1) Fix a kernel-info-leak in pfkey.
From Haimin Zhang.
2) Fix an incorrect check of the return value of ipv6_skip_exthdr.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp6: fix check on ipv6_skip_exthdr's return value
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
====================
Jakub Kicinski [Wed, 16 Mar 2022 18:08:09 +0000 (11:08 -0700)]
Merge tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.17
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
* tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "ath10k: drop beacon and probe response which leak from other channel"
====================
I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.
There was a conflict due to cfg80211 API changes but that was easy to fix.
Jiasheng Jiang [Mon, 14 Mar 2022 02:01:25 +0000 (10:01 +0800)]
hv_netvsc: Add check for kvmalloc_array
As the potential failure of the kvmalloc_array(),
it should be better to check and restore the 'data'
if fails in order to avoid the dereference of the
NULL pointer.
Fix double free possibility in iavf_disable_vf, as crit_lock is
freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf.
Remove mutex_unlock in iavf_disable_vf.
Without this patch there is double free scenario, when calling
iavf_reset_task.
Fixes: c4569c809d75 ("iavf: Fix deadlock in iavf_reset_task") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
It is possible to do NULL pointer dereference in routine that updates
Tx ring stats. Currently only stats and bytes are updated when ring
pointer is valid, but later on ring is accessed to propagate gathered Tx
stats onto VSI stats.
Change the existing logic to move to next ring when ring is NULL.
Fixes: 8015762f94a4 ("ice: split ice_ring onto Tx/Rx separate structs") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Eric Dumazet [Sat, 12 Mar 2022 23:29:58 +0000 (15:29 -0800)]
net/packet: fix slab-out-of-bounds access in packet_recvmsg()
syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]
Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631
Michael Walle [Sat, 12 Mar 2022 22:41:40 +0000 (23:41 +0100)]
net: mdio: mscc-miim: fix duplicate debugfs entry
This driver can have up to two regmaps. If the second one is registered
its debugfs entry will have the same name as the first one and the
following error will be printed:
[ 3.833521] debugfs: Directory 'e200413c.mdio' with parent 'regmap' already present!
Give the second regmap a name to avoid this.
Fixes: ec4bd430fec2 ("net: mdio: mscc-miim: convert to a regmap implementation") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312224140.4173930-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patchset contains Netfilter fixes for net coming late
in the 5.17-rc process:
1) Revert port remap to mitigate shadowing service ports, this is causing
problems in existing setups and this mitigation can be achieved with
explicit ruleset, eg.
... tcp sport < 16386 tcp dport >= 32768 masquerade random
This patches provided a built-in policy similar to the one described above.
2) Disable register tracking infrastructure in nf_tables. Florian reported
two issues:
- Existing expressions with no implemented .reduce interface
that causes data-store on register should cancel the tracking.
- Register clobbering might be possible storing data on registers that
are larger than 32-bits.
This might lead to generating incorrect ruleset bytecode. These two
issues are scheduled to be addressed in the next release cycle.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable register tracking
Revert "netfilter: conntrack: tag conntracks picked up in local out hook"
Revert "netfilter: nat: force port remap to prevent shadowing well-known ports"
====================
Kurt Cancemi [Sat, 12 Mar 2022 20:15:13 +0000 (15:15 -0500)]
net: phy: marvell: Fix invalid comparison in the resume and suspend functions
This bug resulted in only the current mode being resumed and suspended when
the PHY supported both fiber and copper modes and when the PHY only supported
copper mode the fiber mode would incorrectly be attempted to be resumed and
suspended.
Fixes: bd1de38ec57a ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.") Signed-off-by: Kurt Cancemi <kurt@x64architecture.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca [Thu, 10 Mar 2022 10:49:00 +0000 (11:49 +0100)]
esp6: fix check on ipv6_skip_exthdr's return value
Commit e2980f7adaa9 ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:
IPv6 | ext | ... | ext | UDP | ESP | ...
That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.
In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).
Fixes: e2980f7adaa9 ("ipv6: check return value of ipv6_skip_exthdr") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The register tracking infrastructure is incomplete, it might lead to
generating incorrect ruleset bytecode, disable it by now given we are
late in the release process.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Jiyong Park [Fri, 11 Mar 2022 02:00:16 +0000 (11:00 +0900)]
vsock: each transport cycles only on its own sockets
When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.
There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.
Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.
