export: avoid 'wait $!' for process substitution
scripts/nsdeps: adjust to the format change of *.mod files
kbuild: avoid regex RS for POSIX awk
Linus Torvalds [Sun, 12 Jun 2022 18:05:44 +0000 (11:05 -0700)]
Merge tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Three reconnect fixes, all for stable as well.
One of these three reconnect fixes does address a problem with
multichannel reconnect, but this does not include the additional
fix (still being tested) for dynamically detecting multichannel
adapter changes which will improve those reconnect scenarios even
more"
* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: populate empty hostnames for extra channels
cifs: return errors during session setup during reconnects
cifs: fix reconnect on smb3 mount types
Linus Torvalds [Sun, 12 Jun 2022 17:33:38 +0000 (10:33 -0700)]
Merge tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
Duke Lee [Tue, 7 Jun 2022 21:36:54 +0000 (14:36 -0700)]
platform/x86/intel: hid: Add Surface Go to VGBS allow list
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.
Bedant Patnaik [Wed, 8 Jun 2022 19:28:43 +0000 (00:58 +0530)]
platform/x86: hp-wmi: Use zero insize parameter only when supported
commit 760b1f3ec92c ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit f3041f2258c7 ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.
Fix this by using zero insize only if 0x5 error code is returned
Tested on Omen 15 AMD (2020) board ID: 8786.
Fixes: 760b1f3ec92c ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com> Tested-by: Jorge Lopez <jorge.lopez2@hp.com> Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jorge Lopez [Wed, 8 Jun 2022 21:29:23 +0000 (16:29 -0500)]
platform/x86: hp-wmi: Resolve WMI query failures on some devices
WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:
In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)
The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not. This particular
behavior occurs in older BIOS and reproduced in OMEN laptops. Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements. This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.
This patch was tested on several OMEN, Elite, and Zbooks. It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx. No problems were reported when testing on several Elite
and Zbooks notebooks.
Fixes: 8fa9296aee81 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated") Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Sat, 11 Jun 2022 23:56:41 +0000 (16:56 -0700)]
Merge tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A set of fixes. Most address the new warning we emit at build time
when irq chips are not immutable with some additional tweaks to
gpio-crystalcove from Andy and a small tweak to gpio-dwapd.
- make irq_chip structs immutable in several Diolan and intel drivers
to get rid of the new warning we emit when fiddling with irq chips
- don't print error messages on probe deferral in gpio-dwapb"
* tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: dwapb: Don't print error on -EPROBE_DEFER
gpio: dln2: make irq_chip immutable
gpio: sch: make irq_chip immutable
gpio: merrifield: make irq_chip immutable
gpio: wcove: make irq_chip immutable
gpio: crystalcove: Join function declarations and long lines
gpio: crystalcove: Use specific type and API for IRQ number
gpio: crystalcove: make irq_chip immutable
Linus Torvalds [Sat, 11 Jun 2022 23:50:39 +0000 (16:50 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Driver fixes and and one core patch.
Nine of the driver patches are minor fixes and reworks to lpfc and the
rest are trivial and minor fixes elsewhere"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pmcraid: Fix missing resource cleanup in error case
scsi: ipr: Fix missing/incorrect resource cleanup in error case
scsi: mpt3sas: Fix out-of-bounds compiler warning
scsi: lpfc: Update lpfc version to 14.2.0.4
scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds
scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted
scsi: lpfc: Address NULL pointer dereference after starget_to_rport()
scsi: lpfc: Resolve some cleanup issues following SLI path refactoring
scsi: lpfc: Resolve some cleanup issues following abort path refactoring
scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()
scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
scsi: sd: Fix interpretation of VPD B9h length
Linus Torvalds [Sat, 11 Jun 2022 23:32:47 +0000 (16:32 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place, most notably fixes for latent bugs in
drivers that got exposed by suppressing interrupts before DRIVER_OK,
which in turn has been done by 1f7e58d9bbc5 ("virtio: harden vring
IRQ")"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
um: virt-pci: set device ready in probe()
vdpa: make get_vq_group and set_group_asid optional
virtio: Fix all occurences of the "the the" typo
vduse: Fix NULL pointer dereference on sysfs access
vringh: Fix loop descriptors check in the indirect cases
vdpa/mlx5: clean up indenting in handle_ctrl_vlan()
vdpa/mlx5: fix error code for deleting vlan
virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
vdpa/mlx5: Fix syntax errors in comments
virtio-rng: make device ready before making request
Linus Torvalds [Sat, 11 Jun 2022 17:30:20 +0000 (10:30 -0700)]
iov_iter: fix build issue due to possible type mis-match
Commit c60809fae807 ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()")
introduced a problem on some 32-bit architectures (at least arm, xtensa,
csky,sparc and mips), that have a 'size_t' that is 'unsigned int'.
The reason is that we now do
min(nr * PAGE_SIZE - offset, maxsize);
where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is
'unsigned long'. As a result, the normal C type rules means that the
first argument to 'min()' ends up being 'unsigned long'.
In contrast, 'maxsize' is of type 'size_t'.
