Kyle Huey [Tue, 3 May 2022 05:01:36 +0000 (22:01 -0700)]
KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_id
Zen renumbered some of the performance counters that correspond to the
well known events in perf_hw_id. This code in KVM was never updated for
that, so guest that attempt to use counters on Zen that correspond to the
pre-Zen perf_hw_id values will silently receive the wrong values.
This has been observed in the wild with rr[0] when running in Zen 3
guests. rr uses the retired conditional branch counter 00d1 which is
incorrectly recognized by KVM as PERF_COUNT_HW_STALLED_CYCLES_BACKEND.
[0] https://rr-project.org/
Signed-off-by: Kyle Huey <me@kylehuey.com>
Message-Id: <20220503050136.86298-1-khuey@kylehuey.com> Cc: stable@vger.kernel.org
[Check guest family, not host. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: fix potential races when walking host page table
KVM uses lookup_address_in_mm() to detect the hugepage size that the host
uses to map a pfn. The function suffers from several issues:
- no usage of READ_ONCE(*). This allows multiple dereference of the same
page table entry. The TOCTOU problem because of that may cause KVM to
incorrectly treat a newly generated leaf entry as a nonleaf one, and
dereference the content by using its pfn value.
- the information returned does not match what KVM needs; for non-present
entries it returns the level at which the walk was terminated, as long
as the entry is not 'none'. KVM needs level information of only 'present'
entries, otherwise it may regard a non-present PXE entry as a present
large page mapping.
- the function is not safe for mappings that can be torn down, because it
does not disable IRQs and because it returns a PTE pointer which is never
safe to dereference after the function returns.
So implement the logic for walking host page tables directly in KVM, and
stop using lookup_address_in_mm().
Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220429031757.2042406-1-mizhang@google.com>
[Inline in host_pfn_mapping_level, ensure no semantic change for its
callers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 Apr 2022 10:30:13 +0000 (12:30 +0200)]
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
Disallow memslots and MMIO SPTEs whose gpa range would exceed the host's
MAXPHYADDR, i.e. don't create SPTEs for gfns that exceed host.MAXPHYADDR.
The TDP MMU bounds its zapping based on host.MAXPHYADDR, and so if the
guest, possibly with help from userspace, manages to coerce KVM into
creating a SPTE for an "impossible" gfn, KVM will leak the associated
shadow pages (page tables):
On bare metal, encountering an impossible gpa in the page fault path is
well and truly impossible, barring CPU bugs, as the CPU will signal #PF
during the gva=>gpa translation (or a similar failure when stuffing a
physical address into e.g. the VMCS/VMCB). But if KVM is running as a VM
itself, the MAXPHYADDR enumerated to KVM may not be the actual MAXPHYADDR
of the underlying hardware, in which case the hardware will not fault on
the illegal-from-KVM's-perspective gpa.
Alternatively, KVM could continue allowing the dodgy behavior and simply
zap the max possible range. But, for hosts with MAXPHYADDR < 52, that's
a (minor) waste of cycles, and more importantly, KVM can't reasonably
support impossible memslots when running on bare metal (or with an
accurate MAXPHYADDR as a VM). Note, limiting the overhead by checking if
KVM is running as a guest is not a safe option as the host isn't required
to announce itself to the guest in any way, e.g. doesn't need to set the
HYPERVISOR CPUID bit.
A second alternative to disallowing the memslot behavior would be to
disallow creating a VM with guest.MAXPHYADDR > host.MAXPHYADDR. That
restriction is undesirable as there are legitimate use cases for doing
so, e.g. using the highest host.MAXPHYADDR out of a pool of heterogeneous
systems so that VMs can be migrated between hosts with different
MAXPHYADDRs without running afoul of the allow_smaller_maxphyaddr mess.
Note that any guest.MAXPHYADDR is valid with shadow paging, and it is
even useful in order to test KVM with MAXPHYADDR=52 (i.e. without
any reserved physical address bits).
The now common kvm_mmu_max_gfn() is inclusive instead of exclusive.
The memslot and TDP MMU code want an exclusive value, but the name
implies the returned value is inclusive, and the MMIO path needs an
inclusive check.
Fixes: 56d8cae20031 ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 649661b38868 ("KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Ben Gardon <bgardon@google.com> Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220428233416.2446833-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU
The following WARN is triggered from kvm_vm_ioctl_set_clock():
WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20
Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
Call Trace:
<TASK>
? kvm_write_guest+0x114/0x120 [kvm]
kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
? schedule+0x4e/0xc0
? __cond_resched+0x1a/0x50
? futex_wait+0x166/0x250
? __send_signal+0x1f1/0x3d0
kvm_vm_ioctl+0x747/0xda0 [kvm]
...
The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
vcpu_fp uses the riscv_isa_extension mechanism which gets
defined in hwcap.h but doesn't include that head file.