Niels Dossche [Thu, 10 Mar 2022 23:27:08 +0000 (00:27 +0100)]
alx: acquire mutex for alx_reinit in alx_change_mtu
alx_reinit has a lockdep assertion that the alx->mtx mutex must be held.
alx_reinit is called from two places: alx_reset and alx_change_mtu.
alx_reset does acquire alx->mtx before calling alx_reinit.
alx_change_mtu does not acquire this mutex, nor do its callers or any
path towards alx_change_mtu.
Acquire the mutex in alx_change_mtu.
The issue was introduced when the fine-grained locking was introduced
to the code to replace the RTNL. The same commit also introduced the
lockdep assertion.
Linus Torvalds [Fri, 11 Mar 2022 00:47:58 +0000 (16:47 -0800)]
Merge tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes: 0fe64b9ac540b ("xdp: Allow registering memory model without rxq reference") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Thu, 10 Mar 2022 17:16:41 +0000 (18:16 +0100)]
ice: Fix race condition during interface enslave
Commit 3b5de044e6d2b3 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.
Reproducer:
```
#!/bin/sh
ip link add lag0 type bond mode 1 miimon 100
ip link set lag0
for n in {1..10}; do
echo Cycle: $n
ip link set ens7f0 master lag0
sleep 1
ip link set ens7f0 nomaster
done
```
1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
is called from ice_service_task() context, aux device is created
and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
RTNL lock and that notifier calls ice_unplug_aux_dev(). That
function tries to take aux device->lock but this is already taken
by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
taken in step 2
4. Dead-lock
The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
then ice_unplug_aux_dev() is called. If it is set (in other words
plugging of aux device was requested and ice_plug_aux_dev() is
potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
whether it was already cleared by ice_clear_rdma_cap(). If so then
aux device is unplugged.
Signed-off-by: Ivan Vecera <ivecera@redhat.com> Co-developed-by: Petr Oros <poros@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Link: https://lore.kernel.org/r/20220310171641.3863659-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jeremy Linton [Thu, 10 Mar 2022 04:55:35 +0000 (22:55 -0600)]
net: bcmgenet: Don't claim WOL when its not available
Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:
"Supports Wake-on: gsf"
which is false.
Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:
"Supports Wake-on: d"
This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.
Fixes: 1a0357acc00b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianglei Nie [Wed, 9 Mar 2022 12:18:24 +0000 (20:18 +0800)]
net: arc_emac: Fix use after free in arc_mdio_probe()
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free
the "bus". But bus->name is still used in the next line, which will lead
to a use after free.
We can fix it by putting the name in a local variable and make the
bus->name point to the rodata section "name",then use the name in the
error message without referring to bus to avoid the uaf.
Jakub Kicinski [Thu, 10 Mar 2022 22:32:32 +0000 (14:32 -0800)]
Merge tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-03-09
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
====================
Linus Torvalds [Thu, 10 Mar 2022 20:43:06 +0000 (12:43 -0800)]
Merge tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small fixes for staging drivers for 5.17-rc8 or -final,
which ever comes next.
They resolve some reported problems:
- rtl8723bs wifi driver deadlock fix for reported problem that is a
revert of a previous patch. Also a documentation fix is added so
that the same problem hopefully can not come back again.
- gdm724x driver use-after-free fix for a reported problem.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Improve the comment explaining the locking rules
staging: rtl8723bs: Fix access-point mode deadlock
staging: gdm724x: fix use after free in gdm_lte_rx()
Miaoqian Lin [Thu, 10 Mar 2022 01:53:13 +0000 (01:53 +0000)]
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: e8c33fba7e22 ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 10 Mar 2022 19:43:01 +0000 (11:43 -0800)]
Merge tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
Linus Torvalds [Tue, 8 Mar 2022 19:55:48 +0000 (11:55 -0800)]
mm: gup: make fault_in_safe_writeable() use fixup_user_fault()
Instead of using GUP, make fault_in_safe_writeable() actually force a
'handle_mm_fault()' using the same fixup_user_fault() machinery that
futexes already use.
Using the GUP machinery meant that fault_in_safe_writeable() did not do
everything that a real fault would do, ranging from not auto-expanding
the stack segment, to not updating accessed or dirty flags in the page
tables (GUP sets those flags on the pages themselves).
The latter causes problems on architectures (like s390) that do accessed
bit handling in software, which meant that fault_in_safe_writeable()
didn't actually do all the fault handling it needed to, and trying to
access the user address afterwards would still cause faults.