Now, 'size_t' and 'unsigned long' are always the same physical type in
the kernel, so you'd think this doesn't matter, and from an actual
arithmetic standpoint it doesn't.
But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if
it could also be 'unsigned long'. In that situation, both are unsigned
32-bit types, but they are not the *same* type.
And as a result 'min()' will complain about the distinct types (ignore
the "pointer types" part of the error message: that's an artifact of the
way we have made 'min()' check types for being the same):
lib/iov_iter.c: In function 'iter_xarray_get_pages':
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
lib/iov_iter.c:1464:16: note: in expansion of macro 'min'
1464 | return min(nr * PAGE_SIZE - offset, maxsize);
| ^~~
This was not visible on 64-bit architectures (where we always define
'size_t' to be 'unsigned long').
Force these cases to use 'min_t(size_t, x, y)' to make the type explicit
and avoid the issue.
[ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned
long' arithmetically. We've certainly historically seen environments
with 16-bit address spaces and 32-bit 'unsigned long'.
Similarly, even in 64-bit modern environments, 'size_t' could be its
own type distinct from 'unsigned long', even if it were arithmetically
identical.
So the above type commentary is only really descriptive of the kernel
environment, not some kind of universal truth for the kinds of wild
and crazy situations that are allowed by the C standard ]
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/ Cc: Jeff Layton <jlayton@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wireguard: selftests: use maximum cpu features and allow rng seeding
By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Call virtio_device_ready() to make this driver work after commit b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function. (The virtio core sets the device
ready when probe returns.)
Fixes: 1f7e58d9bbc5 ("virtio: harden vring IRQ") Fixes: 732559b790cd ("um: add PCI over virtio emulation driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Johannes Berg <johannes@sipsolutions.net>
Linus Torvalds [Sat, 11 Jun 2022 00:28:43 +0000 (17:28 -0700)]
Merge tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable changes:
- There is now a backup maintainer for NFSD
Notable fixes:
- Prevent array overruns in svc_rdma_build_writes()
- Prevent buffer overruns when encoding NFSv3 READDIR results
- Fix a potential UAF in nfsd_file_put()"
* tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Remove pointer type casts from xdr_get_next_encode_buffer()
SUNRPC: Clean up xdr_get_next_encode_buffer()
SUNRPC: Clean up xdr_commit_encode()
SUNRPC: Optimize xdr_reserve_space()
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
SUNRPC: Trap RDMA segment overflows
NFSD: Fix potential use-after-free in nfsd_file_put()
MAINTAINERS: reciprocal co-maintainership for file locking and nfsd
Shyam Prasad N [Mon, 6 Jun 2022 09:52:46 +0000 (09:52 +0000)]
cifs: populate empty hostnames for extra channels
Currently, the secondary channels of a multichannel session
also get hostname populated based on the info in primary channel.
However, this will end up with a wrong resolution of hostname to
IP address during reconnect.
This change fixes this by not populating hostname info for all
secondary channels.
Fixes: 175b0ba31bc0 ("cifs: populate server_hostname for extra channels") Cc: stable@vger.kernel.org Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Fri, 10 Jun 2022 23:32:49 +0000 (16:32 -0700)]
Merge tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's bioset initialization so that blk integrity pool is
properly setup. Remove now unused bioset_init_from_src.
- Fix DM zoned hang from locking imbalance due to needless check in
clone_endio().
* tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix zoned locking imbalance due to needless check in clone_endio
block: remove bioset_init_from_src
dm: fix bio_set allocation
Linus Torvalds [Fri, 10 Jun 2022 23:15:19 +0000 (16:15 -0700)]
Merge branch 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache cleanups from David Howells:
- fix checker complaint in afs
- two netfs cleanups:
- netfs_inode calling convention cleanup plus the requisite
documentation changes
- replace the ->cleanup op with a ->free_request op.
This is possible as the I/O request is now always available at
the cleanup point as the stuff to be cleaned up is no longer
passed into the API functions, but rather obtained by ->init_request.
* 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Rename the netfs_io_request cleanup op and give it an op pointer
netfs: Further cleanups after struct netfs_inode wrapper introduced
afs: Fix some checker issues
Jiasheng Jiang [Thu, 26 May 2022 09:03:45 +0000 (17:03 +0800)]
platform/x86: barco-p50-gpio: Add check for platform_driver_register
As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.
Fixes: 87634f639720 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cn Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The probe function pmt_crashlog_probe() may incorrectly reference
the 'priv->entry array' as it uses 'i' to reference the array instead
of 'priv->num_entries' as it should. This is similar to the problem
that was addressed in pmt_telemetry_probe via commit 26d3527a1091
("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic").
Cc: "David E. Box" <david.e.box@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: David Arcari <darcari@redhat.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220526203140.339120-1-darcari@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Michael Shych [Thu, 2 Jun 2022 14:51:03 +0000 (17:51 +0300)]
platform/mellanox: Add static in struct declaration.
Fix problem of missing static in struct declaration.