While it seems to work in most cases, in certain conditions
this can lead to build failures like
../arch/riscv/kvm/vcpu_fp.c: In function ‘kvm_riscv_vcpu_fp_reset’:
../arch/riscv/kvm/vcpu_fp.c:22:13: error: implicit declaration of function ‘riscv_isa_extension_available’ [-Werror=implicit-function-declaration]
22 | if (riscv_isa_extension_available(&isa, f) ||
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/riscv/kvm/vcpu_fp.c:22:49: error: ‘f’ undeclared (first use in this function)
22 | if (riscv_isa_extension_available(&isa, f) ||
Fix this by simply including the necessary header.
Fixes: 7f5cce0f157c ("RISC-V: KVM: Factor-out FP virtualization into separate
sources") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Anup Patel <anup@brainfault.org>
KVM: selftests: riscv: Fix alignment of the guest_hang() function
The guest_hang() function is used as the default exception handler
for various KVM selftests applications by setting it's address in
the vstvec CSR. The vstvec CSR requires exception handler base address
to be at least 4-byte aligned so this patch fixes alignment of the
guest_hang() function.
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
Supporting hardware updates of PTE A and D bits is optional for any
RISC-V implementation so current software strategy is to always set
these bits in both G-stage (hypervisor) and VS-stage (guest kernel).
If PTE A and D bits are not set by software (hypervisor or guest)
then RISC-V implementations not supporting hardware updates of these
bits will cause traps even for perfectly valid PTEs.
Based on above explanation, the VS-stage page table created by various
KVM selftest applications is not correct because PTE A and D bits are
not set. This patch fixes VS-stage page table programming of PTE A and
D bits for KVM selftests.
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
We might have RISC-V systems (such as QEMU) where VMID is not part
of the TLB entry tag so these systems will have to flush all TLB
entries upon any change in hgatp.VMID.
Currently, we zero-out hgatp CSR in kvm_arch_vcpu_put() and we
re-program hgatp CSR in kvm_arch_vcpu_load(). For above described
systems, this will flush all TLB entries whenever VCPU exits to
user-space hence reducing performance.
This patch fixes above described performance issue by not clearing
hgatp CSR in kvm_arch_vcpu_put().
Oliver Upton [Wed, 6 Apr 2022 23:56:15 +0000 (23:56 +0000)]
selftests: KVM: Free the GIC FD when cleaning up in arch_timer
In order to correctly destroy a VM, all references to the VM must be
freed. The arch_timer selftest creates a VGIC for the guest, which
itself holds a reference to the VM.
Oliver Upton [Wed, 6 Apr 2022 23:56:14 +0000 (23:56 +0000)]
selftests: KVM: Don't leak GIC FD across dirty log test iterations
dirty_log_perf_test instantiates a VGICv3 for the guest (if supported by
hardware) to reduce the overhead of guest exits. However, the test does
not actually close the GIC fd when cleaning up the VM between test
iterations, meaning that the VM is never actually destroyed in the
kernel.
While this is generally a bad idea, the bug was detected from the kernel
spewing about duplicate debugfs entries as subsequent VMs happen to
reuse the same FD even though the debugfs directory is still present.
Abstract away the notion of setup/cleanup of the GIC FD from the test
by creating arch-specific helpers for test setup/cleanup. Close the GIC
FD on VM cleanup and do nothing for the other architectures.
Fixes: aee4bd55c389 ("KVM: selftests: Add vgic initialization for dirty log perf test for ARM") Reviewed-by: Jing Zhang <jingzhangos@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-3-oupton@google.com
Oliver Upton [Wed, 6 Apr 2022 23:56:13 +0000 (23:56 +0000)]
KVM: Don't create VM debugfs files outside of the VM directory
Unfortunately, there is no guarantee that KVM was able to instantiate a
debugfs directory for a particular VM. To that end, KVM shouldn't even
attempt to create new debugfs files in this case. If the specified
parent dentry is NULL, debugfs_create_file() will instantiate files at
the root of debugfs.
For arm64, it is possible to create the vgic-state file outside of a
VM directory, the file is not cleaned up when a VM is destroyed.
Nonetheless, the corresponding struct kvm is freed when the VM is
destroyed.
Nip the problem in the bud for all possible errant debugfs file
creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing,
debugfs_create_file() will fail instead of creating the file in the root
directory.
Cc: stable@kernel.org Fixes: 9224dbb621bc ("kvm: no need to check return value of debugfs_create functions") Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com
When testing a kernel with commit 30b31c42b05d ("KVM: arm64:
Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
get-reg-list output
vregs: Number blessed registers: 234
vregs: Number registers: 238
vregs: There are 1 new registers.
Consider adding them to the blessed reg list with the following lines:
KVM_REG_ARM_FW_REG(3),
vregs: PASS
...
That output inspired two changes: 1) add the new register to the
blessed list and 2) explain why "Number registers" is actually four
larger than "Number blessed registers" (on the system used for
testing), even though only one register is being stated as new.
The reason is that some registers are host dependent and they get
filtered out when comparing with the blessed list. The system
used for the test apparently had three filtered registers.