Arnd Bergmann [Thu, 10 Mar 2022 14:25:45 +0000 (15:25 +0100)]
Merge tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.17 (part 2)
Allow using old PCIe card on Armada 37xx
* tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
Pali Rohár [Thu, 10 Mar 2022 10:39:23 +0000 (11:39 +0100)]
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit 20d4809264b7 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().
Add the missing argument.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 6943160c97b6 ("ARM: report Spectre v2 status through sysfs") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 10 Mar 2022 11:55:33 +0000 (03:55 -0800)]
Merge tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a probe failure for Tegra241 GPIO controller in gpio-tegra186
- revert changes that caused a regression in the sysfs user-space
interface
- correct the debounce time conversion in GPIO ACPI
- statify a struct in gpio-sim and fix a typo
- update registers in correct order (hardware quirk) in gpio-ts4900
* tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix a typo
gpio: ts4900: Do not set DAT and OE together
gpio: sim: Declare gpio_sim_hog_config_item_ops static
gpiolib: acpi: Convert ACPI value of debounce to microseconds
gpio: Revert regression in sysfs-gpio (gpiolib.c)
gpio: tegra186: Add IRQ per bank for Tegra241
Mark Featherston [Thu, 10 Mar 2022 01:16:16 +0000 (17:16 -0800)]
gpio: ts4900: Do not set DAT and OE together
This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.
Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.
Haimin Zhang [Tue, 8 Mar 2022 03:20:28 +0000 (11:20 +0800)]
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
to initialize the buffer of supp_skb to fix a kernel-info-leak issue.
1) Function pfkey_register calls compose_sadb_supported to request
a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate
a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then
compose_sadb_supported treats the memory as a struct sadb_supported and
begins to initialize. But it just initializes the field sadb_supported_len
and field sadb_supported_exttype without field sadb_supported_reserved.
Linus Torvalds [Thu, 10 Mar 2022 04:58:29 +0000 (20:58 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One more small batch of clk driver fixes:
- A fix for the Qualcomm GDSC power domain delays that avoids black
screens at boot on some more recent SoCs that use a different delay
than the hard-coded delays in the driver.
- A build fix LAN966X clk driver that let it be built on
architectures that didn't have IOMEM"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: lan966x: Fix linking error
clk: qcom: dispcc: Update the transition delay for MDSS GDSC
clk: qcom: gdsc: Add support to update GDSC transition delay
Linus Torvalds [Thu, 10 Mar 2022 04:44:17 +0000 (20:44 -0800)]
Merge tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Several Linux PV device frontends are using the grant table interfaces
for removing access rights of the backends in ways being subject to
race conditions, resulting in potential data leaks, data corruption by
malicious backends, and denial of service triggered by malicious
backends:
- blkfront, netfront, scsifront and the gntalloc driver are testing
whether a grant reference is still in use. If this is not the case,
they assume that a following removal of the granted access will
always succeed, which is not true in case the backend has mapped
the granted page between those two operations.
As a result the backend can keep access to the memory page of the
guest no matter how the page will be used after the frontend I/O
has finished. The xenbus driver has a similar problem, as it
doesn't check the success of removing the granted access of a
shared ring buffer.
- blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p,
kbdfront, and pvcalls are using a functionality to delay freeing a
grant reference until it is no longer in use, but the freeing of
the related data page is not synchronized with dropping the granted
access.
As a result the backend can keep access to the memory page even
after it has been freed and then re-used for a different purpose.
- netfront will fail a BUG_ON() assertion if it fails to revoke
access in the rx path.
This will result in a Denial of Service (DoS) situation of the
guest which can be triggered by the backend"
* tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netfront: react properly to failing gnttab_end_foreign_access_ref()
xen/gnttab: fix gnttab_end_foreign_access() without page specified
xen/pvcalls: use alloc/free_pages_exact()
xen/9p: use alloc/free_pages_exact()
xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done()
xen: remove gnttab_query_foreign_access()
xen/gntalloc: don't use gnttab_query_foreign_access()
xen/scsifront: don't use gnttab_query_foreign_access() for mapped status
xen/netfront: don't use gnttab_query_foreign_access() for mapped status
xen/blkfront: don't use gnttab_query_foreign_access() for mapped status
xen/grant-table: add gnttab_try_end_foreign_access()
xen/xenbus: don't let xenbus_grant_ring() remove grants in error case
====================
selftests: pmtu.sh: Fix cleanup of processes launched in subshell.