Fixes: d6a845788ceca ("platform/mellanox: Add support for new SN2201 system") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
David Howells [Thu, 9 Jun 2022 08:07:01 +0000 (09:07 +0100)]
iov_iter: Fix iter_xarray_get_pages{,_alloc}()
The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page. Various terms of the equation cancel out
and you end up with actual == offset. The same issue exists in
iter_xarray_get_pages_alloc().
Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.
This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it. Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.
Fixes: 8f7e74412f16 ("iov_iter: Add ITER_XARRAY") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
David Howells [Fri, 25 Feb 2022 11:19:14 +0000 (11:19 +0000)]
netfs: Rename the netfs_io_request cleanup op and give it an op pointer
The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).
So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Linus Torvalds [Thu, 9 Jun 2022 22:04:01 +0000 (15:04 -0700)]
netfs: Further cleanups after struct netfs_inode wrapper introduced
Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up. For
type safety, it's better not to do that (and it's less typing too).
Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer. Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.
netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.
Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Linus Torvalds [Fri, 10 Jun 2022 19:41:48 +0000 (12:41 -0700)]
Merge tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"Four folio-related fixes:
- Don't release a folio while it's still locked
- Fix a use-after-free after dropping the mmap_lock
- Fix a memory leak when splitting a page
- Fix a kernel-doc warning for struct folio"
* tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache:
mm: Add kernel-doc for folio->mlock_count
mm/huge_memory: Fix xarray node memory leak
filemap: Cache the value of vm_flags
filemap: Don't release a locked folio
Mike Snitzer [Fri, 10 Jun 2022 19:07:48 +0000 (15:07 -0400)]
dm: fix zoned locking imbalance due to needless check in clone_endio
After the commit 1056e4e0610f ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.
However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.
Fixes: 1056e4e0610f ("dm: pass NULL bdev to bio_alloc_clone") Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Linus Torvalds [Fri, 10 Jun 2022 18:49:27 +0000 (11:49 -0700)]
Merge tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an intel_idle issue introduced during the 5.16 development
cycle and two recent regressions in the system reboot/poweroff code.
Specifics:
- Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)
- Allow all platforms to use the global poweroff handler and make
non-syscall poweroff code paths work again (Dmitry Osipenko)"
* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.
The binding commit 1f730f0d6a31 ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit 480b1be91d0d ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.
Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.
Rob Herring [Mon, 6 Jun 2022 21:22:39 +0000 (16:22 -0500)]
dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries
There's no reason to list the same value twice in an 'enum'. This was fixed
treewide in commit f03db29f7807 ("dt-bindings: Fix 'enum' lists with
duplicate entries"), but this one got added in the merge window.
Linus Torvalds [Fri, 10 Jun 2022 18:14:47 +0000 (11:14 -0700)]
Merge tag 'docs-5.19-3' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.19, including moving the new HTE docs
to a more suitable location, adding loongarch to the features lists,
and a couple of typo fixes"
* tag 'docs-5.19-3' of git://git.lwn.net/linux:
docs: arm: tcm: Fix typo in description of TCM and MMU usage
docs: Move the HTE documentation to driver-api/
docs: usb: fix literal block marker in usbmon verification example
Documentation/features: Update the arch support status files
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
Linus Torvalds [Fri, 10 Jun 2022 17:56:28 +0000 (10:56 -0700)]
Merge tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix handling of the explicit-open mount option, and in particular the
conditions under which this option can be ignored.
- Fix a problem with zonefs iomap_begin method, causing a hang in
iomap_readahead() when a readahead request reaches the end of a file.
* tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix zonefs_iomap_begin() for reads
zonefs: Do not ignore explicit_open with active zone limit
zonefs: fix handling of explicit_open option on mount
Linus Torvalds [Fri, 10 Jun 2022 17:20:57 +0000 (10:20 -0700)]
Merge tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes; almost all changes are device-specific small
fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage,
so far"
* tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Add quirk for HP Dev One
ALSA: hda/realtek - Add HW8326 support
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
ASoC: es8328: Fix event generation for deemphasis control
ASoC: wm8962: Fix suspend while playing music
ASoC: SOF: ipc-msg-injector: Fix reversed if statement
ASoC: SOF: ipc-msg-injector: Propagate write errors correctly
ASoC: fsl_sai: Add support for i.MX8MN
ASoC: SOF: Fix potential NULL pointer dereference
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ASoC: cs42l51: Correct minimum value for SX volume control
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs35l36: Update digital volume TLV
ASoC: cs42l52: Fix TLV scales for mixer controls
...
Linus Torvalds [Fri, 10 Jun 2022 17:13:24 +0000 (10:13 -0700)]
Merge tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
then some misc panfrost, bridge/panel ones, and one ast fix for
multi-monitors. Probably pick up a bit more next week like rc3 often
does.
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix"
* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/ast: Support multiple outputs
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
drm/amdgpu: always flush the TLB on gfx8
drm/amdgpu: fix limiting AV1 to the first instance on VCN3
drm/amdkfd:Fix fw version for 10.3.6
drm/amdgpu: Add MODE register to wave debug info in gfx11
Revert "drm/amd/display: Pass the new context into disable OTG WA"
Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/amdgpu: suppress the compile warning about 64 bit type
drm/amd/pm: suppress compile warnings about possible unaligned accesses
drm/amdkfd: Fix partial migration bugs
drm/amdkfd: add pinned BOs to kfd_bo_list
drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
drm/amdgpu: enable tmz by default for GC 10.3.7
drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
drm/amdkfd: Use mmget_not_zero in MMU notifier
drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
...