Paolo Bonzini [Wed, 6 Apr 2022 17:13:42 +0000 (13:13 -0400)]
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL. Afterwards, it calls
kvm_arch_vcpu_destroy().
However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():
Introduce a test for aarch64 that ensures non-mixed-width vCPUs
(all 64bit vCPUs or all 32bit vcPUs) can be configured, and
mixed-width vCPUs cannot be configured.
Reiji Watanabe [Tue, 29 Mar 2022 03:19:23 +0000 (20:19 -0700)]
KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs
KVM allows userspace to configure either all EL1 32bit or 64bit vCPUs
for a guest. At vCPU reset, vcpu_allowed_register_width() checks
if the vcpu's register width is consistent with all other vCPUs'.
Since the checking is done even against vCPUs that are not initialized
(KVM_ARM_VCPU_INIT has not been done) yet, the uninitialized vCPUs
are erroneously treated as 64bit vCPU, which causes the function to
incorrectly detect a mixed-width VM.
Introduce KVM_ARCH_FLAG_EL1_32BIT and KVM_ARCH_FLAG_REG_WIDTH_CONFIGURED
bits for kvm->arch.flags. A value of the EL1_32BIT bit indicates that
the guest needs to be configured with all 32bit or 64bit vCPUs, and
a value of the REG_WIDTH_CONFIGURED bit indicates if a value of the
EL1_32BIT bit is valid (already set up). Values in those bits are set at
the first KVM_ARM_VCPU_INIT for the guest based on KVM_ARM_VCPU_EL1_32BIT
configuration for the vCPU.
Check vcpu's register width against those new bits at the vcpu's
KVM_ARM_VCPU_INIT (instead of against other vCPUs' register width).
Fixes: 495162e28a5d ("KVM: arm64: Prevent mixed-width VM creation") Signed-off-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220329031924.619453-2-reijiw@google.com
Oliver Upton [Fri, 1 Apr 2022 19:46:52 +0000 (19:46 +0000)]
KVM: arm64: Don't split hugepages outside of MMU write lock
It is possible to take a stage-2 permission fault on a page larger than
PAGE_SIZE. For example, when running a guest backed by 2M HugeTLB, KVM
eagerly maps at the largest possible block size. When dirty logging is
enabled on a memslot, KVM does *not* eagerly split these 2M stage-2
mappings and instead clears the write bit on the pte.
Since dirty logging is always performed at PAGE_SIZE granularity, KVM
lazily splits these 2M block mappings down to PAGE_SIZE in the stage-2
fault handler. This operation must be done under the write lock. Since
commit fa4005d9aada ("KVM: arm64: Add fast path to handle permission
relaxation during dirty logging"), the stage-2 fault handler
conditionally takes the read lock on permission faults with dirty
logging enabled. To that end, it is possible to split a 2M block mapping
while only holding the read lock.
The problem is demonstrated by running kvm_page_table_test with 2M
anonymous HugeTLB, which splats like so:
WARNING: CPU: 5 PID: 15276 at arch/arm64/kvm/hyp/pgtable.c:153 stage2_map_walk_leaf+0x124/0x158
Fix the issue by only acquiring the read lock if the guest faulted on a
PAGE_SIZE granule w/ dirty logging enabled. Add a WARN to catch locking
bugs in future changes.
Fixes: fa4005d9aada ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging") Cc: Jing Zhang <jingzhangos@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220401194652.950240-1-oupton@google.com
Oliver Upton [Tue, 22 Mar 2022 18:35:38 +0000 (18:35 +0000)]
KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler
We already sanitize the guest's PSCI version when it is being written by
userspace, rejecting unsupported version numbers. Additionally, the
'minor' parameter to kvm_psci_1_x_call() is a constant known at compile
time for all callsites.
Though it is benign, the additional check against the
PSCI kvm_psci_1_x_call() is unnecessary and likely to be missed the next
time KVM raises its maximum PSCI version. Drop the check altogether and
rely on sanitization when the PSCI version is set by userspace.
Oliver Upton [Tue, 22 Mar 2022 18:35:37 +0000 (18:35 +0000)]
KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32
The SMCCC does not allow the SMC64 calling convention to be used from
AArch32. While KVM checks to see if the calling convention is allowed in
PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to
unadvertised PSCI v1.0+ functions.
Hoist the check to see if the requested function is allowed into
kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all
PSCI versions.
Fixes: df3e5c4932bd ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest") Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220322183538.2757758-3-oupton@google.com
Oliver Upton [Tue, 22 Mar 2022 18:35:36 +0000 (18:35 +0000)]
KVM: arm64: Generally disallow SMC64 for AArch32 guests
The only valid calling SMC calling convention from an AArch32 state is
SMC32. Disallow any PSCI function that sets the SMC64 function ID bit
when called from AArch32 rather than comparing against known SMC64 PSCI
functions.