Depending on the options used, pmtu.sh may launch tcpdump and nettest
processes in the background. However it fails to clean them up after
the tests complete.
Patch 1 allows the cleanup() function to read the list of PIDs launched
by the tests.
Patch 2 fixes the way the nettest PIDs are retrieved.
====================
Guillaume Nault [Tue, 8 Mar 2022 22:15:03 +0000 (23:15 +0100)]
selftests: pmtu.sh: Kill nettest processes launched in subshell.
When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).
Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.
Also, double quote variables on the modified lines, to avoid shellcheck
warnings.
Guillaume Nault [Tue, 8 Mar 2022 22:15:00 +0000 (23:15 +0100)]
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Pavel Skripkin [Tue, 8 Mar 2022 18:50:07 +0000 (21:50 +0300)]
NFC: port100: fix use-after-free in port100_send_complete
Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.
port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free
Fail log:
BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
__usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670
ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit 366da5875e46 ("ARM: Spectre-BHB
workaround"):
ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS
Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.
arm64: Do not include __READ_ONCE() block in assembly files
When building arm64 defconfig + CONFIG_LTO_CLANG_{FULL,THIN}=y after
commit e33469d79d55 ("arm64: Mitigate spectre style branch history side
channels"), the following error occurs:
Marc figured out that moving "#include <linux/init.h>" in
include/linux/arm-smccc.h into a !__ASSEMBLY__ block resolves it. The
full include chain with CONFIG_LTO=y from include/linux/arm-smccc.h:
The asm/alternative-macros.h include in asm/rwonce.h only happens when
CONFIG_LTO is set, which ultimately casues asm/assembler.h to be
included before the definition of ARM_SMCCC_ARCH_WORKAROUND_3. As a
result, the preprocessor does not expand ARM_SMCCC_ARCH_WORKAROUND_3 in
__mitigate_spectre_bhb_fw, which results in the error above.
Avoid this problem by just avoiding the CONFIG_LTO=y __READ_ONCE() block
in asm/rwonce.h with assembly files, as nothing in that block is useful
to assembly files, which allows ARM_SMCCC_ARCH_WORKAROUND_3 to be
properly expanded with CONFIG_LTO=y builds.
Linus Torvalds [Wed, 9 Mar 2022 21:47:12 +0000 (13:47 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- sysfs attributes leak fix for Google Vivaldi driver (Dmitry Torokhov)
- fix for potential out-of-bounds read in Thrustmaster driver (Pavel
Skripkin)
- error handling reference leak in Elo driver (Jiri Kosina)
- a few new device IDs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: nintendo: check the return value of alloc_workqueue()
HID: vivaldi: fix sysfs attributes leak
HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts
HID: elo: Revert USB reference counting
HID: Add support for open wheel and no attachment to T300
HID: logitech-dj: add new lightspeed receiver id
Linus Torvalds [Wed, 9 Mar 2022 20:59:21 +0000 (12:59 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix compilation of eBPF object files that indirectly include
mte-kasan.h.
- Fix test for execute-only permissions with EPAN (Enhanced Privileged
Access Never, ARMv8.7 feature).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kasan: fix include error in MTE functions
arm64: Ensure execute-only permissions are not allowed without EPAN
In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com> Fixes: 366da5875e46 ("ARM: Spectre-BHB workaround") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Ben-Ishay [Wed, 2 Mar 2022 15:07:08 +0000 (17:07 +0200)]
net/mlx5e: SHAMPO, reduce TIR indication
SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the
first place to enforce suitability between connected TIR and RQ, this
enforcement does not exist in current the Firmware implementation and was
redundant in the first place.
Roi Dayan [Wed, 16 Feb 2022 11:56:57 +0000 (13:56 +0200)]
net/mlx5e: Lag, Only handle events from highest priority multipath entry
There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.
Fixes: 228d27b4425e ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dima Chumak [Mon, 17 Jan 2022 13:32:16 +0000 (15:32 +0200)]
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.
Fixes: e7b4158c2af0 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Moshe Shemesh [Fri, 4 Feb 2022 09:47:44 +0000 (11:47 +0200)]
net/mlx5: Fix a race on command flush flow
Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.
Paul Semel [Tue, 8 Mar 2022 09:30:58 +0000 (10:30 +0100)]
arm64: kasan: fix include error in MTE functions
Fix `error: expected string literal in 'asm'`.