Linus Torvalds [Fri, 10 Jun 2022 17:07:06 +0000 (10:07 -0700)]
Merge tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quick follow up, to cleanly fast-forward net again.
Current release - new code bugs:
- Revert "net/mlx5e: Allow relaxed ordering over VFs"
Previous releases - regressions:
- seg6: fix seg6_lookup_any_nexthop() to handle VRFs using
flowi_l3mdev
Misc:
- rename TLS_INFO_ZC_SENDFILE to better express the meaning"
* tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
nfp: flower: restructure flow-key for gre+vlan combination
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
Catalin Marinas [Fri, 10 Jun 2022 17:01:31 +0000 (18:01 +0100)]
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
This function is only called from assembly, no need for a prototype
declaration in a header file. In addition, add #ifdef around the
function since it is only used when CONFIG_KASAN_HW_TAGS.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: kernel test robot <lkp@intel.com>
Linus Torvalds [Fri, 10 Jun 2022 16:52:11 +0000 (09:52 -0700)]
Merge tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Build fix for Loongson-3"
* tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
Mark Brown [Thu, 2 Jun 2022 12:41:32 +0000 (14:41 +0200)]
arm64/sme: Fix EFI save/restore
The EFI save/restore code is confused. When saving the check for saving
FFR is inverted due to confusion with the streaming mode check, and when
restoring we check if we need to restore FFR by checking the percpu
efi_sm_state without the required wrapper rather than based on the
combination of FA64 support and streaming mode.
Fixes: ecf8b6d19999 ("arm64/sme: Save and restore streaming mode over EFI runtime calls") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220602124132.3528951-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In the awk script, there was a typo with the comparison operator when
checking if the matched pattern is inside an Enum block.
This prevented the generation of the whole sysreg-defs.h header.
Currently if the APB or Debounce clocks aren't yet ready to be requested
the DW GPIO driver will correctly handle that by deferring the probe
procedure, but the error is still printed to the system log. It needlessly
pollutes the log since there was no real error but a request to postpone
the clock request procedure since the clocks subsystem hasn't been fully
initialized yet. Let's fix that by using the dev_err_probe method to print
the APB/clock request error status. It will correctly handle the deferred
probe situation and print the error if it actually happens.
With arch randomness being used by every distro and enabled in
defconfigs, the distinction between rng_has_arch_random() and
rng_is_initialized() is now rather small. In fact, the places where they
differ are now places where paranoid users and system builders really
don't want arch randomness to be used, in which case we should respect
that choice, or places where arch randomness is known to be broken, in
which case that choice is all the more important. So this commit just
removes the function and its one user.
Reviewed-by: Petr Mladek <pmladek@suse.com> # for vsprintf.c Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
random: credit cpu and bootloader seeds by default
This commit changes the default Kconfig values of RANDOM_TRUST_CPU and
RANDOM_TRUST_BOOTLOADER to be Y by default. It does not change any
existing configs or change any kernel behavior. The reason for this is
several fold.
As background, I recently had an email thread with the kernel
maintainers of Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine,
SUSE, and Void as recipients. I noted that some distros trust RDRAND,
some trust EFI, and some trust both, and I asked why or why not. There
wasn't really much of a "debate" but rather an interesting discussion of
what the historical reasons have been for this, and it came up that some
distros just missed the introduction of the bootloader Kconfig knob,
while another didn't want to enable it until there was a boot time
switch to turn it off for more concerned users (which has since been
added). The result of the rather uneventful discussion is that every
major Linux distro enables these two options by default.
While I didn't have really too strong of an opinion going into this
thread -- and I mostly wanted to learn what the distros' thinking was
one way or another -- ultimately I think their choice was a decent
enough one for a default option (which can be disabled at boot time).
I'll try to summarize the pros and cons:
Pros:
- The RNG machinery gets initialized super quickly, and there's no
messing around with subsequent blocking behavior.
- The bootloader mechanism is used by kexec in order for the prior
kernel to initialize the RNG of the next kernel, which increases
the entropy available to early boot daemons of the next kernel.
- Previous objections related to backdoors centered around
Dual_EC_DRBG-like kleptographic systems, in which observing some
amount of the output stream enables an adversary holding the right key
to determine the entire output stream.
This used to be a partially justified concern, because RDRAND output
was mixed into the output stream in varying ways, some of which may
have lacked pre-image resistance (e.g. XOR or an LFSR).
But this is no longer the case. Now, all usage of RDRAND and
bootloader seeds go through a cryptographic hash function. This means
that the CPU would have to compute a hash pre-image, which is not
considered to be feasible (otherwise the hash function would be
terribly broken).
- More generally, if the CPU is backdoored, the RNG is probably not the
realistic vector of choice for an attacker.