Note that without this change KVM advertises the SMC64 flavor of
SYSTEM_RESET2 to AArch32 guests.
Fixes: df3e5c4932bd ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest") Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Reiji Watanabe <reijiw@google.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220322183538.2757758-2-oupton@google.com
KVM: x86/mmu: Resolve nx_huge_pages when kvm.ko is loaded
Resolve nx_huge_pages to true/false when kvm.ko is loaded, leaving it as
-1 is technically undefined behavior when its value is read out by
param_get_bool(), as boolean values are supposed to be '0' or '1'.
Alternatively, KVM could define a custom getter for the param, but the
auto value doesn't depend on the vendor module in any way, and printing
"auto" would be unnecessarily unfriendly to the user.
In addition to fixing the undefined behavior, resolving the auto value
also fixes the scenario where the auto value resolves to N and no vendor
module is loaded. Previously, -1 would result in Y being printed even
though KVM would ultimately disable the mitigation.
Rename the existing MMU module init/exit helpers to clarify that they're
invoked with respect to the vendor module, and add comments to document
why KVM has two separate "module init" flows.
=========================================================================
UBSAN: invalid-load in kernel/params.c:320:33
load of value 255 is not a valid value for type '_Bool'
CPU: 6 PID: 892 Comm: tail Not tainted 5.17.0-rc3+ #799
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value.cold+0x43/0x48
param_get_bool.cold+0xf/0x14
param_attr_show+0x55/0x80
module_attr_show+0x1c/0x30
sysfs_kf_seq_show+0x93/0xc0
seq_read_iter+0x11c/0x450
new_sync_read+0x11b/0x1a0
vfs_read+0xf0/0x190
ksys_read+0x5f/0xe0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
=========================================================================
Fixes: e1f01549e95e ("kvm: mmu: ITLB_MULTIHIT mitigation") Cc: stable@vger.kernel.org Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220331221359.3912754-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
Stephen Boyd [Sun, 3 Apr 2022 02:28:18 +0000 (19:28 -0700)]
Revert "clk: Drop the rate range on clk_put()"
This reverts commit eaef78700d60cb45dcf7b268fee78e7230b54c62. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Merge tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.
It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config). Then we can work finding a better API. If that fails,
then it will need to be completely reverted.
To not have the code silently bitrot, still allow building it with
COMPILE_TEST.
And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.
Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile. This is a good way to remind us to move the header
back.
tracing: Move user_events.h temporarily out of include/uapi
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Christophe Leroy [Wed, 30 Mar 2022 07:00:19 +0000 (09:00 +0200)]
ftrace: Make ftrace_graph_is_dead() a static branch
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.
tracing: Rename the staging files for trace_events
When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Li RongQing [Wed, 9 Mar 2022 08:35:44 +0000 (16:35 +0800)]
KVM: x86: fix sending PV IPI
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: 189dfa9f93d ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Mar 2022 16:56:24 +0000 (12:56 -0400)]
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit cf2aaeb94b9a ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org> Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: f335d3af0395 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhenzhong Duan [Fri, 11 Mar 2022 10:26:42 +0000 (18:26 +0800)]
KVM: x86: cleanup enter_rmode()
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sun, 13 Mar 2022 14:05:22 +0000 (15:05 +0100)]
KVM: MIPS: remove reference to trap&emulate virtualization
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 15 Mar 2022 22:17:15 +0000 (18:17 -0400)]
KVM: x86: document limitations of MSR filtering
MSR filtering requires an exit to userspace that is hard to implement and
would be very slow in the case of nested VMX vmexit and vmentry MSR
accesses. Document the limitation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Mon, 7 Mar 2022 12:26:33 +0000 (20:26 +0800)]
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Wed, 2 Mar 2022 13:15:14 +0000 (21:15 +0800)]
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
When RDTSCP is supported but RDPID is not supported in host,
RDPID emulation is available. However, __kvm_get_msr() would
only fail when RDTSCP/RDPID both are disabled in guest, so
the emulator wouldn't inject a #UD when RDPID is disabled but
RDTSCP is enabled in guest.
Like Xu [Wed, 9 Mar 2022 08:42:57 +0000 (16:42 +0800)]
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
HSW_IN_TX* bits are used in generic code which are not supported on
AMD. Worse, these bits overlap with AMD EventSelect[11:8] and hence
using HSW_IN_TX* bits unconditionally in generic code is resulting in
unintentional pmu behavior on AMD. For example, if EventSelect[11:8]
is 0x2, pmc_reprogram_counter() wrongly assumes that
HSW_IN_TX_CHECKPOINTED is set and thus forces sampling period to be 0.
Also per the SDM, both bits 32 and 33 "may only be set if the processor
supports HLE or RTM" and for "IN_TXCP (bit 33): this bit may only be set
for IA32_PERFEVTSEL2."