This happens when compiling an ebpf object file that includes
`net/net_namespace.h` from linux kernel headers.
Duoming Zhou [Tue, 8 Mar 2022 08:12:23 +0000 (16:12 +0800)]
ax25: Fix NULL pointer dereference in ax25_kill_by_device
When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:
This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.
Fixes: 2f1ff39b04e5 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs") Reported-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Miaoqian Lin [Tue, 8 Mar 2022 07:42:47 +0000 (07:42 +0000)]
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.
Fixes: 9c65bff66af7 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Tue, 8 Mar 2022 06:57:39 +0000 (14:57 +0800)]
net: ethernet: lpc_eth: Handle error for clk_enable
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes: 75aecfae9131 ("lpc32xx: Added ethernet driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
net:mcf8390: Use platform_get_irq() to get the interrupt
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.
platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.
It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 9 Mar 2022 10:42:14 +0000 (10:42 +0000)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-03-08
This series contains updates to iavf, i40e, and ice drivers.
Michal ensures netdev features are properly updated to reflect VLAN
changes received from PF and adds an additional flag for MSI-X
reinitialization as further differentiation of reinitialization
operations is needed for iavf.
Jake stops disabling of VFs due to failed virtchannel responses for
i40e and ice driver.
Dave moves MTU event notification to the service task to prevent issues
with RTNL lock for ice.
Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of
GFP_KERNEL for ice.
Jedrzej fixes the value for link speed comparison which was preventing
the requested value from being set for ice.
---
Note: This will conflict when merging with net-next. Resolution:
diff --cc drivers/net/ethernet/intel/ice/ice.h
index dc42ff92dbad,3121f9b04f59..000000000000
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags
ICE_FLAG_LEGACY_RX,
ICE_FLAG_VF_TRUE_PROMISC_ENA,
ICE_FLAG_MDD_AUTO_RESET_VF,
+ ICE_FLAG_VF_VLAN_PRUNING,
ICE_FLAG_LINK_LENIENT_MODE_ENA,
ICE_FLAG_PLUG_AUX_DEV,
+ ICE_FLAG_MTU_CHANGED,
+ ICE_FLAG_GNSS, /* GNSS successfully initialized */
ICE_PF_FLAGS_NBITS /* must be last */
};
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tung Nguyen [Tue, 8 Mar 2022 02:11:59 +0000 (02:11 +0000)]
tipc: fix incorrect order of state message data sanity check
When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.
This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.
Fixes: 893ed6a282b3 ("tipc: improve size validations for received domain records") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 02:47:49 +0000 (02:47 +0000)]
ethernet: Fix error handling in xemaclite_of_probe
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.
Fixes: ff0e09f57d7c ("net: emaclite: adding MDIO and phy lib support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection
Commit f5716f288dbb ("block: don't protect submit_bio_checks by
q_usage_counter") moved blk_mq_attempt_bio_merge and rq_qos_throttle
calls out of q_usage_counter protection. However, these functions require
q_usage_counter protection. The blk_mq_attempt_bio_merge call without
the protection resulted in blktests block/005 failure with KASAN null-
ptr-deref or use-after-free at bio merge. The rq_qos_throttle call
without the protection caused kernel hang at qos throttle.
To fix the failures, move the blk_mq_attempt_bio_merge and
rq_qos_throttle calls back to q_usage_counter protection.
Fixes: f5716f288dbb ("block: don't protect submit_bio_checks by q_usage_counter") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20220308080915.3473689-1-shinichiro.kawasaki@wdc.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.
Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)
Fixes: 6a4fe288293f ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dave Ertman [Fri, 18 Feb 2022 20:39:25 +0000 (12:39 -0800)]
ice: Fix error with handling of bonding MTU
When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held. This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev. Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.
Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.
Fixes: f316c8300c2f7 ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Thu, 17 Feb 2022 00:51:36 +0000 (16:51 -0800)]
ice: stop disabling VFs due to PF error responses
The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.
This logic was added to the ice driver in commit 9c60e874df88 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit eb89ebf92394 ("i40e: implement virtual
device interface").
Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.
The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.
Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.
This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.
In fact, the change from dev_err to dev_info in i40e commit 7e23a86ac5ca
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.
We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.
Fixes: 9c60e874df88 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Thu, 17 Feb 2022 00:51:35 +0000 (16:51 -0800)]
i40e: stop disabling VFs due to PF error responses
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.