- These CPU or bootloader seeds are far from being the only source of
entropy. Rather, there is generally a pretty huge amount of entropy,
not all of which is credited, especially on CPUs that support
instructions like RDRAND. In other words, assuming RDRAND outputs all
zeros, an attacker would *still* have to accurately model every single
other entropy source also in use.
- The RNG now reseeds itself quite rapidly during boot, starting at 2
seconds, then 4, then 8, then 16, and so forth, so that other sources
of entropy get used without much delay.
- Paranoid users can set random.trust_{cpu,bootloader}=no in the kernel
command line, and paranoid system builders can set the Kconfig options
to N, so there's no reduction or restriction of optionality.
- It's a practical default.
- All the distros have it set this way. Microsoft and Apple trust it
too. Bandwagon.
Cons:
- RDRAND *could* still be backdoored with something like a fixed key or
limited space serial number seed or another indexable scheme like
that. (However, it's hard to imagine threat models where the CPU is
backdoored like this, yet people are still okay making *any*
computations with it or connecting it to networks, etc.)
- RDRAND *could* be defective, rather than backdoored, and produce
garbage that is in one way or another insufficient for crypto.
- Suggesting a *reduction* in paranoia, as this commit effectively does,
may cause some to question my personal integrity as a "security
person".
- Bootloader seeds and RDRAND are generally very difficult if not all
together impossible to audit.
Keep in mind that this doesn't actually change any behavior. This
is just a change in the default Kconfig value. The distros already are
shipping kernels that set things this way.
Ard made an additional argument in [1]:
We're at the mercy of firmware and micro-architecture anyway, given
that we are also relying on it to ensure that every instruction in
the kernel's executable image has been faithfully copied to memory,
and that the CPU implements those instructions as documented. So I
don't think firmware or ISA bugs related to RNGs deserve special
treatment - if they are broken, we should quirk around them like we
usually do. So enabling these by default is a step in the right
direction IMHO.
In [2], Phil pointed out that having this disabled masked a bug that CI
otherwise would have caught:
A clean 5.15.45 boots cleanly, whereas a downstream kernel shows the
static key warning (but it does go on to boot). The significant
difference is that our defconfigs set CONFIG_RANDOM_TRUST_BOOTLOADER=y
defining that on top of multi_v7_defconfig demonstrates the issue on
a clean 5.15.45. Conversely, not setting that option in a
downstream kernel build avoids the warning
random: do not use jump labels before they are initialized
Stephen reported that a static key warning splat appears during early
boot on systems that credit randomness from device trees that contain an
"rng-seed" property, because because setup_machine_fdt() is called
before jump_label_init() during setup_arch():
A trivial fix went in to address this on arm64, ed3567c874b0 ("arm64:
Initialize jump labels before setup_machine_fdt()"). I wrote patches as
well for arm32 and risc-v. But still patches are needed on xtensa,
powerpc, arc, and mips. So that's 7 platforms where things aren't quite
right. This sort of points to larger issues that might need a larger
solution.
Instead, this commit just defers setting the static branch until later
in the boot process. random_init() is called after jump_label_init() has
been called, and so is always a safe place from which to adjust the
static branch.
Fixes: 8f20d58ba28b ("random: use static branch for crng_ready()") Reported-by: Stephen Boyd <swboyd@chromium.org> Reported-by: Phil Elwell <phil@raspberrypi.com> Tested-by: Phil Elwell <phil@raspberrypi.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than accounting in bytes and multiplying (shifting), we can just
account in bits and avoid the shift. The main motivation for this is
there are other patches in flux that expand this code a bit, and
avoiding the duplication of "* 8" everywhere makes things a bit clearer.
Cc: stable@vger.kernel.org Fixes: 2aea1841598f ("random: credit architectural init the exact amount") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.
Cc: stable@vger.kernel.org Fixes: 69788ded7904 ("fdt: add support for rng-seed") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
random: avoid checking crng_ready() twice in random_init()
The current flow expands to:
if (crng_ready())
...
else if (...)
if (!crng_ready())
...
The second crng_ready() call is redundant, but can't so easily be
optimized out by the compiler.
This commit simplifies that to:
if (crng_ready()
...
else if (...)
...
Fixes: 2248570c88b7 ("random: move initialization functions out of hot pages") Cc: stable@vger.kernel.org Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Jakub Kicinski [Fri, 10 Jun 2022 05:05:36 +0000 (22:05 -0700)]
Merge tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-06-08
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
====================
Andrea Mayer [Wed, 8 Jun 2022 09:19:17 +0000 (11:19 +0200)]
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
Commit 97b73ebd80c7 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).
The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().
However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.
This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.
The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.
Fixes: 97b73ebd80c7 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Anton Makarov <am@3a-alliance.com> Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220608091917.20345-1-andrea.mayer@uniroma2.it Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 10 Jun 2022 05:02:42 +0000 (22:02 -0700)]
Merge branch 'nfp-fixes-for-v5-19'
Simon Horman says:
====================
nfp: fixes for v5.19
this short series includes two fixes for the NFP driver.