Opportunistically eliminate code redundancy, because if the HSW_IN_TX*
bit is set in pmc->eventsel, it is already set in attr.config.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reported-by: Jim Mattson <jmattson@google.com> Fixes: 63ed641cef8f ("perf, kvm: Support the in_tx/in_tx_cp modifiers in KVM arch perfmon emulation v5") Co-developed-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220309084257.88931-1-likexu@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Sat, 26 Feb 2022 23:41:31 +0000 (15:41 -0800)]
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ad8737ca5403 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by: Lotus Fenn <lotusf@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Like Xu <likexu@tencent.com> Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Trace all APICv inhibit changes and capture overall status
Trace all APICv inhibit changes instead of just those that result in
APICv being (un)inhibited, and log the current state. Debugging why
APICv isn't working is frustrating as it's hard to see why APICv is still
inhibited, and logging only the first inhibition means unnecessary onion
peeling.
Opportunistically drop the export of the tracepoint, it is not and should
not be used by vendor code due to the need to serialize toggling via
apicv_update_lock.
Note, using the common flow means kvm_apicv_init() switched from atomic
to non-atomic bitwise operations. The VM is unreachable at init, so
non-atomic is perfectly ok.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Add wrappers for setting/clearing APICv inhibits
Add set/clear wrappers for toggling APICv inhibits to make the call sites
more readable, and opportunistically rename the inner helpers to align
with the new wrappers and to make them more readable as well. Invert the
flag from "activate" to "set"; activate is painfully ambiguous as it's
not obvious if the inhibit is being activated, or if APICv is being
activated, in which case the inhibit is being deactivated.
For the functions that take @set, swap the order of the inhibit reason
and @set so that the call sites are visually similar to those that bounce
through the wrapper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
Use an enum for the APICv inhibit reasons, there is no meaning behind
their values and they most definitely are not "unsigned longs". Rename
the various params to "reason" for consistency and clarity (inhibit may
be confused as a command, i.e. inhibit APICv, instead of the reason that
is getting toggled/checked).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220311043517.17027-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:44 +0000 (15:03 +0800)]
KVM: X86: Handle implicit supervisor access with SMAP
There are two kinds of implicit supervisor access
implicit supervisor access when CPL = 3
implicit supervisor access when CPL < 3
Current permission_fault() handles only the first kind for SMAP.
But if the access is implicit when SMAP is on, data may not be read
nor write from any user-mode address regardless the current CPL.
So the second kind should be also supported.
The first kind can be detect via CPL and access mode: if it is
supervisor access and CPL = 3, it must be implicit supervisor access.
But it is not possible to detect the second kind without extra
information, so this patch adds an artificial PFERR_EXPLICIT_ACCESS
into @access. This extra information also works for the first kind, so
the logic is changed to use this information for both cases.
The value of PFERR_EXPLICIT_ACCESS is deliberately chosen to be bit 48
which is in the most significant 16 bits of u64 and less likely to be
forced to change due to future hardware uses it.
This patch removes the call to ->get_cpl() for access mode is determined
by @access. Not only does it reduce a function call, but also remove
confusions when the permission is checked for nested TDP. The nested
TDP shouldn't have SMAP checking nor even the L2's CPL have any bearing
on it. The original code works just because it is always user walk for
NPT and SMAP fault is not set for EPT in update_permission_bitmask.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-5-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:43 +0000 (15:03 +0800)]
KVM: X86: Rename variable smap to not_smap in permission_fault()
Comments above the variable says the bit is set when SMAP is overridden
or the same meaning in update_permission_bitmask(): it is not subjected
to SMAP restriction.
Renaming it to reflect the negative implication and make the code better
readability.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-4-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:42 +0000 (15:03 +0800)]
KVM: X86: Fix comments in update_permission_bitmask
The commit 4c3453895667 ("KVM: MMU: speedup update_permission_bitmask")
refactored the code of update_permission_bitmask() and change the
comments. It added a condition into a list to match the new code,
so the number/order for conditions in the comments should be updated
too.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-3-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lai Jiangshan [Fri, 11 Mar 2022 07:03:41 +0000 (15:03 +0800)]
KVM: X86: Change the type of access u32 to u64
Change the type of access u32 to u64 for FNAME(walk_addr) and
->gva_to_gpa().
The kinds of accesses are usually combinations of UWX, and VMX/SVM's
nested paging adds a new factor of access: is it an access for a guest
page table or for a final guest physical address.
And SMAP relies a factor for supervisor access: explicit or implicit.
So @access in FNAME(walk_addr) and ->gva_to_gpa() is better to include
all these information to do the walk.
Although @access(u32) has enough bits to encode all the kinds, this
patch extends it to u64:
o Extra bits will be in the higher 32 bits, so that we can
easily obtain the traditional access mode (UWX) by converting
it to u32.
o Reuse the value for the access kind defined by SVM's nested
paging (PFERR_GUEST_FINAL_MASK and PFERR_GUEST_PAGE_MASK) as
@error_code in kvm_handle_page_fault().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220311070346.45023-2-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Thu, 3 Mar 2022 15:41:12 +0000 (15:41 +0000)]
KVM: Remove dirty handling from gfn_to_pfn_cache completely
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Use enum to track if cached PFN will be used in guest and/or host
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code
with a unified enum/bitmask. Using explicit names makes it easier to
review and audit call sites.