This logic originates from the early implementation of VF support in
commit eb89ebf92394 ("i40e: implement virtual device interface").
That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.
There is no justification for this behavior in the original
implementation. In fact, a later commit 7e23a86ac5ca ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit 6ca71f777c8b ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.
That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.
It is clear this check does not make sense, and causes problems which
led to ugly workarounds.
Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.
Fixes: 6ca71f777c8b ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: eb89ebf92394 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED
which should indicate that interrupts need to be completely
reinitialized during reset leads to RTNL deadlocks using ethtool -C
while a reset is in progress.
To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED
used to trigger MSI-X reinit.
New combined setting is fixed adopt after VF reset.
This has been implemented by call reinit interrupt scheme
during VF reset.
Without this fix new combined setting has never been adopted.
Fixes: 30e883952157 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
iavf: Fix handling of vlan strip virtual channel messages
Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.
Fixes: 2a8d72b4a0f1 ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Tue, 8 Mar 2022 17:41:18 +0000 (09:41 -0800)]
Merge tag 'fuse-fixes-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix an issue with splice on the fuse device
- Fix a regression in the fileattr API conversion
- Add a small userspace API improvement
* tag 'fuse-fixes-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix pipe buffer lifetime for direct_io
fuse: move FUSE_SUPER_MAGIC definition to magic.h
fuse: fix fileattr op failure
Linus Torvalds [Tue, 8 Mar 2022 17:27:25 +0000 (09:27 -0800)]
Merge tag 'arm64-spectre-bhb-for-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 spectre fixes from James Morse:
"ARM64 Spectre-BHB mitigations:
- Make EL1 vectors per-cpu
- Add mitigation sequences to the EL1 and EL2 vectors on vulnerble
CPUs
- Implement ARCH_WORKAROUND_3 for KVM guests
- Report Vulnerable when unprivileged eBPF is enabled"
* tag 'arm64-spectre-bhb-for-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: proton-pack: Include unprivileged eBPF status in Spectre v2 mitigation reporting
arm64: Use the clearbhb instruction in mitigations
KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated
arm64: Mitigate spectre style branch history side channels
arm64: proton-pack: Report Spectre-BHB vulnerabilities as part of Spectre-v2
arm64: Add percpu vectors for EL1
arm64: entry: Add macro for reading symbol addresses from the trampoline
arm64: entry: Add vectors that have the bhb mitigation sequences
arm64: entry: Add non-kpti __bp_harden_el1_vectors for mitigations
arm64: entry: Allow the trampoline text to occupy multiple pages
arm64: entry: Make the kpti trampoline's kpti sequence optional
arm64: entry: Move trampoline macros out of ifdef'd section
arm64: entry: Don't assume tramp_vectors is the start of the vectors
arm64: entry: Allow tramp_alias to access symbols after the 4K boundary
arm64: entry: Move the trampoline data page before the text page
arm64: entry: Free up another register on kpti's tramp_exit path
arm64: entry: Make the trampoline cleanup optional
KVM: arm64: Allow indirect vectors to be used without SPECTRE_V3A
arm64: spectre: Rename spectre_v4_patch_fw_mitigation_conduit
arm64: entry.S: Add ventry overflow sanity checks
Linus Torvalds [Tue, 8 Mar 2022 17:08:06 +0000 (09:08 -0800)]
Merge tag 'for-linus-bhb' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM spectre fixes from Russell King:
"ARM Spectre BHB mitigations.
These patches add Spectre BHB migitations for the following Arm CPUs
to the 32-bit ARM kernels:
- Cortex A15
- Cortex A57
- Cortex A72
- Cortex A73
- Cortex A75
- Brahma B15
for CVE-2022-23960"
* tag 'for-linus-bhb' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: include unprivileged BPF status in Spectre V2 reporting
ARM: Spectre-BHB workaround
ARM: use LOADADDR() to get load address of sections
ARM: early traps initialisation
ARM: report Spectre v2 status through sysfs
On some boards, for routing CAN signals from controller to transceivers,
muxes might need to be set. This can be implemented using mux-states
property. Therefore, document the same in the respective bindings.
Rob Herring [Thu, 3 Mar 2022 23:23:49 +0000 (17:23 -0600)]
dt-bindings: mfd: Fix pinctrl node name warnings
The recent addition pinctrl.yaml in commit 644b044d226b ("dt-bindings:
pinctrl: use pinctrl.yaml") resulted in some node name warnings:
Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \
lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \
codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \
pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Fix the node names to the preferred 'pinctrl'. For cirrus,madera,
nothing from pinctrl.yaml schema is used, so just drop the reference.