1. Restructure GRE+VLAN flower offload to address a miss match
between the NIC firmware and driver implementation which
prevented these features from working in combination.
2. Prevent unnecessary warnings regarding rate limiting support.-
It is expected that this feature to not _always_ be present
but this was not taken into account when the code to check
for this feature was added.
====================
nfp: flower: restructure flow-key for gre+vlan combination
Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.
Fixes: 6c27392b059d ("nfp: flower: add support to offload QinQ match") Fixes: 61c382052735 ("nfp: flower-ct: compile match sections of flow_payload") Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fei Qin [Wed, 8 Jun 2022 09:29:00 +0000 (11:29 +0200)]
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.
However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.
Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.
Fixes: 0f4b1d2f61df ("nfp: VF rate limit support") Fixes: 69b7d4306a0b ("nfp: support 802.1ad VLAN assingment to VF") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells [Thu, 9 Jun 2022 20:46:04 +0000 (21:46 +0100)]
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context
While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:
In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.
Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).
Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.
Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].
Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.
[ This also undoes commit c471096df5ac ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]
Fix "./include/linux/mm_types.h:279: warning: Function parameter or member
'mlock_count' not described in 'folio'". Also neaten the html by hiding
the anon struct.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
If xas_split_alloc() fails to allocate the necessary nodes to complete the
xarray entry split, it sets the xa_state to -ENOMEM, which xas_nomem()
then interprets as "Please allocate more memory", not as "Please free
any unnecessary memory" (which was the intended outcome). It's confusing
to use xas_nomem() to free memory in this context, so call xas_destroy()
instead.
Reported-by: syzbot+9e27a75a8c24f3fe75c1@syzkaller.appspotmail.com Fixes: b630484fb760 ("mm: Use multi-index entries in the page cache") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
After we have unlocked the mmap_lock for I/O, the file is pinned, but
the VMA is not. Checking this flag after that can be a use-after-free.
It's not a terribly interesting use-after-free as it can only read one
bit, and it's used to decide whether to read 2MB or 4MB. But it
upsets the automated tools and it's generally bad practice anyway,
so let's fix it.
Reported-by: syzbot+5b96d55e5b54924c77ad@syzkaller.appspotmail.com Fixes: bb527e717ffd ("mm/filemap: Support VM_HUGEPAGE for file mappings") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
We must hold a reference over the call to filemap_release_folio(),
otherwise the page cache will put the last reference to the folio
before we unlock it, leading to splats like this:
It's an error path, so it doesn't see much testing.
Reported-by: Darrick J. Wong <djwong@kernel.org> Fixes: ca2caef9893d ("readahead: Use a folio in read_pages()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Yupeng Li [Wed, 8 Jun 2022 01:12:29 +0000 (09:12 +0800)]
MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
undefined error,fix cpu_hwmon compile options to be bool.Some kernel
compilation error information is as follows:
Linus Torvalds [Thu, 9 Jun 2022 19:26:05 +0000 (12:26 -0700)]
Merge tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, writeback, and quota fixes and cleanups from Jan Kara:
"A fix for race in writeback code and two cleanups in quota and ext2"
* tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Prevent memory allocation recursion while holding dq_lock
writeback: Fix inode->i_io_list not be protected by inode->i_lock error
fs: Fix syntax errors in comments
Linus Torvalds [Thu, 9 Jun 2022 19:17:43 +0000 (12:17 -0700)]
Merge tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- On 32-bit fix overread/overwrite of thread_struct via ptrace
PEEK/POKE.
- Fix softirqs not switching to the softirq stack since we moved
irq_exit().
- Force thread size increase when KASAN is enabled to avoid stack
overflows.
- On Book3s 64 mark more code as not to be instrumented by KASAN to
avoid crashes.
- Exempt __get_wchan() from KASAN checking, as it's inherently racy.
- Fix a recently introduced crash in the papr_scm driver in some
configurations.
- Remove include of <generated/compile.h> which is forbidden.
Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner,
He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras,
Sachin Sant, Vaibhav Jain, and Wanming Hu.
* tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
powerpc/book3e: get rid of #include <generated/compile.h>
powerpc/kasan: Force thread size increase with KASAN
powerpc/papr_scm: don't requests stats with '0' sized stats buffer
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
powerpc/kasan: Silence KASAN warnings in __get_wchan()
powerpc/kasan: Mark more real-mode code as not to be instrumented
Masahiro Yamada [Wed, 8 Jun 2022 01:11:00 +0000 (10:11 +0900)]
scripts/check-local-export: avoid 'wait $!' for process substitution
Bash 4.4, released in 2016, supports 'wait $!' to check the exit status
of a process substitution, but it seems too new.
Some people using older bash versions (on CentOS 7, Ubuntu 16.04, etc.)
reported an error like this:
./scripts/check-local-export: line 54: wait: pid 17328 is not a child of this shell
I used the process substitution to avoid a pipeline, which executes each
command in a subshell. If the while-loop is executed in the subshell
context, variable changes within are lost after the subshell terminates.
Fortunately, Bash 4.2, released in 2011, supports the 'lastpipe' option,
which makes the last element of a pipeline run in the current shell process.