Opportunistically add a WARN to prevent passing garbage; instantating a
cache without declaring its usage is either buggy or pointless.
Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Gonda [Fri, 4 Mar 2022 16:10:32 +0000 (08:10 -0800)]
KVM: SVM: Fix kvm_cache_regs.h inclusions for is_guest_mode()
Include kvm_cache_regs.h to pick up the definition of is_guest_mode(),
which is referenced by nested_svm_virtualize_tpr() in svm.h. Remove
include from svm_onhpyerv.c which was done only because of lack of
include in svm.h.
Fixes: bec77d4f997cd ("KVM: SVM: Move Nested SVM Implementation to nested.c") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220304161032.2270688-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Tue, 8 Mar 2022 01:24:52 +0000 (17:24 -0800)]
KVM: x86/pmu: Use different raw event masks for AMD and Intel
The third nybble of AMD's event select overlaps with Intel's IN_TX and
IN_TXCP bits. Therefore, we can't use AMD64_RAW_EVENT_MASK on Intel
platforms that support TSX.
Declare a raw_event_mask in the kvm_pmu structure, initialize it in
the vendor-specific pmu_refresh() functions, and use that mask for
PERF_TYPE_RAW configurations in reprogram_gp_counter().
Fixes: 2eb4d7b80126 ("KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW") Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220308012452.3468611-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Don't actually set a request when evicting vCPUs for GFN cache invd
Don't actually set a request bit in vcpu->requests when making a request
purely to force a vCPU to exit the guest. Logging a request but not
actually consuming it would cause the vCPU to get stuck in an infinite
loop during KVM_RUN because KVM would see the pending request and bail
from VM-Enter to service the request.
Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as
nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all
too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init()
without implementing handling of the request, especially since getting
test coverage of MMU notifier interaction with specific KVM features
usually requires a directed test.
Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus
to evict_vcpus. The purpose of the request is to get vCPUs out of guest
mode, it's supposed to _avoid_ waking vCPUs that are blocking.
Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to
what it wants to accomplish, and to genericize the name so that it can
used for similar but unrelated scenarios, should they arise in the future.
Add a comment and documentation to explain why the "no action" request
exists.
Add compile-time assertions to help detect improper usage. Use the inner
assertless helper in the one s390 path that makes requests without a
hardcoded request.
Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Tue, 29 Mar 2022 17:11:47 +0000 (13:11 -0400)]
KVM: avoid double put_page with gfn-to-pfn cache
If the cache's user host virtual address becomes invalid, there
is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc()
could release the pfn but the gpc->pfn field has not been overwritten
with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will
call put_page again on the same page.
Cc: stable@vger.kernel.org Fixes: 6c84388d65b5 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support") Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Zap only TDP MMU leafs in zap range and mmu_notifier unmap
Re-introduce zapping only leaf SPTEs in kvm_zap_gfn_range() and
kvm_tdp_mmu_unmap_gfn_range(), this time without losing a pending TLB
flush when processing multiple roots (including nested TDP shadow roots).
Dropping the TLB flush resulted in random crashes when running Hyper-V
Server 2019 in a guest with KSM enabled in the host (or any source of
mmu_notifier invalidations, KSM is just the easiest to force).
Vmx have been fix this in commit ed17bb81b81d (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.
Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 25 Mar 2022 16:42:52 +0000 (12:42 -0400)]
KVM: MMU: propagate alloc_workqueue failure
If kvm->arch.tdp_mmu_zap_wq cannot be created, the failure has
to be propagated up to kvm_mmu_init_vm and kvm_arch_init_vm.
kvm_arch_init_vm also has to undo all the initialization, so
group all the MMU initialization code at the beginning and
handle cleaning up of kvm_page_track_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"Assorted bits and pieces"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: drop needless assignment in aio_read()
clean overflow checks in count_mounts() a bit
seq_file: fix NULL pointer arithmetic warning
uml/x86: use x86 load_unaligned_zeropad()
asm/user.h: killed unused macros
constify struct path argument of finish_automount()/do_add_mount()
fs: Remove FIXME comment in generic_write_checks()
Merge tag 'vfs-5.18-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs fix from Darrick Wong:
"The erofs developers felt that FIEMAP should handle ranged requests
starting at s_maxbytes by returning EFBIG instead of passing the
filesystem implementation a nonsense 0-byte request.
Not sure why they keep tagging this 'iomap', but the VFS shouldn't be
asking for information about ranges of a file that the filesystem
already declared that it does not support.