Fixes: 644b044d226b ("dt-bindings: pinctrl: use pinctrl.yaml") Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220303232350.2591143-1-robh@kernel.org
Jisheng Zhang [Fri, 4 Mar 2022 07:55:59 +0000 (15:55 +0800)]
MAINTAINERS: Update Jisheng's email address
I'm leaving synaptics. Update my email address to my korg mail
address and add entries to .mailmap as well to map my work
addresses to korg mail address.
ARM: include unprivileged BPF status in Spectre V2 reporting
The mitigations for Spectre-BHB are only applied when an exception
is taken, but when unprivileged BPF is enabled, userspace can
load BPF programs that can be used to exploit the problem.
When unprivileged BPF is enabled, report the vulnerable status via
the spectre_v2 sysfs file.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Robert Foss [Tue, 8 Mar 2022 09:49:10 +0000 (10:49 +0100)]
dt-bindings: drm/bridge: anx7625: Revert DPI support
Revert DPI support from binding.
DPI support relies on the bus-type enum which does not yet support
Mipi DPI, since no v4l2_fwnode_bus_type has been defined for this
bus type.
When DPI for anx7625 was initially added, it assumed that
V4L2_FWNODE_BUS_TYPE_PARALLEL was the correct bus type for
representing DPI, which it is not.
In order to prevent adding this mis-usage to the ABI, let's revert
the support.
Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This change breaks existing setups where conntrack is used with
asymmetric paths.
In these cases, the NAT transformation occurs on the syn-ack instead of
the syn:
1. SYN x:12345 -> y -> 443 // sent by initiator, receiverd by responder
2. SYNACK y:443 -> x:12345 // First packet seen by conntrack, as sent by responder
3. tuple_force_port_remap() gets called, sees:
'tcp from 443 to port 12345 NAT' -> pick a new source port, inititor receives
4. SYNACK y:$RANDOM -> x:12345 // connection is never established
While its possible to avoid the breakage with NOTRACK rules, a kernel
update should not break working setups.
An alternative to the revert is to augment conntrack to tag
mid-stream connections plus more code in the nat core to skip NAT
for such connections, however, this leads to more interaction/integration
between conntrack and NAT.
Therefore, revert, users will need to add explicit nat rules to avoid
port shadowing.
[ 0.742963] aspeed-g6-pinctrl 1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep 1e620000.spi
pin 196 (AE12): device 1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device 1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device 1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device 1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device 1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device 1e620000.spi function FWSPID group FWQSPID
Arnd Bergmann [Tue, 8 Mar 2022 12:43:41 +0000 (13:43 +0100)]
Merge tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Device tree fixes for v5.17
One more patch to fix up eDP panels on Nyan FHD models.
* tag 'tegra-for-5.17-arm-dt-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Move Nyan FHD panels to AUX bus
ARM: tegra: Move panels to AUX bus
Biju Das [Mon, 7 Mar 2022 18:48:43 +0000 (18:48 +0000)]
spi: Fix invalid sgs value
max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.
Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Catalin Marinas [Thu, 3 Mar 2022 18:00:44 +0000 (18:00 +0000)]
arm64: Ensure execute-only permissions are not allowed without EPAN
Commit f5f5f2f7c857 ("arm64: Support execute-only permissions with
Enhanced PAN") re-introduced execute-only permissions when EPAN is
available. When EPAN is not available, arch_filter_pgprot() is supposed
to change a PAGE_EXECONLY permission into PAGE_READONLY_EXEC. However,
if BTI or MTE are present, such check does not detect the execute-only
pgprot in the presence of PTE_GP (BTI) or MT_NORMAL_TAGGED (MTE),
allowing the user to request PROT_EXEC with PROT_BTI or PROT_MTE.
Remove the arch_filter_pgprot() function, change the default VM_EXEC
permissions to PAGE_READONLY_EXEC and update the protection_map[] array
at core_initcall() if EPAN is detected.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: f5f5f2f7c857 ("arm64: Support execute-only permissions with Enhanced PAN") Cc: <stable@vger.kernel.org> # 5.13.x Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Linus Torvalds [Tue, 8 Mar 2022 01:29:47 +0000 (17:29 -0800)]
Merge tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
projects / kernel.git / log