Switch to the pipeline with 'lastpipe' solution, and also set 'pipefail'
to catch errors from ${NM}.
Add the bash requirement to Documentation/process/changes.rst.
Fixes: db4637cd8296 ("kbuild: check static EXPORT_SYMBOL* by script instead of modpost") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Wang Yugui <wangyugui@e16-tech.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Thu, 9 Jun 2022 18:29:36 +0000 (11:29 -0700)]
netfs: gcc-12: temporarily disable '-Wattribute-warning' for now
This is a pure band-aid so that I can continue merging stuff from people
while some of the gcc-12 fallout gets sorted out.
In particular, gcc-12 is very unhappy about the kinds of pointer
arithmetic tricks that netfs does, and that makes the fortify checks
trigger in afs and ceph:
In function ‘fortify_memset_chk’,
inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2,
inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2,
inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2:
include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
258 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and the reason is that netfs_i_context_init() is passed a 'struct inode'
pointer, and then it does
where that netfs_i_context() function just does pointer arithmetic on
the inode pointer, knowing that the netfs_i_context is laid out
immediately after it in memory.
This is all truly disgusting, since the whole "netfs_i_context is laid
out immediately after it in memory" is not actually remotely true in
general, but is just made to be that way for afs and ceph.
See for example fs/cifs/cifsglob.h:
struct cifsInodeInfo {
struct {
/* These must be contiguous */
struct inode vfs_inode; /* the VFS's inode record */
struct netfs_i_context netfs_ctx; /* Netfslib context */
};
[...]
and realize that this is all entirely wrong, and the pointer arithmetic
that netfs_i_context() is doing is also very very wrong and wouldn't
give the right answer if netfs_ctx had different alignment rules from a
'struct inode', for example).
Anyway, that's just a long-winded way to say "the gcc-12 warning is
actually quite reasonable, and our code happens to work but is pretty
disgusting".
This is getting fixed properly, but for now I made the mistake of
thinking "the week right after the merge window tends to be calm for me
as people take a breather" and I did a sustem upgrade. And I got gcc-12
as a result, so to continue merging fixes from people and not have the
end result drown in warnings, I am fixing all these gcc-12 issues I hit.
Linus Torvalds [Thu, 9 Jun 2022 17:11:12 +0000 (10:11 -0700)]
gcc-12: disable '-Warray-bounds' universally for now
In commit c7eea20247b1 ("s390: disable -Warray-bounds") the s390 people
disabled the '-Warray-bounds' warning for gcc-12, because the new logic
in gcc would cause warnings for their use of the S390_lowcore macro,
which accesses absolute pointers.
It turns out gcc-12 has many other issues in this area, so this takes
that s390 warning disable logic, and turns it into a kernel build config
entry instead.
Part of the intent is that we can make this all much more targeted, and
use this conflig flag to disable it in only particular configurations
that cause problems, with the s390 case as an example:
select GCC12_NO_ARRAY_BOUNDS
and we could do that for other configuration cases that cause issues.
Or we could possibly use the CONFIG_CC_NO_ARRAY_BOUNDS thing in a more
targeted way, and disable the warning only for particular uses: again
the s390 case as an example:
We'll try to limit this later, since the gcc-12 problems are rare enough
that *much* of the kernel can be built with it without disabling this
warning.
Linus Torvalds [Thu, 9 Jun 2022 17:03:28 +0000 (10:03 -0700)]
mellanox: mlx5: avoid uninitialized variable warning with gcc-12
gcc-12 started warning about 'tracker' being used uninitialized:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’:
drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized]
786 | struct lag_tracker tracker;
| ^~~~~~~
which seems to be because it doesn't track how the use (and
initialization) is bound by the 'do_bond' flag.
But admittedly that 'do_bond' usage is fairly complicated, and involves
passing it around as an argument to helper functions, so it's somewhat
understandable that gcc doesn't see how that all works.
This function could be rewritten to make the use of that tracker
variable more obviously safe, but for now I'm just adding the forced
initialization of it.
Linus Torvalds [Thu, 9 Jun 2022 16:41:42 +0000 (09:41 -0700)]
gcc-12: disable '-Wdangling-pointer' warning for now
While the concept of checking for dangling pointers to local variables
at function exit is really interesting, the gcc-12 implementation is not
compatible with reality, and results in false positives.
For example, gcc sees us putting things on a local list head allocated
on the stack, which involves exactly those kinds of pointers to the
local stack entry:
In function ‘__list_add’,
inlined from ‘list_add_tail’ at include/linux/list.h:102:2,
inlined from ‘rebuild_snap_realms’ at fs/ceph/snap.c:434:2:
include/linux/list.h:74:19: warning: storing the address of local variable ‘realm_queue’ in ‘*&realm_27(D)->rebuild_item.prev’ [-Wdangling-pointer=]
74 | new->prev = prev;
| ~~~~~~~~~~^~~~~~
But then gcc - understandably - doesn't really understand the big
picture how the doubly linked list works, so doesn't see how we then end
up emptying said list head in a loop and the pointer we added has been
removed.