- Fix a potential infinite loop in FIEMAP by fixing an off by one
error when comparing the requested range against s_maxbytes"
* tag 'vfs-5.18-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: fix an infinite loop in iomap_fiemap
Merge tag 'xfs-5.18-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This fixes multiple problems in the reserve pool sizing functions: an
incorrect free space calculation, a pointless infinite loop, and even
more braindamage that could result in the pool being overfilled. The
pile of patches from Dave fix myriad races and UAF bugs in the log
recovery code that much to our mutual surprise nobody's tripped over.
Dave also fixed a performance optimization that had turned into a
regression.
Dave Chinner is taking over as XFS maintainer starting Sunday and
lasting until 5.19-rc1 is tagged so that I can focus on starting a
massive design review for the (feature complete after five years)
online repair feature. From then on, he and I will be moving XFS to a
co-maintainership model by trading duties every other release.
NOTE: I hope very strongly that the other pieces of the (X)FS
ecosystem (fstests and xfsprogs) will make similar changes to spread
their maintenance load.
Summary:
- Fix an incorrect free space calculation in xfs_reserve_blocks that
could lead to a request for free blocks that will never succeed.
- Fix a hang in xfs_reserve_blocks caused by an infinite loop and the
incorrect free space calculation.
- Fix yet a third problem in xfs_reserve_blocks where multiple racing
threads can overfill the reserve pool.
- Fix an accounting error that lead to us reporting reserved space as
"available".
- Fix a race condition during abnormal fs shutdown that could cause
UAF problems when memory reclaim and log shutdown try to clean up
inodes.
- Fix a bug where log shutdown can race with unmount to tear down the
log, thereby causing UAF errors.
- Disentangle log and filesystem shutdown to reduce confusion.
- Fix some confusion in xfs_trans_commit such that a race between
transaction commit and filesystem shutdown can cause unlogged dirty
inode metadata to be committed, thereby corrupting the filesystem.
- Remove a performance optimization in the log as it was discovered
that certain storage hardware handle async log flushes so poorly as
to cause serious performance regressions. Recent restructuring of
other parts of the logging code mean that no performance benefit is
seen on hardware that handle it well"
* tag 'xfs-5.18-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: drop async cache flushes from CIL commits.
xfs: shutdown during log recovery needs to mark the log shutdown
xfs: xfs_trans_commit() path must check for log shutdown
xfs: xfs_do_force_shutdown needs to block racing shutdowns
xfs: log shutdown triggers should only shut down the log
xfs: run callbacks before waking waiters in xlog_state_shutdown_callbacks
xfs: shutdown in intent recovery has non-intent items in the AIL
xfs: aborting inodes on shutdown may need buffer lock
xfs: don't report reserved bnobt space as available
xfs: fix overfilling of reserve pool
xfs: always succeed at setting the reserve pool size
xfs: remove infinite loop when reserving free block pool
xfs: don't include bnobt blocks when reserving free block pool
xfs: document the XFS_ALLOC_AGFL_RESERVE constant
Merge tag 'riscv-for-linus-5.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- Fix the RISC-V section of the generic CPU idle bindings to comply
with the recently tightened DT schema.
* tag 'riscv-for-linus-5.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: Fix phandle-array issues in the idle-states bindings
Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
Merge tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Either fixes or a few additions that got missed in the initial merge
window pull. In detail:
- List iterator fix to avoid leaking value post loop (Jakob)
- One-off fix in minor count (Christophe)
- Fix for a regression in how io priority setting works for an
exiting task (Jiri)
- Fix a regression in this merge window with blkg_free() being called
in an inappropriate context (Ming)
- Misc fixes (Ming, Tom)"
* tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block:
blk-wbt: remove wbt_track stub
block: use dedicated list iterator variable
block: Fix the maximum minor value is blk_alloc_ext_minor()
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
block: avoid calling blkg_free() in atomic context
lib/sbitmap: allocate sb->map via kvzalloc_node
Merge tag 'for-5.18/io_uring-2022-04-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A little bit all over the map, some regression fixes for this merge
window, and some general fixes that are stable bound. In detail:
- Fix an SQPOLL memory ordering issue (Almog)
- Accept fixes (Dylan)
- Poll fixes (me)
- Fixes for provided buffers and recycling (me)
- Tweak to IORING_OP_MSG_RING command added in this merge window (me)
- Memory leak fix (Pavel)
- Misc fixes and tweaks (Pavel, me)"
* tag 'for-5.18/io_uring-2022-04-01' of git://git.kernel.dk/linux-block:
io_uring: defer msg-ring file validity check until command issue
io_uring: fail links if msg-ring doesn't succeeed
io_uring: fix memory leak of uid in files registration
io_uring: fix put_kbuf without proper locking
io_uring: fix invalid flags for io_put_kbuf()
io_uring: improve req fields comments
io_uring: enable EPOLLEXCLUSIVE for accept poll
io_uring: improve task work cache utilization
io_uring: fix async accept on O_NONBLOCK sockets
io_uring: remove IORING_CQE_F_MSG
io_uring: add flag for disabling provided buffer recycling
io_uring: ensure recv and recvmsg handle MSG_WAITALL correctly
io_uring: don't recycle provided buffer if punted to async worker
io_uring: fix assuming triggered poll waitqueue is the single poll
io_uring: bump poll refs to full 31-bits
io_uring: remove poll entry from list when canceling all
io_uring: fix memory ordering when SQPOLL thread goes to sleep
io_uring: ensure that fsnotify is always called
io_uring: recycle provided before arming poll
Merge tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM integrity shrink crash due to journal entry not being marked
unused.