Gcc also complains about us (intentionally) using this as a way to store
a kind of fake stack trace, eg
drivers/acpi/acpica/utdebug.c:40:38: warning: storing the address of local variable ‘current_sp’ in ‘acpi_gbl_entry_stack_pointer’ [-Wdangling-pointer=]
40 | acpi_gbl_entry_stack_pointer = ¤t_sp;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
which is entirely reasonable from a compiler standpoint, and we may want
to change those kinds of patterns, but not not.
So this is one of those "it would be lovely if the compiler were to
complain about us leaving dangling pointers to the stack", but not this
way.
Linus Torvalds [Wed, 8 Jun 2022 23:59:29 +0000 (16:59 -0700)]
drm: imx: fix compiler warning with gcc-12
Gcc-12 correctly warned about this code using a non-NULL pointer as a
truth value:
drivers/gpu/drm/imx/ipuv3-crtc.c: In function ‘ipu_crtc_disable_planes’:
drivers/gpu/drm/imx/ipuv3-crtc.c:72:21: error: the comparison will always evaluate as ‘true’ for the address of ‘plane’ will never be NULL [-Werror=address]
72 | if (&ipu_crtc->plane[1] && plane == &ipu_crtc->plane[1]->base)
| ^
due to the extraneous '&' address-of operator.
Philipp Zabel points out that The mistake had no adverse effect since
the following condition doesn't actually dereference the NULL pointer,
but the intent of the code was obviously to check for it, not to take
the address of the member.
Zheng Zengkai [Thu, 9 Jun 2022 02:56:56 +0000 (10:56 +0800)]
Documentation/features: Update the arch support status files
The arch support status files don't match reality as of v5.19-rc1,
use the features-refresh.sh to refresh all the arch-support.txt files
in place. The main effect is to add entries for the new loong
architecture.
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
The ptrace PEEKUSR/POKEUSR (aka PEEKUSER/POKEUSER) API allows a process
to read/write registers of another process.
To get/set a register, the API takes an index into an imaginary address
space called the "USER area", where the registers of the process are
laid out in some fashion.
The kernel then maps that index to a particular register in its own data
structures and gets/sets the value.
The API only allows a single machine-word to be read/written at a time.
So 4 bytes on 32-bit kernels and 8 bytes on 64-bit kernels.
The way floating point registers (FPRs) are addressed is somewhat
complicated, because double precision float values are 64-bit even on
32-bit CPUs. That means on 32-bit kernels each FPR occupies two
word-sized locations in the USER area. On 64-bit kernels each FPR
occupies one word-sized location in the USER area.
Internally the kernel stores the FPRs in an array of u64s, or if VSX is
enabled, an array of pairs of u64s where one half of each pair stores
the FPR. Which half of the pair stores the FPR depends on the kernel's
endianness.
To handle the different layouts of the FPRs depending on VSX/no-VSX and
big/little endian, the TS_FPR() macro was introduced.
Unfortunately the TS_FPR() macro does not take into account the fact
that the addressing of each FPR differs between 32-bit and 64-bit
kernels. It just takes the index into the "USER area" passed from
userspace and indexes into the fp_state.fpr array.
On 32-bit there are 64 indexes that address FPRs, but only 32 entries in
the fp_state.fpr array, meaning the user can read/write 256 bytes past
the end of the array. Because the fp_state sits in the middle of the
thread_struct there are various fields than can be overwritten,
including some pointers. As such it may be exploitable.
It has also been observed to cause systems to hang or otherwise
misbehave when using gdbserver, and is probably the root cause of this
report which could not be easily reproduced:
https://lore.kernel.org/linuxppc-dev/dc38afe9-6b78-f3f5-666b-986939e40fc6@keymile.com/
Rather than trying to make the TS_FPR() macro even more complicated to
fix the bug, or add more macros, instead add a special-case for 32-bit
kernels. This is more obvious and hopefully avoids a similar bug
happening again in future.
Note that because 32-bit kernels never have VSX enabled the code doesn't
need to consider TS_FPRWIDTH/OFFSET at all. Add a BUILD_BUG_ON() to
ensure that 32-bit && VSX is never enabled.
Fixes: ef54ff33e7d9 ("powerpc: PTRACE_PEEKUSR/PTRACE_POKEUSER of FPR registers in little endian builds") Cc: stable@vger.kernel.org # v3.13+ Reported-by: Ariel Miculas <ariel.miculas@belden.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220609133245.573565-1-mpe@ellerman.id.au
Systems with AST graphics can have multiple output; typically VGA
plus some other port. Record detected output chips in a bitmask and
initialize each output on its own.
Assume a VGA output by default and use SIL164 and DP501 if available.
For ASTDP assume that it can run in parallel with VGA.
Tested on AST2100.
v3:
* define a macro for each BIT(ast_tx_chip) (Patrik)
v2:
* make VGA/SIL164/DP501 mutually exclusive
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: 02e861909549 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de
(cherry picked from commit 7f35680ada234ce00828b8ea841ba7ca1e00ff52) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
projects / kernel.git / log