- Fix DM bio polling to handle possibility that underlying device(s)
return BLK_STS_AGAIN during submission.
- Fix dm_io and dm_target_io flags race condition on Alpha.
- Add some pr_err debugging to help debug cases when DM ioctl structure
is corrupted.
* tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix bio polling to handle possibile BLK_STS_AGAIN
dm: fix dm_io and dm_target_io flags race condition on Alpha
dm integrity: set journal entry unused when shrinking device
dm ioctl: log an error if the ioctl structure is corrupted
dt-bindings: Fix phandle-array issues in the idle-states bindings
As per c40a46e78016 ("dt-bindings: Improve phandle-array schemas"), the
phandle-array bindings have been disambiguated. This fixes the new
RISC-V idle-states bindings to comply with the schema.
Fixes: ec36ab207048 ("dt-bindings: Add common bindings for ARM and RISC-V idle states") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Merge tag '5.18-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd updates from Steve French:
- three cleanup fixes
- shorten module load warning
- two documentation fixes
* tag '5.18-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: replace usage of found with dedicated list iterator variable
ksmbd: Remove a redundant zeroing of memory
MAINTAINERS: ksmbd: switch Sergey to reviewer
ksmbd: shorten experimental warning on loading the module
ksmbd: use netif_is_bridge_port
Documentation: ksmbd: update Feature Status table
Merge tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- three fixes for big endian issues in how Persistent and Volatile file
ids were stored
- Various misc. fixes: including some for oops, 2 for ioctls, 1 for
writeback
- cleanup of how tcon (tree connection) status is tracked
- Four changesets to move various duplicated protocol definitions
(defined both in cifs.ko and ksmbd) into smbfs_common/smb2pdu.h
- important performance improvement to use cached handles in some key
compounding code paths (reduces numbers of opens/closes sent in some
workloads)
- fix to allow alternate DFS target to be used to retry on a failed i/o
* tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix NULL ptr dereference in smb2_ioctl_query_info()
cifs: prevent bad output lengths in smb2_ioctl_query_info()
smb3: fix ksmbd bigendian bug in oplock break, and move its struct to smbfs_common
smb3: cleanup and clarify status of tree connections
smb3: move defines for query info and query fsinfo to smbfs_common
smb3: move defines for ioctl protocol header and SMB2 sizes to smbfs_common
[smb3] move more common protocol header definitions to smbfs_common
cifs: fix incorrect use of list iterator after the loop
ksmbd: store fids as opaque u64 integers
cifs: fix bad fids sent over wire
cifs: change smb2_query_info_compound to use a cached fid, if available
cifs: convert the path to utf16 in smb2_query_info_compound
cifs: writeback fix
cifs: do not skip link targets when an I/O fails
Merge tag 'exfat-for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Add keep_last_dots mount option to allow access to paths with
trailing dots
- Avoid repetitive volume dirty bit set/clear to improve storage life
time
* tag 'exfat-for-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: do not clear VolumeDirty in writeback
exfat: allow access to paths with trailing dots
Merge tag 'folio-5.18d' of git://git.infradead.org/users/willy/pagecache
Pull more filesystem folio updates from Matthew Wilcox:
"A mixture of odd changes that didn't quite make it into the original
pull and fixes for things that did. Also the readpages changes had to
wait for the NFS tree to be pulled first.
- Remove ->readpages infrastructure
- Remove AOP_FLAG_CONT_EXPAND
- Move read_descriptor_t to networking code
- Pass the iocb to generic_perform_write
- Minor updates to iomap, btrfs, ext4, f2fs, ntfs"
* tag 'folio-5.18d' of git://git.infradead.org/users/willy/pagecache:
btrfs: Remove a use of PAGE_SIZE in btrfs_invalidate_folio()
ntfs: Correct mark_ntfs_record_dirty() folio conversion
f2fs: Get the superblock from the mapping instead of the page
f2fs: Correct f2fs_dirty_data_folio() conversion
ext4: Correct ext4_journalled_dirty_folio() conversion
filemap: Remove AOP_FLAG_CONT_EXPAND
fs: Pass an iocb to generic_perform_write()
fs, net: Move read_descriptor_t to net.h
fs: Remove read_actor_t
iomap: Simplify is_partially_uptodate a little
readahead: Update comments
mm: remove the skip_page argument to read_pages
mm: remove the pages argument to read_pages
fs: Remove ->readpages address space operation
readahead: Remove read_cache_pages()
projects / kernel.git / log